Merge changes from topics "ls1088a", "ls1088a-prepare" into integration
* changes:
docs(layerscape): add ls1088a soc and board support
feat(ls1088aqds): add ls1088aqds board support
feat(ls1088ardb): add ls1088ardb board support
feat(ls1088a): add new SoC platform ls1088a
build(changelog): add new scopes for ls1088a
feat(bl2): add support to separate no-loadable sections
refactor(layerscape): refine comparison of inerconnection
feat(layerscape): add soc helper macro definition for chassis 3
feat(nxp-gic): add some macros definition for gicv3
feat(layerscape): add CHASSIS 3 support for tbbr
feat(layerscape): define more chassis 3 hardware address
feat(nxp-crypto): add chassis 3 support
feat(nxp-dcfg): add Chassis 3 support
feat(lx2): enable DDR erratas for lx2 platforms
feat(layerscape): print DDR errata information
feat(nxp-ddr): add workaround for errata A050958
feat(layerscape): add new soc errata a010539 support
feat(layerscape): add new soc errata a009660 support
feat(nxp-ddr): add rawcard 1F support
fix(layerscape): fix build issue of mmap_add_ddr_region_dynamically
fix(nxp-tools): fix create_pbl print log
build(changelog): add new scopes for NXP driver
diff --git a/Makefile b/Makefile
index fb50f0c..95c9075 100644
--- a/Makefile
+++ b/Makefile
@@ -1021,6 +1021,7 @@
RESET_TO_BL31 \
SAVE_KEYS \
SEPARATE_CODE_AND_RODATA \
+ SEPARATE_BL2_NOLOAD_REGION \
SEPARATE_NOBITS_REGION \
SPIN_ON_BL1_EXIT \
SPM_MM \
@@ -1136,6 +1137,7 @@
RAS_EXTENSION \
RESET_TO_BL31 \
SEPARATE_CODE_AND_RODATA \
+ SEPARATE_BL2_NOLOAD_REGION \
SEPARATE_NOBITS_REGION \
RECLAIM_INIT_CODE \
SPD_${SPD} \
diff --git a/bl2/bl2_el3.ld.S b/bl2/bl2_el3.ld.S
index bc1794c..6aa7afd 100644
--- a/bl2/bl2_el3.ld.S
+++ b/bl2/bl2_el3.ld.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -17,6 +17,11 @@
RAM (rwx): ORIGIN = BL2_RW_BASE, LENGTH = BL2_RW_LIMIT - BL2_RW_BASE
#else
RAM (rwx): ORIGIN = BL2_BASE, LENGTH = BL2_LIMIT - BL2_BASE
+#if SEPARATE_BL2_NOLOAD_REGION
+ RAM_NOLOAD (rw!a): ORIGIN = BL2_NOLOAD_START, LENGTH = BL2_NOLOAD_LIMIT - BL2_NOLOAD_START
+#else
+#define RAM_NOLOAD RAM
+#endif
#endif
}
@@ -106,9 +111,18 @@
__DATA_RAM_END__ = __DATA_END__;
RELA_SECTION >RAM
- STACK_SECTION >RAM
- BSS_SECTION >RAM
- XLAT_TABLE_SECTION >RAM
+#if SEPARATE_BL2_NOLOAD_REGION
+ SAVED_ADDR = .;
+ . = BL2_NOLOAD_START;
+ __BL2_NOLOAD_START__ = .;
+#endif
+ STACK_SECTION >RAM_NOLOAD
+ BSS_SECTION >RAM_NOLOAD
+ XLAT_TABLE_SECTION >RAM_NOLOAD
+#if SEPARATE_BL2_NOLOAD_REGION
+ __BL2_NOLOAD_END__ = .;
+ . = SAVED_ADDR;
+#endif
#if USE_COHERENT_MEM
/*
diff --git a/changelog.yaml b/changelog.yaml
index fa42e96..939fb65 100644
--- a/changelog.yaml
+++ b/changelog.yaml
@@ -349,6 +349,16 @@
- title: LS1046AQDS
scope: ls1046aqds
+ - title: LS1088A
+ scope: ls1088a
+
+ subsections:
+ - title: LS1088ARDB
+ scope: ls1088ardb
+
+ - title: LS1088AQDS
+ scope: ls1088aqds
+
- title: QEMU
scope: qemu
@@ -748,6 +758,12 @@
- title: NXP Crypto
scope: nxp-crypto
+ - title: DDR
+ scope: nxp-ddr
+
+ - title: GIC
+ scope: nxp-gic
+
- title: Renesas
scope: renesas-drivers
diff --git a/docs/about/maintainers.rst b/docs/about/maintainers.rst
index 2a4d683..b58ea71 100644
--- a/docs/about/maintainers.rst
+++ b/docs/about/maintainers.rst
@@ -573,6 +573,14 @@
:|F|: plat/nxp/soc-ls1046a/ls1046afrwy
:|F|: plat/nxp/soc-ls1046a/ls1046aqds
+NXP SoC Part LS1088A and its platform port
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+:|M|: Jiafei Pan <jiafei.pan@nxp.com>
+:|G|: `JiafeiPan`_
+:|F|: plat/nxp/soc-ls1088a
+:|F|: plat/nxp/soc-ls1088a/ls1088ardb
+:|F|: plat/nxp/soc-ls1088a/ls1088aqds
+
QEMU platform port
^^^^^^^^^^^^^^^^^^
:|M|: Jens Wiklander <jens.wiklander@linaro.org>
diff --git a/docs/getting_started/build-options.rst b/docs/getting_started/build-options.rst
index a34bb3c..adc05e6 100644
--- a/docs/getting_started/build-options.rst
+++ b/docs/getting_started/build-options.rst
@@ -647,6 +647,13 @@
``BL31_NOBITS_LIMIT``. When the option is ``0`` (the default), NOBITS
sections are placed in RAM immediately following the loaded firmware image.
+- ``SEPARATE_BL2_NOLOAD_REGION``: Setting this option to ``1`` allows the
+ NOLOAD sections of BL2 (.bss, stacks, page tables) to be allocated in RAM
+ discontiguous from loaded firmware images. When set, the platform need to
+ provide definitions of ``BL2_NOLOAD_START`` and ``BL2_NOLOAD_LIMIT``. This
+ flag is disabled by default and NOLOAD sections are placed in RAM immediately
+ following the loaded firmware image.
+
- ``SMC_PCI_SUPPORT``: This option allows platforms to handle PCI configuration
access requests via a standard SMCCC defined in `DEN0115`_. When combined with
UEFI+ACPI this can provide a certain amount of OS forward compatibility
@@ -961,7 +968,7 @@
--------------
-*Copyright (c) 2019-2021, Arm Limited. All rights reserved.*
+*Copyright (c) 2019-2022, Arm Limited. All rights reserved.*
.. _DEN0115: https://developer.arm.com/docs/den0115/latest
.. _PSA FW update specification: https://developer.arm.com/documentation/den0118/a/
diff --git a/docs/plat/nxp/nxp-layerscape.rst b/docs/plat/nxp/nxp-layerscape.rst
index 6cbd7f9..cd5874b 100644
--- a/docs/plat/nxp/nxp-layerscape.rst
+++ b/docs/plat/nxp/nxp-layerscape.rst
@@ -103,7 +103,7 @@
Arm Cortex-A72 cores with ECC-protected L1 and L2 cache memories for high
reliability, running up to 1.8 GHz.
-Details about LS1043A can be found at `ls1046a`_.
+Details about LS1046A can be found at `ls1046a`_.
- LS1046ARDB Board:
@@ -113,7 +113,7 @@
processor and is optimized to support the DDR4 memory and a full complement
of high-speed SerDes ports.
-Details about LS1043A RDB board can be found at `ls1046ardb`_.
+Details about LS1046A RDB board can be found at `ls1046ardb`_.
- LS1046AFRWY Board:
@@ -124,7 +124,28 @@
Ethernet, USB3.0 and M2_Type_E interfaces for Wi-Fi, FRWY-LS1046A-AC includes
the Wi-Fi card.
-Details about LS1043A RDB board can be found at `ls1046afrwy`_.
+Details about LS1046A FRWY board can be found at `ls1046afrwy`_.
+
+5. LS1088A
+
+- SoC Overview:
+
+The LS1088A family of multicore communications processors combines up to and eight
+Arm Cortex-A53 cores with the advanced, high-performance data path and network
+peripheral interfaces required for wireless access points, networking infrastructure,
+intelligent edge access, including virtual customer premise equipment (vCPE) and
+high-performance industrial applications.
+
+Details about LS1088A can be found at `ls1088a`_.
+
+- LS1088ARDB Board:
+
+The LS1088A reference design board provides a comprehensive platform that
+enables design and evaluation of the product (LS1088A processor). This RDB
+comes pre-loaded with a board support package (BSP) based on a standard
+Linux kernel.
+
+Details about LS1088A RDB board can be found at `ls1088ardb`_.
Table of supported boot-modes by each platform & platform that needs FIP-DDR:
-----------------------------------------------------------------------------
@@ -144,6 +165,8 @@
+---------------------+-------+--------+-------+-------+-------+-------------+--------------+-----------------+
| ls1046afrwy | yes | yes | | | | | | no |
+---------------------+-------+--------+-------+-------+-------+-------------+--------------+-----------------+
+| ls1088ardb | yes | yes | | | | | | no |
++---------------------+-------+--------+-------+-------+-------+-------------+--------------+-----------------+
Boot Sequence
@@ -336,7 +359,7 @@
-- Then reset to alternate bank to boot up ATF.
- Command for lx2160a and ls1028a platforms:
+ Command for lx2160a, ls1088a and ls1028a platforms:
.. code:: shell
@@ -370,7 +393,7 @@
-- Then reset to sd/emmc to boot up ATF from sd/emmc as boot-source.
- Command for lx2160A and ls1028a platforms:
+ Command for lx2160A, ls1088a and ls1028a platforms:
.. code:: shell
@@ -445,4 +468,6 @@
.. _ls1046a: https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/layerscape-processors/layerscape-1046a-and-1026a-processors:LS1046A
.. _ls1046ardb: https://www.nxp.com/design/qoriq-developer-resources/layerscape-ls1046a-reference-design-board:LS1046A-RDB
.. _ls1046afrwy: https://www.nxp.com/design/qoriq-developer-resources/ls1046a-freeway-board:FRWY-LS1046A
+.. _ls1088a: https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/layerscape-processors/layerscape-1088a-and-1048a-processor:LS1088A
+.. _ls1088ardb: https://www.nxp.com/design/qoriq-developer-resources/layerscape-ls1088a-reference-design-board:LS1088A-RDB
.. _nxp-ls-tbbr.rst: ./nxp-ls-tbbr.rst
diff --git a/drivers/nxp/dcfg/dcfg.c b/drivers/nxp/dcfg/dcfg.c
index a988c5d..e5c4db4 100644
--- a/drivers/nxp/dcfg/dcfg.c
+++ b/drivers/nxp/dcfg/dcfg.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2020-2021 NXP
+ * Copyright 2020-2022 NXP
*
* SPDX-License-Identifier: BSD-3-Clause
*
@@ -74,14 +74,11 @@
reg = gur_in32(dcfg_init_info->g_nxp_dcfg_addr + DCFG_DEVDISR5_OFFSET);
-#if defined(CONFIG_CHASSIS_3_2)
devdisr5_info.ddrc1_present = (reg & DISR5_DDRC1_MASK) ? 0 : 1;
+#if defined(CONFIG_CHASSIS_3_2)
devdisr5_info.ddrc2_present = (reg & DISR5_DDRC2_MASK) ? 0 : 1;
- devdisr5_info.ocram_present = (reg & DISR5_OCRAM_MASK) ? 0 : 1;
-#elif defined(CONFIG_CHASSIS_2)
- devdisr5_info.ddrc1_present = (reg & DISR5_DDRC1_MASK) ? 0 : 1;
- devdisr5_info.ocram_present = (reg & DISR5_OCRAM_MASK) ? 0 : 1;
#endif
+ devdisr5_info.ocram_present = (reg & DISR5_OCRAM_MASK) ? 0 : 1;
devdisr5_info.is_populated = true;
return (const devdisr5_info_t *) &devdisr5_info;
diff --git a/drivers/nxp/ddr/nxp-ddr/ddr.mk b/drivers/nxp/ddr/nxp-ddr/ddr.mk
index 6bdd947..f827a1b 100644
--- a/drivers/nxp/ddr/nxp-ddr/ddr.mk
+++ b/drivers/nxp/ddr/nxp-ddr/ddr.mk
@@ -1,5 +1,5 @@
#
-# Copyright 2021 NXP
+# Copyright 2021-2022 NXP
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -19,6 +19,10 @@
$(eval $(call add_define,ERRATA_DDR_A050450))
endif
+ifeq (${ERRATA_DDR_A050958}, 1)
+$(eval $(call add_define,ERRATA_DDR_A050958))
+endif
+
endif
ifeq ($(PLAT_DDR_PHY), PHY_GEN1)
diff --git a/drivers/nxp/ddr/nxp-ddr/dimm.c b/drivers/nxp/ddr/nxp-ddr/dimm.c
index 16efcba..a82db6c 100644
--- a/drivers/nxp/ddr/nxp-ddr/dimm.c
+++ b/drivers/nxp/ddr/nxp-ddr/dimm.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2021 NXP
+ * Copyright 2021-2022 NXP
*
* SPDX-License-Identifier: BSD-3-Clause
*
@@ -194,7 +194,7 @@
case DDR4_SPD_MINI_RDIMM:
case DDR4_SPD_72B_SO_RDIMM:
pdimm->rdimm = 1;
- pdimm->rc = spd->mod_section.registered.ref_raw_card & 0x8f;
+ pdimm->rc = spd->mod_section.registered.ref_raw_card & 0x9f;
if ((spd->mod_section.registered.reg_map & 0x1) != 0) {
pdimm->mirrored_dimm = 1;
}
@@ -223,7 +223,7 @@
case DDR4_SPD_72B_SO_UDIMM:
case DDR4_SPD_16B_SO_DIMM:
case DDR4_SPD_32B_SO_DIMM:
- pdimm->rc = spd->mod_section.unbuffered.ref_raw_card & 0x8f;
+ pdimm->rc = spd->mod_section.unbuffered.ref_raw_card & 0x9f;
if ((spd->mod_section.unbuffered.addr_mapping & 0x1) != 0) {
pdimm->mirrored_dimm = 1;
}
diff --git a/drivers/nxp/ddr/phy-gen2/phy.c b/drivers/nxp/ddr/phy-gen2/phy.c
index 9c84b00..7dbe3a3 100644
--- a/drivers/nxp/ddr/phy-gen2/phy.c
+++ b/drivers/nxp/ddr/phy-gen2/phy.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2021 NXP
+ * Copyright 2021-2022 NXP
* SPDX-License-Identifier: BSD-3-Clause
*
*/
@@ -1673,6 +1673,10 @@
int sel_analog_vref = 1;
uint32_t addr;
+#ifdef ERRATA_DDR_A050958
+ gain_curr_adj_defval = 0x1f;
+#endif
+
dq_dqs_rcv_cntrl = gain_curr_adj_defval << csr_gain_curr_adj_lsb |
major_mode_dbyte << csr_major_mode_dbyte_lsb |
dfe_ctrl_defval << csr_dfe_ctrl_lsb |
diff --git a/include/arch/aarch32/el3_common_macros.S b/include/arch/aarch32/el3_common_macros.S
index ad2a039..8b6765a 100644
--- a/include/arch/aarch32/el3_common_macros.S
+++ b/include/arch/aarch32/el3_common_macros.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -398,6 +398,12 @@
ldr r1, =__RW_END__
sub r1, r1, r0
bl inv_dcache_range
+#if defined(IMAGE_BL2) && SEPARATE_BL2_NOLOAD_REGION
+ ldr r0, =__BL2_NOLOAD_START__
+ ldr r1, =__BL2_NOLOAD_END__
+ sub r1, r1, r0
+ bl inv_dcache_range
+#endif
#endif
/*
diff --git a/include/arch/aarch64/el3_common_macros.S b/include/arch/aarch64/el3_common_macros.S
index d47244e..de2b931 100644
--- a/include/arch/aarch64/el3_common_macros.S
+++ b/include/arch/aarch64/el3_common_macros.S
@@ -469,6 +469,14 @@
sub x1, x1, x0
bl inv_dcache_range
#endif
+#if defined(IMAGE_BL2) && SEPARATE_BL2_NOLOAD_REGION
+ adrp x0, __BL2_NOLOAD_START__
+ add x0, x0, :lo12:__BL2_NOLOAD_START__
+ adrp x1, __BL2_NOLOAD_END__
+ add x1, x1, :lo12:__BL2_NOLOAD_END__
+ sub x1, x1, x0
+ bl inv_dcache_range
+#endif
#endif
adrp x0, __BSS_START__
add x0, x0, :lo12:__BSS_START__
diff --git a/include/drivers/nxp/crypto/caam/caam.h b/include/drivers/nxp/crypto/caam/caam.h
index 4984b54..6cc1f3d 100644
--- a/include/drivers/nxp/crypto/caam/caam.h
+++ b/include/drivers/nxp/crypto/caam/caam.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2017-2021 NXP
+ * Copyright 2017-2022 NXP
*
* SPDX-License-Identifier: BSD-3-Clause
*
@@ -15,7 +15,7 @@
/* Job ring 3 is reserved for usage by sec firmware */
#define DEFAULT_JR 3
-#if defined(CONFIG_CHASSIS_3_2) || defined(CONFIG_CHASSIS_2)
+#if defined(CONFIG_CHASSIS_3_2) || defined(CONFIG_CHASSIS_3) || defined(CONFIG_CHASSIS_2)
#define CAAM_JR0_OFFSET 0x10000
#define CAAM_JR1_OFFSET 0x20000
#define CAAM_JR2_OFFSET 0x30000
diff --git a/include/drivers/nxp/dcfg/dcfg.h b/include/drivers/nxp/dcfg/dcfg.h
index 524450a..cf29b12 100644
--- a/include/drivers/nxp/dcfg/dcfg.h
+++ b/include/drivers/nxp/dcfg/dcfg.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2018-2021 NXP
+ * Copyright 2018-2022 NXP
*
* SPDX-License-Identifier: BSD-3-Clause
*
@@ -12,7 +12,7 @@
#if defined(CONFIG_CHASSIS_2)
#include <dcfg_lsch2.h>
-#elif defined(CONFIG_CHASSIS_3_2)
+#elif defined(CONFIG_CHASSIS_3_2) || defined(CONFIG_CHASSIS_3)
#include <dcfg_lsch3.h>
#endif
diff --git a/include/drivers/nxp/gic/gicv3/plat_gic.h b/include/drivers/nxp/gic/gicv3/plat_gic.h
index f4e12de..0c0d0fc 100644
--- a/include/drivers/nxp/gic/gicv3/plat_gic.h
+++ b/include/drivers/nxp/gic/gicv3/plat_gic.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2021 NXP
+ * Copyright 2021-2022 NXP
*
* SPDX-License-Identifier: BSD-3-Clause
*
@@ -21,8 +21,12 @@
#define GICD_CTLR_OFFSET 0x0
#define GICD_CLR_SPI_SR 0x58
#define GICD_IGROUPR_2 0x88
+#define GICD_ISENABLER_1 0x104
+#define GICD_ICENABLER_1 0x184
#define GICD_ISENABLER_2 0x108
#define GICD_ICENABLER_2 0x188
+#define GICD_ISENABLER_3 0x10c
+#define GICD_ICENABLER_3 0x18c
#define GICD_ICPENDR_2 0x288
#define GICD_ICACTIVER_2 0x388
#define GICD_IPRIORITYR_22 0x458
@@ -69,6 +73,9 @@
#define GIC_IRM_SPI89 0x80000000
#define GICD_IROUTER_VALUE 0x100
+#define GICD_ISENABLER_1_VALUE 0x10000000
+#define GICD_ISENABLER_2_VALUE 0x100
+#define GICD_ISENABLER_3_VALUE 0x20100
#define GICR_WAKER_SLEEP_BIT 0x2
#define GICR_WAKER_ASLEEP (1 << 2 | 1 << 1)
diff --git a/make_helpers/defaults.mk b/make_helpers/defaults.mk
index b39dcf4..910ffdf 100644
--- a/make_helpers/defaults.mk
+++ b/make_helpers/defaults.mk
@@ -250,6 +250,10 @@
# separate memory region, which may be discontiguous from the rest of BL31.
SEPARATE_NOBITS_REGION := 0
+# Put BL2 NOLOAD sections (.bss, stacks, page tables) in a separate memory
+# region, platform Makefile is free to override this value.
+SEPARATE_BL2_NOLOAD_REGION := 0
+
# If the BL31 image initialisation code is recalimed after use for the secondary
# cores stack
RECLAIM_INIT_CODE := 0
diff --git a/plat/nxp/common/include/default/ch_3/soc_default_base_addr.h b/plat/nxp/common/include/default/ch_3/soc_default_base_addr.h
index e8a7645..8d64f04 100644
--- a/plat/nxp/common/include/default/ch_3/soc_default_base_addr.h
+++ b/plat/nxp/common/include/default/ch_3/soc_default_base_addr.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2021 NXP
+ * Copyright 2021-2022 NXP
*
* SPDX-License-Identifier: BSD-3-Clause
*
@@ -15,12 +15,13 @@
#define NXP_DCSR_ADDR 0x700000000
#define NXP_DCSR_SIZE 0x40000000
-/* Flex-SPI controller address */
-#define NXP_FLEXSPI_ADDR 0x020C0000
-/* Flex-SPI Flash Start address */
-#define NXP_FLEXSPI_FLASH_ADDR 0x20000000
+/* Quad SPI Region #1 base address */
+#define NXP_QSPI_FLASH_ADDR 0x20000000
-/* MMU 500 soc.c*/
+/* IFC Region #1 base address */
+#define NXP_NOR_FLASH_ADDR 0x30000000
+
+/* MMU 500 */
#define NXP_SMMU_ADDR 0x05000000
#define NXP_SNVS_ADDR 0x01E90000
@@ -34,8 +35,12 @@
#define NXP_I2C_ADDR 0x02000000
#define NXP_ESDHC_ADDR 0x02140000
#define NXP_ESDHC2_ADDR 0x02150000
-#define NXP_UART_ADDR 0x021C0000
-#define NXP_UART1_ADDR 0x021D0000
+#ifndef NXP_UART_ADDR
+#define NXP_UART_ADDR 0x021C0500
+#endif
+#ifndef NXP_UART1_ADDR
+#define NXP_UART1_ADDR 0x021C0600
+#endif
#define NXP_GPIO1_ADDR 0x02300000
#define NXP_GPIO2_ADDR 0x02310000
@@ -50,8 +55,8 @@
#define NXP_TIMER_STATUS_ADDR 0x023F0000
#define NXP_GICD_ADDR 0x06000000
-#define NXP_GICR_ADDR 0x06200000
-#define NXP_GICR_SGI_ADDR 0x06210000
+#define NXP_GICR_ADDR 0x06100000
+#define NXP_GICR_SGI_ADDR 0x06110000
#define NXP_CAAM_ADDR 0x08000000
@@ -61,4 +66,35 @@
#define NXP_RESET_ADDR 0x01E60000
#define NXP_SEC_REGFILE_ADDR 0x01E88000
-#endif /* SOC_DEFAULT_BASE_ADDR_H */
+
+#define NXP_RST_ADDR 0x01E88000
+
+/* DDR memory Map */
+#define NXP_DDR_ADDR 0x01080000
+#define NXP_DDR2_ADDR 0x01090000
+#define NXP_DDR3_ADDR 0x08210000
+
+/* QuadSPI base address */
+#define NXP_QSPI_ADDR 0x020C0000
+/* IFC base address */
+#define NXP_IFC_ADDR 0x02240000
+
+/* CCI400 base address */
+#define NXP_CCI_ADDR 0x04090000
+
+/* Global Generic Reference Timer base address */
+#define NXP_TIMER_ADDR 0x023E0000
+
+/* OCRAM TZPC base address */
+#define NXP_OCRAM_TZPC_ADDR 0x02200000
+
+#define NXP_EPU_ADDR 0x700060000
+
+#define NXP_CCN_ADDR 0x04000000
+#define NXP_CCN_HNI_ADDR 0x04080000
+#define NXP_CCN_HN_F_0_ADDR 0x04200000
+#define NXP_CCN_HN_F_1_ADDR 0x04210000
+
+#define TPMWAKEMR0_ADDR 0x700123c50
+
+#endif /* SOC_DEFAULT_BASE_ADDR_H */
diff --git a/plat/nxp/common/include/default/ch_3/soc_default_helper_macros.h b/plat/nxp/common/include/default/ch_3/soc_default_helper_macros.h
new file mode 100644
index 0000000..8e68367
--- /dev/null
+++ b/plat/nxp/common/include/default/ch_3/soc_default_helper_macros.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef SOC_DEFAULT_HELPER_MACROS_H
+#define SOC_DEFAULT_HELPER_MACROS_H
+
+#ifdef NXP_OCRAM_TZPC_ADDR
+#define TZPC_BLOCK_SIZE 0x1000
+#endif
+
+/* Reset block register offsets */
+#ifdef NXP_RESET_ADDR
+
+/* Register Offset */
+#define RST_RSTCR_OFFSET 0x0
+#define RST_RSTRQMR1_OFFSET 0x10
+#define RST_RSTRQSR1_OFFSET 0x18
+#define BRR_OFFSET 0x60
+
+/* helper macros */
+#define RSTRQMR_RPTOE_MASK (1 << 19)
+#endif /* NXP_RESET_ADDR */
+
+#define PCIeRC_RN_I_NODE_ID_OFFSET 0x8
+#define PoS_CONTROL_REG_OFFSET 0x0
+#define POS_EARLY_WR_COMP_EN 0x20
+#define HNI_POS_EN 0x01
+#define POS_TERMINATE_BARRIERS 0x10
+#define SERIALIZE_DEV_nGnRnE_WRITES 0x200
+#define ENABLE_ERR_SIGNAL_TO_MN 0x4
+#define ENABLE_RESERVE_BIT53 0x400
+#define ENABLE_WUO 0x10
+
+#define PORT_S0_CTRL_REG_RNI 0x010
+#define PORT_S1_CTRL_REG_RNI 0x110
+#define PORT_S2_CTRL_REG_RNI 0x210
+#define ENABLE_FORCE_RD_QUO 0x20
+#define QOS_SETTING 0x00FF000C
+
+/* epu register offsets and values */
+#define EPU_EPGCR_OFFSET 0x0
+#define EPU_EPIMCR10_OFFSET 0x128
+#define EPU_EPCTR10_OFFSET 0xa28
+#define EPU_EPCCR10_OFFSET 0x828
+#ifndef EPU_EPCCR10_VAL
+#define EPU_EPCCR10_VAL 0xb2800000
+#endif
+#define EPU_EPIMCR10_VAL 0xba000000
+#define EPU_EPCTR10_VAL 0x0
+#define EPU_EPGCR_VAL (1 << 31)
+
+#ifdef NXP_CCN_ADDR
+#define NXP_CCN_HN_F_1_ADDR 0x04210000
+
+#define CCN_HN_F_SAM_NODEID_MASK 0x7f
+#define CCN_HN_F_SNP_DMN_CTL_OFFSET 0x200
+#define CCN_HN_F_SNP_DMN_CTL_SET_OFFSET 0x210
+#define CCN_HN_F_SNP_DMN_CTL_CLR_OFFSET 0x220
+#define CCN_HN_F_SNP_DMN_CTL_MASK 0x80a00
+#define CCN_HNF_NODE_COUNT 8
+#define CCN_HNF_OFFSET 0x10000
+
+#define SA_AUX_CTRL_REG_OFFSET 0x500
+#define NUM_HNI_NODE 2
+#define CCN_HNI_MEMORY_MAP_SIZE 0x10000
+
+#define PCIeRC_RN_I_NODE_ID_OFFSET 0x8
+#define PoS_CONTROL_REG_OFFSET 0x0
+#define POS_EARLY_WR_COMP_EN 0x20
+#define HNI_POS_EN 0x01
+#define POS_TERMINATE_BARRIERS 0x10
+#define SERIALIZE_DEV_nGnRnE_WRITES 0x200
+#define ENABLE_ERR_SIGNAL_TO_MN 0x4
+#define ENABLE_RESERVE_BIT53 0x400
+#define ENABLE_WUO 0x10
+#endif
+
+/* reset register bit */
+#define RSTRQMR_RPTOE_MASK (1 << 19)
+
+/* secmon register offsets and bitfields */
+#define SECMON_HPCOMR_OFFSET 0x4
+#define SECMON_HPCOMR_NPSWAEN 0x80000000
+
+/* Secure-Register-File register offsets and bit masks */
+#ifdef NXP_RST_ADDR
+/* Register Offset */
+#define CORE_HOLD_OFFSET 0x140
+#endif
+
+#define DCFG_SBEESR2_ADDR 0x00100534
+#define DCFG_MBEESR2_ADDR 0x00100544
+/* SBEESR and MBEESR bit mask */
+#define OCRAM_EESR_MASK 0x00000008
+
+#endif /* SOC_DEFAULT_HELPER_MACROS_H */
diff --git a/plat/nxp/common/plat_make_helper/soc_common_def.mk b/plat/nxp/common/plat_make_helper/soc_common_def.mk
index 22cd39a..52f2867 100644
--- a/plat/nxp/common/plat_make_helper/soc_common_def.mk
+++ b/plat/nxp/common/plat_make_helper/soc_common_def.mk
@@ -1,4 +1,4 @@
-# Copyright 2020-2021 NXP
+# Copyright 2020-2022 NXP
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -11,14 +11,12 @@
$(eval $(call add_define_val,CACHE_WRITEBACK_GRANULE,$(CACHE_WRITEBACK_GRANULE)))
endif
-ifeq (${INTERCONNECT}, "CCI400")
+ifneq (${INTERCONNECT},)
$(eval $(call add_define,NXP_HAS_${INTERCONNECT}))
+ifeq (${INTERCONNECT}, CCI400)
ICNNCT_ID := 0x420
$(eval $(call add_define,ICNNCT_ID))
endif
-
-ifeq (${INTERCONNECT}, "CCN508")
-$(eval $(call add_define,NXP_HAS_CCN508))
endif
ifneq (${CHASSIS},)
diff --git a/plat/nxp/common/setup/ls_bl2_el3_setup.c b/plat/nxp/common/setup/ls_bl2_el3_setup.c
index 5b5144d..a4cbaef 100644
--- a/plat/nxp/common/setup/ls_bl2_el3_setup.c
+++ b/plat/nxp/common/setup/ls_bl2_el3_setup.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2018-2020 NXP
+ * Copyright 2018-2022 NXP
*
* SPDX-License-Identifier: BSD-3-Clause
*
@@ -182,7 +182,7 @@
unsigned int flags = 0U;
/* Initialise the IO layer and register platform IO devices */
ls_setup_page_tables(
-#if SEPARATE_RW_AND_NOLOAD
+#if SEPARATE_BL2_NOLOAD_REGION
BL2_START,
BL2_LIMIT - BL2_START,
#else
@@ -289,8 +289,9 @@
if ((dram_regions_info.region[0].addr == 0)
&& (dram_regions_info.total_dram_size > 0)) {
populate_dram_regions_info();
-
+#ifdef PLAT_XLAT_TABLES_DYNAMIC
mmap_add_ddr_region_dynamically();
+#endif
}
/* setup the memory region access permissions */
diff --git a/plat/nxp/common/soc_errata/errata.c b/plat/nxp/common/soc_errata/errata.c
index a117c91..55ef604 100644
--- a/plat/nxp/common/soc_errata/errata.c
+++ b/plat/nxp/common/soc_errata/errata.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2021 NXP
+ * Copyright 2021-2022 NXP
*
* SPDX-License-Identifier: BSD-3-Clause
*
@@ -19,6 +19,15 @@
INFO("SoC workaround for Errata A008850 Early-Phase was applied\n");
erratum_a008850_early();
#endif
+#if ERRATA_SOC_A009660
+ INFO("SoC workaround for Errata A009660 was applied\n");
+ erratum_a009660();
+#endif
+#if ERRATA_SOC_A010539
+ INFO("SoC workaround for Errata A010539 was applied\n");
+ erratum_a010539();
+#endif
+
/*
* The following DDR Erratas workaround are implemented in DDR driver,
* but print information here.
@@ -29,4 +38,22 @@
#if ERRATA_DDR_A050450
INFO("SoC workaround for DDR Errata A050450 was applied\n");
#endif
+#if ERRATA_DDR_A050958
+ INFO("SoC workaround for DDR Errata A050958 was applied\n");
+#endif
+#if ERRATA_DDR_A008511
+ INFO("SoC workaround for DDR Errata A008511 was applied\n");
+#endif
+#if ERRATA_DDR_A009803
+ INFO("SoC workaround for DDR Errata A009803 was applied\n");
+#endif
+#if ERRATA_DDR_A009942
+ INFO("SoC workaround for DDR Errata A009942 was applied\n");
+#endif
+#if ERRATA_DDR_A010165
+ INFO("SoC workaround for DDR Errata A010165 was applied\n");
+#endif
+#if ERRATA_DDR_A009663
+ INFO("SoC workaround for DDR Errata A009663 was applied\n");
+#endif
}
diff --git a/plat/nxp/common/soc_errata/errata.mk b/plat/nxp/common/soc_errata/errata.mk
index d2511bb..3deef3d 100644
--- a/plat/nxp/common/soc_errata/errata.mk
+++ b/plat/nxp/common/soc_errata/errata.mk
@@ -1,5 +1,5 @@
#
-# Copyright 2021 NXP
+# Copyright 2021-2022 NXP
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -9,7 +9,9 @@
ERRATA := \
ERRATA_SOC_A050426 \
- ERRATA_SOC_A008850
+ ERRATA_SOC_A008850 \
+ ERRATA_SOC_A009660 \
+ ERRATA_SOC_A010539
define enable_errata
$(1) ?= 0
diff --git a/plat/nxp/common/soc_errata/errata_a009660.c b/plat/nxp/common/soc_errata/errata_a009660.c
new file mode 100644
index 0000000..d31a4d7
--- /dev/null
+++ b/plat/nxp/common/soc_errata/errata_a009660.c
@@ -0,0 +1,14 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <mmio.h>
+#include <soc_default_base_addr.h>
+
+void erratum_a009660(void)
+{
+ mmio_write_32(NXP_SCFG_ADDR + 0x20c, 0x63b20042);
+}
diff --git a/plat/nxp/common/soc_errata/errata_a010539.c b/plat/nxp/common/soc_errata/errata_a010539.c
new file mode 100644
index 0000000..3dcbdc8
--- /dev/null
+++ b/plat/nxp/common/soc_errata/errata_a010539.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <mmio.h>
+
+#include <plat_common.h>
+
+void erratum_a010539(void)
+{
+ if (get_boot_dev() == BOOT_DEVICE_QSPI) {
+ unsigned int *porsr1 = (void *)(NXP_DCFG_ADDR +
+ DCFG_PORSR1_OFFSET);
+ uint32_t val;
+
+ val = (gur_in32(porsr1) & ~PORSR1_RCW_MASK);
+ mmio_write_32((uint32_t)(NXP_DCSR_DCFG_ADDR +
+ DCFG_DCSR_PORCR1_OFFSET), htobe32(val));
+ /* Erratum need to set '1' to all bits for reserved SCFG register 0x1a8 */
+ mmio_write_32((uint32_t)(NXP_SCFG_ADDR + 0x1a8),
+ htobe32(0xffffffff));
+ }
+}
diff --git a/plat/nxp/common/soc_errata/errata_list.h b/plat/nxp/common/soc_errata/errata_list.h
index ae95fa2..f6741e2 100644
--- a/plat/nxp/common/soc_errata/errata_list.h
+++ b/plat/nxp/common/soc_errata/errata_list.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2021 NXP
+ * Copyright 2021-2022 NXP
*
* SPDX-License-Identifier: BSD-3-Clause
*
@@ -17,4 +17,12 @@
void erratum_a008850_post(void);
#endif
+#ifdef ERRATA_SOC_A009660
+void erratum_a009660(void);
+#endif
+
+#ifdef ERRATA_SOC_A010539
+void erratum_a010539(void);
+#endif
+
#endif /* ERRATA_LIST_H */
diff --git a/plat/nxp/common/tbbr/tbbr.mk b/plat/nxp/common/tbbr/tbbr.mk
index 25852ba..7edcfbc 100644
--- a/plat/nxp/common/tbbr/tbbr.mk
+++ b/plat/nxp/common/tbbr/tbbr.mk
@@ -1,5 +1,5 @@
#
-# Copyright 2020 NXP
+# Copyright 2020-2022 NXP
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -13,6 +13,12 @@
CSF_FILE := input_blx_ch${CHASSIS}
BL2_CSF_FILE := input_bl2_ch${CHASSIS}
else
+ifeq ($(CHASSIS), 3)
+CSF_FILE := input_blx_ch${CHASSIS}
+BL2_CSF_FILE := input_bl2_ch${CHASSIS}
+PBI_CSF_FILE := input_pbi_ch${CHASSIS}
+$(eval $(call add_define, CSF_HDR_CH3))
+else
ifeq ($(CHASSIS), 3_2)
CSF_FILE := input_blx_ch3
BL2_CSF_FILE := input_bl2_ch${CHASSIS}
@@ -22,6 +28,7 @@
$(error -> CHASSIS not set!)
endif
endif
+endif
PLAT_AUTH_PATH := $(PLAT_DRIVERS_PATH)/auth
diff --git a/plat/nxp/soc-ls1088a/aarch64/ls1088a.S b/plat/nxp/soc-ls1088a/aarch64/ls1088a.S
new file mode 100644
index 0000000..0c6b7ea
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/aarch64/ls1088a.S
@@ -0,0 +1,1817 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+.section .text, "ax"
+
+#include <asm_macros.S>
+#include <lib/psci/psci.h>
+#include <nxp_timer.h>
+#include <plat_gic.h>
+
+#include "bl31_data.h"
+#include "plat_psci.h"
+#include "platform_def.h"
+
+/*
+ * the BASE address for these offsets is AUX_01_DATA in the
+ * bootcore's psci data region
+ */
+#define DEVDISR2_MASK_OFFSET 0x0 /* references AUX_01_DATA */
+#define DEVDISR5_MASK_OFFSET 0x8 /* references AUX_02_DATA */
+
+/*
+ * the BASE address for these offsets is AUX_04_DATA in the
+ * bootcore's psci data region
+ */
+#define GICD_BASE_ADDR_OFFSET 0x0 /* references AUX_04_DATA */
+#define GICC_BASE_ADDR_OFFSET 0x8 /* references AUX_05_DATA */
+
+#define IPSTPACK_RETRY_CNT 0x10000
+#define DDR_SLEEP_RETRY_CNT 0x10000
+#define CPUACTLR_EL1 S3_1_C15_C2_0
+#define DDR_SDRAM_CFG_2_FRCSR 0x80000000
+#define DDR_SDRAM_CFG_2_OFFSET 0x114
+#define DDR_TIMING_CFG_4_OFFSET 0x160
+#define DDR_CNTRL_BASE_ADDR 0x01080000
+
+#define DLL_LOCK_MASK 0x3
+#define DLL_LOCK_VALUE 0x2
+
+#define ERROR_DDR_SLEEP -1
+#define ERROR_DDR_WAKE -2
+#define ERROR_NO_QUIESCE -3
+
+#define CORE_RESTARTABLE 0
+#define CORE_NOT_RESTARTABLE 1
+
+.global soc_init_lowlevel
+.global soc_init_percpu
+
+.global _soc_core_release
+.global _soc_core_restart
+.global _soc_ck_disabled
+.global _soc_sys_reset
+.global _soc_sys_off
+
+.global _soc_core_prep_off
+.global _soc_core_entr_off
+.global _soc_core_exit_off
+
+.global _soc_core_prep_stdby
+.global _soc_core_entr_stdby
+.global _soc_core_exit_stdby
+.global _soc_core_prep_pwrdn
+.global _soc_core_entr_pwrdn
+.global _soc_core_exit_pwrdn
+.global _soc_clstr_prep_stdby
+.global _soc_clstr_exit_stdby
+.global _soc_clstr_prep_pwrdn
+.global _soc_clstr_exit_pwrdn
+.global _soc_sys_prep_stdby
+.global _soc_sys_exit_stdby
+.global _soc_sys_prep_pwrdn
+.global _soc_sys_pwrdn_wfi
+.global _soc_sys_exit_pwrdn
+
+.global _set_platform_security
+.global _soc_set_start_addr
+
+.equ TZPCDECPROT_0_SET_BASE, 0x02200804
+.equ TZPCDECPROT_1_SET_BASE, 0x02200810
+.equ TZPCDECPROT_2_SET_BASE, 0x0220081C
+
+.equ TZASC_REGION_ATTRIBUTES_0_0, 0x01100110
+
+.equ MPIDR_AFFINITY0_MASK, 0x00FF
+.equ MPIDR_AFFINITY1_MASK, 0xFF00
+.equ CPUECTLR_DISABLE_TWALK_PREFETCH, 0x4000000000
+.equ CPUECTLR_INS_PREFETCH_MASK, 0x1800000000
+.equ CPUECTLR_DAT_PREFETCH_MASK, 0x0300000000
+.equ OSDLR_EL1_DLK_LOCK, 0x1
+.equ CNTP_CTL_EL0_EN, 0x1
+.equ CNTP_CTL_EL0_IMASK, 0x2
+/* shifted value for incrementing cluster count in mpidr */
+.equ MPIDR_CLUSTER, 0x100
+
+/*
+ * This function initialize the soc,
+ * in: none
+ * out: none
+ * uses x0, x1, x2, x3, x4, x5, x6, x7, x8, x9, x10, x11
+ */
+func soc_init_lowlevel
+ /*
+ * called from C, so save the non-volatile regs
+ * save these as pairs of registers to maintain the
+ * required 16-byte alignment on the stack
+ */
+ stp x4, x5, [sp, #-16]!
+ stp x6, x7, [sp, #-16]!
+ stp x8, x9, [sp, #-16]!
+ stp x10, x11, [sp, #-16]!
+ stp x12, x13, [sp, #-16]!
+ stp x18, x30, [sp, #-16]!
+
+ /*
+ * make sure the personality has been established by releasing cores
+ * that are marked "to-be-disabled" from reset
+ */
+ bl release_disabled
+
+ /* set SCRATCHRW7 to 0x0 */
+ ldr x0, =DCFG_SCRATCHRW7_OFFSET
+ mov x1, xzr
+ bl _write_reg_dcfg
+
+ /* restore the aarch32/64 non-volatile registers */
+ ldp x18, x30, [sp], #16
+ ldp x12, x13, [sp], #16
+ ldp x10, x11, [sp], #16
+ ldp x8, x9, [sp], #16
+ ldp x6, x7, [sp], #16
+ ldp x4, x5, [sp], #16
+ ret
+endfunc soc_init_lowlevel
+
+/*
+ * void soc_init_percpu(void)
+ * this function performs any soc-specific initialization that is needed on
+ * a per-core basis
+ * in: none
+ * out: none
+ * uses x0, x1, x2, x3
+ */
+func soc_init_percpu
+ stp x4, x30, [sp, #-16]!
+
+ bl plat_my_core_mask
+ mov x2, x0
+
+ /* x2 = core mask */
+
+ /* see if this core is marked for prefetch disable */
+ mov x0, #PREFETCH_DIS_OFFSET
+ bl _get_global_data
+ tst x0, x2
+ b.eq 1f
+ bl _disable_ldstr_pfetch_A53
+1:
+ mov x0, #NXP_PMU_ADDR
+ bl enable_timer_base_to_cluster
+ ldp x4, x30, [sp], #16
+ ret
+endfunc soc_init_percpu
+
+/*
+ * this function sets the security mechanisms in the SoC to implement the
+ * Platform Security Policy
+ */
+func _set_platform_security
+ mov x3, x30
+
+#if (!SUPPRESS_TZC)
+ /* initialize the tzpc */
+ bl init_tzpc
+#endif
+
+#if (!SUPPRESS_SEC)
+ /* initialize secmon */
+ bl initSecMon
+#endif
+ mov x30, x3
+ ret
+endfunc _set_platform_security
+
+/*
+ * this function writes a 64-bit address to bootlocptrh/l
+ * in: x0, 64-bit address to write to BOOTLOCPTRL/H
+ * out: none
+ * uses x0, x1, x2
+ */
+func _soc_set_start_addr
+ /* get the 64-bit base address of the dcfg block */
+ ldr x2, =NXP_DCFG_ADDR
+
+ /* write the 32-bit BOOTLOCPTRL register */
+ mov x1, x0
+ str w1, [x2, #DCFG_BOOTLOCPTRL_OFFSET]
+
+ /* write the 32-bit BOOTLOCPTRH register */
+ lsr x1, x0, #32
+ str w1, [x2, #DCFG_BOOTLOCPTRH_OFFSET]
+ ret
+endfunc _soc_set_start_addr
+
+/*
+ * part of CPU_ON
+ * this function releases a secondary core from reset
+ * in: x0 = core_mask_lsb
+ * out: none
+ * uses: x0, x1, x2, x3
+ */
+_soc_core_release:
+ mov x3, x30
+
+ /* x0 = core mask */
+
+ ldr x1, =NXP_SEC_REGFILE_ADDR
+ /*
+ * write to CORE_HOLD to tell the bootrom that we want this core
+ * to run
+ */
+ str w0, [x1, #CORE_HOLD_OFFSET]
+
+ /* x0 = core mask */
+
+ /* read-modify-write BRRL to release core */
+ mov x1, #NXP_RESET_ADDR
+ ldr w2, [x1, #BRR_OFFSET]
+ orr w2, w2, w0
+ str w2, [x1, #BRR_OFFSET]
+ dsb sy
+ isb
+
+ /* send event */
+ sev
+ isb
+
+ mov x30, x3
+ ret
+
+/*
+ * this function determines if a core is disabled via COREDISABLEDSR
+ * in: w0 = core_mask_lsb
+ * out: w0 = 0, core not disabled
+ * w0 != 0, core disabled
+ * uses x0, x1
+ */
+_soc_ck_disabled:
+ /* get base addr of dcfg block */
+ ldr x1, =NXP_DCFG_ADDR
+
+ /* read COREDISABLEDSR */
+ ldr w1, [x1, #DCFG_COREDISABLEDSR_OFFSET]
+
+ /* test core bit */
+ and w0, w1, w0
+
+ ret
+
+/*
+ * part of CPU_ON
+ * this function restarts a core shutdown via _soc_core_entr_off
+ * in: x0 = core mask lsb (of the target cpu)
+ * out: x0 == 0, on success
+ * x0 != 0, on failure
+ * uses x0, x1, x2, x3, x4, x5, x6
+ */
+_soc_core_restart:
+ mov x6, x30
+ mov x4, x0
+
+ /* x4 = core mask lsb */
+
+ /* pgm GICD_CTLR - enable secure grp0 */
+ mov x5, #NXP_GICD_ADDR
+ ldr w2, [x5, #GICD_CTLR_OFFSET]
+ orr w2, w2, #GICD_CTLR_EN_GRP_0
+ str w2, [x5, #GICD_CTLR_OFFSET]
+ dsb sy
+ isb
+ /* poll on RWP til write completes */
+4:
+ ldr w2, [x5, #GICD_CTLR_OFFSET]
+ tst w2, #GICD_CTLR_RWP
+ b.ne 4b
+
+ /*
+ * x4 = core mask lsb
+ * x5 = gicd base addr
+ */
+
+ mov x0, x4
+ bl get_mpidr_value
+
+ /*
+ * x0 = mpidr of target core
+ * x4 = core mask lsb of target core
+ * x5 = gicd base addr
+ */
+
+ /* generate target list bit */
+ and x1, x0, #MPIDR_AFFINITY0_MASK
+ mov x2, #1
+ lsl x2, x2, x1
+ /* get the affinity1 field */
+ and x1, x0, #MPIDR_AFFINITY1_MASK
+ lsl x1, x1, #8
+ orr x2, x2, x1
+ /* insert the INTID for SGI15 */
+ orr x2, x2, #ICC_SGI0R_EL1_INTID
+ /* fire the SGI */
+ msr ICC_SGI0R_EL1, x2
+ dsb sy
+ isb
+
+ /* load '0' on success */
+ mov x0, xzr
+
+ mov x30, x6
+ ret
+
+/*
+ * part of CPU_OFF
+ * this function programs SoC & GIC registers in preparation for shutting down
+ * the core
+ * in: x0 = core mask lsb
+ * out: none
+ * uses x0, x1, x2, x3, x4, x5, x6, x7
+ */
+_soc_core_prep_off:
+ mov x8, x30
+ mov x7, x0
+
+ /* x7 = core mask lsb */
+
+ mrs x1, CPUECTLR_EL1
+ /* set smp and disable L2 snoops in cpuectlr */
+ orr x1, x1, #CPUECTLR_SMPEN_EN
+ orr x1, x1, #CPUECTLR_DISABLE_TWALK_PREFETCH
+ bic x1, x1, #CPUECTLR_INS_PREFETCH_MASK
+ bic x1, x1, #CPUECTLR_DAT_PREFETCH_MASK
+ /* set retention control in cpuectlr */
+ bic x1, x1, #CPUECTLR_TIMER_MASK
+ orr x1, x1, #CPUECTLR_TIMER_8TICKS
+ msr CPUECTLR_EL1, x1
+
+ /* get redistributor rd base addr for this core */
+ mov x0, x7
+ bl get_gic_rd_base
+ mov x6, x0
+
+ /* get redistributor sgi base addr for this core */
+ mov x0, x7
+ bl get_gic_sgi_base
+ mov x5, x0
+
+ /* x5 = gicr sgi base addr
+ * x6 = gicr rd base addr
+ * x7 = core mask lsb
+ */
+
+ /* disable SGI 15 at redistributor - GICR_ICENABLER0 */
+ mov w3, #GICR_ICENABLER0_SGI15
+ str w3, [x5, #GICR_ICENABLER0_OFFSET]
+2:
+ /* poll on rwp bit in GICR_CTLR */
+ ldr w4, [x6, #GICR_CTLR_OFFSET]
+ tst w4, #GICR_CTLR_RWP
+ b.ne 2b
+
+ /* disable GRP1 interrupts at cpu interface */
+ msr ICC_IGRPEN1_EL3, xzr
+
+ /* disable GRP0 ints at cpu interface */
+ msr ICC_IGRPEN0_EL1, xzr
+
+ /* program the redistributor - poll on GICR_CTLR.RWP as needed */
+
+ /* define SGI 15 as Grp0 - GICR_IGROUPR0 */
+ ldr w4, [x5, #GICR_IGROUPR0_OFFSET]
+ bic w4, w4, #GICR_IGROUPR0_SGI15
+ str w4, [x5, #GICR_IGROUPR0_OFFSET]
+
+ /* define SGI 15 as Grp0 - GICR_IGRPMODR0 */
+ ldr w3, [x5, #GICR_IGRPMODR0_OFFSET]
+ bic w3, w3, #GICR_IGRPMODR0_SGI15
+ str w3, [x5, #GICR_IGRPMODR0_OFFSET]
+
+ /* set priority of SGI 15 to highest (0x0) - GICR_IPRIORITYR3 */
+ ldr w4, [x5, #GICR_IPRIORITYR3_OFFSET]
+ bic w4, w4, #GICR_IPRIORITYR3_SGI15_MASK
+ str w4, [x5, #GICR_IPRIORITYR3_OFFSET]
+
+ /* enable SGI 15 at redistributor - GICR_ISENABLER0 */
+ mov w3, #GICR_ISENABLER0_SGI15
+ str w3, [x5, #GICR_ISENABLER0_OFFSET]
+ dsb sy
+ isb
+3:
+ /* poll on rwp bit in GICR_CTLR */
+ ldr w4, [x6, #GICR_CTLR_OFFSET]
+ tst w4, #GICR_CTLR_RWP
+ b.ne 3b
+
+ /* quiesce the debug interfaces */
+ mrs x3, osdlr_el1
+ orr x3, x3, #OSDLR_EL1_DLK_LOCK
+ msr osdlr_el1, x3
+ isb
+
+ /* enable grp0 ints */
+ mov x3, #ICC_IGRPEN0_EL1_EN
+ msr ICC_IGRPEN0_EL1, x3
+
+ /*
+ * x5 = gicr sgi base addr
+ * x6 = gicr rd base addr
+ * x7 = core mask lsb
+ */
+
+ /* clear any pending interrupts */
+ mvn w1, wzr
+ str w1, [x5, #GICR_ICPENDR0_OFFSET]
+
+ /* make sure system counter is enabled */
+ ldr x3, =NXP_TIMER_ADDR
+ ldr w0, [x3, #SYS_COUNTER_CNTCR_OFFSET]
+ tst w0, #SYS_COUNTER_CNTCR_EN
+ b.ne 4f
+ orr w0, w0, #SYS_COUNTER_CNTCR_EN
+ str w0, [x3, #SYS_COUNTER_CNTCR_OFFSET]
+4:
+ /* enable the core timer and mask timer interrupt */
+ mov x1, #CNTP_CTL_EL0_EN
+ orr x1, x1, #CNTP_CTL_EL0_IMASK
+ msr cntp_ctl_el0, x1
+
+ mov x30, x8
+ ret
+
+/*
+ * part of CPU_OFF
+ * this function performs the final steps to shutdown the core
+ * in: x0 = core mask lsb
+ * out: none
+ * uses x0, x1, x2, x3, x4, x5
+ */
+_soc_core_entr_off:
+ mov x5, x30
+ mov x4, x0
+
+ /* x4 = core mask */
+1:
+ /* enter low-power state by executing wfi */
+ wfi
+
+ /* see if SGI15 woke us up */
+ mrs x2, ICC_IAR0_EL1
+ mov x3, #ICC_IAR0_EL1_SGI15
+ cmp x2, x3
+ b.ne 2f
+
+ /* deactivate the int */
+ msr ICC_EOIR0_EL1, x2
+
+ /* x4 = core mask */
+2:
+ /* check if core has been turned on */
+ mov x0, x4
+ bl _getCoreState
+
+ /* x0 = core state */
+
+ cmp x0, #CORE_WAKEUP
+ b.ne 1b
+
+ /* if we get here, then we have exited the wfi */
+
+ mov x30, x5
+ ret
+
+/*
+ * part of CPU_OFF
+ * this function starts the process of starting a core back up
+ * in: x0 = core mask lsb
+ * out: none
+ * uses x0, x1, x2, x3, x4, x5, x6
+ */
+_soc_core_exit_off:
+ mov x6, x30
+ mov x5, x0
+
+ /* disable forwarding of GRP0 ints at cpu interface */
+ msr ICC_IGRPEN0_EL1, xzr
+
+ /* get redistributor sgi base addr for this core */
+ mov x0, x5
+ bl get_gic_sgi_base
+ mov x4, x0
+
+ /*
+ * x4 = gicr sgi base addr
+ * x5 = core mask
+ */
+
+ /* disable SGI 15 at redistributor - GICR_ICENABLER0 */
+ mov w1, #GICR_ICENABLER0_SGI15
+ str w1, [x4, #GICR_ICENABLER0_OFFSET]
+
+ /* get redistributor rd base addr for this core */
+ mov x0, x5
+ bl get_gic_rd_base
+ mov x4, x0
+
+ /* x4 = gicr rd base addr */
+2:
+ /* poll on rwp bit in GICR_CTLR */
+ ldr w2, [x4, #GICR_CTLR_OFFSET]
+ tst w2, #GICR_CTLR_RWP
+ b.ne 2b
+
+ /* x4 = gicr rd base addr */
+
+ /* unlock the debug interfaces */
+ mrs x3, osdlr_el1
+ bic x3, x3, #OSDLR_EL1_DLK_LOCK
+ msr osdlr_el1, x3
+ isb
+
+ dsb sy
+ isb
+ mov x30, x6
+ ret
+
+/*
+ * this function requests a reset of the entire SOC
+ * in: none
+ * out: none
+ * uses: x0, x1, x2, x3, x4, x5, x6
+ */
+_soc_sys_reset:
+ mov x3, x30
+
+ /* make sure the mask is cleared in the reset request mask register */
+ mov x0, #RST_RSTRQMR1_OFFSET
+ mov w1, wzr
+ bl _write_reg_reset
+
+ /* set the reset request */
+ mov x4, #RST_RSTCR_OFFSET
+ mov x0, x4
+ mov w1, #RSTCR_RESET_REQ
+ bl _write_reg_reset
+
+ /* x4 = RST_RSTCR_OFFSET */
+
+ /*
+ * just in case this address range is mapped as cacheable,
+ * flush the write out of the dcaches
+ */
+ mov x2, #NXP_RESET_ADDR
+ add x2, x2, x4
+ dc cvac, x2
+ dsb st
+ isb
+
+ /* this function does not return */
+ b .
+
+/*
+ * this function turns off the SoC
+ * Note: this function is not intended to return, and the only allowable
+ * recovery is POR
+ * in: none
+ * out: none
+ * uses x0, x1, x2, x3
+ */
+_soc_sys_off:
+ /*
+ * A-009810: LPM20 entry sequence might cause
+ * spurious timeout reset request
+ * workaround: MASK RESET REQ RPTOE
+ */
+ ldr x0, =NXP_RESET_ADDR
+ ldr w1, [x0, #RST_RSTRQMR1_OFFSET]
+ orr w1, w1, #RSTRQMR_RPTOE_MASK
+ str w1, [x0, #RST_RSTRQMR1_OFFSET]
+
+ /* disable SEC, QBman spi and qspi */
+ ldr x2, =NXP_DCFG_ADDR
+ ldr x0, =DCFG_DEVDISR1_OFFSET
+ ldr w1, =DCFG_DEVDISR1_SEC
+ str w1, [x2, x0]
+ ldr x0, =DCFG_DEVDISR3_OFFSET
+ ldr w1, =DCFG_DEVDISR3_QBMAIN
+ str w1, [x2, x0]
+ ldr x0, =DCFG_DEVDISR4_OFFSET
+ ldr w1, =DCFG_DEVDISR4_SPI_QSPI
+ str w1, [x2, x0]
+
+ /* set TPMWAKEMR0 */
+ ldr x0, =TPMWAKEMR0_ADDR
+ mov w1, #0x1
+ str w1, [x0]
+
+ /* disable icache, dcache, mmu @ EL1 */
+ mov x1, #SCTLR_I_C_M_MASK
+ mrs x0, sctlr_el1
+ bic x0, x0, x1
+ msr sctlr_el1, x0
+
+ /* disable L2 prefetches */
+ mrs x0, CPUECTLR_EL1
+ orr x0, x0, #CPUECTLR_SMPEN_EN
+ orr x0, x0, #CPUECTLR_TIMER_8TICKS
+ msr CPUECTLR_EL1, x0
+ dsb sy
+ isb
+
+ /* disable CCN snoop domain */
+ ldr x0, =NXP_CCI_ADDR
+ mov w1, #0x1
+ str w1, [x0]
+
+ mov x2, #DAIF_SET_MASK
+
+ mrs x1, spsr_el1
+ orr x1, x1, x2
+ msr spsr_el1, x1
+
+ mrs x1, spsr_el2
+ orr x1, x1, x2
+ msr spsr_el2, x1
+
+ bl get_pmu_idle_cluster_mask
+ mov x3, #NXP_PMU_ADDR
+
+ /* x3 = pmu base addr */
+
+ /* idle the ACP interfaces */
+ str w0, [x3, #PMU_CLAINACTSETR_OFFSET]
+
+ /* force the debug interface to be quiescent */
+ mrs x0, osdlr_el1
+ orr x0, x0, #0x1
+ msr osdlr_el1, x0
+
+ bl get_pmu_flush_cluster_mask
+ /* x3 = pmu base addr */
+ mov x3, #NXP_PMU_ADDR
+
+ /* clear flush request and status */
+ ldr x2, =PMU_CLSL2FLUSHCLRR_OFFSET
+ str w0, [x3, x2]
+
+ /* close the Skyros master port */
+ ldr x2, =PMU_CLSINACTSETR_OFFSET
+ str w0, [x3, x2]
+
+ /* request lpm20 */
+ ldr x0, =PMU_POWMGTCSR_OFFSET
+ ldr w1, =PMU_POWMGTCSR_VAL
+ str w1, [x3, x0]
+
+ /* this function does not return */
+1:
+ wfi
+ b 1b
+
+/*
+ * part of CPU_SUSPEND
+ * this function performs SoC-specific programming prior to standby
+ * in: x0 = core mask lsb
+ * out: none
+ * uses x0, x1
+ */
+_soc_core_prep_stdby:
+ /* clear CPUECTLR_EL1[2:0] */
+ mrs x1, CPUECTLR_EL1
+ bic x1, x1, #CPUECTLR_TIMER_MASK
+ msr CPUECTLR_EL1, x1
+
+ ret
+
+/*
+ * part of CPU_SUSPEND
+ * this function puts the calling core into standby state
+ * in: x0 = core mask lsb
+ * out: none
+ * uses x0
+ */
+_soc_core_entr_stdby:
+ /* X0 = core mask lsb */
+ dsb sy
+ isb
+ wfi
+
+ ret
+
+/*
+ * part of CPU_SUSPEND
+ * this function performs any SoC-specific cleanup after standby state
+ * in: x0 = core mask lsb
+ * out: none
+ * uses none
+ */
+_soc_core_exit_stdby:
+ ret
+
+/*
+ * part of CPU_SUSPEND
+ * this function performs SoC-specific programming prior to power-down
+ * in: x0 = core mask lsb
+ * out: none
+ * uses x0, x1, x2, x3
+ */
+_soc_core_prep_pwrdn:
+ /* make sure system counter is enabled */
+ ldr x3, =NXP_TIMER_ADDR
+ ldr w0, [x3, #SYS_COUNTER_CNTCR_OFFSET]
+ tst w0, #SYS_COUNTER_CNTCR_EN
+ b.ne 1f
+ orr w0, w0, #SYS_COUNTER_CNTCR_EN
+ str w0, [x3, #SYS_COUNTER_CNTCR_OFFSET]
+1:
+ /*
+ * enable dynamic retention control (CPUECTLR[2:0])
+ * set the SMPEN bit (CPUECTLR[6])
+ */
+ mrs x1, CPUECTLR_EL1
+ bic x1, x1, #CPUECTLR_RET_MASK
+ orr x1, x1, #CPUECTLR_TIMER_8TICKS
+ orr x1, x1, #CPUECTLR_SMPEN_EN
+ msr CPUECTLR_EL1, x1
+
+ isb
+ ret
+
+/*
+ * part of CPU_SUSPEND
+ * this function puts the calling core into a power-down state
+ * in: x0 = core mask lsb
+ * out: none
+ * uses x0
+ */
+_soc_core_entr_pwrdn:
+ /* X0 = core mask lsb */
+ dsb sy
+ isb
+ wfi
+
+ ret
+
+/*
+ * part of CPU_SUSPEND
+ * this function cleans up after a core exits power-down
+ * in: x0 = core mask lsb
+ * out: none
+ * uses
+ */
+_soc_core_exit_pwrdn:
+ ret
+
+/*
+ * part of CPU_SUSPEND
+ * this function performs SoC-specific programming prior to standby
+ * in: x0 = core mask lsb
+ * out: none
+ * uses x0, x1
+ */
+_soc_clstr_prep_stdby:
+ /* clear CPUECTLR_EL1[2:0] */
+ mrs x1, CPUECTLR_EL1
+ bic x1, x1, #CPUECTLR_TIMER_MASK
+ msr CPUECTLR_EL1, x1
+
+ ret
+
+/*
+ * part of CPU_SUSPEND
+ * this function performs any SoC-specific cleanup after standby state
+ * in: x0 = core mask lsb
+ * out: none
+ * uses none
+ */
+_soc_clstr_exit_stdby:
+ ret
+
+/*
+ * part of CPU_SUSPEND
+ * this function performs SoC-specific programming prior to power-down
+ * in: x0 = core mask lsb
+ * out: none
+ * uses x0, x1, x2, x3
+ */
+_soc_clstr_prep_pwrdn:
+ /* make sure system counter is enabled */
+ ldr x3, =NXP_TIMER_ADDR
+ ldr w0, [x3, #SYS_COUNTER_CNTCR_OFFSET]
+ tst w0, #SYS_COUNTER_CNTCR_EN
+ b.ne 1f
+ orr w0, w0, #SYS_COUNTER_CNTCR_EN
+ str w0, [x3, #SYS_COUNTER_CNTCR_OFFSET]
+1:
+ /*
+ * enable dynamic retention control (CPUECTLR[2:0])
+ * set the SMPEN bit (CPUECTLR[6])
+ */
+ mrs x1, CPUECTLR_EL1
+ bic x1, x1, #CPUECTLR_RET_MASK
+ orr x1, x1, #CPUECTLR_TIMER_8TICKS
+ orr x1, x1, #CPUECTLR_SMPEN_EN
+ msr CPUECTLR_EL1, x1
+
+ isb
+ ret
+
+/*
+ * part of CPU_SUSPEND
+ * this function cleans up after a core exits power-down
+ * in: x0 = core mask lsb
+ * out: none
+ * uses
+ */
+_soc_clstr_exit_pwrdn:
+ ret
+
+/*
+ * part of CPU_SUSPEND
+ * this function performs SoC-specific programming prior to standby
+ * in: x0 = core mask lsb
+ * out: none
+ * uses x0, x1
+ */
+_soc_sys_prep_stdby:
+ /* clear CPUECTLR_EL1[2:0] */
+ mrs x1, CPUECTLR_EL1
+ bic x1, x1, #CPUECTLR_TIMER_MASK
+ msr CPUECTLR_EL1, x1
+
+ ret
+
+/*
+ * part of CPU_SUSPEND
+ * this function performs any SoC-specific cleanup after standby state
+ * in: x0 = core mask lsb
+ * out: none
+ * uses none
+ */
+_soc_sys_exit_stdby:
+ ret
+
+/*
+ * part of CPU_SUSPEND
+ * this function performs SoC-specific programming prior to
+ * suspend-to-power-down
+ * in: x0 = core mask lsb
+ * out: none
+ * uses x0
+ */
+_soc_sys_prep_pwrdn:
+ /* set retention control */
+ mrs x0, CPUECTLR_EL1
+ bic x0, x0, #CPUECTLR_TIMER_MASK
+ orr x0, x0, #CPUECTLR_TIMER_8TICKS
+ orr x0, x0, #CPUECTLR_SMPEN_EN
+ msr CPUECTLR_EL1, x0
+ dsb sy
+ isb
+
+ ret
+
+/*
+ * part of CPU_SUSPEND
+ * this function puts the calling core, and potentially the soc, into a
+ * low-power state
+ * in: x0 = core mask lsb
+ * out: x0 = 0, success
+ * x0 < 0, failure
+ * uses x0, x1, x2, x3, x4, x5, x6, x7, x8
+ */
+_soc_sys_pwrdn_wfi:
+ /* Save LR to stack */
+ stp x18, x30, [sp, #-16]!
+
+ /* Poll PCPW20SR for all secondary cores to be placed in PW20 */
+ bl get_tot_num_cores
+ mov x3, #0x1
+ lsl x3, x3, x0
+ sub x3, x3, #2
+1:
+ mov x0, #NXP_PMU_ADDR
+ ldr w1, [x0, #PMU_PCPW20SR_OFFSET]
+ cmp w1, w3
+ b.ne 1b
+
+ /* backup EPU registers to stack */
+ mov x3, #NXP_PMU_ADDR
+ ldr x2, =NXP_EPU_ADDR
+ ldr w4, [x2, #EPU_EPIMCR10_OFFSET]
+ ldr w5, [x2, #EPU_EPCCR10_OFFSET]
+ ldr w6, [x2, #EPU_EPCTR10_OFFSET]
+ ldr w7, [x2, #EPU_EPGCR_OFFSET]
+ stp x4, x5, [sp, #-16]!
+ stp x6, x7, [sp, #-16]!
+
+ /*
+ * x2 = epu base addr
+ * x3 = pmu base addr
+ */
+
+ /* set up EPU event to receive the wake signal from PMU */
+ mov w4, #EPU_EPIMCR10_VAL
+ mov w5, #EPU_EPCCR10_VAL
+ mov w6, #EPU_EPCTR10_VAL
+ mov w7, #EPU_EPGCR_VAL
+ str w4, [x2, #EPU_EPIMCR10_OFFSET]
+ str w5, [x2, #EPU_EPCCR10_OFFSET]
+ str w6, [x2, #EPU_EPCTR10_OFFSET]
+ str w7, [x2, #EPU_EPGCR_OFFSET]
+
+ /*
+ * A-010194: There is logic problem
+ * in the path of GIC-to-PMU to issue
+ * wake request to core0
+ * Workaround: Re-target the wakeup interrupts
+ * to a core other than the last active core0
+ */
+ ldr x2, =NXP_GICD_ADDR
+
+ /* backup flextimer/mmc/usb interrupt router */
+ ldr x0, =GICD_IROUTER60_OFFSET
+ ldr x1, =GICD_IROUTER76_OFFSET
+ ldr w4, [x2, x0]
+ ldr w5, [x2, x1]
+ ldr x0, =GICD_IROUTER112_OFFSET
+ ldr x1, =GICD_IROUTER113_OFFSET
+ ldr w6, [x2, x0]
+ ldr w7, [x2, x1]
+ stp x4, x5, [sp, #-16]!
+ stp x6, x7, [sp, #-16]!
+
+ /*
+ * x2 = gicd base addr
+ * x0 = GICD_IROUTER112_OFFSET
+ * x1 = GICD_IROUTER113_OFFSET
+ */
+
+ /* re-route interrupt to cluster 1 */
+ ldr w4, =GICD_IROUTER_VALUE
+ str w4, [x2, x0]
+ str w4, [x2, x1]
+ ldr x0, =GICD_IROUTER60_OFFSET
+ ldr x1, =GICD_IROUTER76_OFFSET
+ str w4, [x2, x0]
+ str w4, [x2, x1]
+ dsb sy
+ isb
+
+ /* backup flextimer/mmc/usb interrupt enabler */
+ ldr x0, =GICD_ISENABLER_1
+ ldr w4, [x2, x0]
+ ldr x1, =GICD_ISENABLER_2
+ ldr w5, [x2, x1]
+ stp x4, x5, [sp, #-16]!
+
+ ldr x0, =GICD_ISENABLER_3
+ ldr w4, [x2, x0]
+ ldr x1, =GICD_ICENABLER_1
+ ldr w5, [x2, x1]
+ stp x4, x5, [sp, #-16]!
+
+ ldr x0, =GICD_ICENABLER_2
+ ldr w4, [x2, x0]
+ ldr x1, =GICD_ICENABLER_3
+ ldr w5, [x2, x1]
+ stp x4, x5, [sp, #-16]!
+
+ /* enable related interrupt routing */
+ ldr w4, =GICD_ISENABLER_1_VALUE
+ ldr x0, =GICD_ISENABLER_1
+ str w4, [x2, x0]
+ dsb sy
+ isb
+
+ ldr w4, =GICD_ISENABLER_2_VALUE
+ ldr x0, =GICD_ISENABLER_2
+ str w4, [x2, x0]
+ dsb sy
+ isb
+
+ ldr w4, =GICD_ISENABLER_3_VALUE
+ ldr x0, =GICD_ISENABLER_3
+ str w4, [x2, x0]
+ dsb sy
+ isb
+
+ /* set POWMGTDCR [STP_PV_EN] = 1 */
+ ldr x2, =NXP_POWMGTDCR
+ ldr w4, =0x01
+ str w4, [x2]
+
+ /* program IPSTPCR for override stop request (except DDR) */
+ mov x3, #NXP_PMU_ADDR
+
+ /* build an override mask for IPSTPCR4/IPSTPACK4/DEVDISR5 */
+ ldr x2, =PMU_IPPDEXPCR4_OFFSET
+ ldr w7, [x3, x2]
+
+ mov x5, xzr
+ ldr x6, =IPPDEXPCR4_MASK
+ and x6, x6, x7
+ cbz x6, 1f
+
+ /*
+ * x5 = override mask
+ * x6 = IPPDEXPCR bits for DEVDISR5
+ * x7 = IPPDEXPCR
+ */
+
+ /* get the overrides */
+ orr x4, x5, #DEVDISR5_FLX_TMR
+ tst x6, #IPPDEXPCR_FLX_TMR
+ csel x5, x5, x4, EQ
+1:
+ /* store the DEVDISR5 override mask */
+ ldr x2, =BC_PSCI_BASE
+ add x2, x2, #AUX_01_DATA
+ str w5, [x2, #DEVDISR5_MASK_OFFSET]
+
+ mov x3, #NXP_PMU_ADDR
+
+ /* write IPSTPCR0 - no overrides */
+ ldr x2, =PMU_IPSTPCR0_OFFSET
+ ldr w5, =IPSTPCR0_VALUE
+ str w5, [x3, x2]
+
+ /* write IPSTPCR1 - no overrides */
+ ldr x2, =PMU_IPSTPCR1_OFFSET
+ ldr w5, =IPSTPCR1_VALUE
+ str w5, [x3, x2]
+
+ /* write IPSTPCR2 - no overrides */
+ ldr x2, =PMU_IPSTPCR2_OFFSET
+ ldr w5, =IPSTPCR2_VALUE
+ str w5, [x3, x2]
+
+ /* write IPSTPCR3 - no overrides */
+ ldr x2, =PMU_IPSTPCR3_OFFSET
+ ldr w5, =IPSTPCR3_VALUE
+ str w5, [x3, x2]
+
+ /* write IPSTPCR4 - overrides possible */
+ ldr x2, =BC_PSCI_BASE
+ add x2, x2, #AUX_01_DATA
+ ldr w6, [x2, #DEVDISR5_MASK_OFFSET]
+ ldr x2, =PMU_IPSTPCR4_OFFSET
+ ldr w5, =IPSTPCR4_VALUE
+ bic x5, x5, x6
+ str w5, [x3, x2]
+
+ /* write IPSTPCR5 - no overrides */
+ ldr x2, =PMU_IPSTPCR5_OFFSET
+ ldr w5, =IPSTPCR5_VALUE
+ str w5, [x3, x2]
+
+ /* write IPSTPCR6 - no overrides */
+ ldr x2, =PMU_IPSTPCR6_OFFSET
+ ldr w5, =IPSTPCR6_VALUE
+ str w5, [x3, x2]
+
+ /* poll IPSTPACK for IP stop acknowledgment (except DDR) */
+ mov x3, #NXP_PMU_ADDR
+
+ /* poll on IPSTPACK0 */
+ ldr x2, =PMU_IPSTPACK0_OFFSET
+ ldr x4, =IPSTPCR0_VALUE
+ ldr x7, =IPSTPACK_RETRY_CNT
+3:
+ ldr w0, [x3, x2]
+ cmp x0, x4
+ b.eq 14f
+ sub x7, x7, #1
+ cbnz x7, 3b
+
+14:
+ /* poll on IPSTPACK1 */
+ ldr x2, =PMU_IPSTPACK1_OFFSET
+ ldr x4, =IPSTPCR1_VALUE
+ ldr x7, =IPSTPACK_RETRY_CNT
+4:
+ ldr w0, [x3, x2]
+ cmp x0, x4
+ b.eq 15f
+ sub x7, x7, #1
+ cbnz x7, 4b
+
+15:
+ /* poll on IPSTPACK2 */
+ ldr x2, =PMU_IPSTPACK2_OFFSET
+ ldr x4, =IPSTPCR2_VALUE
+ ldr x7, =IPSTPACK_RETRY_CNT
+5:
+ ldr w0, [x3, x2]
+ cmp x0, x4
+ b.eq 16f
+ sub x7, x7, #1
+ cbnz x7, 5b
+
+16:
+ /* poll on IPSTPACK3 */
+ ldr x2, =PMU_IPSTPACK3_OFFSET
+ ldr x4, =IPSTPCR3_VALUE
+ ldr x7, =IPSTPACK_RETRY_CNT
+6:
+ ldr w0, [x3, x2]
+ cmp x0, x4
+ b.eq 17f
+ sub x7, x7, #1
+ cbnz x7, 6b
+
+17:
+ /* poll on IPSTPACK4 */
+ ldr x2, =PMU_IPSTPACK4_OFFSET
+ ldr x4, =IPSTPCR4_VALUE
+ ldr x7, =IPSTPACK_RETRY_CNT
+7:
+ ldr w0, [x3, x2]
+ cmp x0, x4
+ b.eq 18f
+ sub x7, x7, #1
+ cbnz x7, 7b
+
+18:
+ /* poll on IPSTPACK5 */
+ ldr x2, =PMU_IPSTPACK5_OFFSET
+ ldr x4, =IPSTPCR5_VALUE
+ ldr x7, =IPSTPACK_RETRY_CNT
+8:
+ ldr w0, [x3, x2]
+ cmp x0, x4
+ b.eq 19f
+ sub x7, x7, #1
+ cbnz x7, 8b
+
+19:
+ /* poll on IPSTPACK6 */
+ ldr x2, =PMU_IPSTPACK6_OFFSET
+ ldr x4, =IPSTPCR6_VALUE
+ ldr x7, =IPSTPACK_RETRY_CNT
+9:
+ ldr w0, [x3, x2]
+ cmp x0, x4
+ b.eq 20f
+ sub x7, x7, #1
+ cbnz x7, 9b
+
+20:
+ /* save current DEVDISR states to DDR. */
+ ldr x2, =NXP_DCFG_ADDR
+
+ /* save DEVDISR1 and load new value */
+ ldr x0, =DCFG_DEVDISR1_OFFSET
+ ldr w1, [x2, x0]
+ mov w13, w1
+ ldr x1, =DEVDISR1_VALUE
+ str w1, [x2, x0]
+ /* save DEVDISR2 and load new value */
+ ldr x0, =DCFG_DEVDISR2_OFFSET
+ ldr w1, [x2, x0]
+ mov w14, w1
+ ldr x1, =DEVDISR2_VALUE
+ str w1, [x2, x0]
+
+ /* x6 = DEVDISR5 override mask */
+
+ /* save DEVDISR3 and load new value */
+ ldr x0, =DCFG_DEVDISR3_OFFSET
+ ldr w1, [x2, x0]
+ mov w15, w1
+ ldr x1, =DEVDISR3_VALUE
+ str w1, [x2, x0]
+
+ /* save DEVDISR4 and load new value */
+ ldr x0, =DCFG_DEVDISR4_OFFSET
+ ldr w1, [x2, x0]
+ mov w16, w1
+ /* not stop uart print */
+ ldr x1, =0x0000332
+ str w1, [x2, x0]
+
+ /* save DEVDISR5 and load new value */
+ ldr x0, =DCFG_DEVDISR5_OFFSET
+ ldr w1, [x2, x0]
+ mov w17, w1
+ /* Enable this wakeup will fail, should enable OCRAM */
+ ldr x1, =0x00102300
+ str w1, [x2, x0]
+
+ /* save DEVDISR6 and load new value */
+ ldr x0, =DCFG_DEVDISR6_OFFSET
+ ldr w1, [x2, x0]
+ mov w18, w1
+ ldr x1, =DEVDISR6_VALUE
+ str w1, [x2, x0]
+
+ /*
+ * w13 = DEVDISR1 saved value
+ * w14 = DEVDISR2 saved value
+ * w15 = DEVDISR3 saved value
+ * w16 = DEVDISR4 saved value
+ * w17 = DEVDISR5 saved value
+ * w18 = DEVDISR6 saved value
+ */
+ /*
+ * A-009810: LPM20 entry sequence might cause
+ * spurious timeout reset request
+ * workaround: MASK RESET REQ RPTOE
+ */
+ ldr x0, =NXP_RESET_ADDR
+ ldr w1, =RSTRQMR_RPTOE_MASK
+ str w1, [x0, #RST_RSTRQMR1_OFFSET]
+
+ /* disable SEC, QBman spi and qspi */
+ ldr x2, =NXP_DCFG_ADDR
+ ldr x0, =DCFG_DEVDISR1_OFFSET
+ ldr w1, =DCFG_DEVDISR1_SEC
+ str w1, [x2, x0]
+ ldr x0, =DCFG_DEVDISR3_OFFSET
+ ldr w1, =DCFG_DEVDISR3_QBMAIN
+ str w1, [x2, x0]
+ ldr x0, =DCFG_DEVDISR4_OFFSET
+ ldr w1, =DCFG_DEVDISR4_SPI_QSPI
+ str w1, [x2, x0]
+
+ /*
+ * write the GICR_WAKER.ProcessorSleep bits to 1
+ * enable the WakeRequest signal
+ * x3 is cpu mask starting from cpu7
+ */
+ bl get_tot_num_cores
+ sub x0, x0, #1
+ mov x3, #0x1
+ lsl x3, x3, x0
+2:
+ mov x0, x3
+ bl get_gic_rd_base
+ ldr w1, [x0, #GICR_WAKER_OFFSET]
+ orr w1, w1, #GICR_WAKER_SLEEP_BIT
+ str w1, [x0, #GICR_WAKER_OFFSET]
+1:
+ ldr w1, [x0, #GICR_WAKER_OFFSET]
+ cmp w1, #GICR_WAKER_ASLEEP
+ b.ne 1b
+
+ lsr x3, x3, #1
+ cbnz x3, 2b
+
+ /* x3 = pmu base addr */
+
+ /* perform Icache Warming Sequence */
+ ldr x5, =IPSTPCR4_VALUE
+ mov x6, DDR_CNTRL_BASE_ADDR
+ mov x7, #NXP_PMU_ADDR
+ mov x8, #NXP_DCFG_ADDR
+ mov x10, #PMU_IPSTPCR4_OFFSET
+ mov x11, #PMU_IPSTPACK4_OFFSET
+ mov x12, #PMU_IPSTPCR3_OFFSET
+ mov x18, #PMU_IPSTPCR2_OFFSET
+ mov x19, #PMU_IPSTPCR1_OFFSET
+ mov x21, #PMU_IPSTPCR0_OFFSET
+ ldr x22, =DCFG_DEVDISR5_OFFSET
+ ldr x23, =NXP_EPU_ADDR
+ mov x9, #CORE_RESTARTABLE
+ bl final_pwrdown
+
+ /*
+ * disable the WakeRequest signal on cpu 0-7
+ * x3 is cpu mask starting from cpu7
+ */
+ bl get_tot_num_cores
+ sub x0, x0, #1
+ mov x3, #0x1
+ lsl x3, x3, x0
+2:
+ mov x0, x3
+ bl get_gic_rd_base
+ ldr w1, [x0, #GICR_WAKER_OFFSET]
+ bic w1, w1, #GICR_WAKER_SLEEP_BIT
+ str w1, [x0, #GICR_WAKER_OFFSET]
+1:
+ ldr w1, [x0, #GICR_WAKER_OFFSET]
+ cbnz w1, 1b
+
+ lsr x3, x3, #1
+ cbnz x3, 2b
+
+ /* set SGI for secondary core wakeup */
+ ldr x0, =0x1000002
+ msr S3_0_C12_C11_7, x0
+ isb
+ ldr x0, =0x2000004
+ msr S3_0_C12_C11_7, x0
+ isb
+ ldr x0, =0x3000008
+ msr S3_0_C12_C11_7, x0
+ isb
+ ldr x0, =0x4010001
+ msr S3_0_C12_C11_7, x0
+ isb
+ ldr x0, =0x5010002
+ msr S3_0_C12_C11_7, x0
+ isb
+ ldr x0, =0x6010004
+ msr S3_0_C12_C11_7, x0
+ isb
+ ldr x0, =0x7010008
+ msr S3_0_C12_C11_7, x0
+
+ /* enable SEC, QBman spi and qspi */
+ ldr x2, =NXP_DCFG_ADDR
+ str wzr, [x2, #DCFG_DEVDISR1_OFFSET]
+ str wzr, [x2, #DCFG_DEVDISR3_OFFSET]
+ str wzr, [x2, #DCFG_DEVDISR4_OFFSET]
+
+ /* clear POWMGTDCR [STP_PV_EN] */
+ ldr x2, =NXP_POWMGTDCR
+ ldr w4, [x2]
+ bic w4, w4, #0x01
+ str w4, [x2]
+
+ /* restore flextimer/mmc/usb interrupt enabler */
+ ldr x3, =NXP_GICD_ADDR
+ ldp x0, x2, [sp], #16
+ ldr x1, =GICD_ICENABLER_2
+ mvn w0, w0
+ str w0, [x3, x1]
+ ldr x1, =GICD_ICENABLER_3
+ mvn w2, w2
+ str w2, [x3, x1]
+
+ ldp x0, x2, [sp], #16
+ ldr x1, =GICD_ISENABLER_3
+ str w0, [x3, x1]
+ ldr x1, =GICD_ICENABLER_1
+ mvn w2, w2
+ str w0, [x3, x1]
+
+ ldp x0, x2, [sp], #16
+ ldr x1, =GICD_ISENABLER_1
+ str w0, [x3, x1]
+ ldr x1, =GICD_ISENABLER_2
+ str w0, [x3, x1]
+
+ /* restore flextimer/mmc/usb interrupt router */
+ ldr x3, =NXP_GICD_ADDR
+ ldp x0, x2, [sp], #16
+ ldr x1, =GICD_IROUTER113_OFFSET
+ str w2, [x3, x1]
+ ldr x1, =GICD_IROUTER112_OFFSET
+ str w0, [x3, x1]
+ ldp x0, x2, [sp], #16
+ ldr x1, =GICD_IROUTER76_OFFSET
+ str w2, [x3, x1]
+ ldr x1, =GICD_IROUTER60_OFFSET
+ str w0, [x3, x1]
+
+ /* restore EPU registers */
+ ldr x3, =NXP_EPU_ADDR
+ ldp x0, x2, [sp], #16
+ str w2, [x3, #EPU_EPGCR_OFFSET]
+ str w0, [x3, #EPU_EPCTR10_OFFSET]
+ ldp x2, x1, [sp], #16
+ str w1, [x3, #EPU_EPCCR10_OFFSET]
+ str w2, [x3, #EPU_EPIMCR10_OFFSET]
+
+ isb
+ /* Restor LR */
+ ldp x18, x30, [sp], #16
+ ret
+
+/*
+ * part of CPU_SUSPEND
+ * this function performs any SoC-specific cleanup after power-down
+ * in: x0 = core mask lsb
+ * out: none
+ * uses x0, x1
+ */
+_soc_sys_exit_pwrdn:
+ mrs x1, SCTLR_EL1
+ orr x1, x1, #SCTLR_I_MASK
+ msr SCTLR_EL1, x1
+ isb
+ ret
+
+/*
+ * this function checks to see if cores which are to be disabled have been
+ * released from reset - if not, it releases them
+ * in: none
+ * out: none
+ * uses x0, x1, x2, x3, x4, x5, x6, x7, x8
+ */
+release_disabled:
+ mov x8, x30
+
+ /* read COREDISABLESR */
+ mov x0, #NXP_DCFG_ADDR
+ ldr w4, [x0, #DCFG_COREDISABLEDSR_OFFSET]
+
+ /* get the number of cpus on this device */
+ mov x6, #PLATFORM_CORE_COUNT
+
+ mov x0, #NXP_RESET_ADDR
+ ldr w5, [x0, #BRR_OFFSET]
+
+ /* load the core mask for the first core */
+ mov x7, #1
+
+ /*
+ * x4 = COREDISABLESR
+ * x5 = BRR
+ * x6 = loop count
+ * x7 = core mask bit
+ */
+2:
+ /* check if the core is to be disabled */
+ tst x4, x7
+ b.eq 1f
+
+ /* see if disabled cores have already been released from reset */
+ tst x5, x7
+ b.ne 1f
+
+ /* if core has not been released, then release it (0-3) */
+ mov x0, x7
+ bl _soc_core_release
+
+ /* record the core state in the data area (0-3) */
+ mov x0, x7
+ mov x1, #CORE_DISABLED
+ bl _setCoreState
+
+1:
+ /* decrement the counter */
+ subs x6, x6, #1
+ b.le 3f
+
+ /* shift the core mask to the next core */
+ lsl x7, x7, #1
+ /* continue */
+ b 2b
+3:
+ mov x30, x8
+ ret
+
+/*
+ * write a register in the DCFG block
+ * in: x0 = offset
+ * in: w1 = value to write
+ * uses x0, x1, x2
+ */
+_write_reg_dcfg:
+ ldr x2, =NXP_DCFG_ADDR
+ str w1, [x2, x0]
+ ret
+
+/*
+ * read a register in the DCFG block
+ * in: x0 = offset
+ * out: w0 = value read
+ * uses x0, x1
+ */
+_read_reg_dcfg:
+ ldr x1, =NXP_DCFG_ADDR
+ ldr w0, [x1, x0]
+ ret
+
+/*
+ * this function sets up the TrustZone Address Space Controller (TZASC)
+ * in: none
+ * out: none
+ * uses x0, x1
+ */
+init_tzpc:
+ /*
+ * set Non Secure access for all devices protected via TZPC
+ * decode Protection-0 Set Reg
+ */
+ ldr x1, =TZPCDECPROT_0_SET_BASE
+ /* set decode region to NS, Bits[7:0] */
+ mov w0, #0xFF
+ str w0, [x1]
+
+ /* decode Protection-1 Set Reg */
+ ldr x1, =TZPCDECPROT_1_SET_BASE
+ /* set decode region to NS, Bits[7:0] */
+ mov w0, #0xFF
+ str w0, [x1]
+
+ /* decode Protection-2 Set Reg */
+ ldr x1, =TZPCDECPROT_2_SET_BASE
+ /* set decode region to NS, Bits[7:0] */
+ mov w0, #0xFF
+ str w0, [x1]
+
+ /*
+ * entire SRAM as NS
+ * secure RAM region size Reg
+ */
+ ldr x1, =NXP_OCRAM_TZPC_ADDR
+ /* 0x00000000 = no secure region */
+ mov w0, #0x00000000
+ str w0, [x1]
+
+ ret
+
+/* this function performs initialization on SecMon for boot services */
+initSecMon:
+ /* read the register hpcomr */
+ ldr x1, =NXP_SNVS_ADDR
+ ldr w0, [x1, #SECMON_HPCOMR_OFFSET]
+ /* turn off secure access for the privileged registers */
+ orr w0, w0, #SECMON_HPCOMR_NPSWAEN
+ /* write back */
+ str w0, [x1, #SECMON_HPCOMR_OFFSET]
+
+ ret
+
+/*
+ * this function returns the redistributor base address for the core specified
+ * in x1
+ * in: x0 - core mask lsb of specified core
+ * out: x0 = redistributor rd base address for specified core
+ * uses x0, x1, x2
+ */
+get_gic_rd_base:
+ /* get the 0-based core number */
+ clz w1, w0
+ mov w2, #0x20
+ sub w2, w2, w1
+ sub w2, w2, #1
+
+ /* x2 = core number / loop counter */
+
+ ldr x0, =NXP_GICR_ADDR
+ mov x1, #GIC_RD_OFFSET
+2:
+ cbz x2, 1f
+ add x0, x0, x1
+ sub x2, x2, #1
+ b 2b
+1:
+ ret
+
+/*
+ * this function returns the redistributor base address for the core specified
+ * in x1
+ * in: x0 - core mask lsb of specified core
+ * out: x0 = redistributor sgi base address for specified core
+ * uses x0, x1, x2
+ */
+get_gic_sgi_base:
+ /* get the 0-based core number */
+ clz w1, w0
+ mov w2, #0x20
+ sub w2, w2, w1
+ sub w2, w2, #1
+
+ /* x2 = core number / loop counter */
+
+ ldr x0, =NXP_GICR_SGI_ADDR
+ mov x1, #GIC_SGI_OFFSET
+2:
+ cbz x2, 1f
+ add x0, x0, x1
+ sub x2, x2, #1
+ b 2b
+1:
+ ret
+
+/*
+ * this function returns an mpidr value for a core, given a core_mask_lsb
+ * in: x0 = core mask lsb
+ * out: x0 = affinity2:affinity1:affinity0, where affinity is 8-bits
+ * uses x0, x1
+ */
+get_mpidr_value:
+ /* convert a core mask to an SoC core number */
+ clz w0, w0
+ mov w1, #31
+ sub w0, w1, w0
+
+ /* w0 = SoC core number */
+
+ mov w1, wzr
+2:
+ cmp w0, #CORES_PER_CLUSTER
+ b.lt 1f
+ sub w0, w0, #CORES_PER_CLUSTER
+ add w1, w1, #MPIDR_CLUSTER
+ b 2b
+
+ /* insert the mpidr core number */
+1:
+ orr w0, w1, w0
+ ret
+
+/*
+ * write a register in the RESET block
+ * in: x0 = offset
+ * in: w1 = value to write
+ * uses x0, x1, x2
+ */
+_write_reg_reset:
+ ldr x2, =NXP_RESET_ADDR
+ str w1, [x2, x0]
+ ret
+
+/*
+ * read a register in the RESET block
+ * in: x0 = offset
+ * out: w0 = value read
+ * uses x0, x1
+ */
+_read_reg_reset:
+ ldr x1, =NXP_RESET_ADDR
+ ldr w0, [x1, x0]
+ ret
+
+/*
+ * this function will pwrdown ddr and the final core - it will do this
+ * by loading itself into the icache and then executing from there
+ * in: x5 = ipstpcr4 (IPSTPCR4_VALUE bic DEVDISR5_MASK)
+ * x6 = DDR_CNTRL_BASE_ADDR
+ * x7 = NXP_PMU_ADDR
+ * x8 = NXP_DCFG_ADDR
+ * x9 = 0, restartable
+ * = 1, non-restartable
+ * x10 = PMU_IPSTPCR4_OFFSET
+ * x11 = PMU_IPSTPACK4_OFFSET
+ * x12 = PMU_IPSTPCR3_OFFSET
+ * x18 = PMU_IPSTPCR2_OFFSET
+ * x19 = PMU_IPSTPCR1_OFFSET
+ * x21 = PMU_IPSTPCR0_OFFSET
+ * w13 = DEVDISR1 saved value
+ * w14 = DEVDISR2 saved value
+ * w15 = DEVDISR3 saved value
+ * w16 = DEVDISR4 saved value
+ * w17 = DEVDISR5 saved value
+ * x22 = DCFG_DEVDISR5_OFFSET
+ * x23 = NXP_EPU_ADDR
+ * out: none
+ * uses x0, x1, x2, x3, x4, x5, x6, x7, x8, x9, x13, x14, x15, x16, x17
+ * x10, x11, x12, x18, x19, x21, x22, x23
+ */
+
+final_pwrdown:
+ /* delay */
+ mov w4, #0xffffff
+554:
+ sub w4, w4, #1
+ cmp w4, #0
+ b.ge 554b
+
+ mov x0, xzr
+ b touch_line_0
+
+/* 4Kb aligned */
+.align 12
+start_line_0:
+ mov x0, #1
+ /* put ddr in self refresh - start */
+ mov x2, #DDR_SDRAM_CFG_2_FRCSR
+ ldr w3, [x6, #DDR_SDRAM_CFG_2_OFFSET]
+ orr w3, w3, w2
+ /* put ddr in self refresh - end */
+ str w3, [x6, #DDR_SDRAM_CFG_2_OFFSET]
+ nop
+ nop
+touch_line_0:
+ cbz x0, touch_line_1
+
+start_line_1:
+ /* quiesce ddr clocks - start */
+ orr w3, w5, #DCFG_DEVDISR5_MEM
+ mov w4, w3
+ /* quiesce ddr clocks - end */
+ str w4, [x7, x10]
+ mov w3, #DCFG_DEVDISR5_MEM
+ /* poll on ipstpack4 - start */
+ mov x2, #DDR_SLEEP_RETRY_CNT
+ nop
+ nop
+touch_line_1:
+ cbz x0, touch_line_2
+
+start_line_2:
+ /* x11 = PMU_IPSTPACK4_OFFSET */
+ ldr w1, [x7, x11]
+ tst w1, w3
+ b.ne 5f
+ subs x2, x2, #1
+ /* poll on ipstpack4 - end */
+ b.gt start_line_2
+
+ /* if we get here, we have a timeout err */
+ mov w4, w5
+ /* x10 = PMU_IPSTPCR4_OFFSET re-enable ddr clks interface */
+ str w4, [x7, x10]
+touch_line_2:
+ cbz x0, touch_line_3
+
+start_line_3:
+ /* load error code */
+ mov x0, #ERROR_DDR_SLEEP
+ b 2f
+5:
+ wfe
+ ldr w1, [x23, #EPU_EPCTR10_OFFSET]
+ cbz w1, 5b
+
+ mov w4, w5
+touch_line_3:
+ cbz x0, touch_line_4
+
+start_line_4:
+ /* re-enable ddr in devdisr5 */
+ str w4, [x8, x22]
+ /* re-enable ddr clk in ipstpcr4 */
+ str w4, [x7, x10]
+13:
+ /* poll on ipstpack4 - start */
+ ldr w1, [x7, x11]
+ tst w1, w3
+ b.eq 2f
+ nop
+ b 13b
+ /* poll on ipstpack4 - end */
+2:
+touch_line_4:
+ cbz x0, touch_line_5
+
+start_line_5:
+ /* take ddr out-of self refresh - start */
+ mov x2, #DDR_SDRAM_CFG_2_FRCSR
+ ldr w3, [x6, #DDR_SDRAM_CFG_2_OFFSET]
+ mov w4, w3
+ bic w4, w4, w2
+ mov w3, w4
+ /* wait for ddr cntrlr clock- start */
+ mov x1, #DDR_SLEEP_RETRY_CNT
+3:
+ subs x1, x1, #1
+touch_line_5:
+ cbz x0, touch_line_6
+
+start_line_6:
+ /* wait for ddr cntrlr clock - end */
+ b.gt 3b
+ /* take ddr out-of self refresh - end */
+ str w3, [x6, #DDR_SDRAM_CFG_2_OFFSET]
+ mov w1, w17
+ /* reset devdisr5 */
+ str w1, [x8, #DCFG_DEVDISR5_OFFSET]
+ mov w1, w16
+ /* reset devdisr4 */
+ str w1, [x8, #DCFG_DEVDISR4_OFFSET]
+ mov w1, w15
+touch_line_6:
+ cbz x0, touch_line_7
+
+start_line_7:
+ /* reset devdisr3 */
+ str w1, [x8, #DCFG_DEVDISR3_OFFSET]
+ mov w1, w14
+ /* reset devdisr2 */
+ str w1, [x8, #DCFG_DEVDISR2_OFFSET]
+ mov w1, w13
+ /* reset devdisr1 */
+ str w1, [x8, #DCFG_DEVDISR1_OFFSET]
+ /* reset ipstpcr4 */
+ str wzr, [x7, x10]
+ /* reset ipstpcr3 */
+ str wzr, [x7, x12]
+touch_line_7:
+ cbz x0, touch_line_8
+
+start_line_8:
+ /* reset ipstpcr2 */
+ str wzr, [x7, x18]
+ /* reset ipstpcr1 */
+ str wzr, [x7, x19]
+ /* reset ipstpcr0 */
+ str wzr, [x7, x21]
+
+touch_line_8:
+ cbz x0, touch_line_9
+
+start_line_9:
+ b continue_restart
+touch_line_9:
+ cbz x0, start_line_0
+
+/* execute here after ddr is back up */
+continue_restart:
+ /*
+ * if x0 = 1, all is well
+ * if x0 < 1, we had an error
+ */
+ cmp x0, #1
+ b.ne 4f
+ mov x0, #0
+4:
+ ret
diff --git a/plat/nxp/soc-ls1088a/aarch64/ls1088a_helpers.S b/plat/nxp/soc-ls1088a/aarch64/ls1088a_helpers.S
new file mode 100644
index 0000000..890cf81
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/aarch64/ls1088a_helpers.S
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <platform_def.h>
+
+ .globl plat_secondary_cold_boot_setup
+ .globl plat_is_my_cpu_primary
+ .globl plat_reset_handler
+ .globl platform_mem_init
+
+func platform_mem1_init
+ ret
+endfunc platform_mem1_init
+
+func platform_mem_init
+ ret
+endfunc platform_mem_init
+
+func apply_platform_errata
+ ret
+endfunc apply_platform_errata
+
+func plat_reset_handler
+ mov x29, x30
+ bl apply_platform_errata
+
+#if defined(IMAGE_BL31)
+ ldr x0, =POLICY_SMMU_PAGESZ_64K
+ cbz x0, 1f
+ /* Set the SMMU page size in the sACR register */
+ bl _set_smmu_pagesz_64
+#endif
+1:
+ mov x30, x29
+ ret
+endfunc plat_reset_handler
+
+ /*
+ * void plat_secondary_cold_boot_setup (void);
+ *
+ * This function performs any platform specific actions
+ * needed for a secondary cpu after a cold reset e.g
+ * mark the cpu's presence, mechanism to place it in a
+ * holding pen etc.
+ */
+func plat_secondary_cold_boot_setup
+ /* ls1088a does not do cold boot for secondary CPU */
+cb_panic:
+ b cb_panic
+endfunc plat_secondary_cold_boot_setup
+
+ /*
+ * unsigned int plat_is_my_cpu_primary (void);
+ *
+ * Find out whether the current cpu is the primary
+ * cpu.
+ */
+func plat_is_my_cpu_primary
+ mrs x0, mpidr_el1
+ and x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
+ cmp x0, 0x0
+ cset w0, eq
+ ret
+endfunc plat_is_my_cpu_primary
diff --git a/plat/nxp/soc-ls1088a/include/soc.h b/plat/nxp/soc-ls1088a/include/soc.h
new file mode 100644
index 0000000..eb36c2e
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/include/soc.h
@@ -0,0 +1,229 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SOC_H
+#define SOC_H
+
+/* Chassis specific defines - common across SoC's of a particular platform */
+#include "dcfg_lsch3.h"
+#include "soc_default_base_addr.h"
+#include "soc_default_helper_macros.h"
+
+/*
+ * SVR Definition of LS1088A
+ * A: without security
+ * AE: with security
+ * (not include major and minor rev)
+ */
+#define SVR_LS1044A 0x870323
+#define SVR_LS1044AE 0x870322
+#define SVR_LS1048A 0x870321
+#define SVR_LS1048AE 0x870320
+#define SVR_LS1084A 0x870303
+#define SVR_LS1084AE 0x870302
+#define SVR_LS1088A 0x870301
+#define SVR_LS1088AE 0x870300
+
+#define SVR_WO_E 0xFFFFFE
+
+/* Number of cores in platform */
+#define NUMBER_OF_CLUSTERS 2
+#define CORES_PER_CLUSTER 4
+#define PLATFORM_CORE_COUNT (NUMBER_OF_CLUSTERS * CORES_PER_CLUSTER)
+
+/* set to 0 if the clusters are not symmetrical */
+#define SYMMETRICAL_CLUSTERS 1
+
+
+#define NUM_DRAM_REGIONS 2
+#define NXP_DRAM0_ADDR 0x80000000
+#define NXP_DRAM0_MAX_SIZE 0x80000000 /* 2 GB */
+
+#define NXP_DRAM1_ADDR 0x8080000000
+#define NXP_DRAM1_MAX_SIZE 0x7F80000000 /* 510 G */
+
+/* DRAM0 Size defined in platform_def.h */
+#define NXP_DRAM0_SIZE PLAT_DEF_DRAM0_SIZE
+
+#define NXP_POWMGTDCR 0x700123C20
+
+/* epu register offsets and values */
+#define EPU_EPGCR_OFFSET 0x0
+#define EPU_EPIMCR10_OFFSET 0x128
+#define EPU_EPCTR10_OFFSET 0xa28
+#define EPU_EPCCR10_OFFSET 0x828
+
+#ifdef EPU_EPCCR10_VAL
+#undef EPU_EPCCR10_VAL
+#endif
+#define EPU_EPCCR10_VAL 0xf2800000
+
+#define EPU_EPIMCR10_VAL 0xba000000
+#define EPU_EPCTR10_VAL 0x0
+#define EPU_EPGCR_VAL (1 << 31)
+
+/* pmu register offsets and values */
+#define PMU_PCPW20SR_OFFSET 0x830
+#define PMU_CLAINACTSETR_OFFSET 0x1100
+#define PMU_CLAINACTCLRR_OFFSET 0x1104
+#define PMU_CLSINACTSETR_OFFSET 0x1108
+#define PMU_CLSINACTCLRR_OFFSET 0x110C
+#define PMU_CLL2FLUSHSETR_OFFSET 0x1110
+#define PMU_CLSL2FLUSHCLRR_OFFSET 0x1114
+#define PMU_CLL2FLUSHSR_OFFSET 0x1118
+#define PMU_POWMGTCSR_OFFSET 0x4000
+#define PMU_IPPDEXPCR0_OFFSET 0x4040
+#define PMU_IPPDEXPCR1_OFFSET 0x4044
+#define PMU_IPPDEXPCR2_OFFSET 0x4048
+#define PMU_IPPDEXPCR3_OFFSET 0x404C
+#define PMU_IPPDEXPCR4_OFFSET 0x4050
+#define PMU_IPPDEXPCR5_OFFSET 0x4054
+#define PMU_IPSTPCR0_OFFSET 0x4120
+#define PMU_IPSTPCR1_OFFSET 0x4124
+#define PMU_IPSTPCR2_OFFSET 0x4128
+#define PMU_IPSTPCR3_OFFSET 0x412C
+#define PMU_IPSTPCR4_OFFSET 0x4130
+#define PMU_IPSTPCR5_OFFSET 0x4134
+#define PMU_IPSTPCR6_OFFSET 0x4138
+#define PMU_IPSTPACK0_OFFSET 0x4140
+#define PMU_IPSTPACK1_OFFSET 0x4144
+#define PMU_IPSTPACK2_OFFSET 0x4148
+#define PMU_IPSTPACK3_OFFSET 0x414C
+#define PMU_IPSTPACK4_OFFSET 0x4150
+#define PMU_IPSTPACK5_OFFSET 0x4154
+#define PMU_IPSTPACK6_OFFSET 0x4158
+#define PMU_POWMGTCSR_VAL (1 << 20)
+
+#define IPPDEXPCR0_MASK 0xFFFFFFFF
+#define IPPDEXPCR1_MASK 0xFFFFFFFF
+#define IPPDEXPCR2_MASK 0xFFFFFFFF
+#define IPPDEXPCR3_MASK 0xFFFFFFFF
+#define IPPDEXPCR4_MASK 0xFFFFFFFF
+#define IPPDEXPCR5_MASK 0xFFFFFFFF
+
+/* DEVDISR5_FLX_TMR */
+#define IPPDEXPCR_FLX_TMR 0x00004000
+#define DEVDISR5_FLX_TMR 0x00004000
+
+#define IPSTPCR0_VALUE 0x0041310C
+#define IPSTPCR1_VALUE 0x000003FF
+#define IPSTPCR2_VALUE 0x00013006
+
+/* Dont' stop UART */
+#define IPSTPCR3_VALUE 0x0000033A
+
+#define IPSTPCR4_VALUE 0x00103300
+#define IPSTPCR5_VALUE 0x00000001
+#define IPSTPCR6_VALUE 0x00000000
+
+
+#define TZPC_BLOCK_SIZE 0x1000
+
+/* PORSR1 */
+#define PORSR1_RCW_MASK 0xFF800000
+#define PORSR1_RCW_SHIFT 23
+
+/* CFG_RCW_SRC[6:0] */
+#define RCW_SRC_TYPE_MASK 0x70
+
+/* RCW SRC NOR */
+#define NOR_16B_VAL 0x20
+
+/*
+ * RCW SRC Serial Flash
+ * 1. SERAIL NOR (QSPI)
+ * 2. OTHERS (SD/MMC, SPI, I2C1)
+ */
+#define RCW_SRC_SERIAL_MASK 0x7F
+#define QSPI_VAL 0x62
+#define SDHC_VAL 0x40
+#define EMMC_VAL 0x41
+
+/*
+ * Required LS standard platform porting definitions
+ * for CCN-504 - Read from RN-F node ID register
+ */
+#define PLAT_CLUSTER_TO_CCN_ID_MAP 1, 9, 11, 19
+
+/* Defines required for using XLAT tables from ARM common code */
+#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 40)
+#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 40)
+
+/*
+ * Clock Divisors
+ */
+#define NXP_PLATFORM_CLK_DIVIDER 1
+#define NXP_UART_CLK_DIVIDER 2
+
+/* dcfg register offsets and values */
+#define DCFG_DEVDISR1_OFFSET 0x70
+#define DCFG_DEVDISR2_OFFSET 0x74
+#define DCFG_DEVDISR3_OFFSET 0x78
+#define DCFG_DEVDISR5_OFFSET 0x80
+#define DCFG_DEVDISR6_OFFSET 0x84
+
+#define DCFG_DEVDISR1_SEC (1 << 22)
+#define DCFG_DEVDISR3_QBMAIN (1 << 12)
+#define DCFG_DEVDISR4_SPI_QSPI (1 << 4 | 1 << 5)
+#define DCFG_DEVDISR5_MEM (1 << 0)
+
+#define DEVDISR1_VALUE 0x0041310c
+#define DEVDISR2_VALUE 0x000003ff
+#define DEVDISR3_VALUE 0x00013006
+#define DEVDISR4_VALUE 0x0000033e
+#define DEVDISR5_VALUE 0x00103300
+#define DEVDISR6_VALUE 0x00000001
+
+/*
+ * pwr mgmt features supported in the soc-specific code:
+ * value == 0x0, the soc code does not support this feature
+ * value != 0x0, the soc code supports this feature
+ */
+#define SOC_CORE_RELEASE 0x1
+#define SOC_CORE_RESTART 0x1
+#define SOC_CORE_OFF 0x1
+#define SOC_CORE_STANDBY 0x1
+#define SOC_CORE_PWR_DWN 0x1
+#define SOC_CLUSTER_STANDBY 0x1
+#define SOC_CLUSTER_PWR_DWN 0x1
+#define SOC_SYSTEM_STANDBY 0x1
+#define SOC_SYSTEM_PWR_DWN 0x1
+#define SOC_SYSTEM_OFF 0x1
+#define SOC_SYSTEM_RESET 0x1
+
+#define SYSTEM_PWR_DOMAINS 1
+#define PLAT_NUM_PWR_DOMAINS (PLATFORM_CORE_COUNT + \
+ NUMBER_OF_CLUSTERS + \
+ SYSTEM_PWR_DOMAINS)
+
+/* Power state coordination occurs at the system level */
+#define PLAT_PD_COORD_LVL MPIDR_AFFLVL2
+#define PLAT_MAX_PWR_LVL PLAT_PD_COORD_LVL
+
+/* Local power state for power domains in Run state */
+#define LS_LOCAL_STATE_RUN PSCI_LOCAL_STATE_RUN
+
+/* define retention state */
+#define PLAT_MAX_RET_STATE (PSCI_LOCAL_STATE_RUN + 1)
+#define LS_LOCAL_STATE_RET PLAT_MAX_RET_STATE
+
+/* define power-down state */
+#define PLAT_MAX_OFF_STATE (PLAT_MAX_RET_STATE + 1)
+#define LS_LOCAL_STATE_OFF PLAT_MAX_OFF_STATE
+
+#ifndef __ASSEMBLER__
+/* CCI slave interfaces */
+static const int cci_map[] = {
+ 3,
+ 4,
+};
+void soc_init_lowlevel(void);
+void soc_init_percpu(void);
+void _soc_set_start_addr(unsigned long addr);
+void _set_platform_security(void);
+#endif
+
+#endif /* SOC_H */
diff --git a/plat/nxp/soc-ls1088a/ls1088aqds/ddr_init.c b/plat/nxp/soc-ls1088a/ls1088aqds/ddr_init.c
new file mode 100644
index 0000000..b7397ba
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/ddr_init.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+
+#include <common/debug.h>
+#include <ddr.h>
+#include <utils.h>
+
+#include <errata.h>
+#include <platform_def.h>
+
+#ifdef CONFIG_STATIC_DDR
+#error No static value defined
+#endif
+
+static const struct rc_timing rce[] = {
+ {U(1600), U(8), U(8)},
+ {U(1867), U(8), U(8)},
+ {U(2134), U(8), U(9)},
+ {}
+};
+
+static const struct board_timing udimm[] = {
+ {U(0x04), rce, U(0x01020307), U(0x08090b06)},
+};
+
+int ddr_board_options(struct ddr_info *priv)
+{
+ int ret;
+ struct memctl_opt *popts = &priv->opt;
+
+ if (popts->rdimm != 0) {
+ debug("RDIMM parameters not set.\n");
+ return -EINVAL;
+ }
+
+ ret = cal_board_params(priv, udimm, ARRAY_SIZE(udimm));
+ if (ret != 0) {
+ return ret;
+ }
+
+ popts->addr_hash = 1;
+ popts->cpo_sample = U(0x7b);
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
+ DDR_CDR1_ODT(DDR_CDR_ODT_60ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) |
+ DDR_CDR2_VREF_TRAIN_EN |
+ DDR_CDR2_VREF_RANGE_2;
+
+ return 0;
+}
+
+long long init_ddr(void)
+{
+ int spd_addr[] = { NXP_SPD_EEPROM0 };
+ struct ddr_info info;
+ struct sysinfo sys;
+ long long dram_size;
+
+ zeromem(&sys, sizeof(sys));
+ get_clocks(&sys);
+ debug("platform clock %lu\n", sys.freq_platform);
+ debug("DDR PLL %lu\n", sys.freq_ddr_pll0);
+
+ zeromem(&info, sizeof(struct ddr_info));
+ info.num_ctlrs = NUM_OF_DDRC;
+ info.dimm_on_ctlr = DDRC_NUM_DIMM;
+ info.clk = get_ddr_freq(&sys, 0);
+ info.spd_addr = spd_addr;
+ info.ddr[0] = (void *)NXP_DDR_ADDR;
+
+ dram_size = dram_init(&info);
+ if (dram_size < 0) {
+ ERROR("DDR init failed.\n");
+ }
+
+ erratum_a008850_post();
+
+ return dram_size;
+}
diff --git a/plat/nxp/soc-ls1088a/ls1088aqds/plat_def.h b/plat/nxp/soc-ls1088a/ls1088aqds/plat_def.h
new file mode 100644
index 0000000..ebd3a26
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/plat_def.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_DEF_H
+#define PLAT_DEF_H
+
+#include <arch.h>
+/*
+ * Required without TBBR.
+ * To include the defines for DDR PHY
+ * Images.
+ */
+#include <tbbr_img_def.h>
+
+#include <policy.h>
+#include <soc.h>
+
+#define NXP_SPD_EEPROM0 0x51
+
+#define NXP_SYSCLK_FREQ 100000000
+#define NXP_DDRCLK_FREQ 100000000
+
+/* UART related definition */
+#define NXP_CONSOLE_ADDR NXP_UART_ADDR
+#define NXP_CONSOLE_BAUDRATE 115200
+
+/* Size of cacheable stacks */
+#if defined(IMAGE_BL2)
+#if defined(TRUSTED_BOARD_BOOT)
+#define PLATFORM_STACK_SIZE 0x2000
+#else
+#define PLATFORM_STACK_SIZE 0x1000
+#endif
+#elif defined(IMAGE_BL31)
+#define PLATFORM_STACK_SIZE 0x1000
+#endif
+
+#define BL2_START NXP_OCRAM_ADDR
+#define BL2_LIMIT (NXP_OCRAM_ADDR + NXP_OCRAM_SIZE)
+#define BL2_NOLOAD_START NXP_OCRAM_ADDR
+#define BL2_NOLOAD_LIMIT BL2_BASE
+
+/* IO defines as needed by IO driver framework */
+#define MAX_IO_DEVICES 4
+#define MAX_IO_BLOCK_DEVICES 1
+#define MAX_IO_HANDLES 4
+
+/*
+ * FIP image defines - Offset at which FIP Image would be present
+ * Image would include Bl31 , Bl33 and Bl32 (optional)
+ */
+#ifdef POLICY_FUSE_PROVISION
+#define MAX_FIP_DEVICES 2
+#endif
+
+#ifndef MAX_FIP_DEVICES
+#define MAX_FIP_DEVICES 1
+#endif
+
+#define BL32_IRQ_SEC_PHY_TIMER 29
+#define BL31_WDOG_SEC 89
+
+/*
+ * ID of the secure physical generic timer interrupt used by the BL32.
+ */
+#define PLAT_LS_G1S_IRQ_PROPS(grp) \
+ INTR_PROP_DESC(BL32_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
+ GIC_INTR_CFG_LEVEL)
+
+/* SGI 15 and Secure watchdog interrupts assigned to Group 0 */
+#define PLAT_LS_G0_IRQ_PROPS(grp) \
+ INTR_PROP_DESC(BL31_WDOG_SEC, GIC_HIGHEST_SEC_PRIORITY, grp, \
+ GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(15, GIC_HIGHEST_SEC_PRIORITY, grp, \
+ GIC_INTR_CFG_LEVEL)
+
+
+#endif /* PLAT_DEF_H */
diff --git a/plat/nxp/soc-ls1088a/ls1088aqds/platform.c b/plat/nxp/soc-ls1088a/ls1088aqds/platform.c
new file mode 100644
index 0000000..8b3eada
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/platform.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat_common.h>
+
+#pragma weak board_enable_povdd
+#pragma weak board_disable_povdd
+
+bool board_enable_povdd(void)
+{
+#ifdef CONFIG_POVDD_ENABLE
+ return true;
+#else
+ return false;
+#endif
+}
+
+bool board_disable_povdd(void)
+{
+#ifdef CONFIG_POVDD_ENABLE
+ return true;
+#else
+ return false;
+#endif
+}
diff --git a/plat/nxp/soc-ls1088a/ls1088aqds/platform.mk b/plat/nxp/soc-ls1088a/ls1088aqds/platform.mk
new file mode 100644
index 0000000..97ccf26
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/platform.mk
@@ -0,0 +1,31 @@
+#
+# Copyright 2022 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# board-specific build parameters
+BOOT_MODE ?= qspi
+BOARD := ls1088aqds
+
+# DDR Compilation Configs
+NUM_OF_DDRC := 1
+DDRC_NUM_DIMM := 1
+DDR_ECC_EN := yes
+
+# On-Board Flash Details
+QSPI_FLASH_SZ := 0x4000000
+NOR_FLASH_SZ := 0x20000000
+
+BL2_SOURCES += ${BOARD_PATH}/ddr_init.c \
+ ${BOARD_PATH}/platform.c
+
+SUPPORTED_BOOT_MODE := qspi \
+ sd \
+ nor
+
+# Adding platform board build info
+include plat/nxp/common/plat_make_helper/plat_common_def.mk
+
+# Adding SoC build info
+include plat/nxp/soc-ls1088a/soc.mk
diff --git a/plat/nxp/soc-ls1088a/ls1088aqds/platform_def.h b/plat/nxp/soc-ls1088a/ls1088aqds/platform_def.h
new file mode 100644
index 0000000..7daf1c0
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/platform_def.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <plat_def.h>
+#include <plat_default_def.h>
+
+#endif /* PLATFORM_DEF_H */
diff --git a/plat/nxp/soc-ls1088a/ls1088aqds/policy.h b/plat/nxp/soc-ls1088a/ls1088aqds/policy.h
new file mode 100644
index 0000000..0eaafae
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/policy.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef POLICY_H
+#define POLICY_H
+
+/*
+ * Set this to 0x0 to leave the default SMMU page size in sACR
+ * Set this to 0x1 to change the SMMU page size to 64K
+ */
+#define POLICY_SMMU_PAGESZ_64K 0x1
+
+#endif /* POLICY_H */
diff --git a/plat/nxp/soc-ls1088a/ls1088ardb/ddr_init.c b/plat/nxp/soc-ls1088a/ls1088ardb/ddr_init.c
new file mode 100644
index 0000000..c88583f
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088ardb/ddr_init.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+
+#include <common/debug.h>
+#include <ddr.h>
+#include <utils.h>
+
+#include <errata.h>
+#include <platform_def.h>
+
+#ifdef CONFIG_STATIC_DDR
+#error No static value defined
+#endif
+
+static const struct rc_timing rce[] = {
+ {U(1600), U(8), U(8)},
+ {U(1867), U(8), U(8)},
+ {U(2134), U(8), U(9)},
+ {}
+};
+
+static const struct board_timing udimm[] = {
+ {U(0x04), rce, U(0x01030508), U(0x090b0d06)},
+ {U(0x1f), rce, U(0x01030508), U(0x090b0d06)},
+};
+
+int ddr_board_options(struct ddr_info *priv)
+{
+ int ret;
+ struct memctl_opt *popts = &priv->opt;
+
+ if (popts->rdimm != 0) {
+ debug("RDIMM parameters not set.\n");
+ return -EINVAL;
+ }
+
+ ret = cal_board_params(priv, udimm, ARRAY_SIZE(udimm));
+ if (ret != 0) {
+ return ret;
+ }
+
+ popts->addr_hash = 1;
+ popts->cpo_sample = U(0x7b);
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
+ DDR_CDR1_ODT(DDR_CDR_ODT_60ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) |
+ DDR_CDR2_VREF_TRAIN_EN |
+ DDR_CDR2_VREF_RANGE_2;
+
+ return 0;
+}
+
+long long init_ddr(void)
+{
+ int spd_addr[] = { NXP_SPD_EEPROM0 };
+ struct ddr_info info;
+ struct sysinfo sys;
+ long long dram_size;
+
+ zeromem(&sys, sizeof(sys));
+ get_clocks(&sys);
+ debug("platform clock %lu\n", sys.freq_platform);
+ debug("DDR PLL %lu\n", sys.freq_ddr_pll0);
+
+ zeromem(&info, sizeof(struct ddr_info));
+ info.num_ctlrs = NUM_OF_DDRC;
+ info.dimm_on_ctlr = DDRC_NUM_DIMM;
+ info.clk = get_ddr_freq(&sys, 0);
+ info.spd_addr = spd_addr;
+ info.ddr[0] = (void *)NXP_DDR_ADDR;
+
+ dram_size = dram_init(&info);
+
+ if (dram_size < 0) {
+ ERROR("DDR init failed.\n");
+ }
+
+ erratum_a008850_post();
+
+ return dram_size;
+}
diff --git a/plat/nxp/soc-ls1088a/ls1088ardb/plat_def.h b/plat/nxp/soc-ls1088a/ls1088ardb/plat_def.h
new file mode 100644
index 0000000..a6b14fe
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088ardb/plat_def.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_DEF_H
+#define PLAT_DEF_H
+
+#include <arch.h>
+/*
+ * Required without TBBR.
+ * To include the defines for DDR PHY
+ * Images.
+ */
+#include <tbbr_img_def.h>
+
+#include <policy.h>
+#include <soc.h>
+
+#define NXP_SPD_EEPROM0 0x51
+
+#define NXP_SYSCLK_FREQ 100000000
+#define NXP_DDRCLK_FREQ 100000000
+
+/* UART related definition */
+#define NXP_CONSOLE_ADDR NXP_UART_ADDR
+#define NXP_CONSOLE_BAUDRATE 115200
+
+/* Size of cacheable stacks */
+#if defined(IMAGE_BL2)
+#if defined(TRUSTED_BOARD_BOOT)
+#define PLATFORM_STACK_SIZE 0x2000
+#else
+#define PLATFORM_STACK_SIZE 0x1000
+#endif
+#elif defined(IMAGE_BL31)
+#define PLATFORM_STACK_SIZE 0x1000
+#endif
+
+#define BL2_START NXP_OCRAM_ADDR
+#define BL2_LIMIT (NXP_OCRAM_ADDR + NXP_OCRAM_SIZE)
+#define BL2_NOLOAD_START NXP_OCRAM_ADDR
+#define BL2_NOLOAD_LIMIT BL2_BASE
+
+/* IO defines as needed by IO driver framework */
+#define MAX_IO_DEVICES 4
+#define MAX_IO_BLOCK_DEVICES 1
+#define MAX_IO_HANDLES 4
+
+/*
+ * FIP image defines - Offset at which FIP Image would be present
+ * Image would include Bl31 , Bl33 and Bl32 (optional)
+ */
+#ifdef POLICY_FUSE_PROVISION
+#define MAX_FIP_DEVICES 2
+#endif
+
+#ifndef MAX_FIP_DEVICES
+#define MAX_FIP_DEVICES 1
+#endif
+
+#define BL32_IRQ_SEC_PHY_TIMER 29
+#define BL31_WDOG_SEC 89
+
+/*
+ * ID of the secure physical generic timer interrupt used by the BL32.
+ */
+#define PLAT_LS_G1S_IRQ_PROPS(grp) \
+ INTR_PROP_DESC(BL32_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
+ GIC_INTR_CFG_LEVEL)
+
+/* SGI 15 and Secure watchdog interrupts assigned to Group 0 */
+#define PLAT_LS_G0_IRQ_PROPS(grp) \
+ INTR_PROP_DESC(BL31_WDOG_SEC, GIC_HIGHEST_SEC_PRIORITY, grp, \
+ GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(15, GIC_HIGHEST_SEC_PRIORITY, grp, \
+ GIC_INTR_CFG_LEVEL)
+
+#endif /* PLAT_DEF_H */
diff --git a/plat/nxp/soc-ls1088a/ls1088ardb/platform.c b/plat/nxp/soc-ls1088a/ls1088ardb/platform.c
new file mode 100644
index 0000000..8b3eada
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088ardb/platform.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat_common.h>
+
+#pragma weak board_enable_povdd
+#pragma weak board_disable_povdd
+
+bool board_enable_povdd(void)
+{
+#ifdef CONFIG_POVDD_ENABLE
+ return true;
+#else
+ return false;
+#endif
+}
+
+bool board_disable_povdd(void)
+{
+#ifdef CONFIG_POVDD_ENABLE
+ return true;
+#else
+ return false;
+#endif
+}
diff --git a/plat/nxp/soc-ls1088a/ls1088ardb/platform.mk b/plat/nxp/soc-ls1088a/ls1088ardb/platform.mk
new file mode 100644
index 0000000..6884faf
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088ardb/platform.mk
@@ -0,0 +1,30 @@
+#
+# Copyright 2022 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# board-specific build parameters
+BOOT_MODE ?= qspi
+BOARD := ls1088ardb
+
+# DDR Compilation Configs
+NUM_OF_DDRC := 1
+DDRC_NUM_DIMM := 1
+DDR_ECC_EN := yes
+
+# On-Board Flash Details
+QSPI_FLASH_SZ := 0x4000000
+
+# Adding Platform files build files
+BL2_SOURCES += ${BOARD_PATH}/ddr_init.c \
+ ${BOARD_PATH}/platform.c
+
+SUPPORTED_BOOT_MODE := qspi \
+ sd
+
+# Adding platform board build info
+include plat/nxp/common/plat_make_helper/plat_common_def.mk
+
+# Adding SoC build info
+include plat/nxp/soc-ls1088a/soc.mk
diff --git a/plat/nxp/soc-ls1088a/ls1088ardb/platform_def.h b/plat/nxp/soc-ls1088a/ls1088ardb/platform_def.h
new file mode 100644
index 0000000..7daf1c0
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088ardb/platform_def.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <plat_def.h>
+#include <plat_default_def.h>
+
+#endif /* PLATFORM_DEF_H */
diff --git a/plat/nxp/soc-ls1088a/ls1088ardb/policy.h b/plat/nxp/soc-ls1088a/ls1088ardb/policy.h
new file mode 100644
index 0000000..af206f9
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088ardb/policy.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef POLICY_H
+#define POLICY_H
+
+/* Set this to 0x0 to leave the default SMMU page size in sACR
+ * Set this to 0x1 to change the SMMU page size to 64K
+ */
+#define POLICY_SMMU_PAGESZ_64K 0x1
+
+#endif /* POLICY_H */
diff --git a/plat/nxp/soc-ls1088a/soc.c b/plat/nxp/soc-ls1088a/soc.c
new file mode 100644
index 0000000..5f9f313
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/soc.c
@@ -0,0 +1,397 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch.h>
+#include <caam.h>
+#include <cci.h>
+#include <common/debug.h>
+#include <dcfg.h>
+#ifdef I2C_INIT
+#include <i2c.h>
+#endif
+#include <lib/mmio.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include <ls_interconnect.h>
+#if TRUSTED_BOARD_BOOT
+#include <nxp_smmu.h>
+#endif
+#include <nxp_timer.h>
+#include <plat_console.h>
+#include <plat_gic.h>
+#include <plat_tzc400.h>
+#include <pmu.h>
+#if defined(NXP_SFP_ENABLED)
+#include <sfp.h>
+#endif
+
+#include <errata.h>
+#ifdef CONFIG_OCRAM_ECC_EN
+#include <ocram.h>
+#endif
+#include <plat_common.h>
+#include <platform_def.h>
+#include <soc.h>
+
+static unsigned char _power_domain_tree_desc[NUMBER_OF_CLUSTERS + 2];
+static struct soc_type soc_list[] = {
+ SOC_ENTRY(LS1044A, LS1044A, 1, 4),
+ SOC_ENTRY(LS1044AE, LS1044AE, 1, 4),
+ SOC_ENTRY(LS1048A, LS1048A, 1, 4),
+ SOC_ENTRY(LS1048AE, LS1048AE, 1, 4),
+ SOC_ENTRY(LS1084A, LS1084A, 2, 4),
+ SOC_ENTRY(LS1084AE, LS1084AE, 2, 4),
+ SOC_ENTRY(LS1088A, LS1088A, 2, 4),
+ SOC_ENTRY(LS1088AE, LS1088AE, 2, 4),
+};
+
+static dcfg_init_info_t dcfg_init_data = {
+ .g_nxp_dcfg_addr = NXP_DCFG_ADDR,
+ .nxp_sysclk_freq = NXP_SYSCLK_FREQ,
+ .nxp_ddrclk_freq = NXP_DDRCLK_FREQ,
+ .nxp_plat_clk_divider = NXP_PLATFORM_CLK_DIVIDER,
+};
+
+/*
+ * This function dynamically constructs the topology according to
+ * SoC Flavor and returns it.
+ */
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+ unsigned int i;
+ uint8_t num_clusters, cores_per_cluster;
+
+ get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+ /*
+ * The highest level is the system level. The next level is constituted
+ * by clusters and then cores in clusters.
+ */
+ _power_domain_tree_desc[0] = 1;
+ _power_domain_tree_desc[1] = num_clusters;
+
+ for (i = 0; i < _power_domain_tree_desc[1]; i++) {
+ _power_domain_tree_desc[i + 2] = cores_per_cluster;
+ }
+
+
+ return _power_domain_tree_desc;
+}
+
+CASSERT(NUMBER_OF_CLUSTERS && NUMBER_OF_CLUSTERS <= 256,
+ assert_invalid_ls1088a_cluster_count);
+
+/*
+ * This function returns the core count within the cluster corresponding to
+ * `mpidr`.
+ */
+unsigned int plat_ls_get_cluster_core_count(u_register_t mpidr)
+{
+ return CORES_PER_CLUSTER;
+}
+
+/*
+ * This function returns the total number of cores in the SoC
+ */
+unsigned int get_tot_num_cores(void)
+{
+ uint8_t num_clusters, cores_per_cluster;
+
+ get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+ return (num_clusters * cores_per_cluster);
+}
+
+/*
+ * This function returns the PMU IDLE Cluster mask.
+ */
+unsigned int get_pmu_idle_cluster_mask(void)
+{
+ uint8_t num_clusters, cores_per_cluster;
+
+ get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+ return ((1 << num_clusters) - 2);
+}
+
+/*
+ * This function returns the PMU Flush Cluster mask.
+ */
+unsigned int get_pmu_flush_cluster_mask(void)
+{
+ uint8_t num_clusters, cores_per_cluster;
+
+ get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+ return ((1 << num_clusters) - 2);
+}
+
+/*
+ * This function returns the PMU IDLE Core mask.
+ */
+unsigned int get_pmu_idle_core_mask(void)
+{
+ return ((1 << get_tot_num_cores()) - 2);
+}
+
+#ifdef IMAGE_BL2
+
+void soc_bl2_prepare_exit(void)
+{
+#if defined(NXP_SFP_ENABLED) && defined(DISABLE_FUSE_WRITE)
+ set_sfp_wr_disable();
+#endif
+}
+
+void soc_preload_setup(void)
+{
+
+}
+
+/*
+ * This function returns the boot device based on RCW_SRC
+ */
+enum boot_device get_boot_dev(void)
+{
+ enum boot_device src = BOOT_DEVICE_NONE;
+ uint32_t porsr1;
+ uint32_t rcw_src, val;
+
+ porsr1 = read_reg_porsr1();
+
+ rcw_src = (porsr1 & PORSR1_RCW_MASK) >> PORSR1_RCW_SHIFT;
+
+ /* RCW SRC NOR */
+ val = rcw_src & RCW_SRC_TYPE_MASK;
+ if (val == NOR_16B_VAL) {
+ src = BOOT_DEVICE_IFC_NOR;
+ INFO("RCW BOOT SRC is IFC NOR\n");
+ } else {
+ val = rcw_src & RCW_SRC_SERIAL_MASK;
+ switch (val) {
+ case QSPI_VAL:
+ src = BOOT_DEVICE_QSPI;
+ INFO("RCW BOOT SRC is QSPI\n");
+ break;
+ case SDHC_VAL:
+ src = BOOT_DEVICE_EMMC;
+ INFO("RCW BOOT SRC is SD/EMMC\n");
+ break;
+ case EMMC_VAL:
+ src = BOOT_DEVICE_EMMC;
+ INFO("RCW BOOT SRC is SD/EMMC\n");
+ break;
+ default:
+ src = BOOT_DEVICE_NONE;
+ }
+ }
+
+ return src;
+}
+
+/*
+ * This function sets up access permissions on memory regions
+ */
+void soc_mem_access(void)
+{
+ dram_regions_info_t *info_dram_regions = get_dram_regions_info();
+ int i = 0;
+ struct tzc400_reg tzc400_reg_list[MAX_NUM_TZC_REGION];
+ int dram_idx, index = 1;
+
+ for (dram_idx = 0; dram_idx < info_dram_regions->num_dram_regions;
+ dram_idx++) {
+ if (info_dram_regions->region[i].size == 0) {
+ ERROR("DDR init failure, or");
+ ERROR("DRAM regions not populated correctly.\n");
+ break;
+ }
+
+ index = populate_tzc400_reg_list(tzc400_reg_list,
+ dram_idx, index,
+ info_dram_regions->region[dram_idx].addr,
+ info_dram_regions->region[dram_idx].size,
+ NXP_SECURE_DRAM_SIZE, NXP_SP_SHRD_DRAM_SIZE);
+ }
+
+ mem_access_setup(NXP_TZC_ADDR, index,
+ tzc400_reg_list);
+}
+
+/*
+ * This function implements soc specific erratum
+ * This is called before DDR is initialized or MMU is enabled
+ */
+void soc_early_init(void)
+{
+ enum boot_device dev;
+ dram_regions_info_t *dram_regions_info = get_dram_regions_info();
+
+#ifdef CONFIG_OCRAM_ECC_EN
+ ocram_init(NXP_OCRAM_ADDR, NXP_OCRAM_SIZE);
+#endif
+ dcfg_init(&dcfg_init_data);
+#if LOG_LEVEL > 0
+ /* Initialize the console to provide early debug support */
+ plat_console_init(NXP_CONSOLE_ADDR,
+ NXP_UART_CLK_DIVIDER, NXP_CONSOLE_BAUDRATE);
+#endif
+ enable_timer_base_to_cluster(NXP_PMU_ADDR);
+ enable_core_tb(NXP_PMU_ADDR);
+
+ /*
+ * Use the region(NXP_SD_BLOCK_BUF_ADDR + NXP_SD_BLOCK_BUF_SIZE)
+ * as dma of sd
+ */
+ dev = get_boot_dev();
+ if (dev == BOOT_DEVICE_EMMC) {
+ mmap_add_region(NXP_SD_BLOCK_BUF_ADDR, NXP_SD_BLOCK_BUF_ADDR,
+ NXP_SD_BLOCK_BUF_SIZE,
+ MT_DEVICE | MT_RW | MT_NS);
+ }
+
+#if TRUSTED_BOARD_BOOT
+ uint32_t mode;
+
+ sfp_init(NXP_SFP_ADDR);
+ /*
+ * For secure boot disable SMMU.
+ * Later when platform security policy comes in picture,
+ * this might get modified based on the policy
+ */
+ if (check_boot_mode_secure(&mode) == true) {
+ bypass_smmu(NXP_SMMU_ADDR);
+ }
+
+ /*
+ * For Mbedtls currently crypto is not supported via CAAM
+ * enable it when that support is there. In tbbr.mk
+ * the CAAM_INTEG is set as 0.
+ */
+#ifndef MBEDTLS_X509
+ /* Initialize the crypto accelerator if enabled */
+ if (is_sec_enabled() == false) {
+ INFO("SEC is disabled.\n");
+ } else {
+ sec_init(NXP_CAAM_ADDR);
+ }
+#endif
+#endif
+
+ soc_errata();
+
+ delay_timer_init(NXP_TIMER_ADDR);
+ i2c_init(NXP_I2C_ADDR);
+ dram_regions_info->total_dram_size = init_ddr();
+}
+#else /* !IMAGE_BL2 */
+
+void soc_early_platform_setup2(void)
+{
+ dcfg_init(&dcfg_init_data);
+ /*
+ * Initialize system level generic timer for Socs
+ */
+ delay_timer_init(NXP_TIMER_ADDR);
+
+#if LOG_LEVEL > 0
+ /* Initialize the console to provide early debug support */
+ plat_console_init(NXP_CONSOLE_ADDR,
+ NXP_UART_CLK_DIVIDER, NXP_CONSOLE_BAUDRATE);
+#endif
+}
+
+void soc_platform_setup(void)
+{
+ /* Initialize the GIC driver, cpu and distributor interfaces */
+ static uintptr_t target_mask_array[PLATFORM_CORE_COUNT];
+ static interrupt_prop_t ls_interrupt_props[] = {
+ PLAT_LS_G1S_IRQ_PROPS(INTR_GROUP1S),
+ PLAT_LS_G0_IRQ_PROPS(INTR_GROUP0)
+ };
+
+ plat_ls_gic_driver_init(NXP_GICD_ADDR, NXP_GICR_ADDR,
+ PLATFORM_CORE_COUNT,
+ ls_interrupt_props,
+ ARRAY_SIZE(ls_interrupt_props),
+ target_mask_array,
+ plat_core_pos);
+
+ plat_ls_gic_init();
+ enable_init_timer();
+}
+
+/*
+ * This function initializes the soc from the BL31 module
+ */
+void soc_init(void)
+{
+ uint8_t num_clusters, cores_per_cluster;
+
+ /* low-level init of the soc */
+ soc_init_lowlevel();
+ _init_global_data();
+ soc_init_percpu();
+ _initialize_psci();
+
+ /*
+ * Initialize Interconnect for this cluster during cold boot.
+ * No need for locks as no other CPU is active.
+ */
+ cci_init(NXP_CCI_ADDR, cci_map, ARRAY_SIZE(cci_map));
+
+ /*
+ * Enable Interconnect coherency for the primary CPU's cluster.
+ */
+ get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+ plat_ls_interconnect_enter_coherency(num_clusters);
+
+ /* set platform security policies */
+ _set_platform_security();
+
+ /* Initialize the crypto accelerator if enabled */
+ if (is_sec_enabled() == false) {
+ INFO("SEC is disabled.\n");
+ } else {
+ sec_init(NXP_CAAM_ADDR);
+ }
+}
+
+void soc_runtime_setup(void)
+{
+
+}
+#endif /* IMAGE_BL2 */
+
+/*
+ * Function to return the SoC SYS CLK
+ */
+unsigned int get_sys_clk(void)
+{
+ return NXP_SYSCLK_FREQ;
+}
+
+/*
+ * Function returns the base counter frequency
+ * after reading the first entry at CNTFID0 (0x20 offset).
+ *
+ * Function is used by:
+ * 1. ARM common code for PSCI management.
+ * 2. ARM Generic Timer init.
+ */
+unsigned int plat_get_syscnt_freq2(void)
+{
+ unsigned int counter_base_frequency;
+ /*
+ * Below register specifies the base frequency of the system counter.
+ * As per NXP Board Manuals:
+ * The system counter always works with SYS_REF_CLK/4 frequency clock.
+ */
+ counter_base_frequency = mmio_read_32(NXP_TIMER_ADDR + CNTFID_OFF);
+
+ return counter_base_frequency;
+}
diff --git a/plat/nxp/soc-ls1088a/soc.def b/plat/nxp/soc-ls1088a/soc.def
new file mode 100644
index 0000000..25d0847
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/soc.def
@@ -0,0 +1,87 @@
+#
+# Copyright 2022 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#
+#------------------------------------------------------------------------------
+#
+# This file contains the basic architecture definitions that drive the build
+#
+# -----------------------------------------------------------------------------
+
+CORE_TYPE := a53
+
+CACHE_LINE := 6
+
+# Set to GIC400 or GIC500
+GIC := GIC500
+
+# Set to CCI400 or CCN504 or CCN508
+INTERCONNECT := CCI400
+
+# Select the DDR PHY generation to be used
+PLAT_DDR_PHY := PHY_GEN1
+
+PHYS_SYS := 64
+
+# Indicate layerscape chassis level - set to 3=LSCH3 or 2=LSCH2
+CHASSIS := 3
+
+# TZC IP Details TZC used is TZC380 or TZC400
+TZC_ID := TZC400
+
+# CONSOLE Details available is NS16550 or PL011
+CONSOLE := NS16550
+
+NXP_SFP_VER := 3_4
+
+# In IMAGE_BL2, compile time flag for handling Cache coherency
+# with CAAM for BL2 running from OCRAM
+SEC_MEM_NON_COHERENT := yes
+
+
+# OCRAM MAP for BL2
+# Before BL2
+# 0x18000000 - 0x18009fff -> Used by ROM code, (TBD - can it be used for xlat tables)
+# 0x1800a000 - 0x1801Cfff -> Reserved for BL2 binary (76 KB)
+# 0x1801D000 - 0x1801ffff -> CSF header for BL2 (12 KB)
+OCRAM_START_ADDR := 0x18000000
+OCRAM_SIZE := 0x20000
+
+CSF_HDR_SZ := 0x3000
+
+# Area of OCRAM reserved by ROM code
+NXP_ROM_RSVD := 0xa000
+
+# Input to CST create_hdr_isbc tool
+BL2_HDR_LOC := 0x1801D000
+
+# Location of BL2 on OCRAM
+# BL2_BASE=OCRAM_START_ADDR+NXP_ROM_RSVD
+BL2_BASE := 0x1800a000
+
+# SoC ERRATUM to be enabled
+ERRATA_SOC_A008850 := 1
+
+# ARM Erratum
+ERRATA_A53_855873 := 1
+
+# DDR Erratum
+ERRATA_DDR_A008511 := 1
+ERRATA_DDR_A009803 := 1
+ERRATA_DDR_A009942 := 1
+ERRATA_DDR_A010165 := 1
+
+# Define Endianness of each module
+NXP_ESDHC_ENDIANNESS := LE
+NXP_SFP_ENDIANNESS := LE
+NXP_GPIO_ENDIANNESS := LE
+NXP_SNVS_ENDIANNESS := LE
+NXP_GUR_ENDIANNESS := LE
+NXP_SEC_ENDIANNESS := LE
+NXP_DDR_ENDIANNESS := LE
+NXP_QSPI_ENDIANNESS := LE
+
+# OCRAM ECC Enabled
+OCRAM_ECC_EN := yes
diff --git a/plat/nxp/soc-ls1088a/soc.mk b/plat/nxp/soc-ls1088a/soc.mk
new file mode 100644
index 0000000..83ac9d0
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/soc.mk
@@ -0,0 +1,110 @@
+#
+# Copyright 2022 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# SoC-specific build parameters
+SOC := ls1088a
+PLAT_PATH := plat/nxp
+PLAT_COMMON_PATH:= plat/nxp/common
+PLAT_DRIVERS_PATH:= drivers/nxp
+PLAT_SOC_PATH := ${PLAT_PATH}/soc-${SOC}
+BOARD_PATH := ${PLAT_SOC_PATH}/${BOARD}
+
+# Separate BL2 NOLOAD region (.bss, stack, page tables). need to
+# define BL2_NOLOAD_START and BL2_NOLOAD_LIMIT
+SEPARATE_BL2_NOLOAD_REGION := 1
+
+# get SoC-specific defnitions
+include ${PLAT_SOC_PATH}/soc.def
+include ${PLAT_COMMON_PATH}/plat_make_helper/soc_common_def.mk
+include ${PLAT_COMMON_PATH}/plat_make_helper/plat_build_macros.mk
+
+# For Security Features
+DISABLE_FUSE_WRITE := 1
+ifeq (${TRUSTED_BOARD_BOOT}, 1)
+ifeq (${GENERATE_COT},1)
+# Save Keys to be used by DDR FIP image
+SAVE_KEYS=1
+endif
+$(eval $(call SET_NXP_MAKE_FLAG,SMMU_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,SFP_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,SNVS_NEEDED,BL2))
+# Used by create_pbl tool to
+# create bl2_<boot_mode>_sec.pbl image
+SECURE_BOOT := yes
+endif
+$(eval $(call SET_NXP_MAKE_FLAG,CRYPTO_NEEDED,BL_COMM))
+
+# Selecting Drivers for SoC
+$(eval $(call SET_NXP_MAKE_FLAG,DCFG_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,TIMER_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,INTERCONNECT_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,GIC_NEEDED,BL31))
+$(eval $(call SET_NXP_MAKE_FLAG,CONSOLE_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,PMU_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,DDR_DRIVER_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,TZASC_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,I2C_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,IMG_LOADR_NEEDED,BL2))
+
+# Selecting PSCI & SIP_SVC support
+$(eval $(call SET_NXP_MAKE_FLAG,PSCI_NEEDED,BL31))
+$(eval $(call SET_NXP_MAKE_FLAG,SIPSVC_NEEDED,BL31))
+
+
+# Adding SoC specific files
+include ${PLAT_COMMON_PATH}/soc_errata/errata.mk
+
+PLAT_INCLUDES += -I${PLAT_COMMON_PATH}/include/default\
+ -I${BOARD_PATH}\
+ -I${PLAT_COMMON_PATH}/include/default/ch_${CHASSIS}\
+ -I${PLAT_COMMON_PATH}/soc_errata\
+ -I${PLAT_COMMON_PATH}/include\
+ -I${PLAT_SOC_PATH}/include
+
+ifeq (${SECURE_BOOT},yes)
+include ${PLAT_COMMON_PATH}/tbbr/tbbr.mk
+endif
+
+ifeq (${PSCI_NEEDED}, yes)
+include ${PLAT_COMMON_PATH}/psci/psci.mk
+endif
+
+ifeq (${SIPSVC_NEEDED}, yes)
+include ${PLAT_COMMON_PATH}/sip_svc/sipsvc.mk
+endif
+
+# for fuse-fip & fuse-programming
+ifeq (${FUSE_PROG}, 1)
+include ${PLAT_COMMON_PATH}/fip_handler/fuse_fip/fuse.mk
+endif
+
+ifeq (${IMG_LOADR_NEEDED},yes)
+include $(PLAT_COMMON_PATH)/img_loadr/img_loadr.mk
+endif
+
+# Adding source files for the above selected drivers.
+include ${PLAT_DRIVERS_PATH}/drivers.mk
+
+PLAT_BL_COMMON_SOURCES += ${PLAT_COMMON_PATH}/$(ARCH)/ls_helpers.S\
+ ${PLAT_SOC_PATH}/${ARCH}/${SOC}_helpers.S\
+ ${PLAT_SOC_PATH}/soc.c
+
+BL31_SOURCES += ${PLAT_SOC_PATH}/$(ARCH)/${SOC}.S\
+ ${PSCI_SOURCES}\
+ ${SIPSVC_SOURCES}\
+ ${PLAT_COMMON_PATH}/$(ARCH)/bl31_data.S
+
+ifeq (${TEST_BL31}, 1)
+BL31_SOURCES += ${PLAT_SOC_PATH}/$(ARCH)/bootmain64.S \
+ ${PLAT_SOC_PATH}/$(ARCH)/nonboot64.S
+endif
+
+BL2_SOURCES += ${DDR_CNTLR_SOURCES}\
+ ${TBBR_SOURCES}\
+ ${FUSE_SOURCES}
+
+# Adding TFA setup files
+include ${PLAT_PATH}/common/setup/common.mk
diff --git a/plat/nxp/soc-lx2160a/soc.def b/plat/nxp/soc-lx2160a/soc.def
index 24d1d13..81d6744 100644
--- a/plat/nxp/soc-lx2160a/soc.def
+++ b/plat/nxp/soc-lx2160a/soc.def
@@ -1,6 +1,6 @@
#
# Copyright (c) 2015, 2016 Freescale Semiconductor, Inc.
-# Copyright 2017-2020 NXP Semiconductors
+# Copyright 2017-2022 NXP Semiconductors
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -107,5 +107,10 @@
# SoC Errata
ERRATA_SOC_A050426 := 1
+# DDR Errata
+ERRATA_DDR_A011396 := 1
+ERRATA_DDR_A050450 := 1
+ERRATA_DDR_A050958 := 1
+
# enable dynamic memory mapping
PLAT_XLAT_TABLES_DYNAMIC := 1
diff --git a/tools/nxp/create_pbl/create_pbl.c b/tools/nxp/create_pbl/create_pbl.c
index 244b0fb..9457a00 100644
--- a/tools/nxp/create_pbl/create_pbl.c
+++ b/tools/nxp/create_pbl/create_pbl.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2021 NXP
+ * Copyright 2021-2022 NXP
*
* SPDX-License-Identifier: BSD-3-Clause
*
@@ -507,7 +507,9 @@
}
}
- printf("\nBoot Location Pointer= %x\n", BYTE_SWAP_32(pblimg.ep));
+ printf("\nBoot Location Pointer= 0x%x\n",
+ pblimg.chassis == CHASSIS_2 ? BYTE_SWAP_32(pblimg.ep) :
+ pblimg.ep);
ret = SUCCESS;
bootptr_err:
diff --git a/tools/nxp/create_pbl/pbl_ch3.mk b/tools/nxp/create_pbl/pbl_ch3.mk
index e9dbfb0..9283474 100644
--- a/tools/nxp/create_pbl/pbl_ch3.mk
+++ b/tools/nxp/create_pbl/pbl_ch3.mk
@@ -1,5 +1,5 @@
#
-# Copyright 2018-2020 NXP
+# Copyright 2018-2022 NXP
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -63,7 +63,7 @@
-o ${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl -f ${BL2_SRC_OFFSET};
# Append the bl2.bin to the RCW image
- @echo "bl2_loc is ${bl2_offset}"
+ @echo "bl2_loc is ${bl2_loc} KB"
dd if=${BUILD_PLAT}/bl2.bin of=${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl bs=1K seek=${bl2_loc}
cd ${CREATE_PBL_TOOL_PATH}; ${MAKE} clean ; cd -;