diff --git a/drivers/marvell/mg_conf_cm3/mg_conf_cm3.c b/drivers/marvell/mg_conf_cm3/mg_conf_cm3.c
index e249b5b..0efa30e 100644
--- a/drivers/marvell/mg_conf_cm3/mg_conf_cm3.c
+++ b/drivers/marvell/mg_conf_cm3/mg_conf_cm3.c
@@ -8,15 +8,41 @@
 #include <a8k_plat_def.h>
 #include <common/debug.h>
 #include <lib/mmio.h>
-#include <mvebu.h>
+#include <mss_scp_bl2_format.h>
 
 /* CONFI REGISTERS */
 #define MG_CM3_CONFI_BASE(CP)		(MVEBU_CP_REGS_BASE(CP) + 0x100000)
+#define MG_CM3_SRAM_BASE(CP)		MG_CM3_CONFI_BASE(CP)
 #define MG_CM3_CONFI_GLOB_CFG_REG(CP)	(MG_CM3_CONFI_BASE(CP) + 0x2B500)
 #define CM3_CPU_EN_BIT			BIT(28)
 #define MG_CM3_MG_INT_MFX_REG(CP)	(MG_CM3_CONFI_BASE(CP) + 0x2B054)
 #define CM3_SYS_RESET_BIT		BIT(0)
 
+#define MG_SRAM_SIZE	0x20000 /* 128KB */
+
+int mg_image_load(uintptr_t src_addr, uint32_t size, int cp_index)
+{
+	uintptr_t mg_regs = MG_CM3_SRAM_BASE(cp_index);
+
+	if (size > MG_SRAM_SIZE) {
+		ERROR("image is too big to fit into MG CM3 memory\n");
+		return 1;
+	}
+
+	NOTICE("Loading MG image from address 0x%lx Size 0x%x to MG at 0x%lx\n",
+	       src_addr, size, mg_regs);
+
+	/* Copy image to MG CM3 SRAM */
+	memcpy((void *)mg_regs, (void *)src_addr, size);
+
+	/* Don't release MG CM3 from reset - it will be done by next step
+	 * bootloader (e.g. U-Boot), when appriopriate device-tree setup (which
+	 * has enabeld 802.3. auto-neg) will be choosen.
+	 */
+
+	return 0;
+}
+
 void mg_start_ap_fw(int cp_nr)
 {
 	if (mmio_read_32(MG_CM3_CONFI_GLOB_CFG_REG(cp_nr)) & CM3_CPU_EN_BIT) {
diff --git a/drivers/marvell/mg_conf_cm3/mg_conf_cm3.h b/drivers/marvell/mg_conf_cm3/mg_conf_cm3.h
index 44c7b69..8dfaa32 100644
--- a/drivers/marvell/mg_conf_cm3/mg_conf_cm3.h
+++ b/drivers/marvell/mg_conf_cm3/mg_conf_cm3.h
@@ -6,3 +6,4 @@
  */
 
 void mg_start_ap_fw(int cp_nr);
+int mg_image_load(uintptr_t src_addr, uint32_t size, int cp_index);