diff --git a/include/lib/xlat_tables/aarch32/xlat_tables_aarch32.h b/include/lib/xlat_tables/aarch32/xlat_tables_aarch32.h
index a333d1e..30eb5e9 100644
--- a/include/lib/xlat_tables/aarch32/xlat_tables_aarch32.h
+++ b/include/lib/xlat_tables/aarch32/xlat_tables_aarch32.h
@@ -63,8 +63,7 @@
  * is 1.
  *
  * Note that this macro assumes that the given virtual address space size is
- * valid. Therefore, the caller is expected to check it is the case using the
- * CHECK_VIRT_ADDR_SPACE_SIZE() macro first.
+ * valid.
  */
 #define GET_XLAT_TABLE_LEVEL_BASE(_virt_addr_space_sz)			\
 	(((_virt_addr_space_sz) > (ULL(1) << L1_XLAT_ADDRESS_SHIFT)) ?	\
diff --git a/include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h b/include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h
index cc5624c..3014c8f 100644
--- a/include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h
+++ b/include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h
@@ -43,14 +43,22 @@
  * state.
  *
  * TCR.TxSZ is calculated as 64 minus the width of said address space.
- * The value of TCR.TxSZ must be in the range 16 to 39 [1], which means that
- * the virtual address space width must be in the range 48 to 25 bits.
+ * The value of TCR.TxSZ must be in the range 16 to 39 [1] or 48 [2],
+ * depending on Small Translation Table Support which means that
+ * the virtual address space width must be in the range 48 to 25 or 16 bits.
  *
  * [1] See the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
  * information:
  * Page 1730: 'Input address size', 'For all translation stages'.
+ * [2] See section 12.2.55 in the ARMv8-A Architecture Reference Manual
+ * (DDI 0487D.a)
  */
+/* Maximum value of TCR_ELx.T(0,1)SZ is 39 */
 #define MIN_VIRT_ADDR_SPACE_SIZE	(ULL(1) << (U(64) - TCR_TxSZ_MAX))
+
+/* Maximum value of TCR_ELx.T(0,1)SZ is 48 */
+#define MIN_VIRT_ADDR_SPACE_SIZE_TTST	\
+				(ULL(1) << (U(64) - TCR_TxSZ_MAX_TTST))
 #define MAX_VIRT_ADDR_SPACE_SIZE	(ULL(1) << (U(64) - TCR_TxSZ_MIN))
 
 /*
@@ -58,9 +66,13 @@
  * virtual address space size. For a 4 KB page size,
  * - level 0 supports virtual address spaces of widths 48 to 40 bits;
  * - level 1 from 39 to 31;
- * - level 2 from 30 to 25.
+ * - level 2 from 30 to 22.
+ * - level 3 from 21 to 16.
  *
- * Wider or narrower address spaces are not supported. As a result, level 3
+ * Small Translation Table (Armv8.4-TTST) support allows the starting level
+ * of the translation table from 3 for 4KB granularity. See section 12.2.55 in
+ * the ARMv8-A Architecture Reference Manual (DDI 0487D.a). In Armv8.3 and below
+ * wider or narrower address spaces are not supported. As a result, level 3
  * cannot be used as initial lookup level with 4 KB granularity. See section
  * D4.2.5 in the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
  * information.
@@ -71,13 +83,14 @@
  * is 1.
  *
  * Note that this macro assumes that the given virtual address space size is
- * valid. Therefore, the caller is expected to check it is the case using the
- * CHECK_VIRT_ADDR_SPACE_SIZE() macro first.
+ * valid.
  */
 #define GET_XLAT_TABLE_LEVEL_BASE(_virt_addr_space_sz)		\
 	(((_virt_addr_space_sz) > (ULL(1) << L0_XLAT_ADDRESS_SHIFT))	\
 	? 0U								\
-	 : (((_virt_addr_space_sz) > (ULL(1) << L1_XLAT_ADDRESS_SHIFT))	\
-	 ? 1U : 2U))
+	: (((_virt_addr_space_sz) > (ULL(1) << L1_XLAT_ADDRESS_SHIFT))	\
+	? 1U								\
+	: (((_virt_addr_space_sz) > (ULL(1) << L2_XLAT_ADDRESS_SHIFT))	\
+	? 2U : 3U)))
 
 #endif /* XLAT_TABLES_AARCH64_H */
diff --git a/include/lib/xlat_tables/xlat_tables_arch.h b/include/lib/xlat_tables/xlat_tables_arch.h
index 251b020..7237534 100644
--- a/include/lib/xlat_tables/xlat_tables_arch.h
+++ b/include/lib/xlat_tables/xlat_tables_arch.h
@@ -14,18 +14,6 @@
 #endif
 
 /*
- * Evaluates to 1 if the given virtual address space size is valid, or 0 if it's
- * not.
- *
- * A valid size is one that is a power of 2 and is within the architectural
- * limits. Not that these limits are different for AArch32 and AArch64.
- */
-#define CHECK_VIRT_ADDR_SPACE_SIZE(size)			\
-	(((unsigned long long)(size) >= MIN_VIRT_ADDR_SPACE_SIZE) &&	\
-	((unsigned long long)(size) <= MAX_VIRT_ADDR_SPACE_SIZE) &&	\
-	IS_POWER_OF_TWO(size))
-
-/*
  * Evaluates to 1 if the given physical address space size is a power of 2,
  * or 0 if it's not.
  */
diff --git a/include/lib/xlat_tables/xlat_tables_v2_helpers.h b/include/lib/xlat_tables/xlat_tables_v2_helpers.h
index ce5cf82..6a1be32 100644
--- a/include/lib/xlat_tables/xlat_tables_v2_helpers.h
+++ b/include/lib/xlat_tables/xlat_tables_v2_helpers.h
@@ -125,9 +125,6 @@
 #define REGISTER_XLAT_CONTEXT_FULL_SPEC(_ctx_name, _mmap_count,		\
 			_xlat_tables_count, _virt_addr_space_size,	\
 			_phy_addr_space_size, _xlat_regime, _section_name)\
-	CASSERT(CHECK_VIRT_ADDR_SPACE_SIZE(_virt_addr_space_size),	\
-		assert_invalid_virtual_addr_space_size_for_##_ctx_name);\
-									\
 	CASSERT(CHECK_PHY_ADDR_SPACE_SIZE(_phy_addr_space_size),	\
 		assert_invalid_physical_addr_space_sizefor_##_ctx_name);\
 									\