diff --git a/docs/plat/imx8.rst b/docs/plat/imx8.rst
new file mode 100644
index 0000000..a56d0f1
--- /dev/null
+++ b/docs/plat/imx8.rst
@@ -0,0 +1,54 @@
+Description
+===========
+
+The i.MX 8 series of applications processors is a feature- and
+performance-scalable multi-core platform that includes single-,
+dual-, and quad-core families based on the Arm® Cortex®
+architecture—including combined Cortex-A72 + Cortex-A53,
+Cortex-A35, and Cortex-M4 based solutions for advanced graphics,
+imaging, machine vision, audio, voice, video, and safety-critical
+applications.
+
+The i.MX8QX is with 4 Cortex-A35 ARM core and 1 Cortex-M4 system
+controller.
+
+The System Controller (SC) represents the evolution of centralized
+control for system-level resources on i.MX8. The heart of the system
+controller is a Cortex-M4 that executes system controller firmware.
+
+Boot Sequence
+=============
+
+Bootrom --> BL31 --> BL33(u-boot) --> Linux kernel
+
+How to build
+============
+
+Build Procedure
+---------------
+
+-  Prepare AARCH64 toolchain.
+
+-  Build System Controller Firmware and u-boot firstly, and get binary images: scfw_tcm.bin and u-boot.bin
+
+-  Build TF-A
+
+   Build bl31:
+
+   .. code:: shell
+
+       CROSS_COMPILE=aarch64-linux-gnu- make PLAT=<Target_SoC> bl31
+
+   Target_SoC should be "imx8qx" for i.MX8QX SoC.
+
+Deploy TF-A Images
+-----------------
+
+TF-A binary(bl31.bin), scfw_tcm.bin and u-boot.bin are combined together
+to generate a binary file called flash.bin, the imx-mkimage tool is used
+to generate flash.bin, and flash.bin needs to be flashed into SD card
+with certain offset for BOOT ROM. The system controller firmware,
+u-boot and imx-mkimage will be upstreamed soon, this doc will be updated
+once they are ready, and the link will be posted.
+
+.. _i.MX8: https://www.nxp.com/products/processors-and-microcontrollers/applications-processors/i.mx-applications-processors/i.mx-8-processors/i.mx-8-family-arm-cortex-a53-cortex-a72-virtualization-vision-3d-graphics-4k-video:i.MX8
diff --git a/maintainers.rst b/maintainers.rst
index 2217cbe..195f1f3 100644
--- a/maintainers.rst
+++ b/maintainers.rst
@@ -92,6 +92,16 @@
 -  docs/plat/ls1043a.rst
 -  plat/layerscape/\*
 
+NXP i.MX 8 platform sub-maintainer
+--------------------------------------
+
+Anson Huang (Anson.Huang@nxp.com, `Anson-Huang`_)
+
+Files:
+
+-  docs/plat/imx8.rst
+-  plat/imx/\*
+
 Raspberry Pi 3 platform sub-maintainer
 --------------------------------------
 
diff --git a/plat/imx/common/include/imx8qx_pads.h b/plat/imx/common/include/imx8qx_pads.h
new file mode 100644
index 0000000..0e153bb
--- /dev/null
+++ b/plat/imx/common/include/imx8qx_pads.h
@@ -0,0 +1,198 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*!
+ * Header file used to configure SoC pad list.
+ */
+
+#ifndef SC_PADS_H
+#define SC_PADS_H
+
+/* Includes */
+
+/* Defines */
+
+/*!
+ * @name Pad Definitions
+ */
+/*@{*/
+#define SC_P_PCIE_CTRL0_PERST_B                  0	/* HSIO.PCIE0.PERST_B, LSIO.GPIO4.IO00 */
+#define SC_P_PCIE_CTRL0_CLKREQ_B                 1	/* HSIO.PCIE0.CLKREQ_B, LSIO.GPIO4.IO01 */
+#define SC_P_PCIE_CTRL0_WAKE_B                   2	/* HSIO.PCIE0.WAKE_B, LSIO.GPIO4.IO02 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_PCIESEP       3	/*  */
+#define SC_P_USB_SS3_TC0                         4	/* ADMA.I2C1.SCL, CONN.USB_OTG1.PWR, CONN.USB_OTG2.PWR, LSIO.GPIO4.IO03 */
+#define SC_P_USB_SS3_TC1                         5	/* ADMA.I2C1.SCL, CONN.USB_OTG2.PWR, LSIO.GPIO4.IO04 */
+#define SC_P_USB_SS3_TC2                         6	/* ADMA.I2C1.SDA, CONN.USB_OTG1.OC, CONN.USB_OTG2.OC, LSIO.GPIO4.IO05 */
+#define SC_P_USB_SS3_TC3                         7	/* ADMA.I2C1.SDA, CONN.USB_OTG2.OC, LSIO.GPIO4.IO06 */
+#define SC_P_COMP_CTL_GPIO_3V3_USB3IO            8	/*  */
+#define SC_P_EMMC0_CLK                           9	/* CONN.EMMC0.CLK, CONN.NAND.READY_B, LSIO.GPIO4.IO07 */
+#define SC_P_EMMC0_CMD                           10	/* CONN.EMMC0.CMD, CONN.NAND.DQS, LSIO.GPIO4.IO08 */
+#define SC_P_EMMC0_DATA0                         11	/* CONN.EMMC0.DATA0, CONN.NAND.DATA00, LSIO.GPIO4.IO09 */
+#define SC_P_EMMC0_DATA1                         12	/* CONN.EMMC0.DATA1, CONN.NAND.DATA01, LSIO.GPIO4.IO10 */
+#define SC_P_EMMC0_DATA2                         13	/* CONN.EMMC0.DATA2, CONN.NAND.DATA02, LSIO.GPIO4.IO11 */
+#define SC_P_EMMC0_DATA3                         14	/* CONN.EMMC0.DATA3, CONN.NAND.DATA03, LSIO.GPIO4.IO12 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_SD1FIX0       15	/*  */
+#define SC_P_EMMC0_DATA4                         16	/* CONN.EMMC0.DATA4, CONN.NAND.DATA04, CONN.EMMC0.WP, LSIO.GPIO4.IO13 */
+#define SC_P_EMMC0_DATA5                         17	/* CONN.EMMC0.DATA5, CONN.NAND.DATA05, CONN.EMMC0.VSELECT, LSIO.GPIO4.IO14 */
+#define SC_P_EMMC0_DATA6                         18	/* CONN.EMMC0.DATA6, CONN.NAND.DATA06, CONN.MLB.CLK, LSIO.GPIO4.IO15 */
+#define SC_P_EMMC0_DATA7                         19	/* CONN.EMMC0.DATA7, CONN.NAND.DATA07, CONN.MLB.SIG, LSIO.GPIO4.IO16 */
+#define SC_P_EMMC0_STROBE                        20	/* CONN.EMMC0.STROBE, CONN.NAND.CLE, CONN.MLB.DATA, LSIO.GPIO4.IO17 */
+#define SC_P_EMMC0_RESET_B                       21	/* CONN.EMMC0.RESET_B, CONN.NAND.WP_B, LSIO.GPIO4.IO18 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_SD1FIX1       22	/*  */
+#define SC_P_USDHC1_RESET_B                      23	/* CONN.USDHC1.RESET_B, CONN.NAND.RE_N, ADMA.SPI2.SCK, LSIO.GPIO4.IO19 */
+#define SC_P_USDHC1_VSELECT                      24	/* CONN.USDHC1.VSELECT, CONN.NAND.RE_P, ADMA.SPI2.SDO, CONN.NAND.RE_B, LSIO.GPIO4.IO20 */
+#define SC_P_CTL_NAND_RE_P_N                     25	/*  */
+#define SC_P_USDHC1_WP                           26	/* CONN.USDHC1.WP, CONN.NAND.DQS_N, ADMA.SPI2.SDI, LSIO.GPIO4.IO21 */
+#define SC_P_USDHC1_CD_B                         27	/* CONN.USDHC1.CD_B, CONN.NAND.DQS_P, ADMA.SPI2.CS0, CONN.NAND.DQS, LSIO.GPIO4.IO22 */
+#define SC_P_CTL_NAND_DQS_P_N                    28	/*  */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_VSELSEP       29	/*  */
+#define SC_P_USDHC1_CLK                          30	/* CONN.USDHC1.CLK, ADMA.UART3.RX, LSIO.GPIO4.IO23 */
+#define SC_P_USDHC1_CMD                          31	/* CONN.USDHC1.CMD, CONN.NAND.CE0_B, ADMA.MQS.R, LSIO.GPIO4.IO24 */
+#define SC_P_USDHC1_DATA0                        32	/* CONN.USDHC1.DATA0, CONN.NAND.CE1_B, ADMA.MQS.L, LSIO.GPIO4.IO25 */
+#define SC_P_USDHC1_DATA1                        33	/* CONN.USDHC1.DATA1, CONN.NAND.RE_B, ADMA.UART3.TX, LSIO.GPIO4.IO26 */
+#define SC_P_USDHC1_DATA2                        34	/* CONN.USDHC1.DATA2, CONN.NAND.WE_B, ADMA.UART3.CTS_B, LSIO.GPIO4.IO27 */
+#define SC_P_USDHC1_DATA3                        35	/* CONN.USDHC1.DATA3, CONN.NAND.ALE, ADMA.UART3.RTS_B, LSIO.GPIO4.IO28 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_VSEL3         36	/*  */
+#define SC_P_ENET0_RGMII_TXC                     37	/* CONN.ENET0.RGMII_TXC, CONN.ENET0.RCLK50M_OUT, CONN.ENET0.RCLK50M_IN, CONN.NAND.CE1_B, LSIO.GPIO4.IO29 */
+#define SC_P_ENET0_RGMII_TX_CTL                  38	/* CONN.ENET0.RGMII_TX_CTL, CONN.USDHC1.RESET_B, LSIO.GPIO4.IO30 */
+#define SC_P_ENET0_RGMII_TXD0                    39	/* CONN.ENET0.RGMII_TXD0, CONN.USDHC1.VSELECT, LSIO.GPIO4.IO31 */
+#define SC_P_ENET0_RGMII_TXD1                    40	/* CONN.ENET0.RGMII_TXD1, CONN.USDHC1.WP, LSIO.GPIO5.IO00 */
+#define SC_P_ENET0_RGMII_TXD2                    41	/* CONN.ENET0.RGMII_TXD2, CONN.MLB.CLK, CONN.NAND.CE0_B, CONN.USDHC1.CD_B, LSIO.GPIO5.IO01 */
+#define SC_P_ENET0_RGMII_TXD3                    42	/* CONN.ENET0.RGMII_TXD3, CONN.MLB.SIG, CONN.NAND.RE_B, LSIO.GPIO5.IO02 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0   43	/*  */
+#define SC_P_ENET0_RGMII_RXC                     44	/* CONN.ENET0.RGMII_RXC, CONN.MLB.DATA, CONN.NAND.WE_B, CONN.USDHC1.CLK, LSIO.GPIO5.IO03 */
+#define SC_P_ENET0_RGMII_RX_CTL                  45	/* CONN.ENET0.RGMII_RX_CTL, CONN.USDHC1.CMD, LSIO.GPIO5.IO04 */
+#define SC_P_ENET0_RGMII_RXD0                    46	/* CONN.ENET0.RGMII_RXD0, CONN.USDHC1.DATA0, LSIO.GPIO5.IO05 */
+#define SC_P_ENET0_RGMII_RXD1                    47	/* CONN.ENET0.RGMII_RXD1, CONN.USDHC1.DATA1, LSIO.GPIO5.IO06 */
+#define SC_P_ENET0_RGMII_RXD2                    48	/* CONN.ENET0.RGMII_RXD2, CONN.ENET0.RMII_RX_ER, CONN.USDHC1.DATA2, LSIO.GPIO5.IO07 */
+#define SC_P_ENET0_RGMII_RXD3                    49	/* CONN.ENET0.RGMII_RXD3, CONN.NAND.ALE, CONN.USDHC1.DATA3, LSIO.GPIO5.IO08 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1   50	/*  */
+#define SC_P_ENET0_REFCLK_125M_25M               51	/* CONN.ENET0.REFCLK_125M_25M, CONN.ENET0.PPS, CONN.ENET1.PPS, LSIO.GPIO5.IO09 */
+#define SC_P_ENET0_MDIO                          52	/* CONN.ENET0.MDIO, ADMA.I2C3.SDA, CONN.ENET1.MDIO, LSIO.GPIO5.IO10 */
+#define SC_P_ENET0_MDC                           53	/* CONN.ENET0.MDC, ADMA.I2C3.SCL, CONN.ENET1.MDC, LSIO.GPIO5.IO11 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIOCT        54	/*  */
+#define SC_P_ESAI0_FSR                           55	/* ADMA.ESAI0.FSR, CONN.ENET1.RCLK50M_OUT, ADMA.LCDIF.D00, CONN.ENET1.RGMII_TXC, CONN.ENET1.RCLK50M_IN */
+#define SC_P_ESAI0_FST                           56	/* ADMA.ESAI0.FST, CONN.MLB.CLK, ADMA.LCDIF.D01, CONN.ENET1.RGMII_TXD2, LSIO.GPIO0.IO01 */
+#define SC_P_ESAI0_SCKR                          57	/* ADMA.ESAI0.SCKR, ADMA.LCDIF.D02, CONN.ENET1.RGMII_TX_CTL, LSIO.GPIO0.IO02 */
+#define SC_P_ESAI0_SCKT                          58	/* ADMA.ESAI0.SCKT, CONN.MLB.SIG, ADMA.LCDIF.D03, CONN.ENET1.RGMII_TXD3, LSIO.GPIO0.IO03 */
+#define SC_P_ESAI0_TX0                           59	/* ADMA.ESAI0.TX0, CONN.MLB.DATA, ADMA.LCDIF.D04, CONN.ENET1.RGMII_RXC, LSIO.GPIO0.IO04 */
+#define SC_P_ESAI0_TX1                           60	/* ADMA.ESAI0.TX1, ADMA.LCDIF.D05, CONN.ENET1.RGMII_RXD3, LSIO.GPIO0.IO05 */
+#define SC_P_ESAI0_TX2_RX3                       61	/* ADMA.ESAI0.TX2_RX3, CONN.ENET1.RMII_RX_ER, ADMA.LCDIF.D06, CONN.ENET1.RGMII_RXD2, LSIO.GPIO0.IO06 */
+#define SC_P_ESAI0_TX3_RX2                       62	/* ADMA.ESAI0.TX3_RX2, ADMA.LCDIF.D07, CONN.ENET1.RGMII_RXD1, LSIO.GPIO0.IO07 */
+#define SC_P_ESAI0_TX4_RX1                       63	/* ADMA.ESAI0.TX4_RX1, ADMA.LCDIF.D08, CONN.ENET1.RGMII_TXD0, LSIO.GPIO0.IO08 */
+#define SC_P_ESAI0_TX5_RX0                       64	/* ADMA.ESAI0.TX5_RX0, ADMA.LCDIF.D09, CONN.ENET1.RGMII_TXD1, LSIO.GPIO0.IO09 */
+#define SC_P_SPDIF0_RX                           65	/* ADMA.SPDIF0.RX, ADMA.MQS.R, ADMA.LCDIF.D10, CONN.ENET1.RGMII_RXD0, LSIO.GPIO0.IO10 */
+#define SC_P_SPDIF0_TX                           66	/* ADMA.SPDIF0.TX, ADMA.MQS.L, ADMA.LCDIF.D11, CONN.ENET1.RGMII_RX_CTL, LSIO.GPIO0.IO11 */
+#define SC_P_SPDIF0_EXT_CLK                      67	/* ADMA.SPDIF0.EXT_CLK, ADMA.LCDIF.D12, CONN.ENET1.REFCLK_125M_25M, LSIO.GPIO0.IO12 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB       68	/*  */
+#define SC_P_SPI3_SCK                            69	/* ADMA.SPI3.SCK, ADMA.LCDIF.D13, LSIO.GPIO0.IO13 */
+#define SC_P_SPI3_SDO                            70	/* ADMA.SPI3.SDO, ADMA.LCDIF.D14, LSIO.GPIO0.IO14 */
+#define SC_P_SPI3_SDI                            71	/* ADMA.SPI3.SDI, ADMA.LCDIF.D15, LSIO.GPIO0.IO15 */
+#define SC_P_SPI3_CS0                            72	/* ADMA.SPI3.CS0, ADMA.ACM.MCLK_OUT1, ADMA.LCDIF.HSYNC, LSIO.GPIO0.IO16 */
+#define SC_P_SPI3_CS1                            73	/* ADMA.SPI3.CS1, ADMA.I2C3.SCL, ADMA.LCDIF.RESET, ADMA.SPI2.CS0, ADMA.LCDIF.D16 */
+#define SC_P_MCLK_IN1                            74	/* ADMA.ACM.MCLK_IN1, ADMA.I2C3.SDA, ADMA.LCDIF.EN, ADMA.SPI2.SCK, ADMA.LCDIF.D17 */
+#define SC_P_MCLK_IN0                            75	/* ADMA.ACM.MCLK_IN0, ADMA.ESAI0.RX_HF_CLK, ADMA.LCDIF.VSYNC, ADMA.SPI2.SDI, LSIO.GPIO0.IO19 */
+#define SC_P_MCLK_OUT0                           76	/* ADMA.ACM.MCLK_OUT0, ADMA.ESAI0.TX_HF_CLK, ADMA.LCDIF.CLK, ADMA.SPI2.SDO, LSIO.GPIO0.IO20 */
+#define SC_P_UART1_TX                            77	/* ADMA.UART1.TX, LSIO.PWM0.OUT, LSIO.GPT0.CAPTURE, LSIO.GPIO0.IO21 */
+#define SC_P_UART1_RX                            78	/* ADMA.UART1.RX, LSIO.PWM1.OUT, LSIO.GPT0.COMPARE, LSIO.GPT1.CLK, LSIO.GPIO0.IO22 */
+#define SC_P_UART1_RTS_B                         79	/* ADMA.UART1.RTS_B, LSIO.PWM2.OUT, ADMA.LCDIF.D16, LSIO.GPT1.CAPTURE, LSIO.GPT0.CLK */
+#define SC_P_UART1_CTS_B                         80	/* ADMA.UART1.CTS_B, LSIO.PWM3.OUT, ADMA.LCDIF.D17, LSIO.GPT1.COMPARE, LSIO.GPIO0.IO24 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHK       81	/*  */
+#define SC_P_SAI0_TXD                            82	/* ADMA.SAI0.TXD, ADMA.SAI1.RXC, ADMA.SPI1.SDO, ADMA.LCDIF.D18, LSIO.GPIO0.IO25 */
+#define SC_P_SAI0_TXC                            83	/* ADMA.SAI0.TXC, ADMA.SAI1.TXD, ADMA.SPI1.SDI, ADMA.LCDIF.D19, LSIO.GPIO0.IO26 */
+#define SC_P_SAI0_RXD                            84	/* ADMA.SAI0.RXD, ADMA.SAI1.RXFS, ADMA.SPI1.CS0, ADMA.LCDIF.D20, LSIO.GPIO0.IO27 */
+#define SC_P_SAI0_TXFS                           85	/* ADMA.SAI0.TXFS, ADMA.SPI2.CS1, ADMA.SPI1.SCK, LSIO.GPIO0.IO28 */
+#define SC_P_SAI1_RXD                            86	/* ADMA.SAI1.RXD, ADMA.SAI0.RXFS, ADMA.SPI1.CS1, ADMA.LCDIF.D21, LSIO.GPIO0.IO29 */
+#define SC_P_SAI1_RXC                            87	/* ADMA.SAI1.RXC, ADMA.SAI1.TXC, ADMA.LCDIF.D22, LSIO.GPIO0.IO30 */
+#define SC_P_SAI1_RXFS                           88	/* ADMA.SAI1.RXFS, ADMA.SAI1.TXFS, ADMA.LCDIF.D23, LSIO.GPIO0.IO31 */
+#define SC_P_SPI2_CS0                            89	/* ADMA.SPI2.CS0, LSIO.GPIO1.IO00 */
+#define SC_P_SPI2_SDO                            90	/* ADMA.SPI2.SDO, LSIO.GPIO1.IO01 */
+#define SC_P_SPI2_SDI                            91	/* ADMA.SPI2.SDI, LSIO.GPIO1.IO02 */
+#define SC_P_SPI2_SCK                            92	/* ADMA.SPI2.SCK, LSIO.GPIO1.IO03 */
+#define SC_P_SPI0_SCK                            93	/* ADMA.SPI0.SCK, ADMA.SAI0.TXC, M40.I2C0.SCL, M40.GPIO0.IO00, LSIO.GPIO1.IO04 */
+#define SC_P_SPI0_SDI                            94	/* ADMA.SPI0.SDI, ADMA.SAI0.TXD, M40.TPM0.CH0, M40.GPIO0.IO02, LSIO.GPIO1.IO05 */
+#define SC_P_SPI0_SDO                            95	/* ADMA.SPI0.SDO, ADMA.SAI0.TXFS, M40.I2C0.SDA, M40.GPIO0.IO01, LSIO.GPIO1.IO06 */
+#define SC_P_SPI0_CS1                            96	/* ADMA.SPI0.CS1, ADMA.SAI0.RXC, ADMA.SAI1.TXD, ADMA.LCD_PWM0.OUT, LSIO.GPIO1.IO07 */
+#define SC_P_SPI0_CS0                            97	/* ADMA.SPI0.CS0, ADMA.SAI0.RXD, M40.TPM0.CH1, M40.GPIO0.IO03, LSIO.GPIO1.IO08 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHT       98	/*  */
+#define SC_P_ADC_IN1                             99	/* ADMA.ADC.IN1, M40.I2C0.SDA, M40.GPIO0.IO01, LSIO.GPIO1.IO09 */
+#define SC_P_ADC_IN0                             100	/* ADMA.ADC.IN0, M40.I2C0.SCL, M40.GPIO0.IO00, LSIO.GPIO1.IO10 */
+#define SC_P_ADC_IN3                             101	/* ADMA.ADC.IN3, M40.UART0.TX, M40.GPIO0.IO03, ADMA.ACM.MCLK_OUT0, LSIO.GPIO1.IO11 */
+#define SC_P_ADC_IN2                             102	/* ADMA.ADC.IN2, M40.UART0.RX, M40.GPIO0.IO02, ADMA.ACM.MCLK_IN0, LSIO.GPIO1.IO12 */
+#define SC_P_ADC_IN5                             103	/* ADMA.ADC.IN5, M40.TPM0.CH1, M40.GPIO0.IO05, LSIO.GPIO1.IO13 */
+#define SC_P_ADC_IN4                             104	/* ADMA.ADC.IN4, M40.TPM0.CH0, M40.GPIO0.IO04, LSIO.GPIO1.IO14 */
+#define SC_P_FLEXCAN0_RX                         105	/* ADMA.FLEXCAN0.RX, ADMA.SAI2.RXC, ADMA.UART0.RTS_B, ADMA.SAI1.TXC, LSIO.GPIO1.IO15 */
+#define SC_P_FLEXCAN0_TX                         106	/* ADMA.FLEXCAN0.TX, ADMA.SAI2.RXD, ADMA.UART0.CTS_B, ADMA.SAI1.TXFS, LSIO.GPIO1.IO16 */
+#define SC_P_FLEXCAN1_RX                         107	/* ADMA.FLEXCAN1.RX, ADMA.SAI2.RXFS, ADMA.FTM.CH2, ADMA.SAI1.TXD, LSIO.GPIO1.IO17 */
+#define SC_P_FLEXCAN1_TX                         108	/* ADMA.FLEXCAN1.TX, ADMA.SAI3.RXC, ADMA.DMA0.REQ_IN0, ADMA.SAI1.RXD, LSIO.GPIO1.IO18 */
+#define SC_P_FLEXCAN2_RX                         109	/* ADMA.FLEXCAN2.RX, ADMA.SAI3.RXD, ADMA.UART3.RX, ADMA.SAI1.RXFS, LSIO.GPIO1.IO19 */
+#define SC_P_FLEXCAN2_TX                         110	/* ADMA.FLEXCAN2.TX, ADMA.SAI3.RXFS, ADMA.UART3.TX, ADMA.SAI1.RXC, LSIO.GPIO1.IO20 */
+#define SC_P_UART0_RX                            111	/* ADMA.UART0.RX, ADMA.MQS.R, ADMA.FLEXCAN0.RX, SCU.UART0.RX, LSIO.GPIO1.IO21 */
+#define SC_P_UART0_TX                            112	/* ADMA.UART0.TX, ADMA.MQS.L, ADMA.FLEXCAN0.TX, SCU.UART0.TX, LSIO.GPIO1.IO22 */
+#define SC_P_UART2_TX                            113	/* ADMA.UART2.TX, ADMA.FTM.CH1, ADMA.FLEXCAN1.TX, LSIO.GPIO1.IO23 */
+#define SC_P_UART2_RX                            114	/* ADMA.UART2.RX, ADMA.FTM.CH0, ADMA.FLEXCAN1.RX, LSIO.GPIO1.IO24 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIOLH        115	/*  */
+#define SC_P_MIPI_DSI0_I2C0_SCL                  116	/* MIPI_DSI0.I2C0.SCL, MIPI_DSI1.GPIO0.IO02, LSIO.GPIO1.IO25 */
+#define SC_P_MIPI_DSI0_I2C0_SDA                  117	/* MIPI_DSI0.I2C0.SDA, MIPI_DSI1.GPIO0.IO03, LSIO.GPIO1.IO26 */
+#define SC_P_MIPI_DSI0_GPIO0_00                  118	/* MIPI_DSI0.GPIO0.IO00, ADMA.I2C1.SCL, MIPI_DSI0.PWM0.OUT, LSIO.GPIO1.IO27 */
+#define SC_P_MIPI_DSI0_GPIO0_01                  119	/* MIPI_DSI0.GPIO0.IO01, ADMA.I2C1.SDA, LSIO.GPIO1.IO28 */
+#define SC_P_MIPI_DSI1_I2C0_SCL                  120	/* MIPI_DSI1.I2C0.SCL, MIPI_DSI0.GPIO0.IO02, LSIO.GPIO1.IO29 */
+#define SC_P_MIPI_DSI1_I2C0_SDA                  121	/* MIPI_DSI1.I2C0.SDA, MIPI_DSI0.GPIO0.IO03, LSIO.GPIO1.IO30 */
+#define SC_P_MIPI_DSI1_GPIO0_00                  122	/* MIPI_DSI1.GPIO0.IO00, ADMA.I2C2.SCL, MIPI_DSI1.PWM0.OUT, LSIO.GPIO1.IO31 */
+#define SC_P_MIPI_DSI1_GPIO0_01                  123	/* MIPI_DSI1.GPIO0.IO01, ADMA.I2C2.SDA, LSIO.GPIO2.IO00 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_MIPIDSIGPIO   124	/*  */
+#define SC_P_JTAG_TRST_B                         125	/* SCU.JTAG.TRST_B, SCU.WDOG0.WDOG_OUT */
+#define SC_P_PMIC_I2C_SCL                        126	/* SCU.PMIC_I2C.SCL, SCU.GPIO0.IOXX_PMIC_A35_ON, LSIO.GPIO2.IO01 */
+#define SC_P_PMIC_I2C_SDA                        127	/* SCU.PMIC_I2C.SDA, SCU.GPIO0.IOXX_PMIC_GPU_ON, LSIO.GPIO2.IO02 */
+#define SC_P_PMIC_INT_B                          128	/* SCU.DSC.PMIC_INT_B */
+#define SC_P_SCU_GPIO0_00                        129	/* SCU.GPIO0.IO00, SCU.UART0.RX, M40.UART0.RX, ADMA.UART3.RX, LSIO.GPIO2.IO03 */
+#define SC_P_SCU_GPIO0_01                        130	/* SCU.GPIO0.IO01, SCU.UART0.TX, M40.UART0.TX, ADMA.UART3.TX, SCU.WDOG0.WDOG_OUT */
+#define SC_P_SCU_PMIC_STANDBY                    131	/* SCU.DSC.PMIC_STANDBY */
+#define SC_P_SCU_BOOT_MODE0                      132	/* SCU.DSC.BOOT_MODE0 */
+#define SC_P_SCU_BOOT_MODE1                      133	/* SCU.DSC.BOOT_MODE1 */
+#define SC_P_SCU_BOOT_MODE2                      134	/* SCU.DSC.BOOT_MODE2, SCU.PMIC_I2C.SDA */
+#define SC_P_SCU_BOOT_MODE3                      135	/* SCU.DSC.BOOT_MODE3, SCU.PMIC_I2C.SCL, SCU.DSC.RTC_CLOCK_OUTPUT_32K */
+#define SC_P_CSI_D00                             136	/* CI_PI.D02, ADMA.SAI0.RXC */
+#define SC_P_CSI_D01                             137	/* CI_PI.D03, ADMA.SAI0.RXD */
+#define SC_P_CSI_D02                             138	/* CI_PI.D04, ADMA.SAI0.RXFS */
+#define SC_P_CSI_D03                             139	/* CI_PI.D05, ADMA.SAI2.RXC */
+#define SC_P_CSI_D04                             140	/* CI_PI.D06, ADMA.SAI2.RXD */
+#define SC_P_CSI_D05                             141	/* CI_PI.D07, ADMA.SAI2.RXFS */
+#define SC_P_CSI_D06                             142	/* CI_PI.D08, ADMA.SAI3.RXC */
+#define SC_P_CSI_D07                             143	/* CI_PI.D09, ADMA.SAI3.RXD */
+#define SC_P_CSI_HSYNC                           144	/* CI_PI.HSYNC, CI_PI.D00, ADMA.SAI3.RXFS */
+#define SC_P_CSI_VSYNC                           145	/* CI_PI.VSYNC, CI_PI.D01 */
+#define SC_P_CSI_PCLK                            146	/* CI_PI.PCLK, MIPI_CSI0.I2C0.SCL, ADMA.SPI1.SCK, LSIO.GPIO3.IO00 */
+#define SC_P_CSI_MCLK                            147	/* CI_PI.MCLK, MIPI_CSI0.I2C0.SDA, ADMA.SPI1.SDO, LSIO.GPIO3.IO01 */
+#define SC_P_CSI_EN                              148	/* CI_PI.EN, CI_PI.I2C.SCL, ADMA.I2C3.SCL, ADMA.SPI1.SDI, LSIO.GPIO3.IO02 */
+#define SC_P_CSI_RESET                           149	/* CI_PI.RESET, CI_PI.I2C.SDA, ADMA.I2C3.SDA, ADMA.SPI1.CS0, LSIO.GPIO3.IO03 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHD       150	/*  */
+#define SC_P_MIPI_CSI0_MCLK_OUT                  151	/* MIPI_CSI0.ACM.MCLK_OUT, LSIO.GPIO3.IO04 */
+#define SC_P_MIPI_CSI0_I2C0_SCL                  152	/* MIPI_CSI0.I2C0.SCL, MIPI_CSI0.GPIO0.IO02, LSIO.GPIO3.IO05 */
+#define SC_P_MIPI_CSI0_I2C0_SDA                  153	/* MIPI_CSI0.I2C0.SDA, MIPI_CSI0.GPIO0.IO03, LSIO.GPIO3.IO06 */
+#define SC_P_MIPI_CSI0_GPIO0_01                  154	/* MIPI_CSI0.GPIO0.IO01, ADMA.I2C0.SDA, LSIO.GPIO3.IO07 */
+#define SC_P_MIPI_CSI0_GPIO0_00                  155	/* MIPI_CSI0.GPIO0.IO00, ADMA.I2C0.SCL, LSIO.GPIO3.IO08 */
+#define SC_P_QSPI0A_DATA0                        156	/* LSIO.QSPI0A.DATA0, LSIO.GPIO3.IO09 */
+#define SC_P_QSPI0A_DATA1                        157	/* LSIO.QSPI0A.DATA1, LSIO.GPIO3.IO10 */
+#define SC_P_QSPI0A_DATA2                        158	/* LSIO.QSPI0A.DATA2, LSIO.GPIO3.IO11 */
+#define SC_P_QSPI0A_DATA3                        159	/* LSIO.QSPI0A.DATA3, LSIO.GPIO3.IO12 */
+#define SC_P_QSPI0A_DQS                          160	/* LSIO.QSPI0A.DQS, LSIO.GPIO3.IO13 */
+#define SC_P_QSPI0A_SS0_B                        161	/* LSIO.QSPI0A.SS0_B, LSIO.GPIO3.IO14 */
+#define SC_P_QSPI0A_SS1_B                        162	/* LSIO.QSPI0A.SS1_B, LSIO.GPIO3.IO15 */
+#define SC_P_QSPI0A_SCLK                         163	/* LSIO.QSPI0A.SCLK, LSIO.GPIO3.IO16 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_QSPI0A        164	/*  */
+#define SC_P_QSPI0B_SCLK                         165	/* LSIO.QSPI0B.SCLK, LSIO.QSPI1A.SCLK, LSIO.KPP0.COL0, LSIO.GPIO3.IO17 */
+#define SC_P_QSPI0B_DATA0                        166	/* LSIO.QSPI0B.DATA0, LSIO.QSPI1A.DATA0, LSIO.KPP0.COL1, LSIO.GPIO3.IO18 */
+#define SC_P_QSPI0B_DATA1                        167	/* LSIO.QSPI0B.DATA1, LSIO.QSPI1A.DATA1, LSIO.KPP0.COL2, LSIO.GPIO3.IO19 */
+#define SC_P_QSPI0B_DATA2                        168	/* LSIO.QSPI0B.DATA2, LSIO.QSPI1A.DATA2, LSIO.KPP0.COL3, LSIO.GPIO3.IO20 */
+#define SC_P_QSPI0B_DATA3                        169	/* LSIO.QSPI0B.DATA3, LSIO.QSPI1A.DATA3, LSIO.KPP0.ROW0, LSIO.GPIO3.IO21 */
+#define SC_P_QSPI0B_DQS                          170	/* LSIO.QSPI0B.DQS, LSIO.QSPI1A.DQS, LSIO.KPP0.ROW1, LSIO.GPIO3.IO22 */
+#define SC_P_QSPI0B_SS0_B                        171	/* LSIO.QSPI0B.SS0_B, LSIO.QSPI1A.SS0_B, LSIO.KPP0.ROW2, LSIO.GPIO3.IO23 */
+#define SC_P_QSPI0B_SS1_B                        172	/* LSIO.QSPI0B.SS1_B, LSIO.QSPI1A.SS1_B, LSIO.KPP0.ROW3, LSIO.GPIO3.IO24 */
+#define SC_P_COMP_CTL_GPIO_1V8_3V3_QSPI0B        173	/*  */
+/*@}*/
+
+#endif				/* SC_PADS_H */
diff --git a/plat/imx/imx8qx/imx8qx_bl31_setup.c b/plat/imx/imx8qx/imx8qx_bl31_setup.c
new file mode 100644
index 0000000..8dac943
--- /dev/null
+++ b/plat/imx/imx8qx/imx8qx_bl31_setup.c
@@ -0,0 +1,342 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <cci.h>
+#include <console.h>
+#include <context.h>
+#include <context_mgmt.h>
+#include <debug.h>
+#include <imx8qx_pads.h>
+#include <imx8_iomux.h>
+#include <imx8_lpuart.h>
+#include <mmio.h>
+#include <platform.h>
+#include <platform_def.h>
+#include <plat_imx8.h>
+#include <sci/sci.h>
+#include <sec_rsrc.h>
+#include <stdbool.h>
+#include <xlat_tables.h>
+
+IMPORT_SYM(unsigned long, __COHERENT_RAM_START__, BL31_COHERENT_RAM_START);
+IMPORT_SYM(unsigned long, __COHERENT_RAM_END__, BL31_COHERENT_RAM_END);
+IMPORT_SYM(unsigned long, __RO_START__, BL31_RO_START);
+IMPORT_SYM(unsigned long, __RO_END__, BL31_RO_END);
+IMPORT_SYM(unsigned long, __RW_START__, BL31_RW_START);
+IMPORT_SYM(unsigned long, __RW_END__, BL31_RW_END);
+
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+#define UART_PAD_CTRL	(PADRING_IFMUX_EN_MASK | PADRING_GP_EN_MASK | \
+			(SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
+			(SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
+			(SC_PAD_28FDSOI_DSE_DV_LOW << PADRING_DSE_SHIFT) | \
+			(SC_PAD_28FDSOI_PS_PD << PADRING_PULL_SHIFT))
+
+static const mmap_region_t imx_mmap[] = {
+	MAP_REGION_FLAT(IMX_BOOT_UART_BASE, IMX_BOOT_UART_SIZE, MT_DEVICE | MT_RW),
+	MAP_REGION_FLAT(SC_IPC_BASE, SC_IPC_SIZE, MT_DEVICE | MT_RW),
+	MAP_REGION_FLAT(PLAT_GICD_BASE, PLAT_GICD_SIZE, MT_DEVICE | MT_RW),
+	MAP_REGION_FLAT(PLAT_GICR_BASE, PLAT_GICR_SIZE, MT_DEVICE | MT_RW),
+	{0}
+};
+
+static uint32_t get_spsr_for_bl33_entry(void)
+{
+	unsigned long el_status;
+	unsigned long mode;
+	uint32_t spsr;
+
+	/* figure out what mode we enter the non-secure world */
+	el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
+	el_status &= ID_AA64PFR0_ELX_MASK;
+
+	mode = (el_status) ? MODE_EL2 : MODE_EL1;
+
+	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+	return spsr;
+}
+
+#if DEBUG_CONSOLE_A35
+static void lpuart32_serial_setbrg(unsigned int base, int baudrate)
+{
+	unsigned int sbr, osr, baud_diff, tmp_osr, tmp_sbr;
+	unsigned int diff1, diff2, tmp, rate;
+
+	if (baudrate == 0)
+		panic();
+
+	sc_pm_get_clock_rate(ipc_handle, SC_R_UART_0, 2, &rate);
+
+	baud_diff = baudrate;
+	osr = 0;
+	sbr = 0;
+	for (tmp_osr = 4; tmp_osr <= 32; tmp_osr++) {
+		tmp_sbr = (rate / (baudrate * tmp_osr));
+		if (tmp_sbr == 0)
+			tmp_sbr = 1;
+
+		/* calculate difference in actual baud w/ current values */
+		diff1 = rate / (tmp_osr * tmp_sbr) - baudrate;
+		diff2 = rate / (tmp_osr * (tmp_sbr + 1));
+
+		/* select best values between sbr and sbr+1 */
+		if (diff1 > (baudrate - diff2)) {
+			diff1 = baudrate - diff2;
+			tmp_sbr++;
+		}
+
+		if (diff1 <= baud_diff) {
+			baud_diff = diff1;
+			osr = tmp_osr;
+			sbr = tmp_sbr;
+		}
+	}
+
+	tmp = mmio_read_32(IMX_BOOT_UART_BASE + BAUD);
+
+	if ((osr > 3) && (osr < 8))
+		tmp |= LPUART_BAUD_BOTHEDGE_MASK;
+
+	tmp &= ~LPUART_BAUD_OSR_MASK;
+	tmp |= LPUART_BAUD_OSR(osr - 1);
+	tmp &= ~LPUART_BAUD_SBR_MASK;
+	tmp |= LPUART_BAUD_SBR(sbr);
+
+	/* explicitly disable 10 bit mode & set 1 stop bit */
+	tmp &= ~(LPUART_BAUD_M10_MASK | LPUART_BAUD_SBNS_MASK);
+
+	mmio_write_32(IMX_BOOT_UART_BASE + BAUD, tmp);
+}
+
+static int lpuart32_serial_init(unsigned int base)
+{
+	unsigned int tmp;
+
+	/* disable TX & RX before enabling clocks */
+	tmp = mmio_read_32(IMX_BOOT_UART_BASE + CTRL);
+	tmp &= ~(CTRL_TE | CTRL_RE);
+	mmio_write_32(IMX_BOOT_UART_BASE + CTRL, tmp);
+
+	mmio_write_32(IMX_BOOT_UART_BASE + MODIR, 0);
+	mmio_write_32(IMX_BOOT_UART_BASE + FIFO, ~(FIFO_TXFE | FIFO_RXFE));
+
+	mmio_write_32(IMX_BOOT_UART_BASE + MATCH, 0);
+
+	/* provide data bits, parity, stop bit, etc */
+	lpuart32_serial_setbrg(base, IMX_BOOT_UART_BAUDRATE);
+
+	/* eight data bits no parity bit */
+	tmp = mmio_read_32(IMX_BOOT_UART_BASE + CTRL);
+	tmp &= ~(LPUART_CTRL_PE_MASK | LPUART_CTRL_PT_MASK | LPUART_CTRL_M_MASK);
+	mmio_write_32(IMX_BOOT_UART_BASE + CTRL, tmp);
+
+	mmio_write_32(IMX_BOOT_UART_BASE + CTRL, CTRL_RE | CTRL_TE);
+
+	mmio_write_32(IMX_BOOT_UART_BASE + DATA, 0x55);
+	mmio_write_32(IMX_BOOT_UART_BASE + DATA, 0x55);
+	mmio_write_32(IMX_BOOT_UART_BASE + DATA, 0x0A);
+
+	return 0;
+}
+#endif
+
+void imx8_partition_resources(void)
+{
+	sc_rm_pt_t secure_part, os_part;
+	sc_rm_mr_t mr, mr_record = 64;
+	sc_faddr_t start, end;
+	sc_err_t err;
+	bool owned;
+	int i;
+
+	err = sc_rm_get_partition(ipc_handle, &secure_part);
+	if (err)
+		ERROR("sc_rm_get_partition failed: %u\n", err);
+
+	err = sc_rm_partition_alloc(ipc_handle, &os_part, false, false,
+		false, false, false);
+	if (err)
+		ERROR("sc_rm_partition_alloc failed: %u\n", err);
+
+	err = sc_rm_set_parent(ipc_handle, os_part, secure_part);
+	if (err)
+		ERROR("sc_rm_set_parent: %u\n", err);
+
+	/* set secure resources to NOT-movable */
+	for (i = 0; i < (ARRAY_SIZE(secure_rsrcs)); i++) {
+		err = sc_rm_set_resource_movable(ipc_handle,
+			 secure_rsrcs[i], secure_rsrcs[i], false);
+		if (err)
+			ERROR("sc_rm_set_resource_movable: rsrc %u, ret %u\n",
+				secure_rsrcs[i], err);
+	}
+
+	/* move all movable resources and pins to non-secure partition */
+	err = sc_rm_move_all(ipc_handle, secure_part, os_part, true, true);
+	if (err)
+		ERROR("sc_rm_move_all: %u\n", err);
+
+	/* iterate through peripherals to give NS OS part access */
+	for (i = 0; i < ARRAY_SIZE(ns_access_allowed); i++) {
+		err = sc_rm_set_peripheral_permissions(ipc_handle,
+			ns_access_allowed[i], os_part, SC_RM_PERM_FULL);
+		if (err)
+			ERROR("sc_rm_set_peripheral_permissions: rsrc %u, \
+				ret %u\n", ns_access_allowed[i], err);
+	}
+
+	/*
+	 * sc_rm_set_peripheral_permissions
+	 * sc_rm_set_memreg_permissions
+	 * sc_rm_set_pin_movable
+	 */
+	for (mr = 0; mr < 64; mr++) {
+		owned = sc_rm_is_memreg_owned(ipc_handle, mr);
+		if (owned) {
+			err = sc_rm_get_memreg_info(ipc_handle, mr, &start, &end);
+			if (err)
+				ERROR("Memreg get info failed, %u\n", mr);
+
+			NOTICE("Memreg %u 0x%llx -- 0x%llx\n", mr, start, end);
+			if (BL31_BASE >= start && (BL31_LIMIT - 1) <= end) {
+				mr_record = mr; /* Record the mr for ATF running */
+			} else {
+				err = sc_rm_assign_memreg(ipc_handle, os_part, mr);
+				if (err)
+					ERROR("Memreg assign failed, 0x%llx -- 0x%llx, \
+						err %d\n", start, end, err);
+			}
+		}
+	}
+
+	if (mr_record != 64) {
+		err = sc_rm_get_memreg_info(ipc_handle, mr_record, &start, &end);
+		if (err)
+			ERROR("Memreg get info failed, %u\n", mr_record);
+		if ((BL31_LIMIT - 1) < end) {
+			err = sc_rm_memreg_alloc(ipc_handle, &mr, BL31_LIMIT, end);
+			if (err)
+				ERROR("sc_rm_memreg_alloc failed, 0x%llx -- 0x%llx\n",
+					(sc_faddr_t)BL31_LIMIT, end);
+			err = sc_rm_assign_memreg(ipc_handle, os_part, mr);
+			if (err)
+				ERROR("Memreg assign failed, 0x%llx -- 0x%llx\n",
+					(sc_faddr_t)BL31_LIMIT, end);
+		}
+
+		if (start < (BL31_BASE - 1)) {
+			err = sc_rm_memreg_alloc(ipc_handle, &mr, start, BL31_BASE - 1);
+			if (err)
+				ERROR("sc_rm_memreg_alloc failed, 0x%llx -- 0x%llx\n",
+					start, (sc_faddr_t)BL31_BASE - 1);
+			err = sc_rm_assign_memreg(ipc_handle, os_part, mr);
+			if (err)
+				ERROR("Memreg assign failed, 0x%llx -- 0x%llx\n",
+					start, (sc_faddr_t)BL31_BASE - 1);
+		}
+	}
+
+	if (err)
+		NOTICE("Partitioning Failed\n");
+	else
+		NOTICE("Non-secure Partitioning Succeeded\n");
+}
+
+void bl31_early_platform_setup(bl31_params_t *from_bl2,
+				void *plat_params_from_bl2)
+{
+#if DEBUG_CONSOLE
+	static console_lpuart_t console;
+#endif
+	if (sc_ipc_open(&ipc_handle, SC_IPC_BASE) != SC_ERR_NONE)
+		panic();
+
+#if DEBUG_CONSOLE_A35
+	sc_pm_set_resource_power_mode(ipc_handle, SC_R_UART_0, SC_PM_PW_MODE_ON);
+	sc_pm_clock_rate_t rate = 80000000;
+	sc_pm_set_clock_rate(ipc_handle, SC_R_UART_0, 2, &rate);
+	sc_pm_clock_enable(ipc_handle, SC_R_UART_0, 2, true, false);
+
+	/* Configure UART pads */
+	sc_pad_set(ipc_handle, SC_P_UART0_RX, UART_PAD_CTRL);
+	sc_pad_set(ipc_handle, SC_P_UART0_TX, UART_PAD_CTRL);
+	lpuart32_serial_init(IMX_BOOT_UART_BASE);
+#endif
+
+#if DEBUG_CONSOLE
+	console_lpuart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
+		     IMX_CONSOLE_BAUDRATE, &console);
+#endif
+	/* Turn on MU1 for non-secure OS/Hypervisor */
+	sc_pm_set_resource_power_mode(ipc_handle, SC_R_MU_1A, SC_PM_PW_MODE_ON);
+
+	/*
+	 * create new partition for non-secure OS/Hypervisor
+	 * uses global structs defined in sec_rsrc.h
+	 */
+	imx8_partition_resources();
+
+	bl33_image_ep_info.pc = PLAT_NS_IMAGE_OFFSET;
+	bl33_image_ep_info.spsr = get_spsr_for_bl33_entry();
+	SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
+}
+
+void bl31_plat_arch_setup(void)
+{
+	unsigned long ro_start = BL31_RO_START;
+	unsigned long ro_size = BL31_RO_END - BL31_RO_START;
+	unsigned long rw_start = BL31_RW_START;
+	unsigned long rw_size = BL31_RW_END - BL31_RW_START;
+#if USE_COHERENT_MEM
+	unsigned long coh_start = BL31_COHERENT_RAM_START;
+	unsigned long coh_size = BL31_COHERENT_RAM_END - BL31_COHERENT_RAM_START;
+#endif
+
+	mmap_add_region(ro_start, ro_start, ro_size,
+		MT_RO | MT_MEMORY | MT_SECURE);
+	mmap_add_region(rw_start, rw_start, rw_size,
+		MT_RW | MT_MEMORY | MT_SECURE);
+	mmap_add(imx_mmap);
+
+#if USE_COHERENT_MEM
+	mmap_add_region(coh_start, coh_start, coh_size,
+			MT_DEVICE | MT_RW | MT_SECURE);
+#endif
+
+	init_xlat_tables();
+	enable_mmu_el3(0);
+}
+
+void bl31_platform_setup(void)
+{
+	plat_gic_driver_init();
+	plat_gic_init();
+}
+
+entry_point_info_t *bl31_plat_get_next_image_ep_info(unsigned int type)
+{
+	if (type == NON_SECURE)
+		return &bl33_image_ep_info;
+	if (type == SECURE)
+		return &bl32_image_ep_info;
+
+	return NULL;
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+	return COUNTER_FREQUENCY;
+}
+
+void bl31_plat_runtime_setup(void)
+{
+	return;
+}
diff --git a/plat/imx/imx8qx/imx8qx_psci.c b/plat/imx/imx8qx/imx8qx_psci.c
new file mode 100644
index 0000000..47233dc
--- /dev/null
+++ b/plat/imx/imx8qx/imx8qx_psci.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <debug.h>
+#include <gicv3.h>
+#include <mmio.h>
+#include <plat_imx8.h>
+#include <psci.h>
+#include <sci/sci.h>
+#include <stdbool.h>
+
+const static int ap_core_index[PLATFORM_CORE_COUNT] = {
+	SC_R_A35_0, SC_R_A35_1, SC_R_A35_2, SC_R_A35_3
+};
+
+plat_local_state_t plat_get_target_pwr_state(unsigned int lvl,
+					     const plat_local_state_t *target_state,
+					     unsigned int ncpu)
+{
+	return 0;
+}
+
+int imx_pwr_domain_on(u_register_t mpidr)
+{
+	int ret = PSCI_E_SUCCESS;
+	unsigned int cpu_id;
+
+	cpu_id = MPIDR_AFFLVL0_VAL(mpidr);
+
+	tf_printf("imx_pwr_domain_on cpu_id %d\n", cpu_id);
+
+	if (sc_pm_set_resource_power_mode(ipc_handle, ap_core_index[cpu_id],
+	    SC_PM_PW_MODE_ON) != SC_ERR_NONE) {
+		ERROR("core %d power on failed!\n", cpu_id);
+		ret = PSCI_E_INTERN_FAIL;
+	}
+
+	if (sc_pm_cpu_start(ipc_handle, ap_core_index[cpu_id],
+	    true, BL31_BASE) != SC_ERR_NONE) {
+		ERROR("boot core %d failed!\n", cpu_id);
+		ret = PSCI_E_INTERN_FAIL;
+	}
+
+	return ret;
+}
+
+void imx_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+	plat_gic_pcpu_init();
+	plat_gic_cpuif_enable();
+}
+
+int imx_validate_ns_entrypoint(uintptr_t ns_entrypoint)
+{
+	return PSCI_E_SUCCESS;
+}
+
+static const plat_psci_ops_t imx_plat_psci_ops = {
+	.pwr_domain_on = imx_pwr_domain_on,
+	.pwr_domain_on_finish = imx_pwr_domain_on_finish,
+	.validate_ns_entrypoint = imx_validate_ns_entrypoint,
+};
+
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+			const plat_psci_ops_t **psci_ops)
+{
+	imx_mailbox_init(sec_entrypoint);
+	*psci_ops = &imx_plat_psci_ops;
+
+	return 0;
+}
diff --git a/plat/imx/imx8qx/include/platform_def.h b/plat/imx/imx8qx/include/platform_def.h
new file mode 100644
index 0000000..2cd1400
--- /dev/null
+++ b/plat/imx/imx8qx/include/platform_def.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __PLATFORM_DEF_H__
+#define __PLATFORM_DEF_H__
+
+#define PLATFORM_LINKER_FORMAT		"elf64-littleaarch64"
+#define PLATFORM_LINKER_ARCH		aarch64
+
+#define PLATFORM_STACK_SIZE		0x400
+#define CACHE_WRITEBACK_GRANULE		64
+
+#define PLAT_PRIMARY_CPU		0x0
+#define PLATFORM_MAX_CPU_PER_CLUSTER	4
+#define PLATFORM_CLUSTER_COUNT		1
+#define PLATFORM_CORE_COUNT		4
+
+#define PWR_DOMAIN_AT_MAX_LVL           1
+#define PLAT_MAX_PWR_LVL                2
+#define PLAT_MAX_OFF_STATE              2
+#define PLAT_MAX_RET_STATE              1
+
+#define BL31_BASE			0x80000000
+#define BL31_LIMIT			0x80020000
+
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ull << 32)
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ull << 32)
+
+#define MAX_XLAT_TABLES			8
+#define MAX_MMAP_REGIONS		8
+
+#define PLAT_GICD_BASE			0x51a00000
+#define PLAT_GICD_SIZE			0x10000
+#define PLAT_GICR_BASE			0x51b00000
+#define PLAT_GICR_SIZE			0xc0000
+#define IMX_BOOT_UART_BASE		0x5a060000
+#define IMX_BOOT_UART_SIZE		0x1000
+#define IMX_BOOT_UART_BAUDRATE		115200
+#define IMX_BOOT_UART_CLK_IN_HZ		24000000
+#define PLAT_CRASH_UART_BASE		IMX_BOOT_UART_BASE
+#define PLAT__CRASH_UART_CLK_IN_HZ	24000000
+#define IMX_CONSOLE_BAUDRATE		115200
+#define SC_IPC_BASE			0x5d1b0000
+#define SC_IPC_SIZE			0x10000
+
+#define COUNTER_FREQUENCY		8000000
+
+/* non-secure u-boot base */
+#define PLAT_NS_IMAGE_OFFSET		0x80020000
+
+#define DEBUG_CONSOLE			0
+#define DEBUG_CONSOLE_A35		0
+#define PLAT_IMX8QX			1
+
+#endif /* __PLATFORM_DEF_H__ */
diff --git a/plat/imx/imx8qx/include/sec_rsrc.h b/plat/imx/imx8qx/include/sec_rsrc.h
new file mode 100644
index 0000000..37c9f66
--- /dev/null
+++ b/plat/imx/imx8qx/include/sec_rsrc.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* resources that are going to stay in secure partition */
+sc_rsrc_t secure_rsrcs[] = {
+	SC_R_MU_0A,
+	SC_R_A35,
+	SC_R_A35_0,
+	SC_R_A35_1,
+	SC_R_A35_2,
+	SC_R_A35_3,
+	SC_R_GIC,
+	SC_R_SYSTEM,
+	SC_R_IRQSTR_SCU2
+};
+
+/* resources that have register access for non-secure domain */
+sc_rsrc_t ns_access_allowed[] = {
+	SC_R_GIC,
+};
diff --git a/plat/imx/imx8qx/platform.mk b/plat/imx/imx8qx/platform.mk
new file mode 100644
index 0000000..c16ce6e
--- /dev/null
+++ b/plat/imx/imx8qx/platform.mk
@@ -0,0 +1,35 @@
+#
+# Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+PLAT_INCLUDES		:=	-Iplat/imx/imx8qx/include		\
+				-Iplat/imx/common/include		\
+
+IMX_GIC_SOURCES	:=		drivers/arm/gic/v3/gicv3_helpers.c	\
+				drivers/arm/gic/v3/arm_gicv3_common.c	\
+				drivers/arm/gic/v3/gic500.c		\
+				drivers/arm/gic/v3/gicv3_main.c		\
+				drivers/arm/gic/common/gic_common.c	\
+				plat/common/plat_gicv3.c		\
+				plat/imx/common/plat_imx8_gic.c
+
+BL31_SOURCES		+=	plat/imx/common/lpuart_console.S	\
+				plat/imx/common/imx8_helpers.S		\
+				plat/imx/imx8qx/imx8qx_bl31_setup.c	\
+				plat/imx/imx8qx/imx8qx_psci.c		\
+				plat/imx/common/imx8_topology.c		\
+				lib/xlat_tables/xlat_tables_common.c	\
+				lib/xlat_tables/aarch64/xlat_tables.c	\
+				lib/cpus/aarch64/cortex_a35.S		\
+				drivers/console/aarch64/console.S	\
+				${IMX_GIC_SOURCES}			\
+
+include plat/imx/common/sci/sci_api.mk
+
+ENABLE_PLAT_COMPAT	:=	0
+USE_COHERENT_MEM	:=	1
+RESET_TO_BL31		:=	1
+ARM_GIC_ARCH		:=	3
+MULTI_CONSOLE_API	:=	1