fix(stm32mp13-fdts): cleanup DT files
Instead of adding all peripheral nodes in SoC DT files, and then
removing them with BL2 overlay file, just remove them from SoC files.
And remove peripherals that are not used in TF-A on STM32MP13.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I0c408d29b55cb94644c92539460fc62485781223
diff --git a/fdts/stm32mp13-bl2.dtsi b/fdts/stm32mp13-bl2.dtsi
index 00bf1b5..4e3701c 100644
--- a/fdts/stm32mp13-bl2.dtsi
+++ b/fdts/stm32mp13-bl2.dtsi
@@ -9,70 +9,12 @@
/delete-property/ mmc0;
/delete-property/ mmc1;
#endif
- /delete-property/ ethernet0;
- /delete-property/ ethernet1;
};
- cpus {
- cpu@0 {
- /delete-property/ operating-points-v2;
- };
- };
-
- /delete-node/ cpu0-opp-table;
- /delete-node/ psci;
-
soc {
- /delete-node/ sram@30000000;
- /delete-node/ timer@40000000;
- /delete-node/ timer@40001000;
- /delete-node/ timer@40002000;
- /delete-node/ timer@40003000;
- /delete-node/ timer@40004000;
- /delete-node/ timer@40005000;
- /delete-node/ timer@40009000;
- /delete-node/ spi@4000b000;
- /delete-node/ audio-controller@4000b000;
- /delete-node/ spi@4000c000;
- /delete-node/ audio-controller@4000c000;
- /delete-node/ audio-controller@4000d000;
- /delete-node/ i2c@40012000;
- /delete-node/ i2c@40013000;
- /delete-node/ timer@44000000;
- /delete-node/ timer@44001000;
- /delete-node/ spi@44004000;
- /delete-node/ audio-controller@44004000;
- /delete-node/ sai@4400a000;
- /delete-node/ sai@4400b000;
- /delete-node/ dfsdm@4400d000;
- /delete-node/ can@4400e000;
- /delete-node/ can@4400f000;
- /delete-node/ dma-controller@48000000;
- /delete-node/ dma-controller@48001000;
- /delete-node/ dma-router@48002000;
- /delete-node/ adc@48003000;
- /delete-node/ adc@48004000;
- /delete-node/ dma@48005000;
- /delete-node/ dma-router@48006000;
#if !STM32MP_USB_PROGRAMMER
/delete-node/ usb-otg@49000000;
#endif
- /delete-node/ spi@4c002000;
- /delete-node/ spi@4c003000;
- /delete-node/ timer@4c007000;
- /delete-node/ timer@4c008000;
- /delete-node/ timer@4c009000;
- /delete-node/ timer@4c00a000;
- /delete-node/ timer@4c00b000;
- /delete-node/ timer@4c00c000;
- /delete-node/ timer@50021000;
- /delete-node/ timer@50022000;
- /delete-node/ timer@50023000;
- /delete-node/ timer@50024000;
- /delete-node/ vrefbuf@50025000;
- /delete-node/ thermal@50028000;
- /delete-node/ hdp@5002a000;
- /delete-node/ dma-controller@58000000;
#if !STM32MP_RAW_NAND
/delete-node/ memory-controller@58002000;
#endif
@@ -83,23 +25,13 @@
/delete-node/ mmc@58005000;
/delete-node/ mmc@58007000;
#endif
- /delete-node/ crc@58009000;
- /delete-node/ stmmac-axi-config;
- /delete-node/ eth1@5800a000;
#if !STM32MP_USB_PROGRAMMER
/delete-node/ usbh-ohci@5800c000;
/delete-node/ usbh-ehci@5800d000;
#endif
- /delete-node/ eth2@5800e000;
- /delete-node/ dcmipp@5a000000;
- /delete-node/ display-controller@5a001000;
#if !STM32MP_USB_PROGRAMMER
/delete-node/ usbphyc@5a006000;
#endif
- /delete-node/ perf@5a007000;
- /delete-node/ rtc@5c004000;
- /delete-node/ tamp@5c00a000;
- /delete-node/ stgen@5c008000;
pinctrl@50002000 {
#if !STM32MP_EMMC && !STM32MP_SDMMC
diff --git a/fdts/stm32mp131.dtsi b/fdts/stm32mp131.dtsi
index 712ac20..2c62408 100644
--- a/fdts/stm32mp131.dtsi
+++ b/fdts/stm32mp131.dtsi
@@ -259,15 +259,6 @@
clocks = <&rcc SYSCFG>;
};
- vrefbuf: vrefbuf@50025000 {
- compatible = "st,stm32-vrefbuf";
- reg = <0x50025000 0x8>;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <2500000>;
- clocks = <&rcc VREF>;
- status = "disabled";
- };
-
hash: hash@54003000 {
compatible = "st,stm32mp13-hash";
reg = <0x54003000 0x400>;
@@ -350,12 +341,6 @@
status = "disabled";
};
- crc1: crc@58009000 {
- compatible = "st,stm32f7-crc";
- reg = <0x58009000 0x400>;
- clocks = <&rcc CRC1>;
- };
-
usbh_ohci: usbh-ohci@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
@@ -471,11 +456,6 @@
st,non-secure-otp;
};
};
-
- tamp: tamp@5c00a000 {
- reg = <0x5c00a000 0x400>;
- };
-
/*
* Break node order to solve dependency probe issue between
* pinctrl and exti.
diff --git a/fdts/stm32mp133.dtsi b/fdts/stm32mp133.dtsi
index 8bbcc61..bb468c0 100644
--- a/fdts/stm32mp133.dtsi
+++ b/fdts/stm32mp133.dtsi
@@ -5,17 +5,3 @@
*/
#include "stm32mp131.dtsi"
-
-/ {
- soc {
- m_can1: can@4400e000 {
- reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
- status = "disabled";
- };
-
- m_can2: can@4400f000 {
- reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
- status = "disabled";
- };
- };
-};
diff --git a/fdts/stm32mp135.dtsi b/fdts/stm32mp135.dtsi
index 415bb9b..b5ebdd9 100644
--- a/fdts/stm32mp135.dtsi
+++ b/fdts/stm32mp135.dtsi
@@ -5,8 +5,3 @@
*/
#include "stm32mp133.dtsi"
-
-/ {
- soc {
- };
-};
diff --git a/fdts/stm32mp13xc.dtsi b/fdts/stm32mp13xc.dtsi
index c03bd43..4b30c5c 100644
--- a/fdts/stm32mp13xc.dtsi
+++ b/fdts/stm32mp13xc.dtsi
@@ -8,15 +8,6 @@
/ {
soc {
- cryp: crypto@54002000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
-
saes: saes@54005000 {
compatible = "st,stm32-saes";
reg = <0x54005000 0x400>;
diff --git a/fdts/stm32mp13xf.dtsi b/fdts/stm32mp13xf.dtsi
index e467d71..887c4e0 100644
--- a/fdts/stm32mp13xf.dtsi
+++ b/fdts/stm32mp13xf.dtsi
@@ -7,15 +7,6 @@
/ {
soc {
- cryp: crypto@54002000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
-
saes: saes@54005000 {
compatible = "st,stm32-saes";
reg = <0x54005000 0x400>;