diff --git a/plat/socionext/synquacer/drivers/scpi/sq_scpi.c b/plat/socionext/synquacer/drivers/scpi/sq_scpi.c
index a6924e2..170b7e1 100644
--- a/plat/socionext/synquacer/drivers/scpi/sq_scpi.c
+++ b/plat/socionext/synquacer/drivers/scpi/sq_scpi.c
@@ -168,3 +168,49 @@
 
 	return response.status;
 }
+
+uint32_t scpi_get_draminfo(struct draminfo *info)
+{
+	scpi_cmd_t *cmd;
+	struct {
+		scpi_cmd_t	cmd;
+		struct draminfo	info;
+	} response;
+	uint32_t mhu_status;
+
+	scpi_secure_message_start();
+
+	/* Populate the command header */
+	cmd		= SCPI_CMD_HEADER_AP_TO_SCP;
+	cmd->id		= SCPI_CMD_GET_DRAMINFO;
+	cmd->set	= SCPI_SET_EXTENDED;
+	cmd->sender	= 0;
+	cmd->size	= 0;
+
+	scpi_secure_message_send(0);
+
+	mhu_status = mhu_secure_message_wait();
+
+	/* Expect an SCPI message, reject any other protocol */
+	if (mhu_status != (1 << SCPI_MHU_SLOT_ID)) {
+		ERROR("MHU: Unexpected protocol (MHU status: 0x%x)\n",
+			mhu_status);
+		panic();
+	}
+
+	/*
+	 * Ensure that any read to the SCPI payload area is done after reading
+	 * the MHU register. If these 2 reads were reordered then the CPU would
+	 * read invalid payload data
+	 */
+	dmbld();
+
+	memcpy(&response, (void *)SCPI_SHARED_MEM_SCP_TO_AP, sizeof(response));
+
+	scpi_secure_message_end();
+
+	if (response.cmd.status == SCP_OK)
+		*info = response.info;
+
+	return response.cmd.status;
+}
diff --git a/plat/socionext/synquacer/include/platform_def.h b/plat/socionext/synquacer/include/platform_def.h
index f9bc402..e339d85 100644
--- a/plat/socionext/synquacer/include/platform_def.h
+++ b/plat/socionext/synquacer/include/platform_def.h
@@ -54,6 +54,8 @@
 #define SQ_SYS_TIMCTL_BASE		0x2a810000
 #define PLAT_SQ_NSTIMER_FRAME_ID	0
 
+#define DRAMINFO_BASE			0x2E00FFC0
+
 #define PLAT_SQ_MHU_BASE		0x45000000
 
 #define PLAT_SQ_SCP_COM_SHARED_MEM_BASE		0x45400000
diff --git a/plat/socionext/synquacer/include/sq_common.h b/plat/socionext/synquacer/include/sq_common.h
index 8839a05..58b1e24 100644
--- a/plat/socionext/synquacer/include/sq_common.h
+++ b/plat/socionext/synquacer/include/sq_common.h
@@ -10,6 +10,19 @@
 #include <sys/types.h>
 #include <xlat_tables_v2.h>
 
+struct draminfo {
+	uint32_t	num_regions;
+	uint32_t	reserved;
+	uint64_t	base1;
+	uint64_t	size1;
+	uint64_t	base2;
+	uint64_t	size2;
+	uint64_t	base3;
+	uint64_t	size3;
+};
+
+uint32_t scpi_get_draminfo(struct draminfo *info);
+
 void plat_sq_pwrc_setup(void);
 
 void plat_sq_interconnect_init(void);
diff --git a/plat/socionext/synquacer/sq_bl31_setup.c b/plat/socionext/synquacer/sq_bl31_setup.c
index 4d7c851..461c8de 100644
--- a/plat/socionext/synquacer/sq_bl31_setup.c
+++ b/plat/socionext/synquacer/sq_bl31_setup.c
@@ -132,6 +132,9 @@
 
 void bl31_plat_runtime_setup(void)
 {
+	struct draminfo *di = (struct draminfo *)(unsigned long)DRAMINFO_BASE;
+
+	scpi_get_draminfo(di);
 }
 
 void bl31_plat_arch_setup(void)