diff --git a/plat/xilinx/zynqmp/bl31_zynqmp_setup.c b/plat/xilinx/zynqmp/bl31_zynqmp_setup.c
index ffed591..d878b86 100644
--- a/plat/xilinx/zynqmp/bl31_zynqmp_setup.c
+++ b/plat/xilinx/zynqmp/bl31_zynqmp_setup.c
@@ -38,24 +38,7 @@
 #include <platform.h>
 #include "zynqmp_private.h"
 
-/*
- * Declarations of linker defined symbols which will help us find the layout
- * of trusted SRAM
- */
-extern unsigned long __RO_START__;
-extern unsigned long __RO_END__;
-
-extern unsigned long __COHERENT_RAM_START__;
-extern unsigned long __COHERENT_RAM_END__;
-
-/*
- * The next 2 constants identify the extents of the code & RO data region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses.
- */
-#define BL31_RO_BASE (unsigned long)(&__RO_START__)
-#define BL31_RO_LIMIT (unsigned long)(&__RO_END__)
+#define BL31_END (unsigned long)(&__BL31_END__)
 
 /*
  * The next 2 constants identify the extents of the coherent memory region.
@@ -154,12 +137,12 @@
 	plat_arm_interconnect_init();
 	plat_arm_interconnect_enter_coherency();
 
-	arm_setup_page_tables(BL31_RO_BASE,
-			      BL31_COHERENT_RAM_LIMIT - BL31_RO_BASE,
-			      BL31_RO_BASE,
-			      BL31_RO_LIMIT,
-			      0,
-			      0,
+	arm_setup_page_tables(BL31_BASE,
+			      BL31_END - BL31_BASE,
+			      BL_CODE_BASE,
+			      BL_CODE_LIMIT,
+			      BL_RO_DATA_BASE,
+			      BL_RO_DATA_LIMIT,
 			      BL31_COHERENT_RAM_BASE,
 			      BL31_COHERENT_RAM_LIMIT);
 	enable_mmu_el3(0);
diff --git a/plat/xilinx/zynqmp/include/platform_def.h b/plat/xilinx/zynqmp/include/platform_def.h
index 76a52de..a35bd12 100644
--- a/plat/xilinx/zynqmp/include/platform_def.h
+++ b/plat/xilinx/zynqmp/include/platform_def.h
@@ -100,7 +100,7 @@
  * Platform specific page table and MMU setup constants
  ******************************************************************************/
 #define ADDR_SPACE_SIZE			(1ull << 32)
-#define MAX_MMAP_REGIONS		6
+#define MAX_MMAP_REGIONS		7
 #if IMAGE_BL32
 # define MAX_XLAT_TABLES		5
 #else
diff --git a/plat/xilinx/zynqmp/platform.mk b/plat/xilinx/zynqmp/platform.mk
index ad87cd9..a93ce3c 100644
--- a/plat/xilinx/zynqmp/platform.mk
+++ b/plat/xilinx/zynqmp/platform.mk
@@ -30,6 +30,7 @@
 PROGRAMMABLE_RESET_ADDRESS := 1
 PSCI_EXTENDED_STATE_ID := 1
 A53_DISABLE_NON_TEMPORAL_HINT := 0
+SEPARATE_CODE_AND_RODATA := 1
 
 ifdef ZYNQMP_ATF_MEM_BASE
     $(eval $(call add_define,ZYNQMP_ATF_MEM_BASE))
diff --git a/plat/xilinx/zynqmp/tsp/tsp_plat_setup.c b/plat/xilinx/zynqmp/tsp/tsp_plat_setup.c
index ae66fa4..8e3ca62 100644
--- a/plat/xilinx/zynqmp/tsp/tsp_plat_setup.c
+++ b/plat/xilinx/zynqmp/tsp/tsp_plat_setup.c
@@ -35,19 +35,8 @@
 #include <plat_arm.h>
 #include "../zynqmp_private.h"
 
-/*
- * The next 3 constants identify the extents of the code & RO data region and
- * the limit of the BL32 image. These addresses are used by the MMU setup code
- * and therefore they must be page-aligned.  It is the responsibility of the
- * linker script to ensure that __RO_START__, __RO_END__ & & __BL32_END__
- * linker symbols refer to page-aligned addresses.
- */
-#define BL32_RO_BASE (unsigned long)(&__RO_START__)
-#define BL32_RO_LIMIT (unsigned long)(&__RO_END__)
 #define BL32_END (unsigned long)(&__BL32_END__)
 
-
-#if USE_COHERENT_MEM
 /*
  * The next 2 constants identify the extents of the coherent memory region.
  * These addresses are used by the MMU setup code and therefore they must be
@@ -57,7 +46,6 @@
  */
 #define BL32_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
 #define BL32_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-#endif
 
 /*******************************************************************************
  * Initialize the UART
@@ -90,16 +78,14 @@
  ******************************************************************************/
 void tsp_plat_arch_setup(void)
 {
-	arm_setup_page_tables(BL32_RO_BASE,
-			      (BL32_END - BL32_RO_BASE),
-			      BL32_RO_BASE,
-			      BL32_RO_LIMIT,
-			      0,
-			      0
-#if USE_COHERENT_MEM
-			      , BL32_COHERENT_RAM_BASE,
+	arm_setup_page_tables(BL32_BASE,
+			      BL32_END - BL32_BASE,
+			      BL_CODE_BASE,
+			      BL_CODE_LIMIT,
+			      BL_RO_DATA_BASE,
+			      BL_RO_DATA_LIMIT,
+			      BL32_COHERENT_RAM_BASE,
 			      BL32_COHERENT_RAM_LIMIT
-#endif
 			      );
 	enable_mmu_el1(0);
 }