fix(zynqmp): with DEBUG=1 move bl31 to DDR range
Due to size constraints in OCM memory range keeping the bl31 with
DEBUG=1 overlaps with the memory range from other Firmware thus
affecting the bootflow on target.
bl31 binary can not be placed in OCM memory range when built with
DEBUG=1.
With DEBUG=1, by default bl31 is moved to DDR memory range
0x1000-0x7FFFF.
The user can provide a custom DDR memory range during build time using
the build parameters ZYNQMP_ATF_MEM_BASE and ZYNQMP_ATF_MEM_SIZE.
Change-Id: I167d5eadbae7c6d3ec9b32f494b0b1a819bea5b0
Signed-off-by: Akshay Belsare <akshay.belsare@amd.com>
diff --git a/docs/plat/xilinx-zynqmp.rst b/docs/plat/xilinx-zynqmp.rst
index af1cb22..bc6bb34 100644
--- a/docs/plat/xilinx-zynqmp.rst
+++ b/docs/plat/xilinx-zynqmp.rst
@@ -41,6 +41,21 @@
- ``cadence``, ``cadence0``: Cadence UART 0
- ``cadence1`` : Cadence UART 1
+ZynqMP Debug behavior
+---------------------
+
+With DEBUG=1, TF-A for ZynqMP uses DDR memory range instead of OCM memory range
+due to size constraints.
+For DEBUG=1 configuration for ZynqMP the BL31_BASE is set to the DDR location
+of 0x1000 and BL31_LIMIT is set to DDR location of 0x7FFFF.
+
+If the user wants to move the bl31 to a different DDR location, user can provide
+the DDR address location in the build command as follows,
+
+make CROSS_COMPILE=aarch64-none-elf- PLAT=zynqmp RESET_TO_BL31=1 DEBUG=1 \
+ ZYNQMP_ATF_MEM_BASE=<DDR address> ZYNQMP_ATF_MEM_SIZE=<size> bl31
+
+
FSBL->TF-A Parameter Passing
----------------------------
diff --git a/plat/xilinx/zynqmp/include/platform_def.h b/plat/xilinx/zynqmp/include/platform_def.h
index fbf01ca..ffed0ee 100644
--- a/plat/xilinx/zynqmp/include/platform_def.h
+++ b/plat/xilinx/zynqmp/include/platform_def.h
@@ -40,8 +40,8 @@
# define BL31_BASE U(0xfffea000)
# define BL31_LIMIT U(0x100000000)
#else
-# define BL31_BASE U(0xfffe5000)
-# define BL31_LIMIT U(0x100000000)
+# define BL31_BASE U(0x1000)
+# define BL31_LIMIT U(0x7ffff)
#endif
#else
# define BL31_BASE (ZYNQMP_ATF_MEM_BASE)