Parametrize baudrate and UART clock during console_init()
This patch adds baud rate and UART clock frequency as parameters
to the pl011 driver api console_init(). This allows each platform
to specify UART clock and baud rate according to their specific
hardware implementation.
Fixes ARM-software/tf-issues#215
Change-Id: Id13eef70a1c530e709b34dd1e6eb84db0797ced2
diff --git a/plat/fvp/bl1_fvp_setup.c b/plat/fvp/bl1_fvp_setup.c
index bfd0f55..b146fdb 100644
--- a/plat/fvp/bl1_fvp_setup.c
+++ b/plat/fvp/bl1_fvp_setup.c
@@ -73,7 +73,7 @@
const size_t bl1_size = BL1_RAM_LIMIT - BL1_RAM_BASE;
/* Initialize the console to provide early debug support */
- console_init(PL011_UART0_BASE);
+ console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
/* Allow BL1 to see the whole Trusted RAM */
bl1_tzram_layout.total_base = TZRAM_BASE;
diff --git a/plat/fvp/bl2_fvp_setup.c b/plat/fvp/bl2_fvp_setup.c
index beba804..c0ad340 100644
--- a/plat/fvp/bl2_fvp_setup.c
+++ b/plat/fvp/bl2_fvp_setup.c
@@ -168,7 +168,7 @@
void bl2_early_platform_setup(meminfo_t *mem_layout)
{
/* Initialize the console to provide early debug support */
- console_init(PL011_UART0_BASE);
+ console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
/* Setup the BL2 memory layout */
bl2_tzram_layout = *mem_layout;
diff --git a/plat/fvp/bl31_fvp_setup.c b/plat/fvp/bl31_fvp_setup.c
index 96f4772..ca72aa9 100644
--- a/plat/fvp/bl31_fvp_setup.c
+++ b/plat/fvp/bl31_fvp_setup.c
@@ -143,7 +143,7 @@
void *plat_params_from_bl2)
{
/* Initialize the console to provide early debug support */
- console_init(PL011_UART0_BASE);
+ console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
/* Initialize the platform config for future decision making */
fvp_config_setup();
diff --git a/plat/fvp/bl32_fvp_setup.c b/plat/fvp/bl32_fvp_setup.c
index 901c585..aa49ff3 100644
--- a/plat/fvp/bl32_fvp_setup.c
+++ b/plat/fvp/bl32_fvp_setup.c
@@ -72,7 +72,7 @@
* Initialize a different console than already in use to display
* messages from TSP
*/
- console_init(PL011_UART1_BASE);
+ console_init(PL011_UART1_BASE, PL011_UART1_CLK_IN_HZ, PL011_BAUDRATE);
/* Initialize the platform config for future decision making */
fvp_config_setup();
diff --git a/plat/fvp/fvp_def.h b/plat/fvp/fvp_def.h
index 89c8b02..21edb3b 100644
--- a/plat/fvp/fvp_def.h
+++ b/plat/fvp/fvp_def.h
@@ -198,6 +198,13 @@
#define PL011_UART2_BASE 0x1c0b0000
#define PL011_UART3_BASE 0x1c0c0000
+#define PL011_BAUDRATE 115200
+
+#define PL011_UART0_CLK_IN_HZ 24000000
+#define PL011_UART1_CLK_IN_HZ 24000000
+#define PL011_UART2_CLK_IN_HZ 24000000
+#define PL011_UART3_CLK_IN_HZ 24000000
+
/*******************************************************************************
* TrustZone address space controller related constants
******************************************************************************/