Merge changes I80661161,I82c1fa93,I018ccbb9,Ibc23734d,I97406abe, ... into integration
* changes:
feat(intel): add SMC support for HWMON voltage and temp sensor
feat(intel): add SMC support for Get USERCODE
fix(intel): extend SDM command to return the SDM firmware version
feat(intel): add SMC for enquiring firmware version
fix(intel): configuration status based on start request
fix(intel): bit-wise configuration flag handling
fix(intel): get config status OK status
fix(intel): use macro as return value
fix(intel): fix fpga config write return mechanism
feat(intel): add SiP service for DCMF status
feat(intel): add RSU 'Max Retry' SiP SMC services
feat(intel): enable SMC SoC FPGA bridges enable/disable
feat(intel): add SMC/PSCI services for DCMF version support
feat(intel): allow to access all register addresses if DEBUG=1
fix(intel): modify how configuration type is handled
feat(intel): support SiP SVC version
feat(intel): enable firewall for OCRAM in BL31
feat(intel): create source file for firewall configuration
fix(intel): refactor NOC header
diff --git a/bl2/bl2_el3.ld.S b/bl2/bl2_el3.ld.S
index 6aa7afd..c95706c 100644
--- a/bl2/bl2_el3.ld.S
+++ b/bl2/bl2_el3.ld.S
@@ -17,12 +17,12 @@
RAM (rwx): ORIGIN = BL2_RW_BASE, LENGTH = BL2_RW_LIMIT - BL2_RW_BASE
#else
RAM (rwx): ORIGIN = BL2_BASE, LENGTH = BL2_LIMIT - BL2_BASE
+#endif
#if SEPARATE_BL2_NOLOAD_REGION
RAM_NOLOAD (rw!a): ORIGIN = BL2_NOLOAD_START, LENGTH = BL2_NOLOAD_LIMIT - BL2_NOLOAD_START
#else
#define RAM_NOLOAD RAM
#endif
-#endif
}
#if !BL2_IN_XIP_MEM
diff --git a/common/fdt_wrappers.c b/common/fdt_wrappers.c
index 2a9673f..1b065b1 100644
--- a/common/fdt_wrappers.c
+++ b/common/fdt_wrappers.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2018-2021, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -618,3 +618,24 @@
return ret;
}
+
+/*
+ * Find a given node in device tree. If not present, add it.
+ * Returns offset of node found/added on success, and < 0 on error.
+ */
+int fdtw_find_or_add_subnode(void *fdt, int parentoffset, const char *name)
+{
+ int offset;
+
+ offset = fdt_subnode_offset(fdt, parentoffset, name);
+
+ if (offset == -FDT_ERR_NOTFOUND) {
+ offset = fdt_add_subnode(fdt, parentoffset, name);
+ }
+
+ if (offset < 0) {
+ ERROR("%s: %s: %s\n", __func__, name, fdt_strerror(offset));
+ }
+
+ return offset;
+}
diff --git a/docs/getting_started/prerequisites.rst b/docs/getting_started/prerequisites.rst
index a9024e2..92a2c83 100644
--- a/docs/getting_started/prerequisites.rst
+++ b/docs/getting_started/prerequisites.rst
@@ -26,7 +26,7 @@
|TF-A| can be built with any of the following *cross-compiler* toolchains that
target the Armv7-A or Armv8-A architectures:
-- GCC >= 10.3-2021.07 (from the `Arm Developer website`_)
+- GCC >= 11.2-2022.02 (from the `Arm Developer website`_)
- Clang >= 4.0
- Arm Compiler >= 6.0
diff --git a/include/common/fdt_wrappers.h b/include/common/fdt_wrappers.h
index 9c7180c..2929fc2 100644
--- a/include/common/fdt_wrappers.h
+++ b/include/common/fdt_wrappers.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2018-2021, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -44,6 +44,8 @@
int fdtw_for_each_cpu(const void *fdt,
int (*callback)(const void *dtb, int node, uintptr_t mpidr));
+int fdtw_find_or_add_subnode(void *fdt, int parentoffset, const char *name);
+
static inline uint32_t fdt_blob_size(const void *dtb)
{
const uint32_t *dtb_header = dtb;
diff --git a/make_helpers/build_macros.mk b/make_helpers/build_macros.mk
index 12aaee6..a58caf5 100644
--- a/make_helpers/build_macros.mk
+++ b/make_helpers/build_macros.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -489,6 +489,10 @@
$(ELF): romlib.bin
endif
+# MODULE_OBJS can be assigned by vendors with different compiled
+# object file path, and prebuilt object file path.
+$(eval OBJS += $(MODULE_OBJS))
+
$(ELF): $(OBJS) $(LINKERFILE) | $(1)_dirs libraries $(BL_LIBS)
$$(ECHO) " LD $$@"
ifdef MAKE_BUILD_STRINGS
@@ -507,7 +511,7 @@
$(BUILD_DIR)/build_message.o $(OBJS)
else ifneq ($(findstring gcc,$(notdir $(LD))),)
$$(Q)$$(LD) -o $$@ $$(TF_LDFLAGS) $$(LDFLAGS) -Wl,-Map=$(MAPFILE) \
- -Wl,-T$(LINKERFILE) $(BUILD_DIR)/build_message.o \
+ -Wl,-dT $(LINKERFILE) $(EXTRA_LINKERFILE) $(BUILD_DIR)/build_message.o \
$(OBJS) $(LDPATHS) $(LIBWRAPPER) $(LDLIBS) $(BL_LIBS)
else
$$(Q)$$(LD) -o $$@ $$(TF_LDFLAGS) $$(LDFLAGS) $(BL_LDFLAGS) -Map=$(MAPFILE) \
diff --git a/plat/arm/board/fvp/jmptbl.i b/plat/arm/board/fvp/jmptbl.i
index b72bdab..85e6e3a 100644
--- a/plat/arm/board/fvp/jmptbl.i
+++ b/plat/arm/board/fvp/jmptbl.i
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -35,6 +35,8 @@
fdt fdt_get_name
fdt fdt_get_alias
fdt fdt_node_offset_by_phandle
+fdt fdt_subnode_offset
+fdt fdt_add_subnode
mbedtls mbedtls_asn1_get_alg
mbedtls mbedtls_asn1_get_alg_null
mbedtls mbedtls_asn1_get_bitstring_null
diff --git a/plat/arm/board/juno/jmptbl.i b/plat/arm/board/juno/jmptbl.i
index 393a648..8932aa0 100644
--- a/plat/arm/board/juno/jmptbl.i
+++ b/plat/arm/board/juno/jmptbl.i
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -34,6 +34,8 @@
fdt fdt_get_name
fdt fdt_get_alias
fdt fdt_node_offset_by_phandle
+fdt fdt_subnode_offset
+fdt fdt_add_subnode
mbedtls mbedtls_asn1_get_alg
mbedtls mbedtls_asn1_get_alg_null
mbedtls mbedtls_asn1_get_bitstring_null
diff --git a/plat/mediatek/build_helpers/conditional_eval_options.mk b/plat/mediatek/build_helpers/conditional_eval_options.mk
new file mode 100644
index 0000000..6bb3b4e
--- /dev/null
+++ b/plat/mediatek/build_helpers/conditional_eval_options.mk
@@ -0,0 +1,51 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Conditional makefile variable assignment
+
+# Options depend on BUILD_TYPE variable
+ifeq ($(BUILD_TYPE),release)
+MTK_DEBUGSYS_LOCK := 1
+MTK_GET_PERM_DIS := 1
+ERRATA_KLEIN_2218950 := 0
+ERRATA_KLEIN_2184257 := 0
+ERRATA_KLEIN_BOOKER := 0
+ERRATA_MTH_BOOKER := 0
+ERRATA_MTHELP_BOOKER := 0
+CRASH_REPORTING := 1
+CONFIG_MTK_BL31_RAMDUMP := 0
+endif
+
+ifeq ($(BUILD_TYPE),debug)
+MTK_PTP3_PROC_DEBUG := 1
+MTK_SRAMRC_DEBUG := 1
+MTK_IOMMU_DEBUG := 1
+MTK_DCM_DEBUG := 1
+MTK_EMI_MPU_DEBUG := 1
+endif
+
+ifeq (${SPD},none)
+SPD_NONE:=1
+$(eval $(call add_define,SPD_NONE))
+endif
+
+# TEE OS config
+ifeq ($(SPD), tbase)
+CONFIG_TBASE := y
+endif
+
+# MICROTRUST OS config
+ifeq ($(SPD), teeid)
+CONFIG_MICROTRUST_TEEI := y
+endif
+
+ifeq (${CONFIG_ARCH_ARM_V8_2},y)
+ARCH_VERSION := armv8_2
+endif
+
+ifeq (${CONFIG_ARCH_ARM_V9},y)
+ARCH_VERSION := armv9
+endif
diff --git a/plat/mediatek/build_helpers/mtk_build_helpers.mk b/plat/mediatek/build_helpers/mtk_build_helpers.mk
new file mode 100644
index 0000000..47d96fa
--- /dev/null
+++ b/plat/mediatek/build_helpers/mtk_build_helpers.mk
@@ -0,0 +1,139 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Get local directory path
+define GET_LOCAL_DIR
+$(patsubst %/,%,$(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))))
+endef
+
+# Clear module source variable
+define CLEAR_LOCAL_SRCS
+$(eval $(1) :=)
+endef
+
+define EXPAND_SUB_MAKEFILE
+include $(S)
+endef
+
+# Expand sub rules.mk
+define INCLUDE_MAKEFILE
+$(eval MODULES_SUB_MAKEFILE := $(patsubst %,%/rules.mk,$(1)))
+$(foreach S,$(MODULES_SUB_MAKEFILE),$(eval $(EXPAND_SUB_MAKEFILE)))
+endef
+
+# Determine option variable is defined or not then define it
+define add_defined_option
+ifdef $(1)
+ifeq ($(findstring $(value $(1)), $(uppercase_table)),)
+DEFINES += -D$(1)$(if $(value $(1)),=$(value $(1)),)
+else
+ifeq ($(strip $(value $(1))),y)
+DEFINES += -D$(1)$(if $(value $(1)),=1,)
+endif
+endif
+endif
+endef
+
+define EXPAND_RULES_MAKEFILE
+LOCAL_SRCS-y :=
+MODULE :=
+SUB_RULES-y :=
+include $(S)
+endef
+
+# INCLUDE_MODULES macro expand included modules rules.mk
+# Arguments:
+# $(1) = MODULES variables
+define INCLUDE_MODULES
+$(eval MODULES_TEMP := $(1))
+$(eval MODULES_MAKEFILE := $(patsubst %,%/rules.mk,$(MODULES_TEMP)))
+$(foreach S,$(MODULES_MAKEFILE),$(eval $(EXPAND_RULES_MAKEFILE)))
+endef
+
+# MAKE_LOCALS expand module source file variable to BL${BL}_SOURCES
+# Arguments:
+# $(1) = source file
+# $(2) = BL stage (1, 2, 2u, 31, 32)
+define MAKE_LOCALS
+$(eval $(call uppercase,$(2))_SOURCES += $(1))
+endef
+
+# MAKE_LINKERFILE change linker script source file name to
+# target linker script
+# $(1) = linker script source file
+# $(2) = BL stage
+define MAKE_LINKERFILE
+$(eval EXTRA_GENERATED_LINKER_SCRIPT += $(BUILD_PLAT)/$(2)/$(patsubst %.ld.S,%.ld,$(notdir $(1))))
+endef
+
+# MAKE_LINKERFILE_ITER call MAKE_LINKERFILE iteratively
+# $(1) = linker script source file
+# $(2) = BL stage
+define MAKE_LINKERFILE_ITER
+$(eval $(foreach link_src,$(1),$(call MAKE_LINKERFILE,$(link_src),$(2))))
+endef
+
+# MAKE_LD_ITER generate the linker scripts using the C preprocessor iteratively
+# $(1) = output linker script
+# $(2) = input template
+# $(3) = BL stage (1, 2, 2u, 31, 32)
+define MAKE_LD_ITER
+$(eval index_list=$(shell seq $(words $(1))))
+$(eval $(foreach i, $(index_list), \
+$(call MAKE_LD,$(word $(i), $(1)), $(word $(i), $(2)),$(3))))
+endef
+
+# MAKE_MODULE reference MAKE_OBJS.
+# Create module folder under out/bl$(BL)/$(module)
+# Arguments:
+# $(1) = module name
+# $(2) = source file
+# $(3) = BL stage
+define MAKE_MODULE
+ $(eval MODULE := $(strip $(1)))
+ $(eval BUILD_DIR := ${BUILD_PLAT}/${3})
+ $(eval SOURCES := $(2))
+ $(eval OBJS_TEMP := $(addprefix $(BUILD_DIR)/$(MODULE)/,$(call SOURCES_TO_OBJS,$(SOURCES))))
+ $(eval MODULE_OBJS += $(OBJS_TEMP))
+ # We use sort only to get a list of unique object directory names.
+ # ordering is not relevant but sort removes duplicates.
+ $(eval TEMP_OBJ_DIRS := $(sort $(dir ${OBJS_TEMP} ${LINKERFILE})))
+ # The $(dir ) function leaves a trailing / on the directory names
+ # Rip off the / to match directory names with make rule targets.
+ $(eval OBJ_DIRS := $(patsubst %/,%,$(TEMP_OBJ_DIRS)))
+
+$(eval $(foreach objd,${OBJ_DIRS},$(call MAKE_PREREQ_DIR,${objd},${BUILD_DIR})))
+${3}_dirs: | ${OBJ_DIRS}
+
+$(eval $(call MAKE_OBJS,$(BUILD_DIR)/$(MODULE),$(SOURCES),${3}))
+
+libraries: $(OBJS_TEMP)
+endef
+
+# Include MTK configuration files
+
+# MTK makefile variables
+MTK_PLAT := plat/mediatek
+MTK_PLAT_SOC := ${MTK_PLAT}/${MTK_SOC}
+MTK_COMMON_CFG := $(MTK_PLAT)/common/common_config.mk
+MTK_PLAT_CFG := $(MTK_PLAT_SOC)/plat_config.mk
+MTK_PROJECT_CFG := $(MTK_PLAT)/project/$(PLAT)/project_config.mk
+MTK_OPTIONS := $(MTK_PLAT)/build_helpers/options.mk
+MTK_COND_EVAL := $(MTK_PLAT)/build_helpers/conditional_eval_options.mk
+
+# Indicate which BL should be built in command line
+ifeq (${NEED_BL31},yes)
+MTK_BL := bl31
+endif
+ifeq (${NEED_BL32},yes)
+MTK_BL := bl32
+endif
+# Include common, platform, board level config
+include $(MTK_COMMON_CFG)
+include $(MTK_PLAT_CFG)
+-include $(MTK_PROJECT_CFG)
+include $(MTK_COND_EVAL)
+include $(MTK_OPTIONS)
diff --git a/plat/mediatek/build_helpers/mtk_build_helpers_epilogue.mk b/plat/mediatek/build_helpers/mtk_build_helpers_epilogue.mk
new file mode 100644
index 0000000..22a546c
--- /dev/null
+++ b/plat/mediatek/build_helpers/mtk_build_helpers_epilogue.mk
@@ -0,0 +1,30 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Expand include modules
+$(eval $(call INCLUDE_MODULES,$(MODULES-y)))
+
+# Make next section align to page size
+ifneq ($(MTK_EXTRA_LINKERFILE),)
+$(eval $(call MAKE_LINKERFILE_ITER,$(MTK_LINKERFILE_SOURCE),bl31))
+
+# EXTRA_GENERATED_LINKER_SCRIPT is a global variable of derived linker
+# script list(from MTK_LINKERFILE_SOURCE) after MAKE_LINKERFILE_ITER
+# function call
+EXTRA_LINKERFILE += ${EXTRA_GENERATED_LINKER_SCRIPT}
+
+# Expand derived linker script as build target
+$(eval $(call MAKE_LD_ITER, $(EXTRA_GENERATED_LINKER_SCRIPT),$(MTK_LINKERFILE_SOURCE),bl31))
+
+# mtk_align.ld MUST BE THE LAST LINKER SCRIPT!
+EXTRA_LINKERFILE += ${MTK_PLAT}/include/mtk_align.ld
+
+# bl31.ld should depend on EXTRA_LINKERFILE
+$(eval ${BUILD_PLAT}/bl31/bl31.ld: ${EXTRA_LINKERFILE})
+EXTRA_LINKERFILE := $(addprefix -T,$(EXTRA_LINKERFILE))
+else
+EXTRA_LINKERFILE :=
+endif
diff --git a/plat/mediatek/build_helpers/options.mk b/plat/mediatek/build_helpers/options.mk
new file mode 100644
index 0000000..394a605
--- /dev/null
+++ b/plat/mediatek/build_helpers/options.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# call add_defined_option to evaluate MTK defined value
+$(eval $(call add_defined_option,MTK_SIP_KERNEL_BOOT_ENABLE))
+$(eval $(call add_defined_option,PLAT_EXTRA_LD_SCRIPT))
+$(eval $(call add_defined_option,MTK_EXTRA_LINKERFILE))
+$(eval $(call add_defined_option,MTK_BL31_AS_BL2))
+$(eval $(call add_defined_option,MTK_BL33_IS_64BIT))
+$(eval $(call add_defined_option,PLAT_XLAT_TABLES_DYNAMIC))
+$(eval $(call add_defined_option,MTK_ADAPTED))
+$(eval $(call add_defined_option,MTK_SOC))
+$(eval $(call add_defined_option,UART_CLOCK))
+$(eval $(call add_defined_option,UART_BAUDRATE))
diff --git a/plat/qemu/common/qemu_common.c b/plat/qemu/common/qemu_common.c
index 47ec791..0c184f4 100644
--- a/plat/qemu/common/qemu_common.c
+++ b/plat/qemu/common/qemu_common.c
@@ -1,6 +1,6 @@
/*
- * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -11,6 +11,7 @@
#include <common/bl_common.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
+#include <plat/common/platform.h>
#include "qemu_private.h"
#define MAP_DEVICE0 MAP_REGION_FLAT(DEVICE0_BASE, \
@@ -160,4 +161,9 @@
DEFINE_CONFIGURE_MMU_EL(svc_mon)
#endif
-
+#if MEASURED_BOOT || TRUSTED_BOARD_BOOT
+int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size)
+{
+ return get_mbedtls_heap_helper(heap_addr, heap_size);
+}
+#endif
diff --git a/plat/qemu/common/qemu_private.h b/plat/qemu/common/qemu_private.h
index 4dc62f5..c313cb6 100644
--- a/plat/qemu/common/qemu_private.h
+++ b/plat/qemu/common/qemu_private.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -34,4 +34,18 @@
void qemu_pwr_gic_on_finish(void);
void qemu_pwr_gic_off(void);
+int qemu_set_tos_fw_info(uintptr_t config_base, uintptr_t log_addr,
+ size_t log_size);
+
+int qemu_set_nt_fw_info(
+/*
+ * Currently OP-TEE does not support reading DTBs from Secure memory
+ * and this option should be removed when feature is supported.
+ */
+#ifdef SPD_opteed
+ uintptr_t log_addr,
+#endif
+ size_t log_size,
+ uintptr_t *ns_log_addr);
+
#endif /* QEMU_PRIVATE_H */
diff --git a/plat/qemu/common/qemu_trusted_boot.c b/plat/qemu/common/qemu_trusted_boot.c
index 1ef7e43..6a8edca 100644
--- a/plat/qemu/common/qemu_trusted_boot.c
+++ b/plat/qemu/common/qemu_trusted_boot.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -29,8 +29,3 @@
{
return 1;
}
-
-int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size)
-{
- return get_mbedtls_heap_helper(heap_addr, heap_size);
-}
diff --git a/plat/qemu/qemu/include/platform_def.h b/plat/qemu/qemu/include/platform_def.h
index c02eff9..78467c4 100644
--- a/plat/qemu/qemu/include/platform_def.h
+++ b/plat/qemu/qemu/include/platform_def.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -270,4 +270,9 @@
*/
#define SYS_COUNTER_FREQ_IN_TICKS ((1000 * 1000 * 1000) / 16)
+/*
+ * Maximum size of Event Log buffer used in Measured Boot Event Log driver
+ */
+#define PLAT_EVENT_LOG_MAX_SIZE UL(0x400)
+
#endif /* PLATFORM_DEF_H */
diff --git a/plat/qemu/qemu/platform.mk b/plat/qemu/qemu/platform.mk
index a8f978a..6a877c3 100644
--- a/plat/qemu/qemu/platform.mk
+++ b/plat/qemu/qemu/platform.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2013-2021, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2013-2022, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -57,11 +57,7 @@
ifneq (${TRUSTED_BOARD_BOOT},0)
- include drivers/auth/mbedtls/mbedtls_crypto.mk
- include drivers/auth/mbedtls/mbedtls_x509.mk
-
AUTH_SOURCES := drivers/auth/auth_mod.c \
- drivers/auth/crypto_mod.c \
drivers/auth/img_parser_mod.c \
drivers/auth/tbbr/tbbr_cot_common.c
@@ -78,6 +74,8 @@
$(PLAT_QEMU_COMMON_PATH)/qemu_rotpk.S \
drivers/auth/tbbr/tbbr_cot_bl2.c
+ include drivers/auth/mbedtls/mbedtls_x509.mk
+
ROT_KEY = $(BUILD_PLAT)/rot_key.pem
ROTPK_HASH = $(BUILD_PLAT)/rotpk_sha256.bin
@@ -98,6 +96,34 @@
openssl dgst -sha256 -binary > $@ 2>/dev/null
endif
+# Include Measured Boot makefile before any Crypto library makefile.
+# Crypto library makefile may need default definitions of Measured Boot build
+# flags present in Measured Boot makefile.
+ifeq (${MEASURED_BOOT},1)
+ MEASURED_BOOT_MK := drivers/measured_boot/event_log/event_log.mk
+ $(info Including ${MEASURED_BOOT_MK})
+ include ${MEASURED_BOOT_MK}
+
+ BL2_SOURCES += plat/qemu/qemu/qemu_measured_boot.c \
+ plat/qemu/qemu/qemu_common_measured_boot.c \
+ plat/qemu/qemu/qemu_helpers.c \
+ ${EVENT_LOG_SOURCES}
+
+ BL1_SOURCES += plat/qemu/qemu/qemu_bl1_measured_boot.c
+
+endif
+
+ifneq ($(filter 1,${MEASURED_BOOT} ${TRUSTED_BOARD_BOOT}),)
+ CRYPTO_SOURCES := drivers/auth/crypto_mod.c
+
+ BL1_SOURCES += ${CRYPTO_SOURCES}
+ BL2_SOURCES += ${CRYPTO_SOURCES}
+
+ # We expect to locate the *.mk files under the directories specified below
+ #
+ include drivers/auth/mbedtls/mbedtls_crypto.mk
+endif
+
BL1_SOURCES += drivers/io/io_semihosting.c \
drivers/io/io_storage.c \
drivers/io/io_fip.c \
@@ -131,6 +157,7 @@
${PLAT_QEMU_COMMON_PATH}/qemu_bl2_mem_params_desc.c \
${PLAT_QEMU_COMMON_PATH}/qemu_image_load.c \
common/fdt_fixup.c \
+ common/fdt_wrappers.c \
common/desc_image_load.c
ifeq ($(add-lib-optee),yes)
diff --git a/plat/qemu/qemu/qemu_bl1_measured_boot.c b/plat/qemu/qemu/qemu_bl1_measured_boot.c
new file mode 100644
index 0000000..3d20f97
--- /dev/null
+++ b/plat/qemu/qemu/qemu_bl1_measured_boot.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+#include <common/desc_image_load.h>
+
+/*
+ * Add dummy functions for measured boot for BL1.
+ * In most of the SoC's, ROM/BL1 code is pre-built. So we are assumimg that
+ * it doesn't have the capability to do measurements and extend eventlog.
+ * hence these are dummy functions.
+ */
+void bl1_plat_mboot_init(void)
+{
+}
+
+void bl1_plat_mboot_finish(void)
+{
+}
+
+int plat_mboot_measure_image(unsigned int image_id, image_info_t *image_data)
+{
+ return 0;
+}
diff --git a/plat/qemu/qemu/qemu_common_measured_boot.c b/plat/qemu/qemu/qemu_common_measured_boot.c
new file mode 100644
index 0000000..41f7f87
--- /dev/null
+++ b/plat/qemu/qemu/qemu_common_measured_boot.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2022, Linaro.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <stdint.h>
+
+#include <common/desc_image_load.h>
+#include <drivers/measured_boot/event_log/event_log.h>
+#include <plat/common/platform.h>
+
+extern event_log_metadata_t qemu_event_log_metadata[];
+
+const event_log_metadata_t *plat_event_log_get_metadata(void)
+{
+ return qemu_event_log_metadata;
+}
+
+int plat_mboot_measure_image(unsigned int image_id, image_info_t *image_data)
+{
+ /* Calculate image hash and record data in Event Log */
+ int err = event_log_measure_and_record(image_data->image_base,
+ image_data->image_size,
+ image_id);
+ if (err != 0) {
+ ERROR("%s%s image id %u (%i)\n",
+ "Failed to ", "record", image_id, err);
+ return err;
+ }
+
+ return 0;
+}
diff --git a/plat/qemu/qemu/qemu_helpers.c b/plat/qemu/qemu/qemu_helpers.c
new file mode 100644
index 0000000..01b8249
--- /dev/null
+++ b/plat/qemu/qemu/qemu_helpers.c
@@ -0,0 +1,214 @@
+/*
+ * Copyright (c) 2022, Linaro.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#if MEASURED_BOOT
+#include <common/desc_image_load.h>
+#endif
+#include <common/fdt_wrappers.h>
+
+#include <libfdt.h>
+
+#ifdef SPD_opteed
+/*
+ * Currently OP-TEE does not support reading DTBs from Secure memory
+ * and this property should be removed when this feature is supported.
+ */
+#define DTB_PROP_HW_SM_LOG_ADDR "tpm_event_log_sm_addr"
+#endif
+
+#define DTB_PROP_HW_LOG_ADDR "tpm_event_log_addr"
+#define DTB_PROP_HW_LOG_SIZE "tpm_event_log_size"
+
+#if MEASURED_BOOT
+
+#ifdef SPD_opteed
+int qemu_set_tee_fw_info(uintptr_t config_base, uintptr_t log_addr,
+ size_t log_size)
+{
+ int offs, err = 0;
+ void *dtb = (void *)config_base;
+ const char *compatible = "arm,tpm_event_log";
+ uint64_t sec_base = cpu_to_fdt64(log_addr);
+ uint32_t sz = cpu_to_fdt32(log_size);
+
+ offs = fdtw_find_or_add_subnode(dtb, 0, "tpm-event-log");
+ if (offs < 0) {
+ ERROR("Failed to add node tpm-event-log %d\n", offs);
+ return offs;
+ }
+
+ if (fdt_appendprop(dtb, offs, "compatible", compatible,
+ strlen(compatible) + 1) < 0) {
+ return -1;
+ }
+
+ err = fdt_setprop(dtb, offs, DTB_PROP_HW_SM_LOG_ADDR, &sec_base, 8);
+ if (err < 0) {
+ ERROR("Failed to add log addr err %d\n", err);
+ return err;
+ }
+
+ err = fdt_setprop(dtb, offs, DTB_PROP_HW_LOG_SIZE, &sz, 4);
+ if (err < 0) {
+ ERROR("Failed to add log addr err %d\n", err);
+ return err;
+ }
+
+ return err;
+}
+#endif
+
+/*
+ * Write the Event Log address and its size in the DTB.
+ *
+ * This function is supposed to be called only by BL2.
+ *
+ * Returns:
+ * 0 = success
+ * < 0 = error
+ */
+static int qemu_set_event_log_info(uintptr_t config_base,
+#ifdef SPD_opteed
+ uintptr_t sm_log_addr,
+#endif
+ uintptr_t log_addr, size_t log_size)
+{
+ /* As libfdt uses void *, we can't avoid this cast */
+ void *dtb = (void *)config_base;
+ const char *compatible_tpm = "tcg,tpm-tis-mmio";
+ uint64_t base = cpu_to_fdt64(log_addr);
+ uint32_t sz = cpu_to_fdt32(log_size);
+ int err, node;
+
+ err = fdt_open_into(dtb, dtb, PLAT_QEMU_DT_MAX_SIZE);
+ if (err < 0) {
+ ERROR("Invalid Device Tree at %p: error %d\n", dtb, err);
+ return err;
+ }
+
+ /*
+ * Verify that the DTB is valid, before attempting to write to it,
+ * and get the DTB root node.
+ */
+
+ /* Check if the pointer to DT is correct */
+ err = fdt_check_header(dtb);
+ if (err < 0) {
+ WARN("Invalid DTB file passed\n");
+ return err;
+ }
+
+ /*
+ * Find the TPM node in device tree. On qemu, we assume it will
+ * be sw-tpm.
+ */
+ node = fdt_node_offset_by_compatible(dtb, -1, compatible_tpm);
+ if (node < 0) {
+ ERROR("The compatible property '%s' not%s", compatible_tpm,
+ " found in the config\n");
+ return node;
+ }
+
+ err = fdt_setprop(dtb, node, DTB_PROP_HW_LOG_ADDR, &base, 8);
+ if (err < 0) {
+ ERROR("Failed to add log addr err %d\n", err);
+ return err;
+ }
+
+ err = fdt_setprop(dtb, node, DTB_PROP_HW_LOG_SIZE, &sz, 4);
+ if (err < 0) {
+ ERROR("Failed to add log addr err %d\n", err);
+ return err;
+ }
+
+#ifdef SPD_opteed
+ err = qemu_set_tee_fw_info(config_base, sm_log_addr, log_size);
+ if (err < 0) {
+ ERROR("Failed to add tpm-event-node at %p: err %d\n", dtb, err);
+ return err;
+ }
+#endif
+
+ err = fdt_pack(dtb);
+ if (err < 0) {
+ ERROR("Failed to pack Device Tree at %p: err %d\n", dtb, err);
+ return err;
+ }
+
+ /*
+ * Ensure that the info written to the DTB is visible
+ * to other images.
+ */
+ flush_dcache_range(config_base, fdt_totalsize(dtb));
+
+ return err;
+}
+
+/*
+ * This function writes the Event Log address and its size
+ * in the TOS_FW_CONFIG DTB.
+ *
+ * This function is supposed to be called only by BL2.
+ *
+ * Returns:
+ * 0 = success
+ * < 0 = error
+ */
+int qemu_set_tos_fw_info(uintptr_t config_base, uintptr_t log_addr,
+ size_t log_size)
+{
+ int err = 0;
+
+ assert(config_base != 0UL);
+ assert(log_addr != 0UL);
+
+ /*
+ * FIXME - add code to add/update Log address and it's
+ * size in TOS FW CONFIG.
+ * For now we don't have support for TOS FW config in OP-TEE.
+ * So leave this function blank
+ */
+
+ return err;
+}
+
+/*
+ * This function writes the Event Log address and its size
+ * in the QEMU DTB.
+ *
+ * This function is supposed to be called only by BL2.
+ *
+ * Returns:
+ * 0 = success
+ * < 0 = error
+ */
+int qemu_set_nt_fw_info(
+#ifdef SPD_opteed
+ uintptr_t log_addr,
+#endif
+ size_t log_size, uintptr_t *ns_log_addr)
+{
+ uintptr_t ns_addr;
+ int err;
+
+ assert(ns_log_addr != NULL);
+
+ ns_addr = PLAT_QEMU_DT_BASE + PLAT_QEMU_DT_MAX_SIZE;
+
+ /* Write the Event Log address and its size in the DTB */
+ err = qemu_set_event_log_info(PLAT_QEMU_DT_BASE,
+#ifdef SPD_opteed
+ log_addr,
+#endif
+ ns_addr, log_size);
+
+ /* Return Event Log address in Non-secure memory */
+ *ns_log_addr = (err < 0) ? 0UL : ns_addr;
+ return err;
+}
+#endif /* MEASURED_BOOT */
diff --git a/plat/qemu/qemu/qemu_measured_boot.c b/plat/qemu/qemu/qemu_measured_boot.c
new file mode 100644
index 0000000..d9e475a
--- /dev/null
+++ b/plat/qemu/qemu/qemu_measured_boot.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <drivers/measured_boot/event_log/event_log.h>
+#include <plat/common/common_def.h>
+#include <tools_share/tbbr_oid.h>
+
+#include "../common/qemu_private.h"
+
+/* Event Log data */
+static uint8_t event_log[PLAT_EVENT_LOG_MAX_SIZE];
+static uint64_t event_log_base;
+
+/* FVP table with platform specific image IDs, names and PCRs */
+const event_log_metadata_t qemu_event_log_metadata[] = {
+ { BL31_IMAGE_ID, EVLOG_BL31_STRING, PCR_0 },
+ { BL32_IMAGE_ID, EVLOG_BL32_STRING, PCR_0 },
+ { BL32_EXTRA1_IMAGE_ID, EVLOG_BL32_EXTRA1_STRING, PCR_0 },
+ { BL32_EXTRA2_IMAGE_ID, EVLOG_BL32_EXTRA2_STRING, PCR_0 },
+ { BL33_IMAGE_ID, EVLOG_BL33_STRING, PCR_0 },
+ { HW_CONFIG_ID, EVLOG_HW_CONFIG_STRING, PCR_0 },
+ { NT_FW_CONFIG_ID, EVLOG_NT_FW_CONFIG_STRING, PCR_0 },
+ { SCP_BL2_IMAGE_ID, EVLOG_SCP_BL2_STRING, PCR_0 },
+ { SOC_FW_CONFIG_ID, EVLOG_SOC_FW_CONFIG_STRING, PCR_0 },
+ { TOS_FW_CONFIG_ID, EVLOG_TOS_FW_CONFIG_STRING, PCR_0 },
+
+ { EVLOG_INVALID_ID, NULL, (unsigned int)(-1) } /* Terminator */
+};
+
+void bl2_plat_mboot_init(void)
+{
+ /*
+ * Here we assume that BL1/ROM code doesn't have the driver
+ * to measure the BL2 code which is a common case for
+ * already existing platforms
+ */
+ event_log_init(event_log, event_log + sizeof(event_log));
+ event_log_write_header();
+
+ /*
+ * TBD - Add code to do self measurement of BL2 code and add an
+ * event for BL2 measurement
+ */
+
+ event_log_base = (uintptr_t)event_log;
+}
+
+void bl2_plat_mboot_finish(void)
+{
+ int rc;
+
+ /* Event Log address in Non-Secure memory */
+ uintptr_t ns_log_addr;
+
+ /* Event Log filled size */
+ size_t event_log_cur_size;
+
+ event_log_cur_size = event_log_get_cur_size((uint8_t *)event_log_base);
+
+ rc = qemu_set_nt_fw_info(
+#ifdef SPD_opteed
+ (uintptr_t)event_log_base,
+#endif
+ event_log_cur_size, &ns_log_addr);
+ if (rc != 0) {
+ ERROR("%s(): Unable to update %s_FW_CONFIG\n",
+ __func__, "NT");
+ /*
+ * It is a fatal error because on QEMU secure world software
+ * assumes that a valid event log exists and will use it to
+ * record the measurements into the fTPM or sw-tpm.
+ * Note: In QEMU platform, OP-TEE uses nt_fw_config to get the
+ * secure Event Log buffer address.
+ */
+ panic();
+ }
+
+ /* Copy Event Log to Non-secure memory */
+ (void)memcpy((void *)ns_log_addr, (const void *)event_log_base,
+ event_log_cur_size);
+
+ /* Ensure that the Event Log is visible in Non-secure memory */
+ flush_dcache_range(ns_log_addr, event_log_cur_size);
+
+#if defined(SPD_tspd) || defined(SPD_spmd)
+ /* Set Event Log data in TOS_FW_CONFIG */
+ rc = qemu_set_tos_fw_info((uintptr_t)event_log_base,
+ event_log_cur_size);
+ if (rc != 0) {
+ ERROR("%s(): Unable to update %s_FW_CONFIG\n",
+ __func__, "TOS");
+ panic();
+ }
+#endif /* defined(SPD_tspd) || defined(SPD_spmd) */
+
+ dump_event_log((uint8_t *)event_log_base, event_log_cur_size);
+}
diff --git a/plat/ti/k3/board/lite/include/board_def.h b/plat/ti/k3/board/lite/include/board_def.h
index 18b7f42..fd4e5b1 100644
--- a/plat/ti/k3/board/lite/include/board_def.h
+++ b/plat/ti/k3/board/lite/include/board_def.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -33,7 +33,7 @@
* defined as default for our platform.
*/
#define SEC_SRAM_BASE UL(0x00000000) /* PIE remapped on fly */
-#define SEC_SRAM_SIZE UL(0x0001c000) /* 112k */
+#define SEC_SRAM_SIZE UL(0x00020000) /* 128k */
#define PLAT_MAX_OFF_STATE U(2)
#define PLAT_MAX_RET_STATE U(1)
diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci.c b/plat/ti/k3/common/drivers/ti_sci/ti_sci.c
index 2c3313c..2cbfa3d 100644
--- a/plat/ti/k3/common/drivers/ti_sci/ti_sci.c
+++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci.c
@@ -2,7 +2,7 @@
* Texas Instruments System Control Interface Driver
* Based on Linux and U-Boot implementation
*
- * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -1664,6 +1664,57 @@
}
/**
+ * ti_sci_enter_sleep - Command to initiate system transition into suspend.
+ *
+ * @proc_id: Processor ID.
+ * @mode: Low power mode to enter.
+ * @core_resume_addr: Address that core should be
+ * resumed from after low power transition.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_enter_sleep(uint8_t proc_id,
+ uint8_t mode,
+ uint64_t core_resume_addr)
+{
+ struct ti_sci_msg_req_enter_sleep req;
+ struct ti_sci_msg_hdr *hdr;
+ struct k3_sec_proxy_msg tx_message;
+ int ret;
+
+ /* Ensure we have sane transfer size */
+ if (sizeof(req) > TI_SCI_MAX_MESSAGE_SIZE) {
+ return -ERANGE;
+ }
+
+ hdr = (struct ti_sci_msg_hdr *)&req;
+ hdr->seq = ++message_sequence;
+ hdr->type = TI_SCI_MSG_ENTER_SLEEP;
+ hdr->host = TI_SCI_HOST_ID;
+ /* Setup with NORESPONSE flag to keep response queue clean */
+ hdr->flags = TI_SCI_FLAG_REQ_GENERIC_NORESPONSE;
+
+ req.processor_id = proc_id;
+ req.mode = mode;
+ req.core_resume_lo = core_resume_addr & TISCI_ADDR_LOW_MASK;
+ req.core_resume_hi = (core_resume_addr & TISCI_ADDR_HIGH_MASK) >>
+ TISCI_ADDR_HIGH_SHIFT;
+
+ tx_message.buf = (uint8_t *)&req;
+ tx_message.len = sizeof(req);
+
+ /* Send message */
+ ret = k3_sec_proxy_send(SP_HIGH_PRIORITY, &tx_message);
+ if (ret != 0) {
+ ERROR("Message sending failed (%d)\n", ret);
+ return ret;
+ }
+
+ /* Return without waiting for response */
+ return 0;
+}
+
+/**
* ti_sci_init() - Basic initialization
*
* Return: 0 if all goes well, else appropriate error message
diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci.h b/plat/ti/k3/common/drivers/ti_sci/ti_sci.h
index c7b09b3..06944a7 100644
--- a/plat/ti/k3/common/drivers/ti_sci/ti_sci.h
+++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci.h
@@ -2,7 +2,7 @@
* Texas Instruments System Control Interface API
* Based on Linux and U-Boot implementation
*
- * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -207,6 +207,22 @@
uint32_t status_flags_1_clr_any_wait);
/**
+ * System Low Power Operations
+ *
+ * - ti_sci_enter_sleep - Command to initiate system transition into suspend.
+ * @proc_id: Processor ID.
+ * @mode: Low power mode to enter.
+ * @core_resume_addr: Address that core should be resumed from
+ * after low power transition.
+ *
+ * NOTE: for all these functions, the following are generic in nature:
+ * Returns 0 for successful request, else returns corresponding error message.
+ */
+int ti_sci_enter_sleep(uint8_t proc_id,
+ uint8_t mode,
+ uint64_t core_resume_addr);
+
+/**
* ti_sci_init() - Basic initialization
*
* Return: 0 if all goes good, else appropriate error message.
diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci_protocol.h b/plat/ti/k3/common/drivers/ti_sci/ti_sci_protocol.h
index 310bf45..d220612 100644
--- a/plat/ti/k3/common/drivers/ti_sci/ti_sci_protocol.h
+++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci_protocol.h
@@ -5,7 +5,7 @@
* The system works in a message response protocol
* See: http://processors.wiki.ti.com/index.php/TISCI for details
*
- * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -28,6 +28,9 @@
#define TI_SCI_MSG_GET_DEVICE_STATE 0x0201
#define TI_SCI_MSG_SET_DEVICE_RESETS 0x0202
+/* Low Power Mode Requests */
+#define TI_SCI_MSG_ENTER_SLEEP 0x0301
+
/* Clock requests */
#define TI_SCI_MSG_SET_CLOCK_STATE 0x0100
#define TI_SCI_MSG_GET_CLOCK_STATE 0x0101
@@ -706,4 +709,26 @@
uint32_t status_flags_1_clr_any_wait;
} __packed;
+/**
+ * struct ti_sci_msg_req_enter_sleep - Request for TI_SCI_MSG_ENTER_SLEEP.
+ *
+ * @hdr Generic Header
+ * @mode Low power mode to enter.
+ * @proc_id Processor id to be restored.
+ * @core_resume_lo Low 32-bits of physical pointer to address for core
+ * to begin execution upon resume.
+ * @core_resume_hi High 32-bits of physical pointer to address for core
+ * to begin execution upon resume.
+ *
+ * This message is to be sent after TI_SCI_MSG_PREPARE_SLEEP is sent from OS
+ * and is what actually triggers entry into the specified low power mode.
+ */
+struct ti_sci_msg_req_enter_sleep {
+ struct ti_sci_msg_hdr hdr;
+ uint8_t mode;
+ uint8_t processor_id;
+ uint32_t core_resume_lo;
+ uint32_t core_resume_hi;
+} __packed;
+
#endif /* TI_SCI_PROTOCOL_H */
diff --git a/plat/ti/k3/common/k3_gicv3.c b/plat/ti/k3/common/k3_gicv3.c
index 1932eaa..0199822 100644
--- a/plat/ti/k3/common/k3_gicv3.c
+++ b/plat/ti/k3/common/k3_gicv3.c
@@ -19,6 +19,11 @@
/* The GICv3 driver only needs to be initialized in EL3 */
uintptr_t rdistif_base_addrs[PLATFORM_CORE_COUNT];
+#if K3_PM_SYSTEM_SUSPEND
+static gicv3_redist_ctx_t rdist_ctx[PLATFORM_CORE_COUNT];
+static gicv3_dist_ctx_t dist_ctx;
+#endif
+
static const interrupt_prop_t k3_interrupt_props[] = {
PLAT_ARM_G1S_IRQ_PROPS(INTR_GROUP1S),
PLAT_ARM_G0_IRQ_PROPS(INTR_GROUP0)
@@ -88,3 +93,21 @@
{
gicv3_rdistif_init(plat_my_core_pos());
}
+
+#if K3_PM_SYSTEM_SUSPEND
+void k3_gic_save_context(void)
+{
+ for (unsigned int i = 0U; i < PLATFORM_CORE_COUNT; i++) {
+ gicv3_rdistif_save(i, &rdist_ctx[i]);
+ }
+ gicv3_distif_save(&dist_ctx);
+}
+
+void k3_gic_restore_context(void)
+{
+ gicv3_distif_init_restore(&dist_ctx);
+ for (unsigned int i = 0U; i < PLATFORM_CORE_COUNT; i++) {
+ gicv3_rdistif_init_restore(i, &rdist_ctx[i]);
+ }
+}
+#endif
diff --git a/plat/ti/k3/common/k3_psci.c b/plat/ti/k3/common/k3_psci.c
index 0500740..6febbc6 100644
--- a/plat/ti/k3/common/k3_psci.c
+++ b/plat/ti/k3/common/k3_psci.c
@@ -234,11 +234,50 @@
return PSCI_E_SUCCESS;
}
+#if K3_PM_SYSTEM_SUSPEND
+static void k3_pwr_domain_suspend(const psci_power_state_t *target_state)
+{
+ unsigned int core, proc_id;
+
+ core = plat_my_core_pos();
+ proc_id = PLAT_PROC_START_ID + core;
+
+ /* Prevent interrupts from spuriously waking up this cpu */
+ k3_gic_cpuif_disable();
+ k3_gic_save_context();
+
+ k3_pwr_domain_off(target_state);
+
+ ti_sci_enter_sleep(proc_id, 0, k3_sec_entrypoint);
+}
+
+static void k3_pwr_domain_suspend_finish(const psci_power_state_t *target_state)
+{
+ k3_gic_restore_context();
+ k3_gic_cpuif_enable();
+}
+
+static void k3_get_sys_suspend_power_state(psci_power_state_t *req_state)
+{
+ unsigned int i;
+
+ /* CPU & cluster off, system in retention */
+ for (i = MPIDR_AFFLVL0; i <= PLAT_MAX_PWR_LVL; i++) {
+ req_state->pwr_domain_state[i] = PLAT_MAX_OFF_STATE;
+ }
+}
+#endif
+
static const plat_psci_ops_t k3_plat_psci_ops = {
.cpu_standby = k3_cpu_standby,
.pwr_domain_on = k3_pwr_domain_on,
.pwr_domain_off = k3_pwr_domain_off,
.pwr_domain_on_finish = k3_pwr_domain_on_finish,
+#if K3_PM_SYSTEM_SUSPEND
+ .pwr_domain_suspend = k3_pwr_domain_suspend,
+ .pwr_domain_suspend_finish = k3_pwr_domain_suspend_finish,
+ .get_sys_suspend_power_state = k3_get_sys_suspend_power_state,
+#endif
.system_off = k3_system_off,
.system_reset = k3_system_reset,
.validate_power_state = k3_validate_power_state,
diff --git a/plat/ti/k3/common/plat_common.mk b/plat/ti/k3/common/plat_common.mk
index ab7366b..e299c30 100644
--- a/plat/ti/k3/common/plat_common.mk
+++ b/plat/ti/k3/common/plat_common.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2017-2022, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -45,6 +45,10 @@
K3_USART_BAUD := 115200
$(eval $(call add_define,K3_USART_BAUD))
+# Enable system suspend modes
+K3_PM_SYSTEM_SUSPEND := 0
+$(eval $(call add_define,K3_PM_SYSTEM_SUSPEND))
+
# Libraries
include lib/xlat_tables_v2/xlat_tables.mk
diff --git a/plat/ti/k3/include/k3_gicv3.h b/plat/ti/k3/include/k3_gicv3.h
index 2329a16..2c68a75 100644
--- a/plat/ti/k3/include/k3_gicv3.h
+++ b/plat/ti/k3/include/k3_gicv3.h
@@ -14,5 +14,7 @@
void k3_gic_cpuif_enable(void);
void k3_gic_cpuif_disable(void);
void k3_gic_pcpu_init(void);
+void k3_gic_save_context(void);
+void k3_gic_restore_context(void);
#endif /* K3_GICV3_H */