fix(imx8m): move caam init after serial init
CAAM provides serial output during initialization, but the serial init
occurs after CAAM. This leads to serial output produced by CAAM init
function to be omitted and not displayed.
Change the order of initialization and call CAAM init after Serial. This
has no impact as Serial does not require CAAM to be initialized upfront.
Fixes: 2502709f60de ("plat: imx8m: Add caam module init on imx8m")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Jacky Bai <ping.bai@nxp.com>
Change-Id: I09c0a5474a1babfb0b53c4455891689ec08b5bdb
diff --git a/plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c b/plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c
index ba0db0c..1667baf 100644
--- a/plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c
+++ b/plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c
@@ -134,13 +134,13 @@
imx_csu_init(csu_cfg);
- imx8m_caam_init();
-
console_imx_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
IMX_CONSOLE_BAUDRATE, &console);
/* This console is only used for boot stage */
console_set_scope(&console, CONSOLE_FLAG_BOOT);
+ imx8m_caam_init();
+
/*
* tell BL3-1 where the non-secure software image is located
* and the entry state information.
diff --git a/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c b/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c
index 5d2a64e..464c87d 100644
--- a/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c
+++ b/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c
@@ -139,13 +139,13 @@
val = mmio_read_32(IMX_IOMUX_GPR_BASE + 0x2c);
mmio_write_32(IMX_IOMUX_GPR_BASE + 0x2c, val | 0x3DFF0000);
- imx8m_caam_init();
-
console_imx_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
IMX_CONSOLE_BAUDRATE, &console);
/* This console is only used for boot stage */
console_set_scope(&console, CONSOLE_FLAG_BOOT);
+ imx8m_caam_init();
+
/*
* tell BL3-1 where the non-secure software image is located
* and the entry state information.
diff --git a/plat/imx/imx8m/imx8mp/imx8mp_bl31_setup.c b/plat/imx/imx8m/imx8mp/imx8mp_bl31_setup.c
index d443c3d..34631b8 100644
--- a/plat/imx/imx8m/imx8mp/imx8mp_bl31_setup.c
+++ b/plat/imx/imx8m/imx8mp/imx8mp_bl31_setup.c
@@ -135,13 +135,13 @@
val = mmio_read_32(IMX_IOMUX_GPR_BASE + 0x2c);
mmio_write_32(IMX_IOMUX_GPR_BASE + 0x2c, val | 0x3DFF0000);
- imx8m_caam_init();
-
console_imx_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
IMX_CONSOLE_BAUDRATE, &console);
/* This console is only used for boot stage */
console_set_scope(&console, CONSOLE_FLAG_BOOT);
+ imx8m_caam_init();
+
/*
* tell BL3-1 where the non-secure software image is located
* and the entry state information.
diff --git a/plat/imx/imx8m/imx8mq/imx8mq_bl31_setup.c b/plat/imx/imx8m/imx8mq/imx8mq_bl31_setup.c
index e998a16..59c3779 100644
--- a/plat/imx/imx8m/imx8mq/imx8mq_bl31_setup.c
+++ b/plat/imx/imx8m/imx8mq/imx8mq_bl31_setup.c
@@ -132,14 +132,15 @@
imx_aipstz_init(aipstz);
- imx8m_caam_init();
-
#if DEBUG_CONSOLE
static console_t console;
console_imx_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
IMX_CONSOLE_BAUDRATE, &console);
#endif
+
+ imx8m_caam_init();
+
/*
* tell BL3-1 where the non-secure software image is located
* and the entry state information.