diff --git a/fdts/stm32mp15-ddr.dtsi b/fdts/stm32mp15-ddr.dtsi
new file mode 100644
index 0000000..be4e2c3
--- /dev/null
+++ b/fdts/stm32mp15-ddr.dtsi
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+/ {
+	soc {
+		ddr: ddr@0x5A003000{
+
+			compatible = "st,stm32mp1-ddr";
+
+			reg = <0x5A003000 0x550
+			       0x5A004000 0x234>;
+
+			clocks = <&rcc AXIDCG>,
+				 <&rcc DDRC1>,
+				 <&rcc DDRC2>,
+				 <&rcc DDRPHYC>,
+				 <&rcc DDRCAPB>,
+				 <&rcc DDRPHYCAPB>;
+
+			clock-names = "axidcg",
+				      "ddrc1",
+				      "ddrc2",
+				      "ddrphyc",
+				      "ddrcapb",
+				      "ddrphycapb";
+
+			st,mem-name = DDR_MEM_NAME;
+			st,mem-speed = <DDR_MEM_SPEED>;
+			st,mem-size = <DDR_MEM_SIZE>;
+
+			st,ctl-reg = <
+				DDR_MSTR
+				DDR_MRCTRL0
+				DDR_MRCTRL1
+				DDR_DERATEEN
+				DDR_DERATEINT
+				DDR_PWRCTL
+				DDR_PWRTMG
+				DDR_HWLPCTL
+				DDR_RFSHCTL0
+				DDR_RFSHCTL3
+				DDR_CRCPARCTL0
+				DDR_ZQCTL0
+				DDR_DFITMG0
+				DDR_DFITMG1
+				DDR_DFILPCFG0
+				DDR_DFIUPD0
+				DDR_DFIUPD1
+				DDR_DFIUPD2
+				DDR_DFIPHYMSTR
+				DDR_ODTMAP
+				DDR_DBG0
+				DDR_DBG1
+				DDR_DBGCMD
+				DDR_POISONCFG
+				DDR_PCCFG
+			>;
+
+			st,ctl-timing = <
+				DDR_RFSHTMG
+				DDR_DRAMTMG0
+				DDR_DRAMTMG1
+				DDR_DRAMTMG2
+				DDR_DRAMTMG3
+				DDR_DRAMTMG4
+				DDR_DRAMTMG5
+				DDR_DRAMTMG6
+				DDR_DRAMTMG7
+				DDR_DRAMTMG8
+				DDR_DRAMTMG14
+				DDR_ODTCFG
+			>;
+
+			st,ctl-map = <
+				DDR_ADDRMAP1
+				DDR_ADDRMAP2
+				DDR_ADDRMAP3
+				DDR_ADDRMAP4
+				DDR_ADDRMAP5
+				DDR_ADDRMAP6
+				DDR_ADDRMAP9
+				DDR_ADDRMAP10
+				DDR_ADDRMAP11
+			>;
+
+			st,ctl-perf = <
+				DDR_SCHED
+				DDR_SCHED1
+				DDR_PERFHPR1
+				DDR_PERFLPR1
+				DDR_PERFWR1
+				DDR_PCFGR_0
+				DDR_PCFGW_0
+				DDR_PCFGQOS0_0
+				DDR_PCFGQOS1_0
+				DDR_PCFGWQOS0_0
+				DDR_PCFGWQOS1_0
+				DDR_PCFGR_1
+				DDR_PCFGW_1
+				DDR_PCFGQOS0_1
+				DDR_PCFGQOS1_1
+				DDR_PCFGWQOS0_1
+				DDR_PCFGWQOS1_1
+			>;
+
+			st,phy-reg = <
+				DDR_PGCR
+				DDR_ACIOCR
+				DDR_DXCCR
+				DDR_DSGCR
+				DDR_DCR
+				DDR_ODTCR
+				DDR_ZQ0CR1
+				DDR_DX0GCR
+				DDR_DX1GCR
+				DDR_DX2GCR
+				DDR_DX3GCR
+			>;
+
+			st,phy-timing = <
+				DDR_PTR0
+				DDR_PTR1
+				DDR_PTR2
+				DDR_DTPR0
+				DDR_DTPR1
+				DDR_DTPR2
+				DDR_MR0
+				DDR_MR1
+				DDR_MR2
+				DDR_MR3
+			>;
+
+			st,phy-cal = <
+				DDR_DX0DLLCR
+				DDR_DX0DQTR
+				DDR_DX0DQSTR
+				DDR_DX1DLLCR
+				DDR_DX1DQTR
+				DDR_DX1DQSTR
+				DDR_DX2DLLCR
+				DDR_DX2DQTR
+				DDR_DX2DQSTR
+				DDR_DX3DLLCR
+				DDR_DX3DQTR
+				DDR_DX3DQSTR
+			>;
+
+			status = "okay";
+		};
+	};
+};
diff --git a/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
new file mode 100644
index 0000000..58a4cdc
--- /dev/null
+++ b/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+/* STM32MP157C ED1 and ED2 BOARD configuration
+ * 2x DDR3L 4Gb each, 16-bit, 533MHz, Single Die Package in flyby topology.
+ * Reference used NT5CC256M16DP-DI from NANYA
+ *
+ * DDR type / Platform	DDR3/3L
+ * freq		533MHz
+ * width	32
+ * datasheet	0  = MT41J256M16-187 / DDR3-1066 bin G
+ * DDR density	8
+ * timing mode	optimized
+ * Scheduling/QoS options : type = 2
+ * address mapping : RBC
+ */
+
+#define DDR_MEM_NAME "DDR3-1066 bin G 2x4Gb 533MHz v1.39"
+#define DDR_MEM_SPEED 533
+#define DDR_MEM_SIZE 0x40000000
+
+#define DDR_MSTR 0x00040401
+#define DDR_MRCTRL0 0x00000010
+#define DDR_MRCTRL1 0x00000000
+#define DDR_DERATEEN 0x00000000
+#define DDR_DERATEINT 0x00800000
+#define DDR_PWRCTL 0x00000000
+#define DDR_PWRTMG 0x00400010
+#define DDR_HWLPCTL 0x00000000
+#define DDR_RFSHCTL0 0x00210000
+#define DDR_RFSHCTL3 0x00000000
+#define DDR_RFSHTMG 0x0081008B
+#define DDR_CRCPARCTL0 0x00000000
+#define DDR_DRAMTMG0 0x121B2414
+#define DDR_DRAMTMG1 0x000A041C
+#define DDR_DRAMTMG2 0x0608090F
+#define DDR_DRAMTMG3 0x0050400C
+#define DDR_DRAMTMG4 0x08040608
+#define DDR_DRAMTMG5 0x06060403
+#define DDR_DRAMTMG6 0x02020002
+#define DDR_DRAMTMG7 0x00000202
+#define DDR_DRAMTMG8 0x00001005
+#define DDR_DRAMTMG14 0x000000A0
+#define DDR_ZQCTL0 0xC2000040
+#define DDR_DFITMG0 0x02060105
+#define DDR_DFITMG1 0x00000202
+#define DDR_DFILPCFG0 0x07000000
+#define DDR_DFIUPD0 0xC0400003
+#define DDR_DFIUPD1 0x00000000
+#define DDR_DFIUPD2 0x00000000
+#define DDR_DFIPHYMSTR 0x00000000
+#define DDR_ADDRMAP1 0x00080808
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x00000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x07070707
+#define DDR_ADDRMAP6 0x0F070707
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
+#define DDR_ODTCFG 0x06000600
+#define DDR_ODTMAP 0x00000001
+#define DDR_SCHED 0x00001201
+#define DDR_SCHED1 0x00000000
+#define DDR_PERFHPR1 0x01000001
+#define DDR_PERFLPR1 0x08000200
+#define DDR_PERFWR1 0x08000400
+#define DDR_DBG0 0x00000000
+#define DDR_DBG1 0x00000000
+#define DDR_DBGCMD 0x00000000
+#define DDR_POISONCFG 0x00000000
+#define DDR_PCCFG 0x00000010
+#define DDR_PCFGR_0 0x00010000
+#define DDR_PCFGW_0 0x00000000
+#define DDR_PCFGQOS0_0 0x02100B03
+#define DDR_PCFGQOS1_0 0x00800100
+#define DDR_PCFGWQOS0_0 0x01100B03
+#define DDR_PCFGWQOS1_0 0x01000200
+#define DDR_PCFGR_1 0x00010000
+#define DDR_PCFGW_1 0x00000000
+#define DDR_PCFGQOS0_1 0x02100B03
+#define DDR_PCFGQOS1_1 0x00800000
+#define DDR_PCFGWQOS0_1 0x01100B03
+#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_PGCR 0x01442E02
+#define DDR_PTR0 0x0022AA5B
+#define DDR_PTR1 0x04841104
+#define DDR_PTR2 0x042DA068
+#define DDR_ACIOCR 0x10400812
+#define DDR_DXCCR 0x00000C40
+#define DDR_DSGCR 0xF200001F
+#define DDR_DCR 0x0000000B
+#define DDR_DTPR0 0x38D488D0
+#define DDR_DTPR1 0x098B00D8
+#define DDR_DTPR2 0x10023600
+#define DDR_MR0 0x00000840
+#define DDR_MR1 0x00000000
+#define DDR_MR2 0x00000208
+#define DDR_MR3 0x00000000
+#define DDR_ODTCR 0x00010000
+#define DDR_ZQ0CR1 0x00000038
+#define DDR_DX0GCR 0x0000CE81
+#define DDR_DX0DLLCR 0x40000000
+#define DDR_DX0DQTR 0xFFFFFFFF
+#define DDR_DX0DQSTR 0x3DB02000
+#define DDR_DX1GCR 0x0000CE81
+#define DDR_DX1DLLCR 0x40000000
+#define DDR_DX1DQTR 0xFFFFFFFF
+#define DDR_DX1DQSTR 0x3DB02000
+#define DDR_DX2GCR 0x0000CE81
+#define DDR_DX2DLLCR 0x40000000
+#define DDR_DX2DQTR 0xFFFFFFFF
+#define DDR_DX2DQSTR 0x3DB02000
+#define DDR_DX3GCR 0x0000CE81
+#define DDR_DX3DLLCR 0x40000000
+#define DDR_DX3DQTR 0xFFFFFFFF
+#define DDR_DX3DQSTR 0x3DB02000
+
+#include "stm32mp15-ddr.dtsi"
diff --git a/fdts/stm32mp157-pinctrl.dtsi b/fdts/stm32mp157-pinctrl.dtsi
new file mode 100644
index 0000000..21bd34e
--- /dev/null
+++ b/fdts/stm32mp157-pinctrl.dtsi
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+/ {
+	soc {
+		pinctrl: pin-controller {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50002000 0xa400>;
+			pins-are-numbered;
+
+			gpioa: gpio@50002000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc GPIOA>;
+				st,bank-name = "GPIOA";
+				status = "disabled";
+			};
+
+			gpiob: gpio@50003000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc GPIOB>;
+				st,bank-name = "GPIOB";
+				status = "disabled";
+			};
+
+			gpioc: gpio@50004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc GPIOC>;
+				st,bank-name = "GPIOC";
+				status = "disabled";
+			};
+
+			gpiod: gpio@50005000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x400>;
+				clocks = <&rcc GPIOD>;
+				st,bank-name = "GPIOD";
+				status = "disabled";
+			};
+
+			gpioe: gpio@50006000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x400>;
+				clocks = <&rcc GPIOE>;
+				st,bank-name = "GPIOE";
+				status = "disabled";
+			};
+
+			gpiof: gpio@50007000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x400>;
+				clocks = <&rcc GPIOF>;
+				st,bank-name = "GPIOF";
+				status = "disabled";
+			};
+
+			gpiog: gpio@50008000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x400>;
+				clocks = <&rcc GPIOG>;
+				st,bank-name = "GPIOG";
+				status = "disabled";
+			};
+
+			gpioh: gpio@50009000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x400>;
+				clocks = <&rcc GPIOH>;
+				st,bank-name = "GPIOH";
+				status = "disabled";
+			};
+
+			gpioi: gpio@5000a000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x400>;
+				clocks = <&rcc GPIOI>;
+				st,bank-name = "GPIOI";
+				status = "disabled";
+			};
+
+			gpioj: gpio@5000b000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x400>;
+				clocks = <&rcc GPIOJ>;
+				st,bank-name = "GPIOJ";
+				status = "disabled";
+			};
+
+			gpiok: gpio@5000c000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xa000 0x400>;
+				clocks = <&rcc GPIOK>;
+				st,bank-name = "GPIOK";
+				status = "disabled";
+			};
+
+			uart4_pins_a: uart4@0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+					bias-disable;
+				};
+			};
+
+			usart3_pins_a: usart3@0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+						 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+						 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
+					bias-disable;
+				};
+			};
+
+			sdmmc1_b4_pins_a: sdmmc1-b4@0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+						 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
+						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+					slew-rate = <3>;
+					drive-push-pull;
+					bias-disable;
+				};
+			};
+
+			sdmmc1_dir_pins_a: sdmmc1-dir@0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+						 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+						 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+					slew-rate = <3>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+				pins2{
+					pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+					bias-pull-up;
+				};
+			};
+
+			sdmmc2_b4_pins_a: sdmmc2-b4@0 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+						 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+						 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+						 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+						 <STM32_PINMUX('E', 3, AF9)>, /* SDMMC2_CK */
+						 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+					slew-rate = <3>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+			};
+
+			sdmmc2_d47_pins_a: sdmmc2-d47@0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+						 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+						 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+						 <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+					slew-rate = <3>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+			};
+		};
+
+		pinctrl_z: pin-controller-z {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x54004000 0x400>;
+			pins-are-numbered;
+
+			gpioz: gpio@54004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x400>;
+				clocks = <&rcc GPIOZ>;
+				st,bank-name = "GPIOZ";
+				st,bank-ioport = <11>;
+				status = "disabled";
+			};
+
+			i2c4_pins_a: i2c4@0 {
+				pins {
+					pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+						 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+		};
+	};
+};
diff --git a/fdts/stm32mp157c-ed1.dts b/fdts/stm32mp157c-ed1.dts
new file mode 100644
index 0000000..e3dabe8
--- /dev/null
+++ b/fdts/stm32mp157c-ed1.dts
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c.dtsi"
+#include "stm32mp157caa-pinctrl.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157C-ED1 pmic eval daughter";
+	compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS3,115200 root=/dev/ram";
+		stdout-path = "serial3:115200n8";
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	pmic: stpmu1@33 {
+		compatible = "st,stpmu1";
+		reg = <0x33>;
+		status = "okay";
+
+		st,main_control_register = <0x04>;
+		st,vin_control_register = <0xc0>;
+		st,usb_control_register = <0x30>;
+
+		regulators {
+			compatible = "st,stpmu1-regulators";
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <8>;
+
+				regulator-state-standby {
+					regulator-suspend-microvolt = <3300000>;
+					regulator-unchanged-in-suspend;
+					regulator-mode = <8>;
+				};
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+				regulator-state-disk {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+
+				regulator-state-standby {
+					regulator-suspend-microvolt = <2900000>;
+					regulator-unchanged-in-suspend;
+				};
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+				regulator-state-disk {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&iwdg2 {
+	instance = <2>;
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+	broken-cd;
+	st,dirpol;
+	st,negedge;
+	st,pin-ckin;
+	bus-width = <4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,dirpol;
+	st,negedge;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	resets = <&rcc UART4_R>;
+	status = "okay";
+};
+
+/* ATF Specific */
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
+
+/ {
+	aliases {
+		gpio0 = &gpioa;
+		gpio1 = &gpiob;
+		gpio2 = &gpioc;
+		gpio3 = &gpiod;
+		gpio4 = &gpioe;
+		gpio5 = &gpiof;
+		gpio6 = &gpiog;
+		gpio7 = &gpioh;
+		gpio8 = &gpioi;
+		gpio9 = &gpioj;
+		gpio10 = &gpiok;
+		gpio25 = &gpioz;
+		i2c3 = &i2c4;
+	};
+
+	soc {
+		stgen: stgen@5C008000 {
+			compatible = "st,stm32-stgen";
+			reg = <0x5C008000 0x1000>;
+			status = "okay";
+		};
+	};
+};
+
+/* CLOCK init */
+&rcc {
+	st,clksrc = <
+		CLK_MPU_PLL1P
+		CLK_AXI_PLL2P
+		CLK_PLL12_HSE
+		CLK_PLL3_HSE
+		CLK_PLL4_HSE
+		CLK_RTC_LSE
+		CLK_MCO1_DISABLED
+		CLK_MCO2_DISABLED
+	>;
+
+	st,clkdiv = <
+		1 /*MPU*/
+		0 /*AXI*/
+		1 /*APB1*/
+		1 /*APB2*/
+		1 /*APB3*/
+		1 /*APB4*/
+		2 /*APB5*/
+		23 /*RTC*/
+		0 /*MCO1*/
+		0 /*MCO2*/
+	>;
+
+	st,pkcs = <
+		CLK_CKPER_HSE
+		CLK_FMC_ACLK
+		CLK_QSPI_ACLK
+		CLK_ETH_DISABLED
+		CLK_SDMMC12_PLL3R
+		CLK_DSI_DSIPLL
+		CLK_STGEN_HSE
+		CLK_USBPHY_HSE
+		CLK_SPI2S1_PLL3Q
+		CLK_SPI2S23_PLL3Q
+		CLK_SPI45_HSI
+		CLK_SPI6_HSI
+		CLK_I2C46_HSI
+		CLK_SDMMC3_PLL3R
+		CLK_USBO_USBPHY
+		CLK_ADC_CKPER
+		CLK_CEC_LSE
+		CLK_I2C12_HSI
+		CLK_I2C35_HSI
+		CLK_UART1_HSI
+		CLK_UART24_HSI
+		CLK_UART35_HSI
+		CLK_UART6_HSI
+		CLK_UART78_HSI
+		CLK_SPDIF_PLL3Q
+		CLK_FDCAN_PLL4Q
+		CLK_SAI1_PLL3Q
+		CLK_SAI2_PLL3Q
+		CLK_SAI3_PLL3Q
+		CLK_SAI4_PLL3Q
+		CLK_RNG1_CSI
+		CLK_RNG2_CSI
+		CLK_LPTIM1_PCLK1
+		CLK_LPTIM23_PCLK3
+		CLK_LPTIM45_PCLK3
+	>;
+
+	/* VCO = 1300.0 MHz => P = 650 (CPU) */
+	pll1: st,pll@0 {
+		cfg = < 2 80 0 0 0 PQR(1,0,0) >;
+		frac = < 0x800 >;
+	};
+
+	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+	pll2: st,pll@1 {
+		cfg = < 2 65 1 0 0 PQR(1,1,1) >;
+		frac = < 0x1400 >;
+	};
+
+	/* VCO = 786.4 MHz => P = 197, Q = 49, R = 98 */
+	pll3: st,pll@2 {
+		cfg = < 2 97 3 15 7 PQR(1,1,1) >;
+		frac = < 0x9ba >;
+	};
+
+	/* VCO = 508.0 MHz => P = 56, Q = 56, R = 56 */
+	pll4: st,pll@3 {
+		cfg = < 5 126 8 8 8 PQR(1,1,1) >;
+	};
+};
+
+/delete-node/ &clk_csi;
diff --git a/fdts/stm32mp157c-ev1.dts b/fdts/stm32mp157c-ev1.dts
new file mode 100644
index 0000000..98a9d35
--- /dev/null
+++ b/fdts/stm32mp157c-ev1.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+#include "stm32mp157c-ed1.dts"
+
+/ {
+	model = "STMicroelectronics STM32MP157C-EV1 pmic eval daughter on eval mother";
+	compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS3,115200 root=/dev/ram";
+		stdout-path = "serial3:115200n8";
+	};
+};
+
+&usart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usart3_pins_a>;
+	resets = <&rcc USART3_R>;
+	status = "disabled";
+};
diff --git a/fdts/stm32mp157c.dtsi b/fdts/stm32mp157c.dtsi
new file mode 100644
index 0000000..8b13c0e
--- /dev/null
+++ b/fdts/stm32mp157c.dtsi
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/clock/stm32mp1-clks.h>
+#include <dt-bindings/reset/stm32mp1-resets.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &usart1;
+		serial1 = &usart2;
+		serial2 = &usart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &usart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+	};
+
+	clocks {
+		clk_hse: clk-hse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		clk_hsi: clk-hsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <64000000>;
+		};
+
+		clk_lse: clk-lse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		clk_lsi: clk-lsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+		};
+
+		clk_csi: clk-csi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <4000000>;
+		};
+
+		clk_i2s_ckin: i2s_ckin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <64000000>;
+		};
+
+		clk_dsi_phy: ck_dsi_phy {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clk_usbo_48m: ck_usbo_48m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usart2: serial@4000e000 {
+			compatible = "st,stm32h7-usart";
+			reg = <0x4000e000 0x400>;
+			clocks = <&rcc USART2_K>;
+			status = "disabled";
+		};
+
+		usart3: serial@4000f000 {
+			compatible = "st,stm32h7-usart";
+			reg = <0x4000f000 0x400>;
+			clocks = <&rcc USART3_K>;
+			status = "disabled";
+		};
+
+		uart4: serial@40010000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40010000 0x400>;
+			clocks = <&rcc UART4_K>;
+			status = "disabled";
+		};
+
+		uart5: serial@40011000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40011000 0x400>;
+			clocks = <&rcc UART5_K>;
+			status = "disabled";
+		};
+
+
+		uart7: serial@40018000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40018000 0x400>;
+			clocks = <&rcc UART7_K>;
+			status = "disabled";
+		};
+
+		uart8: serial@40019000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40019000 0x400>;
+			clocks = <&rcc UART8_K>;
+			status = "disabled";
+		};
+
+		usart6: serial@44003000 {
+			compatible = "st,stm32h7-usart";
+			reg = <0x44003000 0x400>;
+			clocks = <&rcc USART6_K>;
+			status = "disabled";
+		};
+
+		sdmmc3: sdmmc@48004000 {
+			compatible = "st,stm32-sdmmc2";
+			reg = <0x48004000 0x400>, <0x48005000 0x400>;
+			reg-names = "sdmmc", "delay";
+			clocks = <&rcc SDMMC3_K>;
+			resets = <&rcc SDMMC3_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		rcc: rcc@50000000 {
+			compatible = "syscon", "st,stm32mp1-rcc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x50000000 0x1000>;
+		};
+
+		rcc_reboot: rcc-reboot@50000000 {
+				compatible = "syscon-reboot";
+				regmap = <&rcc>;
+				offset = <0x404>;
+				mask = <0x1>;
+		};
+
+		rng1: rng@54003000 {
+			compatible = "st,stm32-rng";
+			reg = <0x54003000 0x400>;
+			clocks = <&rcc RNG1_K>;
+			resets = <&rcc RNG1_R>;
+			status = "disabled";
+		};
+
+		fmc_nand: fmc_nand@58002000 {
+			compatible = "st,stm32mp1-fmc";
+			reg = <0x58002000 0x1000>,
+			      <0x80000000 0x40000>,
+			      <0x81000000 0x40000>,
+			      <0x88000000 0x40000>,
+			      <0x89000000 0x40000>;
+			clocks = <&rcc FMC_K>;
+			resets = <&rcc FMC_R>;
+			status = "disabled";
+		};
+
+		qspi: qspi@58003000 {
+			compatible = "st,stm32f469-qspi";
+			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+			clocks = <&rcc QSPI_K>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdmmc@58005000 {
+			compatible = "st,stm32-sdmmc2";
+			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+			reg-names = "sdmmc", "delay";
+			clocks = <&rcc SDMMC1_K>;
+			resets = <&rcc SDMMC1_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		sdmmc2: sdmmc@58007000 {
+			compatible = "st,stm32-sdmmc2";
+			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+			reg-names = "sdmmc", "delay";
+			clocks = <&rcc SDMMC2_K>;
+			resets = <&rcc SDMMC2_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		iwdg2: iwdg@5a002000 {
+			compatible = "st,stm32mp1-iwdg";
+			reg = <0x5a002000 0x400>;
+			clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+			clock-names = "pclk", "lsi";
+			status = "disabled";
+		};
+
+		usart1: serial@5c000000 {
+			compatible = "st,stm32h7-usart";
+			reg = <0x5c000000 0x400>;
+			clocks = <&rcc USART1_K>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@5c002000 {
+			compatible = "st,stm32f7-i2c";
+			reg = <0x5c002000 0x400>;
+			clocks = <&rcc I2C4_K>;
+			resets = <&rcc I2C4_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rtc: rtc@5c004000 {
+			compatible = "st,stm32mp1-rtc";
+			reg = <0x5c004000 0x400>;
+			clocks = <&rcc RTCAPB>, <&rcc RTC>;
+			clock-names = "pclk", "rtc_ck";
+		};
+	};
+};
diff --git a/fdts/stm32mp157caa-pinctrl.dtsi b/fdts/stm32mp157caa-pinctrl.dtsi
new file mode 100644
index 0000000..774561a
--- /dev/null
+++ b/fdts/stm32mp157caa-pinctrl.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+#include "stm32mp157-pinctrl.dtsi"
+/ {
+	soc {
+		pinctrl: pin-controller {
+			compatible = "st,stm32mp157caa-pinctrl";
+
+			gpioa: gpio@50002000 {
+				status = "okay";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@50003000 {
+				status = "okay";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@50004000 {
+				status = "okay";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@50005000 {
+				status = "okay";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@50006000 {
+				status = "okay";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@50007000 {
+				status = "okay";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@50008000 {
+				status = "okay";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@50009000 {
+				status = "okay";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			gpioi: gpio@5000a000 {
+				status = "okay";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			gpioj: gpio@5000b000 {
+				status = "okay";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 144 16>;
+			};
+
+			gpiok: gpio@5000c000 {
+				status = "okay";
+				ngpios = <8>;
+				gpio-ranges = <&pinctrl 0 160 8>;
+			};
+		};
+
+		pinctrl_z: pin-controller-z {
+			compatible = "st,stm32mp157caa-z-pinctrl";
+
+			gpioz: gpio@54004000 {
+				status = "okay";
+				ngpios = <8>;
+				gpio-ranges = <&pinctrl_z 0 400 8>;
+			};
+		};
+	};
+};