diff --git a/plat/st/common/bl2_io_storage.c b/plat/st/common/bl2_io_storage.c
index 6c7618a..817f449 100644
--- a/plat/st/common/bl2_io_storage.c
+++ b/plat/st/common/bl2_io_storage.c
@@ -97,6 +97,10 @@
 static const io_dev_connector_t *spi_dev_con;
 #endif
 
+static const io_uuid_spec_t fw_config_uuid_spec = {
+	.uuid = UUID_FW_CONFIG,
+};
+
 static const io_uuid_spec_t bl33_partition_spec = {
 	.uuid = UUID_NON_TRUSTED_FIRMWARE_BL33
 };
@@ -175,6 +179,11 @@
 		.image_spec = (uintptr_t)&bl33_partition_spec,
 		.check = open_fip
 	},
+	[FW_CONFIG_ID] = {
+		.dev_handle = &fip_dev_handle,
+		.image_spec = (uintptr_t)&fw_config_uuid_spec,
+		.check = open_fip
+	},
 	[TOS_FW_CONFIG_ID] = {
 		.dev_handle = &fip_dev_handle,
 		.image_spec = (uintptr_t)&tos_fw_config_uuid_spec,
diff --git a/plat/st/stm32mp1/bl2_plat_setup.c b/plat/st/stm32mp1/bl2_plat_setup.c
index 53177f6..9053a25 100644
--- a/plat/st/stm32mp1/bl2_plat_setup.c
+++ b/plat/st/stm32mp1/bl2_plat_setup.c
@@ -5,6 +5,7 @@
  */
 
 #include <assert.h>
+#include <errno.h>
 #include <string.h>
 
 #include <platform_def.h>
@@ -24,6 +25,8 @@
 #include <drivers/st/stm32mp1_clk.h>
 #include <drivers/st/stm32mp1_pwr.h>
 #include <drivers/st/stm32mp1_ram.h>
+#include <lib/fconf/fconf.h>
+#include <lib/fconf/fconf_dyn_cfg_getter.h>
 #include <lib/mmio.h>
 #include <lib/optee_utils.h>
 #include <lib/xlat_tables/xlat_tables_v2.h>
@@ -341,10 +344,76 @@
 	bl_mem_params_node_t *bl32_mem_params;
 	bl_mem_params_node_t *pager_mem_params __unused;
 	bl_mem_params_node_t *paged_mem_params __unused;
+#if !STM32MP_USE_STM32IMAGE
+	const struct dyn_cfg_dtb_info_t *config_info;
+	bl_mem_params_node_t *tos_fw_mem_params;
+	unsigned int i;
+	unsigned long long ddr_top __unused;
+	const unsigned int image_ids[] = {
+		BL32_IMAGE_ID,
+		BL33_IMAGE_ID,
+		HW_CONFIG_ID,
+		TOS_FW_CONFIG_ID,
+	};
+#endif /* !STM32MP_USE_STM32IMAGE */
 
 	assert(bl_mem_params != NULL);
 
 	switch (image_id) {
+#if !STM32MP_USE_STM32IMAGE
+	case FW_CONFIG_ID:
+		/* Set global DTB info for fixed fw_config information */
+		set_config_info(STM32MP_FW_CONFIG_BASE, STM32MP_FW_CONFIG_MAX_SIZE, FW_CONFIG_ID);
+		fconf_populate("FW_CONFIG", STM32MP_FW_CONFIG_BASE);
+
+		/* Iterate through all the fw config IDs */
+		for (i = 0U; i < ARRAY_SIZE(image_ids); i++) {
+			bl_mem_params = get_bl_mem_params_node(image_ids[i]);
+			assert(bl_mem_params != NULL);
+
+			config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, image_ids[i]);
+			if (config_info == NULL) {
+				continue;
+			}
+
+			bl_mem_params->image_info.image_base = config_info->config_addr;
+			bl_mem_params->image_info.image_max_size = config_info->config_max_size;
+
+			bl_mem_params->image_info.h.attr &= ~IMAGE_ATTRIB_SKIP_LOADING;
+
+			switch (image_ids[i]) {
+			case BL32_IMAGE_ID:
+				bl_mem_params->ep_info.pc = config_info->config_addr;
+
+				/* In case of OPTEE, initialize address space with tos_fw addr */
+				pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
+				pager_mem_params->image_info.image_base = config_info->config_addr;
+				pager_mem_params->image_info.image_max_size =
+					config_info->config_max_size;
+
+				/* Init base and size for pager if exist */
+				paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
+				paged_mem_params->image_info.image_base = STM32MP_DDR_BASE +
+					(dt_get_ddr_size() - STM32MP_DDR_S_SIZE -
+					 STM32MP_DDR_SHMEM_SIZE);
+				paged_mem_params->image_info.image_max_size = STM32MP_DDR_S_SIZE;
+				break;
+
+			case BL33_IMAGE_ID:
+				bl_mem_params->ep_info.pc = config_info->config_addr;
+				break;
+
+			case HW_CONFIG_ID:
+			case TOS_FW_CONFIG_ID:
+				break;
+
+			default:
+				return -EINVAL;
+			}
+		}
+		break;
+#endif /* !STM32MP_USE_STM32IMAGE */
+
 	case BL32_IMAGE_ID:
 		if (optee_header_is_valid(bl_mem_params->image_info.image_base)) {
 			/* BL32 is OP-TEE header */
@@ -380,6 +449,9 @@
 		} else {
 #if !STM32MP_USE_STM32IMAGE
 			bl_mem_params->ep_info.pc = bl_mem_params->image_info.image_base;
+			tos_fw_mem_params = get_bl_mem_params_node(TOS_FW_CONFIG_ID);
+			bl_mem_params->image_info.image_max_size +=
+				tos_fw_mem_params->image_info.image_max_size;
 #endif /* !STM32MP_USE_STM32IMAGE */
 			bl_mem_params->ep_info.args.arg0 = 0;
 		}
diff --git a/plat/st/stm32mp1/plat_bl2_mem_params_desc.c b/plat/st/stm32mp1/plat_bl2_mem_params_desc.c
index 0bc2b79..7963c4a 100644
--- a/plat/st/stm32mp1/plat_bl2_mem_params_desc.c
+++ b/plat/st/stm32mp1/plat_bl2_mem_params_desc.c
@@ -19,6 +19,22 @@
  * the next executable image id.
  ******************************************************************************/
 static bl_mem_params_node_t bl2_mem_params_descs[] = {
+	/* Fill FW_CONFIG related information if it exists */
+	{
+		.image_id = FW_CONFIG_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+				      VERSION_2, entry_point_info_t,
+				      SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+				      VERSION_2, image_info_t,
+				      IMAGE_ATTRIB_PLAT_SETUP),
+
+		.image_info.image_base = STM32MP_FW_CONFIG_BASE,
+		.image_info.image_max_size = STM32MP_FW_CONFIG_MAX_SIZE,
+
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
+
 	/* Fill BL32 related information */
 	{
 		.image_id = BL32_IMAGE_ID,
@@ -27,25 +43,17 @@
 				      VERSION_2, entry_point_info_t,
 				      SECURE | EXECUTABLE | EP_FIRST_EXE),
 
-		/* Updated at runtime if OP-TEE is loaded */
-		.ep_info.pc = STM32MP_BL32_BASE,
-
 		.ep_info.spsr = SPSR_MODE32(MODE32_svc, SPSR_T_ARM,
 					    SPSR_E_LITTLE,
 					    DISABLE_ALL_EXCEPTIONS),
 
 		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
 				      VERSION_2, image_info_t,
-				      IMAGE_ATTRIB_PLAT_SETUP),
-
-		/* Updated at runtime if OP-TEE is loaded */
-		.image_info.image_base = STM32MP_BL32_BASE,
-		.image_info.image_max_size = STM32MP_BL32_SIZE,
+				      IMAGE_ATTRIB_SKIP_LOADING),
 
 		.next_handoff_image_id = BL33_IMAGE_ID,
 	},
 
-#if defined(AARCH32_SP_OPTEE)
 	/* Fill BL32 external 1 image related information */
 	{
 		.image_id = BL32_EXTRA1_IMAGE_ID,
@@ -74,7 +82,7 @@
 
 		.next_handoff_image_id = INVALID_IMAGE_ID,
 	},
-#endif /* AARCH32_SP_OPTEE */
+
 	/* Fill HW_CONFIG related information if it exists */
 	{
 		.image_id = HW_CONFIG_ID,
@@ -83,15 +91,12 @@
 				      NON_SECURE | NON_EXECUTABLE),
 		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
 				      VERSION_2, image_info_t,
-				      0U),
-
-		.image_info.image_base = STM32MP_HW_CONFIG_BASE,
-		.image_info.image_max_size =
-			PLAT_STM32MP_NS_IMAGE_OFFSET - STM32MP_HW_CONFIG_BASE,
+				      IMAGE_ATTRIB_SKIP_LOADING),
 
 		.next_handoff_image_id = INVALID_IMAGE_ID,
 	},
-#if !defined(AARCH32_SP_OPTEE)
+
+	/* Fill TOS_FW_CONFIG related information if it exists */
 	{
 		.image_id = TOS_FW_CONFIG_ID,
 		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
@@ -99,13 +104,11 @@
 				      SECURE | NON_EXECUTABLE),
 		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
 				      VERSION_2, image_info_t,
-				      0U),
+				      IMAGE_ATTRIB_SKIP_LOADING),
 
-		.image_info.image_base = STM32MP_BL32_DTB_BASE,
-		.image_info.image_max_size = STM32MP_BL32_DTB_SIZE,
 		.next_handoff_image_id = INVALID_IMAGE_ID,
 	},
-#endif
+
 	/* Fill BL33 related information */
 	{
 		.image_id = BL33_IMAGE_ID,
@@ -114,17 +117,13 @@
 				      VERSION_2, entry_point_info_t,
 				      NON_SECURE | EXECUTABLE),
 
-		.ep_info.pc = PLAT_STM32MP_NS_IMAGE_OFFSET,
 		.ep_info.spsr = SPSR_MODE32(MODE32_svc, SPSR_T_ARM,
 					    SPSR_E_LITTLE,
 					    DISABLE_ALL_EXCEPTIONS),
 
 		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-				      VERSION_2, image_info_t, 0U),
-
-		.image_info.image_base = PLAT_STM32MP_NS_IMAGE_OFFSET,
-		.image_info.image_max_size = STM32MP_DDR_MAX_SIZE -
-			(PLAT_STM32MP_NS_IMAGE_OFFSET - STM32MP_DDR_BASE),
+				      VERSION_2, image_info_t,
+				      IMAGE_ATTRIB_SKIP_LOADING),
 
 		.next_handoff_image_id = INVALID_IMAGE_ID,
 	}
diff --git a/plat/st/stm32mp1/platform.mk b/plat/st/stm32mp1/platform.mk
index 9e72b50..d415a1e 100644
--- a/plat/st/stm32mp1/platform.mk
+++ b/plat/st/stm32mp1/platform.mk
@@ -70,6 +70,7 @@
 FDT_SOURCES		+=	$(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl32.dts,$(DTB_FILE_NAME)))
 endif
 endif
+DTC_CPPFLAGS		+=	${INCLUDES}
 DTC_FLAGS		+=	-Wno-unit_address_vs_reg
 
 # Macros and rules to build TF binary
@@ -92,6 +93,13 @@
 ifneq (${STM32MP_USE_STM32IMAGE},1)
 FIP_DEPS		+=	dtbs
 STM32MP_HW_CONFIG	:=	${BL33_CFG}
+STM32MP_FW_CONFIG_NAME	:=	$(patsubst %.dtb,%-fw-config.dtb,$(DTB_FILE_NAME))
+STM32MP_FW_CONFIG	:=	${BUILD_PLAT}/fdts/$(STM32MP_FW_CONFIG_NAME)
+ifneq (${AARCH32_SP},none)
+FDT_SOURCES		+=	$(addprefix fdts/, $(patsubst %.dtb,%.dts,$(STM32MP_FW_CONFIG_NAME)))
+endif
+# Add the FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_FW_CONFIG},--fw-config))
 # Add the HW_CONFIG to FIP and specify the same to certtool
 $(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_HW_CONFIG},--hw-config))
 ifeq ($(AARCH32_SP),sp_min)
@@ -185,6 +193,8 @@
 
 ifneq (${STM32MP_USE_STM32IMAGE},1)
 BL2_SOURCES		+=	drivers/io/io_fip.c					\
+				lib/fconf/fconf.c					\
+				lib/fconf/fconf_dyn_cfg_getter.c			\
 				plat/st/common/bl2_io_storage.c				\
 				plat/st/stm32mp1/plat_bl2_mem_params_desc.c
 else
diff --git a/plat/st/stm32mp1/sp_min/sp_min_setup.c b/plat/st/stm32mp1/sp_min/sp_min_setup.c
index e30febb..1495e02 100644
--- a/plat/st/stm32mp1/sp_min/sp_min_setup.c
+++ b/plat/st/stm32mp1/sp_min/sp_min_setup.c
@@ -45,6 +45,7 @@
 {
 	switch (id & INT_ID_MASK) {
 	case STM32MP1_IRQ_TZC400:
+		tzc400_init(STM32MP1_TZC_BASE);
 		(void)tzc400_it_handler();
 		panic();
 		break;
@@ -117,6 +118,11 @@
 	struct dt_node_info dt_uart_info;
 	int result;
 	bl_params_t *params_from_bl2 = (bl_params_t *)arg0;
+#if STM32MP_USE_STM32IMAGE
+	uintptr_t dt_addr = STM32MP_DTB_BASE;
+#else
+	uintptr_t dt_addr = arg1;
+#endif
 
 	/* Imprecise aborts can be masked in NonSecure */
 	write_scr(read_scr() | SCR_AW_BIT);
@@ -156,7 +162,7 @@
 		bl_params = bl_params->next_params_info;
 	}
 
-	if (dt_open_and_check(STM32MP_DTB_BASE) < 0) {
+	if (dt_open_and_check(dt_addr) < 0) {
 		panic();
 	}
 
@@ -195,9 +201,6 @@
  ******************************************************************************/
 void sp_min_platform_setup(void)
 {
-	/* Initialize tzc400 after DDR initialization */
-	stm32mp1_security_setup();
-
 	generic_delay_timer_init();
 
 	stm32mp1_gic_init();
diff --git a/plat/st/stm32mp1/stm32mp1_def.h b/plat/st/stm32mp1/stm32mp1_def.h
index aa76703..f14bf8c 100644
--- a/plat/st/stm32mp1/stm32mp1_def.h
+++ b/plat/st/stm32mp1/stm32mp1_def.h
@@ -87,13 +87,6 @@
 /* DDR configuration */
 #define STM32MP_DDR_BASE		U(0xC0000000)
 #define STM32MP_DDR_MAX_SIZE		U(0x40000000)	/* Max 1GB */
-#ifdef AARCH32_SP_OPTEE
-#define STM32MP_DDR_S_SIZE		U(0x01E00000)	/* 30 MB */
-#define STM32MP_DDR_SHMEM_SIZE		U(0x00200000)	/* 2 MB */
-#else
-#define STM32MP_DDR_S_SIZE		U(0)
-#define STM32MP_DDR_SHMEM_SIZE		U(0)
-#endif
 
 /* DDR power initializations */
 #ifndef __ASSEMBLER__
diff --git a/plat/st/stm32mp1/stm32mp1_fip_def.h b/plat/st/stm32mp1/stm32mp1_fip_def.h
index 5b9a3cb..d8561dc 100644
--- a/plat/st/stm32mp1/stm32mp1_fip_def.h
+++ b/plat/st/stm32mp1/stm32mp1_fip_def.h
@@ -7,10 +7,14 @@
 #ifndef STM32MP1_FIP_DEF_H
 #define STM32MP1_FIP_DEF_H
 
+#define STM32MP_DDR_S_SIZE		U(0x01E00000)	/* 30 MB */
+#define STM32MP_DDR_SHMEM_SIZE		U(0x00200000)	/* 2 MB */
+
 #define STM32MP_BL2_SIZE		U(0x0001B000)	/* 108 KB for BL2 */
 #define STM32MP_BL2_DTB_SIZE		U(0x00006000)	/* 24 KB for DTB */
 #define STM32MP_BL32_SIZE		U(0x00019000)	/* 100 KB for BL32 */
 #define STM32MP_BL32_DTB_SIZE		U(0x00005000)	/* 20 KB for DTB */
+#define STM32MP_FW_CONFIG_MAX_SIZE	PAGE_SIZE	/* 4 KB for FCONF DTB */
 #define STM32MP_HW_CONFIG_MAX_SIZE	U(0x40000)	/* 256 KB for HW config DTB */
 
 #define STM32MP_BL2_BASE		(STM32MP_SEC_SYSRAM_BASE + \
@@ -25,6 +29,7 @@
 #define STM32MP_BL32_BASE		(STM32MP_BL32_DTB_BASE + \
 					 STM32MP_BL32_DTB_SIZE)
 
+
 #if defined(IMAGE_BL2)
 #define STM32MP_DTB_SIZE		STM32MP_BL2_DTB_SIZE
 #define STM32MP_DTB_BASE		STM32MP_BL2_DTB_BASE
@@ -41,6 +46,9 @@
 					 STM32MP_OPTEE_BASE)
 #endif
 
+#define STM32MP_FW_CONFIG_BASE		(STM32MP_SYSRAM_BASE + \
+					 STM32MP_SYSRAM_SIZE - \
+					 PAGE_SIZE)
 #define STM32MP_HW_CONFIG_BASE		(STM32MP_BL33_BASE + \
 					STM32MP_BL33_MAX_SIZE)
 
diff --git a/plat/st/stm32mp1/stm32mp1_stm32image_def.h b/plat/st/stm32mp1/stm32mp1_stm32image_def.h
index 8bae56a..8efa342 100644
--- a/plat/st/stm32mp1/stm32mp1_stm32image_def.h
+++ b/plat/st/stm32mp1/stm32mp1_stm32image_def.h
@@ -7,6 +7,14 @@
 #ifndef STM32MP1_STM32IMAGE_DEF_H
 #define STM32MP1_STM32IMAGE_DEF_H
 
+#ifdef AARCH32_SP_OPTEE
+#define STM32MP_DDR_S_SIZE		U(0x01E00000)	/* 30 MB */
+#define STM32MP_DDR_SHMEM_SIZE		U(0x00200000)	/* 2 MB */
+#else
+#define STM32MP_DDR_S_SIZE		U(0)
+#define STM32MP_DDR_SHMEM_SIZE		U(0)
+#endif
+
 #define STM32MP_BL2_SIZE		U(0x0001C000)	/* 112 KB for BL2 */
 #define STM32MP_DTB_SIZE		U(0x00006000)	/* 24 KB for DTB */