plat: marvell: Add board support for A8K platform
Add support for A8K platform boards
Change-Id: Ife025d930d2ab6cabbc13bbe19b2273cc1c938c8
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
diff --git a/plat/marvell/a8k/a70x0_amc/board/dram_port.c b/plat/marvell/a8k/a70x0_amc/board/dram_port.c
new file mode 100644
index 0000000..ab1df46
--- /dev/null
+++ b/plat/marvell/a8k/a70x0_amc/board/dram_port.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <arch_helpers.h>
+#include <debug.h>
+#include <mv_ddr_if.h>
+#include <plat_marvell.h>
+
+/*
+ * This function may modify the default DRAM parameters
+ * based on information received from SPD or bootloader
+ * configuration located on non volatile storage
+ */
+void plat_marvell_dram_update_topology(void)
+{
+}
+
+/*
+ * This struct provides the DRAM training code with
+ * the appropriate board DRAM configuration
+ */
+static struct mv_ddr_topology_map board_topology_map = {
+/* FIXME: MISL board 2CS 8Gb x8 devices of micron - 2133P */
+ DEBUG_LEVEL_ERROR,
+ 0x1, /* active interfaces */
+ /* cs_mask, mirror, dqs_swap, ck_swap X subphys */
+ { { { {0x3, 0x2, 0, 0},
+ {0x3, 0x2, 0, 0},
+ {0x3, 0x2, 0, 0},
+ {0x3, 0x2, 0, 0},
+ {0x3, 0x2, 0, 0},
+ {0x3, 0x2, 0, 0},
+ {0x3, 0x2, 0, 0},
+ {0x3, 0x2, 0, 0},
+ {0x3, 0x2, 0, 0} },
+ SPEED_BIN_DDR_2400T, /* speed_bin */
+ MV_DDR_DEV_WIDTH_8BIT, /* sdram device width */
+ MV_DDR_DIE_CAP_8GBIT, /* die capacity */
+ MV_DDR_FREQ_SAR, /* frequency */
+ 0, 0, /* cas_l, cas_wl */
+ MV_DDR_TEMP_LOW} }, /* temperature */
+ MV_DDR_32BIT_ECC_PUP8_BUS_MASK, /* subphys mask */
+ MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
+ { {0} }, /* raw spd data */
+ {0}, /* timing parameters */
+ { /* electrical configuration */
+ { /* memory electrical configuration */
+ MV_DDR_RTT_NOM_PARK_RZQ_DISABLE, /* rtt_nom */
+ {
+ MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* rtt_park 1cs */
+ MV_DDR_RTT_NOM_PARK_RZQ_DIV1 /* rtt_park 2cs */
+ },
+ {
+ MV_DDR_RTT_WR_DYN_ODT_OFF, /* rtt_wr 1cs */
+ MV_DDR_RTT_WR_RZQ_DIV2 /* rtt_wr 2cs */
+ },
+ MV_DDR_DIC_RZQ_DIV7 /* dic */
+ },
+ { /* phy electrical configuration */
+ MV_DDR_OHM_30, /* data_drv_p */
+ MV_DDR_OHM_30, /* data_drv_n */
+ MV_DDR_OHM_30, /* ctrl_drv_p */
+ MV_DDR_OHM_30, /* ctrl_drv_n */
+ {
+ MV_DDR_OHM_60, /* odt_p 1cs */
+ MV_DDR_OHM_120 /* odt_p 2cs */
+ },
+ {
+ MV_DDR_OHM_60, /* odt_n 1cs */
+ MV_DDR_OHM_120 /* odt_n 2cs */
+ },
+ },
+ { /* mac electrical configuration */
+ MV_DDR_ODT_CFG_NORMAL, /* odtcfg_pattern */
+ MV_DDR_ODT_CFG_ALWAYS_ON, /* odtcfg_write */
+ MV_DDR_ODT_CFG_NORMAL, /* odtcfg_read */
+ },
+ }
+};
+
+struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
+{
+ /* Return the board topology as defined in the board code */
+ return &board_topology_map;
+}
diff --git a/plat/marvell/a8k/a70x0_amc/board/marvell_plat_config.c b/plat/marvell/a8k/a70x0_amc/board/marvell_plat_config.c
new file mode 100644
index 0000000..ec4124c
--- /dev/null
+++ b/plat/marvell/a8k/a70x0_amc/board/marvell_plat_config.c
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <a8k_common.h>
+
+/*
+ * If bootrom is currently at BLE there's no need to include the memory
+ * maps structure at this point
+ */
+#include <mvebu_def.h>
+#ifndef IMAGE_BLE
+
+/*****************************************************************************
+ * AMB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win *amb_memory_map;
+
+int marvell_get_amb_memory_map(struct addr_map_win **win, uint32_t *size,
+ uintptr_t base)
+{
+ *win = amb_memory_map;
+ if (*win == NULL)
+ *size = 0;
+ else
+ *size = ARRAY_SIZE(amb_memory_map);
+
+ return 0;
+}
+#endif
+
+/*****************************************************************************
+ * IO WIN Configuration
+ *****************************************************************************
+ */
+struct addr_map_win io_win_memory_map[] = {
+#ifndef IMAGE_BLE
+ /* MCI 0 indirect window */
+ {MVEBU_MCI_REG_BASE_REMAP(0), 0x100000, MCI_0_TID},
+ /* MCI 1 indirect window */
+ {MVEBU_MCI_REG_BASE_REMAP(1), 0x100000, MCI_1_TID},
+#endif
+};
+
+uint32_t marvell_get_io_win_gcr_target(int ap_index)
+{
+ return PIDI_TID;
+}
+
+int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win,
+ uint32_t *size)
+{
+ *win = io_win_memory_map;
+ if (*win == NULL)
+ *size = 0;
+ else
+ *size = ARRAY_SIZE(io_win_memory_map);
+
+ return 0;
+}
+
+#ifndef IMAGE_BLE
+/*****************************************************************************
+ * IOB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win iob_memory_map[] = {
+ /* PEX0_X4 window */
+ {0x00000000f6000000, 0x6000000, PEX0_TID},
+ {0x00000000c0000000, 0x30000000, PEX0_TID},
+ {0x0000000800000000, 0x200000000, PEX0_TID},
+};
+
+int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size,
+ uintptr_t base)
+{
+ *win = iob_memory_map;
+ *size = ARRAY_SIZE(iob_memory_map);
+
+ return 0;
+}
+#endif
+
+/*****************************************************************************
+ * CCU Configuration
+ *****************************************************************************
+ */
+struct addr_map_win ccu_memory_map[] = {
+#ifdef IMAGE_BLE
+ {0x00000000f2000000, 0x4000000, IO_0_TID}, /* IO window */
+#else
+ {0x00000000f2000000, 0xe000000, IO_0_TID},
+ {0x00000000c0000000, 0x30000000, IO_0_TID}, /* IO window */
+ {0x0000000800000000, 0x200000000, IO_0_TID}, /* IO window */
+#endif
+};
+
+uint32_t marvell_get_ccu_gcr_target(int ap)
+{
+ return DRAM_0_TID;
+}
+
+int marvell_get_ccu_memory_map(int ap_index, struct addr_map_win **win,
+ uint32_t *size)
+{
+ *win = ccu_memory_map;
+ *size = ARRAY_SIZE(ccu_memory_map);
+
+ return 0;
+}
+
+#ifdef IMAGE_BLE
+
+struct pci_hw_cfg *plat_get_pcie_hw_data(void)
+{
+ return NULL;
+}
+
+/*****************************************************************************
+ * SKIP IMAGE Configuration
+ *****************************************************************************
+ */
+#if PLAT_RECOVERY_IMAGE_ENABLE
+struct skip_image skip_im = {
+ .detection_method = GPIO,
+ .info.gpio.num = 33,
+ .info.gpio.button_state = HIGH,
+ .info.test.cp_ap = CP,
+ .info.test.cp_index = 0,
+};
+
+void *plat_marvell_get_skip_image_data(void)
+{
+ /* Return the skip_image configurations */
+ return &skip_im;
+}
+#endif
+#endif
diff --git a/plat/marvell/a8k/a70x0_amc/mvebu_def.h b/plat/marvell/a8k/a70x0_amc/mvebu_def.h
new file mode 100644
index 0000000..5c66552
--- /dev/null
+++ b/plat/marvell/a8k/a70x0_amc/mvebu_def.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MVEBU_DEF_H__
+#define __MVEBU_DEF_H__
+
+#include <a8k_plat_def.h>
+
+#define CP_COUNT 1 /* A70x0 has single CP0 */
+
+/***********************************************************************
+ * Required platform porting definitions common to all
+ * Management Compute SubSystems (MSS)
+ ***********************************************************************
+ */
+/*
+ * Load address of SCP_BL2
+ * SCP_BL2 is loaded to the same place as BL31.
+ * Once SCP_BL2 is transferred to the SCP,
+ * it is discarded and BL31 is loaded over the top.
+ */
+#ifdef SCP_IMAGE
+#define SCP_BL2_BASE BL31_BASE
+#endif
+
+
+#endif /* __MVEBU_DEF_H__ */
diff --git a/plat/marvell/a8k/a70x0_amc/platform.mk b/plat/marvell/a8k/a70x0_amc/platform.mk
new file mode 100644
index 0000000..29dfd95
--- /dev/null
+++ b/plat/marvell/a8k/a70x0_amc/platform.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2018 Marvell International Ltd.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+# https://spdx.org/licenses
+#
+
+PCI_EP_SUPPORT := 0
+
+DOIMAGE_SEC := tools/doimage/secure/sec_img_7K.cfg
+
+MARVELL_MOCHI_DRV := drivers/marvell/mochi/apn806_setup.c
+
+include plat/marvell/a8k/common/a8k_common.mk
+
+include plat/marvell/common/marvell_common.mk