diff --git a/plat/arm/board/rddaniel/fdts/rddaniel_fw_config.dts b/plat/arm/board/rddaniel/fdts/rddaniel_fw_config.dts
index b9265ad..9c9cefe 100644
--- a/plat/arm/board/rddaniel/fdts/rddaniel_fw_config.dts
+++ b/plat/arm/board/rddaniel/fdts/rddaniel_fw_config.dts
@@ -12,9 +12,8 @@
 	dtb-registry {
 		compatible = "fconf,dyn_cfg-dtb_registry";
 
-		/* tb_fw_config is temporarily contained on this dtb */
 		tb_fw-config {
-			load-address = <0x0 0x4001010>;
+			load-address = <0x0 0x4001300>;
 			max-size = <0x200>;
 			id = <TB_FW_CONFIG_ID>;
 		};
@@ -25,23 +24,4 @@
 			id = <NT_FW_CONFIG_ID>;
 		};
 	};
-
-	tb_fw-config {
-		compatible = "arm,tb_fw";
-
-		/* Disable authentication for development */
-		disable_auth = <0x0>;
-
-		/*
-		 * The following two entries are placeholders for Mbed TLS
-		 * heap information. The default values don't matter since
-		 * they will be overwritten by BL1.
-		 * In case of having shared Mbed TLS heap between BL1 and BL2,
-		 * BL1 will populate these two properties with the respective
-		 * info about the shared heap. This info will be available for
-		 * BL2 in order to locate and re-use the heap.
-		 */
-		mbedtls_heap_addr = <0x0 0x0>;
-		mbedtls_heap_size = <0x0>;
-	};
 };
diff --git a/plat/arm/board/rddaniel/fdts/rddaniel_tb_fw_config.dts b/plat/arm/board/rddaniel/fdts/rddaniel_tb_fw_config.dts
new file mode 100644
index 0000000..49eda27
--- /dev/null
+++ b/plat/arm/board/rddaniel/fdts/rddaniel_tb_fw_config.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+	tb_fw-config {
+		compatible = "arm,tb_fw";
+
+		/* Disable authentication for development */
+		disable_auth = <0x0>;
+
+		/*
+		 * The following two entries are placeholders for Mbed TLS
+		 * heap information. The default values don't matter since
+		 * they will be overwritten by BL1.
+		 * In case of having shared Mbed TLS heap between BL1 and BL2,
+		 * BL1 will populate these two properties with the respective
+		 * info about the shared heap. This info will be available for
+		 * BL2 in order to locate and re-use the heap.
+		 */
+		mbedtls_heap_addr = <0x0 0x0>;
+		mbedtls_heap_size = <0x0>;
+	};
+};
diff --git a/plat/arm/board/rddaniel/platform.mk b/plat/arm/board/rddaniel/platform.mk
index 94a3928..bdf20ca 100644
--- a/plat/arm/board/rddaniel/platform.mk
+++ b/plat/arm/board/rddaniel/platform.mk
@@ -33,9 +33,13 @@
 				plat/arm/common/arm_nor_psci_mem_protect.c
 
 # Add the FDT_SOURCES and options for Dynamic Config
-FDT_SOURCES		+=	${RDDANIEL_BASE}/fdts/${PLAT}_fw_config.dts
-TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+FDT_SOURCES		+=	${RDDANIEL_BASE}/fdts/${PLAT}_fw_config.dts	\
+				${RDDANIEL_BASE}/fdts/${PLAT}_tb_fw_config.dts
+FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
 
+# Add the FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config))
 # Add the TB_FW_CONFIG to FIP and specify the same to certtool
 $(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config))