diff --git a/Makefile b/Makefile
index 83b8808..87e35e9 100644
--- a/Makefile
+++ b/Makefile
@@ -125,7 +125,7 @@
 OD			:=	${CROSS_COMPILE}objdump
 NM			:=	${CROSS_COMPILE}nm
 PP			:=	${CROSS_COMPILE}gcc -E
-DTC			?=	dtc
+DTC			:=	dtc
 
 # Use ${LD}.bfd instead if it exists (as absolute path or together with $PATH).
 ifneq ($(strip $(wildcard ${LD}.bfd) \
@@ -192,8 +192,8 @@
 				common/${ARCH}/debug.S			\
 				lib/${ARCH}/cache_helpers.S		\
 				lib/${ARCH}/misc_helpers.S		\
+				plat/common/plat_bl_common.c		\
 				plat/common/plat_log_common.c		\
-				plat/common/platform_helpers_default.c	\
 				plat/common/${ARCH}/plat_common.c	\
 				plat/common/${ARCH}/platform_helpers.S	\
 				${COMPILER_RT_SRCS}			\
@@ -638,9 +638,7 @@
 
 # Expand build macros for the different images
 ifeq (${NEED_FDT},yes)
-$(eval $(call MAKE_DTBS,$(BUILD_PLAT)/fdts,$(FDT_SOURCES)))
-$(eval $(call MAKE_FDT))
-dtbs: $(DTBS)
+    $(eval $(call MAKE_DTBS,$(BUILD_PLAT)/fdts,$(FDT_SOURCES)))
 endif
 
 locate-checkpatch:
@@ -777,7 +775,7 @@
 	@echo "  distclean      Remove all build artifacts for all platforms"
 	@echo "  certtool       Build the Certificate generation tool"
 	@echo "  fiptool        Build the Firmware Image Package (FIP) creation tool"
-	@echo "  dtbs           Build the Flattened device tree (if required for the platform)"
+	@echo "  dtbs           Build the Device Tree Blobs (if required for the platform)"
 	@echo ""
 	@echo "Note: most build targets require PLAT to be set to a specific platform."
 	@echo ""
diff --git a/bl1/bl1_fwu.c b/bl1/bl1_fwu.c
index 07a7fc8..3878083 100644
--- a/bl1/bl1_fwu.c
+++ b/bl1/bl1_fwu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -350,6 +350,15 @@
 		return -ENOMEM;
 	}
 
+	/* Allow the platform to handle pre-image load before copying */
+	if (image_desc->state == IMAGE_STATE_RESET) {
+		if (bl1_plat_handle_pre_image_load(image_id) != 0) {
+			ERROR("BL1-FWU: Failure in pre-image load of image id %d\n",
+					image_id);
+			return -EPERM;
+		}
+	}
+
 	/* Everything looks sane. Go ahead and copy the block of data. */
 	dest_addr = image_desc->image_info.image_base + image_desc->copied_size;
 	memcpy((void *) dest_addr, (const void *) image_src, block_size);
@@ -474,6 +483,18 @@
 	/* Indicate that image is in authenticated state. */
 	image_desc->state = IMAGE_STATE_AUTHENTICATED;
 
+	/* Allow the platform to handle post-image load */
+	result = bl1_plat_handle_post_image_load(image_id);
+	if (result != 0) {
+		ERROR("BL1-FWU: Failure %d in post-image load of image id %d\n",
+				result, image_id);
+		/*
+		 * Panic here as the platform handling of post-image load is
+		 * not correct.
+		 */
+		plat_error_handler(result);
+	}
+
 	/*
 	 * Flush image_info to memory so that other
 	 * secure world images can see changes.
diff --git a/bl1/bl1_main.c b/bl1/bl1_main.c
index 91b5f0b..b2e7c28 100644
--- a/bl1/bl1_main.c
+++ b/bl1/bl1_main.c
@@ -25,24 +25,15 @@
 	0xfd3967d4, 0x72cb, 0x4d9a, 0xb5, 0x75,
 	0x67, 0x15, 0xd6, 0xf4, 0xbb, 0x4a);
 
-
 static void bl1_load_bl2(void);
 
 /*******************************************************************************
- * The next function has a weak definition. Platform specific code can override
- * it if it wishes to.
- ******************************************************************************/
-#pragma weak bl1_init_bl2_mem_layout
-
-/*******************************************************************************
- * Function that takes a memory layout into which BL2 has been loaded and
- * populates a new memory layout for BL2 that ensures that BL1's data sections
- * resident in secure RAM are not visible to BL2.
+ * Helper utility to calculate the BL2 memory layout taking into consideration
+ * the BL1 RW data assuming that it is at the top of the memory layout.
  ******************************************************************************/
-void bl1_init_bl2_mem_layout(const meminfo_t *bl1_mem_layout,
-			     meminfo_t *bl2_mem_layout)
+void bl1_calc_bl2_mem_layout(const meminfo_t *bl1_mem_layout,
+			meminfo_t *bl2_mem_layout)
 {
-
 	assert(bl1_mem_layout != NULL);
 	assert(bl2_mem_layout != NULL);
 
@@ -71,6 +62,25 @@
 	flush_dcache_range((unsigned long)bl2_mem_layout, sizeof(meminfo_t));
 }
 
+#if !ERROR_DEPRECATED
+/*******************************************************************************
+ * Compatibility default implementation for deprecated API. This has a weak
+ * definition. Platform specific code can override it if it wishes to.
+ ******************************************************************************/
+#pragma weak bl1_init_bl2_mem_layout
+
+/*******************************************************************************
+ * Function that takes a memory layout into which BL2 has been loaded and
+ * populates a new memory layout for BL2 that ensures that BL1's data sections
+ * resident in secure RAM are not visible to BL2.
+ ******************************************************************************/
+void bl1_init_bl2_mem_layout(const meminfo_t *bl1_mem_layout,
+			     meminfo_t *bl2_mem_layout)
+{
+	bl1_calc_bl2_mem_layout(bl1_mem_layout, bl2_mem_layout);
+}
+#endif
+
 /*******************************************************************************
  * Function to perform late architectural and platform specific initialization.
  * It also queries the platform to load and run next BL image. Only called
@@ -157,9 +167,6 @@
 {
 	image_desc_t *image_desc;
 	image_info_t *image_info;
-	entry_point_info_t *ep_info;
-	meminfo_t *bl1_tzram_layout;
-	meminfo_t *bl2_tzram_layout;
 	int err;
 
 	/* Get the image descriptor */
@@ -168,24 +175,26 @@
 
 	/* Get the image info */
 	image_info = &image_desc->image_info;
-
-	/* Get the entry point info */
-	ep_info = &image_desc->ep_info;
-
-	/* Find out how much free trusted ram remains after BL1 load */
-	bl1_tzram_layout = bl1_plat_sec_mem_layout();
-
 	INFO("BL1: Loading BL2\n");
 
-#if LOAD_IMAGE_V2
-	err = bl1_plat_handle_pre_image_load();
+	err = bl1_plat_handle_pre_image_load(BL2_IMAGE_ID);
 	if (err) {
 		ERROR("Failure in pre image load handling of BL2 (%d)\n", err);
 		plat_error_handler(err);
 	}
 
+#if LOAD_IMAGE_V2
 	err = load_auth_image(BL2_IMAGE_ID, image_info);
 #else
+	entry_point_info_t *ep_info;
+	meminfo_t *bl1_tzram_layout;
+
+	/* Get the entry point info */
+	ep_info = &image_desc->ep_info;
+
+	/* Find out how much free trusted ram remains after BL1 load */
+	bl1_tzram_layout = bl1_plat_sec_mem_layout();
+
 	/* Load the BL2 image */
 	err = load_auth_image(bl1_tzram_layout,
 			 BL2_IMAGE_ID,
@@ -200,32 +209,14 @@
 		plat_error_handler(err);
 	}
 
-#if LOAD_IMAGE_V2
 	/* Allow platform to handle image information. */
-	err = bl1_plat_handle_post_image_load();
+	err = bl1_plat_handle_post_image_load(BL2_IMAGE_ID);
 	if (err) {
 		ERROR("Failure in post image load handling of BL2 (%d)\n", err);
 		plat_error_handler(err);
 	}
 
-	/*
-	 * Create a new layout of memory for BL2 as seen by BL1 i.e.
-	 * tell it the amount of total and free memory available.
-	 * This layout is created at the first free address visible
-	 * to BL2. BL2 will read the memory layout before using its
-	 * memory for other purposes.
-	 */
-	bl2_tzram_layout = (meminfo_t *) bl1_tzram_layout->total_base;
-#else
-	bl2_tzram_layout = (meminfo_t *) bl1_tzram_layout->free_base;
-#endif /* LOAD_IMAGE_V2 */
-
-	bl1_init_bl2_mem_layout(bl1_tzram_layout, bl2_tzram_layout);
-
-	ep_info->args.arg1 = (uintptr_t)bl2_tzram_layout;
 	NOTICE("BL1: Booting BL2\n");
-	VERBOSE("BL1: BL2 memory layout address = %p\n",
-		(void *) bl2_tzram_layout);
 }
 
 /*******************************************************************************
diff --git a/bl2/aarch32/bl2_entrypoint.S b/bl2/aarch32/bl2_entrypoint.S
index e6fa5b9..d215f48 100644
--- a/bl2/aarch32/bl2_entrypoint.S
+++ b/bl2/aarch32/bl2_entrypoint.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -26,12 +26,14 @@
 
 func bl2_entrypoint
 	/*---------------------------------------------
-	 * Save from r1 the extents of the trusted ram
-	 * available to BL2 for future use.
-	 * r0 is not currently used.
+	 * Save arguments x0 - x3 from BL1 for future
+	 * use.
 	 * ---------------------------------------------
 	 */
- 	mov	r11, r1
+	mov	r9, r0
+	mov	r10, r1
+	mov	r11, r2
+	mov	r12, r3
 
 	/* ---------------------------------------------
 	 * Set the exception vector to something sane.
@@ -111,8 +113,11 @@
 	 * specific early arch. setup e.g. mmu setup
 	 * ---------------------------------------------
 	 */
-	mov	r0, r11
-	bl	bl2_early_platform_setup
+	mov	r0, r9
+	mov	r1, r10
+	mov	r2, r11
+	mov	r3, r12
+	bl	bl2_early_platform_setup2
 	bl	bl2_plat_arch_setup
 
 	/* ---------------------------------------------
diff --git a/bl2/aarch64/bl2_entrypoint.S b/bl2/aarch64/bl2_entrypoint.S
index 3ab8b5a..bc8cbfd 100644
--- a/bl2/aarch64/bl2_entrypoint.S
+++ b/bl2/aarch64/bl2_entrypoint.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -15,12 +15,14 @@
 
 func bl2_entrypoint
 	/*---------------------------------------------
-	 * Save from x1 the extents of the tzram
-	 * available to BL2 for future use.
-	 * x0 is not currently used.
+	 * Save arguments x0 - x3 from BL1 for future
+	 * use.
 	 * ---------------------------------------------
 	 */
-	mov	x20, x1
+	mov	x20, x0
+	mov	x21, x1
+	mov	x22, x2
+	mov	x23, x3
 
 	/* ---------------------------------------------
 	 * Set the exception vector to something sane.
@@ -103,7 +105,11 @@
 	 * ---------------------------------------------
 	 */
 	mov	x0, x20
-	bl	bl2_early_platform_setup
+	mov	x1, x21
+	mov	x2, x22
+	mov	x3, x23
+	bl	bl2_early_platform_setup2
+
 	bl	bl2_plat_arch_setup
 
 	/* ---------------------------------------------
diff --git a/bl2/bl2.mk b/bl2/bl2.mk
index 9d75286..a856fb7 100644
--- a/bl2/bl2.mk
+++ b/bl2/bl2.mk
@@ -29,7 +29,6 @@
 else
 BL2_SOURCES		+=	bl2/${ARCH}/bl2_el3_entrypoint.S	\
 				bl2/${ARCH}/bl2_el3_exceptions.S	\
-				plat/common/plat_bl2_el3_common.c	\
 				lib/cpus/${ARCH}/cpu_helpers.S		\
 				lib/cpus/errata_report.c
 BL2_LINKERFILE		:=	bl2/bl2_el3.ld.S
diff --git a/bl31/aarch64/bl31_entrypoint.S b/bl31/aarch64/bl31_entrypoint.S
index 419927d..924f295 100644
--- a/bl31/aarch64/bl31_entrypoint.S
+++ b/bl31/aarch64/bl31_entrypoint.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -23,13 +23,13 @@
 func bl31_entrypoint
 #if !RESET_TO_BL31
 	/* ---------------------------------------------------------------
-	 * Preceding bootloader has populated x0 with a pointer to a
-	 * 'bl31_params' structure & x1 with a pointer to platform
-	 * specific structure
+	 * Stash the previous bootloader arguments x0 - x3 for later use.
 	 * ---------------------------------------------------------------
 	 */
 	mov	x20, x0
 	mov	x21, x1
+	mov	x22, x2
+	mov	x23, x3
 
 	/* ---------------------------------------------------------------------
 	 * For !RESET_TO_BL31 systems, only the primary CPU ever reaches
@@ -47,13 +47,6 @@
 		_init_memory=0					\
 		_init_c_runtime=1				\
 		_exception_vectors=runtime_exceptions
-
-	/* ---------------------------------------------------------------------
-	 * Relay the previous bootloader's arguments to the platform layer
-	 * ---------------------------------------------------------------------
-	 */
-	mov	x0, x20
-	mov	x1, x21
 #else
 	/* ---------------------------------------------------------------------
 	 * For RESET_TO_BL31 systems which have a programmable reset address,
@@ -75,15 +68,20 @@
 	 * arguments passed to the platform layer to reflect that.
 	 * ---------------------------------------------------------------------
 	 */
-	mov	x0, 0
-	mov	x1, 0
+	mov	x20, 0
+	mov	x21, 0
+	mov	x22, 0
+	mov	x23, 0
 #endif /* RESET_TO_BL31 */
-
 	/* ---------------------------------------------
 	 * Perform platform specific early arch. setup
 	 * ---------------------------------------------
 	 */
-	bl	bl31_early_platform_setup
+	mov	x0, x20
+	mov	x1, x21
+	mov	x2, x22
+	mov	x3, x23
+	bl	bl31_early_platform_setup2
 	bl	bl31_plat_arch_setup
 
 	/* ---------------------------------------------
diff --git a/bl32/sp_min/aarch32/entrypoint.S b/bl32/sp_min/aarch32/entrypoint.S
index e7528d3..3dd2369 100644
--- a/bl32/sp_min/aarch32/entrypoint.S
+++ b/bl32/sp_min/aarch32/entrypoint.S
@@ -64,8 +64,10 @@
 	 * specific structure
 	 * ---------------------------------------------------------------
 	 */
-	mov	r11, r0
-	mov	r12, r1
+	mov	r9, r0
+	mov	r10, r1
+	mov	r11, r2
+	mov	r12, r3
 
 	/* ---------------------------------------------------------------------
 	 * For !RESET_TO_SP_MIN systems, only the primary CPU ever reaches
@@ -88,8 +90,6 @@
 	 * Relay the previous bootloader's arguments to the platform layer
 	 * ---------------------------------------------------------------------
 	 */
-	mov	r0, r11
-	mov	r1, r12
 #else
 	/* ---------------------------------------------------------------------
 	 * For RESET_TO_SP_MIN systems which have a programmable reset address,
@@ -111,15 +111,22 @@
 	 * Zero the arguments passed to the platform layer to reflect that.
 	 * ---------------------------------------------------------------------
 	 */
-	mov	r0, #0
-	mov	r1, #0
+	mov	r9, #0
+	mov	r10, #0
+	mov	r11, #0
+	mov	r12, #0
+
 #endif /* RESET_TO_SP_MIN */
 
 #if SP_MIN_WITH_SECURE_FIQ
 	route_fiq_to_sp_min r4
 #endif
 
-	bl	sp_min_early_platform_setup
+	mov	r0, r9
+	mov	r1, r10
+	mov	r2, r11
+	mov	r3, r12
+	bl	sp_min_early_platform_setup2
 	bl	sp_min_plat_arch_setup
 
 	/* Jump to the main function */
diff --git a/common/desc_image_load.c b/common/desc_image_load.c
index e68e69c..672b80b 100644
--- a/common/desc_image_load.c
+++ b/common/desc_image_load.c
@@ -190,3 +190,65 @@
 
 	return &next_bl_params;
 }
+
+/*******************************************************************************
+ * This function populates the entry point information with the corresponding
+ * config file for all executable BL images described in bl_params.
+ ******************************************************************************/
+void populate_next_bl_params_config(bl_params_t *bl2_to_next_bl_params)
+{
+	bl_params_node_t *params_node;
+	unsigned int fw_config_id;
+	uintptr_t hw_config_base = 0, fw_config_base;
+	bl_mem_params_node_t *mem_params;
+
+	assert(bl2_to_next_bl_params != NULL);
+
+	/*
+	 * Get the `bl_mem_params_node_t` corresponding to HW_CONFIG
+	 * if available.
+	 */
+	mem_params = get_bl_mem_params_node(HW_CONFIG_ID);
+	if (mem_params != NULL)
+		hw_config_base = mem_params->image_info.image_base;
+
+	for (params_node = bl2_to_next_bl_params->head; params_node != NULL;
+			params_node = params_node->next_params_info) {
+
+		fw_config_base = 0;
+
+		switch (params_node->image_id) {
+		case BL31_IMAGE_ID:
+			fw_config_id = SOC_FW_CONFIG_ID;
+			break;
+		case BL32_IMAGE_ID:
+			fw_config_id = TOS_FW_CONFIG_ID;
+			break;
+		case BL33_IMAGE_ID:
+			fw_config_id = NT_FW_CONFIG_ID;
+			break;
+		default:
+			fw_config_id = INVALID_IMAGE_ID;
+			break;
+		}
+
+		if (fw_config_id != INVALID_IMAGE_ID) {
+			mem_params = get_bl_mem_params_node(fw_config_id);
+			if (mem_params != NULL)
+				fw_config_base = mem_params->image_info.image_base;
+		}
+
+		/*
+		 * Pass hw and tb_fw config addresses to next images. NOTE - for
+		 * EL3 runtime images (BL31 for AArch64 and BL32 for AArch32),
+		 * arg0 is already used by generic code.
+		 */
+		if (params_node == bl2_to_next_bl_params->head) {
+			params_node->ep_info->args.arg1 = fw_config_base;
+			params_node->ep_info->args.arg2 = hw_config_base;
+		} else {
+			params_node->ep_info->args.arg0 = fw_config_base;
+			params_node->ep_info->args.arg1 = hw_config_base;
+		}
+	}
+}
diff --git a/common/fdt_wrappers.c b/common/fdt_wrappers.c
new file mode 100644
index 0000000..1a726a8
--- /dev/null
+++ b/common/fdt_wrappers.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* Helper functions to offer easier navigation of Device Tree Blob */
+
+#include <assert.h>
+#include <debug.h>
+#include <fdt_wrappers.h>
+#include <libfdt.h>
+
+/*
+ * Read cells from a given property of the given node. At most 2 cells of the
+ * property are read, and pointer is updated. Returns 0 on success, and -1 upon
+ * error
+ */
+int fdtw_read_cells(const void *dtb, int node, const char *prop,
+		unsigned int cells, void *value)
+{
+	const uint32_t *value_ptr;
+	uint32_t hi = 0, lo;
+	int value_len;
+
+	assert(dtb != NULL);
+	assert(prop != NULL);
+	assert(value != NULL);
+	assert(node >= 0);
+
+	/* We expect either 1 or 2 cell property */
+	assert(cells <= 2U);
+
+	/* Access property and obtain its length (in bytes) */
+	value_ptr = fdt_getprop_namelen(dtb, node, prop, (int)strlen(prop),
+			&value_len);
+	if (value_ptr == NULL) {
+		WARN("Couldn't find property %s in dtb\n", prop);
+		return -1;
+	}
+
+
+	/* Verify that property length accords with cell length */
+	if (NCELLS((unsigned int)value_len) != cells) {
+		WARN("Property length mismatch\n");
+		return -1;
+	}
+
+	if (cells == 2U) {
+		hi = fdt32_to_cpu(*value_ptr);
+		value_ptr++;
+	}
+
+	lo = fdt32_to_cpu(*value_ptr);
+
+	if (cells == 2U)
+		*((uint64_t *) value) = ((uint64_t) hi << 32) | lo;
+	else
+		*((uint32_t *) value) = lo;
+
+	return 0;
+}
+
+/*
+ * Write cells in place to a given property of the given node. At most 2 cells
+ * of the property are written. Returns 0 on success, and -1 upon error.
+ */
+int fdtw_write_inplace_cells(void *dtb, int node, const char *prop,
+		unsigned int cells, void *value)
+{
+	int err, len;
+
+	assert(dtb != NULL);
+	assert(prop != NULL);
+	assert(value != NULL);
+	assert(node >= 0);
+
+	/* We expect either 1 or 2 cell property */
+	assert(cells <= 2U);
+
+	if (cells == 2U)
+		*(uint64_t *)value = cpu_to_fdt64(*(uint64_t *)value);
+	else
+		*(uint32_t *)value = cpu_to_fdt32(*(uint32_t *)value);
+
+	len = (int)cells * 4;
+
+	/* Set property value in place */
+	err = fdt_setprop_inplace(dtb, node, prop, value, len);
+	if (err != 0) {
+		WARN("Modify property %s failed with error %d\n", prop, err);
+		return -1;
+	}
+
+	return 0;
+}
diff --git a/docs/porting-guide.rst b/docs/porting-guide.rst
index de05e03..dbbd102 100644
--- a/docs/porting-guide.rst
+++ b/docs/porting-guide.rst
@@ -1179,25 +1179,6 @@
 
 This function helps fulfill requirements 4 and 5 above.
 
-Function : bl1\_init\_bl2\_mem\_layout() [optional]
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-::
-
-    Argument : meminfo *, meminfo *
-    Return   : void
-
-BL1 needs to tell the next stage the amount of secure RAM available
-for it to use. This information is populated in a ``meminfo``
-structure.
-
-Depending upon where BL2 has been loaded in secure RAM (determined by
-``BL2_BASE``), BL1 calculates the amount of free memory available for BL2 to use.
-BL1 also ensures that its data sections resident in secure RAM are not visible
-to BL2. An illustration of how this is done in ARM standard platforms is given
-in the **Memory layout on ARM development platforms** section in the
-`Firmware Design`_.
-
 Function : bl1\_plat\_prepare\_exit() [optional]
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -1264,24 +1245,24 @@
 
 ::
 
-    Argument : void
+    Argument : unsigned int image_id
     Return   : int
 
 This function can be used by the platforms to update/use image information
-for BL2. This function is currently invoked in BL1 before loading BL2,
-when LOAD\_IMAGE\_V2 is enabled.
+corresponding to ``image_id``. This function is invoked in BL1, both in cold
+boot and FWU code path, before loading the image.
 
 Function : bl1\_plat\_handle\_post\_image\_load() [optional]
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 ::
 
-    Argument : void
+    Argument : unsigned int image_id
     Return   : int
 
 This function can be used by the platforms to update/use image information
-for BL2. This function is currently invoked in BL1 after loading BL2,
-when LOAD\_IMAGE\_V2 is enabled.
+corresponding to ``image_id``. This function is invoked in BL1, both in cold
+boot and FWU code path, after loading and authenticating the image.
 
 Function : bl1\_plat\_fwu\_done() [optional]
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/drivers/auth/tbbr/tbbr_cot.c b/drivers/auth/tbbr/tbbr_cot.c
index 01d6fb5..6ad0059 100644
--- a/drivers/auth/tbbr/tbbr_cot.c
+++ b/drivers/auth/tbbr/tbbr_cot.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -27,6 +27,8 @@
  * established, we can reuse some of the buffers on different stages
  */
 static unsigned char tb_fw_hash_buf[HASH_DER_LEN];
+static unsigned char tb_fw_config_hash_buf[HASH_DER_LEN];
+static unsigned char hw_config_hash_buf[HASH_DER_LEN];
 static unsigned char scp_fw_hash_buf[HASH_DER_LEN];
 static unsigned char soc_fw_hash_buf[HASH_DER_LEN];
 static unsigned char tos_fw_hash_buf[HASH_DER_LEN];
@@ -70,6 +72,10 @@
 
 static auth_param_type_desc_t tb_fw_hash = AUTH_PARAM_TYPE_DESC(
 		AUTH_PARAM_HASH, TRUSTED_BOOT_FW_HASH_OID);
+static auth_param_type_desc_t tb_fw_config_hash = AUTH_PARAM_TYPE_DESC(
+		AUTH_PARAM_HASH, TRUSTED_BOOT_FW_CONFIG_HASH_OID);
+static auth_param_type_desc_t hw_config_hash = AUTH_PARAM_TYPE_DESC(
+		AUTH_PARAM_HASH, HW_CONFIG_HASH_OID);
 static auth_param_type_desc_t scp_fw_hash = AUTH_PARAM_TYPE_DESC(
 		AUTH_PARAM_HASH, SCP_FW_HASH_OID);
 static auth_param_type_desc_t soc_fw_hash = AUTH_PARAM_TYPE_DESC(
@@ -125,6 +131,20 @@
 					.ptr = (void *)tb_fw_hash_buf,
 					.len = (unsigned int)HASH_DER_LEN
 				}
+			},
+			[1] = {
+				.type_desc = &tb_fw_config_hash,
+				.data = {
+					.ptr = (void *)tb_fw_config_hash_buf,
+					.len = (unsigned int)HASH_DER_LEN
+				}
+			},
+			[2] = {
+				.type_desc = &hw_config_hash,
+				.data = {
+					.ptr = (void *)hw_config_hash_buf,
+					.len = (unsigned int)HASH_DER_LEN
+				}
 			}
 		}
 	},
@@ -142,6 +162,36 @@
 			}
 		}
 	},
+	/* HW Config */
+	[HW_CONFIG_ID] = {
+		.img_id = HW_CONFIG_ID,
+		.img_type = IMG_RAW,
+		.parent = &cot_desc[TRUSTED_BOOT_FW_CERT_ID],
+		.img_auth_methods = {
+			[0] = {
+				.type = AUTH_METHOD_HASH,
+				.param.hash = {
+					.data = &raw_data,
+					.hash = &hw_config_hash,
+				}
+			}
+		}
+	},
+	/* TB FW Config */
+	[TB_FW_CONFIG_ID] = {
+		.img_id = TB_FW_CONFIG_ID,
+		.img_type = IMG_RAW,
+		.parent = &cot_desc[TRUSTED_BOOT_FW_CERT_ID],
+		.img_auth_methods = {
+			[0] = {
+				.type = AUTH_METHOD_HASH,
+				.param.hash = {
+					.data = &raw_data,
+					.hash = &tb_fw_config_hash,
+				}
+			}
+		}
+	},
 	/*
 	 * Trusted key certificate
 	 */
diff --git a/fdts/fvp-base-gicv2-psci-aarch32.dts b/fdts/fvp-base-gicv2-psci-aarch32.dts
index 1560a00..87ac68d 100644
--- a/fdts/fvp-base-gicv2-psci-aarch32.dts
+++ b/fdts/fvp-base-gicv2-psci-aarch32.dts
@@ -279,7 +279,7 @@
 				<0 0 41 &gic 0 41 4>,
 				<0 0 42 &gic 0 42 4>;
 
-		/include/ "rtsm_ve-motherboard.dtsi"
+		/include/ "rtsm_ve-motherboard-aarch32.dtsi"
 	};
 
 	panels {
diff --git a/fdts/fvp-base-gicv3-psci-aarch32.dts b/fdts/fvp-base-gicv3-psci-aarch32.dts
index dd884f5..b914ca0 100644
--- a/fdts/fvp-base-gicv3-psci-aarch32.dts
+++ b/fdts/fvp-base-gicv3-psci-aarch32.dts
@@ -288,7 +288,7 @@
 				<0 0 41 &gic 0 0 0 41 4>,
 				<0 0 42 &gic 0 0 0 42 4>;
 
-		/include/ "rtsm_ve-motherboard.dtsi"
+		/include/ "rtsm_ve-motherboard-aarch32.dtsi"
 	};
 
 	panels {
diff --git a/fdts/rtsm_ve-motherboard-aarch32.dtsi b/fdts/rtsm_ve-motherboard-aarch32.dtsi
new file mode 100644
index 0000000..5afbc1e
--- /dev/null
+++ b/fdts/rtsm_ve-motherboard-aarch32.dtsi
@@ -0,0 +1,252 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+	motherboard {
+		arm,v2m-memory-map = "rs1";
+		compatible = "arm,vexpress,v2m-p1", "simple-bus";
+		#address-cells = <2>; /* SMB chipselect number and offset */
+		#size-cells = <1>;
+		#interrupt-cells = <1>;
+		ranges;
+
+		flash@0,00000000 {
+			compatible = "arm,vexpress-flash", "cfi-flash";
+			reg = <0 0x00000000 0x04000000>,
+			      <4 0x00000000 0x04000000>;
+			bank-width = <4>;
+		};
+
+		vram@2,00000000 {
+			compatible = "arm,vexpress-vram";
+			reg = <2 0x00000000 0x00800000>;
+		};
+
+		ethernet@2,02000000 {
+			compatible = "smsc,lan91c111";
+			reg = <2 0x02000000 0x10000>;
+			interrupts = <15>;
+		};
+
+		v2m_clk24mhz: clk24mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "v2m:clk24mhz";
+		};
+
+		v2m_refclk1mhz: refclk1mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+			clock-output-names = "v2m:refclk1mhz";
+		};
+
+		v2m_refclk32khz: refclk32khz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "v2m:refclk32khz";
+		};
+
+		iofpga@3,00000000 {
+			compatible = "arm,amba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 3 0 0x200000>;
+
+			v2m_sysreg: sysreg@010000 {
+				compatible = "arm,vexpress-sysreg";
+				reg = <0x010000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			v2m_sysctl: sysctl@020000 {
+				compatible = "arm,sp810", "arm,primecell";
+				reg = <0x020000 0x1000>;
+				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
+				clock-names = "refclk", "timclk", "apb_pclk";
+				#clock-cells = <1>;
+				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+			};
+
+			aaci@040000 {
+				compatible = "arm,pl041", "arm,primecell";
+				reg = <0x040000 0x1000>;
+				interrupts = <11>;
+				clocks = <&v2m_clk24mhz>;
+				clock-names = "apb_pclk";
+			};
+
+			mmci@050000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0x050000 0x1000>;
+				interrupts = <9 10>;
+				cd-gpios = <&v2m_sysreg 0 0>;
+				wp-gpios = <&v2m_sysreg 1 0>;
+				max-frequency = <12000000>;
+				vmmc-supply = <&v2m_fixed_3v3>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "mclk", "apb_pclk";
+			};
+
+			kmi@060000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x060000 0x1000>;
+				interrupts = <12>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+
+			kmi@070000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x070000 0x1000>;
+				interrupts = <13>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+
+			v2m_serial0: uart@090000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x090000 0x1000>;
+				interrupts = <5>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial1: uart@0a0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0a0000 0x1000>;
+				interrupts = <6>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial2: uart@0b0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0b0000 0x1000>;
+				interrupts = <7>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial3: uart@0c0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0c0000 0x1000>;
+				interrupts = <8>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			wdt@0f0000 {
+				compatible = "arm,sp805", "arm,primecell";
+				reg = <0x0f0000 0x1000>;
+				interrupts = <0>;
+				clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
+				clock-names = "wdogclk", "apb_pclk";
+			};
+
+			v2m_timer01: timer@110000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x110000 0x1000>;
+				interrupts = <2>;
+				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
+			};
+
+			v2m_timer23: timer@120000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x120000 0x1000>;
+				interrupts = <3>;
+				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
+			};
+
+			rtc@170000 {
+				compatible = "arm,pl031", "arm,primecell";
+				reg = <0x170000 0x1000>;
+				interrupts = <4>;
+				clocks = <&v2m_clk24mhz>;
+				clock-names = "apb_pclk";
+			};
+
+			clcd@1f0000 {
+				compatible = "arm,pl111", "arm,primecell";
+				reg = <0x1f0000 0x1000>;
+				interrupts = <14>;
+				clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
+				clock-names = "clcdclk", "apb_pclk";
+				mode = "XVGA";
+				use_dma = <0>;
+				framebuffer = <0x18000000 0x00180000>;
+			};
+
+			virtio_block@0130000 {
+				compatible = "virtio,mmio";
+				reg = <0x130000 0x1000>;
+				interrupts = <0x2a>;
+			};
+		};
+
+		v2m_fixed_3v3: fixedregulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		mcc {
+			compatible = "arm,vexpress,config-bus", "simple-bus";
+			arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+			v2m_oscclk1: osc@1 {
+				/* CLCD clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 1>;
+				freq-range = <23750000 63500000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk1";
+			};
+
+			/*
+			 * Not supported in FVP models
+			 *
+			 * reset@0 {
+			 * 	compatible = "arm,vexpress-reset";
+			 * 	arm,vexpress-sysreg,func = <5 0>;
+			 * };
+			 */
+
+			muxfpga@0 {
+				compatible = "arm,vexpress-muxfpga";
+				arm,vexpress-sysreg,func = <7 0>;
+			};
+
+			/*
+			 * Not used - Superseded by PSCI sys_poweroff
+			 *
+			 * shutdown@0 {
+			 * 	compatible = "arm,vexpress-shutdown";
+			 * 	arm,vexpress-sysreg,func = <8 0>;
+			 * };
+			 */
+
+			/*
+			 * Not used - Superseded by PSCI sys_reset
+			 *
+			 * reboot@0 {
+			 * 	compatible = "arm,vexpress-reboot";
+			 * 	arm,vexpress-sysreg,func = <9 0>;
+			 * };
+			 */
+
+			dvimode@0 {
+				compatible = "arm,vexpress-dvimode";
+				arm,vexpress-sysreg,func = <11 0>;
+			};
+		};
+	};
diff --git a/include/bl1/bl1.h b/include/bl1/bl1.h
index 1544523..b042100 100644
--- a/include/bl1/bl1.h
+++ b/include/bl1/bl1.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -71,5 +71,9 @@
 		(FWU_SMC_FID_END - FWU_SMC_FID_START + 1),\
 		assert_FWU_NUM_SMC_CALLS_mismatch);
 
+/* Utility functions */
+void bl1_calc_bl2_mem_layout(const meminfo_t *bl1_mem_layout,
+			meminfo_t *bl2_mem_layout);
+
 #endif /* __ASSEMBLY__ */
 #endif /* __BL1_FWU_H__ */
diff --git a/include/bl32/sp_min/platform_sp_min.h b/include/bl32/sp_min/platform_sp_min.h
index 6c7e0cc..8f6a82d 100644
--- a/include/bl32/sp_min/platform_sp_min.h
+++ b/include/bl32/sp_min/platform_sp_min.h
@@ -10,8 +10,12 @@
 /*******************************************************************************
  * Mandatory SP_MIN functions
  ******************************************************************************/
+#if !ERROR_DEPRECATED
 void sp_min_early_platform_setup(void *from_bl2,
 		void *plat_params_from_bl2);
+#endif
+void sp_min_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+		u_register_t arg2, u_register_t arg3);
 void sp_min_platform_setup(void);
 void sp_min_plat_runtime_setup(void);
 void sp_min_plat_arch_setup(void);
diff --git a/include/common/bl_common.h b/include/common/bl_common.h
index 8915ba0..6a249f5 100644
--- a/include/common/bl_common.h
+++ b/include/common/bl_common.h
@@ -9,6 +9,7 @@
 
 #include <ep_info.h>
 #include <param_header.h>
+#include <utils_def.h>
 
 #define UP	1
 #define DOWN	0
@@ -31,10 +32,10 @@
 #define IMAGE_STATE_EXECUTED			4
 #define IMAGE_STATE_INTERRUPTED			5
 
-#define IMAGE_ATTRIB_SKIP_LOADING	0x02
-#define IMAGE_ATTRIB_PLAT_SETUP		0x04
+#define IMAGE_ATTRIB_SKIP_LOADING	U(0x02)
+#define IMAGE_ATTRIB_PLAT_SETUP		U(0x04)
 
-#define INVALID_IMAGE_ID		(0xFFFFFFFF)
+#define INVALID_IMAGE_ID		U(0xFFFFFFFF)
 
 /*******************************************************************************
  * Constants to indicate type of exception to the common exception handler.
diff --git a/include/common/desc_image_load.h b/include/common/desc_image_load.h
index 79f2bd7..f183db5 100644
--- a/include/common/desc_image_load.h
+++ b/include/common/desc_image_load.h
@@ -33,7 +33,7 @@
 bl_mem_params_node_t *get_bl_mem_params_node(unsigned int image_id);
 bl_load_info_t *get_bl_load_info_from_mem_params_desc(void);
 bl_params_t *get_next_bl_params_from_mem_params_desc(void);
-
+void populate_next_bl_params_config(bl_params_t *bl2_to_next_bl_params);
 
 #endif /* LOAD_IMAGE_V2 */
 #endif /* __DESC_IMAGE_LOAD_H__ */
diff --git a/include/common/fdt_wrappers.h b/include/common/fdt_wrappers.h
new file mode 100644
index 0000000..18a6d10
--- /dev/null
+++ b/include/common/fdt_wrappers.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* Helper functions to offer easier navigation of Device Tree Blob */
+
+#ifndef __FDT_WRAPPERS__
+#define __FDT_WRAPPERS__
+
+/* Number of cells, given total length in bytes. Each cell is 4 bytes long */
+#define NCELLS(len) ((len) / 4)
+
+int fdtw_read_cells(const void *dtb, int node, const char *prop,
+		unsigned int cells, void *value);
+int fdtw_write_inplace_cells(void *dtb, int node, const char *prop,
+		unsigned int cells, void *value);
+#endif /* __FDT_WRAPPERS__ */
diff --git a/include/common/tbbr/tbbr_img_def.h b/include/common/tbbr/tbbr_img_def.h
index 3e68b64..060198b 100644
--- a/include/common/tbbr/tbbr_img_def.h
+++ b/include/common/tbbr/tbbr_img_def.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -60,4 +60,19 @@
 /* Secure Payload BL32_EXTRA2 (Trusted OS Extra2) */
 #define BL32_EXTRA2_IMAGE_ID		22
 
+/* HW_CONFIG (e.g. Kernel DT) */
+#define HW_CONFIG_ID		23
+
+/* TB_FW_CONFIG */
+#define TB_FW_CONFIG_ID		24
+
+/* SOC_FW_CONFIG */
+#define SOC_FW_CONFIG_ID	25
+
+/* TOS_FW_CONFIG */
+#define TOS_FW_CONFIG_ID	26
+
+/* NT_FW_CONFIG */
+#define NT_FW_CONFIG_ID		27
+
 #endif /* __TBBR_IMG_DEF_H__ */
diff --git a/include/plat/arm/board/common/board_arm_def.h b/include/plat/arm/board/common/board_arm_def.h
index 888629e..12a21fb 100644
--- a/include/plat/arm/board/common/board_arm_def.h
+++ b/include/plat/arm/board/common/board_arm_def.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
diff --git a/include/plat/arm/common/arm_def.h b/include/plat/arm/common/arm_def.h
index 697a0b0..9e6c7d2 100644
--- a/include/plat/arm/common/arm_def.h
+++ b/include/plat/arm/common/arm_def.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -306,6 +306,12 @@
  */
 #define CACHE_WRITEBACK_GRANULE		(1 << ARM_CACHE_WRITEBACK_SHIFT)
 
+/*
+ * To enable TB_FW_CONFIG to be loaded by BL1, define the corresponding base
+ * and limit. Leave enough space of BL2 meminfo.
+ */
+#define ARM_TB_FW_CONFIG_BASE		ARM_BL_RAM_BASE + sizeof(meminfo_t)
+#define ARM_TB_FW_CONFIG_LIMIT		BL2_LIMIT
 
 /*******************************************************************************
  * BL1 specific defines.
diff --git a/include/plat/arm/common/arm_dyn_cfg_helpers.h b/include/plat/arm/common/arm_dyn_cfg_helpers.h
new file mode 100644
index 0000000..4a0f639
--- /dev/null
+++ b/include/plat/arm/common/arm_dyn_cfg_helpers.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef __ARM_DYN_CFG_HELPERS_H__
+#define __ARM_DYN_CFG_HELPERS_H__
+
+#include <stdint.h>
+
+/* Function declaration */
+int arm_dyn_get_hwconfig_info(void *dtb, int node,
+		uint64_t *hw_config_addr, uint32_t *hw_config_size);
+int arm_dyn_tb_fw_cfg_init(void *dtb, int *node);
+
+#endif /* __ARM_DYN_CFG_HELPERS_H__ */
diff --git a/include/plat/arm/common/plat_arm.h b/include/plat/arm/common/plat_arm.h
index dfd7a20..b2c7bd2 100644
--- a/include/plat/arm/common/plat_arm.h
+++ b/include/plat/arm/common/plat_arm.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -19,6 +19,7 @@
 struct bl31_params;
 struct meminfo;
 struct image_info;
+struct bl_params;
 
 #define ARM_CASSERT_MMAP						\
 	CASSERT((ARRAY_SIZE(plat_arm_mmap) + ARM_BL_REGIONS)		\
@@ -138,7 +139,7 @@
 void arm_bl1_plat_arch_setup(void);
 
 /* BL2 utility functions */
-void arm_bl2_early_platform_setup(struct meminfo *mem_layout);
+void arm_bl2_early_platform_setup(uintptr_t tb_fw_config, struct meminfo *mem_layout);
 void arm_bl2_platform_setup(void);
 void arm_bl2_plat_arch_setup(void);
 uint32_t arm_get_spsr_for_bl32_entry(void);
@@ -157,11 +158,11 @@
 
 /* BL31 utility functions */
 #if LOAD_IMAGE_V2
-void arm_bl31_early_platform_setup(void *from_bl2,
-				void *plat_params_from_bl2);
+void arm_bl31_early_platform_setup(void *from_bl2, uintptr_t soc_fw_config,
+				uintptr_t hw_config, void *plat_params_from_bl2);
 #else
-void arm_bl31_early_platform_setup(struct bl31_params *from_bl2,
-				void *plat_params_from_bl2);
+void arm_bl31_early_platform_setup(struct bl31_params *from_bl2, uintptr_t soc_fw_config,
+				uintptr_t hw_config, void *plat_params_from_bl2);
 #endif /* LOAD_IMAGE_V2 */
 void arm_bl31_platform_setup(void);
 void arm_bl31_plat_runtime_setup(void);
@@ -171,13 +172,18 @@
 void arm_tsp_early_platform_setup(void);
 
 /* SP_MIN utility functions */
-void arm_sp_min_early_platform_setup(void *from_bl2,
-		void *plat_params_from_bl2);
+void arm_sp_min_early_platform_setup(void *from_bl2, uintptr_t tos_fw_config,
+				uintptr_t hw_config, void *plat_params_from_bl2);
 void arm_sp_min_plat_runtime_setup(void);
 
 /* FIP TOC validity check */
 int arm_io_is_toc_valid(void);
 
+/* Utility functions for Dynamic Config */
+void arm_load_tb_fw_config(void);
+void arm_bl2_set_tb_cfg_addr(void *dtb);
+void arm_bl2_dyn_cfg_init(void);
+
 /*
  * Mandatory functions required in ARM standard platforms
  */
diff --git a/include/plat/common/platform.h b/include/plat/common/platform.h
index e2f1cfd..411202d 100644
--- a/include/plat/common/platform.h
+++ b/include/plat/common/platform.h
@@ -134,9 +134,10 @@
 /*******************************************************************************
  * Optional BL1 functions (may be overridden)
  ******************************************************************************/
+#if !ERROR_DEPRECATED
 void bl1_init_bl2_mem_layout(const struct meminfo *bl1_mem_layout,
 			     struct meminfo *bl2_mem_layout);
-
+#endif
 /*
  * The following functions are used for image loading process in BL1.
  */
@@ -155,20 +156,20 @@
  */
 __dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved);
 
-#if LOAD_IMAGE_V2
 /*
- * This function can be used by the platforms to update/use image
- * information for BL2.
+ * This BL1 function can be used by the platforms to update/use image
+ * information for a given `image_id`.
  */
-int bl1_plat_handle_pre_image_load(void);
-int bl1_plat_handle_post_image_load(void);
-
-#endif /* LOAD_IMAGE_V2 */
+int bl1_plat_handle_pre_image_load(unsigned int image_id);
+int bl1_plat_handle_post_image_load(unsigned int image_id);
 
 /*******************************************************************************
  * Mandatory BL2 functions
  ******************************************************************************/
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3);
+#if !ERROR_DEPRECATED
 void bl2_early_platform_setup(struct meminfo *mem_layout);
+#endif
 void bl2_plat_arch_setup(void);
 void bl2_platform_setup(void);
 struct meminfo *bl2_plat_sec_mem_layout(void);
@@ -280,6 +281,7 @@
 /*******************************************************************************
  * Mandatory BL31 functions
  ******************************************************************************/
+#if !ERROR_DEPRECATED
 #if LOAD_IMAGE_V2
 void bl31_early_platform_setup(void *from_bl2,
 				void *plat_params_from_bl2);
@@ -287,6 +289,9 @@
 void bl31_early_platform_setup(struct bl31_params *from_bl2,
 				void *plat_params_from_bl2);
 #endif
+#endif /* ERROR_DEPRECATED */
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+		u_register_t arg2, u_register_t arg3);
 void bl31_plat_arch_setup(void);
 void bl31_platform_setup(void);
 void bl31_plat_runtime_setup(void);
diff --git a/include/tools_share/firmware_image_package.h b/include/tools_share/firmware_image_package.h
index c39e6f0..b7fac07 100644
--- a/include/tools_share/firmware_image_package.h
+++ b/include/tools_share/firmware_image_package.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -63,6 +63,11 @@
 	{0x11449fa4, 0x635e, 0x11e4, 0x87, 0x28, {0x3f, 0x05, 0x72, 0x2a, 0xf3, 0x3d} }
 #define UUID_NON_TRUSTED_FW_CONTENT_CERT \
 	{0xf3c1c48e, 0x635d, 0x11e4, 0xa7, 0xa9, {0x87, 0xee, 0x40, 0xb2, 0x3f, 0xa7} }
+/* Dynamic configs */
+#define UUID_HW_CONFIG \
+	{0xd9f1b808, 0xcfc9, 0x4993, 0xa9, 0x62, {0x6f, 0xbc, 0x6b, 0x72, 0x65, 0xcc} }
+#define UUID_TB_FW_CONFIG \
+	{0xff58046c, 0x6baf, 0x4f7d, 0x82, 0xed, {0xaa, 0x27, 0xbc, 0x69, 0xbf, 0xd2} }
 
 typedef struct fip_toc_header {
 	uint32_t	name;
diff --git a/include/tools_share/tbbr_oid.h b/include/tools_share/tbbr_oid.h
index e57790c..18ddbdc 100644
--- a/include/tools_share/tbbr_oid.h
+++ b/include/tools_share/tbbr_oid.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -41,7 +41,8 @@
 
 /* TrustedBootFirmwareHash - BL2 */
 #define TRUSTED_BOOT_FW_HASH_OID		"1.3.6.1.4.1.4128.2100.201"
-
+#define TRUSTED_BOOT_FW_CONFIG_HASH_OID		"1.3.6.1.4.1.4128.2100.202"
+#define HW_CONFIG_HASH_OID			"1.3.6.1.4.1.4128.2100.203"
 
 /*
  * Trusted Key Certificate
diff --git a/make_helpers/build_macros.mk b/make_helpers/build_macros.mk
index 9119dcd..eba9168 100644
--- a/make_helpers/build_macros.mk
+++ b/make_helpers/build_macros.mk
@@ -344,15 +344,18 @@
 
 endef
 
+# Convert device tree source file names to matching blobs
+#   $(1) = input dts
 define SOURCES_TO_DTBS
         $(notdir $(patsubst %.dts,%.dtb,$(filter %.dts,$(1))))
 endef
 
-# MAKE_FDT macro defines the targets and options to build each FDT binary
-# Arguments: (none)
-define MAKE_FDT
-        $(eval DTB_BUILD_DIR  := ${BUILD_PLAT}/fdts)
-        $(eval DTBS       := $(addprefix $(DTB_BUILD_DIR)/,$(call SOURCES_TO_DTBS,$(FDT_SOURCES))))
+# MAKE_FDT_DIRS macro creates the prerequisite directories that host the
+# FDT binaries
+#   $(1) = output directory
+#   $(2) = input dts
+define MAKE_FDT_DIRS
+        $(eval DTBS       := $(addprefix $(1)/,$(call SOURCES_TO_DTBS,$(2))))
         $(eval TEMP_DTB_DIRS := $(sort $(dir ${DTBS})))
         # The $(dir ) function leaves a trailing / on the directory names
         # Rip off the / to match directory names with make rule targets.
@@ -361,19 +364,18 @@
 $(eval $(foreach objd,${DTB_DIRS},$(call MAKE_PREREQ_DIR,${objd},${BUILD_DIR})))
 
 fdt_dirs: ${DTB_DIRS}
-
 endef
 
-# MAKE_DTB generate the Flattened device tree binary (device tree binary)
+# MAKE_DTB generate the Flattened device tree binary
 #   $(1) = output directory
 #   $(2) = input dts
 define MAKE_DTB
 
-$(eval DOBJ := $(1)/$(patsubst %.dts,%.dtb,$(notdir $(2))))
+$(eval DOBJ := $(addprefix $(1)/,$(call SOURCES_TO_DTBS,$(2))))
 $(eval DEP := $(patsubst %.dtb,%.d,$(DOBJ)))
 
 $(DOBJ): $(2) $(MAKEFILE_LIST) | fdt_dirs
-	@echo "  DTC      $$<"
+	@echo "  DTC     $$<"
 	$$(Q)$$(DTC) $$(DTC_FLAGS) -d $(DEP) -o $$@ $$<
 
 -include $(DEP)
@@ -386,7 +388,11 @@
 define MAKE_DTBS
         $(eval DOBJS := $(filter %.dts,$(2)))
         $(eval REMAIN := $(filter-out %.dts,$(2)))
+        $(and $(REMAIN),$(error FDT_SOURCES contain non-DTS files: $(REMAIN)))
         $(eval $(foreach obj,$(DOBJS),$(call MAKE_DTB,$(1),$(obj))))
 
-        $(and $(REMAIN),$(error Unexpected s present: $(REMAIN)))
+        $(eval $(call MAKE_FDT_DIRS,$(1),$(2)))
+
+dtbs: $(DTBS)
+all: dtbs
 endef
diff --git a/plat/arm/board/fvp/fdts/fvp_tb_fw_config.dts b/plat/arm/board/fvp/fdts/fvp_tb_fw_config.dts
new file mode 100644
index 0000000..5c24f94
--- /dev/null
+++ b/plat/arm/board/fvp/fdts/fvp_tb_fw_config.dts
@@ -0,0 +1,16 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+	/* Platform Config */
+	plat_arm_bl2 {
+		compatible = "arm,tb_fw";
+		hw_config_addr = <0x0 0x82000000>;
+		hw_config_max_size = <0x01000000>;
+	};
+};
diff --git a/plat/arm/board/fvp/fvp_bl2_setup.c b/plat/arm/board/fvp/fvp_bl2_setup.c
index e9c4ab5..0a3b67d 100644
--- a/plat/arm/board/fvp/fvp_bl2_setup.c
+++ b/plat/arm/board/fvp/fvp_bl2_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -7,15 +7,15 @@
 #include <generic_delay_timer.h>
 #include <mmio.h>
 #include <plat_arm.h>
+#include <platform.h>
 #include <sp804_delay_timer.h>
 #include <v2m_def.h>
 #include "fvp_def.h"
 #include "fvp_private.h"
 
-
-void bl2_early_platform_setup(meminfo_t *mem_layout)
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3)
 {
-	arm_bl2_early_platform_setup(mem_layout);
+	arm_bl2_early_platform_setup((uintptr_t)arg0, (meminfo_t *)arg1);
 
 	/* Initialize the platform config for future decision making */
 	fvp_config_setup();
diff --git a/plat/arm/board/fvp/fvp_bl31_setup.c b/plat/arm/board/fvp/fvp_bl31_setup.c
index 181c923..bcba60a 100644
--- a/plat/arm/board/fvp/fvp_bl31_setup.c
+++ b/plat/arm/board/fvp/fvp_bl31_setup.c
@@ -1,23 +1,19 @@
 /*
- * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
 #include <arm_config.h>
 #include <plat_arm.h>
+#include <platform.h>
 #include <smmu_v3.h>
 #include "fvp_private.h"
 
-#if LOAD_IMAGE_V2
-void bl31_early_platform_setup(void *from_bl2,
-				void *plat_params_from_bl2)
-#else
-void bl31_early_platform_setup(bl31_params_t *from_bl2,
-				void *plat_params_from_bl2)
-#endif
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+		u_register_t arg2, u_register_t arg3)
 {
-	arm_bl31_early_platform_setup(from_bl2, plat_params_from_bl2);
+	arm_bl31_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
 
 	/* Initialize the platform config for future decision making */
 	fvp_config_setup();
diff --git a/plat/arm/board/fvp/fvp_io_storage.c b/plat/arm/board/fvp/fvp_io_storage.c
index aa2ee30..11c7c3b 100644
--- a/plat/arm/board/fvp/fvp_io_storage.c
+++ b/plat/arm/board/fvp/fvp_io_storage.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -18,6 +18,8 @@
 #define BL31_IMAGE_NAME			"bl31.bin"
 #define BL32_IMAGE_NAME			"bl32.bin"
 #define BL33_IMAGE_NAME			"bl33.bin"
+#define TB_FW_CONFIG_NAME		"fvp_tb_fw_config.dtb"
+#define HW_CONFIG_NAME			"hw_config.dtb"
 
 #if TRUSTED_BOARD_BOOT
 #define TRUSTED_BOOT_FW_CERT_NAME	"tb_fw.crt"
@@ -51,6 +53,14 @@
 		.path = BL33_IMAGE_NAME,
 		.mode = FOPEN_MODE_RB
 	},
+	[TB_FW_CONFIG_ID] = {
+		.path = TB_FW_CONFIG_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[HW_CONFIG_ID] = {
+		.path = HW_CONFIG_NAME,
+		.mode = FOPEN_MODE_RB
+	},
 #if TRUSTED_BOARD_BOOT
 	[TRUSTED_BOOT_FW_CERT_ID] = {
 		.path = TRUSTED_BOOT_FW_CERT_NAME,
diff --git a/plat/arm/board/fvp/platform.mk b/plat/arm/board/fvp/platform.mk
index a257784..4164242 100644
--- a/plat/arm/board/fvp/platform.mk
+++ b/plat/arm/board/fvp/platform.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@@ -16,6 +16,8 @@
 # Default number of threads per CPU on FVP
 FVP_MAX_PE_PER_CPU	:= 1
 
+FVP_DT_PREFIX		:= fvp-base-gicv3-psci
+
 $(eval $(call assert_boolean,FVP_USE_SP804_TIMER))
 $(eval $(call add_define,FVP_USE_SP804_TIMER))
 
@@ -59,6 +61,9 @@
 				drivers/arm/gic/v2/gicv2_helpers.c	\
 				plat/common/plat_gicv2.c		\
 				plat/arm/common/arm_gicv2.c
+
+FVP_DT_PREFIX		:=	fvp-base-gicv2-psci
+
 else ifeq (${FVP_USE_GIC_DRIVER}, FVP_GICV3_LEGACY)
   ifeq (${ARCH}, aarch32)
     $(error "GICV3 Legacy driver not supported for AArch32 build")
@@ -68,6 +73,9 @@
 				drivers/arm/gic/gic_v3.c		\
 				plat/common/plat_gic.c			\
 				plat/arm/common/arm_gicv3_legacy.c
+
+FVP_DT_PREFIX		:=	fvp-base-gicv2-psci
+
 else
 $(error "Incorrect GIC driver chosen on FVP port")
 endif
@@ -151,6 +159,20 @@
 				${FVP_INTERCONNECT_SOURCES}			\
 				${FVP_SECURITY_SOURCES}
 
+# Add the FDT_SOURCES and options for Dynamic Config
+FVP_HW_CONFIG_DTS	:=	fdts/${FVP_DT_PREFIX}.dts
+FDT_SOURCES		+=	plat/arm/board/fvp/fdts/${PLAT}_tb_fw_config.dts
+FVP_TB_FW_CONFIG	:=	${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
+
+# Add the TB_FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_TB_FW_CONFIG},--tb-fw-config))
+
+FDT_SOURCES		+=	${FVP_HW_CONFIG_DTS}
+$(eval FVP_HW_CONFIG	:=	${BUILD_PLAT}/$(patsubst %.dts,%.dtb,$(FVP_HW_CONFIG_DTS)))
+
+# Add the HW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_HW_CONFIG},--hw-config))
+
 # Disable the PSCI platform compatibility layer
 ENABLE_PLAT_COMPAT	:= 	0
 
diff --git a/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c b/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c
index b924636..6cced4d 100644
--- a/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c
+++ b/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -7,10 +7,10 @@
 #include <plat_arm.h>
 #include "../fvp_private.h"
 
-void sp_min_early_platform_setup(void *from_bl2,
-		void *plat_params_from_bl2)
+void sp_min_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+			u_register_t arg2, u_register_t arg3)
 {
-	arm_sp_min_early_platform_setup(from_bl2, plat_params_from_bl2);
+	arm_sp_min_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
 
 	/* Initialize the platform config for future decision making */
 	fvp_config_setup();
diff --git a/plat/arm/board/juno/include/platform_def.h b/plat/arm/board/juno/include/platform_def.h
index cac47f7..2e2fdd7 100644
--- a/plat/arm/board/juno/include/platform_def.h
+++ b/plat/arm/board/juno/include/platform_def.h
@@ -110,12 +110,12 @@
  */
 #if TRUSTED_BOARD_BOOT
 #if TF_MBEDTLS_KEY_ALG_ID == TF_MBEDTLS_RSA_AND_ECDSA
-# define PLAT_ARM_MAX_BL2_SIZE		0x1E000
+# define PLAT_ARM_MAX_BL2_SIZE		0x1F000
 #else
-# define PLAT_ARM_MAX_BL2_SIZE		0x1A000
+# define PLAT_ARM_MAX_BL2_SIZE		0x1B000
 #endif
 #else
-# define PLAT_ARM_MAX_BL2_SIZE		0xC000
+# define PLAT_ARM_MAX_BL2_SIZE		0xD000
 #endif
 
 /*
diff --git a/plat/arm/common/aarch32/arm_bl2_mem_params_desc.c b/plat/arm/common/aarch32/arm_bl2_mem_params_desc.c
index 7fd42aa..890f2c9 100644
--- a/plat/arm/common/aarch32/arm_bl2_mem_params_desc.c
+++ b/plat/arm/common/aarch32/arm_bl2_mem_params_desc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -54,7 +54,15 @@
 
 	    .next_handoff_image_id = BL33_IMAGE_ID,
     },
-
+	/* Fill HW_CONFIG related information if it exists */
+    {
+	    .image_id = HW_CONFIG_ID,
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+		    VERSION_2, entry_point_info_t, NON_SECURE | NON_EXECUTABLE),
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+	    .next_handoff_image_id = INVALID_IMAGE_ID,
+    },
 	/* Fill BL33 related information */
     {
 	    .image_id = BL33_IMAGE_ID,
diff --git a/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c b/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c
index 4376119..fef01c9 100644
--- a/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c
+++ b/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -68,7 +68,7 @@
 	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
 		    DISABLE_ALL_EXCEPTIONS),
 #if DEBUG
-	    .ep_info.args.arg1 = ARM_BL31_PLAT_PARAM_VAL,
+	    .ep_info.args.arg3 = ARM_BL31_PLAT_PARAM_VAL,
 #endif
 
 	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
@@ -82,7 +82,15 @@
 	    .next_handoff_image_id = BL33_IMAGE_ID,
 # endif
     },
-
+	/* Fill HW_CONFIG related information */
+    {
+	    .image_id = HW_CONFIG_ID,
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+		    VERSION_2, entry_point_info_t, NON_SECURE | NON_EXECUTABLE),
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+	    .next_handoff_image_id = INVALID_IMAGE_ID,
+    },
 # ifdef BL32_BASE
 	/* Fill BL32 related information */
     {
diff --git a/plat/arm/common/arm_bl1_setup.c b/plat/arm/common/arm_bl1_setup.c
index 6860e36..0b9c9ee 100644
--- a/plat/arm/common/arm_bl1_setup.c
+++ b/plat/arm/common/arm_bl1_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -115,6 +115,9 @@
 {
 	/* Initialise the IO layer and register platform IO devices */
 	plat_arm_io_setup();
+#if LOAD_IMAGE_V2
+	arm_load_tb_fw_config();
+#endif
 }
 
 void bl1_platform_setup(void)
diff --git a/plat/arm/common/arm_bl2_setup.c b/plat/arm/common/arm_bl2_setup.c
index 906ed19..7add61d 100644
--- a/plat/arm/common/arm_bl2_setup.c
+++ b/plat/arm/common/arm_bl2_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -39,7 +39,7 @@
 CASSERT(BL2_BASE >= (ARM_BL_RAM_BASE + BL1_MEMINFO_OFFSET), assert_bl2_base_overflows);
 
 /* Weak definitions may be overridden in specific ARM standard platform */
-#pragma weak bl2_early_platform_setup
+#pragma weak bl2_early_platform_setup2
 #pragma weak bl2_platform_setup
 #pragma weak bl2_plat_arch_setup
 #pragma weak bl2_plat_sec_mem_layout
@@ -169,7 +169,7 @@
 struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
 {
 #if DEBUG
-	bl31_params_mem.bl31_ep_info.args.arg1 = ARM_BL31_PLAT_PARAM_VAL;
+	bl31_params_mem.bl31_ep_info.args.arg3 = ARM_BL31_PLAT_PARAM_VAL;
 #endif
 
 	return &bl31_params_mem.bl31_ep_info;
@@ -181,7 +181,7 @@
  * in x0. This memory layout is sitting at the base of the free trusted SRAM.
  * Copy it to a safe location before its reclaimed by later BL2 functionality.
  ******************************************************************************/
-void arm_bl2_early_platform_setup(meminfo_t *mem_layout)
+void arm_bl2_early_platform_setup(uintptr_t tb_fw_config, meminfo_t *mem_layout)
 {
 	/* Initialize the console to provide early debug support */
 	console_init(PLAT_ARM_BOOT_UART_BASE, PLAT_ARM_BOOT_UART_CLK_IN_HZ,
@@ -192,11 +192,17 @@
 
 	/* Initialise the IO layer and register platform IO devices */
 	plat_arm_io_setup();
+
+#if LOAD_IMAGE_V2
+	if (tb_fw_config != 0U)
+		arm_bl2_set_tb_cfg_addr((void *)tb_fw_config);
+#endif
 }
 
-void bl2_early_platform_setup(meminfo_t *mem_layout)
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3)
 {
-	arm_bl2_early_platform_setup(mem_layout);
+	arm_bl2_early_platform_setup((uintptr_t)arg0, (meminfo_t *)arg1);
+
 	generic_delay_timer_init();
 }
 
@@ -205,6 +211,10 @@
  */
 void arm_bl2_platform_setup(void)
 {
+#if LOAD_IMAGE_V2
+	arm_bl2_dyn_cfg_init();
+#endif
+
 	/* Initialize the secure environment */
 	plat_arm_security_setup();
 
diff --git a/plat/arm/common/arm_bl31_setup.c b/plat/arm/common/arm_bl31_setup.c
index 8fba80b..963c4d2 100644
--- a/plat/arm/common/arm_bl31_setup.c
+++ b/plat/arm/common/arm_bl31_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -26,7 +26,7 @@
 
 
 /* Weak definitions may be overridden in specific ARM standard platform */
-#pragma weak bl31_early_platform_setup
+#pragma weak bl31_early_platform_setup2
 #pragma weak bl31_platform_setup
 #pragma weak bl31_plat_arch_setup
 #pragma weak bl31_plat_get_next_image_ep_info
@@ -64,11 +64,11 @@
  * we are guaranteed to pick up good data.
  ******************************************************************************/
 #if LOAD_IMAGE_V2
-void arm_bl31_early_platform_setup(void *from_bl2,
-				void *plat_params_from_bl2)
+void arm_bl31_early_platform_setup(void *from_bl2, uintptr_t soc_fw_config,
+				uintptr_t hw_config, void *plat_params_from_bl2)
 #else
-void arm_bl31_early_platform_setup(bl31_params_t *from_bl2,
-				void *plat_params_from_bl2)
+void arm_bl31_early_platform_setup(bl31_params_t *from_bl2, uintptr_t soc_fw_config,
+				uintptr_t hw_config, void *plat_params_from_bl2)
 #endif
 {
 	/* Initialize the console to provide early debug support */
@@ -152,6 +152,10 @@
 	assert(from_bl2->h.type == PARAM_BL31);
 	assert(from_bl2->h.version >= VERSION_1);
 
+	/* Dynamic Config is not supported for LOAD_IMAGE_V1 */
+	assert(soc_fw_config == 0);
+	assert(hw_config == 0);
+
 	/*
 	 * Copy BL32 (if populated by BL2) and BL33 entry point information.
 	 * They are stored in Secure RAM, in BL2's address space.
@@ -164,15 +168,10 @@
 #endif /* RESET_TO_BL31 */
 }
 
-#if LOAD_IMAGE_V2
-void bl31_early_platform_setup(void *from_bl2,
-				void *plat_params_from_bl2)
-#else
-void bl31_early_platform_setup(bl31_params_t *from_bl2,
-				void *plat_params_from_bl2)
-#endif
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+		u_register_t arg2, u_register_t arg3)
 {
-	arm_bl31_early_platform_setup(from_bl2, plat_params_from_bl2);
+	arm_bl31_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
 
 	/*
 	 * Initialize Interconnect for this cluster during cold boot.
diff --git a/plat/arm/common/arm_common.mk b/plat/arm/common/arm_common.mk
index 48e7071..b3462ab 100644
--- a/plat/arm/common/arm_common.mk
+++ b/plat/arm/common/arm_common.mk
@@ -136,6 +136,7 @@
 				drivers/io/io_memmap.c				\
 				drivers/io/io_storage.c				\
 				plat/arm/common/arm_bl1_setup.c			\
+				plat/arm/common/arm_dyn_cfg.c			\
 				plat/arm/common/arm_io_storage.c
 ifdef EL3_PAYLOAD_BASE
 # Need the arm_program_trusted_mailbox() function to release secondary CPUs from
@@ -151,6 +152,13 @@
 				plat/arm/common/arm_bl2_setup.c			\
 				plat/arm/common/arm_io_storage.c
 
+# Add `libfdt` and Arm common helpers required for Dynamic Config
+include lib/libfdt/libfdt.mk
+BL2_SOURCES		+=	plat/arm/common/arm_dyn_cfg.c		\
+				plat/arm/common/arm_dyn_cfg_helpers.c	\
+				common/fdt_wrappers.c			\
+				${LIBFDT_SRCS}
+
 ifeq (${BL2_AT_EL3},1)
 BL2_SOURCES		+=	plat/arm/common/arm_bl2_el3_setup.c
 endif
diff --git a/plat/arm/common/arm_dyn_cfg.c b/plat/arm/common/arm_dyn_cfg.c
new file mode 100644
index 0000000..02f995f
--- /dev/null
+++ b/plat/arm/common/arm_dyn_cfg.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arm_dyn_cfg_helpers.h>
+#include <assert.h>
+#include <debug.h>
+#include <desc_image_load.h>
+#include <plat_arm.h>
+#include <platform.h>
+#include <platform_def.h>
+#include <string.h>
+#include <tbbr_img_def.h>
+
+#if LOAD_IMAGE_V2
+
+/* Variable to store the address to TB_FW_CONFIG passed from BL1 */
+static void *tb_fw_cfg_dtb;
+
+/*
+ * Helper function to load TB_FW_CONFIG and populate the load information to
+ * arg0 of BL2 entrypoint info.
+ */
+void arm_load_tb_fw_config(void)
+{
+	int err;
+	uintptr_t config_base = 0;
+	image_desc_t *image_desc;
+
+	image_desc_t arm_tb_fw_info = {
+		.image_id = TB_FW_CONFIG_ID,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+				VERSION_2, image_info_t, 0),
+		.image_info.image_base = ARM_TB_FW_CONFIG_BASE,
+		.image_info.image_max_size = ARM_TB_FW_CONFIG_LIMIT - ARM_TB_FW_CONFIG_BASE,
+	};
+
+	VERBOSE("BL1: Loading TB_FW_CONFIG\n");
+	err = load_auth_image(TB_FW_CONFIG_ID, &arm_tb_fw_info.image_info);
+	if (err != 0) {
+		/* Return if TB_FW_CONFIG is not loaded */
+		VERBOSE("Failed to load TB_FW_CONFIG\n");
+		return;
+	}
+
+	config_base = arm_tb_fw_info.image_info.image_base;
+
+	/* The BL2 ep_info arg0 is modified to point to TB_FW_CONFIG */
+	image_desc = bl1_plat_get_image_desc(BL2_IMAGE_ID);
+	assert(image_desc != NULL);
+	image_desc->ep_info.args.arg0 = config_base;
+
+	INFO("BL1: TB_FW_CONFIG loaded at address = %p\n",
+			(void *) config_base);
+}
+
+/*
+ * BL2 utility function to set the address of TB_FW_CONFIG passed from BL1.
+ */
+void arm_bl2_set_tb_cfg_addr(void *dtb)
+{
+	assert(dtb != NULL);
+	tb_fw_cfg_dtb = dtb;
+}
+
+/*
+ * BL2 utility function to initialize dynamic configuration specified by
+ * TB_FW_CONFIG. Return early if TB_FW_CONFIG is not found or HW_CONFIG is
+ * not specified in TB_FW_CONFIG.
+ */
+void arm_bl2_dyn_cfg_init(void)
+{
+	int err = 0;
+	int tb_fw_node;
+	bl_mem_params_node_t *hw_cfg_mem_params = NULL;
+
+	if (tb_fw_cfg_dtb == NULL) {
+		VERBOSE("No TB_FW_CONFIG specified\n");
+		return;
+	}
+
+	err = arm_dyn_tb_fw_cfg_init((void *)tb_fw_cfg_dtb, &tb_fw_node);
+	if (err < 0) {
+		ERROR("Invalid TB_FW_CONFIG passed from BL1\n");
+		panic();
+	}
+
+	/* Get the hw_config load address and size from TB_FW_CONFIG */
+	hw_cfg_mem_params = get_bl_mem_params_node(HW_CONFIG_ID);
+	if (hw_cfg_mem_params == NULL) {
+		VERBOSE("Couldn't find HW_CONFIG in bl_mem_params_node\n");
+		return;
+	}
+
+	err = arm_dyn_get_hwconfig_info((void *)tb_fw_cfg_dtb, tb_fw_node,
+		(uint64_t *) &hw_cfg_mem_params->image_info.image_base,
+		&hw_cfg_mem_params->image_info.image_max_size);
+	if (err < 0) {
+		VERBOSE("Couldn't find HW_CONFIG load info in TB_FW_CONFIG\n");
+		return;
+	}
+
+	/* Remove the IMAGE_ATTRIB_SKIP_LOADING attribute from HW_CONFIG node */
+	hw_cfg_mem_params->image_info.h.attr &= ~IMAGE_ATTRIB_SKIP_LOADING;
+}
+
+#endif /* LOAD_IMAGE_V2 */
diff --git a/plat/arm/common/arm_dyn_cfg_helpers.c b/plat/arm/common/arm_dyn_cfg_helpers.c
new file mode 100644
index 0000000..cfcbf2a
--- /dev/null
+++ b/plat/arm/common/arm_dyn_cfg_helpers.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <desc_image_load.h>
+#include <fdt_wrappers.h>
+#include <libfdt.h>
+#include <plat_arm.h>
+
+/*******************************************************************************
+ * Helper to read the `hw_config` property in config DTB. This function
+ * expects the following properties to be present in the config DTB.
+ *	name : hw_config_addr		size : 2 cells
+ *	name : hw_config_max_size	size : 1 cell
+ *
+ * Arguments:
+ *	void *dtb		 - pointer to the TB_FW_CONFIG in memory
+ *	int node		 - The node offset to appropriate node in the
+ *					 DTB.
+ *	uint64_t *hw_config_addr - Returns the `hw_config` load address if read
+ *					 is successful.
+ *	uint32_t *hw_config_size - Returns the `hw_config` size if read is
+ *					 successful.
+ *
+ * Returns 0 on success and -1 on error.
+ ******************************************************************************/
+int arm_dyn_get_hwconfig_info(void *dtb, int node,
+		uint64_t *hw_config_addr, uint32_t *hw_config_size)
+{
+	int err;
+
+	assert(dtb != NULL);
+	assert(hw_config_addr != NULL);
+	assert(hw_config_size != NULL);
+
+	/* Check if the pointer to DT is correct */
+	assert(fdt_check_header(dtb) == 0);
+
+	/* Assert the node offset point to "arm,tb_fw" compatible property */
+	assert(node == fdt_node_offset_by_compatible(dtb, -1, "arm,tb_fw"));
+
+	err = fdtw_read_cells(dtb, node, "hw_config_addr", 2,
+				(void *) hw_config_addr);
+	if (err < 0) {
+		WARN("Read cell failed for hw_config_addr\n");
+		return -1;
+	}
+
+	err = fdtw_read_cells(dtb, node, "hw_config_max_size", 1,
+				(void *) hw_config_size);
+	if (err < 0) {
+		WARN("Read cell failed for hw_config_max_size\n");
+		return -1;
+	}
+
+	VERBOSE("Dyn cfg: Read hw_config address from TB_FW_CONFIG 0x%p %p\n",
+				hw_config_addr, hw_config_size);
+
+	return 0;
+}
+
+/*******************************************************************************
+ * Validate the tb_fw_config is a valid DTB file and returns the node offset
+ * to "arm,tb_fw" property.
+ * Arguments:
+ *	void *dtb - pointer to the TB_FW_CONFIG in memory
+ *	int *node - Returns the node offset to "arm,tb_fw" property if found.
+ *
+ * Returns 0 on success and -1 on error.
+ ******************************************************************************/
+int arm_dyn_tb_fw_cfg_init(void *dtb, int *node)
+{
+	assert(dtb != NULL);
+	assert(node != NULL);
+
+	/* Check if the pointer to DT is correct */
+	if (fdt_check_header(dtb) != 0) {
+		WARN("Invalid DTB file passed as TB_FW_CONFIG\n");
+		return -1;
+	}
+
+	/* Assert the node offset point to "arm,tb_fw" compatible property */
+	*node = fdt_node_offset_by_compatible(dtb, -1, "arm,tb_fw");
+	if (*node < 0) {
+		WARN("The compatible property `arm,tb_fw` not found in the config\n");
+		return -1;
+	}
+
+	VERBOSE("Dyn cfg: Found \"arm,tb_fw\" in the config\n");
+	return 0;
+}
diff --git a/plat/arm/common/arm_image_load.c b/plat/arm/common/arm_image_load.c
index 03e4b4f..916fa8d 100644
--- a/plat/arm/common/arm_image_load.c
+++ b/plat/arm/common/arm_image_load.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -7,6 +7,7 @@
 #include <arm_def.h>
 #include <bl_common.h>
 #include <desc_image_load.h>
+#include <plat_arm.h>
 #include <platform.h>
 
 
@@ -37,5 +38,8 @@
  ******************************************************************************/
 bl_params_t *plat_get_next_bl_params(void)
 {
-	return get_next_bl_params_from_mem_params_desc();
+	bl_params_t *next_bl_params = get_next_bl_params_from_mem_params_desc();
+
+	populate_next_bl_params_config(next_bl_params);
+	return next_bl_params;
 }
diff --git a/plat/arm/common/arm_io_storage.c b/plat/arm/common/arm_io_storage.c
index 794ef61..5cabc54 100644
--- a/plat/arm/common/arm_io_storage.c
+++ b/plat/arm/common/arm_io_storage.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -53,6 +53,14 @@
 	.uuid = UUID_NON_TRUSTED_FIRMWARE_BL33,
 };
 
+static const io_uuid_spec_t tb_fw_config_uuid_spec = {
+	.uuid = UUID_TB_FW_CONFIG,
+};
+
+static const io_uuid_spec_t hw_config_uuid_spec = {
+	.uuid = UUID_HW_CONFIG,
+};
+
 #if TRUSTED_BOARD_BOOT
 static const io_uuid_spec_t tb_fw_cert_uuid_spec = {
 	.uuid = UUID_TRUSTED_BOOT_FW_CERT,
@@ -147,6 +155,16 @@
 		(uintptr_t)&bl33_uuid_spec,
 		open_fip
 	},
+	[TB_FW_CONFIG_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&tb_fw_config_uuid_spec,
+		open_fip
+	},
+	[HW_CONFIG_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&hw_config_uuid_spec,
+		open_fip
+	},
 #if TRUSTED_BOARD_BOOT
 	[TRUSTED_BOOT_FW_CERT_ID] = {
 		&fip_dev_handle,
diff --git a/plat/arm/common/sp_min/arm_sp_min_setup.c b/plat/arm/common/sp_min/arm_sp_min_setup.c
index c5408c8..1776d46 100644
--- a/plat/arm/common/sp_min/arm_sp_min_setup.c
+++ b/plat/arm/common/sp_min/arm_sp_min_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -18,7 +18,7 @@
 static entry_point_info_t bl33_image_ep_info;
 
 /* Weak definitions may be overridden in specific ARM standard platform */
-#pragma weak sp_min_early_platform_setup
+#pragma weak sp_min_early_platform_setup2
 #pragma weak sp_min_platform_setup
 #pragma weak sp_min_plat_arch_setup
 
@@ -48,8 +48,8 @@
 /*******************************************************************************
  * Perform early platform setup.
  ******************************************************************************/
-void arm_sp_min_early_platform_setup(void *from_bl2,
-		void *plat_params_from_bl2)
+void arm_sp_min_early_platform_setup(void *from_bl2, uintptr_t tos_fw_config,
+			uintptr_t hw_config, void *plat_params_from_bl2)
 {
 	/* Initialize the console to provide early debug support */
 	console_init(PLAT_ARM_BOOT_UART_BASE, PLAT_ARM_BOOT_UART_CLK_IN_HZ,
@@ -105,10 +105,10 @@
 
 }
 
-void sp_min_early_platform_setup(void *from_bl2,
-		void *plat_params_from_bl2)
+void sp_min_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+			u_register_t arg2, u_register_t arg3)
 {
-	arm_sp_min_early_platform_setup(from_bl2, plat_params_from_bl2);
+	arm_sp_min_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
 
 	/*
 	 * Initialize Interconnect for this cluster during cold boot.
diff --git a/plat/arm/css/common/css_bl2_setup.c b/plat/arm/css/common/css_bl2_setup.c
index b4aafd4..33e7b2e 100644
--- a/plat/arm/css/common/css_bl2_setup.c
+++ b/plat/arm/css/common/css_bl2_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -60,9 +60,10 @@
 
 static unsigned int scp_boot_config;
 
-void bl2_early_platform_setup(meminfo_t *mem_layout)
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+			u_register_t arg2, u_register_t arg3)
 {
-	arm_bl2_early_platform_setup(mem_layout);
+	arm_bl2_early_platform_setup((uintptr_t)arg0, (meminfo_t *)arg1);
 
 	/* Save SCP Boot config before it gets overwritten by SCP_BL2 loading */
 	scp_boot_config = mmio_read_32(SCP_BOOT_CFG_ADDR);
diff --git a/plat/common/aarch32/plat_common.c b/plat/common/aarch32/plat_common.c
index d3799d2..c023869 100644
--- a/plat/common/aarch32/plat_common.c
+++ b/plat/common/aarch32/plat_common.c
@@ -1,11 +1,12 @@
 /*
- * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
 #include <console.h>
 #include <platform.h>
+#include <platform_sp_min.h>
 #include <xlat_mmu_helpers.h>
 
 /*
@@ -29,3 +30,14 @@
 	 */
 	console_uninit();
 }
+
+#if !ERROR_DEPRECATED
+
+#pragma weak sp_min_early_platform_setup2
+
+void sp_min_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+			u_register_t arg2, u_register_t arg3)
+{
+	sp_min_early_platform_setup((void *) arg0, (void *)arg1);
+}
+#endif
diff --git a/plat/common/aarch64/plat_common.c b/plat/common/aarch64/plat_common.c
index cfc0c4f..080d356 100644
--- a/plat/common/aarch64/plat_common.c
+++ b/plat/common/aarch64/plat_common.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -20,6 +20,7 @@
 #pragma weak bl31_plat_runtime_setup
 #if !ERROR_DEPRECATED
 #pragma weak plat_get_syscnt_freq2
+#pragma weak bl31_early_platform_setup2
 #endif /* ERROR_DEPRECATED */
 
 #if SDEI_SUPPORT
@@ -70,6 +71,12 @@
 
 	return (unsigned int)freq;
 }
+
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+			u_register_t arg2, u_register_t arg3)
+{
+	bl31_early_platform_setup((void *) arg0, (void *)arg1);
+}
 #endif /* ERROR_DEPRECATED */
 
 #if SDEI_SUPPORT
diff --git a/plat/common/plat_bl1_common.c b/plat/common/plat_bl1_common.c
index b92cf54..4b1f233 100644
--- a/plat/common/plat_bl1_common.c
+++ b/plat/common/plat_bl1_common.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -7,8 +7,10 @@
 #include <arch_helpers.h>
 #include <assert.h>
 #include <bl_common.h>
+#include <bl1.h>
 #include <debug.h>
 #include <errno.h>
+#include <platform.h>
 #include <platform_def.h>
 
 /*
@@ -21,6 +23,8 @@
 #pragma weak bl1_plat_set_ep_info
 #pragma weak bl1_plat_get_image_desc
 #pragma weak bl1_plat_fwu_done
+#pragma weak bl1_plat_handle_pre_image_load
+#pragma weak bl1_plat_handle_post_image_load
 
 
 unsigned int bl1_plat_get_next_image_id(void)
@@ -35,6 +39,11 @@
 
 }
 
+int bl1_plat_handle_pre_image_load(unsigned int image_id)
+{
+	return 0;
+}
+
 /*
  * Following is the default definition that always
  * returns BL2 image details.
@@ -62,3 +71,54 @@
 	assert(0);
 	return -ENOMEM;
 }
+
+/*
+ * Default implementation for bl1_plat_handle_post_image_load(). This function
+ * populates the default arguments to BL2. The BL2 memory layout structure
+ * is allocated and the calculated layout is populated in arg1 to BL2.
+ */
+int bl1_plat_handle_post_image_load(unsigned int image_id)
+{
+	meminfo_t *bl2_tzram_layout;
+	meminfo_t *bl1_tzram_layout;
+	image_desc_t *image_desc;
+	entry_point_info_t *ep_info;
+
+	if (image_id != BL2_IMAGE_ID)
+		return 0;
+
+	/* Get the image descriptor */
+	image_desc = bl1_plat_get_image_desc(BL2_IMAGE_ID);
+	assert(image_desc != NULL);
+
+	/* Get the entry point info */
+	ep_info = &image_desc->ep_info;
+
+	/* Find out how much free trusted ram remains after BL1 load */
+	bl1_tzram_layout = bl1_plat_sec_mem_layout();
+
+	/*
+	 * Create a new layout of memory for BL2 as seen by BL1 i.e.
+	 * tell it the amount of total and free memory available.
+	 * This layout is created at the first free address visible
+	 * to BL2. BL2 will read the memory layout before using its
+	 * memory for other purposes.
+	 */
+#if LOAD_IMAGE_V2
+	bl2_tzram_layout = (meminfo_t *) bl1_tzram_layout->total_base;
+#else
+	bl2_tzram_layout = (meminfo_t *) bl1_tzram_layout->free_base;
+#endif /* LOAD_IMAGE_V2 */
+
+#if !ERROR_DEPRECATED
+	bl1_init_bl2_mem_layout(bl1_tzram_layout, bl2_tzram_layout);
+#else
+	bl1_calc_bl2_mem_layout(bl1_tzram_layout, bl2_tzram_layout);
+#endif
+
+	ep_info->args.arg1 = (uintptr_t)bl2_tzram_layout;
+
+	VERBOSE("BL1: BL2 memory layout address = %p\n",
+		(void *) bl2_tzram_layout);
+	return 0;
+}
diff --git a/plat/common/plat_bl2_el3_common.c b/plat/common/plat_bl2_el3_common.c
deleted file mode 100644
index 358a02d..0000000
--- a/plat/common/plat_bl2_el3_common.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <arch_helpers.h>
-#include <assert.h>
-#include <bl_common.h>
-#include <debug.h>
-#include <errno.h>
-#include <platform_def.h>
-
-/*
- * The following platform functions are weakly defined. They
- * are default implementations that allow BL2 to compile in
- * absence of real definitions. The Platforms may override
- * with more complex definitions.
- */
-#pragma weak bl2_el3_plat_prepare_exit
-
-void bl2_el3_plat_prepare_exit(void)
-{
-}
diff --git a/plat/common/plat_bl_common.c b/plat/common/plat_bl_common.c
new file mode 100644
index 0000000..502bb54
--- /dev/null
+++ b/plat/common/plat_bl_common.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <debug.h>
+#include <errno.h>
+#include <platform.h>
+
+/*
+ * The following platform functions are weakly defined. The Platforms
+ * may redefine with strong definition.
+ */
+#pragma weak bl2_el3_plat_prepare_exit
+#pragma weak plat_error_handler
+#pragma weak bl2_plat_preload_setup
+#pragma weak bl2_plat_handle_pre_image_load
+#pragma weak bl2_plat_handle_post_image_load
+#pragma weak plat_try_next_boot_source
+
+void bl2_el3_plat_prepare_exit(void)
+{
+}
+
+void __dead2 plat_error_handler(int err)
+{
+	while (1)
+		wfi();
+}
+
+void bl2_plat_preload_setup(void)
+{
+}
+
+int bl2_plat_handle_pre_image_load(unsigned int image_id)
+{
+	return 0;
+}
+
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	return 0;
+}
+
+int plat_try_next_boot_source(void)
+{
+	return 0;
+}
+
+#if !ERROR_DEPRECATED
+#pragma weak bl2_early_platform_setup2
+
+/*
+ * The following platform API implementation that allow compatibility for
+ * the older platform APIs.
+ */
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+			u_register_t arg2, u_register_t arg3)
+{
+	bl2_early_platform_setup((void *)arg1);
+}
+#endif
diff --git a/plat/common/platform_helpers_default.c b/plat/common/platform_helpers_default.c
deleted file mode 100644
index ce1a731..0000000
--- a/plat/common/platform_helpers_default.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <arch_helpers.h>
-#include <platform.h>
-
-/*
- * Placeholder functions which can be redefined by each platfrom.
- */
-
-#pragma weak plat_error_handler
-#pragma weak bl1_plat_handle_pre_image_load
-#pragma weak bl1_plat_handle_post_image_load
-#pragma weak bl2_plat_preload_setup
-#pragma weak bl2_plat_handle_pre_image_load
-#pragma weak bl2_plat_handle_post_image_load
-#pragma weak plat_try_next_boot_source
-
-void __dead2 plat_error_handler(int err)
-{
-	while (1)
-		wfi();
-}
-
-int bl1_plat_handle_pre_image_load(void)
-{
-	return 0;
-}
-
-int bl1_plat_handle_post_image_load(void)
-{
-	return 0;
-}
-
-void bl2_plat_preload_setup(void)
-{
-}
-
-int bl2_plat_handle_pre_image_load(unsigned int image_id)
-{
-	return 0;
-}
-
-int bl2_plat_handle_post_image_load(unsigned int image_id)
-{
-	return 0;
-}
-
-int plat_try_next_boot_source(void)
-{
-	return 0;
-}
diff --git a/tools/cert_create/include/tbbr/tbb_ext.h b/tools/cert_create/include/tbbr/tbb_ext.h
index 85ad359..5b427d3 100644
--- a/tools/cert_create/include/tbbr/tbb_ext.h
+++ b/tools/cert_create/include/tbbr/tbb_ext.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -13,6 +13,8 @@
 	TRUSTED_FW_NVCOUNTER_EXT,
 	NON_TRUSTED_FW_NVCOUNTER_EXT,
 	TRUSTED_BOOT_FW_HASH_EXT,
+	TRUSTED_BOOT_FW_CONFIG_HASH_EXT,
+	HW_CONFIG_HASH_EXT,
 	TRUSTED_WORLD_PK_EXT,
 	NON_TRUSTED_WORLD_PK_EXT,
 	SCP_FW_CONTENT_CERT_PK_EXT,
diff --git a/tools/cert_create/src/tbbr/tbb_cert.c b/tools/cert_create/src/tbbr/tbb_cert.c
index c815178..325b462 100644
--- a/tools/cert_create/src/tbbr/tbb_cert.c
+++ b/tools/cert_create/src/tbbr/tbb_cert.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -26,9 +26,11 @@
 		.issuer = TRUSTED_BOOT_FW_CERT,
 		.ext = {
 			TRUSTED_FW_NVCOUNTER_EXT,
-			TRUSTED_BOOT_FW_HASH_EXT
+			TRUSTED_BOOT_FW_HASH_EXT,
+			TRUSTED_BOOT_FW_CONFIG_HASH_EXT,
+			HW_CONFIG_HASH_EXT
 		},
-		.num_ext = 2
+		.num_ext = 4
 	},
 	[TRUSTED_KEY_CERT] = {
 		.id = TRUSTED_KEY_CERT,
diff --git a/tools/cert_create/src/tbbr/tbb_ext.c b/tools/cert_create/src/tbbr/tbb_ext.c
index 504b0fc..5f2cec1 100644
--- a/tools/cert_create/src/tbbr/tbb_ext.c
+++ b/tools/cert_create/src/tbbr/tbb_ext.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -53,6 +53,26 @@
 		.asn1_type = V_ASN1_OCTET_STRING,
 		.type = EXT_TYPE_HASH
 	},
+	[TRUSTED_BOOT_FW_CONFIG_HASH_EXT] = {
+		.oid = TRUSTED_BOOT_FW_CONFIG_HASH_OID,
+		.opt = "tb-fw-config",
+		.help_msg = "Trusted Boot Firmware Config file",
+		.sn = "TrustedBootFirmwareConfigHash",
+		.ln = "Trusted Boot Firmware Config hash",
+		.asn1_type = V_ASN1_OCTET_STRING,
+		.type = EXT_TYPE_HASH,
+		.optional = 1
+	},
+	[HW_CONFIG_HASH_EXT] = {
+		.oid = HW_CONFIG_HASH_OID,
+		.opt = "hw-config",
+		.help_msg = "HW Config file",
+		.sn = "HWConfigHash",
+		.ln = "HW Config hash",
+		.asn1_type = V_ASN1_OCTET_STRING,
+		.type = EXT_TYPE_HASH,
+		.optional = 1
+	},
 	[TRUSTED_WORLD_PK_EXT] = {
 		.oid = TRUSTED_WORLD_PK_OID,
 		.sn = "TrustedWorldPublicKey",
diff --git a/tools/fiptool/tbbr_config.c b/tools/fiptool/tbbr_config.c
index 827cab2..2c0adcd 100644
--- a/tools/fiptool/tbbr_config.c
+++ b/tools/fiptool/tbbr_config.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -67,7 +67,17 @@
 		.uuid = UUID_NON_TRUSTED_FIRMWARE_BL33,
 		.cmdline_name = "nt-fw"
 	},
-
+	/* Dynamic Configs */
+	{
+		.name = "HW_CONFIG",
+		.uuid = UUID_HW_CONFIG,
+		.cmdline_name = "hw-config"
+	},
+	{
+		.name = "TB_FW_CONFIG",
+		.uuid = UUID_TB_FW_CONFIG,
+		.cmdline_name = "tb-fw-config"
+	},
 	/* Key Certificates */
 	{
 		.name = "Root Of Trust key certificate",