feat(plat/allwinner): add R329 support
Allwinner R329 is a new dual-core Corte-A53 SoC. Add basical TF-A
support for it, to provide a PSCI implementation containing CPU
boot/shutdown and SoC reset.
Change-Id: I0fa37ee9b4a8e0e1137bf7cf7d614b6ca9624bfe
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
diff --git a/plat/allwinner/sun50i_r329/include/sunxi_ccu.h b/plat/allwinner/sun50i_r329/include/sunxi_ccu.h
new file mode 100644
index 0000000..0e6b543
--- /dev/null
+++ b/plat/allwinner/sun50i_r329/include/sunxi_ccu.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2021 Sipeed
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SUNXI_CCU_H
+#define SUNXI_CCU_H
+
+#define SUNXI_CCU_SEC_SWITCH_REG (SUNXI_CCU_BASE + 0x0f00)
+
+#define SUNXI_R_PRCM_SEC_SWITCH_REG (SUNXI_R_PRCM_BASE + 0x0290)
+
+#endif /* SUNXI_CCU_H */
diff --git a/plat/allwinner/sun50i_r329/include/sunxi_cpucfg.h b/plat/allwinner/sun50i_r329/include/sunxi_cpucfg.h
new file mode 100644
index 0000000..9478f32
--- /dev/null
+++ b/plat/allwinner/sun50i_r329/include/sunxi_cpucfg.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2021 Sipeed
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SUNXI_CPUCFG_H
+#define SUNXI_CPUCFG_H
+
+#include <sunxi_mmap.h>
+
+/* c = cluster, n = core */
+#define SUNXI_CPUCFG_CLS_CTRL_REG0(c) (SUNXI_C0_CPUXCFG_BASE + 0x0010)
+#define SUNXI_CPUCFG_CLS_CTRL_REG1(c) (SUNXI_C0_CPUXCFG_BASE + 0x0014)
+#define SUNXI_CPUCFG_CACHE_CFG_REG (SUNXI_C0_CPUXCFG_BASE + 0x0024)
+#define SUNXI_CPUCFG_DBG_REG0 (SUNXI_C0_CPUXCFG_BASE + 0x00c0)
+
+#define SUNXI_CPUCFG_RST_CTRL_REG(c) (SUNXI_C0_CPUXCFG_BASE + 0x0000)
+#define SUNXI_CPUCFG_GEN_CTRL_REG0(c) (SUNXI_CPUCFG_BASE + 0x0000)
+#define SUNXI_CPUCFG_RVBAR_LO_REG(n) (SUNXI_CPUCFG_BASE + 0x0040 + (n) * 8)
+#define SUNXI_CPUCFG_RVBAR_HI_REG(n) (SUNXI_CPUCFG_BASE + 0x0044 + (n) * 8)
+
+#define SUNXI_POWERON_RST_REG(c) (SUNXI_R_CPUCFG_BASE + 0x0040 + (c) * 4)
+#define SUNXI_POWEROFF_GATING_REG(c) (SUNXI_R_CPUCFG_BASE + 0x0044 + (c) * 4)
+#define SUNXI_CPU_POWER_CLAMP_REG(c, n) (SUNXI_R_CPUCFG_BASE + 0x0050 + \
+ (c) * 0x10 + (n) * 4)
+
+#define SUNXI_AA64nAA32_REG SUNXI_CPUCFG_GEN_CTRL_REG0
+#define SUNXI_AA64nAA32_OFFSET 4
+
+#endif /* SUNXI_CPUCFG_H */
diff --git a/plat/allwinner/sun50i_r329/include/sunxi_mmap.h b/plat/allwinner/sun50i_r329/include/sunxi_mmap.h
new file mode 100644
index 0000000..a4469b5
--- /dev/null
+++ b/plat/allwinner/sun50i_r329/include/sunxi_mmap.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SUNXI_MMAP_H
+#define SUNXI_MMAP_H
+
+/* Memory regions */
+#define SUNXI_ROM_BASE 0x00000000
+#define SUNXI_ROM_SIZE 0x00010000
+/*
+ * In fact all SRAM from 0x100000 is SRAM A2. However as it's too big for
+ * firmware, and the user manual gives a tip on a 2*64K/27*64K partition,
+ * only use the first 2*64K for firmwares now, with the SPL using the first
+ * 64K and BL3-1 using the second one.
+ *
+ * Only the used 2*64K SRAM is defined here, to prevent a gaint translation
+ * table to be generated.
+ */
+#define SUNXI_SRAM_BASE 0x00100000
+#define SUNXI_SRAM_SIZE 0x00020000
+#define SUNXI_SRAM_A1_BASE 0x00100000
+#define SUNXI_SRAM_A1_SIZE 0x00010000
+#define SUNXI_SRAM_A2_BASE 0x00110000
+#define SUNXI_SRAM_A2_BL31_OFFSET 0x00000000
+#define SUNXI_SRAM_A2_SIZE 0x00010000
+#define SUNXI_DEV_BASE 0x01000000
+#define SUNXI_DEV_SIZE 0x09000000
+#define SUNXI_DRAM_BASE 0x40000000
+#define SUNXI_DRAM_VIRT_BASE 0x0a000000
+
+/* Memory-mapped devices */
+#define SUNXI_WDOG_BASE 0x020000a0
+#define SUNXI_R_WDOG_BASE SUNXI_WDOG_BASE
+#define SUNXI_PIO_BASE 0x02000400
+#define SUNXI_SPC_BASE 0x02000800
+#define SUNXI_CCU_BASE 0x02001000
+#define SUNXI_UART0_BASE 0x02500000
+#define SUNXI_SYSCON_BASE 0x03000000
+#define SUNXI_DMA_BASE 0x03002000
+#define SUNXI_SID_BASE 0x03006000
+#define SUNXI_GICD_BASE 0x03021000
+#define SUNXI_GICC_BASE 0x03022000
+#define SUNXI_SPI0_BASE 0x04025000
+#define SUNXI_R_CPUCFG_BASE 0x07000400
+#define SUNXI_R_PRCM_BASE 0x07010000
+#define SUNXI_R_PIO_BASE 0x07022000
+#define SUNXI_R_UART_BASE 0x07080000
+#define SUNXI_R_I2C_BASE 0x07081400
+#define SUNXI_CPUCFG_BASE 0x08100000
+#define SUNXI_C0_CPUXCFG_BASE 0x09010000
+
+#endif /* SUNXI_MMAP_H */
diff --git a/plat/allwinner/sun50i_r329/include/sunxi_spc.h b/plat/allwinner/sun50i_r329/include/sunxi_spc.h
new file mode 100644
index 0000000..2c87bca
--- /dev/null
+++ b/plat/allwinner/sun50i_r329/include/sunxi_spc.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2021 Sipeed
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SUNXI_SPC_H
+#define SUNXI_SPC_H
+
+/* Get by REing stock ATF and checking initialization loop boundary */
+#define SUNXI_SPC_NUM_PORTS 11
+
+#define SUNXI_SPC_DECPORT_STA_REG(p) (SUNXI_SPC_BASE + 0x0000 + 0x10 * (p))
+#define SUNXI_SPC_DECPORT_SET_REG(p) (SUNXI_SPC_BASE + 0x0004 + 0x10 * (p))
+#define SUNXI_SPC_DECPORT_CLR_REG(p) (SUNXI_SPC_BASE + 0x0008 + 0x10 * (p))
+
+#endif /* SUNXI_SPC_H */