Merge changes I75a4554a,Idce603e4 into integration
* changes:
feat(plat/marvell): introduce t9130_cex7_eval
feat(plat/marvell/a8k): allow overriding default paths
diff --git a/docs/plat/marvell/armada/build.rst b/docs/plat/marvell/armada/build.rst
index ca84be6..a602ada 100644
--- a/docs/plat/marvell/armada/build.rst
+++ b/docs/plat/marvell/armada/build.rst
@@ -62,6 +62,7 @@
- a80x0_mcbin - MacchiatoBin
- a80x0_puzzle - IEI Puzzle-M801
- t9130 - CN913x
+ - t9130_cex7_eval - CN913x CEx7 Evaluation Board
- DEBUG
diff --git a/plat/marvell/armada/a8k/common/a8k_common.mk b/plat/marvell/armada/a8k/common/a8k_common.mk
index 773b912..30e6280 100644
--- a/plat/marvell/armada/a8k/common/a8k_common.mk
+++ b/plat/marvell/armada/a8k/common/a8k_common.mk
@@ -80,7 +80,7 @@
drivers/arm/gic/v2/gicv2_helpers.c \
plat/common/plat_gicv2.c
-PLAT_INCLUDES := -I$(BOARD_DIR) \
+PLAT_INCLUDES += -I$(BOARD_DIR) \
-I$(BOARD_DIR)/board \
-I$(CURDIR)/drivers/marvell \
-I$(PLAT_COMMON_BASE)/include \
@@ -89,8 +89,10 @@
PLAT_BL_COMMON_SOURCES := $(PLAT_COMMON_BASE)/aarch64/a8k_common.c \
drivers/ti/uart/aarch64/16550_console.S
+ifndef BLE_PORTING_SOURCES
BLE_PORTING_SOURCES := $(BOARD_DIR)/board/dram_port.c \
$(BOARD_DIR)/board/marvell_plat_config.c
+endif
MARVELL_MOCHI_DRV += $(MARVELL_DRV_BASE)/mochi/cp110_setup.c
@@ -125,7 +127,9 @@
MARVELL_DRV += $(MARVELL_DRV_BASE)/mg_conf_cm3/mg_conf_cm3.c
endif
+ifndef BL31_PORTING_SOURCES
BL31_PORTING_SOURCES := $(BOARD_DIR)/board/marvell_plat_config.c
+endif
ifeq ($(SYSTEM_POWER_SUPPORT),1)
BL31_PORTING_SOURCES += $(BOARD_DIR)/board/system_power.c
diff --git a/plat/marvell/octeontx/otx2/t91/t9130_cex7_eval/board/marvell_plat_config.c b/plat/marvell/octeontx/otx2/t91/t9130_cex7_eval/board/marvell_plat_config.c
new file mode 100644
index 0000000..5bae8eb
--- /dev/null
+++ b/plat/marvell/octeontx/otx2/t91/t9130_cex7_eval/board/marvell_plat_config.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ * Copyright (C) 2021 Semihalf.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <armada_common.h>
+#include <mvebu_def.h>
+
+/*
+ * If bootrom is currently at BLE there's no need to include the memory
+ * maps structure at this point
+ */
+#ifndef IMAGE_BLE
+
+/*****************************************************************************
+ * AMB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win amb_memory_map_cp0[] = {
+ /* CP0 SPI1 CS0 Direct Mode access */
+ {0xef00, 0x1000000, AMB_SPI1_CS0_ID},
+};
+
+struct addr_map_win amb_memory_map_cp1[] = {
+ /* CP1 SPI1 CS0 Direct Mode access */
+ {0xe800, 0x1000000, AMB_SPI1_CS0_ID},
+};
+
+int marvell_get_amb_memory_map(struct addr_map_win **win, uint32_t *size,
+ uintptr_t base)
+{
+ switch (base) {
+ case MVEBU_CP_REGS_BASE(0):
+ *win = amb_memory_map_cp0;
+ *size = ARRAY_SIZE(amb_memory_map_cp0);
+ return 0;
+ case MVEBU_CP_REGS_BASE(1):
+ *win = amb_memory_map_cp1;
+ *size = ARRAY_SIZE(amb_memory_map_cp1);
+ return 0;
+ case MVEBU_CP_REGS_BASE(2):
+ default:
+ *size = 0;
+ *win = 0;
+ return 1;
+ }
+}
+#endif
+
+/*****************************************************************************
+ * IO WIN Configuration
+ *****************************************************************************
+ */
+struct addr_map_win io_win_memory_map[] = {
+#if (CP_COUNT > 1)
+ /* SB (MCi0) internal regs */
+ {0x00000000f4000000, 0x2000000, MCI_0_TID},
+ /* SB (MCi0) PCIe0-2 on CP1 */
+ {0x00000000e2000000, 0x7000000, MCI_0_TID},
+ /*
+ * Due to lack of sufficient number of IO windows registers,
+ * below CP1 PCIE configuration must be performed in the
+ * later firmware stages. It should replace the MCI 0 indirect
+ * window, which becomes no longer needed.
+ */
+ /* {0x0000000890000000, 0x30000000, MCI_0_TID}, */
+#if (CP_COUNT > 2)
+ /* SB (MCi1) internal regs */
+ {0x00000000f6000000, 0x2000000, MCI_1_TID},
+ /* SB (MCi1) PCIe0-2 on CP2 */
+ {0x00000000e9000000, 0x6000000, MCI_1_TID},
+ /*
+ * Due to lack of sufficient number of IO windows registers,
+ * below CP2 PCIE configuration must be performed in the
+ * later firmware stages. It should replace the MCI 1 indirect
+ * window, which becomes no longer needed.
+ */
+ /* {0x00000008c0000000, 0x30000000, MCI_1_TID}, */
+#endif
+#endif
+#ifndef IMAGE_BLE
+ /* MCI 0 indirect window */
+ {MVEBU_MCI_REG_BASE_REMAP(0), 0x100000, MCI_0_TID},
+ /* MCI 1 indirect window */
+ {MVEBU_MCI_REG_BASE_REMAP(1), 0x100000, MCI_1_TID},
+#endif
+};
+
+/* Global Control Register - window default target */
+uint32_t marvell_get_io_win_gcr_target(int ap_index)
+{
+ /*
+ * PIDI == iMCIP AP to SB internal MoChi connection.
+ * In other words CP0
+ */
+ return PIDI_TID;
+}
+
+int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win,
+ uint32_t *size)
+{
+ *win = io_win_memory_map;
+ if (*win == NULL)
+ *size = 0;
+ else
+ *size = ARRAY_SIZE(io_win_memory_map);
+
+ return 0;
+}
+
+#ifndef IMAGE_BLE
+/*****************************************************************************
+ * IOB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win iob_memory_map_cp0[] = {
+ /* SPI1_CS0 (RUNIT) window */
+ {0x00000000ef000000, 0x1000000, RUNIT_TID},
+ /* PEX2_X1 window */
+ {0x00000000e1000000, 0x1000000, PEX2_TID},
+ /* PEX1_X1 window */
+ {0x00000000e0000000, 0x1000000, PEX1_TID},
+ /* PEX0_X4 window */
+ {0x00000000c0000000, 0x20000000, PEX0_TID},
+ {0x0000000800000000, 0x90000000, PEX0_TID},
+};
+
+struct addr_map_win iob_memory_map_cp1[] = {
+ /* SPI1_CS0 (RUNIT) window */
+ {0x00000000e8000000, 0x1000000, RUNIT_TID},
+ /* PEX2_X1 window */
+ {0x00000000e6000000, 0x2000000, PEX2_TID},
+ {0x00000008b0000000, 0x10000000, PEX2_TID},
+ /* PEX1_X1 window */
+ {0x00000000e4000000, 0x2000000, PEX1_TID},
+ {0x00000008a0000000, 0x10000000, PEX1_TID},
+ /* PEX0_X2 window */
+ {0x00000000e2000000, 0x2000000, PEX0_TID},
+ {0x0000000890000000, 0x10000000, PEX0_TID},
+};
+
+struct addr_map_win iob_memory_map_cp2[] = {
+
+ /* PEX2_X1 window */
+ {0x00000000ed000000, 0x2000000, PEX2_TID},
+ {0x00000008e0000000, 0x10000000, PEX2_TID},
+ /* PEX1_X1 window */
+ {0x00000000eb000000, 0x2000000, PEX1_TID},
+ {0x00000008d0000000, 0x10000000, PEX1_TID},
+ /* PEX0_X1 window */
+ {0x00000000e9000000, 0x2000000, PEX0_TID},
+ {0x00000008c0000000, 0x10000000, PEX0_TID},
+};
+
+int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size,
+ uintptr_t base)
+{
+ switch (base) {
+ case MVEBU_CP_REGS_BASE(0):
+ *win = iob_memory_map_cp0;
+ *size = ARRAY_SIZE(iob_memory_map_cp0);
+ return 0;
+ case MVEBU_CP_REGS_BASE(1):
+ *win = iob_memory_map_cp1;
+ *size = ARRAY_SIZE(iob_memory_map_cp1);
+ return 0;
+ case MVEBU_CP_REGS_BASE(2):
+ *win = iob_memory_map_cp2;
+ *size = ARRAY_SIZE(iob_memory_map_cp2);
+ return 0;
+ default:
+ *size = 0;
+ *win = 0;
+ return 1;
+ }
+}
+#endif
+
+/*****************************************************************************
+ * CCU Configuration
+ *****************************************************************************
+ */
+struct addr_map_win ccu_memory_map[] = { /* IO window */
+#ifdef IMAGE_BLE
+ {0x00000000f2000000, 0x6000000, IO_0_TID}, /* IO window */
+#else
+#if LLC_SRAM
+ {PLAT_MARVELL_LLC_SRAM_BASE, PLAT_MARVELL_LLC_SRAM_SIZE, DRAM_0_TID},
+#endif
+ {0x00000000f2000000, 0xe000000, IO_0_TID}, /* IO window */
+ {0x00000000c0000000, 0x30000000, IO_0_TID}, /* IO window */
+ {0x0000000800000000, 0x100000000, IO_0_TID}, /* IO window */
+ {0x0000002000000000, 0x70e000000, IO_0_TID}, /* IO for CV-OS */
+#endif
+};
+
+uint32_t marvell_get_ccu_gcr_target(int ap)
+{
+ return DRAM_0_TID;
+}
+
+int marvell_get_ccu_memory_map(int ap_index, struct addr_map_win **win,
+ uint32_t *size)
+{
+ *win = ccu_memory_map;
+ *size = ARRAY_SIZE(ccu_memory_map);
+
+ return 0;
+}
+
+#ifdef IMAGE_BLE
+/*****************************************************************************
+ * SKIP IMAGE Configuration
+ *****************************************************************************
+ */
+void *plat_get_skip_image_data(void)
+{
+ /* No recovery button on CN-9130 board? */
+ return NULL;
+}
+#endif
diff --git a/plat/marvell/octeontx/otx2/t91/t9130_cex7_eval/platform.mk b/plat/marvell/octeontx/otx2/t91/t9130_cex7_eval/platform.mk
new file mode 100644
index 0000000..ee55455
--- /dev/null
+++ b/plat/marvell/octeontx/otx2/t91/t9130_cex7_eval/platform.mk
@@ -0,0 +1,33 @@
+#
+# Copyright (C) 2018 Marvell International Ltd.
+# Copyright (C) 2021 Semihalf.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+# https://spdx.org/licenses
+#
+
+PCI_EP_SUPPORT := 0
+
+CP_NUM := 1
+$(eval $(call add_define,CP_NUM))
+
+DOIMAGE_SEC := tools/doimage/secure/sec_img_7K.cfg
+
+MARVELL_MOCHI_DRV := drivers/marvell/mochi/ap807_setup.c
+
+BOARD_DIR := $(shell dirname $(lastword $(MAKEFILE_LIST)))
+
+#
+# CN913X CEx7 Evaluation Board shares the DRAM connectivity
+# and SerDes settings with the CN913X DB - reuse relevant
+# board-specific files.
+#
+T9130_DIR := $(BOARD_DIR)/../t9130
+PLAT_INCLUDES := -I$(T9130_DIR) \
+ -I$(T9130_DIR)/board
+BLE_PORTING_SOURCES := $(T9130_DIR)/board/dram_port.c \
+ $(BOARD_DIR)/board/marvell_plat_config.c
+
+include plat/marvell/armada/a8k/common/a8k_common.mk
+
+include plat/marvell/armada/common/marvell_common.mk