refactor(xilinx): move pm_defs.h to common place
Moved pm_defs.h file to common place so that it can be used for
Versal NET and ZynqMP. Also moved common code from zynqmp_pm_defs.h to
common place.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Change-Id: I2ee1e72258c6052cdd6467cdbcf4009afb98da49
diff --git a/plat/xilinx/versal/pm_service/pm_defs.h b/plat/xilinx/common/include/pm_defs.h
similarity index 62%
rename from plat/xilinx/versal/pm_service/pm_defs.h
rename to plat/xilinx/common/include/pm_defs.h
index dbc801c..eae1f84 100644
--- a/plat/xilinx/versal/pm_service/pm_defs.h
+++ b/plat/xilinx/common/include/pm_defs.h
@@ -42,23 +42,6 @@
#define PM_API_BASE_VERSION 1U
#define PM_API_VERSION_2 2U
-/* PM API ids */
-#define PM_REGISTER_NOTIFIER 5U
-#define PM_REQ_SUSPEND 6U
-#define PM_SELF_SUSPEND 7U
-#define PM_FORCE_POWERDOWN 8U
-#define PM_ABORT_SUSPEND 9U
-#define PM_REQ_WAKEUP 10U
-#define PM_SET_WAKEUP_SOURCE 11U
-#define PM_SYSTEM_SHUTDOWN 12U
-#define PM_IOCTL 34U
-#define PM_QUERY_DATA 35U
-#define PM_PLL_SET_PARAMETER 48U
-#define PM_PLL_GET_PARAMETER 49U
-#define PM_PLL_SET_MODE 50U
-#define PM_PLL_GET_MODE 51U
-#define PM_FEATURE_CHECK 63U
-
/* Loader API ids */
#define PM_LOAD_PDI 0x701U
#define PM_LOAD_GET_HANDOFF_PARAMS 0x70BU
@@ -70,10 +53,6 @@
#define IOCTL_GET_PLL_FRAC_DATA 11U
#define IOCTL_SET_SGI 25U
-/* Parameter ID for PLL IOCTLs */
-/* Fractional data portion for PLL */
-#define PM_PLL_PARAM_DATA 2
-
/* System shutdown macros */
#define XPM_SHUTDOWN_TYPE_SHUTDOWN 0U
#define XPM_SHUTDOWN_TYPE_RESET 1U
@@ -87,6 +66,101 @@
* Enum definitions
********************************************************************/
+/**
+ * @PM_PLL_PARAM_DIV2: Enable for divide by 2 function inside the PLL
+ * @PM_PLL_PARAM_FBDIV: Feedback divisor integer portion for the PLL
+ * @PM_PLL_PARAM_DATA: Feedback divisor fractional portion for the PLL
+ * @PM_PLL_PARAM_PRE_SRC: Clock source for PLL input
+ * @PM_PLL_PARAM_POST_SRC: Clock source for PLL Bypass mode
+ * @PM_PLL_PARAM_LOCK_DLY: Lock circuit config settings for lock windowsize
+ * @PM_PLL_PARAM_LOCK_CNT: Lock circuit counter setting
+ * @PM_PLL_PARAM_LFHF: PLL loop filter high frequency capacitor control
+ * @PM_PLL_PARAM_CP: PLL charge pump control
+ * @PM_PLL_PARAM_RES: PLL loop filter resistor control
+ */
+enum pm_pll_param {
+ PM_PLL_PARAM_DIV2,
+ PM_PLL_PARAM_FBDIV,
+ PM_PLL_PARAM_DATA,
+ PM_PLL_PARAM_PRE_SRC,
+ PM_PLL_PARAM_POST_SRC,
+ PM_PLL_PARAM_LOCK_DLY,
+ PM_PLL_PARAM_LOCK_CNT,
+ PM_PLL_PARAM_LFHF,
+ PM_PLL_PARAM_CP,
+ PM_PLL_PARAM_RES,
+ PM_PLL_PARAM_MAX,
+};
+
+enum pm_api_id {
+ /* Miscellaneous API functions: */
+ PM_GET_API_VERSION = 1, /* Do not change or move */
+ PM_SET_CONFIGURATION,
+ PM_GET_NODE_STATUS,
+ PM_GET_OP_CHARACTERISTIC,
+ PM_REGISTER_NOTIFIER,
+ /* API for suspending of PUs: */
+ PM_REQ_SUSPEND,
+ PM_SELF_SUSPEND,
+ PM_FORCE_POWERDOWN,
+ PM_ABORT_SUSPEND,
+ PM_REQ_WAKEUP,
+ PM_SET_WAKEUP_SOURCE,
+ PM_SYSTEM_SHUTDOWN,
+ /* API for managing PM slaves: */
+ PM_REQ_NODE,
+ PM_RELEASE_NODE,
+ PM_SET_REQUIREMENT,
+ PM_SET_MAX_LATENCY,
+ /* Direct control API functions: */
+ PM_RESET_ASSERT,
+ PM_RESET_GET_STATUS,
+ PM_MMIO_WRITE,
+ PM_MMIO_READ,
+ PM_INIT_FINALIZE,
+ PM_FPGA_LOAD,
+ PM_FPGA_GET_STATUS,
+ PM_GET_CHIPID,
+ PM_SECURE_RSA_AES,
+ PM_SECURE_SHA,
+ PM_SECURE_RSA,
+ PM_PINCTRL_REQUEST,
+ PM_PINCTRL_RELEASE,
+ PM_PINCTRL_GET_FUNCTION,
+ PM_PINCTRL_SET_FUNCTION,
+ PM_PINCTRL_CONFIG_PARAM_GET,
+ PM_PINCTRL_CONFIG_PARAM_SET,
+ PM_IOCTL,
+ /* API to query information from firmware */
+ PM_QUERY_DATA,
+ /* Clock control API functions */
+ PM_CLOCK_ENABLE,
+ PM_CLOCK_DISABLE,
+ PM_CLOCK_GETSTATE,
+ PM_CLOCK_SETDIVIDER,
+ PM_CLOCK_GETDIVIDER,
+ PM_CLOCK_SETRATE,
+ PM_CLOCK_GETRATE,
+ PM_CLOCK_SETPARENT,
+ PM_CLOCK_GETPARENT,
+ PM_SECURE_IMAGE,
+ /* FPGA PL Readback */
+ PM_FPGA_READ,
+ PM_SECURE_AES,
+ /* PLL control API functions */
+ PM_PLL_SET_PARAMETER,
+ PM_PLL_GET_PARAMETER,
+ PM_PLL_SET_MODE,
+ PM_PLL_GET_MODE,
+ /* PM Register Access API */
+ PM_REGISTER_ACCESS,
+ PM_EFUSE_ACCESS,
+ PM_FPGA_GET_VERSION,
+ PM_FPGA_GET_FEATURE_LIST,
+ PM_FEATURE_CHECK = 63,
+ PM_API_MAX = 74
+};
+
enum pm_abort_reason {
ABORT_REASON_WKUP_EVENT = 100,
ABORT_REASON_PU_BUSY,
@@ -123,6 +197,7 @@
* @PM_RET_ERROR_NOTSUPPORTED: feature not supported (deprecated)
* @PM_RET_ERROR_NOFEATURE: feature is not available
* @PM_RET_ERROR_INVALID_CRC: invalid crc in IPI communication
+ * @PM_RET_ERROR_NOT_ENABLED: feature is not enabled
* @PM_RET_ERROR_INTERNAL: internal error
* @PM_RET_ERROR_CONFLICT: conflict
* @PM_RET_ERROR_ACCESS: access rights violation
@@ -138,6 +213,7 @@
PM_RET_ERROR_NOTSUPPORTED = 4,
PM_RET_ERROR_NOFEATURE = 19,
PM_RET_ERROR_INVALID_CRC = 301,
+ PM_RET_ERROR_NOT_ENABLED = 29,
PM_RET_ERROR_INTERNAL = 2000,
PM_RET_ERROR_CONFLICT = 2001,
PM_RET_ERROR_ACCESS = 2002,
@@ -145,7 +221,8 @@
PM_RET_ERROR_DOUBLE_REQ = 2004,
PM_RET_ERROR_ABORT_SUSPEND = 2005,
PM_RET_ERROR_TIMEOUT = 2006,
- PM_RET_ERROR_NODE_USED = 2007
+ PM_RET_ERROR_NODE_USED = 2007,
+ PM_RET_ERROR_NO_FEATURE = 2008
};
/**
diff --git a/plat/xilinx/versal_net/include/plat_private.h b/plat/xilinx/versal_net/include/plat_private.h
index 6a3bc19..fc4a6fd 100644
--- a/plat/xilinx/versal_net/include/plat_private.h
+++ b/plat/xilinx/versal_net/include/plat_private.h
@@ -1,7 +1,7 @@
/*
* Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2021-2022, Xilinx, Inc. All rights reserved.
- * Copyright (C) 2022, Advanced Micro Devices, Inc. All rights reserved.
+ * Copyright (c) 2022-2023, Advanced Micro Devices, Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -43,7 +43,6 @@
*/
int request_intr_type_el3(uint32_t irq, interrupt_type_handler_t fiq_handler);
-#define PM_GET_CHIPID (24U)
#define IOCTL_OSPI_MUX_SELECT (21U)
#endif /* PLAT_PRIVATE_H */
diff --git a/plat/xilinx/versal_net/plat_psci.c b/plat/xilinx/versal_net/plat_psci.c
index c5833a9..8bb9bda 100644
--- a/plat/xilinx/versal_net/plat_psci.c
+++ b/plat/xilinx/versal_net/plat_psci.c
@@ -1,7 +1,7 @@
/*
* Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2021-2022, Xilinx, Inc. All rights reserved.
- * Copyright (C) 2022, Advanced Micro Devices, Inc. All rights reserved.
+ * Copyright (c) 2022-2023, Advanced Micro Devices, Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -17,11 +17,10 @@
#include <plat_arm.h>
#include <plat_private.h>
+#include <pm_defs.h>
#define PM_RET_ERROR_NOFEATURE U(19)
-#define PM_IOCTL 34U
-
static uintptr_t versal_net_sec_entry;
static void zynqmp_cpu_standby(plat_local_state_t cpu_state)
diff --git a/plat/xilinx/zynqmp/include/plat_pm_common.h b/plat/xilinx/zynqmp/include/plat_pm_common.h
index a57aebe..8167eb9 100644
--- a/plat/xilinx/zynqmp/include/plat_pm_common.h
+++ b/plat/xilinx/zynqmp/include/plat_pm_common.h
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2022-2023, Advanced Micro Devices, Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -14,7 +15,7 @@
#include <stdint.h>
#include <common/debug.h>
-#include "pm_defs.h"
+#include "zynqmp_pm_defs.h"
#define ZYNQMP_TZ_VERSION_MAJOR 1
diff --git a/plat/xilinx/zynqmp/pm_service/pm_defs.h b/plat/xilinx/zynqmp/pm_service/pm_defs.h
deleted file mode 100644
index f00ab4b..0000000
--- a/plat/xilinx/zynqmp/pm_service/pm_defs.h
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * Copyright (c) 2013-2022, ARM Limited and Contributors. All rights reserved.
- * Copyright (c) 2022-2023, Advanced Micro Devices Inc. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-/* ZynqMP power management enums and defines */
-
-#ifndef PM_DEFS_H
-#define PM_DEFS_H
-
-/*********************************************************************
- * Macro definitions
- ********************************************************************/
-
-/*
- * Version number is a 32bit value, like:
- * (PM_VERSION_MAJOR << 16) | PM_VERSION_MINOR
- */
-#define PM_VERSION_MAJOR 1U
-#define PM_VERSION_MINOR 1U
-
-#define PM_VERSION ((PM_VERSION_MAJOR << 16U) | PM_VERSION_MINOR)
-
-/**
- * PM API versions
- */
-/* Expected version of firmware APIs */
-#define FW_API_BASE_VERSION (1U)
-/* Expected version of firmware API for feature check */
-#define FW_API_VERSION_2 (2U)
-/* Version of APIs implemented in ATF */
-#define ATF_API_BASE_VERSION (1U)
-/* Updating the QUERY_DATA API versioning as the bitmask functionality
- * support is added in the v2.*/
-#define TFA_API_QUERY_DATA_VERSION (2U)
-
-/* Capabilities for RAM */
-#define PM_CAP_ACCESS 0x1U
-#define PM_CAP_CONTEXT 0x2U
-
-#define MAX_LATENCY (~0U)
-#define MAX_QOS 100U
-
-/* State arguments of the self suspend */
-#define PM_STATE_CPU_IDLE 0x0U
-#define PM_STATE_SUSPEND_TO_RAM 0xFU
-
-/* APU processor states */
-#define PM_PROC_STATE_FORCEDOFF 0U
-#define PM_PROC_STATE_ACTIVE 1U
-#define PM_PROC_STATE_SLEEP 2U
-#define PM_PROC_STATE_SUSPENDING 3U
-
-#define PM_GET_CALLBACK_DATA 0xa01
-#define PM_SET_SUSPEND_MODE 0xa02
-#define PM_GET_TRUSTZONE_VERSION 0xa03
-
-/*********************************************************************
- * Enum definitions
- ********************************************************************/
-
-enum pm_api_id {
- /* Miscellaneous API functions: */
- PM_GET_API_VERSION = 1, /* Do not change or move */
- PM_SET_CONFIGURATION,
- PM_GET_NODE_STATUS,
- PM_GET_OP_CHARACTERISTIC,
- PM_REGISTER_NOTIFIER,
- /* API for suspending of PUs: */
- PM_REQ_SUSPEND,
- PM_SELF_SUSPEND,
- PM_FORCE_POWERDOWN,
- PM_ABORT_SUSPEND,
- PM_REQ_WAKEUP,
- PM_SET_WAKEUP_SOURCE,
- PM_SYSTEM_SHUTDOWN,
- /* API for managing PM slaves: */
- PM_REQ_NODE,
- PM_RELEASE_NODE,
- PM_SET_REQUIREMENT,
- PM_SET_MAX_LATENCY,
- /* Direct control API functions: */
- PM_RESET_ASSERT,
- PM_RESET_GET_STATUS,
- PM_MMIO_WRITE,
- PM_MMIO_READ,
- PM_INIT_FINALIZE,
- PM_FPGA_LOAD,
- PM_FPGA_GET_STATUS,
- PM_GET_CHIPID,
- PM_SECURE_RSA_AES,
- PM_SECURE_SHA,
- PM_SECURE_RSA,
- PM_PINCTRL_REQUEST,
- PM_PINCTRL_RELEASE,
- PM_PINCTRL_GET_FUNCTION,
- PM_PINCTRL_SET_FUNCTION,
- PM_PINCTRL_CONFIG_PARAM_GET,
- PM_PINCTRL_CONFIG_PARAM_SET,
- PM_IOCTL,
- /* API to query information from firmware */
- PM_QUERY_DATA,
- /* Clock control API functions */
- PM_CLOCK_ENABLE,
- PM_CLOCK_DISABLE,
- PM_CLOCK_GETSTATE,
- PM_CLOCK_SETDIVIDER,
- PM_CLOCK_GETDIVIDER,
- PM_CLOCK_SETRATE,
- PM_CLOCK_GETRATE,
- PM_CLOCK_SETPARENT,
- PM_CLOCK_GETPARENT,
- PM_SECURE_IMAGE,
- /* FPGA PL Readback */
- PM_FPGA_READ,
- PM_SECURE_AES,
- /* PLL control API functions */
- PM_PLL_SET_PARAMETER,
- PM_PLL_GET_PARAMETER,
- PM_PLL_SET_MODE,
- PM_PLL_GET_MODE,
- /* PM Register Access API */
- PM_REGISTER_ACCESS,
- PM_EFUSE_ACCESS,
- PM_FEATURE_CHECK = 63,
- PM_FPGA_GET_VERSION = 72,
- PM_FPGA_GET_FEATURE_LIST,
- PM_API_MAX
-};
-
-enum pm_node_id {
- NODE_UNKNOWN = 0,
- NODE_APU,
- NODE_APU_0,
- NODE_APU_1,
- NODE_APU_2,
- NODE_APU_3,
- NODE_RPU,
- NODE_RPU_0,
- NODE_RPU_1,
- NODE_PLD,
- NODE_FPD,
- NODE_OCM_BANK_0,
- NODE_OCM_BANK_1,
- NODE_OCM_BANK_2,
- NODE_OCM_BANK_3,
- NODE_TCM_0_A,
- NODE_TCM_0_B,
- NODE_TCM_1_A,
- NODE_TCM_1_B,
- NODE_L2,
- NODE_GPU_PP_0,
- NODE_GPU_PP_1,
- NODE_USB_0,
- NODE_USB_1,
- NODE_TTC_0,
- NODE_TTC_1,
- NODE_TTC_2,
- NODE_TTC_3,
- NODE_SATA,
- NODE_ETH_0,
- NODE_ETH_1,
- NODE_ETH_2,
- NODE_ETH_3,
- NODE_UART_0,
- NODE_UART_1,
- NODE_SPI_0,
- NODE_SPI_1,
- NODE_I2C_0,
- NODE_I2C_1,
- NODE_SD_0,
- NODE_SD_1,
- NODE_DP,
- NODE_GDMA,
- NODE_ADMA,
- NODE_NAND,
- NODE_QSPI,
- NODE_GPIO,
- NODE_CAN_0,
- NODE_CAN_1,
- NODE_EXTERN,
- NODE_APLL,
- NODE_VPLL,
- NODE_DPLL,
- NODE_RPLL,
- NODE_IOPLL,
- NODE_DDR,
- NODE_IPI_APU,
- NODE_IPI_RPU_0,
- NODE_GPU,
- NODE_PCIE,
- NODE_PCAP,
- NODE_RTC,
- NODE_LPD,
- NODE_VCU,
- NODE_IPI_RPU_1,
- NODE_IPI_PL_0,
- NODE_IPI_PL_1,
- NODE_IPI_PL_2,
- NODE_IPI_PL_3,
- NODE_PL,
- NODE_GEM_TSU,
- NODE_SWDT_0,
- NODE_SWDT_1,
- NODE_CSU,
- NODE_PJTAG,
- NODE_TRACE,
- NODE_TESTSCAN,
- NODE_PMU,
- NODE_MAX,
-};
-
-enum pm_request_ack {
- REQ_ACK_NO = 1,
- REQ_ACK_BLOCKING,
- REQ_ACK_NON_BLOCKING,
-};
-
-enum pm_abort_reason {
- ABORT_REASON_WKUP_EVENT = 100,
- ABORT_REASON_PU_BUSY,
- ABORT_REASON_NO_PWRDN,
- ABORT_REASON_UNKNOWN,
-};
-
-enum pm_suspend_reason {
- SUSPEND_REASON_PU_REQ = 201,
- SUSPEND_REASON_ALERT,
- SUSPEND_REASON_SYS_SHUTDOWN,
-};
-
-enum pm_ram_state {
- PM_RAM_STATE_OFF = 1,
- PM_RAM_STATE_RETENTION,
- PM_RAM_STATE_ON,
-};
-
-enum pm_opchar_type {
- PM_OPCHAR_TYPE_POWER = 1,
- PM_OPCHAR_TYPE_TEMP,
- PM_OPCHAR_TYPE_LATENCY,
-};
-
-/* TODO: move pm_ret_status from device specific location to common location */
-/**
- * @PM_RET_SUCCESS: success
- * @PM_RET_ERROR_ARGS: illegal arguments provided (deprecated)
- * @PM_RET_ERROR_NOTSUPPORTED: feature not supported (deprecated)
- * @PM_RET_ERROR_NOT_ENABLED: feature is not enabled
- * @PM_RET_ERROR_INVALID_CRC: invalid crc in IPI communication
- * @PM_RET_ERROR_INTERNAL: internal error
- * @PM_RET_ERROR_CONFLICT: conflict
- * @PM_RET_ERROR_ACCESS: access rights violation
- * @PM_RET_ERROR_INVALID_NODE: invalid node
- * @PM_RET_ERROR_DOUBLE_REQ: duplicate request for same node
- * @PM_RET_ERROR_ABORT_SUSPEND: suspend procedure has been aborted
- * @PM_RET_ERROR_TIMEOUT: timeout in communication with PMU
- * @PM_RET_ERROR_NODE_USED: node is already in use
- */
-enum pm_ret_status {
- PM_RET_SUCCESS = (0U),
- PM_RET_ERROR_ARGS = (1U),
- PM_RET_ERROR_NOTSUPPORTED = (4U),
- PM_RET_ERROR_NOT_ENABLED = (29U),
- PM_RET_ERROR_INVALID_CRC = (301U),
- PM_RET_ERROR_INTERNAL = (2000U),
- PM_RET_ERROR_CONFLICT = (2001U),
- PM_RET_ERROR_ACCESS = (2002U),
- PM_RET_ERROR_INVALID_NODE = (2003U),
- PM_RET_ERROR_DOUBLE_REQ = (2004U),
- PM_RET_ERROR_ABORT_SUSPEND = (2005U),
- PM_RET_ERROR_TIMEOUT = (2006U),
- PM_RET_ERROR_NODE_USED = (2007U),
- PM_RET_ERROR_NO_FEATURE = (2008U)
-};
-
-/**
- * @PM_INITIAL_BOOT: boot is a fresh system startup
- * @PM_RESUME: boot is a resume
- * @PM_BOOT_ERROR: error, boot cause cannot be identified
- */
-enum pm_boot_status {
- PM_INITIAL_BOOT,
- PM_RESUME,
- PM_BOOT_ERROR,
-};
-
-/**
- * @PMF_SHUTDOWN_TYPE_SHUTDOWN: shutdown
- * @PMF_SHUTDOWN_TYPE_RESET: reset/reboot
- * @PMF_SHUTDOWN_TYPE_SETSCOPE_ONLY: set the shutdown/reboot scope
- */
-enum pm_shutdown_type {
- PMF_SHUTDOWN_TYPE_SHUTDOWN,
- PMF_SHUTDOWN_TYPE_RESET,
- PMF_SHUTDOWN_TYPE_SETSCOPE_ONLY,
-};
-
-/**
- * @PMF_SHUTDOWN_SUBTYPE_SUBSYSTEM: shutdown/reboot APU subsystem only
- * @PMF_SHUTDOWN_SUBTYPE_PS_ONLY: shutdown/reboot entire PS (but not PL)
- * @PMF_SHUTDOWN_SUBTYPE_SYSTEM: shutdown/reboot entire system
- */
-enum pm_shutdown_subtype {
- PMF_SHUTDOWN_SUBTYPE_SUBSYSTEM,
- PMF_SHUTDOWN_SUBTYPE_PS_ONLY,
- PMF_SHUTDOWN_SUBTYPE_SYSTEM,
-};
-
-/**
- * @PM_PLL_PARAM_DIV2: Enable for divide by 2 function inside the PLL
- * @PM_PLL_PARAM_FBDIV: Feedback divisor integer portion for the PLL
- * @PM_PLL_PARAM_DATA: Feedback divisor fractional portion for the PLL
- * @PM_PLL_PARAM_PRE_SRC: Clock source for PLL input
- * @PM_PLL_PARAM_POST_SRC: Clock source for PLL Bypass mode
- * @PM_PLL_PARAM_LOCK_DLY: Lock circuit config settings for lock windowsize
- * @PM_PLL_PARAM_LOCK_CNT: Lock circuit counter setting
- * @PM_PLL_PARAM_LFHF: PLL loop filter high frequency capacitor control
- * @PM_PLL_PARAM_CP: PLL charge pump control
- * @PM_PLL_PARAM_RES: PLL loop filter resistor control
- */
-enum pm_pll_param {
- PM_PLL_PARAM_DIV2,
- PM_PLL_PARAM_FBDIV,
- PM_PLL_PARAM_DATA,
- PM_PLL_PARAM_PRE_SRC,
- PM_PLL_PARAM_POST_SRC,
- PM_PLL_PARAM_LOCK_DLY,
- PM_PLL_PARAM_LOCK_CNT,
- PM_PLL_PARAM_LFHF,
- PM_PLL_PARAM_CP,
- PM_PLL_PARAM_RES,
- PM_PLL_PARAM_MAX,
-};
-
-/**
- * @PM_PLL_MODE_RESET: PLL is in reset (not locked)
- * @PM_PLL_MODE_INTEGER: PLL is locked in integer mode
- * @PM_PLL_MODE_FRACTIONAL: PLL is locked in fractional mode
- */
-enum pm_pll_mode {
- PM_PLL_MODE_RESET,
- PM_PLL_MODE_INTEGER,
- PM_PLL_MODE_FRACTIONAL,
- PM_PLL_MODE_MAX,
-};
-
-/**
- * @PM_CLOCK_DIV0_ID: Clock divider 0
- * @PM_CLOCK_DIV1_ID: Clock divider 1
- */
-enum pm_clock_div_id {
- PM_CLOCK_DIV0_ID,
- PM_CLOCK_DIV1_ID,
-};
-
-#endif /* PM_DEFS_H */
diff --git a/plat/xilinx/zynqmp/pm_service/zynqmp_pm_api_sys.c b/plat/xilinx/zynqmp/pm_service/zynqmp_pm_api_sys.c
index d11d6ff..9133121 100644
--- a/plat/xilinx/zynqmp/pm_service/zynqmp_pm_api_sys.c
+++ b/plat/xilinx/zynqmp/pm_service/zynqmp_pm_api_sys.c
@@ -1496,7 +1496,7 @@
*
* This function returns requested data.
*/
-void pm_query_data(enum pm_query_id qid, uint32_t arg1, uint32_t arg2,
+void pm_query_data(enum pm_query_ids qid, uint32_t arg1, uint32_t arg2,
uint32_t arg3, uint32_t *data)
{
switch (qid) {
diff --git a/plat/xilinx/zynqmp/pm_service/zynqmp_pm_api_sys.h b/plat/xilinx/zynqmp/pm_service/zynqmp_pm_api_sys.h
index 7d26554..71a0bd5 100644
--- a/plat/xilinx/zynqmp/pm_service/zynqmp_pm_api_sys.h
+++ b/plat/xilinx/zynqmp/pm_service/zynqmp_pm_api_sys.h
@@ -11,8 +11,9 @@
#include <stdint.h>
#include "pm_defs.h"
+#include "zynqmp_pm_defs.h"
-enum pm_query_id {
+enum pm_query_ids {
PM_QID_INVALID,
PM_QID_CLOCK_GET_NAME,
PM_QID_CLOCK_GET_TOPOLOGY,
@@ -150,7 +151,7 @@
uint32_t parent_index);
enum pm_ret_status pm_clock_getparent(uint32_t clock_id,
uint32_t *parent_index);
-void pm_query_data(enum pm_query_id qid, uint32_t arg1, uint32_t arg2,
+void pm_query_data(enum pm_query_ids qid, uint32_t arg1, uint32_t arg2,
uint32_t arg3, uint32_t *data);
enum pm_ret_status pm_sha_hash(uint32_t address_high,
uint32_t address_low,
diff --git a/plat/xilinx/zynqmp/pm_service/zynqmp_pm_defs.h b/plat/xilinx/zynqmp/pm_service/zynqmp_pm_defs.h
new file mode 100644
index 0000000..c82a3ef
--- /dev/null
+++ b/plat/xilinx/zynqmp/pm_service/zynqmp_pm_defs.h
@@ -0,0 +1,209 @@
+/*
+ * Copyright (c) 2013-2022, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2022-2023, Advanced Micro Devices, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* ZynqMP power management enums and defines */
+
+#ifndef ZYNQMP_PM_DEFS_H
+#define ZYNQMP_PM_DEFS_H
+
+/*********************************************************************
+ * Macro definitions
+ ********************************************************************/
+
+/*
+ * Version number is a 32bit value, like:
+ * (PM_VERSION_MAJOR << 16) | PM_VERSION_MINOR
+ */
+#define PM_VERSION_MAJOR 1U
+#define PM_VERSION_MINOR 1U
+
+#define PM_VERSION ((PM_VERSION_MAJOR << 16U) | PM_VERSION_MINOR)
+
+/**
+ * PM API versions
+ */
+/* Expected version of firmware APIs */
+#define FW_API_BASE_VERSION (1U)
+/* Expected version of firmware API for feature check */
+#define FW_API_VERSION_2 (2U)
+/* Version of APIs implemented in ATF */
+#define ATF_API_BASE_VERSION (1U)
+/* Updating the QUERY_DATA API versioning as the bitmask functionality
+ * support is added in the v2.*/
+#define TFA_API_QUERY_DATA_VERSION (2U)
+
+/* Capabilities for RAM */
+#define PM_CAP_ACCESS 0x1U
+#define PM_CAP_CONTEXT 0x2U
+
+/* APU processor states */
+#define PM_PROC_STATE_FORCEDOFF 0U
+#define PM_PROC_STATE_ACTIVE 1U
+#define PM_PROC_STATE_SLEEP 2U
+#define PM_PROC_STATE_SUSPENDING 3U
+
+#define PM_SET_SUSPEND_MODE 0xa02
+
+/*********************************************************************
+ * Enum definitions
+ ********************************************************************/
+
+enum pm_node_id {
+ NODE_UNKNOWN = 0,
+ NODE_APU,
+ NODE_APU_0,
+ NODE_APU_1,
+ NODE_APU_2,
+ NODE_APU_3,
+ NODE_RPU,
+ NODE_RPU_0,
+ NODE_RPU_1,
+ NODE_PLD,
+ NODE_FPD,
+ NODE_OCM_BANK_0,
+ NODE_OCM_BANK_1,
+ NODE_OCM_BANK_2,
+ NODE_OCM_BANK_3,
+ NODE_TCM_0_A,
+ NODE_TCM_0_B,
+ NODE_TCM_1_A,
+ NODE_TCM_1_B,
+ NODE_L2,
+ NODE_GPU_PP_0,
+ NODE_GPU_PP_1,
+ NODE_USB_0,
+ NODE_USB_1,
+ NODE_TTC_0,
+ NODE_TTC_1,
+ NODE_TTC_2,
+ NODE_TTC_3,
+ NODE_SATA,
+ NODE_ETH_0,
+ NODE_ETH_1,
+ NODE_ETH_2,
+ NODE_ETH_3,
+ NODE_UART_0,
+ NODE_UART_1,
+ NODE_SPI_0,
+ NODE_SPI_1,
+ NODE_I2C_0,
+ NODE_I2C_1,
+ NODE_SD_0,
+ NODE_SD_1,
+ NODE_DP,
+ NODE_GDMA,
+ NODE_ADMA,
+ NODE_NAND,
+ NODE_QSPI,
+ NODE_GPIO,
+ NODE_CAN_0,
+ NODE_CAN_1,
+ NODE_EXTERN,
+ NODE_APLL,
+ NODE_VPLL,
+ NODE_DPLL,
+ NODE_RPLL,
+ NODE_IOPLL,
+ NODE_DDR,
+ NODE_IPI_APU,
+ NODE_IPI_RPU_0,
+ NODE_GPU,
+ NODE_PCIE,
+ NODE_PCAP,
+ NODE_RTC,
+ NODE_LPD,
+ NODE_VCU,
+ NODE_IPI_RPU_1,
+ NODE_IPI_PL_0,
+ NODE_IPI_PL_1,
+ NODE_IPI_PL_2,
+ NODE_IPI_PL_3,
+ NODE_PL,
+ NODE_GEM_TSU,
+ NODE_SWDT_0,
+ NODE_SWDT_1,
+ NODE_CSU,
+ NODE_PJTAG,
+ NODE_TRACE,
+ NODE_TESTSCAN,
+ NODE_PMU,
+ NODE_MAX,
+};
+
+enum pm_request_ack {
+ REQ_ACK_NO = 1,
+ REQ_ACK_BLOCKING,
+ REQ_ACK_NON_BLOCKING,
+};
+
+enum pm_suspend_reason {
+ SUSPEND_REASON_PU_REQ = 201,
+ SUSPEND_REASON_ALERT,
+ SUSPEND_REASON_SYS_SHUTDOWN,
+};
+
+enum pm_ram_state {
+ PM_RAM_STATE_OFF = 1,
+ PM_RAM_STATE_RETENTION,
+ PM_RAM_STATE_ON,
+};
+
+/**
+ * @PM_INITIAL_BOOT: boot is a fresh system startup
+ * @PM_RESUME: boot is a resume
+ * @PM_BOOT_ERROR: error, boot cause cannot be identified
+ */
+enum pm_boot_status {
+ PM_INITIAL_BOOT,
+ PM_RESUME,
+ PM_BOOT_ERROR,
+};
+
+/**
+ * @PMF_SHUTDOWN_TYPE_SHUTDOWN: shutdown
+ * @PMF_SHUTDOWN_TYPE_RESET: reset/reboot
+ * @PMF_SHUTDOWN_TYPE_SETSCOPE_ONLY: set the shutdown/reboot scope
+ */
+enum pm_shutdown_type {
+ PMF_SHUTDOWN_TYPE_SHUTDOWN,
+ PMF_SHUTDOWN_TYPE_RESET,
+ PMF_SHUTDOWN_TYPE_SETSCOPE_ONLY,
+};
+
+/**
+ * @PMF_SHUTDOWN_SUBTYPE_SUBSYSTEM: shutdown/reboot APU subsystem only
+ * @PMF_SHUTDOWN_SUBTYPE_PS_ONLY: shutdown/reboot entire PS (but not PL)
+ * @PMF_SHUTDOWN_SUBTYPE_SYSTEM: shutdown/reboot entire system
+ */
+enum pm_shutdown_subtype {
+ PMF_SHUTDOWN_SUBTYPE_SUBSYSTEM,
+ PMF_SHUTDOWN_SUBTYPE_PS_ONLY,
+ PMF_SHUTDOWN_SUBTYPE_SYSTEM,
+};
+
+/**
+ * @PM_PLL_MODE_RESET: PLL is in reset (not locked)
+ * @PM_PLL_MODE_INTEGER: PLL is locked in integer mode
+ * @PM_PLL_MODE_FRACTIONAL: PLL is locked in fractional mode
+ */
+enum pm_pll_mode {
+ PM_PLL_MODE_RESET,
+ PM_PLL_MODE_INTEGER,
+ PM_PLL_MODE_FRACTIONAL,
+ PM_PLL_MODE_MAX,
+};
+
+/**
+ * @PM_CLOCK_DIV0_ID: Clock divider 0
+ * @PM_CLOCK_DIV1_ID: Clock divider 1
+ */
+enum pm_clock_div_id {
+ PM_CLOCK_DIV0_ID,
+ PM_CLOCK_DIV1_ID,
+};
+
+#endif /* ZYNQMP_PM_DEFS_H */
diff --git a/plat/xilinx/zynqmp/pm_service/zynqmp_pm_svc_main.c b/plat/xilinx/zynqmp/pm_service/zynqmp_pm_svc_main.c
index b54936e..1ccf258 100644
--- a/plat/xilinx/zynqmp/pm_service/zynqmp_pm_svc_main.c
+++ b/plat/xilinx/zynqmp/pm_service/zynqmp_pm_svc_main.c
@@ -23,9 +23,9 @@
#include <plat_private.h>
#include "pm_client.h"
-#include "pm_defs.h"
#include "pm_ipi.h"
#include "zynqmp_pm_api_sys.h"
+#include "zynqmp_pm_defs.h"
/* pm_up = !0 - UP, pm_up = 0 - DOWN */
static int32_t pm_up, ipi_irq_flag;
diff --git a/plat/xilinx/zynqmp/sip_svc_setup.c b/plat/xilinx/zynqmp/sip_svc_setup.c
index 6ec7ed4..3844b16 100644
--- a/plat/xilinx/zynqmp/sip_svc_setup.c
+++ b/plat/xilinx/zynqmp/sip_svc_setup.c
@@ -14,6 +14,7 @@
#include <custom_svc.h>
#include "ipi_mailbox_svc.h"
+#include "pm_defs.h"
#include "zynqmp_pm_svc_main.h"
/* SMC function IDs for SiP Service queries */