feat(imx8mn): add workaround for errata ERR050362
Port the workaround from the downstream imx-atf [1]:
| commit 1990081264f40822d1564f4562f05bbbc0c2941b
| Author: Ji Luo <ji.luo@nxp.com>
| Date: Thu May 20 16:26:55 2021 +0800
|
| MA-19071 imx8mn: workaround for errata ERR050362
|
| Configure the force_incr programmable bit in GPV_5 of PL301_display,
| which fixes partial write issue. This workaround was done in MCU FW
| before, move it to TF-A now as MCU should not touch secure world.
|
| Change-Id: I2e5bbc764640afeab6ac2f4b202939b59bd3b3f2
| Signed-off-by: Ji Luo <ji.luo@nxp.com>
[1] https://github.com/nxp-imx/imx-atf.git
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: Iaff5f1faa143204d64c075b288f8dd13eb2902d8
diff --git a/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c b/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c
index 9117cf0..2308dfc 100644
--- a/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c
+++ b/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c
@@ -139,6 +139,13 @@
imx_csu_init(csu_cfg);
+ /*
+ * Configure the force_incr programmable bit in GPV_5 of PL301_display, which fixes
+ * partial write issue. The AXI2AHB bridge is used for masters that access the TCM
+ * through system bus. Please refer to errata ERR050362 for more information.
+ */
+ mmio_setbits_32((GPV5_BASE_ADDR + FORCE_INCR_OFFSET), FORCE_INCR_BIT_MASK);
+
/* config the ocram memory range for secure access */
mmio_write_32(IMX_IOMUX_GPR_BASE + 0x2c, 0x4c1);
val = mmio_read_32(IMX_IOMUX_GPR_BASE + 0x2c);