diff --git a/drivers/nxp/flexspi/nor/flexspi_nor.c b/drivers/nxp/flexspi/nor/flexspi_nor.c
new file mode 100644
index 0000000..748228d
--- /dev/null
+++ b/drivers/nxp/flexspi/nor/flexspi_nor.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <assert.h>
+
+#include <fspi_api.h>
+#include <lib/mmio.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+
+int flexspi_nor_io_setup(uintptr_t nxp_flexspi_flash_addr,
+			 size_t nxp_flexspi_flash_size, uint32_t fspi_base_reg_addr)
+{
+	int ret = 0;
+
+	ret = fspi_init(fspi_base_reg_addr, nxp_flexspi_flash_addr);
+	/* Adding NOR Memory Map in XLAT Table */
+	mmap_add_region(nxp_flexspi_flash_addr, nxp_flexspi_flash_addr,
+			nxp_flexspi_flash_size, MT_MEMORY | MT_RW);
+
+	return ret;
+}
diff --git a/drivers/nxp/flexspi/nor/flexspi_nor.h b/drivers/nxp/flexspi/nor/flexspi_nor.h
new file mode 100644
index 0000000..61fc236
--- /dev/null
+++ b/drivers/nxp/flexspi/nor/flexspi_nor.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright 2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef FLEXSPI_NOR_H
+#define FLEXSPI_NOR_H
+
+int flexspi_nor_io_setup(uintptr_t nxp_flexspi_flash_addr,
+			 size_t nxp_flexspi_flash_size,
+			 uint32_t fspi_base_reg_addr);
+
+#endif /*	FLEXSPI_NOR_H	*/
diff --git a/drivers/nxp/flexspi/nor/flexspi_nor.mk b/drivers/nxp/flexspi/nor/flexspi_nor.mk
new file mode 100644
index 0000000..6d9eebb
--- /dev/null
+++ b/drivers/nxp/flexspi/nor/flexspi_nor.mk
@@ -0,0 +1,35 @@
+#
+# Copyright 2020 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+ifeq (${XSPI_NOR},)
+XSPI_NOR	:= 1
+
+FLEXSPI_DRIVERS_PATH	:=  ${PLAT_DRIVERS_PATH}/flexspi/nor
+
+PLAT_XSPI_INCLUDES	+= -I$(FLEXSPI_DRIVERS_PATH)
+
+XSPI_BOOT_SOURCES	+= $(FLEXSPI_DRIVERS_PATH)/flexspi_nor.c	\
+			   ${FLEXSPI_DRIVERS_PATH}/fspi.c
+ifeq ($(DEBUG),1)
+XSPI_BOOT_SOURCES	+= ${FLEXSPI_DRIVERS_PATH}/test_fspi.c
+endif
+
+PLAT_XSPI_INCLUDES	+= -Iinclude/drivers/nxp/flexspi
+
+PLAT_INCLUDES		+= ${PLAT_XSPI_INCLUDES}
+
+ifeq (${BL_COMM_XSPI_NEEDED},yes)
+BL_COMMON_SOURCES	+= ${XSPI_BOOT_SOURCES}
+else
+ifeq (${BL2_XSPI_NEEDED},yes)
+BL2_SOURCES		+= ${XSPI_BOOT_SOURCES}
+endif
+ifeq (${BL31_XSPI_NEEDED},yes)
+BL31_SOURCES		+= ${XSPI_BOOT_SOURCES}
+endif
+endif
+
+endif
diff --git a/drivers/nxp/flexspi/nor/fspi.c b/drivers/nxp/flexspi/nor/fspi.c
new file mode 100644
index 0000000..7c919b8
--- /dev/null
+++ b/drivers/nxp/flexspi/nor/fspi.c
@@ -0,0 +1,853 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * NXP FlexSpi Controller Driver.
+ * Copyright 2021 NXP
+ *
+ */
+#include <endian.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+
+#include <common/debug.h>
+#include <flash_info.h>
+#include "fspi.h"
+#include <fspi_api.h>
+#include <xspi_error_codes.h>
+
+#ifdef DEBUG_FLEXSPI
+#define PR printf("In [%s][%d]\n", __func__, __LINE__)
+#define PRA(a, b) printf("In [%s][%d] %s="a"\n", __func__, __LINE__, #b, b)
+#else
+#define PR
+#define PRA(a, b)
+#endif
+
+/*
+ * This errata is valid for all NXP SoC.
+ */
+#define ERRATA_FLASH_A050272 1
+
+static uintptr_t fspi_base_reg_addr;
+static uintptr_t fspi_flash_base_addr;
+
+static void fspi_RDSR(uint32_t *, const void *, uint32_t);
+
+static void fspi_writel(uint32_t x_addr, uint32_t x_val)
+{
+	fspi_out32((uint32_t *)(fspi_base_reg_addr + x_addr),
+		 (uint32_t) x_val);
+}
+
+static uint32_t fspi_readl(uint32_t x_addr)
+{
+	return fspi_in32((uint32_t *)(fspi_base_reg_addr + x_addr));
+}
+
+static void fspi_MDIS(uint8_t x_disable)
+{
+	uint32_t ui_reg;
+
+	ui_reg = fspi_readl(FSPI_MCR0);
+	if (x_disable != 0U) {
+		ui_reg |= FSPI_MCR0_MDIS;
+	} else {
+		ui_reg &= (uint32_t) (~FSPI_MCR0_MDIS);
+	}
+
+	fspi_writel(FSPI_MCR0, ui_reg);
+}
+
+static void fspi_lock_LUT(void)
+{
+	fspi_writel(FSPI_LUTKEY, FSPI_LUTKEY_VALUE);
+	VERBOSE("%s 0x%x\n", __func__, fspi_readl(FSPI_LCKCR));
+	fspi_writel(FSPI_LCKCR, FSPI_LCKER_LOCK);
+	VERBOSE("%s 0x%x\n", __func__, fspi_readl(FSPI_LCKCR));
+}
+
+static void fspi_unlock_LUT(void)
+{
+	fspi_writel(FSPI_LUTKEY,  FSPI_LUTKEY_VALUE);
+	VERBOSE("%s 0x%x\n", __func__, fspi_readl(FSPI_LCKCR));
+	fspi_writel(FSPI_LCKCR, FSPI_LCKER_UNLOCK);
+	VERBOSE("%s 0x%x\n", __func__, fspi_readl(FSPI_LCKCR));
+}
+
+static void fspi_op_setup(uint32_t fspi_op_seq_id, bool ignore_flash_sz)
+{
+	uint32_t x_addr, x_instr0 = 0, x_instr1 = 0, x_instr2 = 0;
+	uint32_t cmd_id1, cmd_id2;
+
+	VERBOSE("In func %s\n", __func__);
+
+	switch (fspi_op_seq_id) {
+	case FSPI_READ_SEQ_ID:
+		cmd_id1 = FSPI_NOR_CMD_READ;
+		cmd_id2 = FSPI_NOR_CMD_READ_4B;
+		x_instr2 = FSPI_INSTR_OPRND0(0) | FSPI_INSTR_PAD0(FSPI_LUT_PAD1)
+				| FSPI_INSTR_OPCODE0(FSPI_LUT_READ);
+		break;
+	case FSPI_FASTREAD_SEQ_ID:
+		cmd_id1 = FSPI_NOR_CMD_FASTREAD;
+		cmd_id2 = FSPI_NOR_CMD_FASTREAD_4B;
+		x_instr2 = FSPI_INSTR_OPRND0(8) | FSPI_INSTR_PAD0(FSPI_LUT_PAD1)
+				| FSPI_INSTR_OPCODE0(FSPI_DUMMY_SDR)
+				| FSPI_INSTR_OPRND1(0)
+				| FSPI_INSTR_PAD1(FSPI_LUT_PAD1)
+				| FSPI_INSTR_OPCODE1(FSPI_LUT_READ);
+		break;
+	case FSPI_WRITE_SEQ_ID:
+		cmd_id1 = FSPI_NOR_CMD_PP;
+		cmd_id2 = FSPI_NOR_CMD_PP_4B;
+		x_instr2 = FSPI_INSTR_OPRND0(0) | FSPI_INSTR_PAD0(FSPI_LUT_PAD1)
+				| FSPI_INSTR_OPCODE0(FSPI_LUT_WRITE);
+		break;
+	case FSPI_WREN_SEQ_ID:
+		cmd_id1 = FSPI_NOR_CMD_WREN;
+		cmd_id2 = FSPI_NOR_CMD_WREN;
+		break;
+	case FSPI_SE_SEQ_ID:
+		cmd_id1 = FSPI_NOR_CMD_SE_64K;
+		cmd_id2 = FSPI_NOR_CMD_SE_64K_4B;
+		break;
+	case FSPI_4K_SEQ_ID:
+		cmd_id1 = FSPI_NOR_CMD_SE_4K;
+		cmd_id2 = FSPI_NOR_CMD_SE_4K_4B;
+		break;
+	case FSPI_BE_SEQ_ID:
+		cmd_id1 = FSPI_NOR_CMD_BE;
+		cmd_id2 = FSPI_NOR_CMD_BE;
+		break;
+	case FSPI_RDSR_SEQ_ID:
+		cmd_id1 = FSPI_NOR_CMD_RDSR;
+		cmd_id2 = FSPI_NOR_CMD_RDSR;
+		break;
+	}
+
+	x_addr = FSPI_LUTREG_OFFSET + (uint32_t)(0x10 * fspi_op_seq_id);
+	if ((F_FLASH_SIZE_BYTES <= SZ_16M_BYTES) || (ignore_flash_sz)) {
+		x_instr0 = FSPI_INSTR_OPRND0(cmd_id1);
+		x_instr1 = FSPI_INSTR_OPRND1(FSPI_LUT_ADDR24BIT);
+		VERBOSE("CMD_ID = %x offset = 0x%x\n", cmd_id1, x_addr);
+	} else {
+		x_instr0 = FSPI_INSTR_OPRND0(cmd_id2);
+		x_instr1 = FSPI_INSTR_OPRND1(FSPI_LUT_ADDR32BIT);
+		VERBOSE("CMD_ID = %x offset = 0x%x\n", cmd_id2, x_addr);
+	}
+	x_instr0 |= FSPI_INSTR_PAD0(FSPI_LUT_PAD1)
+		| FSPI_INSTR_OPCODE0(FSPI_LUT_CMD);
+
+	x_instr1 |= FSPI_INSTR_PAD1(FSPI_LUT_PAD1)
+		| FSPI_INSTR_OPCODE1(FSPI_LUT_ADDR);
+
+	if (fspi_op_seq_id == FSPI_RDSR_SEQ_ID) {
+		x_instr0 |= FSPI_INSTR_OPRND1(1) | FSPI_INSTR_PAD1(FSPI_LUT_PAD1)
+					| FSPI_INSTR_OPCODE1(FSPI_LUT_READ);
+	} else if ((fspi_op_seq_id != FSPI_BE_SEQ_ID)
+			&& (fspi_op_seq_id != FSPI_WREN_SEQ_ID)) {
+		x_instr0 |= x_instr1;
+	}
+
+	fspi_writel((x_addr), x_instr0);
+	fspi_writel((x_addr + U(0x4)), x_instr2);
+	fspi_writel((x_addr + U(0x8)), (uint32_t) 0x0);	/* STOP command */
+	fspi_writel((x_addr + U(0xc)), (uint32_t) 0x0);	/* STOP command */
+}
+
+static void fspi_setup_LUT(void)
+{
+	VERBOSE("In func %s\n", __func__);
+	fspi_unlock_LUT();
+
+	/* LUT Setup for READ Command 3-Byte low Frequency */
+	fspi_op_setup(FSPI_READ_SEQ_ID, false);
+
+	/* LUT Setup for FAST READ Command 3-Byte/4-Byte high Frequency */
+	fspi_op_setup(FSPI_FASTREAD_SEQ_ID, false);
+
+	/* LUT Setup for Page Program */
+	fspi_op_setup(FSPI_WRITE_SEQ_ID, false);
+
+	/* LUT Setup for WREN */
+	fspi_op_setup(FSPI_WREN_SEQ_ID, true);
+
+	/* LUT Setup for Sector_Erase */
+	fspi_op_setup(FSPI_SE_SEQ_ID, false);
+
+	/* LUT Setup for Sub Sector 4K Erase */
+	fspi_op_setup(FSPI_4K_SEQ_ID, false);
+
+	/* LUT Setup for Bulk_Erase */
+	fspi_op_setup(FSPI_BE_SEQ_ID, true);
+
+	/* Read Status */
+	fspi_op_setup(FSPI_RDSR_SEQ_ID, true);
+
+	fspi_lock_LUT();
+}
+
+static inline void fspi_ahb_invalidate(void)
+{
+	uint32_t reg;
+
+	VERBOSE("In func %s %d\n", __func__, __LINE__);
+	reg = fspi_readl(FSPI_MCR0);
+	reg |= FSPI_MCR0_SWRST;
+	fspi_writel(FSPI_MCR0, reg);
+	while ((fspi_readl(FSPI_MCR0) & FSPI_MCR0_SWRST) != 0)
+		;  /* FSPI_MCR0_SWRESET_MASK */
+	VERBOSE("In func %s %d\n", __func__, __LINE__);
+}
+
+#if defined(CONFIG_FSPI_AHB)
+static void fspi_init_ahb(void)
+{
+	uint32_t i, x_flash_cr2, seq_id;
+
+	x_flash_cr2 = 0;
+	/* Reset AHB RX buffer CR configuration */
+	for (i = 0; i < 8; i++) {
+		fspi_writel((FSPI_AHBRX_BUF0CR0 + 4 * i), 0U);
+	}
+
+	/* Set ADATSZ with the maximum AHB buffer size */
+	fspi_writel(FSPI_AHBRX_BUF7CR0,
+			((uint32_t) ((FSPI_RX_MAX_AHBBUF_SIZE / 8U) |
+				    FSPI_AHBRXBUF0CR7_PREF)));
+
+	/* Known limitation handling: prefetch and
+	 * no start address alignment.*/
+	fspi_writel(FSPI_AHBCR, FSPI_AHBCR_PREF_EN);
+	INFO("xAhbcr=0x%x\n", fspi_readl(FSPI_AHBCR));
+
+	// Setup AHB READ sequenceID for all flashes.
+	x_flash_cr2 = fspi_readl(FSPI_FLSHA1CR2);
+	INFO("x_flash_cr2=0x%x\n", x_flash_cr2);
+
+	seq_id = CONFIG_FSPI_FASTREAD ?
+			FSPI_FASTREAD_SEQ_ID : FSPI_READ_SEQ_ID;
+	x_flash_cr2 |= ((seq_id << FSPI_FLSHXCR2_ARDSEQI_SHIFT) & 0x1f);
+
+	INFO("x_flash_cr2=0x%x\n", x_flash_cr2);
+
+	fspi_writel(FSPI_FLSHA1CR2,  x_flash_cr2);
+	x_flash_cr2 = fspi_readl(FSPI_FLSHA1CR2);
+	INFO("x_flash_cr2=0x%x\n", x_flash_cr2);
+}
+#endif
+
+int xspi_read(uint32_t pc_rx_addr, uint32_t *pc_rx_buf, uint32_t x_size_bytes)
+{
+	if (x_size_bytes == 0) {
+		ERROR("Zero length reads are not allowed\n");
+		return XSPI_READ_FAIL;
+	}
+
+#if defined(CONFIG_FSPI_AHB)
+	return xspi_ahb_read(pc_rx_addr, pc_rx_buf, x_size_bytes);
+#else
+	return xspi_ip_read(pc_rx_addr, pc_rx_buf, x_size_bytes);
+#endif
+}
+#if defined(CONFIG_FSPI_AHB)
+int xspi_ahb_read(uint32_t pc_rx_addr, uint32_t *pc_rx_buf, uint32_t x_size_bytes)
+{
+	VERBOSE("In func %s 0x%x\n", __func__, (pc_rx_addr));
+
+	if (F_FLASH_SIZE_BYTES <= SZ_16M_BYTES) {
+		pc_rx_addr = ((uint32_t)(pcRxAddr & MASK_24BIT_ADDRESS));
+	} else {
+		pc_rx_addr = ((uint32_t)(pcRxAddr & MASK_32BIT_ADDRESS));
+	}
+
+	pc_rx_addr = ((uint32_t)(pcRxAddr + fspi_flash_base_addr));
+
+	if (((pc_rx_addr % 4) != 0) || (((uintptr_t)pc_rx_buf % 4) != 0)) {
+		WARN("%s: unaligned Start Address src=%ld dst=0x%p\n",
+		     __func__, (pc_rx_addr - fspi_flash_base_addr), pc_rx_buf);
+	}
+
+	/* Directly copy from AHB Buffer */
+	memcpy(pc_rx_buf, (void *)(uintptr_t)pc_rx_addr, x_size_bytes);
+
+	fspi_ahb_invalidate();
+	return XSPI_SUCCESS;
+}
+#endif
+
+int xspi_ip_read(uint32_t pc_rx_addr, uint32_t *pv_rx_buf, uint32_t ui_len)
+{
+
+	uint32_t i = 0U, j = 0U, x_rem = 0U;
+	uint32_t x_iteration = 0U, x_size_rx = 0U, x_size_wm, temp_size;
+	uint32_t data = 0U;
+	uint32_t x_len_bytes;
+	uint32_t x_addr, sts0, intr, seq_id;
+
+	x_addr = (uint32_t) pc_rx_addr;
+	x_len_bytes = ui_len;
+
+	/* Watermark level : 8 bytes. (BY DEFAULT) */
+	x_size_wm = 8U;
+
+	/* Clear  RX Watermark interrupt in INT register, if any existing.  */
+	fspi_writel(FSPI_INTR, FSPI_INTR_IPRXWA);
+	PRA("0x%x", fspi_readl(FSPI_INTR));
+	/* Invalid the RXFIFO, to run next IP Command */
+	/* Clears data entries in IP Rx FIFOs, Also reset R/W pointers */
+	fspi_writel(FSPI_IPRXFCR, FSPI_IPRXFCR_CLR);
+	fspi_writel(FSPI_INTR, FSPI_INTEN_IPCMDDONE);
+
+	while (x_len_bytes) {
+
+		/* FlexSPI can store no more than  FSPI_RX_IPBUF_SIZE */
+		x_size_rx = (x_len_bytes >  FSPI_RX_IPBUF_SIZE) ?
+			   FSPI_RX_IPBUF_SIZE : x_len_bytes;
+
+		/* IP Control Register0 - SF Address to be read */
+		fspi_writel(FSPI_IPCR0, x_addr);
+		PRA("0x%x", fspi_readl(FSPI_IPCR0));
+		/* IP Control Register1 - SEQID_READ operation, Size */
+
+		seq_id = CONFIG_FSPI_FASTREAD ?
+				FSPI_FASTREAD_SEQ_ID : FSPI_READ_SEQ_ID;
+
+		fspi_writel(FSPI_IPCR1,
+			    (uint32_t)(seq_id << FSPI_IPCR1_ISEQID_SHIFT) |
+			    (uint16_t) x_size_rx);
+
+		PRA("0x%x", fspi_readl(FSPI_IPCR1));
+
+		do {
+			sts0 = fspi_readl(FSPI_STS0);
+		} while (((sts0 & FSPI_STS0_ARB_IDLE) == 0) &&
+			 ((sts0 & FSPI_STS0_SEQ_IDLE) == 0));
+
+		/* Trigger IP Read Command */
+		fspi_writel(FSPI_IPCMD, FSPI_IPCMD_TRG_MASK);
+		PRA("0x%x", fspi_readl(FSPI_IPCMD));
+
+		intr = fspi_readl(FSPI_INTR);
+		if (((intr & FSPI_INTR_IPCMDGE) != 0) ||
+		    ((intr & FSPI_INTR_IPCMDERR) != 0)) {
+			ERROR("Error in IP READ INTR=0x%x\n", intr);
+			return -XSPI_IP_READ_FAIL;
+		}
+		/* Will read in n iterations of each 8 FIFO's(WM level) */
+		x_iteration = x_size_rx / x_size_wm;
+		for (i = 0U; i < x_iteration; i++) {
+			if ((fspi_readl(FSPI_INTR) & FSPI_INTR_IPRXWA_MASK) == 0) {
+				PRA("0x%x", fspi_readl(FSPI_INTR));
+			}
+			/* Wait for IP Rx Watermark Fill event */
+			while (!(fspi_readl(FSPI_INTR) & FSPI_INTR_IPRXWA_MASK)) {
+				PRA("0x%x", fspi_readl(FSPI_INTR));
+			}
+
+			/* Read RX FIFO's(upto WM level) & copy to rxbuffer */
+			for (j = 0U; j < x_size_wm; j += 4U) {
+				/* Read FIFO Data Register */
+				data = fspi_readl(FSPI_RFDR + j);
+#if FSPI_IPDATA_SWAP /* Just In case you want swap */
+				data = bswap32(data);
+#endif
+				memcpy(pv_rx_buf++, &data, 4);
+			}
+
+			/* Clear IP_RX_WATERMARK Event in INTR register */
+			/* Reset FIFO Read pointer for next iteration.*/
+			fspi_writel(FSPI_INTR, FSPI_INTR_IPRXWA);
+		}
+
+		x_rem = x_size_rx % x_size_wm;
+
+		if (x_rem != 0U) {
+			/* Wait for data filled */
+			while (!(fspi_readl(FSPI_IPRXFSTS) & FSPI_IPRXFSTS_FILL_MASK)) {
+				PRA("0x%x", fspi_readl(FSPI_IPRXFSTS));
+			}
+
+			temp_size = 0;
+			j = 0U;
+			while (x_rem > 0U) {
+				data = 0U;
+				data =  fspi_readl(FSPI_RFDR + j);
+#if FSPI_IPDATA_SWAP /* Just In case you want swap */
+				data = bswap32(data);
+#endif
+				temp_size = (x_rem < 4) ? x_rem : 4;
+				memcpy(pv_rx_buf++, &data, temp_size);
+				x_rem -= temp_size;
+			}
+		}
+
+
+		while (!(fspi_readl(FSPI_INTR) & FSPI_INTR_IPCMDDONE_MASK)) {
+			PRA("0x%x", fspi_readl(FSPI_INTR));
+		}
+
+		/* Invalid the RX FIFO, to run next IP Command */
+		fspi_writel(FSPI_IPRXFCR, FSPI_IPRXFCR_CLR);
+		/* Clear IP Command Done flag in interrupt register*/
+		fspi_writel(FSPI_INTR, FSPI_INTR_IPCMDDONE_MASK);
+
+		/* Update remaining len, Increment x_addr read pointer. */
+		x_len_bytes -= x_size_rx;
+		x_addr += x_size_rx;
+	}
+	PR;
+	return XSPI_SUCCESS;
+}
+
+void xspi_ip_write(uint32_t pc_wr_addr, uint32_t *pv_wr_buf, uint32_t ui_len)
+{
+
+	uint32_t x_iteration = 0U, x_rem = 0U;
+	uint32_t x_size_tx = 0U, x_size_wm, temp_size;
+	uint32_t i = 0U, j = 0U;
+	uint32_t ui_data = 0U;
+	uint32_t x_addr, x_len_bytes;
+
+
+	x_size_wm = 8U;	/* Default TX WaterMark level: 8 Bytes. */
+	x_addr = (uint32_t)pc_wr_addr;
+	x_len_bytes = ui_len;
+	VERBOSE("In func %s[%d] x_addr =0x%x xLen_bytes=%d\n",
+			__func__, __LINE__, x_addr, x_len_bytes);
+
+	while (x_len_bytes != 0U) {
+
+		x_size_tx = (x_len_bytes >  FSPI_TX_IPBUF_SIZE) ?
+				FSPI_TX_IPBUF_SIZE : x_len_bytes;
+
+		/* IP Control Register0 - SF Address to be read */
+		fspi_writel(FSPI_IPCR0, x_addr);
+		INFO("In func %s[%d] x_addr =0x%x xLen_bytes=%d\n",
+				__func__, __LINE__, x_addr, x_len_bytes);
+
+		/*
+		 * Fill TX FIFO's..
+		 *
+		 */
+
+		x_iteration = x_size_tx / x_size_wm;
+		for (i = 0U; i < x_iteration; i++) {
+
+			/* Ensure TX FIFO Watermark Available */
+			while ((fspi_readl(FSPI_INTR) & FSPI_INTR_IPTXWE_MASK) == 0)
+				;
+
+
+			/* Fill TxFIFO's ( upto watermark level) */
+			for (j = 0U; j < x_size_wm; j += 4U) {
+				memcpy(&ui_data, pv_wr_buf++,  4);
+				/* Write TX FIFO Data Register */
+				fspi_writel((FSPI_TFDR + j), ui_data);
+
+			}
+
+			/* Clear IP_TX_WATERMARK Event in INTR register */
+			/* Reset the FIFO Write pointer for next iteration */
+			fspi_writel(FSPI_INTR, FSPI_INTR_IPTXWE);
+		}
+
+		x_rem = x_size_tx % x_size_wm;
+
+		if (x_rem != 0U) {
+			/* Wait for TXFIFO empty */
+			while (!(fspi_readl(FSPI_INTR) & FSPI_INTR_IPTXWE))
+				;
+
+			temp_size = 0U;
+			j = 0U;
+			while (x_rem > 0U) {
+				ui_data = 0U;
+				temp_size = (x_rem < 4U) ? x_rem : 4U;
+				memcpy(&ui_data, pv_wr_buf++, temp_size);
+				INFO("%d ---> pv_wr_buf=0x%p\n", __LINE__, pv_wr_buf);
+				fspi_writel((FSPI_TFDR + j), ui_data);
+				x_rem -= temp_size;
+				j += 4U ; /* TODO: May not be needed*/
+			}
+			/* Clear IP_TX_WATERMARK Event in INTR register */
+			/* Reset FIFO's Write pointer for next iteration.*/
+			fspi_writel(FSPI_INTR, FSPI_INTR_IPTXWE);
+		}
+
+		/* IP Control Register1 - SEQID_WRITE operation, Size */
+		fspi_writel(FSPI_IPCR1, (uint32_t)(FSPI_WRITE_SEQ_ID << FSPI_IPCR1_ISEQID_SHIFT) | (uint16_t) x_size_tx);
+		/* Trigger IP Write Command */
+		fspi_writel(FSPI_IPCMD, FSPI_IPCMD_TRG_MASK);
+
+		/* Wait for IP Write command done */
+		while (!(fspi_readl(FSPI_INTR) & FSPI_INTR_IPCMDDONE_MASK))
+			;
+
+		/* Invalidate TX FIFOs & acknowledge IP_CMD_DONE event */
+		fspi_writel(FSPI_IPTXFCR, FSPI_IPTXFCR_CLR);
+		fspi_writel(FSPI_INTR, FSPI_INTR_IPCMDDONE_MASK);
+
+		/* for next iteration */
+		x_len_bytes  -=  x_size_tx;
+		x_addr += x_size_tx;
+	}
+
+}
+
+int xspi_write(uint32_t pc_wr_addr, void *pv_wr_buf, uint32_t ui_len)
+{
+
+	uint32_t x_addr;
+	uint32_t x_page1_len = 0U, x_page_l_len = 0U;
+	uint32_t i, j = 0U;
+	void *buf = pv_wr_buf;
+
+	VERBOSE("\nIn func %s\n", __func__);
+
+	x_addr = (uint32_t)(pc_wr_addr);
+	if ((ui_len <= F_PAGE_256) && ((x_addr % F_PAGE_256) == 0)) {
+		x_page1_len = ui_len;
+		INFO("%d ---> x_page1_len=0x%x x_page_l_len =0x%x j=0x%x\n", __LINE__, x_page1_len, x_page_l_len, j);
+	} else if ((ui_len <= F_PAGE_256) && ((x_addr % F_PAGE_256) != 0)) {
+		x_page1_len = (F_PAGE_256 - (x_addr % F_PAGE_256));
+		if (ui_len > x_page1_len) {
+			x_page_l_len = (ui_len - x_page1_len) % F_PAGE_256;
+		} else {
+			x_page1_len = ui_len;
+			x_page_l_len = 0;
+		}
+		j = 0U;
+		INFO("%d 0x%x 0x%x\n", x_addr % F_PAGE_256, x_addr % F_PAGE_256, F_PAGE_256);
+		INFO("%d ---> x_page1_len=0x%x x_page_l_len =0x%x j=0x%x\n", __LINE__, x_page1_len, x_page_l_len, j);
+	} else if ((ui_len > F_PAGE_256) && ((x_addr % F_PAGE_256) == 0)) {
+		j = ui_len / F_PAGE_256;
+		x_page_l_len = ui_len % F_PAGE_256;
+		INFO("%d ---> x_page1_len=0x%x x_page_l_len =0x%x j=0x%x\n", __LINE__, x_page1_len, x_page_l_len, j);
+	} else if ((ui_len > F_PAGE_256) && ((x_addr % F_PAGE_256) != 0)) {
+		x_page1_len = (F_PAGE_256 - (x_addr % F_PAGE_256));
+		j = (ui_len - x_page1_len) / F_PAGE_256;
+		x_page_l_len = (ui_len - x_page1_len) % F_PAGE_256;
+		INFO("%d ---> x_page1_len=0x%x x_page_l_len =0x%x j=0x%x\n", __LINE__, x_page1_len, x_page_l_len, j);
+	}
+
+	if (x_page1_len != 0U) {
+		xspi_wren(x_addr);
+		xspi_ip_write(x_addr, (uint32_t *)buf, x_page1_len);
+		while (is_flash_busy())
+			;
+		INFO("%d Initial pc_wr_addr=0x%x, Final x_addr=0x%x, Initial ui_len=0x%x Final ui_len=0x%x\n",
+		     __LINE__, pc_wr_addr, x_addr, ui_len, (x_addr-pc_wr_addr));
+		INFO("Initial Buf pv_wr_buf=%p, final Buf=%p\n", pv_wr_buf, buf);
+		x_addr += x_page1_len;
+		/* TODO What is buf start is not 4 aligned */
+		buf = buf + x_page1_len;
+	}
+
+	for (i = 0U; i < j; i++) {
+		INFO("In for loop Buf pv_wr_buf=%p, final Buf=%p x_addr=0x%x offset_buf %d.\n",
+				pv_wr_buf, buf, x_addr, x_page1_len/4);
+		xspi_wren(x_addr);
+		xspi_ip_write(x_addr, (uint32_t *)buf, F_PAGE_256);
+		while (is_flash_busy())
+			;
+		INFO("%d Initial pc_wr_addr=0x%x, Final x_addr=0x%x, Initial ui_len=0x%x Final ui_len=0x%x\n",
+		     __LINE__, pc_wr_addr, x_addr, ui_len, (x_addr-pc_wr_addr));
+		x_addr += F_PAGE_256;
+		/* TODO What is buf start is not 4 aligned */
+		buf = buf + F_PAGE_256;
+		INFO("Initial Buf pv_wr_buf=%p, final Buf=%p\n", pv_wr_buf, buf);
+	}
+
+	if (x_page_l_len != 0U) {
+		INFO("%d Initial Buf pv_wr_buf=%p, final Buf=%p x_page_l_len=0x%x\n", __LINE__, pv_wr_buf, buf, x_page_l_len);
+		xspi_wren(x_addr);
+		xspi_ip_write(x_addr, (uint32_t *)buf, x_page_l_len);
+		while (is_flash_busy())
+			;
+		INFO("%d Initial pc_wr_addr=0x%x, Final x_addr=0x%x, Initial ui_len=0x%x Final ui_len=0x%x\n",
+				__LINE__, pc_wr_addr, x_addr, ui_len, (x_addr-pc_wr_addr));
+	}
+
+	VERBOSE("Now calling func call Invalidate%s\n", __func__);
+	fspi_ahb_invalidate();
+	return XSPI_SUCCESS;
+}
+
+int xspi_wren(uint32_t pc_wr_addr)
+{
+	VERBOSE("In func %s Addr=0x%x\n", __func__, pc_wr_addr);
+
+	fspi_writel(FSPI_IPTXFCR, FSPI_IPTXFCR_CLR);
+
+	fspi_writel(FSPI_IPCR0, (uint32_t)pc_wr_addr);
+	fspi_writel(FSPI_IPCR1, ((FSPI_WREN_SEQ_ID << FSPI_IPCR1_ISEQID_SHIFT) |  0));
+	fspi_writel(FSPI_IPCMD, FSPI_IPCMD_TRG_MASK);
+
+	while ((fspi_readl(FSPI_INTR) & FSPI_INTR_IPCMDDONE_MASK) == 0)
+		;
+
+	fspi_writel(FSPI_INTR, FSPI_INTR_IPCMDDONE_MASK);
+	return XSPI_SUCCESS;
+}
+
+static void fspi_bbluk_er(void)
+{
+	VERBOSE("In func %s\n", __func__);
+	fspi_writel(FSPI_IPCR0, 0x0);
+	fspi_writel(FSPI_IPCR1, ((FSPI_BE_SEQ_ID << FSPI_IPCR1_ISEQID_SHIFT) | 20));
+	fspi_writel(FSPI_IPCMD, FSPI_IPCMD_TRG_MASK);
+
+	while ((fspi_readl(FSPI_INTR) & FSPI_INTR_IPCMDDONE_MASK) == 0)
+		;
+	fspi_writel(FSPI_INTR, FSPI_INTR_IPCMDDONE_MASK);
+
+}
+
+static void fspi_RDSR(uint32_t *rxbuf, const void *p_addr, uint32_t size)
+{
+	uint32_t iprxfcr = 0U;
+	uint32_t data = 0U;
+
+	iprxfcr = fspi_readl(FSPI_IPRXFCR);
+	/* IP RX FIFO would be read by processor */
+	iprxfcr = iprxfcr & (uint32_t)~FSPI_IPRXFCR_CLR;
+	/* Invalid data entries in IP RX FIFO */
+	iprxfcr = iprxfcr | FSPI_IPRXFCR_CLR;
+	fspi_writel(FSPI_IPRXFCR, iprxfcr);
+
+	fspi_writel(FSPI_IPCR0, (uintptr_t) p_addr);
+	fspi_writel(FSPI_IPCR1,
+		    (uint32_t) ((FSPI_RDSR_SEQ_ID << FSPI_IPCR1_ISEQID_SHIFT)
+		    | (uint16_t) size));
+	/* Trigger the command */
+	fspi_writel(FSPI_IPCMD, FSPI_IPCMD_TRG_MASK);
+	/* Wait for command done */
+	while ((fspi_readl(FSPI_INTR) & FSPI_INTR_IPCMDDONE_MASK) == 0)
+		;
+	fspi_writel(FSPI_INTR, FSPI_INTR_IPCMDDONE_MASK);
+
+	data = fspi_readl(FSPI_RFDR);
+	memcpy(rxbuf, &data, size);
+
+	/* Rx FIFO invalidation needs to be done prior w1c of INTR.IPRXWA bit */
+	fspi_writel(FSPI_IPRXFCR, FSPI_IPRXFCR_CLR);
+	fspi_writel(FSPI_INTR, FSPI_INTR_IPRXWA_MASK);
+	fspi_writel(FSPI_INTR, FSPI_INTR_IPCMDDONE_MASK);
+
+}
+
+bool is_flash_busy(void)
+{
+#define FSPI_ONE_BYTE 1
+	uint8_t data[4];
+
+	VERBOSE("In func %s\n\n", __func__);
+	fspi_RDSR((uint32_t *) data, 0, FSPI_ONE_BYTE);
+
+	return !!((uint32_t) data[0] & FSPI_NOR_SR_WIP_MASK);
+}
+
+int xspi_bulk_erase(void)
+{
+	VERBOSE("In func %s\n", __func__);
+	xspi_wren((uint32_t) 0x0);
+	fspi_bbluk_er();
+	while (is_flash_busy())
+		;
+	fspi_ahb_invalidate();
+	return XSPI_SUCCESS;
+}
+
+static void fspi_sec_er(uint32_t pc_wr_addr)
+{
+	uint32_t x_addr;
+
+	VERBOSE("In func %s\n", __func__);
+	x_addr = (uint32_t)(pc_wr_addr);
+
+	fspi_writel(FSPI_IPCR0, x_addr);
+	INFO("In [%s][%d] Erase address 0x%x\n", __func__, __LINE__, (x_addr));
+#if CONFIG_FSPI_ERASE_4K
+	fspi_writel(FSPI_IPCR1, ((FSPI_4K_SEQ_ID << FSPI_IPCR1_ISEQID_SHIFT) | 0));
+#else
+	fspi_writel(FSPI_IPCR1, ((FSPI_SE_SEQ_ID << FSPI_IPCR1_ISEQID_SHIFT) | 0));
+#endif
+	fspi_writel(FSPI_IPCMD, FSPI_IPCMD_TRG_MASK);
+
+	while ((fspi_readl(FSPI_INTR) & FSPI_INTR_IPCMDDONE_MASK) == 0) {
+		PRA("0x%x", fspi_readl(FSPI_INTR));
+	}
+	fspi_writel(FSPI_INTR, FSPI_INTR_IPCMDDONE_MASK);
+}
+
+int xspi_sector_erase(uint32_t pc_wr_addr, uint32_t ui_len)
+{
+	uint32_t x_addr, x_len_bytes, i, num_sector = 0U;
+
+	VERBOSE("In func %s\n", __func__);
+	x_addr = (uint32_t)(pc_wr_addr);
+	if ((x_addr % F_SECTOR_ERASE_SZ) != 0) {
+		ERROR("!!! In func %s, unalinged start address can only be in multiples of 0x%x\n",
+		      __func__, F_SECTOR_ERASE_SZ);
+		return -XSPI_ERASE_FAIL;
+	}
+
+	x_len_bytes = ui_len * 1;
+	if (x_len_bytes < F_SECTOR_ERASE_SZ) {
+		ERROR("!!! In func %s, Less than 1 sector can only be in multiples of 0x%x\n",
+				__func__, F_SECTOR_ERASE_SZ);
+		return -XSPI_ERASE_FAIL;
+	}
+
+	num_sector = x_len_bytes/F_SECTOR_ERASE_SZ;
+	num_sector += x_len_bytes % F_SECTOR_ERASE_SZ ? 1U : 0U;
+	INFO("F_SECTOR_ERASE_SZ: 0x%08x, num_sector: %d\n", F_SECTOR_ERASE_SZ, num_sector);
+
+	for (i = 0U; i < num_sector ; i++) {
+		xspi_wren(x_addr + (F_SECTOR_ERASE_SZ * i));
+		fspi_sec_er(x_addr + (F_SECTOR_ERASE_SZ * i));
+		while (is_flash_busy())
+			;
+	}
+	fspi_ahb_invalidate();
+	return XSPI_SUCCESS;
+}
+
+
+__attribute__((unused)) static void  fspi_delay_ms(uint32_t x)
+{
+	volatile unsigned long  ul_count;
+
+	for (ul_count = 0U; ul_count < (30U * x); ul_count++)
+		;
+
+}
+
+
+#if defined(DEBUG_FLEXSPI)
+static void fspi_dump_regs(void)
+{
+	uint32_t i;
+
+	VERBOSE("\nRegisters Dump:\n");
+	VERBOSE("Flexspi: Register FSPI_MCR0(0x%x) = 0x%08x\n", FSPI_MCR0, fspi_readl(FSPI_MCR0));
+	VERBOSE("Flexspi: Register FSPI_MCR2(0x%x) = 0x%08x\n", FSPI_MCR2, fspi_readl(FSPI_MCR2));
+	VERBOSE("Flexspi: Register FSPI_DLL_A_CR(0x%x) = 0x%08x\n", FSPI_DLLACR, fspi_readl(FSPI_DLLACR));
+	VERBOSE("\n");
+
+	for (i = 0U; i < 8U; i++) {
+		VERBOSE("Flexspi: Register FSPI_AHBRX_BUF0CR0(0x%x) = 0x%08x\n", FSPI_AHBRX_BUF0CR0 + i * 4, fspi_readl((FSPI_AHBRX_BUF0CR0 + i * 4)));
+	}
+	VERBOSE("\n");
+
+	VERBOSE("Flexspi: Register FSPI_AHBRX_BUF7CR0(0x%x) = 0x%08x\n", FSPI_AHBRX_BUF7CR0, fspi_readl(FSPI_AHBRX_BUF7CR0));
+	VERBOSE("Flexspi: Register FSPI_AHB_CR(0x%x) \t  = 0x%08x\n", FSPI_AHBCR, fspi_readl(FSPI_AHBCR));
+	VERBOSE("\n");
+
+	for (i = 0U; i < 4U; i++) {
+		VERBOSE("Flexspi: Register FSPI_FLSH_A1_CR2,(0x%x) = 0x%08x\n", FSPI_FLSHA1CR2 + i * 4, fspi_readl(FSPI_FLSHA1CR2 + i * 4));
+	}
+}
+#endif
+
+int fspi_init(uint32_t base_reg_addr, uint32_t flash_start_addr)
+{
+	uint32_t	mcrx;
+	uint32_t	flash_size;
+
+	if (fspi_base_reg_addr != 0U) {
+		INFO("FSPI is already initialized.\n");
+		return XSPI_SUCCESS;
+	}
+
+	fspi_base_reg_addr = base_reg_addr;
+	fspi_flash_base_addr = flash_start_addr;
+
+	INFO("Flexspi driver: Version v1.0\n");
+	INFO("Flexspi: Default MCR0 = 0x%08x, before reset\n", fspi_readl(FSPI_MCR0));
+	VERBOSE("Flexspi: Resetting controller...\n");
+
+	/* Reset FlexSpi Controller */
+	fspi_writel(FSPI_MCR0, FSPI_MCR0_SWRST);
+	while ((fspi_readl(FSPI_MCR0) & FSPI_MCR0_SWRST))
+		;  /* FSPI_MCR0_SWRESET_MASK */
+
+
+	/* Disable Controller Module before programming its registersi, especially MCR0 (Master Control Register0) */
+	fspi_MDIS(1);
+	/*
+	 * Program MCR0 with default values, AHB Timeout(0xff), IP Timeout(0xff).  {FSPI_MCR0- 0xFFFF0000}
+	 */
+
+	/* Timeout wait cycle for AHB command grant */
+	mcrx = fspi_readl(FSPI_MCR0);
+	mcrx |= (uint32_t)((FSPI_MAX_TIMEOUT_AHBCMD << FSPI_MCR0_AHBGRANTWAIT_SHIFT) & (FSPI_MCR0_AHBGRANTWAIT_MASK));
+
+	/* Time out wait cycle for IP command grant*/
+	mcrx |= (uint32_t) (FSPI_MAX_TIMEOUT_IPCMD << FSPI_MCR0_IPGRANTWAIT_SHIFT) & (FSPI_MCR0_IPGRANTWAIT_MASK);
+
+	/* TODO why BE64 set BE32*/
+	mcrx |= (uint32_t) (FSPI_ENDCFG_LE64 << FSPI_MCR0_ENDCFG_SHIFT) & FSPI_MCR0_ENDCFG_MASK;
+
+	fspi_writel(FSPI_MCR0, mcrx);
+
+	/* Reset the DLL register to default value */
+	fspi_writel(FSPI_DLLACR, FSPI_DLLACR_OVRDEN);
+	fspi_writel(FSPI_DLLBCR, FSPI_DLLBCR_OVRDEN);
+
+#if ERRATA_FLASH_A050272	/* ERRATA DLL */
+	for (uint8_t delay = 100U; delay > 0U; delay--)	{
+		__asm__ volatile ("nop");
+	}
+#endif
+
+	/* Configure flash control registers for different chip select */
+	flash_size = (F_FLASH_SIZE_BYTES * FLASH_NUM) / FSPI_BYTES_PER_KBYTES;
+	fspi_writel(FSPI_FLSHA1CR0, flash_size);
+	fspi_writel(FSPI_FLSHA2CR0, 0U);
+	fspi_writel(FSPI_FLSHB1CR0, 0U);
+	fspi_writel(FSPI_FLSHB2CR0, 0U);
+
+#if defined(CONFIG_FSPI_AHB)
+	fspi_init_ahb();
+#endif
+	/* RE-Enable Controller Module */
+	fspi_MDIS(0);
+	INFO("Flexspi: After MCR0 = 0x%08x,\n", fspi_readl(FSPI_MCR0));
+	fspi_setup_LUT();
+
+	/* Dump of all registers, ensure controller not disabled anymore*/
+#if defined(DEBUG_FLEXSPI)
+	fspi_dump_regs();
+#endif
+
+	INFO("Flexspi: Init done!!\n");
+
+#if DEBUG_FLEXSPI
+
+	uint32_t xspi_addr = SZ_57M;
+
+	/*
+	 * Second argument of fspi_test is the size of buffer(s) passed
+	 * to the function.
+	 * SIZE_BUFFER defined in test_fspi.c is kept large enough to
+	 * accommodate variety of sizes for regressive tests.
+	 */
+	fspi_test(xspi_addr, 0x40, 0);
+	fspi_test(xspi_addr, 0x15, 2);
+	fspi_test(xspi_addr, 0x80, 0);
+	fspi_test(xspi_addr, 0x81, 0);
+	fspi_test(xspi_addr, 0x79, 3);
+
+	fspi_test(xspi_addr + 0x11, 0x15, 0);
+	fspi_test(xspi_addr + 0x11, 0x40, 0);
+	fspi_test(xspi_addr + 0xff, 0x40, 1);
+	fspi_test(xspi_addr + 0x25, 0x81, 2);
+	fspi_test(xspi_addr + 0xef, 0x6f, 3);
+
+	fspi_test((xspi_addr - F_SECTOR_ERASE_SZ), 0x229, 0);
+#endif
+
+	return XSPI_SUCCESS;
+}
diff --git a/drivers/nxp/flexspi/nor/fspi.h b/drivers/nxp/flexspi/nor/fspi.h
new file mode 100644
index 0000000..da2e269
--- /dev/null
+++ b/drivers/nxp/flexspi/nor/fspi.h
@@ -0,0 +1,385 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * FlexSpi Registers & Bits definition.
+ *
+ */
+
+#ifndef FSPI_H
+#define FSPI_H
+
+#ifndef __ASSEMBLER__
+#include <lib/mmio.h>
+
+#ifdef NXP_FSPI_BE
+#define fspi_in32(a)		bswap32(mmio_read_32((uintptr_t)(a)))
+#define fspi_out32(a, v)	mmio_write_32((uintptr_t)(a), bswap32(v))
+#elif defined(NXP_FSPI_LE)
+#define fspi_in32(a)		mmio_read_32((uintptr_t)(a))
+#define fspi_out32(a, v)	mmio_write_32((uintptr_t)(a), v)
+#else
+#error Please define FSPI register endianness
+#endif
+
+#endif
+
+/* All LE so not swap needed */
+#define FSPI_IPDATA_SWAP		0U
+#define FSPI_AHBDATA_SWAP		0U
+
+#define CONFIG_FSPI_FASTREAD		1U
+
+#define FSPI_BYTES_PER_KBYTES		0x400U
+#define FLASH_NUM			1U
+
+#define FSPI_READ_SEQ_ID		0U
+#define FSPI_WREN_SEQ_ID		1U
+#define FSPI_WRITE_SEQ_ID		2U
+#define FSPI_SE_SEQ_ID			3U
+#define FSPI_RDSR_SEQ_ID		4U
+#define FSPI_BE_SEQ_ID			5U
+#define FSPI_FASTREAD_SEQ_ID		6U
+#define FSPI_4K_SEQ_ID			7U
+
+/*
+ * LUT register layout:
+ *
+ *  ---------------------------------------------------
+ *  | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 |
+ *  ---------------------------------------------------
+ *
+ *    INSTR_SHIFT- 10, PAD_SHIFT - 8, OPRND_SHIFT -0
+ */
+#define FSPI_INSTR_OPRND0_SHIFT		0
+#define FSPI_INSTR_OPRND0(x)		(x << FSPI_INSTR_OPRND0_SHIFT)
+#define FSPI_INSTR_PAD0_SHIFT		8
+#define FSPI_INSTR_PAD0(x)		((x) << FSPI_INSTR_PAD0_SHIFT)
+#define FSPI_INSTR_OPCODE0_SHIFT	10
+#define FSPI_INSTR_OPCODE0(x)		((x) << FSPI_INSTR_OPCODE0_SHIFT)
+#define FSPI_INSTR_OPRND1_SHIFT		16
+#define FSPI_INSTR_OPRND1(x)		((x) << FSPI_INSTR_OPRND1_SHIFT)
+#define FSPI_INSTR_PAD1_SHIFT		24
+#define FSPI_INSTR_PAD1(x)		((x) << FSPI_INSTR_PAD1_SHIFT)
+#define FSPI_INSTR_OPCODE1_SHIFT	26
+#define FSPI_INSTR_OPCODE1(x)		((x) << FSPI_INSTR_OPCODE1_SHIFT)
+
+/* Instruction set for the LUT register. */
+#define LUT_STOP			0x00
+#define LUT_CMD				0x01
+#define LUT_ADDR			0x02
+#define LUT_CADDR_SDR			0x03
+#define LUT_MODE			0x04
+#define LUT_MODE2			0x05
+#define LUT_MODE4			0x06
+#define LUT_MODE8			0x07
+#define LUT_NXP_WRITE			0x08
+#define LUT_NXP_READ			0x09
+
+#define LUT_LEARN_SDR			0x0A
+#define LUT_DATSZ_SDR			0x0B
+#define LUT_DUMMY			0x0C
+#define LUT_DUMMY_RWDS_SDR		0x0D
+#define LUT_JMP_ON_CS			0x1F
+#define LUT_CMD_DDR			0x21
+#define LUT_ADDR_DDR			0x22
+#define LUT_CADDR_DDR			0x23
+#define LUT_MODE_DDR			0x24
+#define LUT_MODE2_DDR			0x25
+#define LUT_MODE4_DDR			0x26
+#define LUT_MODE8_DDR			0x27
+#define LUT_WRITE_DDR			0x28
+#define LUT_READ_DDR			0x29
+#define LUT_LEARN_DDR			0x2A
+#define LUT_DATSZ_DDR			0x2B
+#define LUT_DUMMY_DDR			0x2C
+#define LUT_DUMMY_RWDS_DDR		0x2D
+
+#define FSPI_NOR_CMD_READ		0x03
+#define FSPI_NOR_CMD_READ_4B		0x13
+#define FSPI_NOR_CMD_FASTREAD		0x0b
+#define FSPI_NOR_CMD_FASTREAD_4B	0x0c
+#define FSPI_NOR_CMD_PP			0x02
+#define FSPI_NOR_CMD_PP_4B		0x12
+#define FSPI_NOR_CMD_WREN		0x06
+#define FSPI_NOR_CMD_SE_64K		0xd8
+#define FSPI_NOR_CMD_SE_64K_4B		0xdc
+#define FSPI_NOR_CMD_SE_4K		0x20
+#define FSPI_NOR_CMD_SE_4K_4B		0x21
+#define FSPI_NOR_CMD_BE			0x60
+#define FSPI_NOR_CMD_RDSR		0x05
+#define FSPI_NOR_CMD_WREN_STOP		0x04
+
+#define FSPI_LUT_STOP			0x00
+#define FSPI_LUT_CMD			0x01
+#define FSPI_LUT_ADDR			0x02
+
+#define FSPI_LUT_PAD1			0
+#define FSPI_LUT_PAD2			1
+#define FSPI_LUT_PAD4			2
+#define FSPI_LUT_PAD8			3
+
+#define FSPI_LUT_ADDR24BIT		0x18
+#define FSPI_LUT_ADDR32BIT		0x20
+
+#define FSPI_LUT_WRITE			0x08
+#define FSPI_LUT_READ			0x09
+#define FSPI_DUMMY_SDR			0x0c
+
+/* TODO Check size if functional*/
+#define FSPI_RX_IPBUF_SIZE		0x200	/*  64*64 bits  */
+#define FSPI_TX_IPBUF_SIZE		0x400	/* 128*64 bits */
+
+#define FSPI_RX_MAX_AHBBUF_SIZE		0x800 /* 256 * 64bits */
+#define FSPI_TX_MAX_AHBBUF_SIZE		0x40  /* 8 * 64bits   */
+
+#define FSPI_LUTREG_OFFSET			0x200ul
+
+#define FSPI_MAX_TIMEOUT_AHBCMD		0xFFU
+#define FSPI_MAX_TIMEOUT_IPCMD		0xFF
+#define FSPI_SER_CLK_DIV		0x04
+#define FSPI_HSEN			0
+#define FSPI_ENDCFG_BE64		0x01
+#define FSPI_ENDCFG_BE32		0x03
+#define FSPI_ENDCFG_LE32		0x02
+#define FSPI_ENDCFG_LE64		0x0
+
+#define MASK_24BIT_ADDRESS		0x00ffffff
+#define MASK_32BIT_ADDRESS		0xffffffff
+
+/* Registers used by the driver */
+#define FSPI_MCR0			0x0ul
+#define FSPI_MCR0_AHB_TIMEOUT(x)	((x) << 24)
+#define FSPI_MCR0_IP_TIMEOUT(x)		((x) << 16)
+#define FSPI_MCR0_LEARN_EN		BIT(15)
+#define FSPI_MCR0_SCRFRUN_EN		BIT(14)
+#define FSPI_MCR0_OCTCOMB_EN		BIT(13)
+#define FSPI_MCR0_DOZE_EN		BIT(12)
+#define FSPI_MCR0_HSEN			BIT(11)
+#define FSPI_MCR0_SERCLKDIV		BIT(8)
+#define FSPI_MCR0_ATDF_EN		BIT(7)
+#define FSPI_MCR0_ARDF_EN		BIT(6)
+#define FSPI_MCR0_RXCLKSRC(x)		((x) << 4)
+#define FSPI_MCR0_END_CFG(x)		((x) << 2)
+#define FSPI_MCR0_MDIS			BIT(1)
+#define FSPI_MCR0_SWRST			BIT(0)
+
+#define FSPI_MCR0_AHBGRANTWAIT_SHIFT	24
+#define FSPI_MCR0_AHBGRANTWAIT_MASK	(0xFFU << FSPI_MCR0_AHBGRANTWAIT_SHIFT)
+#define FSPI_MCR0_IPGRANTWAIT_SHIFT	16
+#define FSPI_MCR0_IPGRANTWAIT_MASK	(0xFF << FSPI_MCR0_IPGRANTWAIT_SHIFT)
+#define FSPI_MCR0_HSEN_SHIFT		11
+#define FSPI_MCR0_HSEN_MASK		(1 << FSPI_MCR0_HSEN_SHIFT)
+#define FSPI_MCR0_SERCLKDIV_SHIFT	8
+#define FSPI_MCR0_SERCLKDIV_MASK	(7 << FSPI_MCR0_SERCLKDIV_SHIFT)
+#define FSPI_MCR0_ENDCFG_SHIFT		2
+#define FSPI_MCR0_ENDCFG_MASK		(3 << FSPI_MCR0_ENDCFG_SHIFT)
+#define FSPI_MCR0_RXCLKSRC_SHIFT	4
+#define FSPI_MCR0_RXCLKSRC_MASK		(3 << FSPI_MCR0_RXCLKSRC_SHIFT)
+
+#define FSPI_MCR1			0x04
+#define FSPI_MCR1_SEQ_TIMEOUT(x)	((x) << 16)
+#define FSPI_MCR1_AHB_TIMEOUT(x)	(x)
+
+#define FSPI_MCR2			0x08
+#define FSPI_MCR2_IDLE_WAIT(x)		((x) << 24)
+#define FSPI_MCR2_SAMEDEVICEEN		BIT(15)
+#define FSPI_MCR2_CLRLRPHS		BIT(14)
+#define FSPI_MCR2_ABRDATSZ		BIT(8)
+#define FSPI_MCR2_ABRLEARN		BIT(7)
+#define FSPI_MCR2_ABR_READ		BIT(6)
+#define FSPI_MCR2_ABRWRITE		BIT(5)
+#define FSPI_MCR2_ABRDUMMY		BIT(4)
+#define FSPI_MCR2_ABR_MODE		BIT(3)
+#define FSPI_MCR2_ABRCADDR		BIT(2)
+#define FSPI_MCR2_ABRRADDR		BIT(1)
+#define FSPI_MCR2_ABR_CMD		BIT(0)
+
+#define FSPI_AHBCR			0x0c
+#define FSPI_AHBCR_RDADDROPT		BIT(6)
+#define FSPI_AHBCR_PREF_EN		BIT(5)
+#define FSPI_AHBCR_BUFF_EN		BIT(4)
+#define FSPI_AHBCR_CACH_EN		BIT(3)
+#define FSPI_AHBCR_CLRTXBUF		BIT(2)
+#define FSPI_AHBCR_CLRRXBUF		BIT(1)
+#define FSPI_AHBCR_PAR_EN		BIT(0)
+
+#define FSPI_INTEN			0x10
+#define FSPI_INTEN_SCLKSBWR		BIT(9)
+#define FSPI_INTEN_SCLKSBRD		BIT(8)
+#define FSPI_INTEN_DATALRNFL		BIT(7)
+#define FSPI_INTEN_IPTXWE		BIT(6)
+#define FSPI_INTEN_IPRXWA		BIT(5)
+#define FSPI_INTEN_AHBCMDERR		BIT(4)
+#define FSPI_INTEN_IPCMDERR		BIT(3)
+#define FSPI_INTEN_AHBCMDGE		BIT(2)
+#define FSPI_INTEN_IPCMDGE		BIT(1)
+#define FSPI_INTEN_IPCMDDONE		BIT(0)
+
+#define FSPI_INTR			0x14
+#define FSPI_INTR_SCLKSBWR		BIT(9)
+#define FSPI_INTR_SCLKSBRD		BIT(8)
+#define FSPI_INTR_DATALRNFL		BIT(7)
+#define FSPI_INTR_IPTXWE		BIT(6)
+#define FSPI_INTR_IPRXWA		BIT(5)
+#define FSPI_INTR_AHBCMDERR		BIT(4)
+#define FSPI_INTR_IPCMDERR		BIT(3)
+#define FSPI_INTR_AHBCMDGE		BIT(2)
+#define FSPI_INTR_IPCMDGE		BIT(1)
+#define FSPI_INTR_IPCMDDONE		BIT(0)
+
+#define FSPI_LUTKEY			0x18
+#define FSPI_LUTKEY_VALUE		0x5AF05AF0
+
+#define FSPI_LCKCR			0x1C
+
+#define FSPI_LCKER_LOCK			0x1
+#define FSPI_LCKER_UNLOCK		0x2
+
+#define FSPI_BUFXCR_INVALID_MSTRID	0xE
+#define FSPI_AHBRX_BUF0CR0		0x20
+#define FSPI_AHBRX_BUF1CR0		0x24
+#define FSPI_AHBRX_BUF2CR0		0x28
+#define FSPI_AHBRX_BUF3CR0		0x2C
+#define FSPI_AHBRX_BUF4CR0		0x30
+#define FSPI_AHBRX_BUF5CR0		0x34
+#define FSPI_AHBRX_BUF6CR0		0x38
+#define FSPI_AHBRX_BUF7CR0		0x3C
+
+#define FSPI_AHBRXBUF0CR7_PREF		BIT(31)
+
+#define FSPI_AHBRX_BUF0CR1		0x40
+#define FSPI_AHBRX_BUF1CR1		0x44
+#define FSPI_AHBRX_BUF2CR1		0x48
+#define FSPI_AHBRX_BUF3CR1		0x4C
+#define FSPI_AHBRX_BUF4CR1		0x50
+#define FSPI_AHBRX_BUF5CR1		0x54
+#define FSPI_AHBRX_BUF6CR1		0x58
+#define FSPI_AHBRX_BUF7CR1		0x5C
+
+#define FSPI_FLSHA1CR0			0x60
+#define FSPI_FLSHA2CR0			0x64
+#define FSPI_FLSHB1CR0			0x68
+#define FSPI_FLSHB2CR0			0x6C
+#define FSPI_FLSHXCR0_SZ_KB		10
+#define FSPI_FLSHXCR0_SZ(x)		((x) >> FSPI_FLSHXCR0_SZ_KB)
+
+#define FSPI_FLSHA1CR1			0x70
+#define FSPI_FLSHA2CR1			0x74
+#define FSPI_FLSHB1CR1			0x78
+#define FSPI_FLSHB2CR1			0x7C
+#define FSPI_FLSHXCR1_CSINTR(x)		((x) << 16)
+#define FSPI_FLSHXCR1_CAS(x)		((x) << 11)
+#define FSPI_FLSHXCR1_WA		BIT(10)
+#define FSPI_FLSHXCR1_TCSH(x)		((x) << 5)
+#define FSPI_FLSHXCR1_TCSS(x)		(x)
+
+#define FSPI_FLSHXCR1_TCSH_SHIFT	5
+#define FSPI_FLSHXCR1_TCSH_MASK		(0x1F << FSPI_FLSHXCR1_TCSH_SHIFT)
+#define FSPI_FLSHXCR1_TCSS_SHIFT	0
+#define FSPI_FLSHXCR1_TCSS_MASK		(0x1F << FSPI_FLSHXCR1_TCSS_SHIFT)
+
+#define FSPI_FLSHA1CR2			0x80
+#define FSPI_FLSHA2CR2			0x84
+#define FSPI_FLSHB1CR2			0x88
+#define FSPI_FLSHB2CR2			0x8C
+#define FSPI_FLSHXCR2_CLRINSP		BIT(24)
+#define FSPI_FLSHXCR2_AWRWAIT		BIT(16)
+#define FSPI_FLSHXCR2_AWRSEQN_SHIFT	13
+#define FSPI_FLSHXCR2_AWRSEQI_SHIFT	8
+#define FSPI_FLSHXCR2_ARDSEQN_SHIFT	5
+#define FSPI_FLSHXCR2_ARDSEQI_SHIFT	0
+
+#define FSPI_IPCR0			0xA0
+
+#define FSPI_IPCR1			0xA4
+#define FSPI_IPCR1_IPAREN		BIT(31)
+#define FSPI_IPCR1_SEQNUM_SHIFT		24
+#define FSPI_IPCR1_SEQID_SHIFT		16
+#define FSPI_IPCR1_IDATSZ(x)		(x)
+
+#define FSPI_IPCMD			0xB0
+#define FSPI_IPCMD_TRG			BIT(0)
+
+
+/* IP Command Register */
+#define FSPI_IPCMD_TRG_SHIFT		0
+#define FSPI_IPCMD_TRG_MASK		(1 << FSPI_IPCMD_TRG_SHIFT)
+
+#define FSPI_INTR_IPRXWA_SHIFT		5
+#define FSPI_INTR_IPRXWA_MASK		(1 << FSPI_INTR_IPRXWA_SHIFT)
+
+#define FSPI_INTR_IPCMDDONE_SHIFT	0
+#define FSPI_INTR_IPCMDDONE_MASK	(1 << FSPI_INTR_IPCMDDONE_SHIFT)
+
+#define FSPI_INTR_IPTXWE_SHIFT		6
+#define FSPI_INTR_IPTXWE_MASK		(1 << FSPI_INTR_IPTXWE_SHIFT)
+
+#define FSPI_IPTXFSTS_FILL_SHIFT	0
+#define FSPI_IPTXFSTS_FILL_MASK		(0xFF << FSPI_IPTXFSTS_FILL_SHIFT)
+
+#define FSPI_IPCR1_ISEQID_SHIFT		16
+#define FSPI_IPCR1_ISEQID_MASK		(0x1F << FSPI_IPCR1_ISEQID_SHIFT)
+
+#define FSPI_IPRXFSTS_FILL_SHIFT	0
+#define FSPI_IPRXFSTS_FILL_MASK		(0xFF << FSPI_IPRXFSTS_FILL_SHIFT)
+
+#define FSPI_DLPR			0xB4
+
+#define FSPI_IPRXFCR			0xB8
+#define FSPI_IPRXFCR_CLR		BIT(0)
+#define FSPI_IPRXFCR_DMA_EN		BIT(1)
+#define FSPI_IPRXFCR_WMRK(x)		((x) << 2)
+
+#define FSPI_IPTXFCR			0xBC
+#define FSPI_IPTXFCR_CLR		BIT(0)
+#define FSPI_IPTXFCR_DMA_EN		BIT(1)
+#define FSPI_IPTXFCR_WMRK(x)		((x) << 2)
+
+#define FSPI_DLLACR			0xC0
+#define FSPI_DLLACR_OVRDEN		BIT(8)
+
+#define FSPI_DLLBCR			0xC4
+#define FSPI_DLLBCR_OVRDEN		BIT(8)
+
+#define FSPI_STS0			0xE0
+#define FSPI_STS0_DLPHB(x)		((x) << 8)
+#define FSPI_STS0_DLPHA(x)		((x) << 4)
+#define FSPI_STS0_CMD_SRC(x)		((x) << 2)
+#define FSPI_STS0_ARB_IDLE		BIT(1)
+#define FSPI_STS0_SEQ_IDLE		BIT(0)
+
+#define FSPI_STS1			0xE4
+#define FSPI_STS1_IP_ERRCD(x)		((x) << 24)
+#define FSPI_STS1_IP_ERRID(x)		((x) << 16)
+#define FSPI_STS1_AHB_ERRCD(x)		((x) << 8)
+#define FSPI_STS1_AHB_ERRID(x)		(x)
+
+#define FSPI_AHBSPNST			0xEC
+#define FSPI_AHBSPNST_DATLFT(x)		((x) << 16)
+#define FSPI_AHBSPNST_BUFID(x)		((x) << 1)
+#define FSPI_AHBSPNST_ACTIVE		BIT(0)
+
+#define FSPI_IPRXFSTS			0xF0
+#define FSPI_IPRXFSTS_RDCNTR(x)		((x) << 16)
+#define FSPI_IPRXFSTS_FILL(x)		(x)
+
+#define FSPI_IPTXFSTS			0xF4
+#define FSPI_IPTXFSTS_WRCNTR(x)		((x) << 16)
+#define FSPI_IPTXFSTS_FILL(x)		(x)
+
+#define FSPI_NOR_SR_WIP_SHIFT		(0)
+#define FSPI_NOR_SR_WIP_MASK		(1 << FSPI_NOR_SR_WIP_SHIFT)
+
+#define FSPI_RFDR			0x100
+#define FSPI_TFDR			0x180
+
+#define FSPI_LUT_BASE			0x200
+#define FSPI_LUT_OFFSET			(SEQID_LUT * 4 * 4)
+#define FSPI_LUT_REG(idx) \
+	(FSPI_LUT_BASE + FSPI_LUT_OFFSET + (idx) * 4)
+
+/* register map end */
+
+#endif
diff --git a/drivers/nxp/flexspi/nor/test_fspi.c b/drivers/nxp/flexspi/nor/test_fspi.c
new file mode 100644
index 0000000..c36c5b8
--- /dev/null
+++ b/drivers/nxp/flexspi/nor/test_fspi.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <stdint.h>
+#include <stdio.h>
+
+#include <common/debug.h>
+#include <flash_info.h>
+#include "fspi.h"
+#include <fspi_api.h>
+
+/*
+ * The macros are defined to be used as test vector for testing fspi.
+ */
+#define	SIZE_BUFFER			0x250
+
+/*
+ * You may choose fspi_swap based on core endianness and flexspi IP/AHB
+ * buffer endianness set in MCR.
+ */
+#define fspi_swap32(A)			(A)
+
+void fspi_test(uint32_t fspi_test_addr, uint32_t size, int extra)
+{
+	uint32_t buffer[SIZE_BUFFER];
+	uint32_t count = 1;
+	uint32_t failed, i;
+
+	NOTICE("-------------------------- %d----------------------------------\n", count++);
+	INFO("Sector Erase size: 0x%08x, size: %d\n", F_SECTOR_ERASE_SZ, size);
+	/* Test Sector Erase */
+	xspi_sector_erase(fspi_test_addr - fspi_test_addr % F_SECTOR_ERASE_SZ,
+			  F_SECTOR_ERASE_SZ);
+
+	/* Test Erased data using IP read */
+	xspi_ip_read((fspi_test_addr), buffer, size * 4);
+
+	failed = 0;
+	for (i = 0; i < size; i++)
+		if (fspi_swap32(0xffffffff) != buffer[i]) {
+			failed = 1;
+			break;
+		}
+
+	if (failed == 0) {
+		NOTICE("[%d]: Success Erase: data in buffer[%d] 0x%08x\n", __LINE__, i-3, buffer[i-3]);
+	} else {
+		ERROR("Erase: Failed  -->xxx with buffer[%d]=0x%08x\n", i, buffer[i]);
+	}
+
+	for (i = 0; i < SIZE_BUFFER; i++)
+		buffer[i] = 0x12345678;
+
+	/* Write data from buffer to flash */
+	xspi_write(fspi_test_addr, (void *)buffer, (size * 4 + extra));
+	/* Check written data using IP read */
+	xspi_ip_read(fspi_test_addr, buffer, (size * 4 + extra));
+	failed = 0;
+	for (i = 0; i < size; i++)
+		if (fspi_swap32(0x12345678) != buffer[i]) {
+			failed = 1;
+			break;
+		}
+
+	if (failed == 0) {
+		NOTICE("[%d]: Success IpWrite with IP READ in buffer[%d] 0x%08x\n", __LINE__, i-3, buffer[i-3]);
+	} else {
+		ERROR("Write: Failed  -->xxxx with IP READ in buffer[%d]=0x%08x\n", i, buffer[i]);
+		return;
+	}
+
+	/* xspi_read may use AHB read */
+	xspi_read((fspi_test_addr), buffer, (size * 4 + extra));
+	failed = 0;
+	for (i = 0; i < size; i++)
+		if (fspi_swap32(0x12345678) != buffer[i]) {
+			failed = 1;
+			break;
+		}
+
+	if (failed == 0) {
+		NOTICE("[%d]: Success IpWrite with AHB OR IP READ on buffer[%d] 0x%08x\n", __LINE__, i-3, buffer[i-3]);
+	} else {
+		ERROR("Write: Failed  -->xxxx with AHB READ on buffer[%d]=0x%08x\n", i, buffer[i]);
+		return;
+	}
+}
diff --git a/include/drivers/nxp/flexspi/flash_info.h b/include/drivers/nxp/flexspi/flash_info.h
new file mode 100644
index 0000000..6df79c9
--- /dev/null
+++ b/include/drivers/nxp/flexspi/flash_info.h
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ *  Copyright 2020 NXP
+ */
+
+/**
+ * @Flash info
+ *
+ */
+#ifndef FLASH_INFO_H
+#define FLASH_INFO_H
+
+#define SZ_16M_BYTES			0x1000000U
+
+#if defined(CONFIG_MT25QU512A)
+#define F_SECTOR_64K			0x10000U
+#define F_PAGE_256			0x100U
+#define F_SECTOR_4K			0x1000U
+#define F_FLASH_SIZE_BYTES		0x4000000U
+#define F_SECTOR_ERASE_SZ		F_SECTOR_64K
+#ifdef CONFIG_FSPI_4K_ERASE
+#define F_SECTOR_ERASE_SZ		F_SECTOR_4K
+#endif
+
+#elif defined(CONFIG_MX25U25645G)
+#define F_SECTOR_64K			0x10000U
+#define F_PAGE_256			0x100U
+#define F_SECTOR_4K			0x1000U
+#define F_FLASH_SIZE_BYTES		0x2000000U
+#define F_SECTOR_ERASE_SZ		F_SECTOR_64K
+#ifdef CONFIG_FSPI_4K_ERASE
+#define F_SECTOR_ERASE_SZ		F_SECTOR_4K
+#endif
+
+#elif defined(CONFIG_MX25U51245G)
+#define F_SECTOR_64K			0x10000U
+#define F_PAGE_256			0x100U
+#define F_SECTOR_4K			0x1000U
+#define F_FLASH_SIZE_BYTES		0x4000000U
+#define F_SECTOR_ERASE_SZ		F_SECTOR_64K
+#ifdef CONFIG_FSPI_4K_ERASE
+#define F_SECTOR_ERASE_SZ		F_SECTOR_4K
+#endif
+
+#elif defined(CONFIG_MT35XU512A)
+#define F_SECTOR_128K			0x20000U
+#define F_SECTOR_32K			0x8000U
+#define F_PAGE_256			0x100U
+#define F_SECTOR_4K			0x1000U
+#define F_FLASH_SIZE_BYTES		0x4000000U
+#define F_SECTOR_ERASE_SZ		F_SECTOR_128K
+#ifdef CONFIG_FSPI_4K_ERASE
+#define F_SECTOR_ERASE_SZ		F_SECTOR_4K
+#endif
+
+#ifdef NXP_WARM_BOOT
+#define FLASH_WR_COMP_WAIT_BY_NOP_COUNT	0x20000
+#endif
+
+#endif
+#endif /* FLASH_INFO_H */
diff --git a/include/drivers/nxp/flexspi/fspi_api.h b/include/drivers/nxp/flexspi/fspi_api.h
new file mode 100644
index 0000000..d0de543
--- /dev/null
+++ b/include/drivers/nxp/flexspi/fspi_api.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+
+/*!
+ * @file	fspi_api.h
+ * @brief	This file contains the FlexSPI/FSPI API to communicate
+ *		to attached Slave device.
+ * @addtogroup	FSPI_API
+ * @{
+ */
+
+#ifndef FSPI_API_H
+#define FSPI_API_H
+
+#if DEBUG_FLEXSPI
+#define SZ_57M			0x3900000u
+#endif
+
+/*!
+ * Basic set of APIs.
+ */
+
+/*!
+ * @details AHB read/IP Read, decision to be internal to API
+ * Minimum Read size = 1Byte
+ * @param[in] src_off source offset from where data to read from flash
+ * @param[out] des Destination location where data needs to be copied
+ * @param[in] len length in Bytes,where 1-word=4-bytes/32-bits
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int xspi_read(uint32_t src_off, uint32_t *des, uint32_t len);
+/*!
+ * @details Sector erase, Minimum size
+ * 256KB(0x40000)/128KB(0x20000)/64K(0x10000)/4K(0x1000)
+ * depending upon flash, Calls xspi_wren() internally
+ * @param[out] erase_offset Destination erase location on flash which
+ * has to be erased, needs to be multiple of 0x40000/0x20000/0x10000
+ * @param[in] erase_len length in bytes in Hex like 0x100000 for 1MB, minimum
+ * erase size is 1 sector(0x40000/0x20000/0x10000)
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int xspi_sector_erase(uint32_t erase_offset, uint32_t erase_len);
+/*!
+ * @details IP write, For writing data to flash, calls xspi_wren() internally.
+ * Single/multiple page write can start @any offset, but performance will be low
+ * due to ERRATA
+ * @param[out] dst_off Destination location on flash where data needs to
+ * be written
+ * @param[in] src source offset from where data to be read
+ * @param[in] len length in bytes,where 1-word=4-bytes/32-bits
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int xspi_write(uint32_t dst_off, void *src, uint32_t len);
+/*!
+ * @details fspi_init, Init function.
+ * @param[in] uint32_t base_reg_addr
+ * @param[in] uint32_t flash_start_addr
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int fspi_init(uint32_t base_reg_addr, uint32_t flash_start_addr);
+/*!
+ * @details is_flash_busy, Check if any erase or write or lock is
+ * pending on flash/slave
+ * @param[in] void
+ *
+ * @return TRUE/FLASE
+ */
+bool is_flash_busy(void);
+
+/*!
+ * Advanced set of APIs.
+ */
+
+/*!
+ * @details Write enable, to be used by advance users only.
+ * Step 1 for sending write commands to flash.
+ * @param[in] dst_off destination offset where data will be written
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int xspi_wren(uint32_t dst_off);
+/*!
+ * @details AHB read, meaning direct memory mapped access to flash,
+ * Minimum Read size = 1Byte
+ * @param[in] src_off source offset from where data to read from flash,
+ * needs to be word aligned
+ * @param[out] des Destination location where data needs to be copied
+ * @param[in] len length in Bytes,where 1-word=4-bytes/32-bits
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int xspi_ahb_read(uint32_t src_off, uint32_t *des, uint32_t len);
+/*!
+ * @details IP read, READ via RX buffer from flash, minimum READ size = 1Byte
+ * @param[in] src_off source offset from where data to be read from flash
+ * @param[out] des Destination location where data needs to be copied
+ * @param[in] len length in Bytes,where 1-word=4-bytes/32-bits
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int xspi_ip_read(uint32_t src_off, uint32_t *des, uint32_t len);
+/*!
+ * @details CHIP erase, Erase complete chip in one go
+ *
+ * @return XSPI_SUCCESS or error code
+ */
+int xspi_bulk_erase(void);
+
+/*!
+ * Add test cases to confirm flash read/erase/write functionality.
+ */
+void fspi_test(uint32_t fspi_test_addr, uint32_t size, int extra);
+#endif /* FSPI_API_H */
diff --git a/include/drivers/nxp/flexspi/xspi_error_codes.h b/include/drivers/nxp/flexspi/xspi_error_codes.h
new file mode 100644
index 0000000..18b31eb
--- /dev/null
+++ b/include/drivers/nxp/flexspi/xspi_error_codes.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+/* error codes */
+#ifndef XSPI_ERROR_CODES_H
+#define XSPI_ERROR_CODES_H
+
+#include <errno.h>
+
+typedef enum {
+	XSPI_SUCCESS                     = 0,
+	XSPI_READ_FAIL			 = ELAST + 1,
+	XSPI_ERASE_FAIL,
+	XSPI_IP_READ_FAIL,
+	XSPI_AHB_READ_FAIL,
+	XSPI_IP_WRITE_FAIL,
+	XSPI_AHB_WRITE_FAIL,
+	XSPI_BLOCK_TIMEOUT,
+	XSPI_UNALIGN_ADDR,
+	XSPI_UNALIGN_SIZE,
+} XSPI_STATUS_CODES;
+#undef ELAST
+#define ELAST XSPI_STATUS_CODES.XSPI_UNALIGN_SIZE
+#endif