Upgrade libfdt source files
This version corresponds to the following commit <7be250b>
libfdt: Correct condition for reordering blocks
Also, updated the Juno romlib jumptable with fdt APIs.
Change-Id: Ib6d28c1aea81c2144a263958f0792cc4daea7a1f
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
diff --git a/lib/libfdt/libfdt_internal.h b/lib/libfdt/libfdt_internal.h
index 7681e19..d4e0bd4 100644
--- a/lib/libfdt/libfdt_internal.h
+++ b/lib/libfdt/libfdt_internal.h
@@ -1,65 +1,21 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) */
#ifndef LIBFDT_INTERNAL_H
#define LIBFDT_INTERNAL_H
/*
* libfdt - Flat Device Tree manipulation
* Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <fdt.h>
#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE))
-#define FDT_CHECK_HEADER(fdt) \
- { \
- int err_; \
- if ((err_ = fdt_check_header(fdt)) != 0) \
- return err_; \
+int32_t fdt_ro_probe_(const void *fdt);
+#define FDT_RO_PROBE(fdt) \
+ { \
+ int32_t totalsize_; \
+ if ((totalsize_ = fdt_ro_probe_(fdt)) < 0) \
+ return totalsize_; \
}
int fdt_check_node_offset_(const void *fdt, int offset);
@@ -92,4 +48,126 @@
#define FDT_SW_MAGIC (~FDT_MAGIC)
+/**********************************************************************/
+/* Checking controls */
+/**********************************************************************/
+
+#ifndef FDT_ASSUME_MASK
+#define FDT_ASSUME_MASK 0
+#endif
+
+/*
+ * Defines assumptions which can be enabled. Each of these can be enabled
+ * individually. For maximum safety, don't enable any assumptions!
+ *
+ * For minimal code size and no safety, use ASSUME_PERFECT at your own risk.
+ * You should have another method of validating the device tree, such as a
+ * signature or hash check before using libfdt.
+ *
+ * For situations where security is not a concern it may be safe to enable
+ * ASSUME_SANE.
+ */
+enum {
+ /*
+ * This does essentially no checks. Only the latest device-tree
+ * version is correctly handled. Inconsistencies or errors in the device
+ * tree may cause undefined behaviour or crashes. Invalid parameters
+ * passed to libfdt may do the same.
+ *
+ * If an error occurs when modifying the tree it may leave the tree in
+ * an intermediate (but valid) state. As an example, adding a property
+ * where there is insufficient space may result in the property name
+ * being added to the string table even though the property itself is
+ * not added to the struct section.
+ *
+ * Only use this if you have a fully validated device tree with
+ * the latest supported version and wish to minimise code size.
+ */
+ ASSUME_PERFECT = 0xff,
+
+ /*
+ * This assumes that the device tree is sane. i.e. header metadata
+ * and basic hierarchy are correct.
+ *
+ * With this assumption enabled, normal device trees produced by libfdt
+ * and the compiler should be handled safely. Malicious device trees and
+ * complete garbage may cause libfdt to behave badly or crash. Truncated
+ * device trees (e.g. those only partially loaded) can also cause
+ * problems.
+ *
+ * Note: Only checks that relate exclusively to the device tree itself
+ * (not the parameters passed to libfdt) are disabled by this
+ * assumption. This includes checking headers, tags and the like.
+ */
+ ASSUME_VALID_DTB = 1 << 0,
+
+ /*
+ * This builds on ASSUME_VALID_DTB and further assumes that libfdt
+ * functions are called with valid parameters, i.e. not trigger
+ * FDT_ERR_BADOFFSET or offsets that are out of bounds. It disables any
+ * extensive checking of parameters and the device tree, making various
+ * assumptions about correctness.
+ *
+ * It doesn't make sense to enable this assumption unless
+ * ASSUME_VALID_DTB is also enabled.
+ */
+ ASSUME_VALID_INPUT = 1 << 1,
+
+ /*
+ * This disables checks for device-tree version and removes all code
+ * which handles older versions.
+ *
+ * Only enable this if you know you have a device tree with the latest
+ * version.
+ */
+ ASSUME_LATEST = 1 << 2,
+
+ /*
+ * This assumes that it is OK for a failed addition to the device tree,
+ * due to lack of space or some other problem, to skip any rollback
+ * steps (such as dropping the property name from the string table).
+ * This is safe to enable in most circumstances, even though it may
+ * leave the tree in a sub-optimal state.
+ */
+ ASSUME_NO_ROLLBACK = 1 << 3,
+
+ /*
+ * This assumes that the device tree components appear in a 'convenient'
+ * order, i.e. the memory reservation block first, then the structure
+ * block and finally the string block.
+ *
+ * This order is not specified by the device-tree specification,
+ * but is expected by libfdt. The device-tree compiler always created
+ * device trees with this order.
+ *
+ * This assumption disables a check in fdt_open_into() and removes the
+ * ability to fix the problem there. This is safe if you know that the
+ * device tree is correctly ordered. See fdt_blocks_misordered_().
+ */
+ ASSUME_LIBFDT_ORDER = 1 << 4,
+
+ /*
+ * This assumes that libfdt itself does not have any internal bugs. It
+ * drops certain checks that should never be needed unless libfdt has an
+ * undiscovered bug.
+ *
+ * This can generally be considered safe to enable.
+ */
+ ASSUME_LIBFDT_FLAWLESS = 1 << 5,
+};
+
+/**
+ * can_assume_() - check if a particular assumption is enabled
+ *
+ * @mask: Mask to check (ASSUME_...)
+ * @return true if that assumption is enabled, else false
+ */
+static inline bool can_assume_(int mask)
+{
+ return FDT_ASSUME_MASK & mask;
+}
+
+/** helper macros for checking assumptions */
+#define can_assume(_assume) can_assume_(ASSUME_ ## _assume)
+
#endif /* LIBFDT_INTERNAL_H */