Merge changes from topic "od/ns-interrupts" into integration
* changes:
spmd: add FFA_INTERRUPT forwarding
doc: spm: update messaging method field
diff --git a/docs/getting_started/porting-guide.rst b/docs/getting_started/porting-guide.rst
index be3f0bb..906daf8 100644
--- a/docs/getting_started/porting-guide.rst
+++ b/docs/getting_started/porting-guide.rst
@@ -1742,9 +1742,9 @@
which is list of executable images following BL31,
arg1 - Points to load address of SOC_FW_CONFIG if present
- except in case of Arm FVP platform.
+ except in case of Arm FVP and Juno platform.
- In case of Arm FVP platform, Points to load address
+ In case of Arm FVP and Juno platform, points to load address
of FW_CONFIG.
arg2 - Points to load address of HW_CONFIG if present
diff --git a/docs/plat/arm/arm-build-options.rst b/docs/plat/arm/arm-build-options.rst
index a1d2313..2aa9738 100644
--- a/docs/plat/arm/arm-build-options.rst
+++ b/docs/plat/arm/arm-build-options.rst
@@ -91,6 +91,12 @@
platforms. If this option is specified, then the path to the CryptoCell
SBROM library must be specified via ``CCSBROM_LIB_PATH`` flag.
+- ``ARM_ETHOSN_NPU_DRIVER``: boolean option to enable a SiP service that can
+ configure an Arm Ethos-N NPU. To use this service the target platform's
+ ``HW_CONFIG`` must include the device tree nodes for the NPU. Currently, only
+ the Arm Juno platform has this included in its ``HW_CONFIG`` and the platform
+ only loads the ``HW_CONFIG`` in AArch64 builds. Default is 0.
+
- ``ARM_SPMC_MANIFEST_DTS`` : path to an alternate manifest file used as the
SPMC Core manifest. Valid when ``SPD=spmd`` is selected.
@@ -128,4 +134,4 @@
--------------
-*Copyright (c) 2019-2020, Arm Limited. All rights reserved.*
+*Copyright (c) 2019-2021, Arm Limited. All rights reserved.*
diff --git a/docs/plat/marvell/armada/build.rst b/docs/plat/marvell/armada/build.rst
index e55ce3c..c74ff7a 100644
--- a/docs/plat/marvell/armada/build.rst
+++ b/docs/plat/marvell/armada/build.rst
@@ -26,7 +26,7 @@
*u-boot.bin* should be used and not *u-boot-spl.bin*
-Set MSS/SCP image path (mandatory only for A7K/8K/CN913x)
+Set MSS/SCP image path (mandatory only for A7K/8K/CN913x when MSS_SUPPORT=1)
.. code:: shell
@@ -219,6 +219,16 @@
binary and sys-init code from the WTP directory which sets DDR and CPU
clocks according to DDR_TOPOLOGY and CLOCKSPRESET options.
+ CZ.NIC as part of Turris project released free and open source WTMI
+ application firmware ``wtmi_app.bin`` for all Armada 3720 devices.
+ This firmware includes additional features like access to Hardware
+ Random Number Generator of Armada 3720 SoC which original Marvell's
+ ``fuse.bin`` image does not have.
+
+ CZ.NIC's Armada 3720 Secure Firmware is available at website:
+
+ https://gitlab.nic.cz/turris/mox-boot-builder/
+
- WTP
For Armada37x0 only, use this parameter to point to wtptools source code
@@ -274,21 +284,25 @@
CROSS_COMPILE=aarch64-linux-gnu- mrvl_bootimage
Here is full example how to build production release of Marvell firmware image (concatenated
-binary of Marvell secure firmware, TF-A and U-Boot) for EspressoBin board (PLAT=a3700) with
-1GHz CPU (CLOCKSPRESET=CPU_1000_DDR_800) and 1GB DDR4 RAM (DDR_TOPOLOGY=5):
+binary of Marvell's A3720 sys-init, CZ.NIC's Armada 3720 Secure Firmware, TF-A and U-Boot) for
+EspressoBin board (PLAT=a3700) with 1GHz CPU (CLOCKSPRESET=CPU_1000_DDR_800) and
+1GB DDR4 RAM (DDR_TOPOLOGY=5):
.. code:: shell
- > git clone https://review.trustedfirmware.org/TF-A/trusted-firmware-a
- > git clone https://gitlab.denx.de/u-boot/u-boot.git
+ > git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
+ > git clone https://source.denx.de/u-boot/u-boot.git
> git clone https://github.com/weidai11/cryptopp.git
- > git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git -b master
- > git clone https://github.com/MarvellEmbeddedProcessors/A3700-utils-marvell.git -b master
+ > git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
+ > git clone https://github.com/MarvellEmbeddedProcessors/A3700-utils-marvell.git
+ > git clone https://gitlab.nic.cz/turris/mox-boot-builder.git
> make -C u-boot CROSS_COMPILE=aarch64-linux-gnu- mvebu_espressobin-88f3720_defconfig u-boot.bin
+ > make -C mox-boot-builder CROSS_CM3=arm-linux-gnueabi- wtmi_app.bin
> make -C trusted-firmware-a CROSS_COMPILE=aarch64-linux-gnu- CROSS_CM3=arm-linux-gnueabi- \
USE_COHERENT_MEM=0 PLAT=a3700 CLOCKSPRESET=CPU_1000_DDR_800 DDR_TOPOLOGY=5 \
- MV_DDR_PATH=$PWD/mv-ddr-marvell/ WTP=$PWD/A3700-utils-marvell/ CRYPTOPP_PATH=$PWD/cryptopp/ \
- BL33=$PWD/u-boot/u-boot.bin mrvl_flash
+ MV_DDR_PATH=$PWD/mv-ddr-marvell/ WTP=$PWD/A3700-utils-marvell/ \
+ CRYPTOPP_PATH=$PWD/cryptopp/ BL33=$PWD/u-boot/u-boot.bin \
+ WTMI_IMG=$PWD/mox-boot-builder/wtmi_app.bin FIP_ALIGN=0x100 mrvl_flash
Produced Marvell firmware flash image: ``trusted-firmware-a/build/a3700/release/flash-image.bin``
diff --git a/drivers/arm/ethosn/ethosn_smc.c b/drivers/arm/ethosn/ethosn_smc.c
new file mode 100644
index 0000000..299d07c
--- /dev/null
+++ b/drivers/arm/ethosn/ethosn_smc.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#include <common/debug.h>
+#include <common/runtime_svc.h>
+#include <drivers/arm/ethosn.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+#include <plat/arm/common/fconf_ethosn_getter.h>
+
+/* Arm Ethos-N NPU (NPU) status */
+#define ETHOSN_STATUS \
+ FCONF_GET_PROPERTY(hw_config, ethosn_config, status)
+
+/* Number of NPU cores available */
+#define ETHOSN_NUM_CORES \
+ FCONF_GET_PROPERTY(hw_config, ethosn_config, num_cores)
+
+/* Address to an NPU core */
+#define ETHOSN_CORE_ADDR(core_idx) \
+ FCONF_GET_PROPERTY(hw_config, ethosn_core_addr, core_idx)
+
+/* NPU core sec registry address */
+#define ETHOSN_CORE_SEC_REG(core_addr, reg_offset) \
+ (core_addr + reg_offset)
+
+/* Reset timeout in us */
+#define ETHOSN_RESET_TIMEOUT_US U(10 * 1000 * 1000)
+#define ETHOSN_RESET_WAIT_US U(1)
+
+#define SEC_DEL_REG U(0x0004)
+#define SEC_DEL_VAL U(0x81C)
+#define SEC_DEL_EXCC_MASK U(0x20)
+
+#define SEC_SECCTLR_REG U(0x0010)
+#define SEC_SECCTLR_VAL U(0x3)
+
+#define SEC_DEL_MMUSID_REG U(0x2008)
+#define SEC_DEL_MMUSID_VAL U(0x3FFFF)
+
+#define SEC_DEL_ADDR_EXT_REG U(0x201C)
+#define SEC_DEL_ADDR_EXT_VAL U(0x15)
+
+#define SEC_SYSCTRL0_REG U(0x0018)
+#define SEC_SYSCTRL0_SOFT_RESET U(3U << 29)
+#define SEC_SYSCTRL0_HARD_RESET U(1U << 31)
+
+static void ethosn_delegate_to_ns(uintptr_t core_addr)
+{
+ mmio_setbits_32(ETHOSN_CORE_SEC_REG(core_addr, SEC_SECCTLR_REG),
+ SEC_SECCTLR_VAL);
+
+ mmio_setbits_32(ETHOSN_CORE_SEC_REG(core_addr, SEC_DEL_REG),
+ SEC_DEL_VAL);
+
+ mmio_setbits_32(ETHOSN_CORE_SEC_REG(core_addr, SEC_DEL_MMUSID_REG),
+ SEC_DEL_MMUSID_VAL);
+
+ mmio_setbits_32(ETHOSN_CORE_SEC_REG(core_addr, SEC_DEL_ADDR_EXT_REG),
+ SEC_DEL_ADDR_EXT_VAL);
+}
+
+static int ethosn_is_sec(void)
+{
+ if ((mmio_read_32(ETHOSN_CORE_SEC_REG(ETHOSN_CORE_ADDR(0), SEC_DEL_REG))
+ & SEC_DEL_EXCC_MASK) != 0U) {
+ return 0;
+ }
+
+ return 1;
+}
+
+static bool ethosn_reset(uintptr_t core_addr, int hard_reset)
+{
+ unsigned int timeout;
+ const uintptr_t sysctrl0_reg =
+ ETHOSN_CORE_SEC_REG(core_addr, SEC_SYSCTRL0_REG);
+ const uint32_t reset_val = (hard_reset != 0) ? SEC_SYSCTRL0_HARD_RESET
+ : SEC_SYSCTRL0_SOFT_RESET;
+
+ mmio_write_32(sysctrl0_reg, reset_val);
+
+ /* Wait for reset to complete */
+ for (timeout = 0U; timeout < ETHOSN_RESET_TIMEOUT_US;
+ timeout += ETHOSN_RESET_WAIT_US) {
+
+ if ((mmio_read_32(sysctrl0_reg) & reset_val) == 0U) {
+ break;
+ }
+
+ udelay(ETHOSN_RESET_WAIT_US);
+ }
+
+ return timeout < ETHOSN_RESET_TIMEOUT_US;
+}
+
+uintptr_t ethosn_smc_handler(uint32_t smc_fid,
+ u_register_t core_idx,
+ u_register_t x2,
+ u_register_t x3,
+ u_register_t x4,
+ void *cookie,
+ void *handle,
+ u_register_t flags)
+{
+ uintptr_t core_addr;
+ int hard_reset = 0;
+
+ /* Only SiP fast calls are expected */
+ if ((GET_SMC_TYPE(smc_fid) != SMC_TYPE_FAST) ||
+ (GET_SMC_OEN(smc_fid) != OEN_SIP_START)) {
+ SMC_RET1(handle, SMC_UNK);
+ }
+
+ /* Truncate parameters to 32-bits for SMC32 */
+ if (GET_SMC_CC(smc_fid) == SMC_32) {
+ core_idx &= 0xFFFFFFFF;
+ x2 &= 0xFFFFFFFF;
+ x3 &= 0xFFFFFFFF;
+ x4 &= 0xFFFFFFFF;
+ }
+
+ if (!is_ethosn_fid(smc_fid)) {
+ SMC_RET1(handle, SMC_UNK);
+ }
+
+ if (ETHOSN_STATUS == ETHOSN_STATUS_DISABLED) {
+ WARN("ETHOSN: Arm Ethos-N NPU not available\n");
+ SMC_RET1(handle, ETHOSN_NOT_SUPPORTED);
+ }
+
+ switch (smc_fid & FUNCID_NUM_MASK) {
+ case ETHOSN_FNUM_VERSION:
+ SMC_RET2(handle, ETHOSN_VERSION_MAJOR, ETHOSN_VERSION_MINOR);
+ case ETHOSN_FNUM_IS_SEC:
+ SMC_RET1(handle, ethosn_is_sec());
+ case ETHOSN_FNUM_HARD_RESET:
+ hard_reset = 1;
+ /* Fallthrough */
+ case ETHOSN_FNUM_SOFT_RESET:
+ if (core_idx >= ETHOSN_NUM_CORES) {
+ WARN("ETHOSN: core index out of range\n");
+ SMC_RET1(handle, ETHOSN_CORE_IDX_OUT_OF_RANGE);
+ }
+
+ core_addr = ETHOSN_CORE_ADDR(core_idx);
+
+ if (!ethosn_reset(core_addr, hard_reset)) {
+ SMC_RET1(handle, ETHOSN_FAILURE);
+ }
+
+ ethosn_delegate_to_ns(core_addr);
+
+ SMC_RET1(handle, ETHOSN_SUCCESS);
+ default:
+ SMC_RET1(handle, SMC_UNK);
+ }
+}
diff --git a/drivers/marvell/comphy/phy-comphy-cp110.c b/drivers/marvell/comphy/phy-comphy-cp110.c
index d1c26f8..c8ba9b8 100644
--- a/drivers/marvell/comphy/phy-comphy-cp110.c
+++ b/drivers/marvell/comphy/phy-comphy-cp110.c
@@ -61,6 +61,11 @@
SAR_RST_PCIE1_CLOCK_CONFIG_CP1_OFFSET)
#define SAR_STATUS_0_REG 200
#define DFX_FROM_COMPHY_ADDR(x) ((x & ~0xffffff) + DFX_BASE)
+/* Common Phy training */
+#define COMPHY_TRX_TRAIN_COMPHY_OFFS 0x1000
+#define COMPHY_TRX_TRAIN_RX_TRAIN_ENABLE 0x1
+#define COMPHY_TRX_RELATIVE_ADDR(comphy_index) (comphy_train_base + \
+ (comphy_index) * COMPHY_TRX_TRAIN_COMPHY_OFFS)
/* The same Units Soft Reset Config register are accessed in all PCIe ports
* initialization, so a spin lock is defined in case when more than 1 CPUs
@@ -829,7 +834,8 @@
static int mvebu_cp110_comphy_xfi_power_on(uint64_t comphy_base,
uint8_t comphy_index,
- uint32_t comphy_mode)
+ uint32_t comphy_mode,
+ uint64_t comphy_train_base)
{
uintptr_t hpipe_addr, sd_ip_addr, comphy_addr, addr;
uint32_t mask, data, speed = COMPHY_GET_SPEED(comphy_mode);
@@ -837,7 +843,6 @@
uint8_t ap_nr, cp_nr;
debug_enter();
-
mvebu_cp110_get_ap_and_cp_nr(&ap_nr, &cp_nr, comphy_base);
if (rx_trainng_done[ap_nr][cp_nr][comphy_index]) {
@@ -1234,6 +1239,14 @@
data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+ /* Force rx training on 10G port */
+ data = mmio_read_32(COMPHY_TRX_RELATIVE_ADDR(comphy_index));
+ data |= COMPHY_TRX_TRAIN_RX_TRAIN_ENABLE;
+ mmio_write_32(COMPHY_TRX_RELATIVE_ADDR(comphy_index), data);
+ mdelay(200);
+ data &= ~COMPHY_TRX_TRAIN_RX_TRAIN_ENABLE;
+ mmio_write_32(COMPHY_TRX_RELATIVE_ADDR(comphy_index), data);
+
debug_exit();
return ret;
@@ -2284,7 +2297,6 @@
uint32_t comphy_mode)
{
uint32_t mask, data;
- uint8_t ap_nr, cp_nr;
uintptr_t comphy_addr = comphy_addr =
COMPHY_ADDR(comphy_base, comphy_index);
@@ -2301,10 +2313,16 @@
reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask);
debug_exit();
- /* Start AP Firmware */
- mvebu_cp110_get_ap_and_cp_nr(&ap_nr, &cp_nr, comphy_base);
- mg_start_ap_fw(cp_nr, comphy_index);
+#if MSS_SUPPORT
+ do {
+ uint8_t ap_nr, cp_nr;
+ /* start ap fw */
+ mvebu_cp110_get_ap_and_cp_nr(&ap_nr, &cp_nr, comphy_base);
+ mg_start_ap_fw(cp_nr, comphy_index);
+
+ } while (0);
+#endif
return 0;
}
@@ -2343,8 +2361,10 @@
return 0;
}
-int mvebu_cp110_comphy_power_on(uint64_t comphy_base, uint8_t comphy_index,
- uint64_t comphy_mode)
+int mvebu_cp110_comphy_power_on(uint64_t comphy_base,
+ uint8_t comphy_index,
+ uint64_t comphy_mode,
+ uint64_t comphy_train_base)
{
int mode = COMPHY_GET_MODE(comphy_mode);
int err = 0;
@@ -2368,7 +2388,8 @@
case (COMPHY_SFI_MODE):
err = mvebu_cp110_comphy_xfi_power_on(comphy_base,
comphy_index,
- comphy_mode);
+ comphy_mode,
+ comphy_train_base);
break;
case (COMPHY_PCIE_MODE):
err = mvebu_cp110_comphy_pcie_power_on(comphy_base,
diff --git a/drivers/marvell/comphy/phy-comphy-cp110.h b/drivers/marvell/comphy/phy-comphy-cp110.h
index b4a2102..0be6c26 100644
--- a/drivers/marvell/comphy/phy-comphy-cp110.h
+++ b/drivers/marvell/comphy/phy-comphy-cp110.h
@@ -89,8 +89,9 @@
uint8_t comphy_index);
int mvebu_cp110_comphy_power_off(uint64_t comphy_base,
uint8_t comphy_index, uint64_t comphy_mode);
-int mvebu_cp110_comphy_power_on(uint64_t comphy_base,
- uint8_t comphy_index, uint64_t comphy_mode);
+int mvebu_cp110_comphy_power_on(uint64_t comphy_base, uint8_t comphy_index,
+ uint64_t comphy_mode,
+ uint64_t comphy_train_base);
int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
uint8_t comphy_index);
int mvebu_cp110_comphy_digital_reset(uint64_t comphy_base, uint8_t comphy_index,
diff --git a/drivers/marvell/ddr_phy_access.c b/drivers/marvell/ddr_phy_access.c
new file mode 100644
index 0000000..352d1ef
--- /dev/null
+++ b/drivers/marvell/ddr_phy_access.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2021 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include "ddr_phy_access.h"
+#include <lib/mmio.h>
+#include <drivers/marvell/ccu.h>
+#include <errno.h>
+
+#define DDR_PHY_END_ADDRESS 0x100000
+
+#ifdef DDR_PHY_DEBUG
+#define debug_printf(...) printf(__VA_ARGS__)
+#else
+#define debug_printf(...)
+#endif
+
+
+/*
+ * This routine writes 'data' to specified 'address' offset,
+ * with optional debug print support
+ */
+int snps_fw_write(uintptr_t offset, uint16_t data)
+{
+ debug_printf("In %s\n", __func__);
+
+ if (offset < DDR_PHY_END_ADDRESS) {
+ mmio_write_16(DDR_PHY_BASE_ADDR + (2 * offset), data);
+ return 0;
+ }
+ debug_printf("%s: illegal offset value: 0x%x\n", __func__, offset);
+ return -EINVAL;
+}
+
+int snps_fw_read(uintptr_t offset, uint16_t *read)
+{
+ debug_printf("In %s\n", __func__);
+
+ if (offset < DDR_PHY_END_ADDRESS) {
+ *read = mmio_read_16(DDR_PHY_BASE_ADDR + (2 * offset));
+ return 0;
+ }
+ debug_printf("%s: illegal offset value: 0x%x\n", __func__, offset);
+ return -EINVAL;
+}
+
+int mvebu_ddr_phy_write(uintptr_t offset, uint16_t data)
+{
+ return snps_fw_write(offset, data);
+}
+
+int mvebu_ddr_phy_read(uintptr_t offset, uint16_t *read)
+{
+ return snps_fw_read(offset, read);
+}
diff --git a/drivers/marvell/ddr_phy_access.h b/drivers/marvell/ddr_phy_access.h
new file mode 100644
index 0000000..5f9a668
--- /dev/null
+++ b/drivers/marvell/ddr_phy_access.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2021 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <plat_marvell.h>
+
+#define DEVICE_BASE 0xF0000000
+#define DDR_PHY_OFFSET 0x1000000
+#define DDR_PHY_BASE_ADDR (DEVICE_BASE + DDR_PHY_OFFSET)
+
+int mvebu_ddr_phy_write(uintptr_t offset, uint16_t data);
+int mvebu_ddr_phy_read(uintptr_t offset, uint16_t *read);
diff --git a/drivers/marvell/mochi/cp110_setup.c b/drivers/marvell/mochi/cp110_setup.c
index 906df66..f12da0e 100644
--- a/drivers/marvell/mochi/cp110_setup.c
+++ b/drivers/marvell/mochi/cp110_setup.c
@@ -14,6 +14,7 @@
#include <drivers/marvell/mochi/cp110_setup.h>
#include <drivers/rambus/trng_ip_76.h>
+#include <efuse_def.h>
#include <plat_marvell.h>
/*
@@ -110,6 +111,8 @@
* TRNG Configuration
******************************************************************************/
#define MVEBU_TRNG_BASE (0x760000)
+#define MVEBU_EFUSE_TRNG_ENABLE_EFUSE_WORD MVEBU_AP_LDX_220_189_EFUSE_OFFS
+#define MVEBU_EFUSE_TRNG_ENABLE_BIT_OFFSET 13 /* LD0[202] */
enum axi_attr {
AXI_ADUNIT_ATTR = 0,
@@ -389,6 +392,22 @@
{
static bool done;
int ret;
+ uint32_t reg_val, efuse;
+
+ /* Set access to LD0 */
+ reg_val = mmio_read_32(MVEBU_AP_EFUSE_SRV_CTRL_REG);
+ reg_val &= ~EFUSE_SRV_CTRL_LD_SELECT_MASK;
+ mmio_write_32(MVEBU_AP_EFUSE_SRV_CTRL_REG, reg_val);
+
+ /* Obtain the AP LD0 bit defining TRNG presence */
+ efuse = mmio_read_32(MVEBU_EFUSE_TRNG_ENABLE_EFUSE_WORD);
+ efuse >>= MVEBU_EFUSE_TRNG_ENABLE_BIT_OFFSET;
+ efuse &= 1;
+
+ if (efuse == 0) {
+ VERBOSE("TRNG is not present, skipping");
+ return;
+ }
if (!done) {
ret = eip76_rng_probe(base + MVEBU_TRNG_BASE);
diff --git a/drivers/marvell/secure_dfx_access/armada_thermal.c b/drivers/marvell/secure_dfx_access/armada_thermal.c
new file mode 100644
index 0000000..4f7191b
--- /dev/null
+++ b/drivers/marvell/secure_dfx_access/armada_thermal.c
@@ -0,0 +1,253 @@
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <errno.h>
+#include <lib/mmio.h>
+#include <mvebu.h>
+#include <stdbool.h>
+#include "dfx.h"
+
+/* #define DEBUG_DFX */
+#ifdef DEBUG_DFX
+#define debug(format...) NOTICE(format)
+#else
+#define debug(format, arg...)
+#endif
+
+#define TSEN_CTRL0 0xf06f8084
+ #define TSEN_CTRL0_START BIT(0)
+ #define TSEN_CTRL0_RESET BIT(1)
+ #define TSEN_CTRL0_ENABLE BIT(2)
+ #define TSEN_CTRL0_AVG_BYPASS BIT(6)
+ #define TSEN_CTRL0_CHAN_SHIFT 13
+ #define TSEN_CTRL0_CHAN_MASK 0xF
+ #define TSEN_CTRL0_OSR_SHIFT 24
+ #define TSEN_CTRL0_OSR_MAX 0x3
+ #define TSEN_CTRL0_MODE_SHIFT 30
+ #define TSEN_CTRL0_MODE_EXTERNAL 0x2U
+ #define TSEN_CTRL0_MODE_MASK 0x3U
+
+#define TSEN_CTRL1 0xf06f8088
+ #define TSEN_CTRL1_INT_EN BIT(25)
+ #define TSEN_CTRL1_HYST_SHIFT 19
+ #define TSEN_CTRL1_HYST_MASK (0x3 << TSEN_CTRL1_HYST_SHIFT)
+ #define TSEN_CTRL1_THRESH_SHIFT 3
+ #define TSEN_CTRL1_THRESH_MASK (0x3ff << TSEN_CTRL1_THRESH_SHIFT)
+
+#define TSEN_STATUS 0xf06f808c
+ #define TSEN_STATUS_VALID_OFFSET 16
+ #define TSEN_STATUS_VALID_MASK (0x1 << TSEN_STATUS_VALID_OFFSET)
+ #define TSEN_STATUS_TEMP_OUT_OFFSET 0
+ #define TSEN_STATUS_TEMP_OUT_MASK (0x3FF << TSEN_STATUS_TEMP_OUT_OFFSET)
+
+#define DFX_SERVER_IRQ_SUM_MASK_REG 0xf06f8104
+ #define DFX_SERVER_IRQ_EN BIT(1)
+
+#define DFX_IRQ_CAUSE_REG 0xf06f8108
+
+#define DFX_IRQ_MASK_REG 0xf06f810c
+ #define DFX_IRQ_TSEN_OVERHEAT_OFFSET BIT(22)
+
+#define THERMAL_SEN_OUTPUT_MSB 512
+#define THERMAL_SEN_OUTPUT_COMP 1024
+
+#define COEF_M 423
+#define COEF_B -150000LL
+
+static void armada_ap806_thermal_read(u_register_t *temp)
+{
+ uint32_t reg;
+
+ reg = mmio_read_32(TSEN_STATUS);
+
+ reg = ((reg & TSEN_STATUS_TEMP_OUT_MASK) >>
+ TSEN_STATUS_TEMP_OUT_OFFSET);
+
+ /*
+ * TSEN output format is signed as a 2s complement number
+ * ranging from-512 to +511. when MSB is set, need to
+ * calculate the complement number
+ */
+ if (reg >= THERMAL_SEN_OUTPUT_MSB)
+ reg -= THERMAL_SEN_OUTPUT_COMP;
+
+ *temp = ((COEF_M * ((signed int)reg)) - COEF_B);
+}
+
+static void armada_ap806_thermal_irq(void)
+{
+ /* Dummy read, register ROC */
+ mmio_read_32(DFX_IRQ_CAUSE_REG);
+}
+
+static void armada_ap806_thermal_overheat_irq_init(void)
+{
+ uint32_t reg;
+
+ /* Clear DFX temperature IRQ cause */
+ reg = mmio_read_32(DFX_IRQ_CAUSE_REG);
+
+ /* Enable DFX Temperature IRQ */
+ reg = mmio_read_32(DFX_IRQ_MASK_REG);
+ reg |= DFX_IRQ_TSEN_OVERHEAT_OFFSET;
+ mmio_write_32(DFX_IRQ_MASK_REG, reg);
+
+ /* Enable DFX server IRQ */
+ reg = mmio_read_32(DFX_SERVER_IRQ_SUM_MASK_REG);
+ reg |= DFX_SERVER_IRQ_EN;
+ mmio_write_32(DFX_SERVER_IRQ_SUM_MASK_REG, reg);
+
+ /* Enable overheat interrupt */
+ reg = mmio_read_32(TSEN_CTRL1);
+ reg |= TSEN_CTRL1_INT_EN;
+ mmio_write_32(TSEN_CTRL1, reg);
+}
+
+static unsigned int armada_mc_to_reg_temp(unsigned int temp_mc)
+{
+ unsigned int sample;
+
+ sample = (temp_mc + COEF_B) / COEF_M;
+
+ return sample & 0x3ff;
+}
+
+/*
+ * The documentation states:
+ * high/low watermark = threshold +/- 0.4761 * 2^(hysteresis + 2)
+ * which is the mathematical derivation for:
+ * 0x0 <=> 1.9°C, 0x1 <=> 3.8°C, 0x2 <=> 7.6°C, 0x3 <=> 15.2°C
+ */
+static unsigned int hyst_levels_mc[] = {1900, 3800, 7600, 15200};
+
+static unsigned int armada_mc_to_reg_hyst(int hyst_mc)
+{
+ int i;
+
+ /*
+ * We will always take the smallest possible hysteresis to avoid risking
+ * the hardware integrity by enlarging the threshold by +8°C in the
+ * worst case.
+ */
+ for (i = ARRAY_SIZE(hyst_levels_mc) - 1; i > 0; i--)
+ if (hyst_mc >= hyst_levels_mc[i])
+ break;
+
+ return i;
+}
+
+static void armada_ap806_thermal_threshold(int thresh_mc, int hyst_mc)
+{
+ uint32_t ctrl1;
+ unsigned int threshold = armada_mc_to_reg_temp(thresh_mc);
+ unsigned int hysteresis = armada_mc_to_reg_hyst(hyst_mc);
+
+ ctrl1 = mmio_read_32(TSEN_CTRL1);
+ /* Set Threshold */
+ if (thresh_mc >= 0) {
+ ctrl1 &= ~(TSEN_CTRL1_THRESH_MASK);
+ ctrl1 |= threshold << TSEN_CTRL1_THRESH_SHIFT;
+ }
+
+ /* Set Hysteresis */
+ if (hyst_mc >= 0) {
+ ctrl1 &= ~(TSEN_CTRL1_HYST_MASK);
+ ctrl1 |= hysteresis << TSEN_CTRL1_HYST_SHIFT;
+ }
+
+ mmio_write_32(TSEN_CTRL1, ctrl1);
+}
+
+static void armada_select_channel(int channel)
+{
+ uint32_t ctrl0;
+
+ /* Stop the measurements */
+ ctrl0 = mmio_read_32(TSEN_CTRL0);
+ ctrl0 &= ~TSEN_CTRL0_START;
+ mmio_write_32(TSEN_CTRL0, ctrl0);
+
+ /* Reset the mode, internal sensor will be automatically selected */
+ ctrl0 &= ~(TSEN_CTRL0_MODE_MASK << TSEN_CTRL0_MODE_SHIFT);
+
+ /* Other channels are external and should be selected accordingly */
+ if (channel) {
+ /* Change the mode to external */
+ ctrl0 |= TSEN_CTRL0_MODE_EXTERNAL <<
+ TSEN_CTRL0_MODE_SHIFT;
+ /* Select the sensor */
+ ctrl0 &= ~(TSEN_CTRL0_CHAN_MASK << TSEN_CTRL0_CHAN_SHIFT);
+ ctrl0 |= (channel - 1) << TSEN_CTRL0_CHAN_SHIFT;
+ }
+
+ /* Actually set the mode/channel */
+ mmio_write_32(TSEN_CTRL0, ctrl0);
+
+ /* Re-start the measurements */
+ ctrl0 |= TSEN_CTRL0_START;
+ mmio_write_32(TSEN_CTRL0, ctrl0);
+}
+
+static void armada_ap806_thermal_init(void)
+{
+ uint32_t reg;
+
+ reg = mmio_read_32(TSEN_CTRL0);
+ reg &= ~TSEN_CTRL0_RESET;
+ reg |= TSEN_CTRL0_START | TSEN_CTRL0_ENABLE;
+
+ /* Sample every ~2ms */
+ reg |= TSEN_CTRL0_OSR_MAX << TSEN_CTRL0_OSR_SHIFT;
+
+ /* Enable average (2 samples by default) */
+ reg &= ~TSEN_CTRL0_AVG_BYPASS;
+
+ mmio_write_32(TSEN_CTRL0, reg);
+
+ debug("thermal: Initialization done\n");
+}
+
+static void armada_is_valid(u_register_t *read)
+{
+ *read = (mmio_read_32(TSEN_STATUS) & TSEN_STATUS_VALID_MASK);
+}
+
+int mvebu_dfx_thermal_handle(u_register_t func, u_register_t *read,
+ u_register_t x2, u_register_t x3)
+{
+ debug_enter();
+
+ switch (func) {
+ case MV_SIP_DFX_THERMAL_INIT:
+ armada_ap806_thermal_init();
+ break;
+ case MV_SIP_DFX_THERMAL_READ:
+ armada_ap806_thermal_read(read);
+ break;
+ case MV_SIP_DFX_THERMAL_IRQ:
+ armada_ap806_thermal_irq();
+ break;
+ case MV_SIP_DFX_THERMAL_THRESH:
+ armada_ap806_thermal_threshold(x2, x3);
+ armada_ap806_thermal_overheat_irq_init();
+ break;
+ case MV_SIP_DFX_THERMAL_IS_VALID:
+ armada_is_valid(read);
+ break;
+ case MV_SIP_DFX_THERMAL_SEL_CHANNEL:
+ armada_select_channel(x2);
+ break;
+ default:
+ ERROR("unsupported dfx func\n");
+ return -EINVAL;
+ }
+
+ debug_exit();
+
+ return 0;
+}
diff --git a/drivers/marvell/secure_dfx_access/dfx.h b/drivers/marvell/secure_dfx_access/dfx.h
new file mode 100644
index 0000000..88c4de8
--- /dev/null
+++ b/drivers/marvell/secure_dfx_access/dfx.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* DFX sub-FID */
+#define MV_SIP_DFX_THERMAL_INIT 1
+#define MV_SIP_DFX_THERMAL_READ 2
+#define MV_SIP_DFX_THERMAL_IS_VALID 3
+#define MV_SIP_DFX_THERMAL_IRQ 4
+#define MV_SIP_DFX_THERMAL_THRESH 5
+#define MV_SIP_DFX_THERMAL_SEL_CHANNEL 6
+
+#define MV_SIP_DFX_SREAD 20
+#define MV_SIP_DFX_SWRITE 21
+
+int mvebu_dfx_thermal_handle(u_register_t func, u_register_t *read,
+ u_register_t x2, u_register_t x3);
+int mvebu_dfx_misc_handle(u_register_t func, u_register_t *read,
+ u_register_t addr, u_register_t val);
diff --git a/drivers/marvell/secure_dfx_access/misc_dfx.c b/drivers/marvell/secure_dfx_access/misc_dfx.c
new file mode 100644
index 0000000..189105f
--- /dev/null
+++ b/drivers/marvell/secure_dfx_access/misc_dfx.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2021 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <common/debug.h>
+#include <lib/mmio.h>
+#include "dfx.h"
+#include <mvebu_def.h>
+#include <mvebu.h>
+#include <errno.h>
+
+/* #define DEBUG_DFX */
+#ifdef DEBUG_DFX
+#define debug(format...) NOTICE(format)
+#else
+#define debug(format, arg...)
+#endif
+
+#define SAR_BASE (MVEBU_REGS_BASE + 0x6F8200)
+#define SAR_SIZE 0x4
+#define AP_DEV_ID_STATUS_REG (MVEBU_REGS_BASE + 0x6F8240)
+#define JTAG_DEV_ID_STATUS_REG (MVEBU_REGS_BASE + 0x6F8244)
+#define EFUSE_CTRL (MVEBU_REGS_BASE + 0x6F8008)
+#define EFUSE_LD_BASE (MVEBU_REGS_BASE + 0x6F8F00)
+#define EFUSE_LD_SIZE 0x1C
+#define EFUSE_HD_BASE (MVEBU_REGS_BASE + 0x6F9000)
+#define EFUSE_HD_SIZE 0x3F8
+
+/* AP806 CPU DFS register mapping*/
+#define AP806_CA72MP2_0_PLL_CR_0_BASE (MVEBU_REGS_BASE + 0x6F8278)
+#define AP806_CA72MP2_0_PLL_CR_1_BASE (MVEBU_REGS_BASE + 0x6F8280)
+#define AP806_CA72MP2_0_PLL_CR_2_BASE (MVEBU_REGS_BASE + 0x6F8284)
+#define AP806_CA72MP2_0_PLL_SR_BASE (MVEBU_REGS_BASE + 0x6F8C94)
+
+/* AP807 CPU DFS register mapping */
+#define AP807_DEVICE_GENERAL_CR_10_BASE (MVEBU_REGS_BASE + 0x6F8278)
+#define AP807_DEVICE_GENERAL_CR_11_BASE (MVEBU_REGS_BASE + 0x6F827C)
+#define AP807_DEVICE_GENERAL_STATUS_6_BASE (MVEBU_REGS_BASE + 0x6F8C98)
+
+#ifdef MVEBU_SOC_AP807
+ #define CLUSTER_OFFSET 0x8
+ #define CLK_DIVIDER_REG AP807_DEVICE_GENERAL_CR_10_BASE
+ #define CLK_FORCE_REG AP807_DEVICE_GENERAL_CR_11_BASE
+ #define CLK_RATIO_REG AP807_DEVICE_GENERAL_CR_11_BASE
+ #define CLK_RATIO_STATE_REG AP807_DEVICE_GENERAL_STATUS_6_BASE
+#else
+ #define CLUSTER_OFFSET 0x14
+ #define CLK_DIVIDER_REG AP806_CA72MP2_0_PLL_CR_0_BASE
+ #define CLK_FORCE_REG AP806_CA72MP2_0_PLL_CR_1_BASE
+ #define CLK_RATIO_REG AP806_CA72MP2_0_PLL_CR_2_BASE
+ #define CLK_RATIO_STATE_REG AP806_CA72MP2_0_PLL_SR_BASE
+#endif /* MVEBU_SOC_AP807 */
+
+static _Bool is_valid(u_register_t addr)
+{
+ switch (addr) {
+ case AP_DEV_ID_STATUS_REG:
+ case JTAG_DEV_ID_STATUS_REG:
+ case SAR_BASE ... (SAR_BASE + SAR_SIZE):
+ case EFUSE_LD_BASE ... (EFUSE_LD_BASE + EFUSE_LD_SIZE):
+ case EFUSE_HD_BASE ... (EFUSE_HD_BASE + EFUSE_HD_SIZE):
+ case EFUSE_CTRL:
+ /* cpu-clk related registers */
+ case CLK_DIVIDER_REG:
+ case CLK_DIVIDER_REG + CLUSTER_OFFSET:
+ case CLK_FORCE_REG:
+ case CLK_FORCE_REG + CLUSTER_OFFSET:
+#ifndef MVEBU_SOC_AP807
+ case CLK_RATIO_REG:
+ case CLK_RATIO_REG + CLUSTER_OFFSET:
+#endif
+ case CLK_RATIO_STATE_REG:
+ case CLK_RATIO_STATE_REG + CLUSTER_OFFSET:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int armada_dfx_sread(u_register_t *read, u_register_t addr)
+{
+ if (!is_valid(addr))
+ return -EINVAL;
+
+ *read = mmio_read_32(addr);
+
+ return 0;
+}
+
+static int armada_dfx_swrite(u_register_t addr, u_register_t val)
+{
+ if (!is_valid(addr))
+ return -EINVAL;
+
+ mmio_write_32(addr, val);
+
+ return 0;
+}
+
+int mvebu_dfx_misc_handle(u_register_t func, u_register_t *read,
+ u_register_t addr, u_register_t val)
+{
+ debug_enter();
+
+ debug("func %ld, addr 0x%lx, val 0x%lx\n", func, addr, val);
+
+ switch (func) {
+ case MV_SIP_DFX_SREAD:
+ return armada_dfx_sread(read, addr);
+ case MV_SIP_DFX_SWRITE:
+ return armada_dfx_swrite(addr, val);
+ default:
+ ERROR("unsupported dfx misc sub-func\n");
+ return -EINVAL;
+ }
+
+ debug_exit();
+
+ return 0;
+}
diff --git a/fdts/juno-ethosn.dtsi b/fdts/juno-ethosn.dtsi
new file mode 100644
index 0000000..87ab378
--- /dev/null
+++ b/fdts/juno-ethosn.dtsi
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ethosn: ethosn@6f300000 {
+ compatible = "ethosn";
+ reg = <0 0x6f300000 0 0x00100000>;
+ status = "okay";
+
+ /*
+ * Single-core NPU. For multi-core NPU, additional core nodes
+ * and reg values must be added.
+ */
+ core0 {
+ compatible = "ethosn-core";
+ status = "okay";
+ };
+ };
+};
diff --git a/fdts/juno.dts b/fdts/juno.dts
new file mode 100644
index 0000000..56fe167
--- /dev/null
+++ b/fdts/juno.dts
@@ -0,0 +1,15 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+
+};
+
+#if ARM_ETHOSN_NPU_DRIVER
+ #include "juno-ethosn.dtsi"
+#endif
diff --git a/include/drivers/arm/ethosn.h b/include/drivers/arm/ethosn.h
new file mode 100644
index 0000000..6de2abb
--- /dev/null
+++ b/include/drivers/arm/ethosn.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef ETHOSN_H
+#define ETHOSN_H
+
+#include <lib/smccc.h>
+
+/* Function numbers */
+#define ETHOSN_FNUM_VERSION U(0x50)
+#define ETHOSN_FNUM_IS_SEC U(0x51)
+#define ETHOSN_FNUM_HARD_RESET U(0x52)
+#define ETHOSN_FNUM_SOFT_RESET U(0x53)
+/* 0x54-0x5F reserved for future use */
+
+/* SMC64 function IDs */
+#define ETHOSN_FID_64(func_num) U(0xC2000000 | func_num)
+#define ETHOSN_FID_VERSION_64 ETHOSN_FID_64(ETHOSN_FNUM_VERSION)
+#define ETHOSN_FID_IS_SEC_64 ETHOSN_FID_64(ETHOSN_FNUM_IS_SEC)
+#define ETHOSN_FID_HARD_RESET_64 ETHOSN_FID_64(ETHOSN_FNUM_HARD_RESET)
+#define ETHOSN_FID_SOFT_RESET_64 ETHOSN_FID_64(ETHOSN_FNUM_SOFT_RESET)
+
+/* SMC32 function IDs */
+#define ETHOSN_FID_32(func_num) U(0x82000000 | func_num)
+#define ETHOSN_FID_VERSION_32 ETHOSN_FID_32(ETHOSN_FNUM_VERSION)
+#define ETHOSN_FID_IS_SEC_32 ETHOSN_FID_32(ETHOSN_FNUM_IS_SEC)
+#define ETHOSN_FID_HARD_RESET_32 ETHOSN_FID_32(ETHOSN_FNUM_HARD_RESET)
+#define ETHOSN_FID_SOFT_RESET_32 ETHOSN_FID_32(ETHOSN_FNUM_SOFT_RESET)
+
+#define ETHOSN_NUM_SMC_CALLS 8
+
+/* Macro to identify function calls */
+#define ETHOSN_FID_MASK U(0xFFF0)
+#define ETHOSN_FID_VALUE U(0x50)
+#define is_ethosn_fid(_fid) (((_fid) & ETHOSN_FID_MASK) == ETHOSN_FID_VALUE)
+
+/* Service version */
+#define ETHOSN_VERSION_MAJOR U(0)
+#define ETHOSN_VERSION_MINOR U(1)
+
+/* Return codes for function calls */
+#define ETHOSN_SUCCESS 0
+#define ETHOSN_NOT_SUPPORTED -1
+/* -2 Reserved for NOT_REQUIRED */
+/* -3 Reserved for INVALID_PARAMETER */
+#define ETHOSN_FAILURE -4
+#define ETHOSN_CORE_IDX_OUT_OF_RANGE -5
+
+uintptr_t ethosn_smc_handler(uint32_t smc_fid,
+ u_register_t core_idx,
+ u_register_t x2,
+ u_register_t x3,
+ u_register_t x4,
+ void *cookie,
+ void *handle,
+ u_register_t flags);
+
+#endif /* ETHOSN_H */
diff --git a/include/plat/arm/common/arm_sip_svc.h b/include/plat/arm/common/arm_sip_svc.h
index 85fdb28..2eeed95 100644
--- a/include/plat/arm/common/arm_sip_svc.h
+++ b/include/plat/arm/common/arm_sip_svc.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2019,2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -25,6 +25,12 @@
/* DEBUGFS_SMC_32 0x82000030U */
/* DEBUGFS_SMC_64 0xC2000030U */
+/*
+ * Arm Ethos-N NPU SiP SMC function IDs
+ * 0xC2000050-0xC200005F
+ * 0x82000050-0x8200005F
+ */
+
/* ARM SiP Service Calls version numbers */
#define ARM_SIP_SVC_VERSION_MAJOR U(0x0)
#define ARM_SIP_SVC_VERSION_MINOR U(0x2)
diff --git a/include/plat/arm/common/fconf_ethosn_getter.h b/include/plat/arm/common/fconf_ethosn_getter.h
new file mode 100644
index 0000000..0fd1f02
--- /dev/null
+++ b/include/plat/arm/common/fconf_ethosn_getter.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FCONF_ETHOSN_GETTER_H
+#define FCONF_ETHOSN_GETTER_H
+
+#include <assert.h>
+
+#include <lib/fconf/fconf.h>
+
+#define hw_config__ethosn_config_getter(prop) ethosn_config.prop
+#define hw_config__ethosn_core_addr_getter(idx) __extension__ ({ \
+ assert(idx < ethosn_config.num_cores); \
+ ethosn_config.core_addr[idx]; \
+})
+
+#define ETHOSN_STATUS_DISABLED U(0)
+#define ETHOSN_STATUS_ENABLED U(1)
+
+#define ETHOSN_CORE_NUM_MAX U(64)
+
+struct ethosn_config_t {
+ uint8_t status;
+ uint32_t num_cores;
+ uint64_t core_addr[ETHOSN_CORE_NUM_MAX];
+};
+
+int fconf_populate_arm_ethosn(uintptr_t config);
+
+extern struct ethosn_config_t ethosn_config;
+
+#endif /* FCONF_ETHOSN_GETTER_H */
diff --git a/include/plat/marvell/armada/a8k/common/efuse_def.h b/include/plat/marvell/armada/a8k/common/efuse_def.h
new file mode 100644
index 0000000..ff1d4a3
--- /dev/null
+++ b/include/plat/marvell/armada/a8k/common/efuse_def.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2021 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef EFUSE_DEF_H
+#define EFUSE_DEF_H
+
+#include <platform_def.h>
+
+#define MVEBU_AP_EFUSE_SRV_CTRL_REG (MVEBU_AP_GEN_MGMT_BASE + 0x8)
+#define EFUSE_SRV_CTRL_LD_SELECT_OFFS 6
+#define EFUSE_SRV_CTRL_LD_SELECT_MASK (1 << EFUSE_SRV_CTRL_LD_SELECT_OFFS)
+
+#define MVEBU_AP_LD_EFUSE_BASE (MVEBU_AP_GEN_MGMT_BASE + 0xF00)
+/* Bits [31:0] - 32 data bits total */
+#define MVEBU_AP_LDX_31_0_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE)
+/* Bits [62:32] - 31 data bits total 32nd bit is parity for bits [62:0]*/
+#define MVEBU_AP_LDX_62_32_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0x4)
+/* Bits [94:63] - 32 data bits total */
+#define MVEBU_AP_LDX_94_63_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0x8)
+/* Bits [125:95] - 31 data bits total, 32nd bit is parity for bits [125:63] */
+#define MVEBU_AP_LDX_125_95_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0xC)
+/* Bits [157:126] - 32 data bits total */
+#define MVEBU_AP_LDX_126_157_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0x10)
+/* Bits [188:158] - 31 data bits total, 32nd bit is parity for bits [188:126] */
+#define MVEBU_AP_LDX_188_158_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0x14)
+/* Bits [220:189] - 32 data bits total */
+#define MVEBU_AP_LDX_220_189_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0x18)
+
+#endif /* EFUSE_DEF_H */
diff --git a/plat/arm/board/juno/fdts/juno_fw_config.dts b/plat/arm/board/juno/fdts/juno_fw_config.dts
index c0538f8..4b88efe 100644
--- a/plat/arm/board/juno/fdts/juno_fw_config.dts
+++ b/plat/arm/board/juno/fdts/juno_fw_config.dts
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2019-2020, ARM Limited. All rights reserved.
+ * Copyright (c) 2019-2021, ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -17,5 +17,11 @@
max-size = <0x200>;
id = <TB_FW_CONFIG_ID>;
};
+
+ hw-config {
+ load-address = <0x0 0x82000000>;
+ max-size = <0x8000>;
+ id = <HW_CONFIG_ID>;
+ };
};
};
diff --git a/plat/arm/board/juno/include/platform_def.h b/plat/arm/board/juno/include/platform_def.h
index 91c3ae7..5299a7b 100644
--- a/plat/arm/board/juno/include/platform_def.h
+++ b/plat/arm/board/juno/include/platform_def.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -53,6 +53,14 @@
#define PLAT_ARM_DRAM2_BASE ULL(0x880000000)
#define PLAT_ARM_DRAM2_SIZE ULL(0x180000000)
+#define PLAT_HW_CONFIG_DTB_BASE ULL(0x82000000)
+#define PLAT_HW_CONFIG_DTB_SIZE ULL(0x00008000) /* 32KB */
+
+#define ARM_DTB_DRAM_NS MAP_REGION_FLAT( \
+ PLAT_HW_CONFIG_DTB_BASE, \
+ PLAT_HW_CONFIG_DTB_SIZE, \
+ MT_MEMORY | MT_RO | MT_NS)
+
/* virtual address used by dynamic mem_protect for chunk_base */
#define PLAT_ARM_MEM_PROTEC_VA_FRAME UL(0xc0000000)
@@ -108,7 +116,7 @@
#ifdef IMAGE_BL31
# define PLAT_ARM_MMAP_ENTRIES 7
-# define MAX_XLAT_TABLES 3
+# define MAX_XLAT_TABLES 5
#endif
#ifdef IMAGE_BL32
diff --git a/plat/arm/board/juno/juno_bl2_setup.c b/plat/arm/board/juno/juno_bl2_setup.c
index 95ef77c..849acd6 100644
--- a/plat/arm/board/juno/juno_bl2_setup.c
+++ b/plat/arm/board/juno/juno_bl2_setup.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2017,2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -8,6 +8,9 @@
#include <common/bl_common.h>
#include <common/desc_image_load.h>
+#include <lib/fconf/fconf.h>
+#include <lib/fconf/fconf_dyn_cfg_getter.h>
+
#include <plat/arm/common/plat_arm.h>
#if JUNO_AARCH32_EL3_RUNTIME
@@ -30,4 +33,41 @@
return err;
}
+
+#else
+
+/*******************************************************************************
+ * This function returns the list of executable images
+ ******************************************************************************/
+struct bl_params *plat_get_next_bl_params(void)
+{
+ struct bl_params *arm_bl_params = arm_get_next_bl_params();
+
+#if __aarch64__
+ const struct dyn_cfg_dtb_info_t *fw_config_info;
+ bl_mem_params_node_t *param_node;
+ uintptr_t fw_config_base = 0U;
+ entry_point_info_t *ep_info;
+
+ /* Get BL31 image node */
+ param_node = get_bl_mem_params_node(BL31_IMAGE_ID);
+ assert(param_node != NULL);
+
+ /* Get fw_config load address */
+ fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, FW_CONFIG_ID);
+ assert(fw_config_info != NULL);
+
+ fw_config_base = fw_config_info->config_addr;
+ assert(fw_config_base != 0U);
+
+ /*
+ * Get the entry point info of BL31 image and override
+ * arg1 of entry point info with fw_config base address
+ */
+ ep_info = ¶m_node->ep_info;
+ ep_info->args.arg1 = (uint32_t)fw_config_base;
+#endif /* __aarch64__ */
+
+ return arm_bl_params;
+}
#endif /* JUNO_AARCH32_EL3_RUNTIME */
diff --git a/plat/arm/board/juno/juno_bl31_setup.c b/plat/arm/board/juno/juno_bl31_setup.c
new file mode 100644
index 0000000..7a0a6d9
--- /dev/null
+++ b/plat/arm/board/juno/juno_bl31_setup.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (c) 2021, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <common/debug.h>
+#include <lib/fconf/fconf.h>
+#include <lib/fconf/fconf_dyn_cfg_getter.h>
+
+#include <plat/arm/common/plat_arm.h>
+
+void __init bl31_early_platform_setup2(u_register_t arg0,
+ u_register_t arg1, u_register_t arg2, u_register_t arg3)
+{
+ const struct dyn_cfg_dtb_info_t *soc_fw_config_info;
+
+ INFO("BL31 FCONF: FW_CONFIG address = %lx\n", (uintptr_t)arg1);
+
+ /* Fill the properties struct with the info from the config dtb */
+ fconf_populate("FW_CONFIG", arg1);
+
+ soc_fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, SOC_FW_CONFIG_ID);
+ if (soc_fw_config_info != NULL) {
+ arg1 = soc_fw_config_info->config_addr;
+ }
+
+ arm_bl31_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
+
+ /*
+ * Initialize Interconnect for this cluster during cold boot.
+ * No need for locks as no other CPU is active.
+ */
+ plat_arm_interconnect_init();
+
+ /*
+ * Enable Interconnect coherency for the primary CPU's cluster.
+ * Earlier bootloader stages might already do this (e.g. Trusted
+ * Firmware's BL1 does it) but we can't assume so. There is no harm in
+ * executing this code twice anyway.
+ * Platform specific PSCI code will enable coherency for other
+ * clusters.
+ */
+ plat_arm_interconnect_enter_coherency();
+}
+
+void __init bl31_plat_arch_setup(void)
+{
+ arm_bl31_plat_arch_setup();
+
+ /* HW_CONFIG was also loaded by BL2 */
+ const struct dyn_cfg_dtb_info_t *hw_config_info;
+
+ hw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, HW_CONFIG_ID);
+ assert(hw_config_info != NULL);
+
+ fconf_populate("HW_CONFIG", hw_config_info->config_addr);
+}
diff --git a/plat/arm/board/juno/juno_common.c b/plat/arm/board/juno/juno_common.c
index da4918c..cb183d5 100644
--- a/plat/arm/board/juno/juno_common.c
+++ b/plat/arm/board/juno/juno_common.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -75,6 +75,7 @@
ARM_V2M_MAP_MEM_PROTECT,
#endif
SOC_CSS_MAP_DEVICE,
+ ARM_DTB_DRAM_NS,
{0}
};
#endif
diff --git a/plat/arm/board/juno/platform.mk b/plat/arm/board/juno/platform.mk
index 5cf5749..92fbf35 100644
--- a/plat/arm/board/juno/platform.mk
+++ b/plat/arm/board/juno/platform.mk
@@ -83,6 +83,10 @@
lib/cpus/aarch64/cortex_a57.S \
lib/cpus/aarch64/cortex_a72.S \
lib/utils/mem_region.c \
+ common/fdt_wrappers.c \
+ lib/fconf/fconf.c \
+ lib/fconf/fconf_dyn_cfg_getter.c \
+ plat/arm/board/juno/juno_bl31_setup.c \
plat/arm/board/juno/juno_pm.c \
plat/arm/board/juno/juno_topology.c \
plat/arm/common/arm_nor_psci_mem_protect.c \
@@ -174,15 +178,19 @@
# Add the FDT_SOURCES and options for Dynamic Config
FDT_SOURCES += plat/arm/board/juno/fdts/${PLAT}_fw_config.dts \
- plat/arm/board/juno/fdts/${PLAT}_tb_fw_config.dts
+ plat/arm/board/juno/fdts/${PLAT}_tb_fw_config.dts \
+ fdts/${PLAT}.dts
FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
+HW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}.dtb
# Add the FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config,${FW_CONFIG}))
# Add the TB_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config,${TB_FW_CONFIG}))
+# Add the HW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${HW_CONFIG},--hw-config,${HW_CONFIG}))
include plat/arm/board/common/board_common.mk
include plat/arm/common/arm_common.mk
diff --git a/plat/arm/common/arm_common.mk b/plat/arm/common/arm_common.mk
index a225b40..232d562 100644
--- a/plat/arm/common/arm_common.mk
+++ b/plat/arm/common/arm_common.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -100,6 +100,11 @@
$(eval $(call add_define,ARM_PRELOADED_DTB_BASE))
endif
+# Arm Ethos-N NPU SiP service
+ARM_ETHOSN_NPU_DRIVER := 0
+$(eval $(call assert_boolean,ARM_ETHOSN_NPU_DRIVER))
+$(eval $(call add_define,ARM_ETHOSN_NPU_DRIVER))
+
# Use an implementation of SHA-256 with a smaller memory footprint but reduced
# speed.
$(eval $(call add_define,MBEDTLS_SHA256_SMALLER))
@@ -248,14 +253,26 @@
plat/arm/common/arm_topology.c \
plat/common/plat_psci_common.c
+ifneq ($(filter 1,${ENABLE_PMF} ${ARM_ETHOSN_NPU_DRIVER}),)
+ARM_SVC_HANDLER_SRCS :=
+
+ifeq (${ENABLE_PMF},1)
+ARM_SVC_HANDLER_SRCS += lib/pmf/pmf_smc.c
+endif
+
+ifeq (${ARM_ETHOSN_NPU_DRIVER},1)
+ARM_SVC_HANDLER_SRCS += plat/arm/common/fconf/fconf_ethosn_getter.c \
+ drivers/delay_timer/delay_timer.c \
+ drivers/arm/ethosn/ethosn_smc.c
+endif
+
-ifeq (${ENABLE_PMF}, 1)
ifeq (${ARCH}, aarch64)
BL31_SOURCES += plat/arm/common/aarch64/execution_state_switch.c\
plat/arm/common/arm_sip_svc.c \
- lib/pmf/pmf_smc.c
+ ${ARM_SVC_HANDLER_SRCS}
else
BL32_SOURCES += plat/arm/common/arm_sip_svc.c \
- lib/pmf/pmf_smc.c
+ ${ARM_SVC_HANDLER_SRCS}
endif
endif
diff --git a/plat/arm/common/arm_sip_svc.c b/plat/arm/common/arm_sip_svc.c
index 9f5d455..6456c78 100644
--- a/plat/arm/common/arm_sip_svc.c
+++ b/plat/arm/common/arm_sip_svc.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2019,2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -8,6 +8,7 @@
#include <common/debug.h>
#include <common/runtime_svc.h>
+#include <drivers/arm/ethosn.h>
#include <lib/debugfs.h>
#include <lib/pmf/pmf.h>
#include <plat/arm/common/arm_sip_svc.h>
@@ -50,6 +51,8 @@
{
int call_count = 0;
+#if ENABLE_PMF
+
/*
* Dispatch PMF calls to PMF SMC handler and return its return
* value
@@ -59,6 +62,8 @@
handle, flags);
}
+#endif /* ENABLE_PMF */
+
#if USE_DEBUGFS
if (is_debugfs_fid(smc_fid)) {
@@ -68,6 +73,15 @@
#endif /* USE_DEBUGFS */
+#if ARM_ETHOSN_NPU_DRIVER
+
+ if (is_ethosn_fid(smc_fid)) {
+ return ethosn_smc_handler(smc_fid, x1, x2, x3, x4, cookie,
+ handle, flags);
+ }
+
+#endif /* ARM_ETHOSN_NPU_DRIVER */
+
switch (smc_fid) {
case ARM_SIP_SVC_EXE_STATE_SWITCH: {
/* Execution state can be switched only if EL3 is AArch64 */
@@ -92,6 +106,11 @@
/* PMF calls */
call_count += PMF_NUM_SMC_CALLS;
+#if ARM_ETHOSN_NPU_DRIVER
+ /* ETHOSN calls */
+ call_count += ETHOSN_NUM_SMC_CALLS;
+#endif /* ARM_ETHOSN_NPU_DRIVER */
+
/* State switch call */
call_count += 1;
diff --git a/plat/arm/common/fconf/fconf_ethosn_getter.c b/plat/arm/common/fconf/fconf_ethosn_getter.c
new file mode 100644
index 0000000..1ba9f3a
--- /dev/null
+++ b/plat/arm/common/fconf/fconf_ethosn_getter.c
@@ -0,0 +1,108 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include <common/debug.h>
+#include <common/fdt_wrappers.h>
+#include <libfdt.h>
+#include <plat/arm/common/fconf_ethosn_getter.h>
+
+struct ethosn_config_t ethosn_config;
+
+static uint8_t fdt_node_get_status(const void *fdt, int node)
+{
+ int len;
+ uint8_t status = ETHOSN_STATUS_DISABLED;
+ const char *node_status;
+
+ node_status = fdt_getprop(fdt, node, "status", &len);
+ if (node_status == NULL ||
+ (len == 5 && /* Includes null character */
+ strncmp(node_status, "okay", 4U) == 0)) {
+ status = ETHOSN_STATUS_ENABLED;
+ }
+
+ return status;
+}
+
+int fconf_populate_ethosn_config(uintptr_t config)
+{
+ int ethosn_node;
+ int sub_node;
+ uint8_t ethosn_status;
+ uint32_t core_count = 0U;
+ uint32_t core_addr_idx = 0U;
+ const void *hw_conf_dtb = (const void *)config;
+
+ /* Find offset to node with 'ethosn' compatible property */
+ ethosn_node = fdt_node_offset_by_compatible(hw_conf_dtb, -1, "ethosn");
+ if (ethosn_node < 0) {
+ ERROR("FCONF: Can't find 'ethosn' compatible node in dtb\n");
+ return ethosn_node;
+ }
+
+ /* If the Arm Ethos-N NPU is disabled the core check can be skipped */
+ ethosn_status = fdt_node_get_status(hw_conf_dtb, ethosn_node);
+ if (ethosn_status == ETHOSN_STATUS_DISABLED) {
+ return 0;
+ }
+
+ fdt_for_each_subnode(sub_node, hw_conf_dtb, ethosn_node) {
+ int err;
+ uintptr_t addr;
+ uint8_t status;
+
+ /* Check that the sub node is "ethosn-core" compatible */
+ if (fdt_node_check_compatible(hw_conf_dtb, sub_node,
+ "ethosn-core") != 0) {
+ /* Ignore incompatible sub node */
+ continue;
+ }
+
+ /* Including disabled cores */
+ if (core_addr_idx >= ETHOSN_CORE_NUM_MAX) {
+ ERROR("FCONF: Reached max number of Arm Ethos-N NPU cores\n");
+ return -1;
+ }
+
+ status = fdt_node_get_status(hw_conf_dtb, ethosn_node);
+ if (status == ETHOSN_STATUS_DISABLED) {
+ ++core_addr_idx;
+ continue;
+ }
+
+ err = fdt_get_reg_props_by_index(hw_conf_dtb, ethosn_node,
+ core_addr_idx, &addr, NULL);
+ if (err < 0) {
+ ERROR("FCONF: Failed to read reg property for Arm Ethos-N NPU core %u\n",
+ core_addr_idx);
+ return err;
+ }
+
+ ethosn_config.core_addr[core_count++] = addr;
+ ++core_addr_idx;
+ }
+
+ if ((sub_node < 0) && (sub_node != -FDT_ERR_NOTFOUND)) {
+ ERROR("FCONF: Failed to parse sub nodes\n");
+ return sub_node;
+ }
+
+ /* The Arm Ethos-N NPU can't be used if no cores were found */
+ if (core_count == 0) {
+ ERROR("FCONF: No Arm Ethos-N NPU cores found\n");
+ return -1;
+ }
+
+ ethosn_config.num_cores = core_count;
+ ethosn_config.status = ethosn_status;
+
+ return 0;
+}
+
+FCONF_REGISTER_POPULATOR(HW_CONFIG, ethosn_config, fconf_populate_ethosn_config);
diff --git a/plat/marvell/armada/a8k/common/a8k_common.mk b/plat/marvell/armada/a8k/common/a8k_common.mk
index 8a463ea..90883f2 100644
--- a/plat/marvell/armada/a8k/common/a8k_common.mk
+++ b/plat/marvell/armada/a8k/common/a8k_common.mk
@@ -10,13 +10,14 @@
MARVELL_DRV_BASE := drivers/marvell
MARVELL_COMMON_BASE := plat/marvell/armada/common
-MARVELL_SVC_TEST := 0
+MARVELL_SVC_TEST := 0
$(eval $(call add_define,MARVELL_SVC_TEST))
ERRATA_A72_859971 := 1
# Enable MSS support for a8k family
MSS_SUPPORT := 1
+$(eval $(call add_define,MSS_SUPPORT))
# Disable EL3 cache for power management
BL31_CACHE_DISABLE := 0
@@ -112,11 +113,17 @@
$(MARVELL_DRV_BASE)/amb_adec.c \
$(MARVELL_DRV_BASE)/ccu.c \
$(MARVELL_DRV_BASE)/cache_llc.c \
- $(MARVELL_DRV_BASE)/comphy/phy-comphy-cp110.c \
- $(MARVELL_DRV_BASE)/mc_trustzone/mc_trustzone.c \
- $(MARVELL_DRV_BASE)/mg_conf_cm3/mg_conf_cm3.c \
+ $(MARVELL_DRV_BASE)/comphy/phy-comphy-cp110.c \
+ $(MARVELL_DRV_BASE)/mc_trustzone/mc_trustzone.c \
+ $(MARVELL_DRV_BASE)/secure_dfx_access/armada_thermal.c \
+ $(MARVELL_DRV_BASE)/secure_dfx_access/misc_dfx.c \
+ $(MARVELL_DRV_BASE)/ddr_phy_access.c \
drivers/rambus/trng_ip_76.c
+ifeq (${MSS_SUPPORT}, 1)
+MARVELL_DRV += $(MARVELL_DRV_BASE)/mg_conf_cm3/mg_conf_cm3.c
+endif
+
BL31_PORTING_SOURCES := $(BOARD_DIR)/board/marvell_plat_config.c
ifeq ($(SYSTEM_POWER_SUPPORT),1)
@@ -139,6 +146,8 @@
# Add trace functionality for PM
BL31_SOURCES += $(PLAT_COMMON_BASE)/plat_pm_trace.c
+
+ifeq (${MSS_SUPPORT}, 1)
# Force builds with BL2 image on a80x0 platforms
ifndef SCP_BL2
$(error "Error: SCP_BL2 image is mandatory for a8k family")
@@ -146,6 +155,7 @@
# MSS (SCP) build
include $(PLAT_COMMON_BASE)/mss/mss_a8k.mk
+endif
# BLE (ROM context execution code, AKA binary extension)
BLE_PATH ?= $(PLAT_COMMON_BASE)/ble
diff --git a/plat/marvell/armada/a8k/common/include/a8k_plat_def.h b/plat/marvell/armada/a8k/common/include/a8k_plat_def.h
index de80315..3a0fd4b 100644
--- a/plat/marvell/armada/a8k/common/include/a8k_plat_def.h
+++ b/plat/marvell/armada/a8k/common/include/a8k_plat_def.h
@@ -64,7 +64,8 @@
#define MVEBU_AP_GPIO_DATA_IN (MVEBU_AP_GPIO_REGS + 0x10)
#define MVEBU_AP_I2C_BASE (MVEBU_REGS_BASE + 0x511000)
#define MVEBU_CP0_I2C_BASE (MVEBU_CP_REGS_BASE(0) + 0x701000)
-#define MVEBU_AP_EXT_TSEN_BASE (MVEBU_RFU_BASE + 0x8084)
+#define MVEBU_AP_GEN_MGMT_BASE (MVEBU_RFU_BASE + 0x8000)
+#define MVEBU_AP_EXT_TSEN_BASE (MVEBU_AP_GEN_MGMT_BASE + 0x84)
#define MVEBU_AP_MC_TRUSTZONE_REG_LOW(ap, win) (MVEBU_REGS_BASE_AP(ap) + \
0x20080 + ((win) * 0x8))
diff --git a/plat/marvell/armada/a8k/common/mss/mss_a8k.mk b/plat/marvell/armada/a8k/common/mss/mss_a8k.mk
index d8d4921..315fc87 100644
--- a/plat/marvell/armada/a8k/common/mss/mss_a8k.mk
+++ b/plat/marvell/armada/a8k/common/mss/mss_a8k.mk
@@ -11,7 +11,8 @@
BL2_SOURCES += $(A8K_MSS_SOURCE)/mss_bl2_setup.c \
$(MARVELL_MOCHI_DRV)
-BL31_SOURCES += $(A8K_MSS_SOURCE)/mss_pm_ipc.c
+BL31_SOURCES += $(A8K_MSS_SOURCE)/mss_pm_ipc.c \
+ $(A8K_MSS_SOURCE)/mss_bl31_setup.c
PLAT_INCLUDES += -I$(A8K_MSS_SOURCE)
diff --git a/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c b/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c
index 71fa2b8..dee2d5b 100644
--- a/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c
+++ b/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c
@@ -16,7 +16,7 @@
#include <armada_common.h>
#include <marvell_plat_priv.h> /* timer functionality */
-
+#include "mss_defs.h"
#include "mss_scp_bootloader.h"
/* MSS windows configuration */
@@ -30,10 +30,6 @@
#define MSS_EXTERNAL_ADDR_MASK 0xfffffff
#define MSS_INTERNAL_ACCESS_BIT 28
-#define MSS_AP_REGS_OFFSET 0x580000
-#define MSS_CP_SRAM_OFFSET 0x220000
-#define MSS_CP_REGS_OFFSET 0x280000
-
struct addr_map_win ccu_mem_map[] = {
{MVEBU_CP_REGS_BASE(0), 0x4000000, IO_0_TID}
};
@@ -130,11 +126,7 @@
uintptr_t bl2_plat_get_cp_mss_sram(int ap_idx, int cp_idx)
{
- if (is_secure()) {
- return MVEBU_CP_REGS_BASE(cp_idx) + MSS_CP_SRAM_OFFSET;
- }
-
- return 0; /* SRAM will not be used */
+ return MVEBU_CP_REGS_BASE(cp_idx) + MSS_CP_SRAM_OFFSET;
}
uintptr_t bl2_plat_get_ap_mss_regs(int ap_idx)
diff --git a/plat/marvell/armada/a8k/common/mss/mss_bl31_setup.c b/plat/marvell/armada/a8k/common/mss/mss_bl31_setup.c
new file mode 100644
index 0000000..52a8929
--- /dev/null
+++ b/plat/marvell/armada/a8k/common/mss/mss_bl31_setup.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2021 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <platform_def.h>
+
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <lib/mmio.h>
+
+#include <armada_common.h>
+
+#include "mss_defs.h"
+
+void mss_start_cp_cm3(int cp)
+{
+ uint32_t magic;
+ uintptr_t sram = MVEBU_CP_REGS_BASE(cp) + MSS_CP_SRAM_OFFSET;
+ uintptr_t regs = MVEBU_CP_REGS_BASE(cp) + MSS_CP_REGS_OFFSET;
+
+ magic = mmio_read_32(sram);
+
+ /* Make sure the FW was loaded */
+ if (magic != MSS_FW_READY_MAGIC) {
+ return;
+ }
+
+ NOTICE("Starting CP%d MSS CPU\n", cp);
+ /* remove the magic */
+ mmio_write_32(sram, 0);
+ /* Release M3 from reset */
+ mmio_write_32(MSS_M3_RSTCR(regs),
+ (MSS_M3_RSTCR_RST_OFF << MSS_M3_RSTCR_RST_OFFSET));
+}
diff --git a/plat/marvell/armada/a8k/common/mss/mss_defs.h b/plat/marvell/armada/a8k/common/mss/mss_defs.h
new file mode 100644
index 0000000..6956461
--- /dev/null
+++ b/plat/marvell/armada/a8k/common/mss/mss_defs.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2021 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef MSS_DEFS_H
+#define MSS_DEFS_H
+
+#define MSS_DMA_SRCBR(base) (base + 0xC0)
+#define MSS_DMA_DSTBR(base) (base + 0xC4)
+#define MSS_DMA_CTRLR(base) (base + 0xC8)
+#define MSS_M3_RSTCR(base) (base + 0xFC)
+
+#define MSS_DMA_CTRLR_SIZE_OFFSET (0)
+#define MSS_DMA_CTRLR_REQ_OFFSET (15)
+#define MSS_DMA_CTRLR_REQ_SET (1)
+#define MSS_DMA_CTRLR_ACK_OFFSET (12)
+#define MSS_DMA_CTRLR_ACK_MASK (0x1)
+#define MSS_DMA_CTRLR_ACK_READY (1)
+#define MSS_M3_RSTCR_RST_OFFSET (0)
+#define MSS_M3_RSTCR_RST_OFF (1)
+
+#define MSS_FW_READY_MAGIC 0x46575144 /* FWRD */
+
+#define MSS_AP_REGS_OFFSET 0x00580000
+#define MSS_CP_SRAM_OFFSET 0x00220000
+#define MSS_CP_REGS_OFFSET 0x00280000
+
+void mss_start_cp_cm3(int cp);
+
+#endif /* MSS_DEFS_H */
diff --git a/plat/marvell/armada/a8k/common/plat_bl31_setup.c b/plat/marvell/armada/a8k/common/plat_bl31_setup.c
index 552c9b2..db85cce 100644
--- a/plat/marvell/armada/a8k/common/plat_bl31_setup.c
+++ b/plat/marvell/armada/a8k/common/plat_bl31_setup.c
@@ -16,8 +16,11 @@
#include <marvell_pm.h>
#include <mc_trustzone/mc_trustzone.h>
#include <plat_marvell.h>
+#if MSS_SUPPORT
#include <mss_ipc_drv.h>
#include <mss_mem.h>
+#include <mss_defs.h>
+#endif
/* In Armada-8k family AP806/AP807, CP0 connected to PIDI
* and CP1 connected to IHB via MCI #0
@@ -51,6 +54,7 @@
mmio_write_32(MVEBU_CP_MPP_REGS(0, 4), reg | 0x2200000);
}
+#if MSS_SUPPORT
void marvell_bl31_mss_init(void)
{
struct mss_pm_ctrl_block *mss_pm_crtl =
@@ -70,6 +74,7 @@
if (mss_pm_crtl->ipc_state == IPC_INITIALIZED)
mv_pm_ipc_init(mss_pm_crtl->ipc_base_address | MVEBU_REGS_BASE);
}
+#endif
_Bool is_pm_fw_running(void)
{
@@ -120,16 +125,22 @@
STREAM_ID_BASE + (cp * MAX_STREAM_ID_PER_CP));
marvell_bl31_mpp_init(cp);
+
+#if MSS_SUPPORT
+ /* Release CP MSS CPU from reset once the CP init is done */
+ mss_start_cp_cm3(cp);
+#endif
}
for (cp = 1; cp < CP_COUNT; cp++)
mci_link_tune(cp - 1);
+#if MSS_SUPPORT
/* initialize IPC between MSS and ATF */
if (mailbox[MBOX_IDX_MAGIC] != MVEBU_MAILBOX_MAGIC_NUM ||
mailbox[MBOX_IDX_SUSPEND_MAGIC] != MVEBU_MAILBOX_SUSPEND_STATE)
marvell_bl31_mss_init();
-
+#endif
/* Configure GPIO */
marvell_gpio_config();
diff --git a/plat/marvell/armada/a8k/common/plat_ble_setup.c b/plat/marvell/armada/a8k/common/plat_ble_setup.c
index 4114327..9c5ee15 100644
--- a/plat/marvell/armada/a8k/common/plat_ble_setup.c
+++ b/plat/marvell/armada/a8k/common/plat_ble_setup.c
@@ -14,6 +14,7 @@
#include <drivers/marvell/mochi/cp110_setup.h>
#include <armada_common.h>
+#include <efuse_def.h>
#include <mv_ddr_if.h>
#include <mvebu_def.h>
#include <plat_marvell.h>
@@ -27,7 +28,6 @@
#define MMAP_RESTORE_SAVED 1
/* SAR clock settings */
-#define MVEBU_AP_GEN_MGMT_BASE (MVEBU_RFU_BASE + 0x8000)
#define MVEBU_AP_SAR_REG_BASE(r) (MVEBU_AP_GEN_MGMT_BASE + 0x200 +\
((r) << 2))
@@ -82,11 +82,6 @@
(0x1 << AVS_SOFT_RESET_OFFSET) | \
(0x1 << AVS_ENABLE_OFFSET))
-#define MVEBU_AP_EFUSE_SRV_CTRL_REG (MVEBU_AP_GEN_MGMT_BASE + 0x8)
-#define EFUSE_SRV_CTRL_LD_SELECT_OFFS 6
-#define EFUSE_SRV_CTRL_LD_SEL_USER_MASK (1 << EFUSE_SRV_CTRL_LD_SELECT_OFFS)
-
-
/*
* - Identification information in the LD-0 eFuse:
* DRO: LD0[74:65] - Not used by the SW
@@ -96,14 +91,7 @@
* Cluster 1 PWR: LD0[193] - if set to 1, power down CPU Cluster-1
* resulting in 2 CPUs active only (7020)
*/
-#define MVEBU_AP_LD_EFUSE_BASE (MVEBU_AP_GEN_MGMT_BASE + 0xF00)
-/* Bits [94:63] - 32 data bits total */
-#define MVEBU_AP_LD0_94_63_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0x8)
-/* Bits [125:95] - 31 data bits total, 32nd bit is parity for bits [125:63] */
-#define MVEBU_AP_LD0_125_95_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0xC)
-/* Bits [220:189] - 32 data bits total */
-#define MVEBU_AP_LD0_220_189_EFUSE_OFFS (MVEBU_AP_LD_EFUSE_BASE + 0x18)
-/* Offsets for the above 2 fields combined into single 64-bit value [125:63] */
+/* Offsets for 2 efuse fields combined into single 64-bit value [125:63] */
#define EFUSE_AP_LD0_DRO_OFFS 2 /* LD0[74:65] */
#define EFUSE_AP_LD0_DRO_MASK 0x3FF
#define EFUSE_AP_LD0_REVID_OFFS 12 /* LD0[78:75] */
@@ -376,20 +364,20 @@
uint8_t avs_data_bits, min_sw_ver, svc_fields;
unsigned int ap_type;
- /* Set access to LD0 */
+ /* Get test EERPOM data */
avs_workpoint = avs_update_from_eeprom(0);
if (avs_workpoint)
goto set_aws_wp;
/* Set access to LD0 */
reg_val = mmio_read_32(MVEBU_AP_EFUSE_SRV_CTRL_REG);
- reg_val &= ~EFUSE_SRV_CTRL_LD_SELECT_OFFS;
+ reg_val &= ~EFUSE_SRV_CTRL_LD_SELECT_MASK;
mmio_write_32(MVEBU_AP_EFUSE_SRV_CTRL_REG, reg_val);
/* Obtain the value of LD0[125:63] */
- efuse = mmio_read_32(MVEBU_AP_LD0_125_95_EFUSE_OFFS);
+ efuse = mmio_read_32(MVEBU_AP_LDX_125_95_EFUSE_OFFS);
efuse <<= 32;
- efuse |= mmio_read_32(MVEBU_AP_LD0_94_63_EFUSE_OFFS);
+ efuse |= mmio_read_32(MVEBU_AP_LDX_94_63_EFUSE_OFFS);
/* SW Revision:
* Starting from SW revision 1 the SVC flow is supported.
@@ -452,7 +440,7 @@
perr[i] = 1; /* register the error */
}
- single_cluster = mmio_read_32(MVEBU_AP_LD0_220_189_EFUSE_OFFS);
+ single_cluster = mmio_read_32(MVEBU_AP_LDX_220_189_EFUSE_OFFS);
single_cluster = (single_cluster >> EFUSE_AP_LD0_CLUSTER_DOWN_OFFS) & 1;
device_id = cp110_device_id_get(MVEBU_CP_REGS_BASE(0));
diff --git a/plat/marvell/armada/a8k/common/plat_pm.c b/plat/marvell/armada/a8k/common/plat_pm.c
index 96e95c2..9ea9276 100644
--- a/plat/marvell/armada/a8k/common/plat_pm.c
+++ b/plat/marvell/armada/a8k/common/plat_pm.c
@@ -18,7 +18,9 @@
#include <armada_common.h>
#include <marvell_pm.h>
+#if MSS_SUPPORT
#include <mss_pm_ipc.h>
+#endif
#include <plat_marvell.h>
#include <plat_pm_trace.h>
@@ -396,6 +398,7 @@
/* Power up CPU (CPUs 1-3 are powered off at start of BLE) */
plat_marvell_cpu_powerup(mpidr);
+#if MSS_SUPPORT
if (is_pm_fw_running()) {
unsigned int target =
((mpidr & 0xFF) + (((mpidr >> 8) & 0xFF) * 2));
@@ -417,11 +420,12 @@
/* trace message */
PM_TRACE(TRACE_PWR_DOMAIN_ON | target);
- } else {
+ } else
+#endif
+ {
/* proprietary CPU ON exection flow */
plat_marvell_cpu_on(mpidr);
}
-
return 0;
}
@@ -441,6 +445,7 @@
*/
static void a8k_pwr_domain_off(const psci_power_state_t *target_state)
{
+#if MSS_SUPPORT
if (is_pm_fw_running()) {
unsigned int idx = plat_my_core_pos();
@@ -466,6 +471,7 @@
} else {
INFO("%s: is not supported without SCP\n", __func__);
}
+#endif
}
/* Get PM config to power off the SoC */
@@ -586,6 +592,7 @@
*/
static void a8k_pwr_domain_suspend(const psci_power_state_t *target_state)
{
+#if MSS_SUPPORT
if (is_pm_fw_running()) {
unsigned int idx;
@@ -610,7 +617,9 @@
/* trace message */
PM_TRACE(TRACE_PWR_DOMAIN_SUSPEND);
- } else {
+ } else
+#endif
+ {
uintptr_t *mailbox = (void *)PLAT_MARVELL_MAILBOX_BASE;
INFO("Suspending to RAM\n");
diff --git a/plat/marvell/armada/a8k/common/plat_pm_trace.c b/plat/marvell/armada/a8k/common/plat_pm_trace.c
index f589ff3..e02a893 100644
--- a/plat/marvell/armada/a8k/common/plat_pm_trace.c
+++ b/plat/marvell/armada/a8k/common/plat_pm_trace.c
@@ -8,10 +8,11 @@
#include <lib/mmio.h>
#include <plat/common/platform.h>
+#if MSS_SUPPORT
#include <mss_mem.h>
-#include <plat_pm_trace.h>
#ifdef PM_TRACE_ENABLE
+#include <plat_pm_trace.h>
/* core trace APIs */
core_trace_func funcTbl[PLATFORM_CORE_COUNT] = {
@@ -90,3 +91,4 @@
AP_MSS_ATF_TRACE_SIZE_MASK));
}
#endif /* PM_TRACE_ENABLE */
+#endif /* MSS_SUPPORT */
diff --git a/plat/marvell/armada/common/marvell_common.mk b/plat/marvell/armada/common/marvell_common.mk
index 04eb51c..f0e6edf 100644
--- a/plat/marvell/armada/common/marvell_common.mk
+++ b/plat/marvell/armada/common/marvell_common.mk
@@ -6,10 +6,6 @@
MARVELL_PLAT_BASE := plat/marvell/armada
MARVELL_PLAT_INCLUDE_BASE := include/plat/marvell/armada
-include plat/marvell/version.mk
-
-VERSION_STRING +=(Marvell-${SUBVERSION})
-
SEPARATE_CODE_AND_RODATA := 1
# flag to switch from PLL to ARO
diff --git a/plat/marvell/armada/common/mrvl_sip_svc.c b/plat/marvell/armada/common/mrvl_sip_svc.c
index 64187fb..c4c5c0e 100644
--- a/plat/marvell/armada/common/mrvl_sip_svc.c
+++ b/plat/marvell/armada/common/mrvl_sip_svc.c
@@ -16,6 +16,8 @@
#include <plat_marvell.h>
#include "comphy/phy-comphy-cp110.h"
+#include "secure_dfx_access/dfx.h"
+#include "ddr_phy_access.h"
#include <stdbool.h>
/* #define DEBUG_COMPHY */
@@ -37,6 +39,9 @@
#define MV_SIP_LLC_ENABLE 0x82000011
#define MV_SIP_PMU_IRQ_ENABLE 0x82000012
#define MV_SIP_PMU_IRQ_DISABLE 0x82000013
+#define MV_SIP_DFX 0x82000014
+#define MV_SIP_DDR_PHY_WRITE 0x82000015
+#define MV_SIP_DDR_PHY_READ 0x82000016
/* TRNG */
#define MV_SIP_RNG_64 0xC200FF11
@@ -45,6 +50,9 @@
#define MVEBU_COMPHY_OFFSET 0x441000
#define MVEBU_CP_BASE_MASK (~0xffffff)
+/* Common PHY register */
+#define COMPHY_TRX_TRAIN_CTRL_REG_0_OFFS 0x120a2c
+
/* This macro is used to identify COMPHY related calls from SMC function ID */
#define is_comphy_fid(fid) \
((fid) >= MV_SIP_COMPHY_POWER_ON && (fid) <= MV_SIP_COMPHY_DIG_RESET)
@@ -71,8 +79,7 @@
void *handle,
u_register_t flags)
{
- u_register_t ret;
- uint32_t w2[2] = {0, 0};
+ u_register_t ret, read, x5 = x1;
int i;
debug("%s: got SMC (0x%x) x1 0x%lx, x2 0x%lx, x3 0x%lx\n",
@@ -86,6 +93,7 @@
SMC_RET1(handle, SMC_UNK);
}
+ x5 = x1 + COMPHY_TRX_TRAIN_CTRL_REG_0_OFFS;
x1 += MVEBU_COMPHY_OFFSET;
if (x2 >= MAX_LANE_NR) {
@@ -100,7 +108,7 @@
/* Comphy related FID's */
case MV_SIP_COMPHY_POWER_ON:
/* x1: comphy_base, x2: comphy_index, x3: comphy_mode */
- ret = mvebu_cp110_comphy_power_on(x1, x2, x3);
+ ret = mvebu_cp110_comphy_power_on(x1, x2, x3, x5);
SMC_RET1(handle, ret);
case MV_SIP_COMPHY_POWER_OFF:
/* x1: comphy_base, x2: comphy_index */
@@ -136,9 +144,33 @@
mvebu_pmu_interrupt_disable();
SMC_RET1(handle, 0);
#endif
+ case MV_SIP_DFX:
+ if (x1 >= MV_SIP_DFX_THERMAL_INIT &&
+ x1 <= MV_SIP_DFX_THERMAL_SEL_CHANNEL) {
+ ret = mvebu_dfx_thermal_handle(x1, &read, x2, x3);
+ SMC_RET2(handle, ret, read);
+ }
+ if (x1 >= MV_SIP_DFX_SREAD && x1 <= MV_SIP_DFX_SWRITE) {
+ ret = mvebu_dfx_misc_handle(x1, &read, x2, x3);
+ SMC_RET2(handle, ret, read);
+ }
+
+ SMC_RET1(handle, SMC_UNK);
+ case MV_SIP_DDR_PHY_WRITE:
+ ret = mvebu_ddr_phy_write(x1, x2);
+ SMC_RET1(handle, ret);
+ case MV_SIP_DDR_PHY_READ:
+ read = 0;
+ ret = mvebu_ddr_phy_read(x1, (uint16_t *)&read);
+ SMC_RET2(handle, ret, read);
case MV_SIP_RNG_64:
- ret = eip76_rng_get_random((uint8_t *)&w2, 4 * (x1 % 2 + 1));
- SMC_RET3(handle, ret, w2[0], w2[1]);
+ if ((x1 % 2 + 1) > sizeof(read)/4) {
+ ERROR("%s: Maximum %ld random bytes per SMC call\n",
+ __func__, sizeof(read));
+ SMC_RET1(handle, SMC_UNK);
+ }
+ ret = eip76_rng_get_random((uint8_t *)&read, 4 * (x1 % 2 + 1));
+ SMC_RET2(handle, ret, read);
default:
ERROR("%s: unhandled SMC (0x%x)\n", __func__, smc_fid);
SMC_RET1(handle, SMC_UNK);
diff --git a/plat/marvell/armada/common/mss/mss_scp_bootloader.c b/plat/marvell/armada/common/mss/mss_scp_bootloader.c
index f669a77..fbede1b 100644
--- a/plat/marvell/armada/common/mss/mss_scp_bootloader.c
+++ b/plat/marvell/armada/common/mss/mss_scp_bootloader.c
@@ -19,22 +19,9 @@
#include <mss_scp_bootloader.h>
#include <mss_ipc_drv.h>
#include <mss_mem.h>
+#include <mss_defs.h>
#include <mss_scp_bl2_format.h>
-#define MSS_DMA_SRCBR(base) (base + 0xC0)
-#define MSS_DMA_DSTBR(base) (base + 0xC4)
-#define MSS_DMA_CTRLR(base) (base + 0xC8)
-#define MSS_M3_RSTCR(base) (base + 0xFC)
-
-#define MSS_DMA_CTRLR_SIZE_OFFSET (0)
-#define MSS_DMA_CTRLR_REQ_OFFSET (15)
-#define MSS_DMA_CTRLR_REQ_SET (1)
-#define MSS_DMA_CTRLR_ACK_OFFSET (12)
-#define MSS_DMA_CTRLR_ACK_MASK (0x1)
-#define MSS_DMA_CTRLR_ACK_READY (1)
-#define MSS_M3_RSTCR_RST_OFFSET (0)
-#define MSS_M3_RSTCR_RST_OFF (1)
-
#define MSS_DMA_TIMEOUT 1000
#define MSS_EXTERNAL_SPACE 0x50000000
#define MSS_EXTERNAL_ADDR_MASK 0xfffffff
@@ -85,9 +72,9 @@
/* Poll DMA_ACK at MSS_DMACTLR until it is ready */
timeout = MSS_DMA_TIMEOUT;
while (timeout > 0U) {
- if ((mmio_read_32(MSS_DMA_CTRLR(mss_regs)) >>
- (MSS_DMA_CTRLR_ACK_OFFSET &
- MSS_DMA_CTRLR_ACK_MASK))
+ if (((mmio_read_32(MSS_DMA_CTRLR(mss_regs)) >>
+ MSS_DMA_CTRLR_ACK_OFFSET) &
+ MSS_DMA_CTRLR_ACK_MASK)
== MSS_DMA_CTRLR_ACK_READY) {
break;
}
@@ -161,15 +148,20 @@
bl2_plat_configure_mss_windows(mss_regs);
- /* Wipe the MSS SRAM after using it as copy buffer */
- if (sram) {
+ if (sram != 0) {
+ /* Wipe the MSS SRAM after using it as copy buffer */
memset((void *)sram, 0, MSS_SRAM_SIZE);
+ NOTICE("CP MSS startup is postponed\n");
+ /* FW loaded, but CPU startup postponed until final CP setup */
+ mmio_write_32(sram, MSS_FW_READY_MAGIC);
+ dsb();
+ } else {
+ /* Release M3 from reset */
+ mmio_write_32(MSS_M3_RSTCR(mss_regs),
+ (MSS_M3_RSTCR_RST_OFF <<
+ MSS_M3_RSTCR_RST_OFFSET));
}
- /* Release M3 from reset */
- mmio_write_32(MSS_M3_RSTCR(mss_regs),
- (MSS_M3_RSTCR_RST_OFF << MSS_M3_RSTCR_RST_OFFSET));
-
NOTICE("Done\n");
return 0;
diff --git a/plat/marvell/version.mk b/plat/marvell/version.mk
deleted file mode 100644
index bb22255..0000000
--- a/plat/marvell/version.mk
+++ /dev/null
@@ -1 +0,0 @@
-SUBVERSION = devel-18.12.2
diff --git a/plat/mediatek/mt8192/drivers/uart/uart.h b/plat/mediatek/common/drivers/uart/uart.h
similarity index 100%
rename from plat/mediatek/mt8192/drivers/uart/uart.h
rename to plat/mediatek/common/drivers/uart/uart.h
diff --git a/plat/mediatek/mt8183/drivers/uart/uart.h b/plat/mediatek/mt8183/drivers/uart/uart.h
deleted file mode 100644
index 062ce3a..0000000
--- a/plat/mediatek/mt8183/drivers/uart/uart.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#ifndef __UART_H__
-#define __UART_H__
-
-#include <platform_def.h>
-
-/* UART HW information */
-#define HW_SUPPORT_UART_PORTS 2
-#define DRV_SUPPORT_UART_PORTS 2
-
-/* console UART clock cg */
-#define UART_CLOCK_GATE_SET (INFRACFG_AO_BASE + 0x80)
-#define UART_CLOCK_GATE_CLR (INFRACFG_AO_BASE + 0x84)
-#define UART_CLOCK_GATE_STA (INFRACFG_AO_BASE + 0x90)
-#define UART0_CLOCK_GATE_BIT (1U<<22)
-#define UART1_CLOCK_GATE_BIT (1U<<23)
-
-/* UART registers */
-#define UART_RBR(_baseaddr) (_baseaddr + 0x0)
-#define UART_THR(_baseaddr) (_baseaddr + 0x0)
-#define UART_IER(_baseaddr) (_baseaddr + 0x4)
-#define UART_IIR(_baseaddr) (_baseaddr + 0x8)
-#define UART_FCR(_baseaddr) (_baseaddr + 0x8)
-#define UART_LCR(_baseaddr) (_baseaddr + 0xc)
-#define UART_MCR(_baseaddr) (_baseaddr + 0x10)
-#define UART_LSR(_baseaddr) (_baseaddr + 0x14)
-#define UART_MSR(_baseaddr) (_baseaddr + 0x18)
-#define UART_SCR(_baseaddr) (_baseaddr + 0x1c)
-#define UART_DLL(_baseaddr) (_baseaddr + 0x0)
-#define UART_DLH(_baseaddr) (_baseaddr + 0x4)
-#define UART_EFR(_baseaddr) (_baseaddr + 0x8)
-#define UART_XON1(_baseaddr) (_baseaddr + 0x10)
-#define UART_XON2(_baseaddr) (_baseaddr + 0x14)
-#define UART_XOFF1(_baseaddr) (_baseaddr + 0x18)
-#define UART_XOFF2(_baseaddr) (_baseaddr + 0x1c)
-#define UART_AUTOBAUD(_baseaddr) (_baseaddr + 0x20)
-#define UART_HIGHSPEED(_baseaddr) (_baseaddr + 0x24)
-#define UART_SAMPLE_COUNT(_baseaddr) (_baseaddr + 0x28)
-#define UART_SAMPLE_POINT(_baseaddr) (_baseaddr + 0x2c)
-#define UART_AUTOBAUD_REG(_baseaddr) (_baseaddr + 0x30)
-#define UART_RATE_FIX_REG(_baseaddr) (_baseaddr + 0x34)
-#define UART_AUTO_BAUDSAMPLE(_baseaddr) (_baseaddr + 0x38)
-#define UART_GUARD(_baseaddr) (_baseaddr + 0x3c)
-#define UART_ESCAPE_DAT(_baseaddr) (_baseaddr + 0x40)
-#define UART_ESCAPE_EN(_baseaddr) (_baseaddr + 0x44)
-#define UART_SLEEP_EN(_baseaddr) (_baseaddr + 0x48)
-#define UART_DMA_EN(_baseaddr) (_baseaddr + 0x4c)
-#define UART_RXTRI_AD(_baseaddr) (_baseaddr + 0x50)
-#define UART_FRACDIV_L(_baseaddr) (_baseaddr + 0x54)
-#define UART_FRACDIV_M(_baseaddr) (_baseaddr + 0x58)
-#define UART_FCR_RD(_baseaddr) (_baseaddr + 0x5C)
-#define UART_USB_RX_SEL(_baseaddr) (_baseaddr + 0xB0)
-#define UART_SLEEP_REQ(_baseaddr) (_baseaddr + 0xB4)
-#define UART_SLEEP_ACK(_baseaddr) (_baseaddr + 0xB8)
-#define UART_SPM_SEL(_baseaddr) (_baseaddr + 0xBC)
-#define UART_LCR_DLAB 0x0080
-#define UART_LCR_MODE_B 0x00bf
-
-enum uart_port_ID {
- UART_PORT0 = 0,
- UART_PORT1
-};
-
-struct mt_uart_register {
- unsigned int dll;
- unsigned int dlh;
- unsigned int ier;
- unsigned int lcr;
- unsigned int mcr;
- unsigned int fcr;
- unsigned int lsr;
- unsigned int scr;
- unsigned int efr;
- unsigned int highspeed;
- unsigned int sample_count;
- unsigned int sample_point;
- unsigned int fracdiv_l;
- unsigned int fracdiv_m;
- unsigned int escape_en;
- unsigned int guard;
- unsigned int rx_sel;
-};
-
-struct mt_uart {
- unsigned long base;
- struct mt_uart_register registers;
-};
-
-/* external API */
-void mt_uart_save(void);
-void mt_uart_restore(void);
-void mt_console_uart_cg(int on);
-uint32_t mt_console_uart_cg_status(void);
-
-#endif /* __UART_H__ */
diff --git a/plat/mediatek/mt8183/platform.mk b/plat/mediatek/mt8183/platform.mk
index 07da1af..1615cf9 100644
--- a/plat/mediatek/mt8183/platform.mk
+++ b/plat/mediatek/mt8183/platform.mk
@@ -8,6 +8,7 @@
MTK_PLAT_SOC := ${MTK_PLAT}/${PLAT}
PLAT_INCLUDES := -I${MTK_PLAT}/common/ \
+ -I${MTK_PLAT}/common/drivers/uart/ \
-I${MTK_PLAT_SOC}/drivers/ \
-I${MTK_PLAT_SOC}/drivers/emi_mpu/ \
-I${MTK_PLAT_SOC}/drivers/devapc/ \
@@ -19,7 +20,6 @@
-I${MTK_PLAT_SOC}/drivers/spm/ \
-I${MTK_PLAT_SOC}/drivers/sspm/ \
-I${MTK_PLAT_SOC}/drivers/rtc/ \
- -I${MTK_PLAT_SOC}/drivers/uart/ \
-I${MTK_PLAT_SOC}/include/
PLAT_BL_COMMON_SOURCES := lib/xlat_tables/aarch64/xlat_tables.c \
diff --git a/plat/mediatek/mt8192/platform.mk b/plat/mediatek/mt8192/platform.mk
index 0b35d06..e45f649 100644
--- a/plat/mediatek/mt8192/platform.mk
+++ b/plat/mediatek/mt8192/platform.mk
@@ -8,6 +8,7 @@
MTK_PLAT_SOC := ${MTK_PLAT}/${PLAT}
PLAT_INCLUDES := -I${MTK_PLAT}/common/ \
+ -I${MTK_PLAT}/common/drivers/uart/ \
-I${MTK_PLAT}/common/lpm/ \
-I${MTK_PLAT_SOC}/include/ \
-I${MTK_PLAT_SOC}/drivers/ \
@@ -19,8 +20,7 @@
-I${MTK_PLAT_SOC}/drivers/ptp3/ \
-I${MTK_PLAT_SOC}/drivers/rtc/ \
-I${MTK_PLAT_SOC}/drivers/spmc/ \
- -I${MTK_PLAT_SOC}/drivers/timer/ \
- -I${MTK_PLAT_SOC}/drivers/uart/
+ -I${MTK_PLAT_SOC}/drivers/timer/
GICV3_SUPPORT_GIC600 := 1
include drivers/arm/gic/v3/gicv3.mk
diff --git a/services/std_svc/spm_mm/spm_mm_setup.c b/services/std_svc/spm_mm/spm_mm_setup.c
index 32562c3..9d681c2 100644
--- a/services/std_svc/spm_mm/spm_mm_setup.c
+++ b/services/std_svc/spm_mm/spm_mm_setup.c
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2021, NVIDIA Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -26,6 +27,10 @@
{
cpu_context_t *ctx = &(sp_ctx->cpu_ctx);
+ /* Pointer to the MP information from the platform port. */
+ const spm_mm_boot_info_t *sp_boot_info =
+ plat_get_secure_partition_boot_info(NULL);
+
/*
* Initialize CPU context
* ----------------------
@@ -36,7 +41,7 @@
SET_PARAM_HEAD(&ep_info, PARAM_EP, VERSION_1, SECURE | EP_ST_ENABLE);
/* Setup entrypoint and SPSR */
- ep_info.pc = BL32_BASE;
+ ep_info.pc = sp_boot_info->sp_image_base;
ep_info.spsr = SPSR_64(MODE_EL0, MODE_SP_EL0, DISABLE_ALL_EXCEPTIONS);
/*
@@ -53,8 +58,8 @@
*
* X4 to X7 = 0
*/
- ep_info.args.arg0 = PLAT_SPM_BUF_BASE;
- ep_info.args.arg1 = PLAT_SPM_BUF_SIZE;
+ ep_info.args.arg0 = sp_boot_info->sp_shared_buf_base;
+ ep_info.args.arg1 = sp_boot_info->sp_shared_buf_size;
ep_info.args.arg2 = PLAT_SPM_COOKIE_0;
ep_info.args.arg3 = PLAT_SPM_COOKIE_1;
@@ -66,7 +71,7 @@
* implementation defined means. The value will be 0 otherwise.
*/
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_SP_EL0,
- PLAT_SP_IMAGE_STACK_BASE + PLAT_SP_IMAGE_STACK_PCPU_SIZE);
+ sp_boot_info->sp_stack_base + sp_boot_info->sp_pcpu_stack_size);
/*
* Setup translation tables
@@ -84,10 +89,10 @@
unsigned int max_granule_mask = max_granule - 1U;
/* Base must be aligned to the max granularity */
- assert((PLAT_SP_IMAGE_NS_BUF_BASE & max_granule_mask) == 0);
+ assert((sp_boot_info->sp_ns_comm_buf_base & max_granule_mask) == 0);
/* Size must be a multiple of the max granularity */
- assert((PLAT_SP_IMAGE_NS_BUF_SIZE & max_granule_mask) == 0);
+ assert((sp_boot_info->sp_ns_comm_buf_size & max_granule_mask) == 0);
#endif /* ENABLE_ASSERTIONS */
@@ -191,16 +196,14 @@
* ----------------------------------------------------------
*/
- void *shared_buf_ptr = (void *) PLAT_SPM_BUF_BASE;
+ void *shared_buf_ptr = (void *) sp_boot_info->sp_shared_buf_base;
/* Copy the boot information into the shared buffer with the SP. */
assert((uintptr_t)shared_buf_ptr + sizeof(spm_mm_boot_info_t)
- <= (PLAT_SPM_BUF_BASE + PLAT_SPM_BUF_SIZE));
+ <= (sp_boot_info->sp_shared_buf_base + sp_boot_info->sp_shared_buf_size));
- assert(PLAT_SPM_BUF_BASE <= (UINTPTR_MAX - PLAT_SPM_BUF_SIZE + 1));
-
- const spm_mm_boot_info_t *sp_boot_info =
- plat_get_secure_partition_boot_info(NULL);
+ assert(sp_boot_info->sp_shared_buf_base <=
+ (UINTPTR_MAX - sp_boot_info->sp_shared_buf_size + 1));
assert(sp_boot_info != NULL);
@@ -234,7 +237,7 @@
assert(sp_boot_info->num_cpus <= PLATFORM_CORE_COUNT);
assert((uintptr_t)shared_buf_ptr
- <= (PLAT_SPM_BUF_BASE + PLAT_SPM_BUF_SIZE -
+ <= (sp_boot_info->sp_shared_buf_base + sp_boot_info->sp_shared_buf_size -
(sp_boot_info->num_cpus * sizeof(*sp_mp_info))));
memcpy(shared_buf_ptr, (const void *) sp_mp_info,