rpi3: console: Use same "clock-less" setup scheme as RPi4
In the wake of the upcoming unification of the console setup code
between RPi3 and RPi4, extend the "clock-less" setup scheme to the
RPi3. This avoid programming any clocks or baud rate registers,
which makes the port more robust against GPU firmware changes.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Ida83a963bb18a878997e9cbd55f8ceac6a2e1c1f
diff --git a/plat/rpi/common/include/rpi_shared.h b/plat/rpi/common/include/rpi_shared.h
index de83571..6863438 100644
--- a/plat/rpi/common/include/rpi_shared.h
+++ b/plat/rpi/common/include/rpi_shared.h
@@ -14,7 +14,7 @@
******************************************************************************/
/* Utility functions */
-void rpi3_console_init(unsigned int base_clk_rate);
+void rpi3_console_init(void);
void rpi3_setup_page_tables(uintptr_t total_base, size_t total_size,
uintptr_t code_start, uintptr_t code_limit,
uintptr_t rodata_start, uintptr_t rodata_limit
diff --git a/plat/rpi/common/rpi3_common.c b/plat/rpi/common/rpi3_common.c
index 27281f2..ba81ddb 100644
--- a/plat/rpi/common/rpi3_common.c
+++ b/plat/rpi/common/rpi3_common.c
@@ -104,16 +104,19 @@
******************************************************************************/
static console_t rpi3_console;
-void rpi3_console_init(unsigned int base_clk_rate)
+void rpi3_console_init(void)
{
int console_scope = CONSOLE_FLAG_BOOT;
-#if RPI3_RUNTIME_UART != -1
- console_scope |= CONSOLE_FLAG_RUNTIME;
-#endif
- int rc = console_16550_register(PLAT_RPI3_UART_BASE,
- base_clk_rate,
- PLAT_RPI3_UART_BAUDRATE,
- &rpi3_console);
+ int rc;
+
+ if (RPI3_RUNTIME_UART != -1)
+ console_scope |= CONSOLE_FLAG_RUNTIME;
+
+ rc = console_16550_register(PLAT_RPI_MINI_UART_BASE,
+ 0,
+ PLAT_RPI_UART_BAUDRATE,
+ &rpi3_console);
+
if (rc == 0) {
/*
* The crash console doesn't use the multi console API, it uses
diff --git a/plat/rpi/rpi3/aarch64/plat_helpers.S b/plat/rpi/rpi3/aarch64/plat_helpers.S
index 24278bd..ab925b6 100644
--- a/plat/rpi/rpi3/aarch64/plat_helpers.S
+++ b/plat/rpi/rpi3/aarch64/plat_helpers.S
@@ -9,8 +9,6 @@
#include <assert_macros.S>
#include <platform_def.h>
-#include "../include/rpi_hw.h"
-
.globl plat_crash_console_flush
.globl plat_crash_console_init
.globl plat_crash_console_putc
@@ -133,9 +131,9 @@
* ---------------------------------------------
*/
func plat_crash_console_init
- mov_imm x0, PLAT_RPI3_UART_BASE
- mov_imm x1, PLAT_RPI3_UART_CLK_IN_HZ
- mov_imm x2, PLAT_RPI3_UART_BAUDRATE
+ mov_imm x0, PLAT_RPI_MINI_UART_BASE
+ mov x1, xzr
+ mov x2, xzr
b console_16550_core_init
endfunc plat_crash_console_init
@@ -147,7 +145,7 @@
* ---------------------------------------------
*/
func plat_crash_console_putc
- mov_imm x1, PLAT_RPI3_UART_BASE
+ mov_imm x1, PLAT_RPI_MINI_UART_BASE
b console_16550_core_putc
endfunc plat_crash_console_putc
@@ -160,6 +158,6 @@
* ---------------------------------------------
*/
func plat_crash_console_flush
- mov_imm x0, PLAT_RPI3_UART_BASE
+ mov_imm x0, PLAT_RPI_MINI_UART_BASE
b console_16550_core_flush
endfunc plat_crash_console_flush
diff --git a/plat/rpi/rpi3/include/platform_def.h b/plat/rpi/rpi3/include/platform_def.h
index e308f70..854da8f 100644
--- a/plat/rpi/rpi3/include/platform_def.h
+++ b/plat/rpi/rpi3/include/platform_def.h
@@ -249,9 +249,8 @@
/*
* Serial-related constants.
*/
-#define PLAT_RPI3_UART_BASE RPI3_MINI_UART_BASE
-#define PLAT_RPI3_UART_CLK_IN_HZ RPI3_MINI_UART_CLK_IN_HZ
-#define PLAT_RPI3_UART_BAUDRATE ULL(115200)
+#define PLAT_RPI_MINI_UART_BASE RPI3_MINI_UART_BASE
+#define PLAT_RPI_UART_BAUDRATE ULL(115200)
/*
* System counter
diff --git a/plat/rpi/rpi3/include/rpi_hw.h b/plat/rpi/rpi3/include/rpi_hw.h
index 01d5b4a..60ecf0d 100644
--- a/plat/rpi/rpi3/include/rpi_hw.h
+++ b/plat/rpi/rpi3/include/rpi_hw.h
@@ -81,7 +81,6 @@
*/
#define RPI3_IO_MINI_UART_OFFSET ULL(0x00215040)
#define RPI3_MINI_UART_BASE (RPI_IO_BASE + RPI3_IO_MINI_UART_OFFSET)
-#define RPI3_MINI_UART_CLK_IN_HZ ULL(500000000)
/*
* GPIO controller
diff --git a/plat/rpi/rpi3/rpi3_bl1_setup.c b/plat/rpi/rpi3/rpi3_bl1_setup.c
index dcce76e..3ac30e0 100644
--- a/plat/rpi/rpi3/rpi3_bl1_setup.c
+++ b/plat/rpi/rpi3/rpi3_bl1_setup.c
@@ -35,7 +35,7 @@
0x80000000);
/* Initialize the console to provide early debug support */
- rpi3_console_init(PLAT_RPI3_UART_CLK_IN_HZ);
+ rpi3_console_init();
/* Allow BL1 to see the whole Trusted RAM */
bl1_tzram_layout.total_base = BL_RAM_BASE;
diff --git a/plat/rpi/rpi3/rpi3_bl2_setup.c b/plat/rpi/rpi3/rpi3_bl2_setup.c
index d64235a..db71817 100644
--- a/plat/rpi/rpi3/rpi3_bl2_setup.c
+++ b/plat/rpi/rpi3/rpi3_bl2_setup.c
@@ -51,7 +51,7 @@
meminfo_t *mem_layout = (meminfo_t *) arg1;
/* Initialize the console to provide early debug support */
- rpi3_console_init(PLAT_RPI3_UART_CLK_IN_HZ);
+ rpi3_console_init();
/* Enable arch timer */
generic_delay_timer_init();
diff --git a/plat/rpi/rpi3/rpi3_bl31_setup.c b/plat/rpi/rpi3/rpi3_bl31_setup.c
index 24a5613..5915753 100644
--- a/plat/rpi/rpi3/rpi3_bl31_setup.c
+++ b/plat/rpi/rpi3/rpi3_bl31_setup.c
@@ -72,7 +72,7 @@
{
/* Initialize the console to provide early debug support */
- rpi3_console_init(PLAT_RPI3_UART_CLK_IN_HZ);
+ rpi3_console_init();
/*
* In debug builds, a special value is passed in 'arg1' to verify
diff --git a/plat/rpi/rpi4/aarch64/plat_helpers.S b/plat/rpi/rpi4/aarch64/plat_helpers.S
index 083c30e..fac1b20 100644
--- a/plat/rpi/rpi4/aarch64/plat_helpers.S
+++ b/plat/rpi/rpi4/aarch64/plat_helpers.S
@@ -10,8 +10,6 @@
#include <platform_def.h>
#include <cortex_a72.h>
-#include "../include/rpi_hw.h"
-
.globl plat_crash_console_flush
.globl plat_crash_console_init
.globl plat_crash_console_putc
@@ -135,7 +133,7 @@
* ---------------------------------------------
*/
func plat_crash_console_init
- mov_imm x0, PLAT_RPI3_UART_BASE
+ mov_imm x0, PLAT_RPI_MINI_UART_BASE
mov x1, xzr
mov x2, xzr
b console_16550_core_init
@@ -149,7 +147,7 @@
* ---------------------------------------------
*/
func plat_crash_console_putc
- mov_imm x1, PLAT_RPI3_UART_BASE
+ mov_imm x1, PLAT_RPI_MINI_UART_BASE
b console_16550_core_putc
endfunc plat_crash_console_putc
@@ -162,7 +160,7 @@
* ---------------------------------------------
*/
func plat_crash_console_flush
- mov_imm x0, PLAT_RPI3_UART_BASE
+ mov_imm x0, PLAT_RPI_MINI_UART_BASE
b console_16550_core_flush
endfunc plat_crash_console_flush
diff --git a/plat/rpi/rpi4/include/platform_def.h b/plat/rpi/rpi4/include/platform_def.h
index a9ecdba..e5d5aba 100644
--- a/plat/rpi/rpi4/include/platform_def.h
+++ b/plat/rpi/rpi4/include/platform_def.h
@@ -126,8 +126,8 @@
/*
* Serial-related constants.
*/
-#define PLAT_RPI3_UART_BASE RPI3_MINI_UART_BASE
-#define PLAT_RPI3_UART_BAUDRATE ULL(115200)
+#define PLAT_RPI_MINI_UART_BASE RPI4_MINI_UART_BASE
+#define PLAT_RPI_UART_BAUDRATE ULL(115200)
/*
* System counter
diff --git a/plat/rpi/rpi4/include/rpi_hw.h b/plat/rpi/rpi4/include/rpi_hw.h
index b1dd4e9..e46b0de 100644
--- a/plat/rpi/rpi4/include/rpi_hw.h
+++ b/plat/rpi/rpi4/include/rpi_hw.h
@@ -79,8 +79,8 @@
/*
* Serial port (called 'Mini UART' in the Broadcom documentation).
*/
-#define RPI3_IO_MINI_UART_OFFSET ULL(0x00215040)
-#define RPI3_MINI_UART_BASE (RPI_IO_BASE + RPI3_IO_MINI_UART_OFFSET)
+#define RPI4_IO_MINI_UART_OFFSET ULL(0x00215040)
+#define RPI4_MINI_UART_BASE (RPI_IO_BASE + RPI4_IO_MINI_UART_OFFSET)
/*
* GPIO controller
diff --git a/plat/rpi/rpi4/rpi4_bl31_setup.c b/plat/rpi/rpi4/rpi4_bl31_setup.c
index 9e3b539..0a49d81 100644
--- a/plat/rpi/rpi4/rpi4_bl31_setup.c
+++ b/plat/rpi/rpi4/rpi4_bl31_setup.c
@@ -132,14 +132,8 @@
/* Early GPU firmware revisions need a little break here. */
ldelay(100000);
- /*
- * Initialize the console to provide early debug support.
- * We rely on the GPU firmware to have initialised the UART correctly,
- * as the baud base clock rate differs across GPU firmware revisions.
- * Providing a base clock of 0 lets the 16550 UART init routine skip
- * the initial enablement and baud rate setup.
- */
- rpi3_console_init(0);
+ /* Initialize the console to provide early debug support. */
+ rpi3_console_init();
bl33_image_ep_info.pc = plat_get_ns_image_entrypoint();
bl33_image_ep_info.spsr = rpi3_get_spsr_for_bl33_entry();