diff --git a/fdts/stm32mp157c-lxa-mc1.dts b/fdts/stm32mp157c-lxa-mc1.dts
new file mode 100644
index 0000000..7b8e481
--- /dev/null
+++ b/fdts/stm32mp157c-lxa-mc1.dts
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
+#include "stm32mp15xx-osd32.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+
+/ {
+	model = "Linux Automation MC-1 board";
+	compatible = "lxa,stm32mp157c-mc1", "oct,stm32mp15xx-osd32", "st,stm32mp157";
+
+	aliases {
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	led-act {
+		compatible = "gpio-leds";
+
+		led-green {
+			label = "mc1:green:act";
+			gpios = <&gpioa 13 1>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v3: regulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&v3v3>;
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	bus-width = <4>;
+	cd-gpios = <&gpioh 3 1>;
+	disable-wp;
+	no-1-8-v;
+	st,neg-edge;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&sdmmc1_b4_pins_a {
+	/*
+	 * board lacks external pull-ups on SDMMC lines. Class 10 SD refuses to
+	 * work, thus enable internal pull-ups.
+	 */
+	pins1 {
+		/delete-property/ bias-disable;
+		bias-pull-up;
+	};
+	pins2 {
+		/delete-property/ bias-disable;
+		bias-pull-up;
+	};
+};
+
+&sdmmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &mc1_sdmmc2_d47_pins_b>;
+	bus-width = <8>;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	mc1_sdmmc2_d47_pins_b: mc1-sdmmc2-d47-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>,  /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+};
diff --git a/fdts/stm32mp15xx-osd32.dtsi b/fdts/stm32mp15xx-osd32.dtsi
new file mode 100644
index 0000000..76a2561
--- /dev/null
+++ b/fdts/stm32mp15xx-osd32.dtsi
@@ -0,0 +1,281 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
+ */
+
+#include "stm32mp15-pinctrl.dtsi"
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdda: ldo5 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+			};
+
+			v1v2_hdmi: ldo6 {
+				regulator-name = "v1v2_hdmi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				regulator-active-discharge;
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				regulator-active-discharge;
+			};
+		};
+
+		pmic_watchdog: watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+/* ATF Specific */
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+
+/ {
+	aliases {
+		gpio0 = &gpioa;
+		gpio1 = &gpiob;
+		gpio2 = &gpioc;
+		gpio3 = &gpiod;
+		gpio4 = &gpioe;
+		gpio5 = &gpiof;
+		gpio6 = &gpiog;
+		gpio7 = &gpioh;
+		gpio8 = &gpioi;
+		gpio25 = &gpioz;
+		i2c3 = &i2c4;
+	};
+};
+
+&bsec {
+	board_id: board_id@ec {
+		reg = <0xec 0x4>;
+		st,non-secure-otp;
+	};
+};
+
+&clk_hse {
+	st,digbypass;
+};
+
+&cpu0{
+	cpu-supply = <&vddcore>;
+};
+
+&cpu1{
+	cpu-supply = <&vddcore>;
+};
+
+&hash1 {
+	status = "okay";
+};
+
+/* CLOCK init */
+&rcc {
+	secure-status = "disabled";
+	st,clksrc = <
+		CLK_MPU_PLL1P
+		CLK_AXI_PLL2P
+		CLK_MCU_PLL3P
+		CLK_PLL12_HSE
+		CLK_PLL3_HSE
+		CLK_PLL4_HSE
+		CLK_RTC_LSE
+		CLK_MCO1_DISABLED
+		CLK_MCO2_DISABLED
+	>;
+
+	st,clkdiv = <
+		1 /*MPU*/
+		0 /*AXI*/
+		0 /*MCU*/
+		1 /*APB1*/
+		1 /*APB2*/
+		1 /*APB3*/
+		1 /*APB4*/
+		2 /*APB5*/
+		23 /*RTC*/
+		0 /*MCO1*/
+		0 /*MCO2*/
+	>;
+
+	st,pkcs = <
+		CLK_CKPER_HSE
+		CLK_FMC_ACLK
+		CLK_QSPI_ACLK
+		CLK_ETH_PLL4P
+		CLK_SDMMC12_PLL4P
+		CLK_DSI_DSIPLL
+		CLK_STGEN_HSE
+		CLK_USBPHY_HSE
+		CLK_SPI2S1_PLL3Q
+		CLK_SPI2S23_PLL3Q
+		CLK_SPI45_HSI
+		CLK_SPI6_HSI
+		CLK_I2C46_HSI
+		CLK_SDMMC3_PLL4P
+		CLK_USBO_USBPHY
+		CLK_ADC_CKPER
+		CLK_CEC_LSE
+		CLK_I2C12_HSI
+		CLK_I2C35_HSI
+		CLK_UART1_HSI
+		CLK_UART24_HSI
+		CLK_UART35_HSI
+		CLK_UART6_HSI
+		CLK_UART78_HSI
+		CLK_SPDIF_PLL4P
+		CLK_FDCAN_PLL4R
+		CLK_SAI1_PLL3Q
+		CLK_SAI2_PLL3Q
+		CLK_SAI3_PLL3Q
+		CLK_SAI4_PLL3Q
+		CLK_RNG1_LSI
+		CLK_RNG2_LSI
+		CLK_LPTIM1_PCLK1
+		CLK_LPTIM23_PCLK3
+		CLK_LPTIM45_LSE
+	>;
+
+	/* VCO = 1300.0 MHz => P = 650 (CPU) */
+	pll1: st,pll@0 {
+		compatible = "st,stm32mp1-pll";
+		reg = <0>;
+		cfg = < 2 80 0 0 0 PQR(1,0,0) >;
+		frac = < 0x800 >;
+	};
+
+	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+	pll2: st,pll@1 {
+		compatible = "st,stm32mp1-pll";
+		reg = <1>;
+		cfg = <2 65 1 0 0 PQR(1,1,1)>;
+		frac = <0x1400>;
+	};
+
+	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+	pll3: st,pll@2 {
+		compatible = "st,stm32mp1-pll";
+		reg = <2>;
+		cfg = <1 33 1 16 36 PQR(1,1,1)>;
+		frac = <0x1a04>;
+	};
+
+	/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
+	pll4: st,pll@3 {
+		compatible = "st,stm32mp1-pll";
+		reg = <3>;
+		cfg = <3 98 5 7 7 PQR(1,1,1)>;
+	};
+};
diff --git a/plat/qemu/common/aarch64/plat_helpers.S b/plat/qemu/common/aarch64/plat_helpers.S
index b546173..08b2817 100644
--- a/plat/qemu/common/aarch64/plat_helpers.S
+++ b/plat/qemu/common/aarch64/plat_helpers.S
@@ -32,7 +32,8 @@
 func plat_qemu_calc_core_pos
 	and	x1, x0, #MPIDR_CPU_MASK
 	and	x0, x0, #MPIDR_CLUSTER_MASK
-	add	x0, x1, x0, LSR #6
+	add	x0, x1, x0, LSR #(MPIDR_AFFINITY_BITS -\
+				  PLATFORM_CPU_PER_CLUSTER_SHIFT)
 	ret
 endfunc plat_qemu_calc_core_pos
 
diff --git a/plat/qemu/common/qemu_common.c b/plat/qemu/common/qemu_common.c
index 7d2730d..47ec791 100644
--- a/plat/qemu/common/qemu_common.c
+++ b/plat/qemu/common/qemu_common.c
@@ -26,7 +26,7 @@
 #ifdef DEVICE2_BASE
 #define MAP_DEVICE2	MAP_REGION_FLAT(DEVICE2_BASE,			\
 					DEVICE2_SIZE,			\
-					MT_DEVICE | MT_RO | MT_SECURE)
+					MT_DEVICE | MT_RW | MT_SECURE)
 #endif
 
 #define MAP_SHARED_RAM	MAP_REGION_FLAT(SHARED_RAM_BASE,		\
@@ -93,6 +93,9 @@
 #ifdef MAP_DEVICE1
 	MAP_DEVICE1,
 #endif
+#ifdef MAP_DEVICE2
+	MAP_DEVICE2,
+#endif
 #if SPM_MM
 	MAP_NS_DRAM0,
 	QEMU_SPM_BUF_EL3_MMAP,
@@ -109,6 +112,9 @@
 #ifdef MAP_DEVICE1
 	MAP_DEVICE1,
 #endif
+#ifdef MAP_DEVICE2
+	MAP_DEVICE2,
+#endif
 	{0}
 };
 #endif
diff --git a/plat/qemu/qemu/include/platform_def.h b/plat/qemu/qemu/include/platform_def.h
index ed4b748..e6bb1e6 100644
--- a/plat/qemu/qemu/include/platform_def.h
+++ b/plat/qemu/qemu/include/platform_def.h
@@ -24,6 +24,14 @@
 #define PLATFORM_CLUSTER1_CORE_COUNT	U(0)
 #else
 #define PLATFORM_MAX_CPUS_PER_CLUSTER	U(4)
+/*
+ * Define the number of cores per cluster used in calculating core position.
+ * The cluster number is shifted by this value and added to the core ID,
+ * so its value represents log2(cores/cluster).
+ * Default is 2**(2) = 4 cores per cluster.
+ */
+#define PLATFORM_CPU_PER_CLUSTER_SHIFT	U(2)
+
 #define PLATFORM_CLUSTER_COUNT		U(2)
 #define PLATFORM_CLUSTER0_CORE_COUNT	PLATFORM_MAX_CPUS_PER_CLUSTER
 #define PLATFORM_CLUSTER1_CORE_COUNT	PLATFORM_MAX_CPUS_PER_CLUSTER
diff --git a/plat/qemu/qemu_sbsa/include/platform_def.h b/plat/qemu/qemu_sbsa/include/platform_def.h
index db394c0..b69c2eb 100644
--- a/plat/qemu/qemu_sbsa/include/platform_def.h
+++ b/plat/qemu/qemu_sbsa/include/platform_def.h
@@ -16,13 +16,17 @@
 
 #define PLATFORM_STACK_SIZE		0x1000
 
-#define PLATFORM_MAX_CPUS_PER_CLUSTER	U(4)
-#define PLATFORM_CLUSTER_COUNT		U(2)
-#define PLATFORM_CLUSTER0_CORE_COUNT	PLATFORM_MAX_CPUS_PER_CLUSTER
-#define PLATFORM_CLUSTER1_CORE_COUNT	PLATFORM_MAX_CPUS_PER_CLUSTER
-#define PLATFORM_CORE_COUNT		(PLATFORM_CLUSTER0_CORE_COUNT + \
-					 PLATFORM_CLUSTER1_CORE_COUNT)
-
+#define PLATFORM_MAX_CPUS_PER_CLUSTER	U(8)
+/*
+ * Define the number of cores per cluster used in calculating core position.
+ * The cluster number is shifted by this value and added to the core ID,
+ * so its value represents log2(cores/cluster).
+ * Default is 2**(3) = 8 cores per cluster.
+ */
+#define PLATFORM_CPU_PER_CLUSTER_SHIFT	U(3)
+#define PLATFORM_CLUSTER_COUNT		U(64)
+#define PLATFORM_CORE_COUNT		(PLATFORM_CLUSTER_COUNT * \
+					PLATFORM_MAX_CPUS_PER_CLUSTER)
 #define QEMU_PRIMARY_CPU		U(0)
 
 #define PLAT_NUM_PWR_DOMAINS		(PLATFORM_CLUSTER_COUNT + \
@@ -130,7 +134,7 @@
  * Put BL3-1 at the top of the Trusted SRAM. BL31_BASE is calculated using the
  * current BL3-1 debug size plus a little space for growth.
  */
-#define BL31_SIZE			0x50000
+#define BL31_SIZE			0x300000
 #define BL31_BASE			(BL31_LIMIT - BL31_SIZE)
 #define BL31_LIMIT			(BL1_RW_BASE)
 #define BL31_PROGBITS_LIMIT		BL1_RW_BASE
@@ -157,10 +161,10 @@
 #define PLAT_VIRT_ADDR_SPACE_SIZE	(1ull << 42)
 #if SPM_MM
 #define MAX_MMAP_REGIONS		12
-#define MAX_XLAT_TABLES			11
+#define MAX_XLAT_TABLES			12
 #else
 #define MAX_MMAP_REGIONS		11
-#define MAX_XLAT_TABLES			10
+#define MAX_XLAT_TABLES			11
 #endif
 #define MAX_IO_DEVICES			3
 #define MAX_IO_HANDLES			4
@@ -203,7 +207,10 @@
 #define DEVICE0_SIZE			0x04080000
 /* This is map from NORMAL_UART up to SECURE_UART_MM */
 #define DEVICE1_BASE			0x60000000
-#define DEVICE1_SIZE			0x00041000
+#define DEVICE1_SIZE			0x10041000
+/* This is a map for SECURE_EC */
+#define DEVICE2_BASE			0x50000000
+#define DEVICE2_SIZE			0x00001000
 
 /*
  * GIC related constants
diff --git a/plat/qemu/qemu_sbsa/platform.mk b/plat/qemu/qemu_sbsa/platform.mk
index 98d1347..d45f3f1 100644
--- a/plat/qemu/qemu_sbsa/platform.mk
+++ b/plat/qemu/qemu_sbsa/platform.mk
@@ -79,8 +79,8 @@
 				lib/semihosting/semihosting.c			\
 				lib/semihosting/${ARCH}/semihosting_call.S	\
 				plat/common/plat_psci_common.c			\
-				${PLAT_QEMU_COMMON_PATH}/qemu_pm.c		\
-				${PLAT_QEMU_COMMON_PATH}/topology.c		\
+				${PLAT_QEMU_PATH}/sbsa_pm.c			\
+				${PLAT_QEMU_PATH}/sbsa_topology.c		\
 				${PLAT_QEMU_COMMON_PATH}/aarch64/plat_helpers.S	\
 				${PLAT_QEMU_COMMON_PATH}/qemu_bl31_setup.c	\
 				common/fdt_fixup.c				\
diff --git a/plat/qemu/qemu_sbsa/sbsa_pm.c b/plat/qemu/qemu_sbsa/sbsa_pm.c
new file mode 100644
index 0000000..8d1e1d4
--- /dev/null
+++ b/plat/qemu/qemu_sbsa/sbsa_pm.c
@@ -0,0 +1,237 @@
+/*
+ * Copyright (c) 2020, Nuvia Inc
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <lib/mmio.h>
+#include <lib/psci/psci.h>
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+#include "sbsa_private.h"
+
+#define ADP_STOPPED_APPLICATION_EXIT 0x20026
+
+/*
+ * Define offset and commands for the fake EC device
+ */
+#define SBSA_SECURE_EC_OFFSET 0x50000000
+
+#define SBSA_SECURE_EC_CMD_SHUTDOWN 0x01
+#define SBSA_SECURE_EC_CMD_REBOOT   0x02
+
+/*
+ * The secure entry point to be used on warm reset.
+ */
+static unsigned long secure_entrypoint;
+
+/* Make composite power state parameter till power level 0 */
+#if PSCI_EXTENDED_STATE_ID
+
+#define qemu_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
+		(((lvl0_state) << PSTATE_ID_SHIFT) | \
+		 ((type) << PSTATE_TYPE_SHIFT))
+#else
+#define qemu_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
+		(((lvl0_state) << PSTATE_ID_SHIFT) | \
+		 ((pwr_lvl) << PSTATE_PWR_LVL_SHIFT) | \
+		 ((type) << PSTATE_TYPE_SHIFT))
+#endif /* PSCI_EXTENDED_STATE_ID */
+
+
+#define qemu_make_pwrstate_lvl1(lvl1_state, lvl0_state, pwr_lvl, type) \
+		(((lvl1_state) << PLAT_LOCAL_PSTATE_WIDTH) | \
+		 qemu_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type))
+
+
+
+/*
+ *  The table storing the valid idle power states. Ensure that the
+ *  array entries are populated in ascending order of state-id to
+ *  enable us to use binary search during power state validation.
+ *  The table must be terminated by a NULL entry.
+ */
+static const unsigned int qemu_pm_idle_states[] = {
+	/* State-id - 0x01 */
+	qemu_make_pwrstate_lvl1(PLAT_LOCAL_STATE_RUN, PLAT_LOCAL_STATE_RET,
+				MPIDR_AFFLVL0, PSTATE_TYPE_STANDBY),
+	/* State-id - 0x02 */
+	qemu_make_pwrstate_lvl1(PLAT_LOCAL_STATE_RUN, PLAT_LOCAL_STATE_OFF,
+				MPIDR_AFFLVL0, PSTATE_TYPE_POWERDOWN),
+	/* State-id - 0x22 */
+	qemu_make_pwrstate_lvl1(PLAT_LOCAL_STATE_OFF, PLAT_LOCAL_STATE_OFF,
+				MPIDR_AFFLVL1, PSTATE_TYPE_POWERDOWN),
+	0
+};
+
+/*******************************************************************************
+ * Platform handler called to check the validity of the power state
+ * parameter. The power state parameter has to be a composite power state.
+ ******************************************************************************/
+static int qemu_validate_power_state(unsigned int power_state,
+				psci_power_state_t *req_state)
+{
+	unsigned int state_id;
+	unsigned int i;
+
+	assert(req_state != NULL);
+
+	/*
+	 *  Currently we are using a linear search for finding the matching
+	 *  entry in the idle power state array. This can be made a binary
+	 *  search if the number of entries justifies the additional complexity.
+	 */
+	for (i = 0U; qemu_pm_idle_states[i] != 0U; i++) {
+		if (power_state == qemu_pm_idle_states[i]) {
+			break;
+		}
+	}
+
+	/* Return error if entry not found in the idle state array */
+	if (qemu_pm_idle_states[i] == 0U) {
+		return PSCI_E_INVALID_PARAMS;
+	}
+
+	i = 0U;
+	state_id = psci_get_pstate_id(power_state);
+
+	/* Parse the State ID and populate the state info parameter */
+	while (state_id != 0U) {
+		req_state->pwr_domain_state[i++] = state_id &
+						PLAT_LOCAL_PSTATE_MASK;
+		state_id >>= PLAT_LOCAL_PSTATE_WIDTH;
+	}
+
+	return PSCI_E_SUCCESS;
+}
+
+/*******************************************************************************
+ * Platform handler called when a CPU is about to enter standby.
+ ******************************************************************************/
+static void qemu_cpu_standby(plat_local_state_t cpu_state)
+{
+
+	assert(cpu_state == PLAT_LOCAL_STATE_RET);
+
+	/*
+	 * Enter standby state
+	 * dsb is good practice before using wfi to enter low power states
+	 */
+	dsb();
+	wfi();
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be turned on. The
+ * mpidr determines the CPU to be turned on.
+ ******************************************************************************/
+static int qemu_pwr_domain_on(u_register_t mpidr)
+{
+	int pos = plat_core_pos_by_mpidr(mpidr);
+	uint64_t *hold_base = (uint64_t *)PLAT_QEMU_HOLD_BASE;
+
+	if (pos < 0) {
+		return PSCI_E_INVALID_PARAMS;
+	}
+
+	hold_base[pos] = PLAT_QEMU_HOLD_STATE_GO;
+	dsb();
+	sev();
+
+	return PSCI_E_SUCCESS;
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be turned off. The
+ * target_state encodes the power state that each level should transition to.
+ ******************************************************************************/
+static void qemu_pwr_domain_off(const psci_power_state_t *target_state)
+{
+	qemu_pwr_gic_off();
+}
+
+void __dead2 plat_secondary_cold_boot_setup(void);
+
+static void __dead2
+qemu_pwr_domain_pwr_down_wfi(const psci_power_state_t *target_state)
+{
+	disable_mmu_el3();
+	plat_secondary_cold_boot_setup();
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be suspended. The
+ * target_state encodes the power state that each level should transition to.
+ ******************************************************************************/
+void qemu_pwr_domain_suspend(const psci_power_state_t *target_state)
+{
+	assert(false);
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain has just been powered on after
+ * being turned off earlier. The target_state encodes the low power state that
+ * each level has woken up from.
+ ******************************************************************************/
+void qemu_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+	assert(target_state->pwr_domain_state[MPIDR_AFFLVL0] ==
+					PLAT_LOCAL_STATE_OFF);
+
+	qemu_pwr_gic_on_finish();
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain has just been powered on after
+ * having been suspended earlier. The target_state encodes the low power state
+ * that each level has woken up from.
+ ******************************************************************************/
+void qemu_pwr_domain_suspend_finish(const psci_power_state_t *target_state)
+{
+	assert(false);
+}
+
+/*******************************************************************************
+ * Platform handlers to shutdown/reboot the system
+ ******************************************************************************/
+static void __dead2 qemu_system_off(void)
+{
+	mmio_write_32(SBSA_SECURE_EC_OFFSET, SBSA_SECURE_EC_CMD_SHUTDOWN);
+	panic();
+}
+
+static void __dead2 qemu_system_reset(void)
+{
+	mmio_write_32(SBSA_SECURE_EC_OFFSET, SBSA_SECURE_EC_CMD_REBOOT);
+	panic();
+}
+
+static const plat_psci_ops_t plat_qemu_psci_pm_ops = {
+	.cpu_standby = qemu_cpu_standby,
+	.pwr_domain_on = qemu_pwr_domain_on,
+	.pwr_domain_off = qemu_pwr_domain_off,
+	.pwr_domain_pwr_down_wfi = qemu_pwr_domain_pwr_down_wfi,
+	.pwr_domain_suspend = qemu_pwr_domain_suspend,
+	.pwr_domain_on_finish = qemu_pwr_domain_on_finish,
+	.pwr_domain_suspend_finish = qemu_pwr_domain_suspend_finish,
+	.system_off = qemu_system_off,
+	.system_reset = qemu_system_reset,
+	.validate_power_state = qemu_validate_power_state
+};
+
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+			const plat_psci_ops_t **psci_ops)
+{
+	uintptr_t *mailbox = (uintptr_t *)PLAT_QEMU_TRUSTED_MAILBOX_BASE;
+
+	*mailbox = sec_entrypoint;
+	secure_entrypoint = (unsigned long)sec_entrypoint;
+	*psci_ops = &plat_qemu_psci_pm_ops;
+
+	return 0;
+}
diff --git a/plat/qemu/qemu_sbsa/sbsa_private.h b/plat/qemu/qemu_sbsa/sbsa_private.h
new file mode 100644
index 0000000..a9f4601
--- /dev/null
+++ b/plat/qemu/qemu_sbsa/sbsa_private.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2020, Nuvia Inc
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SBSA_PRIVATE_H
+#define SBSA_PRIVATE_H
+
+#include <stdint.h>
+
+unsigned int plat_qemu_calc_core_pos(u_register_t mpidr);
+
+void qemu_pwr_gic_on_finish(void);
+void qemu_pwr_gic_off(void);
+
+#endif /* SBSA_PRIVATE_H */
diff --git a/plat/qemu/qemu_sbsa/sbsa_topology.c b/plat/qemu/qemu_sbsa/sbsa_topology.c
new file mode 100644
index 0000000..bd8d16b
--- /dev/null
+++ b/plat/qemu/qemu_sbsa/sbsa_topology.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2020, Nuvia Inc
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <common/debug.h>
+
+#include <platform_def.h>
+#include "sbsa_private.h"
+
+/* The power domain tree descriptor */
+static unsigned char power_domain_tree_desc[PLATFORM_CLUSTER_COUNT + 1];
+
+/*******************************************************************************
+ * This function returns the sbsa-ref default topology tree information.
+ ******************************************************************************/
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+	unsigned int i;
+
+	power_domain_tree_desc[0] = PLATFORM_CLUSTER_COUNT;
+
+	for (i = 0U; i < PLATFORM_CLUSTER_COUNT; i++) {
+		power_domain_tree_desc[i + 1] = PLATFORM_MAX_CPUS_PER_CLUSTER;
+	}
+
+	return power_domain_tree_desc;
+}
+
+/*******************************************************************************
+ * This function implements a part of the critical interface between the psci
+ * generic layer and the platform that allows the former to query the platform
+ * to convert an MPIDR to a unique linear index. An error code (-1) is returned
+ * in case the MPIDR is invalid.
+ ******************************************************************************/
+int plat_core_pos_by_mpidr(u_register_t mpidr)
+{
+	unsigned int cluster_id, cpu_id;
+
+	mpidr &= MPIDR_AFFINITY_MASK;
+	if ((mpidr & ~(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)) != 0U) {
+		ERROR("Invalid MPIDR\n");
+		return -1;
+	}
+
+	cluster_id = (mpidr >> MPIDR_AFF1_SHIFT) & MPIDR_AFFLVL_MASK;
+	cpu_id = (mpidr >> MPIDR_AFF0_SHIFT) & MPIDR_AFFLVL_MASK;
+
+	if (cluster_id >= PLATFORM_CLUSTER_COUNT) {
+		ERROR("cluster_id >= PLATFORM_CLUSTER_COUNT define\n");
+		return -1;
+	}
+
+	if (cpu_id >= PLATFORM_MAX_CPUS_PER_CLUSTER) {
+		ERROR("cpu_id >= PLATFORM_MAX_CPUS_PER_CLUSTER define\n");
+		return -1;
+	}
+
+	return plat_qemu_calc_core_pos(mpidr);
+}