diff --git a/drivers/nxp/tzc/plat_tzc380.c b/drivers/nxp/tzc/plat_tzc380.c
new file mode 100644
index 0000000..13cf3b9
--- /dev/null
+++ b/drivers/nxp/tzc/plat_tzc380.c
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2018-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+#include <plat_tzc380.h>
+
+#pragma weak populate_tzc380_reg_list
+
+#ifdef DEFAULT_TZASC_CONFIG
+/*
+ * Typical Memory map of DRAM0
+ *    |-----------NXP_NS_DRAM_ADDR ( = NXP_DRAM0_ADDR)----------|
+ *    |								|
+ *    |								|
+ *    |			Non-SECURE REGION			|
+ *    |								|
+ *    |								|
+ *    |								|
+ *    |------- (NXP_NS_DRAM_ADDR + NXP_NS_DRAM_SIZE - 1) -------|
+ *    |-----------------NXP_SECURE_DRAM_ADDR--------------------|
+ *    |								|
+ *    |								|
+ *    |								|
+ *    |			SECURE REGION (= 64MB)			|
+ *    |								|
+ *    |								|
+ *    |								|
+ *    |--- (NXP_SECURE_DRAM_ADDR + NXP_SECURE_DRAM_SIZE - 1)----|
+ *    |-----------------NXP_SP_SHRD_DRAM_ADDR-------------------|
+ *    |								|
+ *    |	       Secure EL1 Payload SHARED REGION (= 2MB)         |
+ *    |								|
+ *    |-----------(NXP_DRAM0_ADDR + NXP_DRAM0_SIZE - 1)---------|
+ *
+ *
+ *
+ * Typical Memory map of DRAM1
+ *    |---------------------NXP_DRAM1_ADDR----------------------|
+ *    |								|
+ *    |								|
+ *    |			Non-SECURE REGION			|
+ *    |								|
+ *    |								|
+ *    |---(NXP_DRAM1_ADDR + Dynamically calculated Size - 1) ---|
+ *
+ *
+ * Typical Memory map of DRAM2
+ *    |---------------------NXP_DRAM2_ADDR----------------------|
+ *    |								|
+ *    |								|
+ *    |			Non-SECURE REGION			|
+ *    |								|
+ *    |								|
+ *    |---(NXP_DRAM2_ADDR + Dynamically calculated Size - 1) ---|
+ */
+
+/*****************************************************************************
+ * This function sets up access permissions on memory regions
+ *
+ * Input:
+ *	tzc380_reg_list	: TZC380 Region List
+ *	dram_idx	: DRAM index
+ *	list_idx	: TZC380 Region List Index
+ *	dram_start_addr	: Start address of DRAM at dram_idx.
+ *	dram_size	: Size of DRAM at dram_idx.
+ *	secure_dram_sz	: Secure DRAM Size
+ *	shrd_dram_sz	: Shared DRAM Size
+ *
+ * Out:
+ *	list_idx	: last populated index + 1
+ *
+ ****************************************************************************/
+int populate_tzc380_reg_list(struct tzc380_reg *tzc380_reg_list,
+			     int dram_idx, int list_idx,
+			     uint64_t dram_start_addr,
+			     uint64_t dram_size,
+			     uint32_t secure_dram_sz,
+			     uint32_t shrd_dram_sz)
+{
+	/* Region 0: Default region marked as Non-Secure */
+	if (list_idx == 0) {
+		tzc380_reg_list[list_idx].secure = TZC_ATTR_SP_NS_RW;
+		tzc380_reg_list[list_idx].enabled = TZC_ATTR_REGION_DISABLE;
+		tzc380_reg_list[list_idx].addr = UL(0x0);
+		tzc380_reg_list[list_idx].size = 0x0;
+		tzc380_reg_list[list_idx].sub_mask = 0x0; /* all enabled */
+		list_idx++;
+	}
+	/* Continue with list entries for index > 0 */
+	if (dram_idx == 0) {
+		/* TZC Region 1 on DRAM0 for Secure Memory*/
+		tzc380_reg_list[list_idx].secure = TZC_ATTR_SP_S_RW;
+		tzc380_reg_list[list_idx].enabled = TZC_ATTR_REGION_ENABLE;
+		tzc380_reg_list[list_idx].addr = dram_start_addr + dram_size;
+		tzc380_reg_list[list_idx].size = secure_dram_sz;
+		tzc380_reg_list[list_idx].sub_mask = 0x0; /* all enabled */
+		list_idx++;
+
+		/* TZC Region 2 on DRAM0 for Shared Memory*/
+		tzc380_reg_list[list_idx].secure = TZC_ATTR_SP_S_RW;
+		tzc380_reg_list[list_idx].enabled = TZC_ATTR_REGION_ENABLE;
+		tzc380_reg_list[list_idx].addr = dram_start_addr + dram_size + secure_dram_sz;
+		tzc380_reg_list[list_idx].size = shrd_dram_sz;
+		tzc380_reg_list[list_idx].sub_mask = 0x0; /* all enabled */
+		list_idx++;
+
+	}
+
+	return list_idx;
+}
+#else
+int populate_tzc380_reg_list(struct tzc380_reg *tzc380_reg_list,
+			     int dram_idx, int list_idx,
+			     uint64_t dram_start_addr,
+			     uint64_t dram_size,
+			     uint32_t secure_dram_sz,
+			     uint32_t shrd_dram_sz)
+{
+	ERROR("tzc380_reg_list used is not a default list\n");
+	ERROR("%s needs to be over-written.\n", __func__);
+	return 0;
+}
+#endif	/* DEFAULT_TZASC_CONFIG */
+
+
+void mem_access_setup(uintptr_t base, uint32_t total_regions,
+			struct tzc380_reg *tzc380_reg_list)
+{
+	uint32_t indx = 0;
+	unsigned int attr_value;
+
+	VERBOSE("Configuring TrustZone Controller tzc380\n");
+
+	tzc380_init(base);
+
+	tzc380_set_action(TZC_ACTION_NONE);
+
+	for (indx = 0; indx < total_regions; indx++) {
+		attr_value = tzc380_reg_list[indx].secure |
+			TZC_ATTR_SUBREG_DIS(tzc380_reg_list[indx].sub_mask) |
+			TZC_ATTR_REGION_SIZE(tzc380_reg_list[indx].size) |
+			tzc380_reg_list[indx].enabled;
+
+		tzc380_configure_region(indx, tzc380_reg_list[indx].addr,
+				attr_value);
+	}
+
+	tzc380_set_action(TZC_ACTION_ERR);
+}
diff --git a/drivers/nxp/tzc/tzc.mk b/drivers/nxp/tzc/tzc.mk
index 3fba28f..4418bfc 100644
--- a/drivers/nxp/tzc/tzc.mk
+++ b/drivers/nxp/tzc/tzc.mk
@@ -13,11 +13,18 @@
 ifeq ($(TZC_ID), TZC400)
 TZASC_SOURCES		+= drivers/arm/tzc/tzc400.c\
 			   $(PLAT_DRIVERS_PATH)/tzc/plat_tzc400.c
-else ifeq ($(TZC_ID), NONE)
+else
+ifeq ($(TZC_ID), TZC380)
+TZASC_SOURCES		+= drivers/arm/tzc/tzc380.c\
+			   $(PLAT_DRIVERS_PATH)/tzc/plat_tzc380.c
+else
+ifeq ($(TZC_ID), NONE)
     $(info -> No TZC present on platform)
 else
     $(error -> TZC type not set!)
 endif
+endif
+endif
 
 ifeq (${BL_COMM_TZASC_NEEDED},yes)
 BL_COMMON_SOURCES	+= ${TZASC_SOURCES}
diff --git a/include/drivers/nxp/tzc/plat_tzc380.h b/include/drivers/nxp/tzc/plat_tzc380.h
new file mode 100644
index 0000000..08d2148
--- /dev/null
+++ b/include/drivers/nxp/tzc/plat_tzc380.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2018-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#if !defined(PLAT_TZC380_H) && defined(IMAGE_BL2)
+#define PLAT_TZC380_H
+
+#include <tzc380.h>
+
+/* Number of DRAM regions to be configured
+ * for the platform can be over-written.
+ *
+ * Array tzc400_reg_list too, needs be over-written
+ * if there is any changes to default DRAM region
+ * configuration.
+ */
+#ifndef MAX_NUM_TZC_REGION
+/* 3 regions:
+ *  Region 0(default),
+ *  Region 1 (DRAM0, Secure Memory),
+ *  Region 2 (DRAM0, Shared memory)
+ */
+#define MAX_NUM_TZC_REGION	3
+#define DEFAULT_TZASC_CONFIG	1
+#endif
+
+struct tzc380_reg {
+	unsigned int secure;
+	unsigned int enabled;
+	uint64_t addr;
+	uint64_t size;
+	unsigned int sub_mask;
+};
+
+void mem_access_setup(uintptr_t base, uint32_t total_regions,
+			struct tzc380_reg *tzc380_reg_list);
+
+int populate_tzc380_reg_list(struct tzc380_reg *tzc380_reg_list,
+			     int dram_idx, int list_idx,
+			     uint64_t dram_start_addr,
+			     uint64_t dram_size,
+			     uint32_t secure_dram_sz,
+			     uint32_t shrd_dram_sz);
+
+#endif /* PLAT_TZC380_H */