/*
 * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include <arch_helpers.h>
#include <assert.h>
#include <cortex_a57.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <common/interrupt_props.h>
#include <drivers/console.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
#include <drivers/arm/gic_common.h>
#include <drivers/arm/gicv2.h>
#include <bl31/interrupt_mgmt.h>

#include <bpmp.h>
#include <flowctrl.h>
#include <platform.h>
#include <security_engine.h>
#include <tegra_def.h>
#include <tegra_platform.h>
#include <tegra_private.h>

/* sets of MMIO ranges setup */
#define MMIO_RANGE_0_ADDR	0x50000000
#define MMIO_RANGE_1_ADDR	0x60000000
#define MMIO_RANGE_2_ADDR	0x70000000
#define MMIO_RANGE_SIZE		0x200000

/*
 * Table of regions to map using the MMU.
 */
static const mmap_region_t tegra_mmap[] = {
	MAP_REGION_FLAT(TEGRA_IRAM_BASE, 0x40000, /* 256KB */
			MT_DEVICE | MT_RW | MT_SECURE),
	MAP_REGION_FLAT(MMIO_RANGE_0_ADDR, MMIO_RANGE_SIZE,
			MT_DEVICE | MT_RW | MT_SECURE),
	MAP_REGION_FLAT(MMIO_RANGE_1_ADDR, MMIO_RANGE_SIZE,
			MT_DEVICE | MT_RW | MT_SECURE),
	MAP_REGION_FLAT(MMIO_RANGE_2_ADDR, MMIO_RANGE_SIZE,
			MT_DEVICE | MT_RW | MT_SECURE),
	{0}
};

/*******************************************************************************
 * Set up the pagetables as per the platform memory map & initialize the MMU
 ******************************************************************************/
const mmap_region_t *plat_get_mmio_map(void)
{
	/* Add the map region for security engine SE2 */
	if (tegra_chipid_is_t210_b01()) {
		mmap_add_region((uint64_t)TEGRA_SE2_BASE,
				(uint64_t)TEGRA_SE2_BASE,
				(uint64_t)TEGRA_SE2_RANGE_SIZE,
				MT_DEVICE | MT_RW | MT_SECURE);
	}

	/* MMIO space */
	return tegra_mmap;
}

/*******************************************************************************
 * The Tegra power domain tree has a single system level power domain i.e. a
 * single root node. The first entry in the power domain descriptor specifies
 * the number of power domains at the highest power level.
 *******************************************************************************
 */
const unsigned char tegra_power_domain_tree_desc[] = {
	/* No of root nodes */
	1,
	/* No of clusters */
	PLATFORM_CLUSTER_COUNT,
	/* No of CPU cores - cluster0 */
	PLATFORM_MAX_CPUS_PER_CLUSTER,
	/* No of CPU cores - cluster1 */
	PLATFORM_MAX_CPUS_PER_CLUSTER
};

/*******************************************************************************
 * This function returns the Tegra default topology tree information.
 ******************************************************************************/
const unsigned char *plat_get_power_domain_tree_desc(void)
{
	return tegra_power_domain_tree_desc;
}

/*******************************************************************************
 * Handler to get the System Counter Frequency
 ******************************************************************************/
unsigned int plat_get_syscnt_freq2(void)
{
	return 19200000;
}

/*******************************************************************************
 * Maximum supported UART controllers
 ******************************************************************************/
#define TEGRA210_MAX_UART_PORTS		5

/*******************************************************************************
 * This variable holds the UART port base addresses
 ******************************************************************************/
static uint32_t tegra210_uart_addresses[TEGRA210_MAX_UART_PORTS + 1] = {
	0,	/* undefined - treated as an error case */
	TEGRA_UARTA_BASE,
	TEGRA_UARTB_BASE,
	TEGRA_UARTC_BASE,
	TEGRA_UARTD_BASE,
	TEGRA_UARTE_BASE,
};

/*******************************************************************************
 * Retrieve the UART controller base to be used as the console
 ******************************************************************************/
uint32_t plat_get_console_from_id(int id)
{
	if (id > TEGRA210_MAX_UART_PORTS)
		return 0;

	return tegra210_uart_addresses[id];
}

/*******************************************************************************
 * Handler for early platform setup
 ******************************************************************************/
void plat_early_platform_setup(void)
{
	const plat_params_from_bl2_t *plat_params = bl31_get_plat_params();
	uint64_t val;

	/* platform parameter passed by the previous bootloader */
	if (plat_params->l2_ecc_parity_prot_dis != 1) {
		/* Enable ECC Parity Protection for Cortex-A57 CPUs */
		val = read_l2ctlr_el1();
		val |= (uint64_t)CORTEX_A57_L2_ECC_PARITY_PROTECTION_BIT;
		write_l2ctlr_el1(val);
	}

	/* Initialize security engine driver */
	if (tegra_chipid_is_t210_b01()) {
		tegra_se_init();
	}
}

/* Secure IRQs for Tegra186 */
static const interrupt_prop_t tegra210_interrupt_props[] = {
	INTR_PROP_DESC(TEGRA210_WDT_CPU_LEGACY_FIQ, GIC_HIGHEST_SEC_PRIORITY,
			GICV2_INTR_GROUP0, GIC_INTR_CFG_EDGE),
};

void plat_late_platform_setup(void)
{
	const plat_params_from_bl2_t *plat_params = bl31_get_plat_params();
	uint64_t tzdram_start, tzdram_end, sc7entry_end;
	int ret;

	/* memmap TZDRAM area containing the SC7 Entry Firmware */
	if (plat_params->sc7entry_fw_base && plat_params->sc7entry_fw_size) {

		assert(plat_params->sc7entry_fw_size <= TEGRA_IRAM_SIZE);

		/*
		 * Verify that the SC7 entry firmware resides inside the TZDRAM
		 * aperture, _after_ the BL31 code.
		 */
		tzdram_start = plat_params->tzdram_base;
		tzdram_end = plat_params->tzdram_base + plat_params->tzdram_size;
		sc7entry_end = plat_params->sc7entry_fw_base +
			       plat_params->sc7entry_fw_size;
		if ((plat_params->sc7entry_fw_base < (tzdram_start + BL31_SIZE)) ||
		    (sc7entry_end > tzdram_end)) {
			panic();
		}

		/* power off BPMP processor until SC7 entry */
		tegra_fc_bpmp_off();

		/* memmap SC7 entry firmware code */
		ret = mmap_add_dynamic_region(plat_params->sc7entry_fw_base,
				plat_params->sc7entry_fw_base,
				plat_params->sc7entry_fw_size,
				MT_NS | MT_RO | MT_EXECUTE_NEVER);
		assert(ret == 0);
	}
}

/*******************************************************************************
 * Initialize the GIC and SGIs
 ******************************************************************************/
void plat_gic_setup(void)
{
	tegra_gic_setup(tegra210_interrupt_props, ARRAY_SIZE(tegra210_interrupt_props));

	/* Enable handling for FIQs */
	tegra_fiq_handler_setup();

	/*
	 * Enable routing watchdog FIQs from the flow controller to
	 * the GICD.
	 */
	tegra_fc_enable_fiq_to_ccplex_routing();
}