diff --git a/plat/allwinner/sun50i_a64/sunxi_power.c b/plat/allwinner/sun50i_a64/sunxi_power.c
index 80a69c3..0fdb62d 100644
--- a/plat/allwinner/sun50i_a64/sunxi_power.c
+++ b/plat/allwinner/sun50i_a64/sunxi_power.c
@@ -14,6 +14,7 @@
 #include <drivers/allwinner/sunxi_rsb.h>
 #include <lib/mmio.h>
 
+#include <core_off_arisc.h>
 #include <sunxi_def.h>
 #include <sunxi_mmap.h>
 #include <sunxi_private.h>
@@ -205,3 +206,55 @@
 	}
 
 }
+
+/* This lock synchronises access to the arisc management processor. */
+static DEFINE_BAKERY_LOCK(arisc_lock);
+
+/*
+ * If we are supposed to turn ourself off, tell the arisc SCP to do that
+ * work for us. Without any SCPI provider running there, we place some
+ * OpenRISC code into SRAM, put the address of that into the reset vector
+ * and release the arisc reset line. The SCP will wait for the core to enter
+ * WFI, then execute that code and pull the line up again.
+ * The code expects the core mask to be patched into the first instruction.
+ */
+void sunxi_cpu_power_off_self(void)
+{
+	u_register_t mpidr = read_mpidr();
+	unsigned int core  = MPIDR_AFFLVL0_VAL(mpidr);
+	uintptr_t arisc_reset_vec = SUNXI_SRAM_A2_BASE + 0x100;
+	uint32_t *code = arisc_core_off;
+
+	do {
+		bakery_lock_get(&arisc_lock);
+		/* Wait until the arisc is in reset state. */
+		if (!(mmio_read_32(SUNXI_R_CPUCFG_BASE) & BIT(0)))
+			break;
+
+		bakery_lock_release(&arisc_lock);
+	} while (1);
+
+	/* Patch up the code to feed in an input parameter. */
+	code[0] = (code[0] & ~0xffff) | BIT_32(core);
+	clean_dcache_range((uintptr_t)code, sizeof(arisc_core_off));
+
+	/*
+	 * The OpenRISC unconditional branch has opcode 0, the branch offset
+	 * is in the lower 26 bits, containing the distance to the target,
+	 * in instruction granularity (32 bits).
+	 */
+	mmio_write_32(arisc_reset_vec, ((uintptr_t)code - arisc_reset_vec) / 4);
+	clean_dcache_range(arisc_reset_vec, 4);
+
+	/* De-assert the arisc reset line to let it run. */
+	mmio_setbits_32(SUNXI_R_CPUCFG_BASE, BIT(0));
+
+	/*
+	 * We release the lock here, although the arisc is still busy.
+	 * But as long as it runs, the reset line is high, so other users
+	 * won't leave the loop above.
+	 * Once it has finished, the code is supposed to clear the reset line,
+	 * to signal this to other users.
+	 */
+	bakery_lock_release(&arisc_lock);
+}