amlogic: Introduce directory parameters in the makefiles
Make the platform name a parameter for the source directories. Besides a
cosmetic fix, this is going to be helpful when reusing the same Makefile
for different SoCs.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I307897a21800cca8ad68a5ab8972d27e9356ff2a
diff --git a/plat/amlogic/gxbb/platform.mk b/plat/amlogic/gxbb/platform.mk
index 06aaaba..5ab4d52 100644
--- a/plat/amlogic/gxbb/platform.mk
+++ b/plat/amlogic/gxbb/platform.mk
@@ -6,29 +6,32 @@
include lib/xlat_tables_v2/xlat_tables.mk
-PLAT_INCLUDES := -Iplat/amlogic/gxbb/include
+AML_PLAT := plat/amlogic
+AML_PLAT_SOC := ${AML_PLAT}/${PLAT}
-GXBB_GIC_SOURCES := drivers/arm/gic/common/gic_common.c \
+PLAT_INCLUDES := -I${AML_PLAT_SOC}/include
+
+GIC_SOURCES := drivers/arm/gic/common/gic_common.c \
drivers/arm/gic/v2/gicv2_main.c \
drivers/arm/gic/v2/gicv2_helpers.c \
plat/common/plat_gicv2.c
PLAT_BL_COMMON_SOURCES := drivers/amlogic/console/aarch64/meson_console.S \
- plat/amlogic/gxbb/gxbb_common.c \
- plat/amlogic/gxbb/gxbb_topology.c \
+ ${AML_PLAT_SOC}/gxbb_common.c \
+ ${AML_PLAT_SOC}/gxbb_topology.c \
${XLAT_TABLES_LIB_SRCS}
BL31_SOURCES += lib/cpus/aarch64/cortex_a53.S \
plat/common/plat_psci_common.c \
- plat/amlogic/gxbb/aarch64/gxbb_helpers.S \
- plat/amlogic/gxbb/gxbb_bl31_setup.c \
- plat/amlogic/gxbb/gxbb_efuse.c \
- plat/amlogic/gxbb/gxbb_mhu.c \
- plat/amlogic/gxbb/gxbb_pm.c \
- plat/amlogic/gxbb/gxbb_scpi.c \
- plat/amlogic/gxbb/gxbb_sip_svc.c \
- plat/amlogic/gxbb/gxbb_thermal.c \
- ${GXBB_GIC_SOURCES}
+ ${AML_PLAT_SOC}/aarch64/gxbb_helpers.S \
+ ${AML_PLAT_SOC}/gxbb_bl31_setup.c \
+ ${AML_PLAT_SOC}/gxbb_efuse.c \
+ ${AML_PLAT_SOC}/gxbb_mhu.c \
+ ${AML_PLAT_SOC}/gxbb_pm.c \
+ ${AML_PLAT_SOC}/gxbb_scpi.c \
+ ${AML_PLAT_SOC}/gxbb_sip_svc.c \
+ ${AML_PLAT_SOC}/gxbb_thermal.c \
+ ${GIC_SOURCES}
# Tune compiler for Cortex-A53
ifeq ($(notdir $(CC)),armclang)
@@ -61,9 +64,9 @@
# -------------------
ifneq (${RESET_TO_BL31}, 0)
- $(error Error: gxbb needs RESET_TO_BL31=0)
+ $(error Error: ${PLAT} needs RESET_TO_BL31=0)
endif
ifeq (${ARCH},aarch32)
- $(error Error: AArch32 not supported on gxbb)
+ $(error Error: AArch32 not supported on ${PLAT})
endif