ARMv8 Trusted Firmware release v0.2
diff --git a/bl1/aarch64/early_exceptions.S b/bl1/aarch64/early_exceptions.S
new file mode 100644
index 0000000..08a1122
--- /dev/null
+++ b/bl1/aarch64/early_exceptions.S
@@ -0,0 +1,216 @@
+/*
+ * Copyright (c) 2013, ARM Limited. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch.h>
+#include <bl_common.h>
+#include <bl1.h>
+#include <platform.h>
+#include <runtime_svc.h>
+
+ .globl early_exceptions
+
+
+ .section .text, "ax"; .align 11
+
+ /* -----------------------------------------------------
+ * Very simple exception handlers used by BL1 and BL2.
+ * Apart from one SMC exception all other traps loop
+ * endlessly.
+ * -----------------------------------------------------
+ */
+ .align 7
+early_exceptions:
+ /* -----------------------------------------------------
+ * Current EL with SP0 : 0x0 - 0x180
+ * -----------------------------------------------------
+ */
+SynchronousExceptionSP0:
+ mov x0, #SYNC_EXCEPTION_SP_EL0
+ bl plat_report_exception
+ b SynchronousExceptionSP0
+
+ .align 7
+IrqSP0:
+ mov x0, #IRQ_SP_EL0
+ bl plat_report_exception
+ b IrqSP0
+
+ .align 7
+FiqSP0:
+ mov x0, #FIQ_SP_EL0
+ bl plat_report_exception
+ b FiqSP0
+
+ .align 7
+SErrorSP0:
+ mov x0, #SERROR_SP_EL0
+ bl plat_report_exception
+ b SErrorSP0
+
+ /* -----------------------------------------------------
+ * Current EL with SPx: 0x200 - 0x380
+ * -----------------------------------------------------
+ */
+ .align 7
+SynchronousExceptionSPx:
+ mov x0, #SYNC_EXCEPTION_SP_ELX
+ bl plat_report_exception
+ b SynchronousExceptionSPx
+
+ .align 7
+IrqSPx:
+ mov x0, #IRQ_SP_ELX
+ bl plat_report_exception
+ b IrqSPx
+
+ .align 7
+FiqSPx:
+ mov x0, #FIQ_SP_ELX
+ bl plat_report_exception
+ b FiqSPx
+
+ .align 7
+SErrorSPx:
+ mov x0, #SERROR_SP_ELX
+ bl plat_report_exception
+ b SErrorSPx
+
+ /* -----------------------------------------------------
+ * Lower EL using AArch64 : 0x400 - 0x580
+ * -----------------------------------------------------
+ */
+ .align 7
+SynchronousExceptionA64:
+ /* ---------------------------------------------
+ * Only a single SMC exception from BL2 to ask
+ * BL1 to pass EL3 control to BL31 is expected
+ * here.
+ * ---------------------------------------------
+ */
+ sub sp, sp, #0x40
+ stp x0, x1, [sp, #0x0]
+ stp x2, x3, [sp, #0x10]
+ stp x4, x5, [sp, #0x20]
+ stp x6, x7, [sp, #0x30]
+ mov x19, x0
+ mov x20, x1
+ mov x21, x2
+
+ mov x0, #SYNC_EXCEPTION_AARCH64
+ bl plat_report_exception
+
+ bl read_esr
+ ubfx x1, x0, #ESR_EC_SHIFT, #ESR_EC_LENGTH
+ cmp x1, #EC_AARCH64_SMC
+ b.ne panic
+ mov x1, #RUN_IMAGE
+ cmp x19, x1
+ b.ne panic
+ mov x0, x20
+ mov x1, x21
+ mov x2, x3
+ mov x3, x4
+ bl display_boot_progress
+ mov x0, x20
+ bl write_elr
+ mov x0, x21
+ bl write_spsr
+ ubfx x0, x21, #MODE_EL_SHIFT, #2
+ cmp x0, #MODE_EL3
+ b.ne skip_mmu_teardown
+ /* ---------------------------------------------
+ * If BL31 is to be executed in EL3 as well
+ * then turn off the MMU so that it can perform
+ * its own setup. TODO: Assuming flat mapped
+ * translations here. Also all should go into a
+ * separate MMU teardown function
+ * ---------------------------------------------
+ */
+ mov x1, #(SCTLR_M_BIT | SCTLR_C_BIT | SCTLR_I_BIT)
+ bl read_sctlr
+ bic x0, x0, x1
+ bl write_sctlr
+ mov x0, #DCCISW
+ bl dcsw_op_all
+ bl tlbialle3
+skip_mmu_teardown:
+ ldp x6, x7, [sp, #0x30]
+ ldp x4, x5, [sp, #0x20]
+ ldp x2, x3, [sp, #0x10]
+ ldp x0, x1, [sp, #0x0]
+ add sp, sp, #0x40
+ eret
+panic:
+ b panic
+ .align 7
+IrqA64:
+ mov x0, #IRQ_AARCH64
+ bl plat_report_exception
+ b IrqA64
+
+ .align 7
+FiqA64:
+ mov x0, #FIQ_AARCH64
+ bl plat_report_exception
+ b FiqA64
+
+ .align 7
+SErrorA64:
+ mov x0, #SERROR_AARCH64
+ bl plat_report_exception
+ b SErrorA64
+
+ /* -----------------------------------------------------
+ * Lower EL using AArch32 : 0x0 - 0x180
+ * -----------------------------------------------------
+ */
+ .align 7
+SynchronousExceptionA32:
+ mov x0, #SYNC_EXCEPTION_AARCH32
+ bl plat_report_exception
+ b SynchronousExceptionA32
+
+ .align 7
+IrqA32:
+ mov x0, #IRQ_AARCH32
+ bl plat_report_exception
+ b IrqA32
+
+ .align 7
+FiqA32:
+ mov x0, #FIQ_AARCH32
+ bl plat_report_exception
+ b FiqA32
+
+ .align 7
+SErrorA32:
+ mov x0, #SERROR_AARCH32
+ bl plat_report_exception
+ b SErrorA32