Merge "fix(gpt): correct the GPC enable sequence" into integration
diff --git a/Makefile b/Makefile
index 5916963..afa417b 100644
--- a/Makefile
+++ b/Makefile
@@ -9,6 +9,7 @@
#
VERSION_MAJOR := 2
VERSION_MINOR := 7
+VERSION := ${VERSION_MAJOR}.${VERSION_MINOR}
# Default goal is build all images
.DEFAULT_GOAL := all
@@ -322,7 +323,7 @@
ifeq (${BUILD_STRING},)
BUILD_STRING := $(shell git describe --always --dirty --tags 2> /dev/null)
endif
-VERSION_STRING := v${VERSION_MAJOR}.${VERSION_MINOR}(${BUILD_TYPE}):${BUILD_STRING}
+VERSION_STRING := v${VERSION}(${BUILD_TYPE}):${BUILD_STRING}
ifeq (${AARCH32_INSTRUCTION_SET},A32)
TF_CFLAGS_aarch32 += -marm
@@ -600,6 +601,9 @@
PIE_FOUND := $(findstring --enable-default-pie,${GCC_V_OUTPUT})
ifneq ($(PIE_FOUND),)
TF_CFLAGS += -fno-PIE
+ifneq ($(findstring gcc,$(notdir $(LD))),)
+ TF_LDFLAGS += -no-pie
+endif
endif
ifneq ($(findstring gcc,$(notdir $(LD))),)
@@ -790,11 +794,15 @@
$(error "ENABLE_SVE_FOR_NS cannot be used with ARCH=aarch32")
endif
- # BRBE is not supported in Aarch32
+ # BRBE is not supported in AArch32
ifeq (${ENABLE_BRBE_FOR_NS},1)
$(error "ENABLE_BRBE_FOR_NS cannot be used with ARCH=aarch32")
endif
+ # FEAT_RNG_TRAP is not supported in AArch32
+ ifeq (${ENABLE_FEAT_RNG_TRAP},1)
+ $(error "ENABLE_FEAT_RNG_TRAP cannot be used with ARCH=aarch32")
+ endif
endif
# Ensure ENABLE_RME is not used with SME
@@ -1075,6 +1083,7 @@
ENABLE_FEAT_HCX \
ENABLE_FEAT_PAN \
ENABLE_FEAT_RNG \
+ ENABLE_FEAT_RNG_TRAP \
ENABLE_FEAT_SB \
ENABLE_FEAT_SEL2 \
ENABLE_FEAT_VHE \
@@ -1186,6 +1195,7 @@
COT_DESC_IN_DTB \
USE_SP804_TIMER \
ENABLE_FEAT_RNG \
+ ENABLE_FEAT_RNG_TRAP \
ENABLE_FEAT_SB \
ENABLE_FEAT_DIT \
NR_OF_FW_BANKS \
diff --git a/bl31/aarch64/ea_delegate.S b/bl31/aarch64/ea_delegate.S
index fa6ede8..5e53ab4 100644
--- a/bl31/aarch64/ea_delegate.S
+++ b/bl31/aarch64/ea_delegate.S
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2022, NVIDIA Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -84,10 +85,6 @@
b 2f
1:
- /* Test for EA bit in the instruction syndrome */
- mrs x30, esr_el3
- tbz x30, #ESR_ISS_EABORT_EA_BIT, 3f
-
/*
* Save general purpose and ARMv8.3-PAuth registers (if enabled).
* If Secure Cycle Counter is not disabled in MDCR_EL3 when
@@ -114,7 +111,6 @@
ldp x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2]
ldp x4, x5, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X4]
-3:
/* Synchronous exceptions other than the above are assumed to be EA */
ldr x30, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_LR]
no_ret report_unhandled_exception
diff --git a/bl31/bl31.ld.S b/bl31/bl31.ld.S
index 8a1573a..309e752 100644
--- a/bl31/bl31.ld.S
+++ b/bl31/bl31.ld.S
@@ -47,6 +47,10 @@
__RODATA_START__ = .;
*(SORT_BY_ALIGNMENT(.rodata*))
+#if PLAT_EXTRA_RODATA_INCLUDES
+#include <plat.ld.rodata.inc>
+#endif
+
RODATA_COMMON
/* Place pubsub sections for events */
@@ -186,10 +190,10 @@
__RW_END__ = .;
__BL31_END__ = .;
+ ASSERT(. <= BL31_LIMIT, "BL31 image has exceeded its limit.")
+#endif
+
/DISCARD/ : {
*(.dynsym .dynstr .hash .gnu.hash)
}
-
- ASSERT(. <= BL31_LIMIT, "BL31 image has exceeded its limit.")
-#endif
}
diff --git a/bl31/ehf.c b/bl31/ehf.c
index 745f165..b328380 100644
--- a/bl31/ehf.c
+++ b/bl31/ehf.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -475,9 +475,16 @@
assert((exception_data.pri_bits >= 1U) ||
(exception_data.pri_bits < 8U));
- /* Route EL3 interrupts when in Secure and Non-secure. */
+ /* Route EL3 interrupts when in Non-secure. */
set_interrupt_rm_flag(flags, NON_SECURE);
+
+ /*
+ * Route EL3 interrupts when in secure, only when SPMC is not present
+ * in S-EL2.
+ */
+#if !(defined(SPD_spmd) && (SPMD_SPM_AT_SEL2 == 1))
set_interrupt_rm_flag(flags, SECURE);
+#endif /* !(defined(SPD_spmd) && (SPMD_SPM_AT_SEL2 == 1)) */
/* Register handler for EL3 interrupts */
ret = register_interrupt_type_handler(INTR_TYPE_EL3,
diff --git a/bl32/tsp/aarch64/tsp_entrypoint.S b/bl32/tsp/aarch64/tsp_entrypoint.S
index 7d77f47..e5ea88c 100644
--- a/bl32/tsp/aarch64/tsp_entrypoint.S
+++ b/bl32/tsp/aarch64/tsp_entrypoint.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2013-2021, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -10,12 +10,16 @@
#include <asm_macros.S>
#include <bl32/tsp/tsp.h>
#include <lib/xlat_tables/xlat_tables_defs.h>
+#include <smccc_helpers.h>
#include "../tsp_private.h"
.globl tsp_entrypoint
.globl tsp_vector_table
+#if SPMC_AT_EL3
+ .globl tsp_cpu_on_entry
+#endif
@@ -25,10 +29,10 @@
* ---------------------------------------------
*/
.macro restore_args_call_smc
- ldp x6, x7, [x0, #TSP_ARG6]
- ldp x4, x5, [x0, #TSP_ARG4]
- ldp x2, x3, [x0, #TSP_ARG2]
- ldp x0, x1, [x0, #TSP_ARG0]
+ ldp x6, x7, [x0, #SMC_ARG6]
+ ldp x4, x5, [x0, #SMC_ARG4]
+ ldp x2, x3, [x0, #SMC_ARG2]
+ ldp x0, x1, [x0, #SMC_ARG0]
smc #0
.endm
diff --git a/bl32/tsp/ffa_helpers.c b/bl32/tsp/ffa_helpers.c
new file mode 100644
index 0000000..3639c22
--- /dev/null
+++ b/bl32/tsp/ffa_helpers.c
@@ -0,0 +1,250 @@
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+#include "ffa_helpers.h"
+#include <services/ffa_svc.h>
+#include "tsp_private.h"
+
+/*******************************************************************************
+ * Wrapper function to send a direct request.
+ ******************************************************************************/
+smc_args_t ffa_msg_send_direct_req(ffa_endpoint_id16_t sender,
+ ffa_endpoint_id16_t receiver,
+ uint32_t arg3,
+ uint32_t arg4,
+ uint32_t arg5,
+ uint32_t arg6,
+ uint32_t arg7)
+{
+ uint32_t src_dst_ids = (sender << FFA_DIRECT_MSG_SOURCE_SHIFT) |
+ (receiver << FFA_DIRECT_MSG_DESTINATION_SHIFT);
+
+
+ /* Send Direct Request. */
+ return smc_helper(FFA_MSG_SEND_DIRECT_REQ_SMC64, src_dst_ids,
+ 0, arg3, arg4, arg5, arg6, arg7);
+}
+
+/*******************************************************************************
+ * Wrapper function to send a direct response.
+ ******************************************************************************/
+smc_args_t *ffa_msg_send_direct_resp(ffa_endpoint_id16_t sender,
+ ffa_endpoint_id16_t receiver,
+ uint32_t arg3,
+ uint32_t arg4,
+ uint32_t arg5,
+ uint32_t arg6,
+ uint32_t arg7)
+{
+ uint32_t src_dst_ids = (sender << FFA_DIRECT_MSG_SOURCE_SHIFT) |
+ (receiver << FFA_DIRECT_MSG_DESTINATION_SHIFT);
+
+ return set_smc_args(FFA_MSG_SEND_DIRECT_RESP_SMC64, src_dst_ids,
+ 0, arg3, arg4, arg5, arg6, arg7);
+}
+
+/*******************************************************************************
+ * Memory Management Helpers.
+ ******************************************************************************/
+
+/**
+ * Initialises the header of the given `ffa_mtd`, not including the
+ * composite memory region offset.
+ */
+static void ffa_memory_region_init_header(
+ struct ffa_mtd *memory_region, ffa_endpoint_id16_t sender,
+ ffa_mem_attr16_t attributes, ffa_mtd_flag32_t flags,
+ uint64_t handle, uint64_t tag, ffa_endpoint_id16_t *receivers,
+ uint32_t receiver_count, ffa_mem_perm8_t permissions)
+{
+ struct ffa_emad_v1_0 *emad;
+
+ memory_region->emad_offset = sizeof(struct ffa_mtd);
+ memory_region->emad_size = sizeof(struct ffa_emad_v1_0);
+ emad = (struct ffa_emad_v1_0 *)
+ ((uint8_t *) memory_region +
+ memory_region->emad_offset);
+ memory_region->sender_id = sender;
+ memory_region->memory_region_attributes = attributes;
+ memory_region->reserved_36_39 = 0;
+ memory_region->flags = flags;
+ memory_region->handle = handle;
+ memory_region->tag = tag;
+ memory_region->reserved_40_47 = 0;
+ memory_region->emad_count = receiver_count;
+ for (uint32_t i = 0U; i < receiver_count; i++) {
+ emad[i].mapd.endpoint_id = receivers[i];
+ emad[i].mapd.memory_access_permissions = permissions;
+ emad[i].mapd.flags = 0;
+ emad[i].comp_mrd_offset = 0;
+ emad[i].reserved_8_15 = 0;
+ }
+}
+/**
+ * Initialises the given `ffa_mtd` to be used for an
+ * `FFA_MEM_RETRIEVE_REQ` by the receiver of a memory transaction.
+ * TODO: Support differing attributes per receiver.
+ *
+ * Returns the size of the descriptor written.
+ */
+static uint32_t ffa_memory_retrieve_request_init(
+ struct ffa_mtd *memory_region, uint64_t handle,
+ ffa_endpoint_id16_t sender, ffa_endpoint_id16_t *receivers, uint32_t receiver_count,
+ uint64_t tag, ffa_mtd_flag32_t flags,
+ ffa_mem_perm8_t permissions,
+ ffa_mem_attr16_t attributes)
+{
+ ffa_memory_region_init_header(memory_region, sender, attributes, flags,
+ handle, tag, receivers,
+ receiver_count, permissions);
+
+ return sizeof(struct ffa_mtd) +
+ memory_region->emad_count * sizeof(struct ffa_emad_v1_0);
+}
+
+/* Relinquish access to memory region. */
+bool ffa_mem_relinquish(void)
+{
+ smc_args_t ret;
+
+ ret = smc_helper(FFA_MEM_RELINQUISH, 0, 0, 0, 0, 0, 0, 0);
+ if (ffa_func_id(ret) != FFA_SUCCESS_SMC32) {
+ ERROR("%s failed to relinquish memory! error: (%x) %x\n",
+ __func__, ffa_func_id(ret), ffa_error_code(ret));
+ return false;
+ }
+ return true;
+}
+
+/* Retrieve memory shared by another partition. */
+smc_args_t ffa_mem_retrieve_req(uint32_t descriptor_length,
+ uint32_t fragment_length)
+{
+ return smc_helper(FFA_MEM_RETRIEVE_REQ_SMC32,
+ descriptor_length,
+ fragment_length,
+ 0, 0, 0, 0, 0);
+}
+
+/* Retrieve the next memory descriptor fragment. */
+smc_args_t ffa_mem_frag_rx(uint64_t handle, uint32_t recv_length)
+{
+ return smc_helper(FFA_MEM_FRAG_RX,
+ FFA_MEM_HANDLE_LOW(handle),
+ FFA_MEM_HANDLE_HIGH(handle),
+ recv_length,
+ 0, 0, 0, 0);
+}
+
+bool memory_retrieve(struct mailbox *mb,
+ struct ffa_mtd **retrieved,
+ uint64_t handle, ffa_endpoint_id16_t sender,
+ ffa_endpoint_id16_t *receivers, uint32_t receiver_count,
+ ffa_mtd_flag32_t flags, uint32_t *frag_length,
+ uint32_t *total_length)
+{
+ smc_args_t ret;
+ uint32_t descriptor_size;
+ struct ffa_mtd *memory_region = (struct ffa_mtd *)mb->tx_buffer;
+
+ if (retrieved == NULL || mb == NULL) {
+ ERROR("Invalid parameters!\n");
+ return false;
+ }
+
+ /* Clear TX buffer. */
+ memset(memory_region, 0, PAGE_SIZE);
+
+ /* Clear local buffer. */
+ memset(mem_region_buffer, 0, REGION_BUF_SIZE);
+
+ descriptor_size = ffa_memory_retrieve_request_init(
+ memory_region, handle, sender, receivers, receiver_count, 0, flags,
+ FFA_MEM_PERM_RW | FFA_MEM_PERM_NX,
+ FFA_MEM_ATTR_NORMAL_MEMORY_CACHED_WB |
+ FFA_MEM_ATTR_INNER_SHAREABLE);
+
+ ret = ffa_mem_retrieve_req(descriptor_size, descriptor_size);
+
+ if (ffa_func_id(ret) == FFA_ERROR) {
+ ERROR("Couldn't retrieve the memory page. Error: %x\n",
+ ffa_error_code(ret));
+ return false;
+ }
+
+ /*
+ * Following total_size and fragment_size are useful to keep track
+ * of the state of transaction. When the sum of all fragment_size of all
+ * fragments is equal to total_size, the memory transaction has been
+ * completed.
+ */
+ *total_length = ret._regs[1];
+ *frag_length = ret._regs[2];
+
+ /* Validate frag_length is less than total_length and mailbox size. */
+ if (*frag_length == 0U || *total_length == 0U ||
+ *frag_length > *total_length || *frag_length > (mb->rxtx_page_count * PAGE_SIZE)) {
+ ERROR("Invalid parameters!\n");
+ return false;
+ }
+
+ /* Copy response to local buffer. */
+ memcpy(mem_region_buffer, mb->rx_buffer, *frag_length);
+
+ if (ffa_rx_release()) {
+ ERROR("Failed to release buffer!\n");
+ return false;
+ }
+
+ *retrieved = (struct ffa_mtd *) mem_region_buffer;
+
+ if ((*retrieved)->emad_count > MAX_MEM_SHARE_RECIPIENTS) {
+ VERBOSE("SPMC memory sharing supports max of %u receivers!\n",
+ MAX_MEM_SHARE_RECIPIENTS);
+ return false;
+ }
+
+ /*
+ * We are sharing memory from the normal world therefore validate the NS
+ * bit was set by the SPMC.
+ */
+ if (((*retrieved)->memory_region_attributes & FFA_MEM_ATTR_NS_BIT) == 0U) {
+ ERROR("SPMC has not set the NS bit! 0x%x\n",
+ (*retrieved)->memory_region_attributes);
+ return false;
+ }
+
+ VERBOSE("Memory Descriptor Retrieved!\n");
+
+ return true;
+}
+
+/* Relinquish the memory region. */
+bool memory_relinquish(struct ffa_mem_relinquish_descriptor *m, uint64_t handle,
+ ffa_endpoint_id16_t id)
+{
+ ffa_mem_relinquish_init(m, handle, 0, id);
+ return ffa_mem_relinquish();
+}
+
+/* Query SPMC that the rx buffer of the partition can be released. */
+bool ffa_rx_release(void)
+{
+ smc_args_t ret;
+
+ ret = smc_helper(FFA_RX_RELEASE, 0, 0, 0, 0, 0, 0, 0);
+ return ret._regs[SMC_ARG0] != FFA_SUCCESS_SMC32;
+}
+
+/* Map the provided buffers with the SPMC. */
+bool ffa_rxtx_map(uintptr_t send, uintptr_t recv, uint32_t pages)
+{
+ smc_args_t ret;
+
+ ret = smc_helper(FFA_RXTX_MAP_SMC64, send, recv, pages, 0, 0, 0, 0);
+ return ret._regs[0] != FFA_SUCCESS_SMC32;
+}
diff --git a/bl32/tsp/ffa_helpers.h b/bl32/tsp/ffa_helpers.h
new file mode 100644
index 0000000..e650a07
--- /dev/null
+++ b/bl32/tsp/ffa_helpers.h
@@ -0,0 +1,116 @@
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FFA_HELPERS_H
+#define FFA_HELPERS_H
+
+#include <stdint.h>
+
+#include "../../services/std_svc/spm/el3_spmc/spmc.h"
+#include "../../services/std_svc/spm/el3_spmc/spmc_shared_mem.h"
+#include <services/el3_spmc_ffa_memory.h>
+#include <services/ffa_svc.h>
+#include "tsp_private.h"
+
+static inline uint32_t ffa_func_id(smc_args_t val)
+{
+ return (uint32_t) val._regs[0];
+}
+
+static inline int32_t ffa_error_code(smc_args_t val)
+{
+ return (uint32_t) val._regs[2];
+}
+
+extern uint8_t mem_region_buffer[4096 * 2] __aligned(PAGE_SIZE);
+#define REGION_BUF_SIZE sizeof(mem_region_buffer)
+
+/** The maximum number of recipients a memory region may be sent to. */
+#define MAX_MEM_SHARE_RECIPIENTS 2U
+
+/* FFA Memory Management mode flags. */
+#define FFA_FLAG_SHARE_MEMORY (1U << 3)
+#define FFA_FLAG_LEND_MEMORY (1U << 4)
+
+#define FFA_FLAG_MEMORY_MASK (3U << 3)
+
+#define FFA_MEM_HANDLE_LOW(x) (x & 0xFFFFFFFF)
+#define FFA_MEM_HANDLE_HIGH(x) (x >> 32)
+
+#define FFA_MEM_PERM_DATA_OFFSET 0
+#define FFA_MEM_PERM_DATA_MASK 0x3
+
+static inline uint32_t ffa_mem_relinquish_init(
+ struct ffa_mem_relinquish_descriptor *relinquish_request,
+ uint64_t handle, ffa_mtd_flag32_t flags,
+ ffa_endpoint_id16_t sender)
+{
+ relinquish_request->handle = handle;
+ relinquish_request->flags = flags;
+ relinquish_request->endpoint_count = 1;
+ relinquish_request->endpoint_array[0] = sender;
+
+ return sizeof(struct ffa_mem_relinquish_descriptor) + sizeof(ffa_endpoint_id16_t);
+}
+
+/**
+ * Gets the `ffa_comp_mrd` for the given receiver from an
+ * `ffa_mtd`, or NULL if it is not valid.
+ */
+static inline struct ffa_comp_mrd *
+ffa_memory_region_get_composite(struct ffa_mtd *memory_region,
+ uint32_t receiver_index)
+{
+ struct ffa_emad_v1_0 *receivers;
+ uint32_t offset;
+
+ receivers = (struct ffa_emad_v1_0 *)
+ ((uint8_t *) memory_region +
+ memory_region->emad_offset +
+ (memory_region->emad_size * receiver_index));
+ offset = receivers->comp_mrd_offset;
+
+ if (offset == 0U) {
+ return NULL;
+ }
+
+ return (struct ffa_comp_mrd *)
+ ((uint8_t *) memory_region + offset);
+}
+
+static inline uint32_t ffa_get_data_access_attr(ffa_mem_perm8_t perm)
+{
+ return ((perm >> FFA_MEM_PERM_DATA_OFFSET) & FFA_MEM_PERM_DATA_MASK);
+}
+
+smc_args_t ffa_mem_frag_rx(uint64_t handle, uint32_t recv_length);
+bool ffa_mem_relinquish(void);
+bool ffa_rx_release(void);
+bool memory_relinquish(struct ffa_mem_relinquish_descriptor *m, uint64_t handle,
+ ffa_endpoint_id16_t id);
+bool ffa_rxtx_map(uintptr_t send, uintptr_t recv, uint32_t pages);
+bool memory_retrieve(struct mailbox *mb,
+ struct ffa_mtd **retrieved,
+ uint64_t handle, ffa_endpoint_id16_t sender,
+ ffa_endpoint_id16_t *receivers, uint32_t receiver_count,
+ ffa_mtd_flag32_t flags, uint32_t *frag_length,
+ uint32_t *total_length);
+
+smc_args_t ffa_msg_send_direct_req(ffa_endpoint_id16_t sender,
+ ffa_endpoint_id16_t receiver,
+ uint32_t arg3,
+ uint32_t arg4,
+ uint32_t arg5,
+ uint32_t arg6,
+ uint32_t arg7);
+smc_args_t *ffa_msg_send_direct_resp(ffa_endpoint_id16_t sender,
+ ffa_endpoint_id16_t receiver,
+ uint32_t arg3,
+ uint32_t arg4,
+ uint32_t arg5,
+ uint32_t arg6,
+ uint32_t arg7);
+#endif /* FFA_HELPERS_H */
diff --git a/bl32/tsp/tsp.mk b/bl32/tsp/tsp.mk
index 3fd6d99..c31b9b5 100644
--- a/bl32/tsp/tsp.mk
+++ b/bl32/tsp/tsp.mk
@@ -1,17 +1,24 @@
#
-# Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2013-2022, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
INCLUDES += -Iinclude/bl32/tsp
-BL32_SOURCES += bl32/tsp/tsp_main.c \
- bl32/tsp/aarch64/tsp_entrypoint.S \
+ifeq (${SPMC_AT_EL3},1)
+ BL32_SOURCES += bl32/tsp/tsp_ffa_main.c \
+ bl32/tsp/ffa_helpers.c
+else
+ BL32_SOURCES += bl32/tsp/tsp_main.c
+endif
+
+BL32_SOURCES += bl32/tsp/aarch64/tsp_entrypoint.S \
bl32/tsp/aarch64/tsp_exceptions.S \
bl32/tsp/aarch64/tsp_request.S \
bl32/tsp/tsp_interrupt.c \
bl32/tsp/tsp_timer.c \
+ bl32/tsp/tsp_common.c \
common/aarch64/early_exceptions.S \
lib/locks/exclusive/aarch64/spinlock.S
diff --git a/bl32/tsp/tsp_common.c b/bl32/tsp/tsp_common.c
new file mode 100644
index 0000000..908b4ff
--- /dev/null
+++ b/bl32/tsp/tsp_common.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (c) 2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <inttypes.h>
+#include <stdint.h>
+
+#include <arch_features.h>
+#include <arch_helpers.h>
+#include <bl32/tsp/tsp.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <lib/spinlock.h>
+#include <plat/common/platform.h>
+#include <platform_tsp.h>
+#include "tsp_private.h"
+
+#include <platform_def.h>
+
+/*******************************************************************************
+ * Per cpu data structure to populate parameters for an SMC in C code and use
+ * a pointer to this structure in assembler code to populate x0-x7.
+ ******************************************************************************/
+static smc_args_t tsp_smc_args[PLATFORM_CORE_COUNT];
+
+/*******************************************************************************
+ * Per cpu data structure to keep track of TSP activity
+ ******************************************************************************/
+work_statistics_t tsp_stats[PLATFORM_CORE_COUNT];
+
+smc_args_t *set_smc_args(uint64_t arg0,
+ uint64_t arg1,
+ uint64_t arg2,
+ uint64_t arg3,
+ uint64_t arg4,
+ uint64_t arg5,
+ uint64_t arg6,
+ uint64_t arg7)
+{
+ uint32_t linear_id;
+ smc_args_t *pcpu_smc_args;
+
+ /*
+ * Return to Secure Monitor by raising an SMC. The results of the
+ * service are passed as an arguments to the SMC.
+ */
+ linear_id = plat_my_core_pos();
+ pcpu_smc_args = &tsp_smc_args[linear_id];
+ write_sp_arg(pcpu_smc_args, SMC_ARG0, arg0);
+ write_sp_arg(pcpu_smc_args, SMC_ARG1, arg1);
+ write_sp_arg(pcpu_smc_args, SMC_ARG2, arg2);
+ write_sp_arg(pcpu_smc_args, SMC_ARG3, arg3);
+ write_sp_arg(pcpu_smc_args, SMC_ARG4, arg4);
+ write_sp_arg(pcpu_smc_args, SMC_ARG5, arg5);
+ write_sp_arg(pcpu_smc_args, SMC_ARG6, arg6);
+ write_sp_arg(pcpu_smc_args, SMC_ARG7, arg7);
+
+ return pcpu_smc_args;
+}
+
+/*******************************************************************************
+ * Setup function for TSP.
+ ******************************************************************************/
+void tsp_setup(void)
+{
+ /* Perform early platform-specific setup. */
+ tsp_early_platform_setup();
+
+ /* Perform late platform-specific setup. */
+ tsp_plat_arch_setup();
+
+#if ENABLE_PAUTH
+ /*
+ * Assert that the ARMv8.3-PAuth registers are present or an access
+ * fault will be triggered when they are being saved or restored.
+ */
+ assert(is_armv8_3_pauth_present());
+#endif /* ENABLE_PAUTH */
+}
+
+/*******************************************************************************
+ * This function performs any remaining bookkeeping in the test secure payload
+ * before the system is switched off (in response to a psci SYSTEM_OFF request).
+ ******************************************************************************/
+smc_args_t *tsp_system_off_main(uint64_t arg0,
+ uint64_t arg1,
+ uint64_t arg2,
+ uint64_t arg3,
+ uint64_t arg4,
+ uint64_t arg5,
+ uint64_t arg6,
+ uint64_t arg7)
+{
+ uint32_t linear_id = plat_my_core_pos();
+
+ /* Update this cpu's statistics. */
+ tsp_stats[linear_id].smc_count++;
+ tsp_stats[linear_id].eret_count++;
+
+ INFO("TSP: cpu 0x%lx SYSTEM_OFF request\n", read_mpidr());
+ INFO("TSP: cpu 0x%lx: %d smcs, %d erets requests\n", read_mpidr(),
+ tsp_stats[linear_id].smc_count,
+ tsp_stats[linear_id].eret_count);
+
+ /* Indicate to the SPD that we have completed this request. */
+ return set_smc_args(TSP_SYSTEM_OFF_DONE, 0, 0, 0, 0, 0, 0, 0);
+}
+
+/*******************************************************************************
+ * This function performs any remaining bookkeeping in the test secure payload
+ * before the system is reset (in response to a psci SYSTEM_RESET request).
+ ******************************************************************************/
+smc_args_t *tsp_system_reset_main(uint64_t arg0,
+ uint64_t arg1,
+ uint64_t arg2,
+ uint64_t arg3,
+ uint64_t arg4,
+ uint64_t arg5,
+ uint64_t arg6,
+ uint64_t arg7)
+{
+ uint32_t linear_id = plat_my_core_pos();
+
+ /* Update this cpu's statistics. */
+ tsp_stats[linear_id].smc_count++;
+ tsp_stats[linear_id].eret_count++;
+
+ INFO("TSP: cpu 0x%lx SYSTEM_RESET request\n", read_mpidr());
+ INFO("TSP: cpu 0x%lx: %d smcs, %d erets requests\n", read_mpidr(),
+ tsp_stats[linear_id].smc_count,
+ tsp_stats[linear_id].eret_count);
+
+ /* Indicate to the SPD that we have completed this request. */
+ return set_smc_args(TSP_SYSTEM_RESET_DONE, 0, 0, 0, 0, 0, 0, 0);
+}
+
+/*******************************************************************************
+ * TSP smc abort handler. This function is called when aborting a preempted
+ * yielding SMC request. It should cleanup all resources owned by the SMC
+ * handler such as locks or dynamically allocated memory so following SMC
+ * request are executed in a clean environment.
+ ******************************************************************************/
+smc_args_t *tsp_abort_smc_handler(uint64_t func,
+ uint64_t arg1,
+ uint64_t arg2,
+ uint64_t arg3,
+ uint64_t arg4,
+ uint64_t arg5,
+ uint64_t arg6,
+ uint64_t arg7)
+{
+ return set_smc_args(TSP_ABORT_DONE, 0, 0, 0, 0, 0, 0, 0);
+}
diff --git a/bl32/tsp/tsp_ffa_main.c b/bl32/tsp/tsp_ffa_main.c
new file mode 100644
index 0000000..53dbd03
--- /dev/null
+++ b/bl32/tsp/tsp_ffa_main.c
@@ -0,0 +1,655 @@
+/*
+ * Copyright (c) 2013-2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <inttypes.h>
+#include <stdint.h>
+
+#include "../../services/std_svc/spm/el3_spmc/spmc.h"
+#include "../../services/std_svc/spm/el3_spmc/spmc_shared_mem.h"
+#include <arch_features.h>
+#include <arch_helpers.h>
+#include <bl32/tsp/tsp.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include "ffa_helpers.h"
+#include <lib/psci/psci.h>
+#include <lib/spinlock.h>
+#include <lib/xlat_tables/xlat_tables_defs.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include <plat/common/platform.h>
+#include <platform_tsp.h>
+#include <services/ffa_svc.h>
+#include "tsp_private.h"
+
+#include <platform_def.h>
+
+static ffa_endpoint_id16_t tsp_id, spmc_id;
+uint8_t mem_region_buffer[4096 * 2] __aligned(PAGE_SIZE);
+
+/* Partition Mailbox. */
+static uint8_t send_page[PAGE_SIZE] __aligned(PAGE_SIZE);
+static uint8_t recv_page[PAGE_SIZE] __aligned(PAGE_SIZE);
+
+/*
+ * Declare a global mailbox for use within the TSP.
+ * This will be initialized appropriately when the buffers
+ * are mapped with the SPMC.
+ */
+static struct mailbox mailbox;
+
+/*******************************************************************************
+ * This enum is used to handle test cases driven from the FF-A Test Driver.
+ ******************************************************************************/
+/* Keep in Sync with FF-A Test Driver. */
+enum message_t {
+ /* Partition Only Messages. */
+ FF_A_RELAY_MESSAGE = 0,
+
+ /* Basic Functionality. */
+ FF_A_ECHO_MESSAGE,
+ FF_A_RELAY_MESSAGE_EL3,
+
+ /* Memory Sharing. */
+ FF_A_MEMORY_SHARE,
+ FF_A_MEMORY_SHARE_FRAGMENTED,
+ FF_A_MEMORY_LEND,
+ FF_A_MEMORY_LEND_FRAGMENTED,
+
+ FF_A_MEMORY_SHARE_MULTI_ENDPOINT,
+ FF_A_MEMORY_LEND_MULTI_ENDPOINT,
+
+ LAST,
+ FF_A_RUN_ALL = 255,
+ FF_A_OP_MAX = 256
+};
+
+#if SPMC_AT_EL3
+extern void tsp_cpu_on_entry(void);
+#endif
+
+/*******************************************************************************
+ * Test Functions.
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Enable the TSP to forward the received message to another partition and ask
+ * it to echo the value back in order to validate direct messages functionality.
+ ******************************************************************************/
+static int ffa_test_relay(uint64_t arg0,
+ uint64_t arg1,
+ uint64_t arg2,
+ uint64_t arg3,
+ uint64_t arg4,
+ uint64_t arg5,
+ uint64_t arg6,
+ uint64_t arg7)
+{
+ smc_args_t ffa_forward_result;
+ ffa_endpoint_id16_t receiver = arg5;
+
+ ffa_forward_result = ffa_msg_send_direct_req(ffa_endpoint_source(arg1),
+ receiver,
+ FF_A_ECHO_MESSAGE, arg4,
+ 0, 0, 0);
+ return ffa_forward_result._regs[3];
+}
+
+/*******************************************************************************
+ * This function handles memory management tests, currently share and lend.
+ * This test supports the use of FRAG_RX to use memory descriptors that do not
+ * fit in a single 4KB buffer.
+ ******************************************************************************/
+static int test_memory_send(ffa_endpoint_id16_t sender, uint64_t handle,
+ ffa_mtd_flag32_t flags, bool multi_endpoint)
+{
+ struct ffa_mtd *m;
+ struct ffa_emad_v1_0 *receivers;
+ struct ffa_comp_mrd *composite;
+ int ret, status = 0;
+ unsigned int mem_attrs;
+ char *ptr;
+ ffa_endpoint_id16_t source = sender;
+ uint32_t total_length, recv_length = 0;
+
+ /*
+ * In the case that we're testing multiple endpoints choose a partition
+ * ID that resides in the normal world so the SPMC won't detect it as
+ * invalid.
+ * TODO: Should get endpoint receiver id and flag as input from NWd.
+ */
+ uint32_t receiver_count = multi_endpoint ? 2 : 1;
+ ffa_endpoint_id16_t test_receivers[2] = { tsp_id, 0x10 };
+
+ /* Ensure that the sender ID resides in the normal world. */
+ if (ffa_is_secure_world_id(sender)) {
+ ERROR("Invalid sender ID 0x%x.\n", sender);
+ return FFA_ERROR_DENIED;
+ }
+
+ if (!memory_retrieve(&mailbox, &m, handle, source, test_receivers,
+ receiver_count, flags, &recv_length,
+ &total_length)) {
+ return FFA_ERROR_INVALID_PARAMETER;
+ }
+
+ receivers = (struct ffa_emad_v1_0 *)
+ ((uint8_t *) m + m->emad_offset);
+ while (total_length != recv_length) {
+ smc_args_t ffa_return;
+ uint32_t frag_length;
+
+ ffa_return = ffa_mem_frag_rx(handle, recv_length);
+
+ if (ffa_return._regs[0] == FFA_ERROR) {
+ WARN("TSP: failed to resume mem with handle %lx\n",
+ handle);
+ return ffa_return._regs[2];
+ }
+ frag_length = ffa_return._regs[3];
+
+ /* Validate frag_length is less than total_length and mailbox size. */
+ if (frag_length > total_length ||
+ frag_length > (mailbox.rxtx_page_count * PAGE_SIZE)) {
+ ERROR("Invalid parameters!\n");
+ return FFA_ERROR_INVALID_PARAMETER;
+ }
+
+ /* Validate frag_length is less than remaining mem_region_buffer size. */
+ if (frag_length + recv_length >= REGION_BUF_SIZE) {
+ ERROR("Out of memory!\n");
+ return FFA_ERROR_INVALID_PARAMETER;
+ }
+
+ memcpy(&mem_region_buffer[recv_length], mailbox.rx_buffer,
+ frag_length);
+
+ if (ffa_rx_release()) {
+ ERROR("Failed to release buffer!\n");
+ return FFA_ERROR_DENIED;
+ }
+
+ recv_length += frag_length;
+
+ assert(recv_length <= total_length);
+ }
+
+ composite = ffa_memory_region_get_composite(m, 0);
+ if (composite == NULL) {
+ WARN("Failed to get composite descriptor!\n");
+ return FFA_ERROR_INVALID_PARAMETER;
+ }
+
+ VERBOSE("Address: %p; page_count: %x %lx\n",
+ (void *)composite->address_range_array[0].address,
+ composite->address_range_array[0].page_count, PAGE_SIZE);
+
+ /* This test is only concerned with RW permissions. */
+ if (ffa_get_data_access_attr(
+ receivers[0].mapd.memory_access_permissions) != FFA_MEM_PERM_RW) {
+ ERROR("Data permission in retrieve response %x does not match share/lend %x!\n",
+ ffa_get_data_access_attr(receivers[0].mapd.memory_access_permissions),
+ FFA_MEM_PERM_RW);
+ return FFA_ERROR_INVALID_PARAMETER;
+ }
+
+ mem_attrs = MT_RW_DATA | MT_EXECUTE_NEVER;
+
+ /* Only expecting to be sent memory from NWd so map accordingly. */
+ mem_attrs |= MT_NS;
+
+ for (uint32_t i = 0U; i < composite->address_range_count; i++) {
+ size_t size = composite->address_range_array[i].page_count * PAGE_SIZE;
+
+ ptr = (char *) composite->address_range_array[i].address;
+ ret = mmap_add_dynamic_region(
+ (uint64_t)ptr,
+ (uint64_t)ptr,
+ size, mem_attrs);
+
+ if (ret != 0) {
+ ERROR("Failed [%u] mmap_add_dynamic_region %u (%lx) (%lx) (%x)!\n",
+ i, ret,
+ (uint64_t)composite->address_range_array[i].address,
+ size, mem_attrs);
+
+ /* Remove mappings created in this transaction. */
+ for (i--; i >= 0U; i--) {
+ ret = mmap_remove_dynamic_region(
+ (uint64_t)ptr,
+ composite->address_range_array[i].page_count * PAGE_SIZE);
+
+ if (ret != 0) {
+ ERROR("Failed [%d] mmap_remove_dynamic_region!\n", i);
+ panic();
+ }
+ }
+ return FFA_ERROR_NO_MEMORY;
+ }
+
+ /* Increment memory region for validation purposes. */
+ ++(*ptr);
+
+ /*
+ * Read initial magic number from memory region for
+ * validation purposes.
+ */
+ if (!i) {
+ status = *ptr;
+ }
+ }
+
+ for (uint32_t i = 0U; i < composite->address_range_count; i++) {
+ ret = mmap_remove_dynamic_region(
+ (uint64_t)composite->address_range_array[i].address,
+ composite->address_range_array[i].page_count * PAGE_SIZE);
+
+ if (ret != 0) {
+ ERROR("Failed [%d] mmap_remove_dynamic_region!\n", i);
+ return FFA_ERROR_NO_MEMORY;
+ }
+ }
+
+ if (!memory_relinquish((struct ffa_mem_relinquish_descriptor *)mailbox.tx_buffer,
+ m->handle, tsp_id)) {
+ ERROR("Failed to relinquish memory region!\n");
+ return FFA_ERROR_INVALID_PARAMETER;
+ }
+ return status;
+}
+
+static smc_args_t *send_ffa_pm_success(void)
+{
+ return set_smc_args(FFA_MSG_SEND_DIRECT_RESP_SMC32,
+ ((tsp_id & FFA_DIRECT_MSG_ENDPOINT_ID_MASK)
+ << FFA_DIRECT_MSG_SOURCE_SHIFT) | spmc_id,
+ FFA_FWK_MSG_BIT |
+ (FFA_PM_MSG_PM_RESP & FFA_FWK_MSG_MASK),
+ 0, 0, 0, 0, 0);
+}
+
+/*******************************************************************************
+ * This function performs any remaining book keeping in the test secure payload
+ * before this cpu is turned off in response to a psci cpu_off request.
+ ******************************************************************************/
+smc_args_t *tsp_cpu_off_main(uint64_t arg0,
+ uint64_t arg1,
+ uint64_t arg2,
+ uint64_t arg3,
+ uint64_t arg4,
+ uint64_t arg5,
+ uint64_t arg6,
+ uint64_t arg7)
+{
+ uint32_t linear_id = plat_my_core_pos();
+
+ /*
+ * This cpu is being turned off, so disable the timer to prevent the
+ * secure timer interrupt from interfering with power down. A pending
+ * interrupt will be lost but we do not care as we are turning off.
+ */
+ tsp_generic_timer_stop();
+
+ /* Update this cpu's statistics. */
+ tsp_stats[linear_id].smc_count++;
+ tsp_stats[linear_id].eret_count++;
+ tsp_stats[linear_id].cpu_off_count++;
+
+ INFO("TSP: cpu 0x%lx off request\n", read_mpidr());
+ INFO("TSP: cpu 0x%lx: %d smcs, %d erets %d cpu off requests\n",
+ read_mpidr(),
+ tsp_stats[linear_id].smc_count,
+ tsp_stats[linear_id].eret_count,
+ tsp_stats[linear_id].cpu_off_count);
+
+ return send_ffa_pm_success();
+}
+
+/*******************************************************************************
+ * This function performs any book keeping in the test secure payload before
+ * this cpu's architectural state is saved in response to an earlier psci
+ * cpu_suspend request.
+ ******************************************************************************/
+smc_args_t *tsp_cpu_suspend_main(uint64_t arg0,
+ uint64_t arg1,
+ uint64_t arg2,
+ uint64_t arg3,
+ uint64_t arg4,
+ uint64_t arg5,
+ uint64_t arg6,
+ uint64_t arg7)
+{
+ uint32_t linear_id = plat_my_core_pos();
+
+ /*
+ * Save the time context and disable it to prevent the secure timer
+ * interrupt from interfering with wakeup from the suspend state.
+ */
+ tsp_generic_timer_save();
+ tsp_generic_timer_stop();
+
+ /* Update this cpu's statistics. */
+ tsp_stats[linear_id].smc_count++;
+ tsp_stats[linear_id].eret_count++;
+ tsp_stats[linear_id].cpu_suspend_count++;
+
+ INFO("TSP: cpu 0x%lx: %d smcs, %d erets %d cpu suspend requests\n",
+ read_mpidr(),
+ tsp_stats[linear_id].smc_count,
+ tsp_stats[linear_id].eret_count,
+ tsp_stats[linear_id].cpu_suspend_count);
+
+ return send_ffa_pm_success();
+}
+
+/*******************************************************************************
+ * This function performs any bookkeeping in the test secure payload after this
+ * cpu's architectural state has been restored after wakeup from an earlier psci
+ * cpu_suspend request.
+ ******************************************************************************/
+smc_args_t *tsp_cpu_resume_main(uint64_t max_off_pwrlvl,
+ uint64_t arg1,
+ uint64_t arg2,
+ uint64_t arg3,
+ uint64_t arg4,
+ uint64_t arg5,
+ uint64_t arg6,
+ uint64_t arg7)
+{
+ uint32_t linear_id = plat_my_core_pos();
+
+ /* Restore the generic timer context. */
+ tsp_generic_timer_restore();
+
+ /* Update this cpu's statistics. */
+ tsp_stats[linear_id].smc_count++;
+ tsp_stats[linear_id].eret_count++;
+ tsp_stats[linear_id].cpu_resume_count++;
+
+ INFO("TSP: cpu 0x%lx resumed. maximum off power level %" PRId64 "\n",
+ read_mpidr(), max_off_pwrlvl);
+ INFO("TSP: cpu 0x%lx: %d smcs, %d erets %d cpu resume requests\n",
+ read_mpidr(),
+ tsp_stats[linear_id].smc_count,
+ tsp_stats[linear_id].eret_count,
+ tsp_stats[linear_id].cpu_resume_count);
+
+ return send_ffa_pm_success();
+}
+
+/*******************************************************************************
+ * This function handles framework messages. Currently only PM.
+ ******************************************************************************/
+static smc_args_t *handle_framework_message(uint64_t arg0,
+ uint64_t arg1,
+ uint64_t arg2,
+ uint64_t arg3,
+ uint64_t arg4,
+ uint64_t arg5,
+ uint64_t arg6,
+ uint64_t arg7)
+{
+ /* Check if it is a power management message from the SPMC. */
+ if (ffa_endpoint_source(arg1) != spmc_id) {
+ goto err;
+ }
+
+ /* Check if it is a PM request message. */
+ if ((arg2 & FFA_FWK_MSG_MASK) == FFA_FWK_MSG_PSCI) {
+ /* Check if it is a PSCI CPU_OFF request. */
+ if (arg3 == PSCI_CPU_OFF) {
+ return tsp_cpu_off_main(arg0, arg1, arg2, arg3,
+ arg4, arg5, arg6, arg7);
+ } else if (arg3 == PSCI_CPU_SUSPEND_AARCH64) {
+ return tsp_cpu_suspend_main(arg0, arg1, arg2, arg3,
+ arg4, arg5, arg6, arg7);
+ }
+ } else if ((arg2 & FFA_FWK_MSG_MASK) == FFA_PM_MSG_WB_REQ) {
+ /* Check it is a PSCI Warm Boot request. */
+ if (arg3 == FFA_WB_TYPE_NOTS2RAM) {
+ return tsp_cpu_resume_main(arg0, arg1, arg2, arg3,
+ arg4, arg5, arg6, arg7);
+ }
+ }
+
+err:
+ ERROR("%s: Unknown framework message!\n", __func__);
+ panic();
+}
+
+/*******************************************************************************
+ * Handles partition messages. Exercised from the FF-A Test Driver.
+ ******************************************************************************/
+static smc_args_t *handle_partition_message(uint64_t arg0,
+ uint64_t arg1,
+ uint64_t arg2,
+ uint64_t arg3,
+ uint64_t arg4,
+ uint64_t arg5,
+ uint64_t arg6,
+ uint64_t arg7)
+{
+ uint16_t sender = ffa_endpoint_source(arg1);
+ uint16_t receiver = ffa_endpoint_destination(arg1);
+ int status = -1;
+ const bool multi_endpoint = true;
+
+ switch (arg3) {
+ case FF_A_MEMORY_SHARE:
+ INFO("TSP Tests: Memory Share Request--\n");
+ status = test_memory_send(sender, arg4, FFA_FLAG_SHARE_MEMORY, !multi_endpoint);
+ break;
+
+ case FF_A_MEMORY_LEND:
+ INFO("TSP Tests: Memory Lend Request--\n");
+ status = test_memory_send(sender, arg4, FFA_FLAG_LEND_MEMORY, !multi_endpoint);
+ break;
+
+ case FF_A_MEMORY_SHARE_MULTI_ENDPOINT:
+ INFO("TSP Tests: Multi Endpoint Memory Share Request--\n");
+ status = test_memory_send(sender, arg4, FFA_FLAG_SHARE_MEMORY, multi_endpoint);
+ break;
+
+ case FF_A_MEMORY_LEND_MULTI_ENDPOINT:
+ INFO("TSP Tests: Multi Endpoint Memory Lend Request--\n");
+ status = test_memory_send(sender, arg4, FFA_FLAG_LEND_MEMORY, multi_endpoint);
+ break;
+ case FF_A_RELAY_MESSAGE:
+ INFO("TSP Tests: Relaying message--\n");
+ status = ffa_test_relay(arg0, arg1, arg2, arg3, arg4,
+ arg5, arg6, arg7);
+ break;
+
+ case FF_A_ECHO_MESSAGE:
+ INFO("TSP Tests: echo message--\n");
+ status = arg4;
+ break;
+
+ default:
+ INFO("TSP Tests: Unknown request ID %d--\n", (int) arg3);
+ }
+
+ /* Swap the sender and receiver in the response. */
+ return ffa_msg_send_direct_resp(receiver, sender, status, 0, 0, 0, 0);
+}
+
+/*******************************************************************************
+ * This function implements the event loop for handling FF-A ABI invocations.
+ ******************************************************************************/
+static smc_args_t *tsp_event_loop(uint64_t smc_fid,
+ uint64_t arg1,
+ uint64_t arg2,
+ uint64_t arg3,
+ uint64_t arg4,
+ uint64_t arg5,
+ uint64_t arg6,
+ uint64_t arg7)
+{
+ /* Panic if the SPMC did not forward an FF-A call. */
+ if (!is_ffa_fid(smc_fid)) {
+ ERROR("%s: Unknown SMC FID (0x%lx)\n", __func__, smc_fid);
+ panic();
+ }
+
+ switch (smc_fid) {
+ case FFA_INTERRUPT:
+ /*
+ * IRQs were enabled upon re-entry into the TSP. The interrupt
+ * must have been handled by now. Return to the SPMC indicating
+ * the same.
+ */
+ return set_smc_args(FFA_MSG_WAIT, 0, 0, 0, 0, 0, 0, 0);
+
+ case FFA_MSG_SEND_DIRECT_REQ_SMC64:
+ case FFA_MSG_SEND_DIRECT_REQ_SMC32:
+ /* Check if a framework message, handle accordingly. */
+ if ((arg2 & FFA_FWK_MSG_BIT)) {
+ return handle_framework_message(smc_fid, arg1, arg2, arg3,
+ arg4, arg5, arg6, arg7);
+ }
+ return handle_partition_message(smc_fid, arg1, arg2, arg3,
+ arg4, arg5, arg6, arg7);
+ }
+
+ ERROR("%s: Unsupported FF-A FID (0x%lx)\n", __func__, smc_fid);
+ panic();
+}
+
+static smc_args_t *tsp_loop(smc_args_t *args)
+{
+ smc_args_t ret;
+
+ do {
+ /* --------------------------------------------
+ * Mask FIQ interrupts to avoid preemption
+ * in case EL3 SPMC delegates an IRQ next or a
+ * managed exit. Lastly, unmask IRQs so that
+ * they can be handled immediately upon re-entry.
+ * ---------------------------------------------
+ */
+ write_daifset(DAIF_FIQ_BIT);
+ write_daifclr(DAIF_IRQ_BIT);
+ ret = smc_helper(args->_regs[0], args->_regs[1], args->_regs[2],
+ args->_regs[3], args->_regs[4], args->_regs[5],
+ args->_regs[6], args->_regs[7]);
+ args = tsp_event_loop(ret._regs[0], ret._regs[1], ret._regs[2],
+ ret._regs[3], ret._regs[4], ret._regs[5],
+ ret._regs[6], ret._regs[7]);
+ } while (1);
+
+ /* Not Reached. */
+ return NULL;
+}
+
+/*******************************************************************************
+ * TSP main entry point where it gets the opportunity to initialize its secure
+ * state/applications. Once the state is initialized, it must return to the
+ * SPD with a pointer to the 'tsp_vector_table' jump table.
+ ******************************************************************************/
+uint64_t tsp_main(void)
+{
+ smc_args_t smc_args = {0};
+
+ NOTICE("TSP: %s\n", version_string);
+ NOTICE("TSP: %s\n", build_message);
+ INFO("TSP: Total memory base : 0x%lx\n", (unsigned long) BL32_BASE);
+ INFO("TSP: Total memory size : 0x%lx bytes\n", BL32_TOTAL_SIZE);
+ uint32_t linear_id = plat_my_core_pos();
+
+ /* Initialize the platform. */
+ tsp_platform_setup();
+
+ /* Initialize secure/applications state here. */
+ tsp_generic_timer_start();
+
+ /* Register secondary entrypoint with the SPMC. */
+ smc_args = smc_helper(FFA_SECONDARY_EP_REGISTER_SMC64,
+ (uint64_t) tsp_cpu_on_entry,
+ 0, 0, 0, 0, 0, 0);
+ if (smc_args._regs[SMC_ARG0] != FFA_SUCCESS_SMC32) {
+ ERROR("TSP could not register secondary ep (0x%lx)\n",
+ smc_args._regs[2]);
+ panic();
+ }
+ /* Get TSP's endpoint id. */
+ smc_args = smc_helper(FFA_ID_GET, 0, 0, 0, 0, 0, 0, 0);
+ if (smc_args._regs[SMC_ARG0] != FFA_SUCCESS_SMC32) {
+ ERROR("TSP could not get own ID (0x%lx) on core%d\n",
+ smc_args._regs[2], linear_id);
+ panic();
+ }
+
+ tsp_id = smc_args._regs[2];
+ INFO("TSP FF-A endpoint id = 0x%x\n", tsp_id);
+
+ /* Get the SPMC ID. */
+ smc_args = smc_helper(FFA_SPM_ID_GET, 0, 0, 0, 0, 0, 0, 0);
+ if (smc_args._regs[SMC_ARG0] != FFA_SUCCESS_SMC32) {
+ ERROR("TSP could not get SPMC ID (0x%lx) on core%d\n",
+ smc_args._regs[2], linear_id);
+ panic();
+ }
+
+ spmc_id = smc_args._regs[2];
+
+ /* Call RXTX_MAP to map a 4k RX and TX buffer. */
+ if (ffa_rxtx_map((uintptr_t) send_page,
+ (uintptr_t) recv_page, 1)) {
+ ERROR("TSP could not map it's RX/TX Buffers\n");
+ panic();
+ }
+
+ mailbox.tx_buffer = send_page;
+ mailbox.rx_buffer = recv_page;
+ mailbox.rxtx_page_count = 1;
+
+ /* Update this cpu's statistics. */
+ tsp_stats[linear_id].smc_count++;
+ tsp_stats[linear_id].eret_count++;
+ tsp_stats[linear_id].cpu_on_count++;
+
+ INFO("TSP: cpu 0x%lx: %d smcs, %d erets %d cpu on requests\n",
+ read_mpidr(),
+ tsp_stats[linear_id].smc_count,
+ tsp_stats[linear_id].eret_count,
+ tsp_stats[linear_id].cpu_on_count);
+
+ /* Tell SPMD that we are done initialising. */
+ tsp_loop(set_smc_args(FFA_MSG_WAIT, 0, 0, 0, 0, 0, 0, 0));
+
+ /* Not reached. */
+ return 0;
+}
+
+/*******************************************************************************
+ * This function performs any remaining book keeping in the test secure payload
+ * after this cpu's architectural state has been setup in response to an earlier
+ * psci cpu_on request.
+ ******************************************************************************/
+smc_args_t *tsp_cpu_on_main(void)
+{
+ uint32_t linear_id = plat_my_core_pos();
+
+ /* Initialize secure/applications state here. */
+ tsp_generic_timer_start();
+
+ /* Update this cpu's statistics. */
+ tsp_stats[linear_id].smc_count++;
+ tsp_stats[linear_id].eret_count++;
+ tsp_stats[linear_id].cpu_on_count++;
+ INFO("TSP: cpu 0x%lx turned on\n", read_mpidr());
+ INFO("TSP: cpu 0x%lx: %d smcs, %d erets %d cpu on requests\n",
+ read_mpidr(),
+ tsp_stats[linear_id].smc_count,
+ tsp_stats[linear_id].eret_count,
+ tsp_stats[linear_id].cpu_on_count);
+ /* ---------------------------------------------
+ * Jump to the main event loop to return to EL3
+ * and be ready for the next request on this cpu.
+ * ---------------------------------------------
+ */
+ return tsp_loop(set_smc_args(FFA_MSG_WAIT, 0, 0, 0, 0, 0, 0, 0));
+}
diff --git a/bl32/tsp/tsp_interrupt.c b/bl32/tsp/tsp_interrupt.c
index 430b5dd..a847b6c 100644
--- a/bl32/tsp/tsp_interrupt.c
+++ b/bl32/tsp/tsp_interrupt.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -35,8 +35,6 @@
if (type == TSP_HANDLE_SEL1_INTR_AND_RETURN)
tsp_stats[linear_id].sync_sel1_intr_ret_count++;
-#if LOG_LEVEL >= LOG_LEVEL_VERBOSE
- spin_lock(&console_lock);
VERBOSE("TSP: cpu 0x%lx sync s-el1 interrupt request from 0x%" PRIx64 "\n",
read_mpidr(), elr_el3);
VERBOSE("TSP: cpu 0x%lx: %d sync s-el1 interrupt requests,"
@@ -44,8 +42,6 @@
read_mpidr(),
tsp_stats[linear_id].sync_sel1_intr_count,
tsp_stats[linear_id].sync_sel1_intr_ret_count);
- spin_unlock(&console_lock);
-#endif
}
/******************************************************************************
@@ -58,12 +54,8 @@
uint32_t linear_id = plat_my_core_pos();
tsp_stats[linear_id].preempt_intr_count++;
-#if LOG_LEVEL >= LOG_LEVEL_VERBOSE
- spin_lock(&console_lock);
VERBOSE("TSP: cpu 0x%lx: %d preempt interrupt requests\n",
read_mpidr(), tsp_stats[linear_id].preempt_intr_count);
- spin_unlock(&console_lock);
-#endif
return TSP_PREEMPTED;
}
@@ -91,8 +83,18 @@
id = plat_ic_get_pending_interrupt_id();
/* TSP can only handle the secure physical timer interrupt */
- if (id != TSP_IRQ_SEC_PHY_TIMER)
+ if (id != TSP_IRQ_SEC_PHY_TIMER) {
+#if SPMC_AT_EL3
+ /*
+ * With the EL3 FF-A SPMC we expect only Timer secure interrupt to fire in
+ * the TSP, so panic if any other interrupt does.
+ */
+ ERROR("Unexpected interrupt id %u\n", id);
+ panic();
+#else
return tsp_handle_preemption();
+#endif
+ }
/*
* Acknowledge and handle the secure timer interrupt. Also sanity check
@@ -105,13 +107,9 @@
/* Update the statistics and print some messages */
tsp_stats[linear_id].sel1_intr_count++;
-#if LOG_LEVEL >= LOG_LEVEL_VERBOSE
- spin_lock(&console_lock);
VERBOSE("TSP: cpu 0x%lx handled S-EL1 interrupt %d\n",
read_mpidr(), id);
VERBOSE("TSP: cpu 0x%lx: %d S-EL1 requests\n",
read_mpidr(), tsp_stats[linear_id].sel1_intr_count);
- spin_unlock(&console_lock);
-#endif
return 0;
}
diff --git a/bl32/tsp/tsp_main.c b/bl32/tsp/tsp_main.c
index 522c1b4..df9903b 100644
--- a/bl32/tsp/tsp_main.c
+++ b/bl32/tsp/tsp_main.c
@@ -15,85 +15,10 @@
#include <common/debug.h>
#include <lib/spinlock.h>
#include <plat/common/platform.h>
-#include <platform_def.h>
#include <platform_tsp.h>
-
#include "tsp_private.h"
-
-/*******************************************************************************
- * Lock to control access to the console
- ******************************************************************************/
-spinlock_t console_lock;
-
-/*******************************************************************************
- * Per cpu data structure to populate parameters for an SMC in C code and use
- * a pointer to this structure in assembler code to populate x0-x7
- ******************************************************************************/
-static tsp_args_t tsp_smc_args[PLATFORM_CORE_COUNT];
-
-/*******************************************************************************
- * Per cpu data structure to keep track of TSP activity
- ******************************************************************************/
-work_statistics_t tsp_stats[PLATFORM_CORE_COUNT];
-
-/*******************************************************************************
- * The TSP memory footprint starts at address BL32_BASE and ends with the
- * linker symbol __BL32_END__. Use these addresses to compute the TSP image
- * size.
- ******************************************************************************/
-#define BL32_TOTAL_LIMIT BL32_END
-#define BL32_TOTAL_SIZE (BL32_TOTAL_LIMIT - (unsigned long) BL32_BASE)
-
-static tsp_args_t *set_smc_args(uint64_t arg0,
- uint64_t arg1,
- uint64_t arg2,
- uint64_t arg3,
- uint64_t arg4,
- uint64_t arg5,
- uint64_t arg6,
- uint64_t arg7)
-{
- uint32_t linear_id;
- tsp_args_t *pcpu_smc_args;
-
- /*
- * Return to Secure Monitor by raising an SMC. The results of the
- * service are passed as an arguments to the SMC
- */
- linear_id = plat_my_core_pos();
- pcpu_smc_args = &tsp_smc_args[linear_id];
- write_sp_arg(pcpu_smc_args, TSP_ARG0, arg0);
- write_sp_arg(pcpu_smc_args, TSP_ARG1, arg1);
- write_sp_arg(pcpu_smc_args, TSP_ARG2, arg2);
- write_sp_arg(pcpu_smc_args, TSP_ARG3, arg3);
- write_sp_arg(pcpu_smc_args, TSP_ARG4, arg4);
- write_sp_arg(pcpu_smc_args, TSP_ARG5, arg5);
- write_sp_arg(pcpu_smc_args, TSP_ARG6, arg6);
- write_sp_arg(pcpu_smc_args, TSP_ARG7, arg7);
-
- return pcpu_smc_args;
-}
-
-/*******************************************************************************
- * Setup function for TSP.
- ******************************************************************************/
-void tsp_setup(void)
-{
- /* Perform early platform-specific setup */
- tsp_early_platform_setup();
-
- /* Perform late platform-specific setup */
- tsp_plat_arch_setup();
-
-#if ENABLE_PAUTH
- /*
- * Assert that the ARMv8.3-PAuth registers are present or an access
- * fault will be triggered when they are being saved or restored.
- */
- assert(is_armv8_3_pauth_present());
-#endif /* ENABLE_PAUTH */
-}
+#include <platform_def.h>
/*******************************************************************************
* TSP main entry point where it gets the opportunity to initialize its secure
@@ -120,15 +45,11 @@
tsp_stats[linear_id].eret_count++;
tsp_stats[linear_id].cpu_on_count++;
-#if LOG_LEVEL >= LOG_LEVEL_INFO
- spin_lock(&console_lock);
INFO("TSP: cpu 0x%lx: %d smcs, %d erets %d cpu on requests\n",
read_mpidr(),
tsp_stats[linear_id].smc_count,
tsp_stats[linear_id].eret_count,
tsp_stats[linear_id].cpu_on_count);
- spin_unlock(&console_lock);
-#endif
return (uint64_t) &tsp_vector_table;
}
@@ -137,7 +58,7 @@
* after this cpu's architectural state has been setup in response to an earlier
* psci cpu_on request.
******************************************************************************/
-tsp_args_t *tsp_cpu_on_main(void)
+smc_args_t *tsp_cpu_on_main(void)
{
uint32_t linear_id = plat_my_core_pos();
@@ -149,16 +70,12 @@
tsp_stats[linear_id].eret_count++;
tsp_stats[linear_id].cpu_on_count++;
-#if LOG_LEVEL >= LOG_LEVEL_INFO
- spin_lock(&console_lock);
INFO("TSP: cpu 0x%lx turned on\n", read_mpidr());
INFO("TSP: cpu 0x%lx: %d smcs, %d erets %d cpu on requests\n",
read_mpidr(),
tsp_stats[linear_id].smc_count,
tsp_stats[linear_id].eret_count,
tsp_stats[linear_id].cpu_on_count);
- spin_unlock(&console_lock);
-#endif
/* Indicate to the SPD that we have completed turned ourselves on */
return set_smc_args(TSP_ON_DONE, 0, 0, 0, 0, 0, 0, 0);
}
@@ -167,7 +84,7 @@
* This function performs any remaining book keeping in the test secure payload
* before this cpu is turned off in response to a psci cpu_off request.
******************************************************************************/
-tsp_args_t *tsp_cpu_off_main(uint64_t arg0,
+smc_args_t *tsp_cpu_off_main(uint64_t arg0,
uint64_t arg1,
uint64_t arg2,
uint64_t arg3,
@@ -190,16 +107,12 @@
tsp_stats[linear_id].eret_count++;
tsp_stats[linear_id].cpu_off_count++;
-#if LOG_LEVEL >= LOG_LEVEL_INFO
- spin_lock(&console_lock);
INFO("TSP: cpu 0x%lx off request\n", read_mpidr());
INFO("TSP: cpu 0x%lx: %d smcs, %d erets %d cpu off requests\n",
read_mpidr(),
tsp_stats[linear_id].smc_count,
tsp_stats[linear_id].eret_count,
tsp_stats[linear_id].cpu_off_count);
- spin_unlock(&console_lock);
-#endif
/* Indicate to the SPD that we have completed this request */
return set_smc_args(TSP_OFF_DONE, 0, 0, 0, 0, 0, 0, 0);
@@ -210,7 +123,7 @@
* this cpu's architectural state is saved in response to an earlier psci
* cpu_suspend request.
******************************************************************************/
-tsp_args_t *tsp_cpu_suspend_main(uint64_t arg0,
+smc_args_t *tsp_cpu_suspend_main(uint64_t arg0,
uint64_t arg1,
uint64_t arg2,
uint64_t arg3,
@@ -233,15 +146,11 @@
tsp_stats[linear_id].eret_count++;
tsp_stats[linear_id].cpu_suspend_count++;
-#if LOG_LEVEL >= LOG_LEVEL_INFO
- spin_lock(&console_lock);
INFO("TSP: cpu 0x%lx: %d smcs, %d erets %d cpu suspend requests\n",
read_mpidr(),
tsp_stats[linear_id].smc_count,
tsp_stats[linear_id].eret_count,
tsp_stats[linear_id].cpu_suspend_count);
- spin_unlock(&console_lock);
-#endif
/* Indicate to the SPD that we have completed this request */
return set_smc_args(TSP_SUSPEND_DONE, 0, 0, 0, 0, 0, 0, 0);
@@ -252,7 +161,7 @@
* cpu's architectural state has been restored after wakeup from an earlier psci
* cpu_suspend request.
******************************************************************************/
-tsp_args_t *tsp_cpu_resume_main(uint64_t max_off_pwrlvl,
+smc_args_t *tsp_cpu_resume_main(uint64_t max_off_pwrlvl,
uint64_t arg1,
uint64_t arg2,
uint64_t arg3,
@@ -271,8 +180,6 @@
tsp_stats[linear_id].eret_count++;
tsp_stats[linear_id].cpu_resume_count++;
-#if LOG_LEVEL >= LOG_LEVEL_INFO
- spin_lock(&console_lock);
INFO("TSP: cpu 0x%lx resumed. maximum off power level %" PRId64 "\n",
read_mpidr(), max_off_pwrlvl);
INFO("TSP: cpu 0x%lx: %d smcs, %d erets %d cpu resume requests\n",
@@ -280,83 +187,17 @@
tsp_stats[linear_id].smc_count,
tsp_stats[linear_id].eret_count,
tsp_stats[linear_id].cpu_resume_count);
- spin_unlock(&console_lock);
-#endif
/* Indicate to the SPD that we have completed this request */
return set_smc_args(TSP_RESUME_DONE, 0, 0, 0, 0, 0, 0, 0);
}
/*******************************************************************************
- * This function performs any remaining bookkeeping in the test secure payload
- * before the system is switched off (in response to a psci SYSTEM_OFF request)
- ******************************************************************************/
-tsp_args_t *tsp_system_off_main(uint64_t arg0,
- uint64_t arg1,
- uint64_t arg2,
- uint64_t arg3,
- uint64_t arg4,
- uint64_t arg5,
- uint64_t arg6,
- uint64_t arg7)
-{
- uint32_t linear_id = plat_my_core_pos();
-
- /* Update this cpu's statistics */
- tsp_stats[linear_id].smc_count++;
- tsp_stats[linear_id].eret_count++;
-
-#if LOG_LEVEL >= LOG_LEVEL_INFO
- spin_lock(&console_lock);
- INFO("TSP: cpu 0x%lx SYSTEM_OFF request\n", read_mpidr());
- INFO("TSP: cpu 0x%lx: %d smcs, %d erets requests\n", read_mpidr(),
- tsp_stats[linear_id].smc_count,
- tsp_stats[linear_id].eret_count);
- spin_unlock(&console_lock);
-#endif
-
- /* Indicate to the SPD that we have completed this request */
- return set_smc_args(TSP_SYSTEM_OFF_DONE, 0, 0, 0, 0, 0, 0, 0);
-}
-
-/*******************************************************************************
- * This function performs any remaining bookkeeping in the test secure payload
- * before the system is reset (in response to a psci SYSTEM_RESET request)
- ******************************************************************************/
-tsp_args_t *tsp_system_reset_main(uint64_t arg0,
- uint64_t arg1,
- uint64_t arg2,
- uint64_t arg3,
- uint64_t arg4,
- uint64_t arg5,
- uint64_t arg6,
- uint64_t arg7)
-{
- uint32_t linear_id = plat_my_core_pos();
-
- /* Update this cpu's statistics */
- tsp_stats[linear_id].smc_count++;
- tsp_stats[linear_id].eret_count++;
-
-#if LOG_LEVEL >= LOG_LEVEL_INFO
- spin_lock(&console_lock);
- INFO("TSP: cpu 0x%lx SYSTEM_RESET request\n", read_mpidr());
- INFO("TSP: cpu 0x%lx: %d smcs, %d erets requests\n", read_mpidr(),
- tsp_stats[linear_id].smc_count,
- tsp_stats[linear_id].eret_count);
- spin_unlock(&console_lock);
-#endif
-
- /* Indicate to the SPD that we have completed this request */
- return set_smc_args(TSP_SYSTEM_RESET_DONE, 0, 0, 0, 0, 0, 0, 0);
-}
-
-/*******************************************************************************
* TSP fast smc handler. The secure monitor jumps to this function by
* doing the ERET after populating X0-X7 registers. The arguments are received
* in the function arguments in order. Once the service is rendered, this
* function returns to Secure Monitor by raising SMC.
******************************************************************************/
-tsp_args_t *tsp_smc_handler(uint64_t func,
+smc_args_t *tsp_smc_handler(uint64_t func,
uint64_t arg1,
uint64_t arg2,
uint64_t arg3,
@@ -376,16 +217,12 @@
tsp_stats[linear_id].smc_count++;
tsp_stats[linear_id].eret_count++;
-#if LOG_LEVEL >= LOG_LEVEL_INFO
- spin_lock(&console_lock);
INFO("TSP: cpu 0x%lx received %s smc 0x%" PRIx64 "\n", read_mpidr(),
((func >> 31) & 1) == 1 ? "fast" : "yielding",
func);
INFO("TSP: cpu 0x%lx: %d smcs, %d erets\n", read_mpidr(),
tsp_stats[linear_id].smc_count,
tsp_stats[linear_id].eret_count);
- spin_unlock(&console_lock);
-#endif
/* Render secure services and obtain results here */
results[0] = arg1;
@@ -427,11 +264,7 @@
break;
case TSP_CHECK_DIT:
if (!is_armv8_4_dit_present()) {
-#if LOG_LEVEL >= LOG_LEVEL_ERROR
- spin_lock(&console_lock);
ERROR("DIT not supported\n");
- spin_unlock(&console_lock);
-#endif
results[0] = 0;
results[1] = 0xffff;
break;
@@ -451,21 +284,3 @@
results[1],
0, 0, 0, 0);
}
-
-/*******************************************************************************
- * TSP smc abort handler. This function is called when aborting a preempted
- * yielding SMC request. It should cleanup all resources owned by the SMC
- * handler such as locks or dynamically allocated memory so following SMC
- * request are executed in a clean environment.
- ******************************************************************************/
-tsp_args_t *tsp_abort_smc_handler(uint64_t func,
- uint64_t arg1,
- uint64_t arg2,
- uint64_t arg3,
- uint64_t arg4,
- uint64_t arg5,
- uint64_t arg6,
- uint64_t arg7)
-{
- return set_smc_args(TSP_ABORT_DONE, 0, 0, 0, 0, 0, 0, 0);
-}
diff --git a/bl32/tsp/tsp_private.h b/bl32/tsp/tsp_private.h
index 38d9732..66873e2 100644
--- a/bl32/tsp/tsp_private.h
+++ b/bl32/tsp/tsp_private.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -7,28 +7,22 @@
#ifndef TSP_PRIVATE_H
#define TSP_PRIVATE_H
-/* Definitions to help the assembler access the SMC/ERET args structure */
-#define TSP_ARGS_SIZE 0x40
-#define TSP_ARG0 0x0
-#define TSP_ARG1 0x8
-#define TSP_ARG2 0x10
-#define TSP_ARG3 0x18
-#define TSP_ARG4 0x20
-#define TSP_ARG5 0x28
-#define TSP_ARG6 0x30
-#define TSP_ARG7 0x38
-#define TSP_ARGS_END 0x40
-
+/*******************************************************************************
+ * The TSP memory footprint starts at address BL32_BASE and ends with the
+ * linker symbol __BL32_END__. Use these addresses to compute the TSP image
+ * size.
+ ******************************************************************************/
+#define BL32_TOTAL_LIMIT BL32_END
+#define BL32_TOTAL_SIZE (BL32_TOTAL_LIMIT - (unsigned long) BL32_BASE)
#ifndef __ASSEMBLER__
#include <stdint.h>
-#include <platform_def.h> /* For CACHE_WRITEBACK_GRANULE */
-
#include <bl32/tsp/tsp.h>
#include <lib/cassert.h>
#include <lib/spinlock.h>
+#include <smccc_helpers.h>
typedef struct work_statistics {
/* Number of s-el1 interrupts on this cpu */
@@ -47,23 +41,22 @@
uint32_t cpu_resume_count; /* Number of cpu resume requests */
} __aligned(CACHE_WRITEBACK_GRANULE) work_statistics_t;
-typedef struct tsp_args {
- uint64_t _regs[TSP_ARGS_END >> 3];
-} __aligned(CACHE_WRITEBACK_GRANULE) tsp_args_t;
-
/* Macros to access members of the above structure using their offsets */
#define read_sp_arg(args, offset) ((args)->_regs[offset >> 3])
#define write_sp_arg(args, offset, val) (((args)->_regs[offset >> 3]) \
= val)
-/*
- * Ensure that the assembler's view of the size of the tsp_args is the
- * same as the compilers
- */
-CASSERT(TSP_ARGS_SIZE == sizeof(tsp_args_t), assert_sp_args_size_mismatch);
uint128_t tsp_get_magic(void);
-tsp_args_t *tsp_cpu_resume_main(uint64_t max_off_pwrlvl,
+smc_args_t *set_smc_args(uint64_t arg0,
+ uint64_t arg1,
+ uint64_t arg2,
+ uint64_t arg3,
+ uint64_t arg4,
+ uint64_t arg5,
+ uint64_t arg6,
+ uint64_t arg7);
+smc_args_t *tsp_cpu_resume_main(uint64_t max_off_pwrlvl,
uint64_t arg1,
uint64_t arg2,
uint64_t arg3,
@@ -71,7 +64,7 @@
uint64_t arg5,
uint64_t arg6,
uint64_t arg7);
-tsp_args_t *tsp_cpu_suspend_main(uint64_t arg0,
+smc_args_t *tsp_cpu_suspend_main(uint64_t arg0,
uint64_t arg1,
uint64_t arg2,
uint64_t arg3,
@@ -79,8 +72,8 @@
uint64_t arg5,
uint64_t arg6,
uint64_t arg7);
-tsp_args_t *tsp_cpu_on_main(void);
-tsp_args_t *tsp_cpu_off_main(uint64_t arg0,
+smc_args_t *tsp_cpu_on_main(void);
+smc_args_t *tsp_cpu_off_main(uint64_t arg0,
uint64_t arg1,
uint64_t arg2,
uint64_t arg3,
@@ -101,7 +94,6 @@
/* Data structure to keep track of TSP statistics */
-extern spinlock_t console_lock;
extern work_statistics_t tsp_stats[PLATFORM_CORE_COUNT];
/* Vector table of jumps */
@@ -111,7 +103,7 @@
int32_t tsp_common_int_handler(void);
int32_t tsp_handle_preemption(void);
-tsp_args_t *tsp_abort_smc_handler(uint64_t func,
+smc_args_t *tsp_abort_smc_handler(uint64_t func,
uint64_t arg1,
uint64_t arg2,
uint64_t arg3,
@@ -120,25 +112,25 @@
uint64_t arg6,
uint64_t arg7);
-tsp_args_t *tsp_smc_handler(uint64_t func,
- uint64_t arg1,
- uint64_t arg2,
- uint64_t arg3,
- uint64_t arg4,
- uint64_t arg5,
- uint64_t arg6,
- uint64_t arg7);
+smc_args_t *tsp_smc_handler(uint64_t func,
+ uint64_t arg1,
+ uint64_t arg2,
+ uint64_t arg3,
+ uint64_t arg4,
+ uint64_t arg5,
+ uint64_t arg6,
+ uint64_t arg7);
-tsp_args_t *tsp_system_reset_main(uint64_t arg0,
- uint64_t arg1,
- uint64_t arg2,
- uint64_t arg3,
- uint64_t arg4,
- uint64_t arg5,
- uint64_t arg6,
- uint64_t arg7);
+smc_args_t *tsp_system_reset_main(uint64_t arg0,
+ uint64_t arg1,
+ uint64_t arg2,
+ uint64_t arg3,
+ uint64_t arg4,
+ uint64_t arg5,
+ uint64_t arg6,
+ uint64_t arg7);
-tsp_args_t *tsp_system_off_main(uint64_t arg0,
+smc_args_t *tsp_system_off_main(uint64_t arg0,
uint64_t arg1,
uint64_t arg2,
uint64_t arg3,
diff --git a/changelog.yaml b/changelog.yaml
index c4028c4..d3e235d 100644
--- a/changelog.yaml
+++ b/changelog.yaml
@@ -125,6 +125,9 @@
- title: Extended Cache Index (FEAT_CCIDX)
scope: ccidx
+ - title: Trapping support for RNDR/RNDRRS (FEAT_RNG_TRAP)
+ scope: rng-trap
+
- title: Platforms
subsections:
@@ -546,6 +549,13 @@
- title: BL31
scope: bl31
+ - title: BL32
+ scope: bl32
+
+ subsections:
+ - title: TSP
+ scope: tsp
+
- title: Services
scope: services
diff --git a/common/bl_common.c b/common/bl_common.c
index 9bfaafd..8fce02f 100644
--- a/common/bl_common.c
+++ b/common/bl_common.c
@@ -269,3 +269,12 @@
#endif
#undef PRINT_IMAGE_ARG
}
+
+/*
+ * This function is for returning the TF-A version
+ */
+const char *get_version(void)
+{
+ extern const char version[];
+ return version;
+}
diff --git a/common/feat_detect.c b/common/feat_detect.c
index be3e20e..ee34588 100644
--- a/common/feat_detect.c
+++ b/common/feat_detect.c
@@ -254,6 +254,16 @@
#endif
}
+/******************************************************************
+ * Feature : FEAT_RNG_TRAP (Trapping support for RNDR/RNDRRS)
+ *****************************************************************/
+static void read_feat_rng_trap(void)
+{
+#if (ENABLE_FEAT_RNG_TRAP == FEAT_STATE_1)
+ feat_detect_panic(is_feat_rng_trap_present(), "RNG_TRAP");
+#endif
+}
+
/***********************************************************************************
* TF-A supports many Arm architectural features starting from arch version
* (8.0 till 8.7+). These features are mostly enabled through build flags. This
@@ -304,6 +314,7 @@
read_feat_mte();
read_feat_rng();
read_feat_bti();
+ read_feat_rng_trap();
/* v8.6 features */
read_feat_amuv1p1();
diff --git a/docs/design/cpu-specific-build-macros.rst b/docs/design/cpu-specific-build-macros.rst
index 2ddccac..52e1c7d 100644
--- a/docs/design/cpu-specific-build-macros.rst
+++ b/docs/design/cpu-specific-build-macros.rst
@@ -335,6 +335,10 @@
Cortex-A78C CPU. This needs to be enabled for revisions r0p1, r0p2 and
it is still open.
+- ``ERRATA_A78C_2395411`` : This applies errata 2395411 workaround to
+ Cortex-A78C CPU. This needs to be enabled for revisions r0p1 and r0p2. This
+ erratum is still open.
+
For Cortex-X1 CPU, the following errata build flags are defined:
- ``ERRATA_X1_1821534`` : This applies errata 1821534 workaround to Cortex-X1
@@ -390,6 +394,10 @@
For Neoverse V1, the following errata build flags are defined :
+- ``ERRATA_V1_1618635``: This applies errata 1618635 workaround to Neoverse-V1
+ CPU. This needs to be enabled for revision r0p0 of the CPU, it is fixed in
+ r1p0.
+
- ``ERRATA_V1_1774420``: This applies errata 1774420 workaround to Neoverse-V1
CPU. This needs to be enabled only for revisions r0p0 and r1p0, it is fixed
in r1p1.
@@ -468,6 +476,10 @@
Cortex-A710 CPU. This needs to be enabled for revisions r0p0, r1p0 and r2p0
of the CPU and is fixed in r2p1.
+- ``ERRATA_A710_2147715``: This applies errata 2147715 workaround to
+ Cortex-A710 CPU. This needs to be enabled for revision r2p0 of the CPU
+ and is fixed in r2p1.
+
- ``ERRATA_A710_2282622``: This applies errata 2282622 workaround to
Cortex-A710 CPU. This needs to be enabled for revisions r0p0, r1p0 and r2p0
of the CPU and is fixed in r2p1.
@@ -512,6 +524,10 @@
- ``ERRATA_N2_2280757``: This applies errata 2280757 workaround to Neoverse-N2
CPU. This needs to be enabled for revision r0p0 of the CPU and is still open.
+- ``ERRATA_N2_2376738``: This applies errata 2376738 workaround to Neoverse-N2
+ CPU. This needs to be enabled for revision r0p0 of the CPU, it is fixed in
+ r0p1.
+
- ``ERRATA_N2_2388450``: This applies errata 2388450 workaround to Neoverse-N2
CPU. This needs to be enabled for revision r0p0 of the CPU, it is fixed in
r0p1.
@@ -581,6 +597,14 @@
Cortex-A510 CPU. This needs to be enabled for revisions r0p0, r0p1, r0p2,
r0p3 and r1p0, it is fixed in r1p1.
+- ``ERRATA_A510_2347730``: This applies errata 2347730 workaround to
+ Cortex-A510 CPU. This needs to be enabled for revisions r0p0, r0p1, r0p2,
+ r0p3, r1p0 and r1p1. It is fixed in r1p2.
+
+- ``ERRATA_A510_2371937``: This applies errata 2371937 workaround to
+ Cortex-A510 CPU. This needs to applied for revisions r0p0, r0p1, r0p2,
+ r0p3, r1p0, r1p1, and is fixed in r1p2.
+
DSU Errata Workarounds
----------------------
diff --git a/docs/getting_started/build-options.rst b/docs/getting_started/build-options.rst
index dc18941..cca76c6 100644
--- a/docs/getting_started/build-options.rst
+++ b/docs/getting_started/build-options.rst
@@ -313,7 +313,13 @@
- ``ENABLE_FEAT_RNG``: Numeric value to enable the ``FEAT_RNG`` extension.
``FEAT_RNG`` is an optional feature available on Arm v8.5 onwards. This
flag can take the values 0 to 2, to align with the ``FEATURE_DETECTION``
- mechanism. Default is ``0``.
+ mechanism. Default value is ``0``.
+
+- ``ENABLE_FEAT_RNG_TRAP``: Numeric value to enable the ``FEAT_RNG_TRAP``
+ extension. This feature is only supported in AArch64 state. This flag can
+ take values 0 to 2, to align with the ``FEATURE_DETECTION`` mechanism.
+ Default value is ``0``. ``FEAT_RNG_TRAP`` is an optional feature from
+ Armv8.5 onwards.
- ``ENABLE_FEAT_SB``: Numeric value to enable the ``FEAT_SB`` (Speculation
Barrier) extension allowing access to ``sb`` instruction. ``FEAT_SB`` is an
@@ -461,8 +467,11 @@
- ``EL3_EXCEPTION_HANDLING``: When set to ``1``, enable handling of exceptions
targeted at EL3. When set ``0`` (default), no exceptions are expected or
- handled at EL3, and a panic will result. This is supported only for AArch64
- builds.
+ handled at EL3, and a panic will result. The exception to this rule is when
+ ``SPMD_SPM_AT_SEL2`` is set to ``1``, in which case, only exceptions
+ occuring during normal world execution, are trapped to EL3. Any exception
+ trapped during secure world execution are trapped to the SPMC. This is
+ supported only for AArch64 builds.
- ``EVENT_LOG_LEVEL``: Chooses the log level to use for Measured Boot when
``MEASURED_BOOT`` is enabled. For a list of valid values, see ``LOG_LEVEL``.
diff --git a/docs/plat/index.rst b/docs/plat/index.rst
index 0cef16a..1f497e0 100644
--- a/docs/plat/index.rst
+++ b/docs/plat/index.rst
@@ -21,6 +21,7 @@
marvell/index
mt8183
mt8186
+ mt8188
mt8192
mt8195
nvidia-tegra
diff --git a/docs/plat/marvell/armada/uart-booting.rst b/docs/plat/marvell/armada/uart-booting.rst
new file mode 100644
index 0000000..06601d1
--- /dev/null
+++ b/docs/plat/marvell/armada/uart-booting.rst
@@ -0,0 +1,103 @@
+TF-A UART Booting Instructions for Marvell Platforms
+====================================================
+
+This section describes how to temporary boot the Trusted Firmware-A (TF-A) project over UART
+without flashing it to non-volatile storage for Marvell's platforms.
+
+See :ref:`TF-A Build Instructions for Marvell Platforms` how to build ``mrvl_uart`` and
+``mrvl_flash`` targets used in this section.
+
+Armada37x0 UART image downloading
+---------------------------------
+
+There are two options how to download UART image into any Armada37x0 board.
+
+Marvell Wtpdownloader
+~~~~~~~~~~~~~~~~~~~~~
+
+Marvell Wtpdownloader works only with UART images stored in separate files and supports only upload
+speed with 115200 bauds. Target ``mrvl_uart`` produces GZIPed TAR archive ``uart-images.tgz.bin``
+with either three files ``TIM_ATF.bin``, ``wtmi_h.bin`` and ``boot-image_h.bin`` for non-secure
+boot or with four files ``TIM_ATF_TRUSTED.bin``, ``TIMN_ATF_TRUSTED.bin``, ``wtmi_h.bin`` and
+``boot-image_h.bin`` when secure boot is enabled.
+
+Compilation:
+
+.. code:: shell
+
+ > git clone https://github.com/MarvellEmbeddedProcessors/A3700-utils-marvell.git
+ > make -C A3700-utils-marvell/wtptp/src/Wtpdownloader_Linux -f makefile.mk
+
+It produces executable binary ``A3700-utils-marvell/wtptp/src/Wtpdownloader_Linux/WtpDownload_linux``
+
+To download images from ``uart-images.tgz.bin`` archive unpack it and for non-secure boot variant run:
+
+.. code:: shell
+
+ > stty -F /dev/ttyUSB<port#> clocal
+ > WtpDownload_linux -P UART -C <port#> -E -B TIM_ATF.bin -I wtmi_h.bin -I boot-image_h.bin
+
+After that immediately start terminal on ``/dev/ttyUSB<port#>`` to see boot output.
+
+CZ.NIC mox-imager
+~~~~~~~~~~~~~~~~~
+
+CZ.NIC mox-imager supports all Armada37x0 boards (not only Turris MOX as name suggests). It works
+with either with separate files from ``uart-images.tgz.bin`` archive (like Marvell Wtpdownloader)
+produced by ``mrvl_uart`` target or also with ``flash-image.bin`` file produced by ``mrvl_flash``
+target, which is the exactly same file as used for flashing. So when using CZ.NIC mox-imager there
+is no need to build separate files for UART flashing like in case with Marvell Wtpdownloader.
+
+CZ.NIC mox-imager moreover supports higher upload speeds up to the 6000000 bauds (which seems to
+be limit of Armada37x0 SoC) which is much higher and faster than Marvell Wtpdownloader.
+
+Compilation:
+
+.. code:: shell
+
+ > git clone https://gitlab.nic.cz/turris/mox-imager.git
+ > make -C mox-imager
+
+It produces executable binary ``mox-imager/mox-imager``
+
+To download single file image built by ``mrvl_flash`` target at the highest speed, run:
+
+.. code:: shell
+
+ > mox-imager -D /dev/ttyUSB<port#> -E -b 6000000 -t flash-image.bin
+
+To download images from ``uart-images.tgz.bin`` archive built by ``mrvl_uart`` target for
+non-secure boot variant (like Wtpdownloader) but at the highest speed, first unpack
+``uart-images.tgz.bin`` archive and then run:
+
+.. code:: shell
+
+ > mox-imager -D /dev/ttyUSB<port#> -E -b 6000000 -t TIM_ATF.bin wtmi_h.bin boot-image_h.bin
+
+CZ.NIC mox-imager after successful download will start its own mini terminal (option ``-t``) to
+not loose any boot output. It also prints boot output which is sent either by image files or by
+bootrom during transferring of image files. This mini terminal can be quit by CTRL-\\ + C keypress.
+
+
+A7K/8K/CN913x UART image downloading
+------------------------------------
+
+A7K/8K/CN913x uses same image ``flash-image.bin`` for both flashing and booting over UART.
+For downloading image over UART it is possible to use mvebu64boot tool.
+
+Compilation:
+
+.. code:: shell
+
+ > git clone https://github.com/pali/mvebu64boot.git
+ > make -C mvebu64boot
+
+It produces executable binary ``mvebu64boot/mvebu64boot``
+
+To download ``flash-image.bin`` image run:
+
+.. code:: shell
+
+ > mvebu64boot -t -b flash-image.bin /dev/ttyUSB0
+
+After successful download it will start own mini terminal (option ``-t``) like CZ.NIC mox-imager.
diff --git a/docs/plat/marvell/index.rst b/docs/plat/marvell/index.rst
index 0d33432..2d5cdeb 100644
--- a/docs/plat/marvell/index.rst
+++ b/docs/plat/marvell/index.rst
@@ -6,6 +6,7 @@
:caption: Contents
armada/build
+ armada/uart-booting
armada/porting
armada/misc/mvebu-a8k-addr-map
armada/misc/mvebu-amb
diff --git a/docs/plat/mt8188.rst b/docs/plat/mt8188.rst
new file mode 100644
index 0000000..93abaa5
--- /dev/null
+++ b/docs/plat/mt8188.rst
@@ -0,0 +1,21 @@
+MediaTek 8188
+=============
+
+MediaTek 8188 (MT8188) is a 64-bit ARM SoC introduced by MediaTek in 2022.
+The chip incorporates eight cores - six Cortex-A55 little cores and two Cortex-A78.
+Cortex-A78 can operate at up to 2.6 GHz.
+Cortex-A55 can operate at up to 2.0 GHz.
+
+Boot Sequence
+-------------
+
+::
+
+ Boot Rom --> Coreboot --> TF-A BL31 --> Depthcharge --> Linux Kernel
+
+ How to Build
+ ------------
+
+ .. code:: shell
+
+ make CROSS_COMPILE=aarch64-linux-gnu- LD=aarch64-linux-gnu-gcc PLAT=mt8188 DEBUG=1 COREBOOT=1
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 116afda..1b6e96b 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -25,6 +25,7 @@
static const struct mmc_ops *ops;
static unsigned int mmc_ocr_value;
static struct mmc_csd_emmc mmc_csd;
+static struct sd_switch_status sd_switch_func_status;
static unsigned char mmc_ext_csd[512] __aligned(16);
static unsigned int mmc_flags;
static struct mmc_device_info *mmc_dev_info;
@@ -44,6 +45,11 @@
return ((mmc_flags & MMC_FLAG_CMD23) != 0U);
}
+static bool is_sd_cmd6_enabled(void)
+{
+ return ((mmc_flags & MMC_FLAG_SD_CMD6) != 0U);
+}
+
static int mmc_send_cmd(unsigned int idx, unsigned int arg,
unsigned int r_type, unsigned int *r_data)
{
@@ -357,6 +363,33 @@
return 0;
}
+static int sd_switch(unsigned int mode, unsigned char group,
+ unsigned char func)
+{
+ unsigned int group_shift = (group - 1U) * 4U;
+ unsigned int group_mask = GENMASK(group_shift + 3U, group_shift);
+ unsigned int arg;
+ int ret;
+
+ ret = ops->prepare(0, (uintptr_t)&sd_switch_func_status,
+ sizeof(sd_switch_func_status));
+ if (ret != 0) {
+ return ret;
+ }
+
+ /* MMC CMD6: SWITCH_FUNC */
+ arg = mode | SD_SWITCH_ALL_GROUPS_MASK;
+ arg &= ~group_mask;
+ arg |= func << group_shift;
+ ret = mmc_send_cmd(MMC_CMD(6), arg, MMC_RESPONSE_R1, NULL);
+ if (ret != 0) {
+ return ret;
+ }
+
+ return ops->read(0, (uintptr_t)&sd_switch_func_status,
+ sizeof(sd_switch_func_status));
+}
+
static int sd_send_op_cond(void)
{
int n;
@@ -524,7 +557,39 @@
return ret;
}
- return mmc_fill_device_info();
+ ret = mmc_fill_device_info();
+ if (ret != 0) {
+ return ret;
+ }
+
+ if (is_sd_cmd6_enabled() &&
+ (mmc_dev_info->mmc_dev_type == MMC_IS_SD_HC)) {
+ /* Try to switch to High Speed Mode */
+ ret = sd_switch(SD_SWITCH_FUNC_CHECK, 1U, 1U);
+ if (ret != 0) {
+ return ret;
+ }
+
+ if ((sd_switch_func_status.support_g1 & BIT(9)) == 0U) {
+ /* High speed not supported, keep default speed */
+ return 0;
+ }
+
+ ret = sd_switch(SD_SWITCH_FUNC_SWITCH, 1U, 1U);
+ if (ret != 0) {
+ return ret;
+ }
+
+ if ((sd_switch_func_status.sel_g2_g1 & 0x1U) == 0U) {
+ /* Cannot switch to high speed, keep default speed */
+ return 0;
+ }
+
+ mmc_dev_info->max_bus_freq = 50000000U;
+ ret = ops->set_ios(clk, bus_width);
+ }
+
+ return ret;
}
size_t mmc_read_blocks(int lba, uintptr_t buf, size_t size)
diff --git a/drivers/mtd/nand/core.c b/drivers/mtd/nand/core.c
index 9f0331a..6ef2256 100644
--- a/drivers/mtd/nand/core.c
+++ b/drivers/mtd/nand/core.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2019-2021, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2019-2022, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -8,18 +8,29 @@
#include <errno.h>
#include <stddef.h>
-#include <platform_def.h>
-
#include <common/debug.h>
#include <drivers/delay_timer.h>
#include <drivers/nand.h>
#include <lib/utils.h>
+#include <platform_def.h>
+
/*
* Define a single nand_device used by specific NAND frameworks.
*/
static struct nand_device nand_dev;
-static uint8_t scratch_buff[PLATFORM_MTD_MAX_PAGE_SIZE];
+
+#pragma weak plat_get_scratch_buffer
+void plat_get_scratch_buffer(void **buffer_addr, size_t *buf_size)
+{
+ static uint8_t scratch_buff[PLATFORM_MTD_MAX_PAGE_SIZE];
+
+ assert(buffer_addr != NULL);
+ assert(buf_size != NULL);
+
+ *buffer_addr = (void *)scratch_buff;
+ *buf_size = sizeof(scratch_buff);
+}
int nand_read(unsigned int offset, uintptr_t buffer, size_t length,
size_t *length_read)
@@ -34,6 +45,12 @@
unsigned int bytes_read;
int is_bad;
int ret;
+ uint8_t *scratch_buff;
+ size_t scratch_buff_size;
+
+ plat_get_scratch_buffer((void **)&scratch_buff, &scratch_buff_size);
+
+ assert(scratch_buff != NULL);
VERBOSE("Block %u - %u, page_start %u, nb %u, length %zu, offset %u\n",
block, end_block, page_start, nb_pages, length, offset);
@@ -41,7 +58,7 @@
*length_read = 0UL;
if (((start_offset != 0U) || (length % nand_dev.page_size) != 0U) &&
- (sizeof(scratch_buff) < nand_dev.page_size)) {
+ (scratch_buff_size < nand_dev.page_size)) {
return -EINVAL;
}
diff --git a/drivers/st/clk/clk-stm32-core.c b/drivers/st/clk/clk-stm32-core.c
index 8584a52..bb03125 100644
--- a/drivers/st/clk/clk-stm32-core.c
+++ b/drivers/st/clk/clk-stm32-core.c
@@ -215,24 +215,6 @@
return 0;
}
-const char *_clk_stm32_get_name(struct stm32_clk_priv *priv, int id)
-{
- return priv->clks[id].name;
-}
-
-const char *clk_stm32_get_name(struct stm32_clk_priv *priv,
- unsigned long binding_id)
-{
- int id;
-
- id = clk_get_index(priv, binding_id);
- if (id == -EINVAL) {
- return NULL;
- }
-
- return _clk_stm32_get_name(priv, id);
-}
-
const struct clk_stm32 *_clk_get(struct stm32_clk_priv *priv, int id)
{
if ((unsigned int)id < priv->num) {
diff --git a/drivers/st/clk/clk-stm32-core.h b/drivers/st/clk/clk-stm32-core.h
index 809d05f..8bfb513 100644
--- a/drivers/st/clk/clk-stm32-core.h
+++ b/drivers/st/clk/clk-stm32-core.h
@@ -54,7 +54,6 @@
};
struct clk_stm32 {
- const char *name;
uint16_t binding;
uint16_t parent;
uint8_t flags;
@@ -163,8 +162,6 @@
int clk_oscillator_wait_ready_on(struct stm32_clk_priv *priv, int id);
int clk_oscillator_wait_ready_off(struct stm32_clk_priv *priv, int id);
-const char *_clk_stm32_get_name(struct stm32_clk_priv *priv, int id);
-const char *clk_stm32_get_name(struct stm32_clk_priv *priv, unsigned long binding_id);
int clk_stm32_get_counter(unsigned long binding_id);
void _clk_stm32_gate_disable(struct stm32_clk_priv *priv, uint16_t gate_id);
@@ -226,7 +223,6 @@
#define STM32_DIV(idx, _binding, _parent, _flags, _div_id) \
[(idx)] = (struct clk_stm32){ \
- .name = #idx,\
.binding = (_binding),\
.parent = (_parent),\
.flags = (_flags),\
@@ -242,7 +238,6 @@
#define STM32_GATE(idx, _binding, _parent, _flags, _gate_id) \
[(idx)] = (struct clk_stm32){ \
- .name = #idx,\
.binding = (_binding),\
.parent = (_parent),\
.flags = (_flags),\
@@ -262,7 +257,6 @@
#define FIXED_FACTOR(idx, _idx, _parent, _mult, _div) \
[(idx)] = (struct clk_stm32){ \
- .name = #idx,\
.binding = (_idx),\
.parent = (_parent),\
.clock_cfg = &(struct fixed_factor_cfg){\
@@ -274,7 +268,6 @@
#define GATE(idx, _binding, _parent, _flags, _offset, _bit_idx) \
[(idx)] = (struct clk_stm32){ \
- .name = #idx,\
.binding = (_binding),\
.parent = (_parent),\
.flags = (_flags),\
@@ -287,7 +280,6 @@
#define STM32_MUX(idx, _binding, _mux_id, _flags) \
[(idx)] = (struct clk_stm32){ \
- .name = #idx,\
.binding = (_binding),\
.parent = (MUX(_mux_id)),\
.flags = (_flags),\
@@ -302,7 +294,6 @@
#define CK_TIMER(idx, _idx, _parent, _flags, _apbdiv, _timpre) \
[(idx)] = (struct clk_stm32){ \
- .name = #idx,\
.binding = (_idx),\
.parent = (_parent),\
.flags = (CLK_SET_RATE_PARENT | (_flags)),\
@@ -319,7 +310,6 @@
#define CLK_FIXED_RATE(idx, _binding, _rate) \
[(idx)] = (struct clk_stm32){ \
- .name = #idx,\
.binding = (_binding),\
.parent = (CLK_IS_ROOT),\
.clock_cfg = &(struct clk_stm32_fixed_rate_cfg){\
@@ -370,7 +360,6 @@
#define CLK_OSC(idx, _idx, _parent, _osc_id) \
[(idx)] = (struct clk_stm32){ \
- .name = #idx,\
.binding = (_idx),\
.parent = (_parent),\
.flags = CLK_IS_CRITICAL,\
@@ -382,7 +371,6 @@
#define CLK_OSC_FIXED(idx, _idx, _parent, _osc_id) \
[(idx)] = (struct clk_stm32){ \
- .name = #idx,\
.binding = (_idx),\
.parent = (_parent),\
.flags = CLK_IS_CRITICAL,\
diff --git a/drivers/st/clk/clk-stm32mp13.c b/drivers/st/clk/clk-stm32mp13.c
index d360767..c960928 100644
--- a/drivers/st/clk/clk-stm32mp13.c
+++ b/drivers/st/clk/clk-stm32mp13.c
@@ -1705,7 +1705,6 @@
};
#define CLK_PLL(idx, _idx, _parent, _gate, _pll_id, _flags)[idx] = {\
- .name = #idx,\
.binding = _idx,\
.parent = _parent,\
.flags = (_flags),\
@@ -1762,7 +1761,6 @@
#define STM32_COMPOSITE(idx, _binding, _parent, _flags, _gate_id,\
_div_id)[idx] = {\
- .name = #idx,\
.binding = (_binding),\
.parent = (_parent),\
.flags = (_flags),\
diff --git a/drivers/st/clk/stm32mp1_clk.c b/drivers/st/clk/stm32mp1_clk.c
index 534ee3b..aa5db6f 100644
--- a/drivers/st/clk/stm32mp1_clk.c
+++ b/drivers/st/clk/stm32mp1_clk.c
@@ -232,7 +232,6 @@
struct stm32mp1_pll {
uint8_t refclk_min;
uint8_t refclk_max;
- uint8_t divn_max;
};
struct stm32mp1_clk_gate {
@@ -543,12 +542,10 @@
[PLL_800] = {
.refclk_min = 4,
.refclk_max = 16,
- .divn_max = 99,
},
[PLL_1600] = {
.refclk_min = 8,
.refclk_max = 16,
- .divn_max = 199,
},
};
diff --git a/drivers/st/etzpc/etzpc.c b/drivers/st/etzpc/etzpc.c
index ff52a22..4c3c26d 100644
--- a/drivers/st/etzpc/etzpc.c
+++ b/drivers/st/etzpc/etzpc.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2017-2020, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2017-2022, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -225,20 +225,8 @@
int etzpc_init(void)
{
uint32_t hwcfg;
- int node;
- struct dt_node_info etzpc_info;
-
- node = dt_get_node(&etzpc_info, -1, ETZPC_COMPAT);
- if (node < 0) {
- return -EIO;
- }
-
- /* Check ETZPC is secure only */
- if (etzpc_info.status != DT_SECURE) {
- return -EACCES;
- }
- etzpc_dev.base = etzpc_info.base;
+ etzpc_dev.base = STM32MP1_ETZPC_BASE;
hwcfg = mmio_read_32(etzpc_dev.base + ETZPC_HWCFGR);
diff --git a/drivers/st/mmc/stm32_sdmmc2.c b/drivers/st/mmc/stm32_sdmmc2.c
index 40641b5..6bdd782 100644
--- a/drivers/st/mmc/stm32_sdmmc2.c
+++ b/drivers/st/mmc/stm32_sdmmc2.c
@@ -129,6 +129,8 @@
#define DT_SDMMC2_COMPAT "st,stm32-sdmmc2"
#endif
+#define SDMMC_FIFO_SIZE 64U
+
static void stm32_sdmmc2_init(void);
static int stm32_sdmmc2_send_cmd_req(struct mmc_cmd *cmd);
static int stm32_sdmmc2_send_cmd(struct mmc_cmd *cmd);
@@ -148,6 +150,8 @@
static struct stm32_sdmmc2_params sdmmc2_params;
+static bool next_cmd_is_acmd;
+
#pragma weak plat_sdmmc2_use_dma
bool plat_sdmmc2_use_dma(unsigned int instance, unsigned int memory)
{
@@ -257,6 +261,20 @@
case MMC_CMD(1):
arg_reg |= OCR_POWERUP;
break;
+ case MMC_CMD(6):
+ if ((sdmmc2_params.device_info->mmc_dev_type == MMC_IS_SD_HC) &&
+ (!next_cmd_is_acmd)) {
+ cmd_reg |= SDMMC_CMDR_CMDTRANS;
+ if (sdmmc2_params.use_dma) {
+ flags_data |= SDMMC_STAR_DCRCFAIL |
+ SDMMC_STAR_DTIMEOUT |
+ SDMMC_STAR_DATAEND |
+ SDMMC_STAR_RXOVERR |
+ SDMMC_STAR_IDMATE |
+ SDMMC_STAR_DBCKEND;
+ }
+ }
+ break;
case MMC_CMD(8):
if (sdmmc2_params.device_info->mmc_dev_type == MMC_IS_EMMC) {
cmd_reg |= SDMMC_CMDR_CMDTRANS;
@@ -294,6 +312,8 @@
break;
}
+ next_cmd_is_acmd = (cmd->cmd_idx == MMC_CMD(55));
+
mmio_write_32(base + SDMMC_ICR, SDMMC_STATIC_FLAGS);
/*
@@ -301,8 +321,7 @@
* Skip CMD55 as the next command could be data related, and
* the register could have been set in prepare function.
*/
- if (((cmd_reg & SDMMC_CMDR_CMDTRANS) == 0U) &&
- (cmd->cmd_idx != MMC_CMD(55))) {
+ if (((cmd_reg & SDMMC_CMDR_CMDTRANS) == 0U) && !next_cmd_is_acmd) {
mmio_write_32(base + SDMMC_DCTRLR, 0U);
}
@@ -627,7 +646,7 @@
return -ETIMEDOUT;
}
- if (size < (8U * sizeof(uint32_t))) {
+ if (size < (SDMMC_FIFO_SIZE / 2U)) {
if ((mmio_read_32(base + SDMMC_DCNTR) > 0U) &&
((status & SDMMC_STAR_RXFIFOE) == 0U)) {
*buffer = mmio_read_32(fifo_reg);
@@ -637,7 +656,8 @@
uint32_t count;
/* Read data from SDMMC Rx FIFO */
- for (count = 0; count < 8U; count++) {
+ for (count = 0; count < (SDMMC_FIFO_SIZE / 2U);
+ count += sizeof(uint32_t)) {
*buffer = mmio_read_32(fifo_reg);
buffer++;
}
@@ -737,8 +757,6 @@
int stm32_sdmmc2_mmc_init(struct stm32_sdmmc2_params *params)
{
- int rc;
-
assert((params != NULL) &&
((params->reg_base & MMC_BLOCK_MASK) == 0U) &&
((params->bus_width == MMC_BUS_WIDTH_1) ||
@@ -756,16 +774,20 @@
clk_enable(sdmmc2_params.clock_id);
- rc = stm32mp_reset_assert(sdmmc2_params.reset_id, TIMEOUT_US_1_MS);
- if (rc != 0) {
- panic();
- }
- udelay(2);
- rc = stm32mp_reset_deassert(sdmmc2_params.reset_id, TIMEOUT_US_1_MS);
- if (rc != 0) {
- panic();
+ if ((int)sdmmc2_params.reset_id >= 0) {
+ int rc;
+
+ rc = stm32mp_reset_assert(sdmmc2_params.reset_id, TIMEOUT_US_1_MS);
+ if (rc != 0) {
+ panic();
+ }
+ udelay(2);
+ rc = stm32mp_reset_deassert(sdmmc2_params.reset_id, TIMEOUT_US_1_MS);
+ if (rc != 0) {
+ panic();
+ }
+ mdelay(1);
}
- mdelay(1);
sdmmc2_params.clk_rate = clk_get_rate(sdmmc2_params.clock_id);
sdmmc2_params.device_info->ocr_voltage = OCR_3_2_3_3 | OCR_3_3_3_4;
diff --git a/drivers/ufs/ufs.c b/drivers/ufs/ufs.c
index 2c9bab7..754d173 100644
--- a/drivers/ufs/ufs.c
+++ b/drivers/ufs/ufs.c
@@ -264,7 +264,7 @@
/* clear utrd */
memset((void *)utrd, 0, sizeof(utp_utrd_t));
- base = ufs_params.desc_base + (slot * UFS_DESC_SIZE);
+ base = ufs_params.desc_base + (slot * sizeof(utrd_header_t));
/* clear the descriptor */
memset((void *)base, 0, UFS_DESC_SIZE);
@@ -299,12 +299,6 @@
unsigned int lba_cnt;
int prdt_size;
-
- mmio_write_32(ufs_params.reg_base + UTRLBA,
- utrd->header & UINT32_MAX);
- mmio_write_32(ufs_params.reg_base + UTRLBAU,
- (utrd->header >> 32) & UINT32_MAX);
-
hd = (utrd_header_t *)utrd->header;
upiu = (cmd_upiu_t *)utrd->upiu;
@@ -402,12 +396,6 @@
hd = (utrd_header_t *)utrd->header;
query_upiu = (query_upiu_t *)utrd->upiu;
- mmio_write_32(ufs_params.reg_base + UTRLBA,
- utrd->header & UINT32_MAX);
- mmio_write_32(ufs_params.reg_base + UTRLBAU,
- (utrd->header >> 32) & UINT32_MAX);
-
-
hd->i = 1;
hd->ct = CT_UFS_STORAGE;
hd->ocs = OCS_MASK;
@@ -454,11 +442,6 @@
utrd_header_t *hd;
nop_out_upiu_t *nop_out;
- mmio_write_32(ufs_params.reg_base + UTRLBA,
- utrd->header & UINT32_MAX);
- mmio_write_32(ufs_params.reg_base + UTRLBAU,
- (utrd->header >> 32) & UINT32_MAX);
-
hd = (utrd_header_t *)utrd->header;
nop_out = (nop_out_upiu_t *)utrd->upiu;
@@ -795,6 +778,11 @@
unsigned int blk_num, blk_size;
int i, result;
+ mmio_write_32(ufs_params.reg_base + UTRLBA,
+ ufs_params.desc_base & UINT32_MAX);
+ mmio_write_32(ufs_params.reg_base + UTRLBAU,
+ (ufs_params.desc_base >> 32) & UINT32_MAX);
+
ufs_verify_init();
ufs_verify_ready();
@@ -856,6 +844,11 @@
if (ufs_params.flags & UFS_FLAGS_SKIPINIT) {
+ mmio_write_32(ufs_params.reg_base + UTRLBA,
+ ufs_params.desc_base & UINT32_MAX);
+ mmio_write_32(ufs_params.reg_base + UTRLBAU,
+ (ufs_params.desc_base >> 32) & UINT32_MAX);
+
result = ufshc_dme_get(0x1571, 0, &data);
assert(result == 0);
result = ufshc_dme_get(0x41, 0, &data);
diff --git a/fdts/stm32mp13-bl2.dtsi b/fdts/stm32mp13-bl2.dtsi
index 00bf1b5..4e3701c 100644
--- a/fdts/stm32mp13-bl2.dtsi
+++ b/fdts/stm32mp13-bl2.dtsi
@@ -9,70 +9,12 @@
/delete-property/ mmc0;
/delete-property/ mmc1;
#endif
- /delete-property/ ethernet0;
- /delete-property/ ethernet1;
};
- cpus {
- cpu@0 {
- /delete-property/ operating-points-v2;
- };
- };
-
- /delete-node/ cpu0-opp-table;
- /delete-node/ psci;
-
soc {
- /delete-node/ sram@30000000;
- /delete-node/ timer@40000000;
- /delete-node/ timer@40001000;
- /delete-node/ timer@40002000;
- /delete-node/ timer@40003000;
- /delete-node/ timer@40004000;
- /delete-node/ timer@40005000;
- /delete-node/ timer@40009000;
- /delete-node/ spi@4000b000;
- /delete-node/ audio-controller@4000b000;
- /delete-node/ spi@4000c000;
- /delete-node/ audio-controller@4000c000;
- /delete-node/ audio-controller@4000d000;
- /delete-node/ i2c@40012000;
- /delete-node/ i2c@40013000;
- /delete-node/ timer@44000000;
- /delete-node/ timer@44001000;
- /delete-node/ spi@44004000;
- /delete-node/ audio-controller@44004000;
- /delete-node/ sai@4400a000;
- /delete-node/ sai@4400b000;
- /delete-node/ dfsdm@4400d000;
- /delete-node/ can@4400e000;
- /delete-node/ can@4400f000;
- /delete-node/ dma-controller@48000000;
- /delete-node/ dma-controller@48001000;
- /delete-node/ dma-router@48002000;
- /delete-node/ adc@48003000;
- /delete-node/ adc@48004000;
- /delete-node/ dma@48005000;
- /delete-node/ dma-router@48006000;
#if !STM32MP_USB_PROGRAMMER
/delete-node/ usb-otg@49000000;
#endif
- /delete-node/ spi@4c002000;
- /delete-node/ spi@4c003000;
- /delete-node/ timer@4c007000;
- /delete-node/ timer@4c008000;
- /delete-node/ timer@4c009000;
- /delete-node/ timer@4c00a000;
- /delete-node/ timer@4c00b000;
- /delete-node/ timer@4c00c000;
- /delete-node/ timer@50021000;
- /delete-node/ timer@50022000;
- /delete-node/ timer@50023000;
- /delete-node/ timer@50024000;
- /delete-node/ vrefbuf@50025000;
- /delete-node/ thermal@50028000;
- /delete-node/ hdp@5002a000;
- /delete-node/ dma-controller@58000000;
#if !STM32MP_RAW_NAND
/delete-node/ memory-controller@58002000;
#endif
@@ -83,23 +25,13 @@
/delete-node/ mmc@58005000;
/delete-node/ mmc@58007000;
#endif
- /delete-node/ crc@58009000;
- /delete-node/ stmmac-axi-config;
- /delete-node/ eth1@5800a000;
#if !STM32MP_USB_PROGRAMMER
/delete-node/ usbh-ohci@5800c000;
/delete-node/ usbh-ehci@5800d000;
#endif
- /delete-node/ eth2@5800e000;
- /delete-node/ dcmipp@5a000000;
- /delete-node/ display-controller@5a001000;
#if !STM32MP_USB_PROGRAMMER
/delete-node/ usbphyc@5a006000;
#endif
- /delete-node/ perf@5a007000;
- /delete-node/ rtc@5c004000;
- /delete-node/ tamp@5c00a000;
- /delete-node/ stgen@5c008000;
pinctrl@50002000 {
#if !STM32MP_EMMC && !STM32MP_SDMMC
diff --git a/fdts/stm32mp13-fw-config.dtsi b/fdts/stm32mp13-fw-config.dtsi
index 28f7086..4f3bb72 100644
--- a/fdts/stm32mp13-fw-config.dtsi
+++ b/fdts/stm32mp13-fw-config.dtsi
@@ -13,7 +13,7 @@
#endif
#define DDR_NS_BASE STM32MP_DDR_BASE
-#define DDR_SEC_SIZE 0x02000000
+#define DDR_SEC_SIZE STM32MP_DDR_S_SIZE
#define DDR_SEC_BASE (STM32MP_DDR_BASE + (DDR_SIZE - DDR_SEC_SIZE))
#define DDR_NS_SIZE (DDR_SEC_BASE - DDR_NS_BASE)
diff --git a/fdts/stm32mp13-pinctrl.dtsi b/fdts/stm32mp13-pinctrl.dtsi
index 0ad06a4..879da9c 100644
--- a/fdts/stm32mp13-pinctrl.dtsi
+++ b/fdts/stm32mp13-pinctrl.dtsi
@@ -17,7 +17,7 @@
};
sdmmc1_b4_pins_a: sdmmc1-b4-0 {
- pins1 {
+ pins {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
<STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
@@ -27,16 +27,19 @@
drive-push-pull;
bias-disable;
};
- pins2 {
+ };
+
+ sdmmc1_clk_pins_a: sdmmc1-clk-0 {
+ pins {
pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
- slew-rate = <2>;
+ slew-rate = <1>;
drive-push-pull;
bias-disable;
};
};
sdmmc2_b4_pins_a: sdmmc2-b4-0 {
- pins1 {
+ pins {
pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
<STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
<STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
@@ -46,9 +49,12 @@
drive-push-pull;
bias-pull-up;
};
- pins2 {
+ };
+
+ sdmmc2_clk_pins_a: sdmmc2-clk-0 {
+ pins {
pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */
- slew-rate = <2>;
+ slew-rate = <1>;
drive-push-pull;
bias-pull-up;
};
diff --git a/fdts/stm32mp131.dtsi b/fdts/stm32mp131.dtsi
index e4d9d3b..2c62408 100644
--- a/fdts/stm32mp131.dtsi
+++ b/fdts/stm32mp131.dtsi
@@ -259,15 +259,6 @@
clocks = <&rcc SYSCFG>;
};
- vrefbuf: vrefbuf@50025000 {
- compatible = "st,stm32-vrefbuf";
- reg = <0x50025000 0x8>;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <2500000>;
- clocks = <&rcc VREF>;
- status = "disabled";
- };
-
hash: hash@54003000 {
compatible = "st,stm32mp13-hash";
reg = <0x54003000 0x400>;
@@ -333,7 +324,7 @@
resets = <&rcc SDMMC1_R>;
cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <120000000>;
+ max-frequency = <130000000>;
status = "disabled";
};
@@ -346,16 +337,10 @@
resets = <&rcc SDMMC2_R>;
cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <120000000>;
+ max-frequency = <130000000>;
status = "disabled";
};
- crc1: crc@58009000 {
- compatible = "st,stm32f7-crc";
- reg = <0x58009000 0x400>;
- clocks = <&rcc CRC1>;
- };
-
usbh_ohci: usbh-ohci@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
@@ -471,11 +456,6 @@
st,non-secure-otp;
};
};
-
- tamp: tamp@5c00a000 {
- reg = <0x5c00a000 0x400>;
- };
-
/*
* Break node order to solve dependency probe issue between
* pinctrl and exti.
diff --git a/fdts/stm32mp133.dtsi b/fdts/stm32mp133.dtsi
index 8bbcc61..bb468c0 100644
--- a/fdts/stm32mp133.dtsi
+++ b/fdts/stm32mp133.dtsi
@@ -5,17 +5,3 @@
*/
#include "stm32mp131.dtsi"
-
-/ {
- soc {
- m_can1: can@4400e000 {
- reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
- status = "disabled";
- };
-
- m_can2: can@4400f000 {
- reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
- status = "disabled";
- };
- };
-};
diff --git a/fdts/stm32mp135.dtsi b/fdts/stm32mp135.dtsi
index 415bb9b..b5ebdd9 100644
--- a/fdts/stm32mp135.dtsi
+++ b/fdts/stm32mp135.dtsi
@@ -5,8 +5,3 @@
*/
#include "stm32mp133.dtsi"
-
-/ {
- soc {
- };
-};
diff --git a/fdts/stm32mp135f-dk.dts b/fdts/stm32mp135f-dk.dts
index 6240381..e58be40 100644
--- a/fdts/stm32mp135f-dk.dts
+++ b/fdts/stm32mp135f-dk.dts
@@ -303,7 +303,7 @@
&sdmmc1 {
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
disable-wp;
st,neg-edge;
bus-width = <4>;
diff --git a/fdts/stm32mp13xc.dtsi b/fdts/stm32mp13xc.dtsi
index c03bd43..4b30c5c 100644
--- a/fdts/stm32mp13xc.dtsi
+++ b/fdts/stm32mp13xc.dtsi
@@ -8,15 +8,6 @@
/ {
soc {
- cryp: crypto@54002000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
-
saes: saes@54005000 {
compatible = "st,stm32-saes";
reg = <0x54005000 0x400>;
diff --git a/fdts/stm32mp13xf.dtsi b/fdts/stm32mp13xf.dtsi
index e467d71..887c4e0 100644
--- a/fdts/stm32mp13xf.dtsi
+++ b/fdts/stm32mp13xf.dtsi
@@ -7,15 +7,6 @@
/ {
soc {
- cryp: crypto@54002000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54002000 0x400>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
-
saes: saes@54005000 {
compatible = "st,stm32-saes";
reg = <0x54005000 0x400>;
diff --git a/fdts/stm32mp15-pinctrl.dtsi b/fdts/stm32mp15-pinctrl.dtsi
index 1b5fbc6..7d2be0b 100644
--- a/fdts/stm32mp15-pinctrl.dtsi
+++ b/fdts/stm32mp15-pinctrl.dtsi
@@ -120,6 +120,21 @@
};
};
+ sdmmc1_dir_pins_b: sdmmc1-dir-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('E', 14, AF11)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+ bias-pull-up;
+ };
+ };
+
sdmmc2_b4_pins_a: sdmmc2-b4-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
@@ -182,6 +197,18 @@
};
};
+ sdmmc2_d47_pins_c: sdmmc2-d47-2 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 15, AF9)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
sdmmc2_d47_pins_d: sdmmc2-d47-3 {
pins {
pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
diff --git a/fdts/stm32mp151.dtsi b/fdts/stm32mp151.dtsi
index 575d61e..bb16fda 100644
--- a/fdts/stm32mp151.dtsi
+++ b/fdts/stm32mp151.dtsi
@@ -497,8 +497,6 @@
compatible = "st,stm32-etzpc";
reg = <0x5C007000 0x400>;
clocks = <&rcc TZPC>;
- status = "disabled";
- secure-status = "okay";
};
stgen: stgen@5c008000 {
diff --git a/fdts/stm32mp157a-dhcor-avenger96-fw-config.dts b/fdts/stm32mp157a-dhcor-avenger96-fw-config.dts
new file mode 100644
index 0000000..2abbe50
--- /dev/null
+++ b/fdts/stm32mp157a-dhcor-avenger96-fw-config.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define DDR_SIZE 0x40000000 /* 1GB */
+#include "stm32mp15-fw-config.dtsi"
diff --git a/fdts/stm32mp157a-dhcor-avenger96.dts b/fdts/stm32mp157a-dhcor-avenger96.dts
new file mode 100644
index 0000000..82d48aa
--- /dev/null
+++ b/fdts/stm32mp157a-dhcor-avenger96.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2022 DH electronics GmbH
+ *
+ * DHCOR STM32MP1 variant:
+ * DHCR-STM32MP157A-C065-R102-V18-SPI-C-01LG
+ * DHCOR PCB number: 586-100 or newer
+ * Avenger96 PCB number: 588-200 or newer
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xx-dhcor-som.dtsi"
+#include "stm32mp15xx-dhcor-avenger96.dtsi"
+
+/ {
+ model = "Arrow Electronics STM32MP157A Avenger96 board";
+ compatible = "arrow,stm32mp157a-avenger96", "dh,stm32mp157a-dhcor-som",
+ "st,stm32mp157";
+};
diff --git a/fdts/stm32mp15xx-dhcor-avenger96.dtsi b/fdts/stm32mp15xx-dhcor-avenger96.dtsi
new file mode 100644
index 0000000..576e0f1
--- /dev/null
+++ b/fdts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2022 DH electronics GmbH
+ */
+
+/* Avenger96 uses DHCOR SoM configured for 1V8 IO operation */
+#include "stm32mp15xx-dhcor-io1v8.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart4;
+ serial1 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ sd_switch: regulator-sd_switch {
+ compatible = "regulator-gpio";
+ regulator-name = "sd_switch";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-type = "voltage";
+ regulator-always-on;
+
+ gpios = <&gpioi 5 0>;
+ gpios-states = <0>;
+ states = <1800000 0x1>,
+ <2900000 0x0>;
+ };
+};
+
+&sdmmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
+ disable-wp;
+ st,sig-dir;
+ st,neg-edge;
+ st,use-ckin;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ vqmmc-supply = <&sd_switch>;
+ status = "okay";
+};
+
+&sdmmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ st,neg-edge;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&vdd_io>;
+ status = "okay";
+};
+
+&uart4 {
+ /* On Low speed expansion header */
+ label = "LS-UART1";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_b>;
+ status = "okay";
+};
+
+&uart7 {
+ /* On Low speed expansion header */
+ label = "LS-UART0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg_hs {
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ phy-names = "usb2-phy";
+ phys = <&usbphyc_port1 0>;
+ status = "okay";
+ vbus-supply = <&vbus_otg>;
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+};
diff --git a/fdts/stm32mp15xx-dhcor-io1v8.dtsi b/fdts/stm32mp15xx-dhcor-io1v8.dtsi
new file mode 100644
index 0000000..9937b28
--- /dev/null
+++ b/fdts/stm32mp15xx-dhcor-io1v8.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+/ {
+ /* Enpirion EP3A8LQI U2 on the DHCOR */
+ vdd_io: regulator-buck-io {
+ compatible = "regulator-fixed";
+ regulator-name = "buck-io";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd>;
+ };
+};
+
+&vdd {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd_io>;
+};
diff --git a/fdts/stm32mp15xx-dhcor-som.dtsi b/fdts/stm32mp15xx-dhcor-som.dtsi
new file mode 100644
index 0000000..0774c1d
--- /dev/null
+++ b/fdts/stm32mp15xx-dhcor-som.dtsi
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2022 DH electronics GmbH
+ */
+
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi"
+
+/ {
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x40000000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vddcore>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcore>;
+};
+
+&hash1 {
+ status = "okay";
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo5-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ vdda: ldo1 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ v2v8: ldo2 {
+ regulator-name = "v2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ st,regulator-sink-source;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_sd: ldo5 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+ };
+
+ v1v8: ldo6 {
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <300000>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ regulator-active-discharge = <1>;
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ regulator-active-discharge = <1>;
+ };
+ };
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+ secure-status = "okay";
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+ reg = <0x58003000 0x1000>, <0x70000000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&rcc {
+ secure-status = "disabled";
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MCU_PLL3P
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_LSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_DISABLED
+ >;
+
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 0 /*MCU*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 2 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 0 /*MCO2*/
+ >;
+
+ st,pkcs = <
+ CLK_CKPER_HSE
+ CLK_FMC_ACLK
+ CLK_QSPI_ACLK
+ CLK_ETH_DISABLED
+ CLK_SDMMC12_PLL4P
+ CLK_DSI_DSIPLL
+ CLK_STGEN_HSE
+ CLK_USBPHY_HSE
+ CLK_SPI2S1_PLL3Q
+ CLK_SPI2S23_PLL3Q
+ CLK_SPI45_HSI
+ CLK_SPI6_HSI
+ CLK_I2C46_HSI
+ CLK_SDMMC3_PLL4P
+ CLK_USBO_USBPHY
+ CLK_ADC_CKPER
+ CLK_CEC_LSE
+ CLK_I2C12_HSI
+ CLK_I2C35_HSI
+ CLK_UART1_HSI
+ CLK_UART24_HSI
+ CLK_UART35_HSI
+ CLK_UART6_HSI
+ CLK_UART78_HSI
+ CLK_SPDIF_PLL4P
+ CLK_FDCAN_PLL4R
+ CLK_SAI1_PLL3Q
+ CLK_SAI2_PLL3Q
+ CLK_SAI3_PLL3Q
+ CLK_SAI4_PLL3Q
+ CLK_RNG1_LSI
+ CLK_RNG2_LSI
+ CLK_LPTIM1_PCLK1
+ CLK_LPTIM23_PCLK3
+ CLK_LPTIM45_LSE
+ >;
+
+ /* VCO = 1300.0 MHz => P = 650 (CPU) */
+ pll1: st,pll@0 {
+ compatible = "st,stm32mp1-pll";
+ reg = <0>;
+ cfg = <2 80 0 0 0 PQR(1,0,0)>;
+ frac = <0x800>;
+ };
+
+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+ pll2: st,pll@1 {
+ compatible = "st,stm32mp1-pll";
+ reg = <1>;
+ cfg = <2 65 1 0 0 PQR(1,1,1)>;
+ frac = <0x1400>;
+ };
+
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+ pll3: st,pll@2 {
+ compatible = "st,stm32mp1-pll";
+ reg = <2>;
+ cfg = <1 33 1 16 36 PQR(1,1,1)>;
+ frac = <0x1a04>;
+ };
+
+ /* VCO = 600.0 MHz => P = 99, Q = 74, R = 99 */
+ pll4: st,pll@3 {
+ compatible = "st,stm32mp1-pll";
+ reg = <3>;
+ cfg = <3 98 5 7 5 PQR(1,1,1)>;
+ };
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
diff --git a/include/arch/aarch64/arch.h b/include/arch/aarch64/arch.h
index e55d33f..3a2a032 100644
--- a/include/arch/aarch64/arch.h
+++ b/include/arch/aarch64/arch.h
@@ -353,6 +353,12 @@
#define ID_AA64PFR1_EL1_MTE_SHIFT U(8)
#define ID_AA64PFR1_EL1_MTE_MASK ULL(0xf)
+#define ID_AA64PFR1_EL1_RNDR_TRAP_SHIFT U(28)
+#define ID_AA64PFR1_EL1_RNDR_TRAP_MASK U(0xf)
+
+#define ID_AA64PFR1_EL1_RNG_TRAP_SUPPORTED ULL(0x1)
+#define ID_AA64PFR1_EL1_RNG_TRAP_NOT_SUPPORTED ULL(0x0)
+
/* Memory Tagging Extension is not implemented */
#define MTE_UNIMPLEMENTED U(0)
/* FEAT_MTE: MTE instructions accessible at EL0 are implemented */
@@ -485,6 +491,7 @@
#define SCR_GPF_BIT (UL(1) << 48)
#define SCR_TWEDEL_SHIFT U(30)
#define SCR_TWEDEL_MASK ULL(0xf)
+#define SCR_TRNDR_BIT (UL(1) << 40)
#define SCR_HXEn_BIT (UL(1) << 38)
#define SCR_ENTP2_SHIFT U(41)
#define SCR_ENTP2_BIT (UL(1) << SCR_ENTP2_SHIFT)
diff --git a/include/arch/aarch64/arch_features.h b/include/arch/aarch64/arch_features.h
index 79a61b5..0af5b74 100644
--- a/include/arch/aarch64/arch_features.h
+++ b/include/arch/aarch64/arch_features.h
@@ -129,6 +129,13 @@
ID_AA64MMFR1_EL1_HCX_MASK) == ID_AA64MMFR1_EL1_HCX_SUPPORTED);
}
+static inline bool is_feat_rng_trap_present(void)
+{
+ return (((read_id_aa64pfr1_el1() >> ID_AA64PFR1_EL1_RNDR_TRAP_SHIFT) &
+ ID_AA64PFR1_EL1_RNDR_TRAP_MASK)
+ == ID_AA64PFR1_EL1_RNG_TRAP_SUPPORTED);
+}
+
static inline unsigned int get_armv9_2_feat_rme_support(void)
{
/*
diff --git a/include/arch/aarch64/smccc_helpers.h b/include/arch/aarch64/smccc_helpers.h
index fac6fd9..920f294 100644
--- a/include/arch/aarch64/smccc_helpers.h
+++ b/include/arch/aarch64/smccc_helpers.h
@@ -9,12 +9,26 @@
#include <lib/smccc.h>
+/* Definitions to help the assembler access the SMC/ERET args structure */
+#define SMC_ARGS_SIZE 0x40
+#define SMC_ARG0 0x0
+#define SMC_ARG1 0x8
+#define SMC_ARG2 0x10
+#define SMC_ARG3 0x18
+#define SMC_ARG4 0x20
+#define SMC_ARG5 0x28
+#define SMC_ARG6 0x30
+#define SMC_ARG7 0x38
+#define SMC_ARGS_END 0x40
+
#ifndef __ASSEMBLER__
#include <stdbool.h>
#include <context.h>
+#include <platform_def.h> /* For CACHE_WRITEBACK_GRANULE */
+
/* Convenience macros to return from SMC handler */
#define SMC_RET0(_h) { \
return (uint64_t) (_h); \
@@ -82,6 +96,49 @@
_x4 = read_ctx_reg(regs, CTX_GPREG_X4); \
} while (false)
+typedef struct {
+ uint64_t _regs[SMC_ARGS_END >> 3];
+} __aligned(CACHE_WRITEBACK_GRANULE) smc_args_t;
+
+/*
+ * Ensure that the assembler's view of the size of the tsp_args is the
+ * same as the compilers.
+ */
+CASSERT(sizeof(smc_args_t) == SMC_ARGS_SIZE, assert_sp_args_size_mismatch);
+
+static inline smc_args_t smc_helper(uint32_t func, uint64_t arg0,
+ uint64_t arg1, uint64_t arg2,
+ uint64_t arg3, uint64_t arg4,
+ uint64_t arg5, uint64_t arg6)
+{
+ smc_args_t ret_args = {0};
+
+ register uint64_t r0 __asm__("x0") = func;
+ register uint64_t r1 __asm__("x1") = arg0;
+ register uint64_t r2 __asm__("x2") = arg1;
+ register uint64_t r3 __asm__("x3") = arg2;
+ register uint64_t r4 __asm__("x4") = arg3;
+ register uint64_t r5 __asm__("x5") = arg4;
+ register uint64_t r6 __asm__("x6") = arg5;
+ register uint64_t r7 __asm__("x7") = arg6;
+
+ /* Output registers, also used as inputs ('+' constraint). */
+ __asm__ volatile("smc #0"
+ : "+r"(r0), "+r"(r1), "+r"(r2), "+r"(r3), "+r"(r4),
+ "+r"(r5), "+r"(r6), "+r"(r7));
+
+ ret_args._regs[0] = r0;
+ ret_args._regs[1] = r1;
+ ret_args._regs[2] = r2;
+ ret_args._regs[3] = r3;
+ ret_args._regs[4] = r4;
+ ret_args._regs[5] = r5;
+ ret_args._regs[6] = r6;
+ ret_args._regs[7] = r7;
+
+ return ret_args;
+}
+
#endif /*__ASSEMBLER__*/
#endif /* SMCCC_HELPERS_H */
diff --git a/include/bl31/interrupt_mgmt.h b/include/bl31/interrupt_mgmt.h
index 935bf77..694f1f0 100644
--- a/include/bl31/interrupt_mgmt.h
+++ b/include/bl31/interrupt_mgmt.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -107,15 +107,23 @@
static inline int32_t validate_el3_interrupt_rm(uint32_t x)
{
-#if EL3_EXCEPTION_HANDLING
+#if defined (EL3_EXCEPTION_HANDLING) && !(defined(SPD_spmd) && (SPMD_SPM_AT_SEL2 == 1))
/*
* With EL3 exception handling, EL3 interrupts are always routed to EL3
- * from both Secure and Non-secure, and therefore INTR_EL3_VALID_RM1 is
- * the only valid routing model.
+ * from both Secure and Non-secure, when the SPMC does not live in S-EL2.
+ * Therefore INTR_EL3_VALID_RM1 is the only valid routing model.
*/
if (x == INTR_EL3_VALID_RM1)
return 0;
#else
+ /*
+ * When EL3_EXCEPTION_HANDLING is not defined both routing modes are
+ * valid. This is the most common case. The exception to this rule is
+ * when EL3_EXCEPTION_HANDLING is defined but also when the SPMC lives
+ * at S-EL2. In this case, Group0 Interrupts are trapped to the SPMC
+ * when running in S-EL0 and S-EL1. The SPMC may handle the interrupt
+ * itself, delegate it to an SP or forward to EL3 for handling.
+ */
if ((x == INTR_EL3_VALID_RM0) || (x == INTR_EL3_VALID_RM1))
return 0;
#endif
diff --git a/include/common/bl_common.h b/include/common/bl_common.h
index 3a06cfb..539280e 100644
--- a/include/common/bl_common.h
+++ b/include/common/bl_common.h
@@ -178,6 +178,7 @@
extern const char build_message[];
extern const char version_string[];
+const char *get_version(void);
void print_entry_point_info(const entry_point_info_t *ep_info);
uintptr_t page_align(uintptr_t value, unsigned dir);
diff --git a/include/drivers/mmc.h b/include/drivers/mmc.h
index c154ea5..e973248 100644
--- a/include/drivers/mmc.h
+++ b/include/drivers/mmc.h
@@ -111,6 +111,7 @@
#define MMC_STATE_SLP 10
#define MMC_FLAG_CMD23 (U(1) << 0)
+#define MMC_FLAG_SD_CMD6 (U(1) << 1)
#define CMD8_CHECK_PATTERN U(0xAA)
#define VHS_2_7_3_6_V BIT(8)
@@ -118,6 +119,10 @@
#define SD_SCR_BUS_WIDTH_1 BIT(8)
#define SD_SCR_BUS_WIDTH_4 BIT(10)
+#define SD_SWITCH_FUNC_CHECK 0U
+#define SD_SWITCH_FUNC_SWITCH BIT(31)
+#define SD_SWITCH_ALL_GROUPS_MASK GENMASK(23, 0)
+
struct mmc_cmd {
unsigned int cmd_idx;
unsigned int cmd_arg;
@@ -217,6 +222,27 @@
unsigned int csd_structure: 2;
};
+struct sd_switch_status {
+ unsigned short max_current;
+ unsigned short support_g6;
+ unsigned short support_g5;
+ unsigned short support_g4;
+ unsigned short support_g3;
+ unsigned short support_g2;
+ unsigned short support_g1;
+ unsigned char sel_g6_g5;
+ unsigned char sel_g4_g3;
+ unsigned char sel_g2_g1;
+ unsigned char data_struct_ver;
+ unsigned short busy_g6;
+ unsigned short busy_g5;
+ unsigned short busy_g4;
+ unsigned short busy_g3;
+ unsigned short busy_g2;
+ unsigned short busy_g1;
+ unsigned short reserved[17];
+};
+
enum mmc_device_type {
MMC_IS_EMMC,
MMC_IS_SD,
diff --git a/include/drivers/nand.h b/include/drivers/nand.h
index 1b78ad4..5e5607c 100644
--- a/include/drivers/nand.h
+++ b/include/drivers/nand.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2019-2021, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2019-2022, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -33,6 +33,8 @@
uintptr_t buffer);
};
+void plat_get_scratch_buffer(void **buffer_addr, size_t *buf_size);
+
/*
* Read bytes from NAND device
*
diff --git a/include/lib/cpus/aarch64/cortex_a510.h b/include/lib/cpus/aarch64/cortex_a510.h
index 2b8db14..af38734 100644
--- a/include/lib/cpus/aarch64/cortex_a510.h
+++ b/include/lib/cpus/aarch64/cortex_a510.h
@@ -17,6 +17,8 @@
#define CORTEX_A510_CPUECTLR_EL1_READPREFERUNIQUE_DISABLE U(1)
#define CORTEX_A510_CPUECTLR_EL1_RSCTL_SHIFT U(23)
#define CORTEX_A510_CPUECTLR_EL1_NTCTL_SHIFT U(46)
+#define CORTEX_A510_CPUECTLR_EL1_ATOM_EXECALLINSTRNEAR U(2)
+#define CORTEX_A510_CPUECTLR_EL1_ATOM U(38)
/*******************************************************************************
* CPU Power Control register specific definitions
@@ -33,5 +35,6 @@
* Auxiliary control register specific definitions
******************************************************************************/
#define CORTEX_A510_CPUACTLR_EL1 S3_0_C15_C1_0
+#define CORTEX_A510_CPUACTLR_EL1_BIT_17 (ULL(1) << 17)
-#endif /* CORTEX_A510_H */
+#endif /* CORTEX_A510_H */
\ No newline at end of file
diff --git a/include/lib/cpus/aarch64/cortex_a78c.h b/include/lib/cpus/aarch64/cortex_a78c.h
index 54c95ad..7f7b9a5 100644
--- a/include/lib/cpus/aarch64/cortex_a78c.h
+++ b/include/lib/cpus/aarch64/cortex_a78c.h
@@ -14,11 +14,17 @@
#define CORTEX_A78C_BHB_LOOP_COUNT U(32)
/*******************************************************************************
+ * CPU Auxiliary Control register 2 specific definitions.
+ * ****************************************************************************/
+#define CORTEX_A78C_CPUACTLR2_EL1 S3_0_C15_C1_1
+#define CORTEX_A78C_CPUACTLR2_EL1_BIT_40 (ULL(1) << 40)
+
+/*******************************************************************************
* CPU Extended Control register specific definitions.
******************************************************************************/
#define CORTEX_A78C_CPUECTLR_EL1 S3_0_C15_C1_4
-#define CORTEX_A78C_CPUECTLR_EL1_BIT6 (ULL(1) << 6)
-#define CORTEX_A78C_CPUECTLR_EL1_BIT7 (ULL(1) << 7)
+#define CORTEX_A78C_CPUECTLR_EL1_BIT_6 (ULL(1) << 6)
+#define CORTEX_A78C_CPUECTLR_EL1_BIT_7 (ULL(1) << 7)
/*******************************************************************************
* CPU Power Control register specific definitions
diff --git a/include/lib/cpus/aarch64/neoverse_n2.h b/include/lib/cpus/aarch64/neoverse_n2.h
index 5d41a13..3ff817c 100644
--- a/include/lib/cpus/aarch64/neoverse_n2.h
+++ b/include/lib/cpus/aarch64/neoverse_n2.h
@@ -37,6 +37,7 @@
* CPU Auxiliary Control register 2 specific definitions.
******************************************************************************/
#define NEOVERSE_N2_CPUACTLR2_EL1 S3_0_C15_C1_1
+#define NEOVERSE_N2_CPUACTLR2_EL1_BIT_0 (ULL(1) << 0)
#define NEOVERSE_N2_CPUACTLR2_EL1_BIT_2 (ULL(1) << 2)
#define NEOVERSE_N2_CPUACTLR2_EL1_BIT_40 (ULL(1) << 40)
diff --git a/include/lib/cpus/aarch64/neoverse_v1.h b/include/lib/cpus/aarch64/neoverse_v1.h
index 181be1d..9c7e967 100644
--- a/include/lib/cpus/aarch64/neoverse_v1.h
+++ b/include/lib/cpus/aarch64/neoverse_v1.h
@@ -16,6 +16,10 @@
* CPU Extended Control register specific definitions.
******************************************************************************/
#define NEOVERSE_V1_CPUECTLR_EL1 S3_0_C15_C1_4
+#define NEOVERSE_V1_CPUPSELR_EL3 S3_6_C15_C8_0
+#define NEOVERSE_V1_CPUPOR_EL3 S3_6_C15_C8_2
+#define NEOVERSE_V1_CPUPMR_EL3 S3_6_C15_C8_3
+#define NEOVERSE_V1_CPUPCR_EL3 S3_6_C15_C8_1
#define NEOVERSE_V1_CPUECTLR_EL1_BIT_8 (ULL(1) << 8)
#define NEOVERSE_V1_CPUECTLR_EL1_BIT_53 (ULL(1) << 53)
#define NEOVERSE_V1_CPUECTLR_EL1_PF_MODE_CNSRV ULL(3)
diff --git a/include/lib/libc/cdefs.h b/include/lib/libc/cdefs.h
index 0d00722..423f0db 100644
--- a/include/lib/libc/cdefs.h
+++ b/include/lib/libc/cdefs.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -12,6 +12,7 @@
#define __packed __attribute__((__packed__))
#define __used __attribute__((__used__))
#define __unused __attribute__((__unused__))
+#define __maybe_unused __attribute__((__unused__))
#define __aligned(x) __attribute__((__aligned__(x)))
#define __section(x) __attribute__((__section__(x)))
#if RECLAIM_INIT_CODE
diff --git a/include/lib/psa/psa_manifest/sid.h b/include/lib/psa/psa_manifest/sid.h
index 947e58f..580a4cf 100644
--- a/include/lib/psa/psa_manifest/sid.h
+++ b/include/lib/psa/psa_manifest/sid.h
@@ -9,13 +9,9 @@
#define PSA_MANIFEST_SID_H
/******** PSA_SP_INITIAL_ATTESTATION ********/
-#define RSS_ATTESTATION_SERVICE_SID (0x00000020U)
-#define RSS_ATTESTATION_SERVICE_VERSION (1U)
#define RSS_ATTESTATION_SERVICE_HANDLE (0x40000103U)
/******** PSA_SP_MEASURED_BOOT ********/
-#define RSS_MEASURED_BOOT_SID (0x000000E0U)
-#define RSS_MEASURED_BOOT_VERSION (1U)
-#define RSS_MEASURED_BOOT_HANDLE (0x40000104U)
+#define RSS_MEASURED_BOOT_HANDLE (0x40000110U)
#endif /* PSA_MANIFEST_SID_H */
diff --git a/lib/cpus/aarch64/cortex_a510.S b/lib/cpus/aarch64/cortex_a510.S
index f444077..81a4a78 100644
--- a/lib/cpus/aarch64/cortex_a510.S
+++ b/lib/cpus/aarch64/cortex_a510.S
@@ -265,6 +265,72 @@
endfunc check_errata_2172148
/* ----------------------------------------------------
+ * Errata Workaround for Cortex-A510 Errata #2347730.
+ * This applies to revisions r0p0 - r0p3, r1p0, r1p1.
+ * It is fixed in r1p2.
+ * Inputs:
+ * x0: variant[4:7] and revision[0:3] of current cpu.
+ * Shall clobber: x0-x1, x17
+ * ----------------------------------------------------
+ */
+func errata_cortex_a510_2347730_wa
+ mov x17, x30
+ bl check_errata_2347730
+ cbz x0, 1f
+
+ /*
+ * Set CPUACTLR_EL1[17] to 1'b1, which disables
+ * specific microarchitectural clock gating
+ * behaviour.
+ */
+ mrs x1, CORTEX_A510_CPUACTLR_EL1
+ orr x1, x1, CORTEX_A510_CPUACTLR_EL1_BIT_17
+ msr CORTEX_A510_CPUACTLR_EL1, x1
+1:
+ ret x17
+endfunc errata_cortex_a510_2347730_wa
+
+func check_errata_2347730
+ /* Applies to revisions r1p1 and lower. */
+ mov x1, #0x11
+ b cpu_rev_var_ls
+endfunc check_errata_2347730
+
+ /*---------------------------------------------------
+ * Errata Workaround for Cortex-A510 Errata #2371937.
+ * This applies to revisions r1p1 and lower, and is
+ * fixed in r1p2.
+ * Inputs:
+ * x0: variant[4:7] and revision[0:3] of current cpu.
+ * Shall clobber: x0, x1, x17
+ *---------------------------------------------------
+ */
+func errata_cortex_a510_2371937_wa
+ mov x17, x30
+ bl check_errata_2371937
+ cbz x0, 1f
+
+ /*
+ * Cacheable atomic operations can be forced
+ * to be executed near by setting
+ * IMP_CPUECTLR_EL1.ATOM=0b010. ATOM is found
+ * in [40:38] of CPUECTLR_EL1.
+ */
+ mrs x0, CORTEX_A510_CPUECTLR_EL1
+ mov x1, CORTEX_A510_CPUECTLR_EL1_ATOM_EXECALLINSTRNEAR
+ bfi x0, x1, CORTEX_A510_CPUECTLR_EL1_ATOM, #3
+ msr CORTEX_A510_CPUECTLR_EL1, x0
+1:
+ ret x17
+endfunc errata_cortex_a510_2371937_wa
+
+func check_errata_2371937
+ /* Applies to r1p1 and lower */
+ mov x1, #0x11
+ b cpu_rev_var_ls
+endfunc check_errata_2371937
+
+ /* ----------------------------------------------------
* HW will do the cache maintenance while powering down
* ----------------------------------------------------
*/
@@ -301,6 +367,8 @@
report_errata ERRATA_A510_2250311, cortex_a510, 2250311
report_errata ERRATA_A510_2218950, cortex_a510, 2218950
report_errata ERRATA_A510_2172148, cortex_a510, 2172148
+ report_errata ERRATA_A510_2347730, cortex_a510, 2347730
+ report_errata ERRATA_A510_2371937, cortex_a510, 2371937
report_errata ERRATA_DSU_2313941, cortex_a510, dsu_2313941
ldp x8, x30, [sp], #16
@@ -352,11 +420,21 @@
bl errata_cortex_a510_2218950_wa
#endif
+#if ERRATA_A510_2371937
+ mov x0, x18
+ bl errata_cortex_a510_2371937_wa
+#endif
+
#if ERRATA_A510_2172148
mov x0, x18
bl errata_cortex_a510_2172148_wa
#endif
+#if ERRATA_A510_2347730
+ mov x0, x18
+ bl errata_cortex_a510_2347730_wa
+#endif
+
isb
ret x19
endfunc cortex_a510_reset_func
diff --git a/lib/cpus/aarch64/cortex_a710.S b/lib/cpus/aarch64/cortex_a710.S
index 8d02e7b..0b06169 100644
--- a/lib/cpus/aarch64/cortex_a710.S
+++ b/lib/cpus/aarch64/cortex_a710.S
@@ -280,6 +280,37 @@
b cpu_rev_var_ls
endfunc check_errata_2136059
+/* ----------------------------------------------------------------
+ * Errata workaround for Cortex-A710 Erratum 2147715.
+ * This applies to revision r2p0, and is fixed in r2p1.
+ * Inputs:
+ * x0: variant[4:7] and revision[0:3] of current cpu.
+ * Shall clobber: x0, x1, x17
+ * ----------------------------------------------------------------
+ */
+func errata_a710_2147715_wa
+ mov x17, x30
+ bl check_errata_2147715
+ cbz x0, 1f
+
+ /* Apply workaround; set CPUACTLR_EL1[22]
+ * to 1, which will cause the CFP instruction
+ * to invalidate all branch predictor resources
+ * regardless of context.
+ */
+ mrs x1, CORTEX_A710_CPUACTLR_EL1
+ orr x1, x1, CORTEX_A710_CPUACTLR_EL1_BIT_22
+ msr CORTEX_A710_CPUACTLR_EL1, x1
+1:
+ ret x17
+endfunc errata_a710_2147715_wa
+
+func check_errata_2147715
+ mov x1, #0x20
+ mov x2, #0x20
+ b cpu_rev_var_range
+endfunc check_errata_2147715
+
/* ---------------------------------------------------------------
* Errata Workaround for Cortex-A710 Erratum 2282622.
* This applies to revision r0p0, r1p0 and r2p0.
@@ -438,6 +469,7 @@
report_errata ERRATA_A710_2136059, cortex_a710, 2136059
report_errata ERRATA_A710_2282622, cortex_a710, 2282622
report_errata ERRATA_A710_2008768, cortex_a710, 2008768
+ report_errata ERRATA_A710_2147715, cortex_a710, 2147715
report_errata ERRATA_A710_2371105, cortex_a710, 2371105
report_errata WORKAROUND_CVE_2022_23960, cortex_a710, cve_2022_23960
report_errata ERRATA_DSU_2313941, cortex_a710, dsu_2313941
@@ -500,6 +532,11 @@
bl errata_a710_2136059_wa
#endif
+#if ERRATA_A710_2147715
+ mov x0, x18
+ bl errata_a710_2147715_wa
+#endif
+
#if ERRATA_A710_2282622
mov x0, x18
bl errata_a710_2282622_wa
diff --git a/lib/cpus/aarch64/cortex_makalu.S b/lib/cpus/aarch64/cortex_a715.S
similarity index 100%
rename from lib/cpus/aarch64/cortex_makalu.S
rename to lib/cpus/aarch64/cortex_a715.S
diff --git a/lib/cpus/aarch64/cortex_a78c.S b/lib/cpus/aarch64/cortex_a78c.S
index fc002e9..4f0bb49 100644
--- a/lib/cpus/aarch64/cortex_a78c.S
+++ b/lib/cpus/aarch64/cortex_a78c.S
@@ -17,6 +17,36 @@
#error "cortex_a78c must be compiled with HW_ASSISTED_COHERENCY enabled"
#endif
+/* --------------------------------------------------
+ * Errata Workaround for Cortex A78C Erratum 2395411.
+ * This applies to revision r0p1 and r0p2 of the A78C
+ * and is currently open. It is a Cat B erratum.
+ * Inputs:
+ * x0: variant[4:7] and revision[0:3] of current cpu.
+ * Shall clobber: x0-x4, x17
+ * --------------------------------------------------
+ */
+func errata_a78c_2395411_wa
+ /* Check revision. */
+ mov x17, x30
+ bl check_errata_2395411
+ cbz x0, 1f
+
+ /* Set CPUACTRL2_EL1[40] to 1. */
+ mrs x1, CORTEX_A78C_CPUACTLR2_EL1
+ orr x1, x1, #CORTEX_A78C_CPUACTLR2_EL1_BIT_40
+ msr CORTEX_A78C_CPUACTLR2_EL1, x1
+1:
+ ret x17
+endfunc errata_a78c_2395411_wa
+
+func check_errata_2395411
+ /* Applies to r0p1 and r0p2 */
+ mov x1, #0x01
+ mov x2, #0x02
+ b cpu_rev_var_range
+endfunc check_errata_2395411
+
#if WORKAROUND_CVE_2022_23960
wa_cve_2022_23960_bhb_vector_table CORTEX_A78C_BHB_LOOP_COUNT, cortex_a78c
#endif /* WORKAROUND_CVE_2022_23960 */
@@ -43,8 +73,8 @@
* --------------------------------------------------------
*/
mrs x0, CORTEX_A78C_CPUECTLR_EL1
- orr x0, x0, #CORTEX_A78C_CPUECTLR_EL1_BIT6
- orr x0, x0, #CORTEX_A78C_CPUECTLR_EL1_BIT7
+ orr x0, x0, #CORTEX_A78C_CPUECTLR_EL1_BIT_6
+ orr x0, x0, #CORTEX_A78C_CPUECTLR_EL1_BIT_7
msr CORTEX_A78C_CPUECTLR_EL1, x0
isb
1:
@@ -121,6 +151,11 @@
bl errata_a78c_2242638_wa
#endif
+#if ERRATA_A78C_2395411
+ mov x0, x18
+ bl errata_a78c_2395411_wa
+#endif
+
#if IMAGE_BL31 && WORKAROUND_CVE_2022_23960
/*
* The Cortex-A78c generic vectors are overridden to apply errata
@@ -166,6 +201,7 @@
*/
report_errata ERRATA_A78C_2132064, cortex_a78c, 2132064
report_errata ERRATA_A78C_2242638, cortex_a78c, 2242638
+ report_errata ERRATA_A78C_2395411, cortex_a78c, 2395411
report_errata WORKAROUND_CVE_2022_23960, cortex_a78c, cve_2022_23960
ldp x8, x30, [sp], #16
diff --git a/lib/cpus/aarch64/cortex_makalu_elp_arm.S b/lib/cpus/aarch64/cortex_x3.S
similarity index 100%
rename from lib/cpus/aarch64/cortex_makalu_elp_arm.S
rename to lib/cpus/aarch64/cortex_x3.S
diff --git a/lib/cpus/aarch64/neoverse_n2.S b/lib/cpus/aarch64/neoverse_n2.S
index fae3be2..a807b63 100644
--- a/lib/cpus/aarch64/neoverse_n2.S
+++ b/lib/cpus/aarch64/neoverse_n2.S
@@ -338,6 +338,38 @@
b cpu_rev_var_ls
endfunc check_errata_2280757
+
+/* --------------------------------------------------
+ * Errata Workaround for Neoverse N2 Erratum 2376738.
+ * This applies to revision r0p0 of Neoverse N2,
+ * fixed in r0p1.
+ * Inputs:
+ * x0: variant[4:7] and revision[0:3] of current CPU.
+ * Shall clobber: x0-x1, x17
+ * --------------------------------------------------
+ */
+func errata_n2_2376738_wa
+ mov x17, x30
+ bl check_errata_2376738
+ cbz x0, 1f
+
+ /* Set CPUACTLR2_EL1[0] to 1 to force PLDW/PFRM
+ * ST to behave like PLD/PFRM LD and not cause
+ * invalidations to other PE caches.
+ */
+ mrs x1, NEOVERSE_N2_CPUACTLR2_EL1
+ orr x1, x1, NEOVERSE_N2_CPUACTLR2_EL1_BIT_0
+ msr NEOVERSE_N2_CPUACTLR2_EL1, x1
+1:
+ ret x17
+endfunc errata_n2_2376738_wa
+
+func check_errata_2376738
+ /* Applies to r0p0, fixed in r0p1 */
+ mov x1, 0x00
+ b cpu_rev_var_ls
+endfunc check_errata_2376738
+
/* --------------------------------------------------
* Errata Workaround for Neoverse N2 Erratum 2388450.
* This applies to revision r0p0 of Neoverse N2,
@@ -447,6 +479,11 @@
bl errata_n2_2280757_wa
#endif
+#if ERRATA_N2_2376738
+ mov x0, x18
+ bl errata_n2_2376738_wa
+#endif
+
#if ERRATA_N2_2388450
mov x0, x18
bl errata_n2_2388450_wa
@@ -531,6 +568,7 @@
report_errata ERRATA_N2_2138958, neoverse_n2, 2138958
report_errata ERRATA_N2_2242400, neoverse_n2, 2242400
report_errata ERRATA_N2_2280757, neoverse_n2, 2280757
+ report_errata ERRATA_N2_2376738, neoverse_n2, 2376738
report_errata ERRATA_N2_2388450, neoverse_n2, 2388450
report_errata WORKAROUND_CVE_2022_23960, neoverse_n2, cve_2022_23960
report_errata ERRATA_DSU_2313941, neoverse_n2, dsu_2313941
diff --git a/lib/cpus/aarch64/neoverse_v1.S b/lib/cpus/aarch64/neoverse_v1.S
index 378cb92..109b725 100644
--- a/lib/cpus/aarch64/neoverse_v1.S
+++ b/lib/cpus/aarch64/neoverse_v1.S
@@ -27,6 +27,82 @@
#endif /* WORKAROUND_CVE_2022_23960 */
/* --------------------------------------------------
+ * Errata Workaround for Neoverse V1 Errata #1618635.
+ * This applies to revision r0p0 and is fixed in
+ * r1p0.
+ * x0: variant[4:7] and revision[0:3] of current cpu.
+ * Shall clobber: x0, x17
+ * --------------------------------------------------
+ */
+func errata_neoverse_v1_1618635_wa
+ /* Check workaround compatibility. */
+ mov x17, x30
+ bl check_errata_1618635
+ cbz x0, 1f
+
+ /* Inserts a DMB SY before and after MRS PAR_EL1 */
+ ldr x0, =0x0
+ msr NEOVERSE_V1_CPUPSELR_EL3, x0
+ ldr x0, = 0xEE070F14
+ msr NEOVERSE_V1_CPUPOR_EL3, x0
+ ldr x0, = 0xFFFF0FFF
+ msr NEOVERSE_V1_CPUPMR_EL3, x0
+ ldr x0, =0x4005027FF
+ msr NEOVERSE_V1_CPUPCR_EL3, x0
+
+ /* Inserts a DMB SY before STREX imm offset */
+ ldr x0, =0x1
+ msr NEOVERSE_V1_CPUPSELR_EL3, x0
+ ldr x0, =0x00e8400000
+ msr NEOVERSE_V1_CPUPOR_EL3, x0
+ ldr x0, =0x00fff00000
+ msr NEOVERSE_V1_CPUPMR_EL3, x0
+ ldr x0, = 0x4001027FF
+ msr NEOVERSE_V1_CPUPCR_EL3, x0
+
+ /* Inserts a DMB SY before STREX[BHD}/STLEX* */
+ ldr x0, =0x2
+ msr NEOVERSE_V1_CPUPSELR_EL3, x0
+ ldr x0, =0x00e8c00040
+ msr NEOVERSE_V1_CPUPOR_EL3, x0
+ ldr x0, =0x00fff00040
+ msr NEOVERSE_V1_CPUPMR_EL3, x0
+ ldr x0, = 0x4001027FF
+ msr NEOVERSE_V1_CPUPCR_EL3, x0
+
+ /* Inserts a DMB SY after STREX imm offset */
+ ldr x0, =0x3
+ msr NEOVERSE_V1_CPUPSELR_EL3, x0
+ ldr x0, =0x00e8400000
+ msr NEOVERSE_V1_CPUPOR_EL3, x0
+ ldr x0, =0x00fff00000
+ msr NEOVERSE_V1_CPUPMR_EL3, x0
+ ldr x0, = 0x4004027FF
+ msr NEOVERSE_V1_CPUPCR_EL3, x0
+
+ /* Inserts a DMB SY after STREX[BHD}/STLEX* */
+ ldr x0, =0x4
+ msr NEOVERSE_V1_CPUPSELR_EL3, x0
+ ldr x0, =0x00e8c00040
+ msr NEOVERSE_V1_CPUPOR_EL3, x0
+ ldr x0, =0x00fff00040
+ msr NEOVERSE_V1_CPUPMR_EL3, x0
+ ldr x0, = 0x4004027FF
+ msr NEOVERSE_V1_CPUPCR_EL3, x0
+
+ /* Synchronize to enable patches */
+ isb
+1:
+ ret x17
+endfunc errata_neoverse_v1_1618635_wa
+
+func check_errata_1618635
+ /* Applies to revision r0p0. */
+ mov x1, #0x00
+ b cpu_rev_var_ls
+endfunc check_errata_1618635
+
+ /* --------------------------------------------------
* Errata Workaround for Neoverse V1 Errata #1774420.
* This applies to revisions r0p0 and r1p0, fixed in r1p1.
* x0: variant[4:7] and revision[0:3] of current cpu.
@@ -425,6 +501,7 @@
* Report all errata. The revision-variant information is passed to
* checking functions of each errata.
*/
+ report_errata ERRATA_V1_1618635, neoverse_v1, 1618635
report_errata ERRATA_V1_1774420, neoverse_v1, 1774420
report_errata ERRATA_V1_1791573, neoverse_v1, 1791573
report_errata ERRATA_V1_1852267, neoverse_v1, 1852267
@@ -450,6 +527,11 @@
msr SSBS, xzr
isb
+#if ERRATA_V1_1618635
+ mov x0, x18
+ bl errata_neoverse_v1_1618635_wa
+#endif
+
#if ERRATA_V1_1774420
mov x0, x18
bl errata_neoverse_v1_1774420_wa
diff --git a/lib/cpus/cpu-ops.mk b/lib/cpus/cpu-ops.mk
index b114824..36832cd 100644
--- a/lib/cpus/cpu-ops.mk
+++ b/lib/cpus/cpu-ops.mk
@@ -369,6 +369,10 @@
# to revisions r0p1 and r0p2 of the A78C cpu. It is still open.
ERRATA_A78C_2242638 ?=0
+# Flag to apply erratum 2395411 workaround during reset. This erratum applies
+# to revisions r0p1 and r0p2 of the A78C cpu. It is still open.
+ERRATA_A78C_2395411 ?=0
+
# Flag to apply erratum 1821534 workaround during reset. This erratum applies
# to revisions r0p0 - r1p0 of the X1 cpu and fixed in r1p1.
ERRATA_X1_1821534 ?=0
@@ -442,6 +446,10 @@
# to revisions r0p0 of the Neoverse-N2 cpu, it is still open.
ERRATA_N2_2002655 ?=0
+# Flag to apply erratum 1618635 workaround during reset. This erratum applies
+# to revision r0p0 of the Neoverse V1 cpu and was fixed in the revision r1p0.
+ERRATA_V1_1618635 ?=0
+
# Flag to apply erratum 1774420 workaround during reset. This erratum applies
# to revisions r0p0 and r1p0 of the Neoverse V1 core, and was fixed in r1p1.
ERRATA_V1_1774420 ?=0
@@ -520,6 +528,10 @@
# to revision r0p0, r1p0 and r2p0 of the Cortex-A710 cpu and is fixed in r2p1.
ERRATA_A710_2136059 ?=0
+# Flag to apply erratum 2147715 workaround during reset. This erratum applies
+# to revision r2p0 of the Cortex-A710 CPU and is fixed in revision r2p1.
+ERRATA_A710_2147715 ?=0
+
# Flag to apply erratum 2282622 workaround during reset. This erratum applies
# to revision r0p0, r1p0 and r2p0 of the Cortex-A710 cpu and is fixed in r2p1.
ERRATA_A710_2282622 ?=0
@@ -568,6 +580,10 @@
# to revision r0p0 of the Neoverse N2 cpu and is still open.
ERRATA_N2_2280757 ?=0
+# Flag to apply erratum 2376738 workaround during reset. This erratum applies
+# to revision r0p0 of the Neoverse N2 cpu, it is fixed in r0p1.
+ERRATA_N2_2376738 ?=0
+
# Flag to apply erratum 2388450 workaround during reset. This erratum applies
# to revision r0p0 of the Neoverse N2 cpu, it is fixed in r0p1.
ERRATA_N2_2388450 ?=0
@@ -637,6 +653,15 @@
# to revisions r0p0, r0p1, r0p2, r0p3 and r1p0, and is fixed in r1p1.
ERRATA_A510_2172148 ?=0
+# Flag to apply erratum 2347730 workaround during reset. This erratum applies
+# to revisions r0p0, r0p1, r0p2, r0p3, r1p0 and r1p1 of the Cortex-A510 CPU,
+# and is fixed in r1p2.
+ERRATA_A510_2347730 ?=0
+
+# Flag to apply erratum 2371937 workaround during reset. This erratum applies
+# to revisions r0p0, r0p1, r0p2, r0p3, r1p0, and r1p1. It is fixed in r1p2.
+ERRATA_A510_2371937 ?=0
+
# Flag to apply DSU erratum 798953. This erratum applies to DSUs revision r0p0.
# Applying the workaround results in higher DSU power consumption on idle.
ERRATA_DSU_798953 ?=0
@@ -939,6 +964,10 @@
$(eval $(call assert_boolean,ERRATA_A78C_2242638))
$(eval $(call add_define,ERRATA_A78C_2242638))
+# Process ERRATA_A78C_2395411 flag
+$(eval $(call assert_boolean,ERRATA_A78C_2395411))
+$(eval $(call add_define,ERRATA_A78C_2395411))
+
# Process ERRATA_X1_1821534 flag
$(eval $(call assert_boolean,ERRATA_X1_1821534))
$(eval $(call add_define,ERRATA_X1_1821534))
@@ -1011,6 +1040,10 @@
$(eval $(call assert_boolean,ERRATA_N2_2002655))
$(eval $(call add_define,ERRATA_N2_2002655))
+# Process ERRATA_V1_1618635 flag
+$(eval $(call assert_boolean,ERRATA_V1_1618635))
+$(eval $(call add_define,ERRATA_V1_1618635))
+
# Process ERRATA_V1_1774420 flag
$(eval $(call assert_boolean,ERRATA_V1_1774420))
$(eval $(call add_define,ERRATA_V1_1774420))
@@ -1087,6 +1120,10 @@
$(eval $(call assert_boolean,ERRATA_A710_2136059))
$(eval $(call add_define,ERRATA_A710_2136059))
+# Process ERRATA_A710_2147715 flag
+$(eval $(call assert_boolean,ERRATA_A710_2147715))
+$(eval $(call add_define,ERRATA_A710_2147715))
+
# Process ERRATA_A710_2282622 flag
$(eval $(call assert_boolean,ERRATA_A710_2282622))
$(eval $(call add_define,ERRATA_A710_2282622))
@@ -1135,6 +1172,10 @@
$(eval $(call assert_boolean,ERRATA_N2_2280757))
$(eval $(call add_define,ERRATA_N2_2280757))
+# Process ERRATA_N2_2376738 flag
+$(eval $(call assert_boolean,ERRATA_N2_2376738))
+$(eval $(call add_define,ERRATA_N2_2376738))
+
# Process ERRATA_N2_2388450 flag
$(eval $(call assert_boolean,ERRATA_N2_2388450))
$(eval $(call add_define,ERRATA_N2_2388450))
@@ -1199,6 +1240,14 @@
$(eval $(call assert_boolean,ERRATA_A510_2172148))
$(eval $(call add_define,ERRATA_A510_2172148))
+# Process ERRATA_A510_2347730 flag
+$(eval $(call assert_boolean,ERRATA_A510_2347730))
+$(eval $(call add_define,ERRATA_A510_2347730))
+
+# Process ERRATA_A510_2371937 flag
+$(eval $(call assert_boolean,ERRATA_A510_2371937))
+$(eval $(call add_define,ERRATA_A510_2371937))
+
# Process ERRATA_DSU_798953 flag
$(eval $(call assert_boolean,ERRATA_DSU_798953))
$(eval $(call add_define,ERRATA_DSU_798953))
diff --git a/lib/el3_runtime/aarch64/context_mgmt.c b/lib/el3_runtime/aarch64/context_mgmt.c
index da610d0..68aacc1 100644
--- a/lib/el3_runtime/aarch64/context_mgmt.c
+++ b/lib/el3_runtime/aarch64/context_mgmt.c
@@ -299,6 +299,14 @@
scr_el3 |= SCR_HXEn_BIT;
#endif
+ /*
+ * If FEAT_RNG_TRAP is enabled, all reads of the RNDR and RNDRRS
+ * registers are trapped to EL3.
+ */
+#if ENABLE_FEAT_RNG_TRAP
+ scr_el3 |= SCR_TRNDR_BIT;
+#endif
+
#if RAS_TRAP_LOWER_EL_ERR_ACCESS
/*
* SCR_EL3.TERR: Trap Error record accesses. Accesses to the RAS ERR
diff --git a/make_helpers/build_macros.mk b/make_helpers/build_macros.mk
index a58caf5..abdd4d0 100644
--- a/make_helpers/build_macros.mk
+++ b/make_helpers/build_macros.mk
@@ -499,7 +499,8 @@
$(call MAKE_BUILD_STRINGS, $(BUILD_DIR)/build_message.o)
else
@echo 'const char build_message[] = "Built : "$(BUILD_MESSAGE_TIMESTAMP); \
- const char version_string[] = "${VERSION_STRING}";' | \
+ const char version_string[] = "${VERSION_STRING}"; \
+ const char version[] = "${VERSION}";' | \
$$(CC) $$(TF_CFLAGS) $$(CFLAGS) -xc -c - -o $(BUILD_DIR)/build_message.o
endif
ifneq ($(findstring armlink,$(notdir $(LD))),)
diff --git a/make_helpers/defaults.mk b/make_helpers/defaults.mk
index d957a4b..5e73120 100644
--- a/make_helpers/defaults.mk
+++ b/make_helpers/defaults.mk
@@ -160,6 +160,10 @@
# Flag to enable access to the Random Number Generator registers
ENABLE_FEAT_RNG := 0
+# Flag to enable support for EL3 trapping of reads of the RNDR and RNDRRS
+# registers, by setting SCR_EL3.TRNDR.
+ENABLE_FEAT_RNG_TRAP := 0
+
# Flag to enable Speculation Barrier Instruction
ENABLE_FEAT_SB := 0
diff --git a/make_helpers/windows.mk b/make_helpers/windows.mk
index 26ea88e..b6d6f0b 100644
--- a/make_helpers/windows.mk
+++ b/make_helpers/windows.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2016-2020, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2016-2022, Arm Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -81,8 +81,9 @@
# by defining the MAKE_BUILD_STRINGS macro.
BUILT_TIME_DATE_STRING = const char build_message[] = "Built : "${BUILD_MESSAGE_TIMESTAMP};
VERSION_STRING_MESSAGE = const char version_string[] = "${VERSION_STRING}";
+VERSION_MESSAGE = const char version[] = "${VERSION}";
define MAKE_BUILD_STRINGS
- @echo $$(BUILT_TIME_DATE_STRING) $$(VERSION_STRING_MESSAGE) | \
+ @echo $$(BUILT_TIME_DATE_STRING) $$(VERSION_STRING_MESSAGE) $$(VERSION_MESSAGE) | \
$$(CC) $$(TF_CFLAGS) $$(CFLAGS) -x c -c - -o $1
endef
diff --git a/plat/arm/board/arm_fpga/platform.mk b/plat/arm/board/arm_fpga/platform.mk
index 084532c..a14a0d8 100644
--- a/plat/arm/board/arm_fpga/platform.mk
+++ b/plat/arm/board/arm_fpga/platform.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2021, Arm Limited. All rights reserved.
+# Copyright (c) 2021-2022, Arm Limited. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -71,9 +71,9 @@
lib/cpus/aarch64/cortex_a65.S \
lib/cpus/aarch64/cortex_a65ae.S \
lib/cpus/aarch64/cortex_a510.S \
- lib/cpus/aarch64/cortex_a710.S \
- lib/cpus/aarch64/cortex_makalu.S \
- lib/cpus/aarch64/cortex_makalu_elp_arm.S \
+ lib/cpus/aarch64/cortex_a710.S \
+ lib/cpus/aarch64/cortex_a715.S \
+ lib/cpus/aarch64/cortex_x3.S \
lib/cpus/aarch64/cortex_a78c.S
# AArch64/AArch32 cores
diff --git a/plat/arm/board/fvp/fdts/fvp_tsp_sp_manifest.dts b/plat/arm/board/fvp/fdts/fvp_tsp_sp_manifest.dts
new file mode 100644
index 0000000..1587c72
--- /dev/null
+++ b/plat/arm/board/fvp/fdts/fvp_tsp_sp_manifest.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+/dts-v1/;
+
+#define AFF 00
+
+#include "fvp-defs.dtsi"
+#undef POST
+#define POST \
+ };
+
+#define S_EL0 (0x1)
+#define S_EL1 (0x2)
+
+/* For consumption by EL3 SPMC. */
+/ {
+ compatible = "arm,ffa-manifest-1.0";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ffa-version = <0x00010001>; /* 31:16 - Major, 15:0 - Minor */
+ id = <0x8001>;
+ uuid = <0x6b43b460 0x74a24b78 0xade24502 0x40682886>;
+ messaging-method = <0x3>; /* Direct Messaging Only */
+ exception-level = <S_EL1>;
+ execution-state = <0>;
+ execution-ctx-count = <8>;
+ gp-register-num = <0>;
+ /* Subscribe to CPU_OFF, CPU_SUSPEND and CPU_SUSPEND_RESUME PM Msgs */
+ power-management-messages = <0x7>;
+};
diff --git a/plat/arm/board/fvp/include/platform_def.h b/plat/arm/board/fvp/include/platform_def.h
index d0f8aa9..e1bf46d 100644
--- a/plat/arm/board/fvp/include/platform_def.h
+++ b/plat/arm/board/fvp/include/platform_def.h
@@ -249,7 +249,11 @@
#elif defined(IMAGE_BL31)
# define PLATFORM_STACK_SIZE UL(0x800)
#elif defined(IMAGE_BL32)
-# define PLATFORM_STACK_SIZE UL(0x440)
+# if SPMC_AT_EL3
+# define PLATFORM_STACK_SIZE UL(0x1000)
+# else
+# define PLATFORM_STACK_SIZE UL(0x440)
+# endif /* SPMC_AT_EL3 */
#elif defined(IMAGE_RMM)
# define PLATFORM_STACK_SIZE UL(0x440)
#endif
diff --git a/plat/arm/board/fvp/platform.mk b/plat/arm/board/fvp/platform.mk
index a7e27e8..2539712 100644
--- a/plat/arm/board/fvp/platform.mk
+++ b/plat/arm/board/fvp/platform.mk
@@ -135,9 +135,9 @@
lib/cpus/aarch64/neoverse_demeter.S \
lib/cpus/aarch64/cortex_a78_ae.S \
lib/cpus/aarch64/cortex_a510.S \
- lib/cpus/aarch64/cortex_a710.S \
- lib/cpus/aarch64/cortex_makalu.S \
- lib/cpus/aarch64/cortex_makalu_elp_arm.S \
+ lib/cpus/aarch64/cortex_a710.S \
+ lib/cpus/aarch64/cortex_a715.S \
+ lib/cpus/aarch64/cortex_x3.S \
lib/cpus/aarch64/cortex_a65.S \
lib/cpus/aarch64/cortex_a65ae.S \
lib/cpus/aarch64/cortex_a78c.S \
diff --git a/plat/arm/board/tc/platform.mk b/plat/arm/board/tc/platform.mk
index e6c1c7c..1a1bc56 100644
--- a/plat/arm/board/tc/platform.mk
+++ b/plat/arm/board/tc/platform.mk
@@ -73,8 +73,8 @@
# CPU libraries for TARGET_PLATFORM=1
ifeq (${TARGET_PLATFORM}, 1)
TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a510.S \
- lib/cpus/aarch64/cortex_makalu.S \
- lib/cpus/aarch64/cortex_makalu_elp_arm.S
+ lib/cpus/aarch64/cortex_a715.S \
+ lib/cpus/aarch64/cortex_x3.S
endif
# CPU libraries for TARGET_PLATFORM=2
diff --git a/plat/arm/common/aarch32/arm_bl2_mem_params_desc.c b/plat/arm/common/aarch32/arm_bl2_mem_params_desc.c
index 78360b0..18f1a37 100644
--- a/plat/arm/common/aarch32/arm_bl2_mem_params_desc.c
+++ b/plat/arm/common/aarch32/arm_bl2_mem_params_desc.c
@@ -20,71 +20,72 @@
static bl_mem_params_node_t bl2_mem_params_descs[] = {
#ifdef SCP_BL2_BASE
/* Fill SCP_BL2 related information if it exists */
- {
- .image_id = SCP_BL2_IMAGE_ID,
+ {
+ .image_id = SCP_BL2_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = SCP_BL2_BASE,
- .image_info.image_max_size = PLAT_CSS_MAX_SCP_BL2_SIZE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = SCP_BL2_BASE,
+ .image_info.image_max_size = PLAT_CSS_MAX_SCP_BL2_SIZE,
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
#endif /* SCP_BL2_BASE */
/* Fill BL32 related information */
- {
- .image_id = BL32_IMAGE_ID,
+ {
+ .image_id = BL32_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t,
- SECURE | EXECUTABLE | EP_FIRST_EXE),
- .ep_info.pc = BL32_BASE,
- .ep_info.spsr = SPSR_MODE32(MODE32_mon, SPSR_T_ARM,
- SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = BL32_BASE,
+ .ep_info.spsr = SPSR_MODE32(MODE32_mon, SPSR_T_ARM,
+ SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
- .image_info.image_base = BL32_BASE,
- .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
- .next_handoff_image_id = BL33_IMAGE_ID,
- },
+ .next_handoff_image_id = BL33_IMAGE_ID,
+ },
/* Fill HW_CONFIG related information if it exists */
- {
- .image_id = HW_CONFIG_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
- VERSION_2, entry_point_info_t, NON_SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ {
+ .image_id = HW_CONFIG_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t,
+ NON_SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
/* Fill BL33 related information */
- {
- .image_id = BL33_IMAGE_ID,
+ {
+ .image_id = BL33_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
#ifdef PRELOADED_BL33_BASE
- .ep_info.pc = PRELOADED_BL33_BASE,
+ .ep_info.pc = PRELOADED_BL33_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
#else
- .ep_info.pc = PLAT_ARM_NS_IMAGE_BASE,
+ .ep_info.pc = PLAT_ARM_NS_IMAGE_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = PLAT_ARM_NS_IMAGE_BASE,
- .image_info.image_max_size = ARM_DRAM1_BASE + ARM_DRAM1_SIZE
- - PLAT_ARM_NS_IMAGE_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = PLAT_ARM_NS_IMAGE_BASE,
+ .image_info.image_max_size = ARM_DRAM1_BASE + ARM_DRAM1_SIZE
+ - PLAT_ARM_NS_IMAGE_BASE,
#endif /* PRELOADED_BL33_BASE */
- .next_handoff_image_id = INVALID_IMAGE_ID,
- }
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ }
};
REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs)
diff --git a/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c b/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c
index 0666e57..3d7b361 100644
--- a/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c
+++ b/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c
@@ -20,203 +20,207 @@
static bl_mem_params_node_t bl2_mem_params_descs[] = {
#ifdef SCP_BL2_BASE
/* Fill SCP_BL2 related information if it exists */
- {
- .image_id = SCP_BL2_IMAGE_ID,
+ {
+ .image_id = SCP_BL2_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = SCP_BL2_BASE,
- .image_info.image_max_size = PLAT_CSS_MAX_SCP_BL2_SIZE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = SCP_BL2_BASE,
+ .image_info.image_max_size = PLAT_CSS_MAX_SCP_BL2_SIZE,
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
#endif /* SCP_BL2_BASE */
#ifdef EL3_PAYLOAD_BASE
/* Fill EL3 payload related information (BL31 is EL3 payload)*/
- {
- .image_id = BL31_IMAGE_ID,
+ {
+ .image_id = BL31_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t,
- SECURE | EXECUTABLE | EP_FIRST_EXE),
- .ep_info.pc = EL3_PAYLOAD_BASE,
- .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = EL3_PAYLOAD_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t,
- IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t,
+ IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
#else /* EL3_PAYLOAD_BASE */
/* Fill BL31 related information */
- {
- .image_id = BL31_IMAGE_ID,
+ {
+ .image_id = BL31_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t,
- SECURE | EXECUTABLE | EP_FIRST_EXE),
- .ep_info.pc = BL31_BASE,
- .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = BL31_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
#if DEBUG
- .ep_info.args.arg3 = ARM_BL31_PLAT_PARAM_VAL,
+ .ep_info.args.arg3 = ARM_BL31_PLAT_PARAM_VAL,
#endif
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
- .image_info.image_base = BL31_BASE,
- .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+ .image_info.image_base = BL31_BASE,
+ .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
# if defined(BL32_BASE)
- .next_handoff_image_id = BL32_IMAGE_ID,
+ .next_handoff_image_id = BL32_IMAGE_ID,
# elif ENABLE_RME
- .next_handoff_image_id = RMM_IMAGE_ID,
+ .next_handoff_image_id = RMM_IMAGE_ID,
# else
- .next_handoff_image_id = BL33_IMAGE_ID,
+ .next_handoff_image_id = BL33_IMAGE_ID,
# endif
- },
+ },
/* Fill HW_CONFIG related information */
- {
- .image_id = HW_CONFIG_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
- VERSION_2, entry_point_info_t, NON_SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ {
+ .image_id = HW_CONFIG_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t,
+ NON_SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
/* Fill SOC_FW_CONFIG related information */
- {
- .image_id = SOC_FW_CONFIG_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ {
+ .image_id = SOC_FW_CONFIG_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
# if ENABLE_RME
/* Fill RMM related information */
- {
- .image_id = RMM_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, EP_REALM | EXECUTABLE),
- .ep_info.pc = RMM_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = RMM_BASE,
- .image_info.image_max_size = RMM_LIMIT - RMM_BASE,
- .next_handoff_image_id = BL33_IMAGE_ID,
- },
+ {
+ .image_id = RMM_IMAGE_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, EP_REALM | EXECUTABLE),
+ .ep_info.pc = RMM_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = RMM_BASE,
+ .image_info.image_max_size = RMM_LIMIT - RMM_BASE,
+ .next_handoff_image_id = BL33_IMAGE_ID,
+ },
# endif
# ifdef BL32_BASE
/* Fill BL32 related information */
- {
- .image_id = BL32_IMAGE_ID,
+ {
+ .image_id = BL32_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
- .ep_info.pc = BL32_BASE,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+ .ep_info.pc = BL32_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = BL32_BASE,
- .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
# if ENABLE_RME
- .next_handoff_image_id = RMM_IMAGE_ID,
+ .next_handoff_image_id = RMM_IMAGE_ID,
# else
- .next_handoff_image_id = BL33_IMAGE_ID,
+ .next_handoff_image_id = BL33_IMAGE_ID,
# endif
- },
+ },
/*
* Fill BL32 external 1 related information.
- * A typical use for extra1 image is with OP-TEE where it is the pager image.
+ * A typical use for extra1 image is with OP-TEE where it is the pager
+ * image.
*/
- {
- .image_id = BL32_EXTRA1_IMAGE_ID,
+ {
+ .image_id = BL32_EXTRA1_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
- .image_info.image_base = BL32_BASE,
- .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
/*
* Fill BL32 external 2 related information.
- * A typical use for extra2 image is with OP-TEE where it is the paged image.
+ * A typical use for extra2 image is with OP-TEE where it is the paged
+ * image.
*/
- {
- .image_id = BL32_EXTRA2_IMAGE_ID,
+ {
+ .image_id = BL32_EXTRA2_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
#ifdef SPD_opteed
- .image_info.image_base = ARM_OPTEE_PAGEABLE_LOAD_BASE,
- .image_info.image_max_size = ARM_OPTEE_PAGEABLE_LOAD_SIZE,
+ .image_info.image_base = ARM_OPTEE_PAGEABLE_LOAD_BASE,
+ .image_info.image_max_size = ARM_OPTEE_PAGEABLE_LOAD_SIZE,
#endif
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
/* Fill TOS_FW_CONFIG related information */
- {
- .image_id = TOS_FW_CONFIG_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ {
+ .image_id = TOS_FW_CONFIG_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
# endif /* BL32_BASE */
/* Fill BL33 related information */
- {
- .image_id = BL33_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+ {
+ .image_id = BL33_IMAGE_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
# ifdef PRELOADED_BL33_BASE
- .ep_info.pc = PRELOADED_BL33_BASE,
+ .ep_info.pc = PRELOADED_BL33_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
# else
- .ep_info.pc = PLAT_ARM_NS_IMAGE_BASE,
+ .ep_info.pc = PLAT_ARM_NS_IMAGE_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = PLAT_ARM_NS_IMAGE_BASE,
- .image_info.image_max_size = ARM_DRAM1_BASE + ARM_DRAM1_SIZE
- - PLAT_ARM_NS_IMAGE_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = PLAT_ARM_NS_IMAGE_BASE,
+ .image_info.image_max_size = ARM_DRAM1_BASE + ARM_DRAM1_SIZE
+ - PLAT_ARM_NS_IMAGE_BASE,
# endif /* PRELOADED_BL33_BASE */
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
/* Fill NT_FW_CONFIG related information */
- {
- .image_id = NT_FW_CONFIG_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
- VERSION_2, entry_point_info_t, NON_SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
- .next_handoff_image_id = INVALID_IMAGE_ID,
- }
+ {
+ .image_id = NT_FW_CONFIG_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t,
+ NON_SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ }
#endif /* EL3_PAYLOAD_BASE */
};
diff --git a/plat/brcm/common/brcm_bl2_mem_params_desc.c b/plat/brcm/common/brcm_bl2_mem_params_desc.c
index f711354..aed99d9 100644
--- a/plat/brcm/common/brcm_bl2_mem_params_desc.c
+++ b/plat/brcm/common/brcm_bl2_mem_params_desc.c
@@ -22,84 +22,84 @@
#ifdef SCP_BL2_BASE
/* Fill SCP_BL2 related information if it exists */
{
- .image_id = SCP_BL2_IMAGE_ID,
+ .image_id = SCP_BL2_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = SCP_BL2_BASE,
- .image_info.image_max_size = PLAT_MAX_SCP_BL2_SIZE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = SCP_BL2_BASE,
+ .image_info.image_max_size = PLAT_MAX_SCP_BL2_SIZE,
- .next_handoff_image_id = INVALID_IMAGE_ID,
+ .next_handoff_image_id = INVALID_IMAGE_ID,
},
#endif /* SCP_BL2_BASE */
/* Fill BL31 related information */
{
- .image_id = BL31_IMAGE_ID,
+ .image_id = BL31_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t,
- SECURE | EXECUTABLE | EP_FIRST_EXE),
- .ep_info.pc = BL31_BASE,
- .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = BL31_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
#if DEBUG
- .ep_info.args.arg3 = BRCM_BL31_PLAT_PARAM_VAL,
+ .ep_info.args.arg3 = BRCM_BL31_PLAT_PARAM_VAL,
#endif
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
- .image_info.image_base = BL31_BASE,
- .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+ .image_info.image_base = BL31_BASE,
+ .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
#ifdef BL32_BASE
- .next_handoff_image_id = BL32_IMAGE_ID,
+ .next_handoff_image_id = BL32_IMAGE_ID,
#else
- .next_handoff_image_id = BL33_IMAGE_ID,
+ .next_handoff_image_id = BL33_IMAGE_ID,
#endif
},
#ifdef BL32_BASE
/* Fill BL32 related information */
{
- .image_id = BL32_IMAGE_ID,
+ .image_id = BL32_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
- .ep_info.pc = BL32_BASE,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+ .ep_info.pc = BL32_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = BL32_BASE,
- .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
- .next_handoff_image_id = BL33_IMAGE_ID,
+ .next_handoff_image_id = BL33_IMAGE_ID,
},
#endif /* BL32_BASE */
/* Fill BL33 related information */
{
- .image_id = BL33_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+ .image_id = BL33_IMAGE_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
#ifdef PRELOADED_BL33_BASE
- .ep_info.pc = PRELOADED_BL33_BASE,
+ .ep_info.pc = PRELOADED_BL33_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
#else
- .ep_info.pc = PLAT_BRCM_NS_IMAGE_OFFSET,
+ .ep_info.pc = PLAT_BRCM_NS_IMAGE_OFFSET,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = PLAT_BRCM_NS_IMAGE_OFFSET,
- .image_info.image_max_size = BRCM_DRAM1_SIZE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = PLAT_BRCM_NS_IMAGE_OFFSET,
+ .image_info.image_max_size = BRCM_DRAM1_SIZE,
#endif /* PRELOADED_BL33_BASE */
- .next_handoff_image_id = INVALID_IMAGE_ID,
+ .next_handoff_image_id = INVALID_IMAGE_ID,
}
};
diff --git a/plat/hisilicon/hikey/hikey_bl2_mem_params_desc.c b/plat/hisilicon/hikey/hikey_bl2_mem_params_desc.c
index 4e013a0..d029703 100644
--- a/plat/hisilicon/hikey/hikey_bl2_mem_params_desc.c
+++ b/plat/hisilicon/hikey/hikey_bl2_mem_params_desc.c
@@ -21,144 +21,146 @@
static bl_mem_params_node_t bl2_mem_params_descs[] = {
#ifdef SCP_BL2_BASE
/* Fill SCP_BL2 related information if it exists */
- {
- .image_id = SCP_BL2_IMAGE_ID,
+ {
+ .image_id = SCP_BL2_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
- VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
- .image_info.image_base = SCP_BL2_BASE,
- .image_info.image_max_size = SCP_BL2_SIZE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+ .image_info.image_base = SCP_BL2_BASE,
+ .image_info.image_max_size = SCP_BL2_SIZE,
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
#endif /* SCP_BL2_BASE */
#ifdef EL3_PAYLOAD_BASE
/* Fill EL3 payload related information (BL31 is EL3 payload)*/
- {
- .image_id = BL31_IMAGE_ID,
+ {
+ .image_id = BL31_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t,
- SECURE | EXECUTABLE | EP_FIRST_EXE),
- .ep_info.pc = EL3_PAYLOAD_BASE,
- .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = EL3_PAYLOAD_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t,
- IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t,
+ IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
#else /* EL3_PAYLOAD_BASE */
/* Fill BL31 related information */
- {
- .image_id = BL31_IMAGE_ID,
+ {
+ .image_id = BL31_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t,
- SECURE | EXECUTABLE | EP_FIRST_EXE),
- .ep_info.pc = BL31_BASE,
- .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = BL31_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
#if DEBUG
- .ep_info.args.arg1 = HIKEY_BL31_PLAT_PARAM_VAL,
+ .ep_info.args.arg1 = HIKEY_BL31_PLAT_PARAM_VAL,
#endif
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
- .image_info.image_base = BL31_BASE,
- .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+ .image_info.image_base = BL31_BASE,
+ .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
# ifdef BL32_BASE
- .next_handoff_image_id = BL32_IMAGE_ID,
+ .next_handoff_image_id = BL32_IMAGE_ID,
# else
- .next_handoff_image_id = BL33_IMAGE_ID,
+ .next_handoff_image_id = BL33_IMAGE_ID,
# endif
- },
+ },
# ifdef BL32_BASE
/* Fill BL32 related information */
- {
- .image_id = BL32_IMAGE_ID,
+ {
+ .image_id = BL32_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
- .ep_info.pc = BL32_BASE,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+ .ep_info.pc = BL32_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = BL32_BASE,
- .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
- .next_handoff_image_id = BL33_IMAGE_ID,
- },
+ .next_handoff_image_id = BL33_IMAGE_ID,
+ },
/*
* Fill BL32 external 1 related information.
- * A typical use for extra1 image is with OP-TEE where it is the pager image.
+ * A typical use for extra1 image is with OP-TEE where it is the pager
+ * image.
*/
- {
- .image_id = BL32_EXTRA1_IMAGE_ID,
+ {
+ .image_id = BL32_EXTRA1_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
- .image_info.image_base = BL32_BASE,
- .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
/*
* Fill BL32 external 2 related information.
- * A typical use for extra2 image is with OP-TEE where it is the paged image.
+ * A typical use for extra2 image is with OP-TEE where it is the paged
+ * image.
*/
- {
- .image_id = BL32_EXTRA2_IMAGE_ID,
+ {
+ .image_id = BL32_EXTRA2_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
#ifdef SPD_opteed
- .image_info.image_base = HIKEY_OPTEE_PAGEABLE_LOAD_BASE,
- .image_info.image_max_size = HIKEY_OPTEE_PAGEABLE_LOAD_SIZE,
+ .image_info.image_base = HIKEY_OPTEE_PAGEABLE_LOAD_BASE,
+ .image_info.image_max_size = HIKEY_OPTEE_PAGEABLE_LOAD_SIZE,
#endif
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
# endif /* BL32_BASE */
/* Fill BL33 related information */
- {
- .image_id = BL33_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+ {
+ .image_id = BL33_IMAGE_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
# ifdef PRELOADED_BL33_BASE
- .ep_info.pc = PRELOADED_BL33_BASE,
+ .ep_info.pc = PRELOADED_BL33_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
# else
- .ep_info.pc = HIKEY_NS_IMAGE_OFFSET,
+ .ep_info.pc = HIKEY_NS_IMAGE_OFFSET,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = HIKEY_NS_IMAGE_OFFSET,
- .image_info.image_max_size = 0x200000 /* 2MB */,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = HIKEY_NS_IMAGE_OFFSET,
+ .image_info.image_max_size = 0x200000 /* 2MB */,
# endif /* PRELOADED_BL33_BASE */
- .next_handoff_image_id = INVALID_IMAGE_ID,
- }
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ }
#endif /* EL3_PAYLOAD_BASE */
};
diff --git a/plat/hisilicon/hikey960/hikey960_bl2_mem_params_desc.c b/plat/hisilicon/hikey960/hikey960_bl2_mem_params_desc.c
index ba236d2..39a54cb 100644
--- a/plat/hisilicon/hikey960/hikey960_bl2_mem_params_desc.c
+++ b/plat/hisilicon/hikey960/hikey960_bl2_mem_params_desc.c
@@ -21,144 +21,146 @@
static bl_mem_params_node_t bl2_mem_params_descs[] = {
#ifdef SCP_BL2_BASE
/* Fill SCP_BL2 related information if it exists */
- {
- .image_id = SCP_BL2_IMAGE_ID,
+ {
+ .image_id = SCP_BL2_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
- VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
- .image_info.image_base = SCP_BL2_BASE,
- .image_info.image_max_size = SCP_BL2_SIZE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+ .image_info.image_base = SCP_BL2_BASE,
+ .image_info.image_max_size = SCP_BL2_SIZE,
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
#endif /* SCP_BL2_BASE */
#ifdef EL3_PAYLOAD_BASE
/* Fill EL3 payload related information (BL31 is EL3 payload)*/
- {
- .image_id = BL31_IMAGE_ID,
+ {
+ .image_id = BL31_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t,
- SECURE | EXECUTABLE | EP_FIRST_EXE),
- .ep_info.pc = EL3_PAYLOAD_BASE,
- .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = EL3_PAYLOAD_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t,
- IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t,
+ IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
#else /* EL3_PAYLOAD_BASE */
/* Fill BL31 related information */
- {
- .image_id = BL31_IMAGE_ID,
+ {
+ .image_id = BL31_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t,
- SECURE | EXECUTABLE | EP_FIRST_EXE),
- .ep_info.pc = BL31_BASE,
- .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = BL31_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
#if DEBUG
- .ep_info.args.arg1 = HIKEY960_BL31_PLAT_PARAM_VAL,
+ .ep_info.args.arg1 = HIKEY960_BL31_PLAT_PARAM_VAL,
#endif
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
- .image_info.image_base = BL31_BASE,
- .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+ .image_info.image_base = BL31_BASE,
+ .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
# ifdef BL32_BASE
- .next_handoff_image_id = BL32_IMAGE_ID,
+ .next_handoff_image_id = BL32_IMAGE_ID,
# else
- .next_handoff_image_id = BL33_IMAGE_ID,
+ .next_handoff_image_id = BL33_IMAGE_ID,
# endif
- },
+ },
# ifdef BL32_BASE
/* Fill BL32 related information */
- {
- .image_id = BL32_IMAGE_ID,
+ {
+ .image_id = BL32_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
- .ep_info.pc = BL32_BASE,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+ .ep_info.pc = BL32_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = BL32_BASE,
- .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
- .next_handoff_image_id = BL33_IMAGE_ID,
- },
+ .next_handoff_image_id = BL33_IMAGE_ID,
+ },
/*
* Fill BL32 external 1 related information.
- * A typical use for extra1 image is with OP-TEE where it is the pager image.
+ * A typical use for extra1 image is with OP-TEE where it is the pager
+ * image.
*/
- {
- .image_id = BL32_EXTRA1_IMAGE_ID,
+ {
+ .image_id = BL32_EXTRA1_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
- .image_info.image_base = BL32_BASE,
- .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
/*
* Fill BL32 external 2 related information.
- * A typical use for extra2 image is with OP-TEE where it is the paged image.
+ * A typical use for extra2 image is with OP-TEE where it is the paged
+ * image.
*/
- {
- .image_id = BL32_EXTRA2_IMAGE_ID,
+ {
+ .image_id = BL32_EXTRA2_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
#ifdef SPD_opteed
- .image_info.image_base = HIKEY960_OPTEE_PAGEABLE_LOAD_BASE,
- .image_info.image_max_size = HIKEY960_OPTEE_PAGEABLE_LOAD_SIZE,
+ .image_info.image_base = HIKEY960_OPTEE_PAGEABLE_LOAD_BASE,
+ .image_info.image_max_size = HIKEY960_OPTEE_PAGEABLE_LOAD_SIZE,
#endif
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
# endif /* BL32_BASE */
/* Fill BL33 related information */
- {
- .image_id = BL33_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+ {
+ .image_id = BL33_IMAGE_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
# ifdef PRELOADED_BL33_BASE
- .ep_info.pc = PRELOADED_BL33_BASE,
+ .ep_info.pc = PRELOADED_BL33_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
# else
- .ep_info.pc = NS_BL1U_BASE,
+ .ep_info.pc = NS_BL1U_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = NS_BL1U_BASE,
- .image_info.image_max_size = 0x200000 /* 2MB */,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = NS_BL1U_BASE,
+ .image_info.image_max_size = 0x200000 /* 2MB */,
# endif /* PRELOADED_BL33_BASE */
- .next_handoff_image_id = INVALID_IMAGE_ID,
- }
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ }
#endif /* EL3_PAYLOAD_BASE */
};
diff --git a/plat/hisilicon/poplar/bl2_plat_mem_params_desc.c b/plat/hisilicon/poplar/bl2_plat_mem_params_desc.c
index f683d75..9bda02e 100644
--- a/plat/hisilicon/poplar/bl2_plat_mem_params_desc.c
+++ b/plat/hisilicon/poplar/bl2_plat_mem_params_desc.c
@@ -22,143 +22,145 @@
#ifdef SCP_BL2_BASE
/* Fill SCP_BL2 related information if it exists */
{
- .image_id = SCP_BL2_IMAGE_ID,
+ .image_id = SCP_BL2_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = SCP_BL2_BASE,
- .image_info.image_max_size = SCP_BL2_SIZE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = SCP_BL2_BASE,
+ .image_info.image_max_size = SCP_BL2_SIZE,
- .next_handoff_image_id = INVALID_IMAGE_ID,
+ .next_handoff_image_id = INVALID_IMAGE_ID,
},
#endif /* SCP_BL2_BASE */
#ifdef EL3_PAYLOAD_BASE
/* Fill EL3 payload related information (BL31 is EL3 payload)*/
{
- .image_id = BL31_IMAGE_ID,
+ .image_id = BL31_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t,
- SECURE | EXECUTABLE | EP_FIRST_EXE),
- .ep_info.pc = EL3_PAYLOAD_BASE,
- .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = EL3_PAYLOAD_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t,
- IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t,
+ IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
- .next_handoff_image_id = INVALID_IMAGE_ID,
+ .next_handoff_image_id = INVALID_IMAGE_ID,
},
#else /* EL3_PAYLOAD_BASE */
/* Fill BL31 related information */
{
- .image_id = BL31_IMAGE_ID,
+ .image_id = BL31_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t,
- SECURE | EXECUTABLE | EP_FIRST_EXE),
- .ep_info.pc = BL31_BASE,
- .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = BL31_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
#if DEBUG
- .ep_info.args.arg1 = POPLAR_BL31_PLAT_PARAM_VAL,
+ .ep_info.args.arg1 = POPLAR_BL31_PLAT_PARAM_VAL,
#endif
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
- .image_info.image_base = BL31_BASE,
- .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+ .image_info.image_base = BL31_BASE,
+ .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
# ifdef BL32_BASE
- .next_handoff_image_id = BL32_IMAGE_ID,
+ .next_handoff_image_id = BL32_IMAGE_ID,
# else
- .next_handoff_image_id = BL33_IMAGE_ID,
+ .next_handoff_image_id = BL33_IMAGE_ID,
# endif
},
# ifdef BL32_BASE
/* Fill BL32 related information */
{
- .image_id = BL32_IMAGE_ID,
+ .image_id = BL32_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
- .ep_info.pc = BL32_BASE,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+ .ep_info.pc = BL32_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = BL32_BASE,
- .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
- .next_handoff_image_id = BL33_IMAGE_ID,
+ .next_handoff_image_id = BL33_IMAGE_ID,
},
/*
* Fill BL32 external 1 related information.
- * A typical use for extra1 image is with OP-TEE where it is the pager image.
+ * A typical use for extra1 image is with OP-TEE where it is the pager
+ * image.
*/
{
- .image_id = BL32_EXTRA1_IMAGE_ID,
+ .image_id = BL32_EXTRA1_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
- .image_info.image_base = BL32_BASE,
- .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
- .next_handoff_image_id = INVALID_IMAGE_ID,
+ .next_handoff_image_id = INVALID_IMAGE_ID,
},
/*
* Fill BL32 external 2 related information.
- * A typical use for extra2 image is with OP-TEE where it is the paged image.
+ * A typical use for extra2 image is with OP-TEE where it is the paged
+ * image.
*/
{
- .image_id = BL32_EXTRA2_IMAGE_ID,
+ .image_id = BL32_EXTRA2_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
#ifdef SPD_opteed
- .image_info.image_base = POPLAR_OPTEE_PAGEABLE_LOAD_BASE,
- .image_info.image_max_size = POPLAR_OPTEE_PAGEABLE_LOAD_SIZE,
+ .image_info.image_base = POPLAR_OPTEE_PAGEABLE_LOAD_BASE,
+ .image_info.image_max_size = POPLAR_OPTEE_PAGEABLE_LOAD_SIZE,
#endif
- .next_handoff_image_id = INVALID_IMAGE_ID,
+ .next_handoff_image_id = INVALID_IMAGE_ID,
},
# endif /* BL32_BASE */
/* Fill BL33 related information */
{
- .image_id = BL33_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+ .image_id = BL33_IMAGE_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
# ifdef PRELOADED_BL33_BASE
- .ep_info.pc = PRELOADED_BL33_BASE,
+ .ep_info.pc = PRELOADED_BL33_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
# else
- .ep_info.pc = PLAT_POPLAR_NS_IMAGE_OFFSET,
+ .ep_info.pc = PLAT_POPLAR_NS_IMAGE_OFFSET,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = PLAT_POPLAR_NS_IMAGE_OFFSET,
- .image_info.image_max_size = DDR_BASE + DDR_SIZE -
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = PLAT_POPLAR_NS_IMAGE_OFFSET,
+ .image_info.image_max_size = DDR_BASE + DDR_SIZE -
PLAT_POPLAR_NS_IMAGE_OFFSET,
# endif /* PRELOADED_BL33_BASE */
- .next_handoff_image_id = INVALID_IMAGE_ID,
+ .next_handoff_image_id = INVALID_IMAGE_ID,
}
#endif /* EL3_PAYLOAD_BASE */
};
diff --git a/plat/intel/soc/common/bl2_plat_mem_params_desc.c b/plat/intel/soc/common/bl2_plat_mem_params_desc.c
index 4f75665..187c53a 100644
--- a/plat/intel/soc/common/bl2_plat_mem_params_desc.c
+++ b/plat/intel/soc/common/bl2_plat_mem_params_desc.c
@@ -22,58 +22,58 @@
#ifdef SCP_BL2_BASE
/* Fill SCP_BL2 related information if it exists */
{
- .image_id = SCP_BL2_IMAGE_ID,
+ .image_id = SCP_BL2_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = SCP_BL2_BASE,
- .image_info.image_max_size = SCP_BL2_SIZE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = SCP_BL2_BASE,
+ .image_info.image_max_size = SCP_BL2_SIZE,
- .next_handoff_image_id = INVALID_IMAGE_ID,
+ .next_handoff_image_id = INVALID_IMAGE_ID,
},
#endif /* SCP_BL2_BASE */
#ifdef EL3_PAYLOAD_BASE
/* Fill EL3 payload related information (BL31 is EL3 payload)*/
{
- .image_id = BL31_IMAGE_ID,
+ .image_id = BL31_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t,
- SECURE | EXECUTABLE | EP_FIRST_EXE),
- .ep_info.pc = EL3_PAYLOAD_BASE,
- .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = EL3_PAYLOAD_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t,
- IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t,
+ IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
- .next_handoff_image_id = INVALID_IMAGE_ID,
+ .next_handoff_image_id = INVALID_IMAGE_ID,
},
#else /* EL3_PAYLOAD_BASE */
/* Fill BL31 related information */
{
- .image_id = BL31_IMAGE_ID,
+ .image_id = BL31_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t,
- SECURE | EXECUTABLE | EP_FIRST_EXE),
- .ep_info.pc = BL31_BASE,
- .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = BL31_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
- .image_info.image_base = BL31_BASE,
- .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+ .image_info.image_base = BL31_BASE,
+ .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
- .next_handoff_image_id = BL33_IMAGE_ID,
+ .next_handoff_image_id = BL33_IMAGE_ID,
},
#endif /* EL3_PAYLOAD_BASE */
diff --git a/plat/marvell/armada/common/aarch64/marvell_bl2_mem_params_desc.c b/plat/marvell/armada/common/aarch64/marvell_bl2_mem_params_desc.c
index 8d909dc..6c55858 100644
--- a/plat/marvell/armada/common/aarch64/marvell_bl2_mem_params_desc.c
+++ b/plat/marvell/armada/common/aarch64/marvell_bl2_mem_params_desc.c
@@ -22,84 +22,84 @@
static bl_mem_params_node_t bl2_mem_params_descs[] = {
#ifdef SCP_BL2_BASE
/* Fill SCP_BL2 related information if it exists */
- {
- .image_id = SCP_BL2_IMAGE_ID,
+ {
+ .image_id = SCP_BL2_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = SCP_BL2_BASE,
- .image_info.image_max_size = SCP_BL2_SIZE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = SCP_BL2_BASE,
+ .image_info.image_max_size = SCP_BL2_SIZE,
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
#endif /* SCP_BL2_BASE */
#ifdef EL3_PAYLOAD_BASE
/* Fill EL3 payload related information (BL31 is EL3 payload)*/
- {
- .image_id = BL31_IMAGE_ID,
+ {
+ .image_id = BL31_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t,
- SECURE | EXECUTABLE | EP_FIRST_EXE),
- .ep_info.pc = EL3_PAYLOAD_BASE,
- .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = EL3_PAYLOAD_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t,
- IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t,
+ IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
- .next_handoff_image_id = INVALID_IMAGE_ID,
- },
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
#else /* EL3_PAYLOAD_BASE */
/* Fill BL31 related information */
- {
- .image_id = BL31_IMAGE_ID,
+ {
+ .image_id = BL31_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t,
- SECURE | EXECUTABLE | EP_FIRST_EXE),
- .ep_info.pc = BL31_BASE,
- .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = BL31_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
#if DEBUG
- .ep_info.args.arg3 = MARVELL_BL31_PLAT_PARAM_VAL,
+ .ep_info.args.arg3 = MARVELL_BL31_PLAT_PARAM_VAL,
#endif
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
- .image_info.image_base = BL31_BASE,
- .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+ .image_info.image_base = BL31_BASE,
+ .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
# ifdef BL32_BASE
- .next_handoff_image_id = BL32_IMAGE_ID,
+ .next_handoff_image_id = BL32_IMAGE_ID,
# else
- .next_handoff_image_id = BL33_IMAGE_ID,
+ .next_handoff_image_id = BL33_IMAGE_ID,
# endif
- },
+ },
# ifdef BL32_BASE
/* Fill BL32 related information */
- {
- .image_id = BL32_IMAGE_ID,
+ {
+ .image_id = BL32_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
- .ep_info.pc = BL32_BASE,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+ .ep_info.pc = BL32_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = BL32_BASE,
- .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
- .next_handoff_image_id = BL33_IMAGE_ID,
- },
+ .next_handoff_image_id = BL33_IMAGE_ID,
+ },
/*
* Fill BL32 external 1 related information.
@@ -107,17 +107,17 @@
* where it is the pager image.
*/
{
- .image_id = BL32_EXTRA1_IMAGE_ID,
+ .image_id = BL32_EXTRA1_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
- .image_info.image_base = BL32_BASE,
- .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
- .next_handoff_image_id = INVALID_IMAGE_ID,
+ .next_handoff_image_id = INVALID_IMAGE_ID,
},
/*
@@ -126,42 +126,42 @@
* where it is the paged image.
*/
{
- .image_id = BL32_EXTRA2_IMAGE_ID,
+ .image_id = BL32_EXTRA2_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
#ifdef SPD_opteed
- .image_info.image_base = MARVELL_OPTEE_PAGEABLE_LOAD_BASE,
- .image_info.image_max_size = MARVELL_OPTEE_PAGEABLE_LOAD_SIZE,
+ .image_info.image_base = MARVELL_OPTEE_PAGEABLE_LOAD_BASE,
+ .image_info.image_max_size = MARVELL_OPTEE_PAGEABLE_LOAD_SIZE,
#endif
- .next_handoff_image_id = INVALID_IMAGE_ID,
+ .next_handoff_image_id = INVALID_IMAGE_ID,
},
# endif /* BL32_BASE */
/* Fill BL33 related information */
- {
- .image_id = BL33_IMAGE_ID,
- SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
- VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+ {
+ .image_id = BL33_IMAGE_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
# ifdef PRELOADED_BL33_BASE
- .ep_info.pc = PRELOADED_BL33_BASE,
+ .ep_info.pc = PRELOADED_BL33_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
# else
- .ep_info.pc = MARVELL_DRAM_BASE,
+ .ep_info.pc = MARVELL_DRAM_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
- VERSION_2, image_info_t, 0),
- .image_info.image_base = MARVELL_DRAM_BASE,
- .image_info.image_max_size = MARVELL_DRAM_SIZE,
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = MARVELL_DRAM_BASE,
+ .image_info.image_max_size = MARVELL_DRAM_SIZE,
# endif /* PRELOADED_BL33_BASE */
- .next_handoff_image_id = INVALID_IMAGE_ID,
- }
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ }
#endif /* EL3_PAYLOAD_BASE */
};
diff --git a/plat/mediatek/build_helpers/mtk_build_helpers.mk b/plat/mediatek/build_helpers/mtk_build_helpers.mk
index 47d96fa..fc3876e 100644
--- a/plat/mediatek/build_helpers/mtk_build_helpers.mk
+++ b/plat/mediatek/build_helpers/mtk_build_helpers.mk
@@ -116,20 +116,23 @@
# Include MTK configuration files
# MTK makefile variables
+ifeq (${COREBOOT},1)
+MTK_COMMON_CFG := $(MTK_PLAT)/common/coreboot_config.mk
+else
+MTK_COMMON_CFG := $(MTK_PLAT)/common/common_config.mk
+endif
MTK_PLAT := plat/mediatek
MTK_PLAT_SOC := ${MTK_PLAT}/${MTK_SOC}
-MTK_COMMON_CFG := $(MTK_PLAT)/common/common_config.mk
MTK_PLAT_CFG := $(MTK_PLAT_SOC)/plat_config.mk
MTK_PROJECT_CFG := $(MTK_PLAT)/project/$(PLAT)/project_config.mk
MTK_OPTIONS := $(MTK_PLAT)/build_helpers/options.mk
MTK_COND_EVAL := $(MTK_PLAT)/build_helpers/conditional_eval_options.mk
# Indicate which BL should be built in command line
-ifeq (${NEED_BL31},yes)
-MTK_BL := bl31
-endif
ifeq (${NEED_BL32},yes)
MTK_BL := bl32
+else
+MTK_BL := bl31
endif
# Include common, platform, board level config
include $(MTK_COMMON_CFG)
diff --git a/plat/mediatek/build_helpers/options.mk b/plat/mediatek/build_helpers/options.mk
index 394a605..eb579e5 100644
--- a/plat/mediatek/build_helpers/options.mk
+++ b/plat/mediatek/build_helpers/options.mk
@@ -6,7 +6,7 @@
# call add_defined_option to evaluate MTK defined value
$(eval $(call add_defined_option,MTK_SIP_KERNEL_BOOT_ENABLE))
-$(eval $(call add_defined_option,PLAT_EXTRA_LD_SCRIPT))
+$(eval $(call add_defined_option,PLAT_EXTRA_RODATA_INCLUDES))
$(eval $(call add_defined_option,MTK_EXTRA_LINKERFILE))
$(eval $(call add_defined_option,MTK_BL31_AS_BL2))
$(eval $(call add_defined_option,MTK_BL33_IS_64BIT))
diff --git a/plat/mediatek/common/cold_boot.c b/plat/mediatek/common/cold_boot.c
new file mode 100644
index 0000000..ff585fe
--- /dev/null
+++ b/plat/mediatek/common/cold_boot.c
@@ -0,0 +1,336 @@
+/*
+ * Copyright (c) 2022, Mediatek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <inttypes.h>
+#include <stdint.h>
+#include <common/debug.h>
+#include <common/runtime_svc.h>
+#include <lib/el3_runtime/context_mgmt.h>
+
+/* Vendors headers */
+#include <cold_boot.h>
+#include <lib/mtk_init/mtk_init.h>
+#include <mtk_sip_svc.h>
+
+static struct kernel_info k_info;
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+static bool el1_is_2nd_bootloader = true;
+static struct atf_arg_t atfarg;
+
+static int init_mtk_bl32_arg(void)
+{
+ struct mtk_bl_param_t *p_mtk_bl_param;
+ struct atf_arg_t *p_atfarg;
+
+ p_mtk_bl_param = (struct mtk_bl_param_t *) get_mtk_bl31_fw_config(BOOT_ARG_FROM_BL2);
+ if (p_mtk_bl_param == NULL) {
+ ERROR("p_mtk_bl_param is NULL!\n");
+ return -1;
+ }
+ p_atfarg = (struct atf_arg_t *)p_mtk_bl_param->atf_arg_addr;
+ if (p_atfarg == NULL) {
+ ERROR("bl32 argument is NULL!\n");
+ return -1;
+ }
+ memcpy((void *)&atfarg, (void *)p_atfarg, sizeof(struct atf_arg_t));
+ return 0;
+}
+MTK_EARLY_PLAT_INIT(init_mtk_bl32_arg);
+
+static void save_kernel_info(uint64_t pc, uint64_t r0, uint64_t r1, uint64_t k32_64)
+{
+ k_info.k32_64 = k32_64;
+ k_info.pc = pc;
+
+ if (k32_64 == LINUX_KERNEL_32) {
+ /* for 32 bits kernel */
+ k_info.r0 = 0;
+ /* machtype */
+ k_info.r1 = r0;
+ /* tags */
+ k_info.r2 = r1;
+ } else {
+ /* for 64 bits kernel */
+ k_info.r0 = r0;
+ k_info.r1 = r1;
+ }
+}
+
+static uint32_t plat_get_spsr_for_bl32_64_entry(void)
+{
+ return SPSR_64(MODE_EL1, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+}
+
+#if MTK_BL33_IS_64BIT
+static uint32_t plat_get_spsr_for_bl33_entry(void)
+{
+ uint32_t spsr;
+ uint32_t mode;
+
+ mode = MODE_EL1;
+ spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+ return spsr;
+}
+#else
+static uint32_t plat_get_spsr_for_bl33_entry(void)
+{
+ unsigned int mode;
+ uint32_t spsr;
+ unsigned int ee;
+ unsigned long daif;
+
+ INFO("Secondary bootloader is AArch32\n");
+ mode = MODE32_svc;
+ ee = 0;
+ /*
+ * TODO: Choose async. exception bits if HYP mode is not
+ * implemented according to the values of SCR.{AW, FW} bits
+ */
+ daif = DAIF_ABT_BIT | DAIF_IRQ_BIT | DAIF_FIQ_BIT;
+
+ spsr = SPSR_MODE32(mode, 0, ee, daif);
+ return spsr;
+}
+#endif
+
+static void populate_bl32_image_ep(entry_point_info_t *bl32_ep_instance,
+ struct mtk_bl_param_t *p_mtk_bl_param)
+{
+ entry_point_info_t *populated_ep_bl32 = bl32_ep_instance;
+
+ if (p_mtk_bl_param == NULL) {
+ ERROR("p_mtk_bl_param is NULL!\n");
+ panic();
+ }
+ SET_SECURITY_STATE(bl32_ep_instance->h.attr, SECURE);
+ SET_PARAM_HEAD(populated_ep_bl32,
+ PARAM_EP,
+ VERSION_1,
+ populated_ep_bl32->h.attr);
+ populated_ep_bl32->pc = atfarg.tee_entry;
+ populated_ep_bl32->spsr = plat_get_spsr_for_bl32_64_entry();
+}
+
+static void populate_bl33_image_ep(entry_point_info_t *bl33_ep_instance,
+ struct mtk_bl_param_t *p_mtk_bl_param)
+{
+ entry_point_info_t *populated_ep_bl33 = bl33_ep_instance;
+
+ if (p_mtk_bl_param == NULL) {
+ ERROR("p_mtk_bl_param is NULL!\n");
+ panic();
+ }
+ SET_SECURITY_STATE(bl33_ep_instance->h.attr, NON_SECURE);
+ SET_PARAM_HEAD(populated_ep_bl33,
+ PARAM_EP,
+ VERSION_1,
+ populated_ep_bl33->h.attr);
+ populated_ep_bl33->pc = p_mtk_bl_param->bl33_start_addr;
+ /* standardize 2nd bootloader input argument */
+ populated_ep_bl33->args.arg0 = p_mtk_bl_param->bootarg_loc;
+ /* compatible to old GZ version */
+ populated_ep_bl33->args.arg4 = p_mtk_bl_param->bootarg_loc;
+ populated_ep_bl33->args.arg5 = p_mtk_bl_param->bootarg_size;
+ populated_ep_bl33->spsr = plat_get_spsr_for_bl33_entry();
+}
+
+static int populate_bl_images_ep(struct mtk_bl_param_t *p_mtk_bl_param)
+{
+ /*
+ * Tell BL31 where the non-trusted software image
+ * is located and the entry state information
+ */
+ populate_bl33_image_ep(&bl33_image_ep_info, p_mtk_bl_param);
+ populate_bl32_image_ep(&bl32_image_ep_info, p_mtk_bl_param);
+ return 0;
+}
+
+static int populate_bl_images_ep_init(void)
+{
+ return populate_bl_images_ep(get_mtk_bl31_fw_config(BOOT_ARG_FROM_BL2));
+}
+MTK_PLAT_SETUP_0_INIT(populate_bl_images_ep_init);
+
+static entry_point_info_t *bl31_plat_get_next_kernel64_ep_info(void)
+{
+ entry_point_info_t *next_image_info;
+ unsigned long el_status;
+ unsigned int mode;
+
+ el_status = 0;
+ mode = 0;
+
+ /* Kernel image is always non-secured */
+ next_image_info = &bl33_image_ep_info;
+
+ /* Figure out what mode we enter the non-secure world in */
+ el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
+ el_status &= ID_AA64PFR0_ELX_MASK;
+
+ INFO("Kernel_EL %d\n", el_status?2:1);
+ if (el_status) {
+ mode = MODE_EL2;
+ } else {
+ mode = MODE_EL1;
+ }
+ INFO("Kernel is 64Bit\n");
+ next_image_info->spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+ next_image_info->pc = k_info.pc;
+ next_image_info->args.arg0 = k_info.r0;
+ next_image_info->args.arg1 = k_info.r1;
+
+ INFO("pc=0x%lx, r0=0x%" PRIx64 ", r1=0x%" PRIx64 "\n",
+ next_image_info->pc,
+ next_image_info->args.arg0,
+ next_image_info->args.arg1);
+
+ SET_SECURITY_STATE(next_image_info->h.attr, NON_SECURE);
+
+ /* None of the images on this platform can have 0x0 as the entrypoint */
+ if (next_image_info->pc) {
+ return next_image_info;
+ }
+
+ return NULL;
+}
+
+static entry_point_info_t *bl31_plat_get_next_kernel32_ep_info(void)
+{
+ entry_point_info_t *next_image_info;
+ unsigned int mode;
+
+ mode = 0;
+
+ /* Kernel image is always non-secured */
+ next_image_info = &bl33_image_ep_info;
+
+ /* Figure out what mode we enter the non-secure world in */
+ mode = MODE32_hyp;
+ /*
+ * TODO: Consider the possibility of specifying the SPSR in
+ * the FIP ToC and allowing the platform to have a say as
+ * well.
+ */
+
+ INFO("Kernel is 32Bit\n");
+ next_image_info->spsr = SPSR_MODE32(mode, SPSR_T_ARM, SPSR_E_LITTLE,
+ (DAIF_FIQ_BIT | DAIF_IRQ_BIT | DAIF_ABT_BIT));
+ next_image_info->pc = k_info.pc;
+ next_image_info->args.arg0 = k_info.r0;
+ next_image_info->args.arg1 = k_info.r1;
+ next_image_info->args.arg2 = k_info.r2;
+
+ INFO("pc=0x%lx, r0=0x%" PRIx64 ", r1=0x%" PRIx64 ", r2=0x%" PRIx64 "\n",
+ next_image_info->pc,
+ next_image_info->args.arg0,
+ next_image_info->args.arg1,
+ next_image_info->args.arg2);
+
+ SET_SECURITY_STATE(next_image_info->h.attr, NON_SECURE);
+
+ /* None of the images on this platform can have 0x0 as the entrypoint */
+ if (next_image_info->pc) {
+ return next_image_info;
+ }
+
+ return NULL;
+}
+
+static void bl31_prepare_kernel_entry(uint64_t k32_64)
+{
+ entry_point_info_t *next_image_info = NULL;
+ uint32_t image_type;
+
+ /* Determine which image to execute next */
+ image_type = NON_SECURE; /* bl31_get_next_image_type(); */
+
+ /* Leave 2nd bootloader then jump to kernel */
+ el1_is_2nd_bootloader = false;
+
+ /* Program EL3 registers to enable entry into the next EL */
+ if (k32_64 == LINUX_KERNEL_32) {
+ next_image_info = bl31_plat_get_next_kernel32_ep_info();
+ } else {
+ next_image_info = bl31_plat_get_next_kernel64_ep_info();
+ }
+
+ assert(next_image_info);
+ assert(image_type == GET_SECURITY_STATE(next_image_info->h.attr));
+
+ INFO("BL31: Preparing for EL3 exit to %s world, Kernel\n",
+ (image_type == SECURE) ? "secure" : "normal");
+ INFO("BL31: Next image address = 0x%" PRIx64 "\n",
+ next_image_info->pc);
+ INFO("BL31: Next image spsr = 0x%x\n", next_image_info->spsr);
+ cm_init_my_context(next_image_info);
+ cm_prepare_el3_exit(image_type);
+}
+
+bool is_el1_2nd_bootloader(void)
+{
+ return el1_is_2nd_bootloader;
+}
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for
+ * the security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+ entry_point_info_t *next_image_info;
+
+ next_image_info = (type == NON_SECURE) ? &bl33_image_ep_info : &bl32_image_ep_info;
+
+ /* None of the images on this platform can have 0x0 as the entrypoint */
+ if (next_image_info->pc) {
+ return next_image_info;
+ }
+ return NULL;
+}
+
+u_register_t boot_to_kernel(u_register_t x1,
+ u_register_t x2,
+ u_register_t x3,
+ u_register_t x4,
+ void *handle,
+ struct smccc_res *smccc_ret)
+{
+ static uint8_t kernel_boot_once_flag;
+
+ /* only support in booting flow */
+ if (kernel_boot_once_flag == 0) {
+ kernel_boot_once_flag = 1;
+
+ INFO("save kernel info\n");
+ save_kernel_info(x1, x2, x3, x4);
+ bl31_prepare_kernel_entry(x4);
+ INFO("el3_exit\n");
+ /*
+ * FIXME: no better way so far to prevent from
+ * SiP root handler wipe x0~x3 if not assign smccc_ret
+ * return register
+ */
+ smccc_ret->a1 = x3;
+
+ mtk_init_one_level(MTK_INIT_LVL_BL33_DEFER);
+
+#if MTK_CONSOLE_RUNTIME_DISABLE
+ INFO("Turn off BL31 console\n");
+ mtk_console_core_end();
+#endif
+
+ /* Re-assign as x0 register entering Linux kernel */
+ return x2;
+ }
+ return 0;
+}
+/* Register SiP SMC service */
+DECLARE_SMC_HANDLER(MTK_SIP_KERNEL_BOOT, boot_to_kernel);
diff --git a/plat/mediatek/common/common_config.mk b/plat/mediatek/common/common_config.mk
new file mode 100644
index 0000000..851eb2c
--- /dev/null
+++ b/plat/mediatek/common/common_config.mk
@@ -0,0 +1,34 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# indicate the reset vector address can be programmed
+PROGRAMMABLE_RESET_ADDRESS := 1
+MULTI_CONSOLE_API := 1
+COLD_BOOT_SINGLE_CPU := 1
+# Build flag to include AArch32 registers in cpu context save and restore during
+# world switch. This flag must be set to 0 for AArch64-only platforms.
+CTX_INCLUDE_AARCH32_REGS := 0
+PLAT_XLAT_TABLES_DYNAMIC := 1
+# enable this definition to print irq dump status in tf-a
+GIC_DEBUG := 0
+# Enable stack protector.
+# Allowed values are "all", "strong", "default" and "none"
+ENABLE_STACK_PROTECTOR := strong
+# AMU, Kernel will access amuserenr_el0 if PE supported
+# Firmware _must_ implement AMU support
+ENABLE_AMU := 1
+VENDOR_EXTEND_PUBEVENT_ENABLE := 1
+
+# MTK define options
+MTK_BL33_IS_64BIT := 0
+MTK_ADAPTED := 1
+
+# MTK module config
+CONFIG_MTK_INTERRUPT := y
+CONFIG_MTK_UART := y
+
+# UART baudrate
+UART_BAUDRATE := 921600
diff --git a/plat/mediatek/common/coreboot_config.mk b/plat/mediatek/common/coreboot_config.mk
new file mode 100644
index 0000000..59d18e8
--- /dev/null
+++ b/plat/mediatek/common/coreboot_config.mk
@@ -0,0 +1,15 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# indicate the reset vector address can be programmed
+PROGRAMMABLE_RESET_ADDRESS := 1
+COLD_BOOT_SINGLE_CPU := 1
+# Build flag to include AArch32 registers in cpu context save and restore during
+# world switch. This flag must be set to 0 for AArch64-only platforms.
+CTX_INCLUDE_AARCH32_REGS := 0
+PLAT_XLAT_TABLES_DYNAMIC := 1
+
+VENDOR_EXTEND_PUBEVENT_ENABLE := 1
diff --git a/plat/mediatek/common/custom/oem_svc.c b/plat/mediatek/common/custom/oem_svc.c
deleted file mode 100644
index 27ee6aa..0000000
--- a/plat/mediatek/common/custom/oem_svc.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <assert.h>
-#include <stdint.h>
-
-#include <arch.h>
-#include <arch_helpers.h>
-#include <common/debug.h>
-#include <common/runtime_svc.h>
-#include <plat/common/platform.h>
-#include <tools_share/uuid.h>
-
-#include <oem_svc.h>
-
-/* OEM Service UUID */
-DEFINE_SVC_UUID2(oem_svc_uid,
- 0xd0ad43b9, 0x9b06, 0xe411, 0x91, 0x91,
- 0x08, 0x00, 0x20, 0x0c, 0x9a, 0x66);
-
-/* Setup OEM Services */
-static int32_t oem_svc_setup(void)
-{
- /*
- * Invoke related module setup from here
- */
-
- return 0;
-}
-
-/*******************************************************************************
- * OEM top level handler for servicing SMCs.
- ******************************************************************************/
-uintptr_t oem_smc_handler(uint32_t smc_fid,
- u_register_t x1,
- u_register_t x2,
- u_register_t x3,
- u_register_t x4,
- void *cookie,
- void *handle,
- u_register_t flags)
-{
- WARN("Unimplemented OEM Call: 0x%x\n", smc_fid);
- SMC_RET1(handle, SMC_UNK);
-}
-
-/*
- * Top-level OEM Service SMC handler. This handler will in turn dispatch
- * calls to related SMC handler
- */
-uintptr_t oem_svc_smc_handler(uint32_t smc_fid,
- u_register_t x1,
- u_register_t x2,
- u_register_t x3,
- u_register_t x4,
- void *cookie,
- void *handle,
- u_register_t flags)
-{
- /*
- * Dispatch OEM calls to OEM Common handler and return its return value
- */
- if (is_oem_fid(smc_fid)) {
- return oem_smc_handler(smc_fid, x1, x2, x3, x4, cookie,
- handle, flags);
- }
-
- switch (smc_fid) {
- case OEM_SVC_CALL_COUNT:
- /*
- * Return the number of OEM Service Calls.
- */
- SMC_RET1(handle, OEM_SVC_NUM_CALLS);
-
- case OEM_SVC_UID:
- /* Return UID to the caller */
- SMC_UUID_RET(handle, oem_svc_uid);
-
- case OEM_SVC_VERSION:
- /* Return the version of current implementation */
- SMC_RET2(handle, OEM_VERSION_MAJOR, OEM_VERSION_MINOR);
-
- default:
- WARN("Unimplemented OEM Service Call: 0x%x\n", smc_fid);
- SMC_RET1(handle, SMC_UNK);
- }
-}
-
-/* Register OEM Service Calls as runtime service */
-DECLARE_RT_SVC(
- oem_svc,
- OEN_OEM_START,
- OEN_OEM_END,
- SMC_TYPE_FAST,
- oem_svc_setup,
- oem_svc_smc_handler
-);
diff --git a/plat/mediatek/common/custom/oem_svc.h b/plat/mediatek/common/custom/oem_svc.h
deleted file mode 100644
index 76f7c24..0000000
--- a/plat/mediatek/common/custom/oem_svc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#ifndef OEM_SVC_H
-#define OEM_SVC_H
-
-/*******************************************************************************
- * Defines for runtime services func ids
- ******************************************************************************/
-/*
- * Number of OEM calls (above) implemented.
- */
-#define OEM_SVC_NUM_CALLS 3
-
-/*******************************************************************************
- * Defines for OEM Service queries
- ******************************************************************************/
-/* 0x83000000 - 0x8300FEFF is OEM service calls */
-#define OEM_SVC_CALL_COUNT 0x8300ff00
-#define OEM_SVC_UID 0x8300ff01
-/* 0x8300ff02 is reserved */
-#define OEM_SVC_VERSION 0x8300ff03
-/* 0x8300ff04 - 0x8300FFFF is reserved for future expansion */
-
-/* OEM Service Calls version numbers */
-#define OEM_VERSION_MAJOR 0x0
-#define OEM_VERSION_MINOR 0x1
-
-/* The macros below are used to identify OEM calls from the SMC function ID */
-/* SMC32 ID range from 0x83000000 to 0x83000FFF */
-/* SMC64 ID range from 0xC3000000 to 0xC3000FFF */
-#define OEM_FID_MASK 0xf000u
-#define OEM_FID_VALUE 0u
-#define is_oem_fid(_fid) \
- (((_fid) & OEM_FID_MASK) == OEM_FID_VALUE)
-
-#define OEM_SVC_E_SUCCESS 0
-#define OEM_SVC_E_NOT_SUPPORTED -1
-#define OEM_SVC_E_INVALID_PARAMS -2
-
-#endif /* OEM_SVC_H */
diff --git a/plat/mediatek/common/mtk_bl31_setup.c b/plat/mediatek/common/mtk_bl31_setup.c
new file mode 100644
index 0000000..79ab29d
--- /dev/null
+++ b/plat/mediatek/common/mtk_bl31_setup.c
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <arch.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <drivers/generic_delay_timer.h>
+#if XLAT_TABLES_LIB_V2 && PLAT_XLAT_TABLES_DYNAMIC
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#endif
+#include <plat/common/platform.h>
+
+#if COREBOOT
+#include <common/desc_image_load.h>
+
+#include <drivers/ti/uart/uart_16550.h>
+#include <lib/coreboot.h>
+#include <plat_params.h>
+#endif
+
+/* MTK headers */
+#if MTK_SIP_KERNEL_BOOT_ENABLE
+#include <cold_boot.h>
+#endif
+#include <lib/mtk_init/mtk_init.h>
+#include <mtk_mmap_pool.h>
+
+IMPORT_SYM(uintptr_t, __RW_START__, RW_START);
+IMPORT_SYM(uintptr_t, __DATA_START__, DATA_START);
+
+#if COREBOOT
+static entry_point_info_t bl32_ep_info;
+static entry_point_info_t bl33_ep_info;
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for
+ * the security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+ entry_point_info_t *next_image_info;
+
+ next_image_info = (type == NON_SECURE) ? &bl33_ep_info : &bl32_ep_info;
+ assert(next_image_info->h.type == PARAM_EP);
+
+ /* None of the images on this platform can have 0x0 as the entrypoint */
+ if (next_image_info->pc) {
+ return next_image_info;
+ } else {
+ return NULL;
+ }
+}
+#else
+#ifndef MTK_BL31_AS_BL2
+static struct mtk_bl31_fw_config bl31_fw_config;
+#else
+struct mtk_bl31_fw_config bl31_fw_config;
+#endif
+/* In order to be accessed after MMU enable */
+static struct mtk_bl_param_t bl_param_clone;
+
+void *get_mtk_bl31_fw_config(int index)
+{
+ void *arg = NULL;
+
+ switch (index) {
+ case BOOT_ARG_FROM_BL2:
+ arg = bl31_fw_config.from_bl2;
+ break;
+ case BOOT_ARG_SOC_FW_CONFIG:
+ arg = bl31_fw_config.soc_fw_config;
+ break;
+ case BOOT_ARG_HW_CONFIG:
+ arg = bl31_fw_config.hw_config;
+ break;
+ case BOOT_ARG_RESERVED:
+ arg = bl31_fw_config.reserved;
+ break;
+ default:
+ WARN("Fail to get boot arg, index:%d", index);
+ break;
+ }
+ return arg;
+}
+#endif
+/*****************************************************************************
+ * Perform the very early platform specific architectural setup shared between
+ * ARM standard platforms. This only does basic initialization. Later
+ * architectural setup (bl31_arch_setup()) does not do anything platform
+ * specific.
+ ******************************************************************************/
+void bl31_early_platform_setup2(u_register_t from_bl2,
+ u_register_t soc_fw_config,
+ u_register_t hw_config, u_register_t plat_params_from_bl2)
+
+{
+#if COREBOOT
+ static console_t console;
+
+ params_early_setup(soc_fw_config);
+ if (coreboot_serial.type) {
+ console_16550_register(coreboot_serial.baseaddr,
+ coreboot_serial.input_hertz,
+ coreboot_serial.baud,
+ &console);
+ }
+ bl31_params_parse_helper(from_bl2, &bl32_ep_info, &bl33_ep_info);
+#else
+ struct mtk_bl_param_t *p_mtk_bl_param = (struct mtk_bl_param_t *)from_bl2;
+
+ if (p_mtk_bl_param == NULL) {
+ ERROR("from_bl2 should not be NULL\n");
+ panic();
+ }
+ memcpy(&bl_param_clone, p_mtk_bl_param, sizeof(struct mtk_bl_param_t));
+ bl31_fw_config.from_bl2 = (void *)&bl_param_clone;
+ bl31_fw_config.soc_fw_config = (void *)soc_fw_config;
+ bl31_fw_config.hw_config = (void *)hw_config;
+ bl31_fw_config.reserved = (void *)plat_params_from_bl2;
+#endif
+
+ INFO("MTK BL31 start\n");
+ /* Init delay function */
+ generic_delay_timer_init();
+ /* Initialize module initcall */
+ mtk_init_one_level(MTK_INIT_LVL_EARLY_PLAT);
+}
+
+void bl31_plat_arch_setup(void)
+{
+ const mmap_region_t bl_regions[] = {
+ MAP_BL_RO,
+ MAP_BL_RW,
+#if USE_COHERENT_MEM
+ MAP_BL_COHERENT_RAM,
+#endif
+ {0},
+ };
+
+ mtk_xlat_init(bl_regions);
+ /* Initialize module initcall */
+ mtk_init_one_level(MTK_INIT_LVL_ARCH);
+}
+
+/*****************************************************************************
+ * Perform any BL31 platform setup common to ARM standard platforms
+ ******************************************************************************/
+
+void bl31_platform_setup(void)
+{
+ mtk_init_one_level(MTK_INIT_LVL_PLAT_SETUP_0);
+ mtk_init_one_level(MTK_INIT_LVL_PLAT_SETUP_1);
+}
+
+/*******************************************************************************
+ * Operations before cold CPU leave BL31.
+ * Switch console to runtime state.
+ ******************************************************************************/
+void bl31_plat_runtime_setup(void)
+{
+ mtk_init_one_level(MTK_INIT_LVL_PLAT_RUNTIME);
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+ return SYS_COUNTER_FREQ_IN_HZ;
+}
diff --git a/plat/mediatek/common/mtk_plat_common.c b/plat/mediatek/common/mtk_plat_common.c
index 142b5c9..76f74a9 100644
--- a/plat/mediatek/common/mtk_plat_common.c
+++ b/plat/mediatek/common/mtk_plat_common.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -19,8 +19,6 @@
#include <mtk_sip_svc.h>
#include <plat_private.h>
-struct atf_arg_t gteearg;
-
void clean_top_32b_of_param(uint32_t smc_fid,
u_register_t *px1,
u_register_t *px2,
@@ -28,96 +26,13 @@
u_register_t *px4)
{
/* if parameters from SMC32. Clean top 32 bits */
- if (0 == (smc_fid & SMC_AARCH64_BIT)) {
+ if (GET_SMC_CC(smc_fid) == SMC_64) {
*px1 = *px1 & SMC32_PARAM_MASK;
*px2 = *px2 & SMC32_PARAM_MASK;
*px3 = *px3 & SMC32_PARAM_MASK;
*px4 = *px4 & SMC32_PARAM_MASK;
}
}
-
-#if MTK_SIP_KERNEL_BOOT_ENABLE
-static struct kernel_info k_info;
-
-static void save_kernel_info(uint64_t pc,
- uint64_t r0,
- uint64_t r1,
- uint64_t k32_64)
-{
- k_info.k32_64 = k32_64;
- k_info.pc = pc;
-
- if (LINUX_KERNEL_32 == k32_64) {
- /* for 32 bits kernel */
- k_info.r0 = 0;
- /* machtype */
- k_info.r1 = r0;
- /* tags */
- k_info.r2 = r1;
- } else {
- /* for 64 bits kernel */
- k_info.r0 = r0;
- k_info.r1 = r1;
- }
-}
-
-uint64_t get_kernel_info_pc(void)
-{
- return k_info.pc;
-}
-
-uint64_t get_kernel_info_r0(void)
-{
- return k_info.r0;
-}
-
-uint64_t get_kernel_info_r1(void)
-{
- return k_info.r1;
-}
-
-uint64_t get_kernel_info_r2(void)
-{
- return k_info.r2;
-}
-
-void boot_to_kernel(uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4)
-{
- static uint8_t kernel_boot_once_flag;
- /* only support in booting flow */
- if (0 == kernel_boot_once_flag) {
- kernel_boot_once_flag = 1;
-
- console_init(gteearg.atf_log_port,
- UART_CLOCK, UART_BAUDRATE);
- INFO("save kernel info\n");
- save_kernel_info(x1, x2, x3, x4);
- bl31_prepare_kernel_entry(x4);
- INFO("el3_exit\n");
- console_uninit();
- }
-}
-#endif
-
-uint32_t plat_get_spsr_for_bl33_entry(void)
-{
- unsigned int mode;
- uint32_t spsr;
- unsigned int ee;
- unsigned long daif;
-
- INFO("Secondary bootloader is AArch32\n");
- mode = MODE32_svc;
- ee = 0;
- /*
- * TODO: Choose async. exception bits if HYP mode is not
- * implemented according to the values of SCR.{AW, FW} bits
- */
- daif = DAIF_ABT_BIT | DAIF_IRQ_BIT | DAIF_FIQ_BIT;
-
- spsr = SPSR_MODE32(mode, 0, ee, daif);
- return spsr;
-}
/*****************************************************************************
* plat_is_smccc_feature_available() - This function checks whether SMCCC
diff --git a/plat/mediatek/common/mtk_plat_common.h b/plat/mediatek/common/mtk_plat_common.h
index 919c173..4c14b9d 100644
--- a/plat/mediatek/common/mtk_plat_common.h
+++ b/plat/mediatek/common/mtk_plat_common.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -14,45 +14,11 @@
/*******************************************************************************
* Function and variable prototypes
******************************************************************************/
-#define DEVINFO_SIZE 4
-#define LINUX_KERNEL_32 0
#define SMC32_PARAM_MASK (0xFFFFFFFF)
#define JEDEC_MTK_BKID U(4)
#define JEDEC_MTK_MFID U(0x26)
-struct atf_arg_t {
- unsigned int atf_magic;
- unsigned int tee_support;
- unsigned int tee_entry;
- unsigned int tee_boot_arg_addr;
- unsigned int hwuid[4]; /* HW Unique id for t-base used */
- unsigned int HRID[2]; /* HW random id for t-base used */
- unsigned int atf_log_port;
- unsigned int atf_log_baudrate;
- unsigned int atf_log_buf_start;
- unsigned int atf_log_buf_size;
- unsigned int atf_irq_num;
- unsigned int devinfo[DEVINFO_SIZE];
- unsigned int atf_aee_debug_buf_start;
- unsigned int atf_aee_debug_buf_size;
-};
-
-struct kernel_info {
- uint64_t pc;
- uint64_t r0;
- uint64_t r1;
- uint64_t r2;
- uint64_t k32_64;
-};
-
-struct mtk_bl_param_t {
- uint64_t bootarg_loc;
- uint64_t bootarg_size;
- uint64_t bl33_start_addr;
- uint64_t tee_info_addr;
-};
-
struct mtk_bl31_params {
param_header_t h;
image_info_t *bl31_image_info;
diff --git a/plat/mediatek/common/mtk_sip_svc.h b/plat/mediatek/common/mtk_sip_svc.h
deleted file mode 100644
index 74b17b6..0000000
--- a/plat/mediatek/common/mtk_sip_svc.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-#ifndef MTK_SIP_SVC_H
-#define MTK_SIP_SVC_H
-
-#include <stdint.h>
-
-/* SMC function IDs for SiP Service queries */
-#define SIP_SVC_CALL_COUNT 0x8200ff00
-#define SIP_SVC_UID 0x8200ff01
-/* 0x8200ff02 is reserved */
-#define SIP_SVC_VERSION 0x8200ff03
-
-/* Mediatek SiP Service Calls version numbers */
-#define MTK_SIP_SVC_VERSION_MAJOR 0x0
-#define MTK_SIP_SVC_VERSION_MINOR 0x1
-
-#define SMC_AARCH64_BIT 0x40000000
-
-/* Number of Mediatek SiP Calls implemented */
-#define MTK_COMMON_SIP_NUM_CALLS 4
-
-/* Mediatek SiP Service Calls function IDs */
-#define MTK_SIP_SET_AUTHORIZED_SECURE_REG 0x82000001
-
-/* For MTK SMC from Secure OS */
-/* 0x82000000 - 0x820000FF & 0xC2000000 - 0xC20000FF */
-#define MTK_SIP_KERNEL_BOOT_AARCH32 0x82000200
-#define MTK_SIP_KERNEL_BOOT_AARCH64 0xC2000200
-
-/* VCORE */
-#define MTK_SIP_VCORE_CONTROL_ARCH32 0x82000506
-#define MTK_SIP_VCORE_CONTROL_ARCH64 0xC2000506
-
-/* APUSYS SMC call */
-#define MTK_SIP_APUSYS_CONTROL_AARCH32 0x8200051E
-#define MTK_SIP_APUSYS_CONTROL_AARCH64 0xC200051E
-
-/* Mediatek SiP Calls error code */
-enum {
- MTK_SIP_E_SUCCESS = 0,
- MTK_SIP_E_INVALID_PARAM = -1,
- MTK_SIP_E_NOT_SUPPORTED = -2,
- MTK_SIP_E_INVALID_RANGE = -3,
- MTK_SIP_E_PERMISSION_DENY = -4,
- MTK_SIP_E_LOCK_FAIL = -5
-};
-
-/*
- * This function should be implemented in Mediatek SOC directory. It fullfills
- * MTK_SIP_SET_AUTHORIZED_SECURE_REG SiP call by checking the sreg with the
- * predefined secure register list, if a match was found, set val to sreg.
- *
- * Return MTK_SIP_E_SUCCESS on success, and MTK_SIP_E_INVALID_PARAM on failure.
- */
-uint64_t mt_sip_set_authorized_sreg(uint32_t sreg, uint32_t val);
-
-#endif /* MTK_SIP_SVC_H */
diff --git a/plat/mediatek/common/mtk_smc_handlers.c b/plat/mediatek/common/mtk_smc_handlers.c
new file mode 100644
index 0000000..24b978c
--- /dev/null
+++ b/plat/mediatek/common/mtk_smc_handlers.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <common/debug.h>
+#include <common/runtime_svc.h>
+#include <cold_boot.h>
+#include <lib/mtk_init/mtk_init.h>
+#include <mtk_sip_svc.h>
+
+#define SMC_HANDLER_DEBUG(...) VERBOSE(__VA_ARGS__)
+#define SMC_HANDLER_DEBUG_NOT_IMP_MSG "%s[0x%x] smc handler not implemented\n"
+#define SMC_HANDLER_DEBUG_START_MSG "%s[0x%x] smc handler start, smc desc. index:%d\n"
+#define SMC_HANDLER_DEBUG_END_MSG "%s[0x%x] smc handler end\n"
+
+/*
+ * These macros below are used to identify SIP calls from Kernel,
+ * Hypervisor, or 2ndBootloader
+ */
+#define SIP_FID_ORI_MASK (0xc000)
+#define SIP_FID_ORI_SHIFT (14)
+#define SIP_FID_KERNEL (0x0)
+#define SIP_FID_KERNEL_VIA_GZ (0x1)
+#define SIP_FID_GZ (0x2)
+
+#define GET_SMC_ORI(_fid) (((_fid) & SIP_FID_ORI_MASK) >> SIP_FID_ORI_SHIFT)
+#define GET_SMC_ORI_NUM(_fid) ((_fid) & ~(SIP_FID_ORI_MASK))
+
+#define is_from_nsel2(_ori) (_ori == SIP_FID_GZ)
+#define is_from_bl33(_ori) \
+ ((_ori != SIP_FID_GZ) && (is_el1_2nd_bootloader() == 1))
+#define is_from_nsel1(_ori) \
+ (((_ori == SIP_FID_KERNEL) || \
+ (_ori == SIP_FID_KERNEL_VIA_GZ)) && \
+ (is_el1_2nd_bootloader() == 0))
+
+#define is_smc_forbidden(_ori) (_ori == SIP_FID_KERNEL_VIA_GZ)
+
+#define MASK_32_BIT (0xffffffffU)
+#define SMC_ID_EXPAND_AS_SMC_OPERATION(_smc_id, _smc_num) \
+ case _smc_id##_AARCH32: \
+ { \
+ x1 = x1 & MASK_32_BIT; \
+ x2 = x2 & MASK_32_BIT; \
+ x3 = x3 & MASK_32_BIT; \
+ x4 = x4 & MASK_32_BIT; \
+ } \
+ case _smc_id##_AARCH64: \
+ { \
+ if (_smc_id##_descriptor_index < 0) { \
+ SMC_HANDLER_DEBUG(SMC_HANDLER_DEBUG_NOT_IMP_MSG, #_smc_id, smc_id); \
+ break; \
+ } \
+ if (_smc_id##_descriptor_index >= smc_id_descriptor_max) { \
+ SMC_HANDLER_DEBUG("smc descriptor index[%d] exceed max[%d]\n", \
+ _smc_id##_descriptor_index, smc_id_descriptor_max); \
+ break; \
+ } \
+ SMC_HANDLER_DEBUG(SMC_HANDLER_DEBUG_START_MSG, #_smc_id, smc_id, \
+ _smc_id##_descriptor_index); \
+ ret = smc_handler_pool[_smc_id##_descriptor_index].smc_handler(x1,\
+ x2, x3, x4, handle, &smc_ret); \
+ SMC_HANDLER_DEBUG(SMC_HANDLER_DEBUG_END_MSG, #_smc_id, smc_id); \
+ break; \
+ }
+
+#define SMC_ID_EXPAND_AS_DESCRIPTOR_INDEX(_smc_id, _smc_num) \
+ short _smc_id##_descriptor_index __section("mtk_plat_ro") = -1;
+
+MTK_SIP_SMC_FROM_BL33_TABLE(SMC_ID_EXPAND_AS_DESCRIPTOR_INDEX);
+MTK_SIP_SMC_FROM_NS_EL1_TABLE(SMC_ID_EXPAND_AS_DESCRIPTOR_INDEX);
+
+IMPORT_SYM(uintptr_t, __MTK_SMC_POOL_START__, MTK_SMC_POOL_START);
+IMPORT_SYM(uintptr_t, __MTK_SMC_POOL_END_UNALIGNED__, MTK_SMC_POOL_END_UNALIGNED);
+
+static const struct smc_descriptor *smc_handler_pool;
+static short smc_id_descriptor_max;
+
+#if !MTK_SIP_KERNEL_BOOT_ENABLE
+/*
+ * If there is no SMC request needs to be served in 2nd bootloader,
+ * disable the service path inherently.
+ */
+bool is_el1_2nd_bootloader(void)
+{
+ return false;
+}
+#endif
+
+static void print_smc_descriptor(const struct smc_descriptor pool[])
+{
+ const struct smc_descriptor *p_smc_desc;
+
+ INFO("print smc descriptor pool\n");
+ for (p_smc_desc = &pool[0];
+ (char *)p_smc_desc < (char *)MTK_SMC_POOL_END_UNALIGNED;
+ p_smc_desc++) {
+ INFO("descriptor name:%s\n", p_smc_desc->smc_name);
+ INFO("descriptor index:%d\n", *p_smc_desc->smc_descriptor_index);
+ INFO("smc id 32:0x%x, smc id 64:0x%x\n",
+ p_smc_desc->smc_id_aarch32, p_smc_desc->smc_id_aarch64);
+ }
+}
+
+static int mtk_smc_handler_init(void)
+{
+ const struct smc_descriptor *iter;
+ short index_cnt;
+ int ret = 0;
+
+ smc_handler_pool = (const struct smc_descriptor *)MTK_SMC_POOL_START;
+ /* Designate descriptor index point to smc_handler_pool */
+ for (index_cnt = 0, iter = &smc_handler_pool[0];
+ (char *)iter < (char *)MTK_SMC_POOL_END_UNALIGNED;
+ iter++, index_cnt++) {
+ if (index_cnt < 0) {
+ SMC_HANDLER_DEBUG("smc handler pool index overflow!\n");
+ ret = -EPERM;
+ assert(0);
+ break;
+ }
+ *(iter->smc_descriptor_index) = index_cnt;
+ }
+ smc_id_descriptor_max = index_cnt;
+ print_smc_descriptor(smc_handler_pool);
+ return ret;
+}
+MTK_EARLY_PLAT_INIT(mtk_smc_handler_init);
+
+/* This function handles Mediatek defined SiP Calls from Bootloader */
+static uintptr_t mtk_smc_handler_bl33(uint32_t smc_id,
+ u_register_t x1,
+ u_register_t x2,
+ u_register_t x3,
+ u_register_t x4,
+ void *cookie,
+ void *handle,
+ u_register_t flags)
+{
+ uintptr_t ret = MTK_SIP_E_SUCCESS;
+ struct smccc_res smc_ret = {0};
+
+ switch (smc_id) {
+ MTK_SIP_SMC_FROM_BL33_TABLE(SMC_ID_EXPAND_AS_SMC_OPERATION);
+ default:
+ INFO("BL33 SMC ID:0x%x not supported\n", smc_id);
+ ret = SMC_UNK;
+ break;
+ }
+ SMC_RET4(handle, ret, smc_ret.a1, smc_ret.a2, smc_ret.a3);
+}
+
+/* This function handles Mediatek defined SiP Calls from Kernel */
+static uintptr_t mtk_smc_handler_nsel1(uint32_t smc_id,
+ u_register_t x1,
+ u_register_t x2,
+ u_register_t x3,
+ u_register_t x4,
+ void *cookie,
+ void *handle,
+ u_register_t flags)
+{
+ uintptr_t ret = MTK_SIP_E_SUCCESS;
+ struct smccc_res smc_ret = {0};
+
+ switch (smc_id) {
+ MTK_SIP_SMC_FROM_NS_EL1_TABLE(SMC_ID_EXPAND_AS_SMC_OPERATION);
+ default:
+ INFO("NSEL1 SMC ID:0x%x not supported\n", smc_id);
+ ret = SMC_UNK;
+ break;
+ }
+ SMC_RET4(handle, ret, smc_ret.a1, smc_ret.a2, smc_ret.a3);
+}
+
+static uintptr_t mtk_smc_handler(uint32_t smc_id,
+ u_register_t x1,
+ u_register_t x2,
+ u_register_t x3,
+ u_register_t x4,
+ void *cookie,
+ void *handle,
+ u_register_t flags)
+{
+ uintptr_t ret = SMC_UNK;
+ uint32_t ns;
+ uint32_t smc_ori;
+ uint32_t smc_num;
+
+ /* Get SMC Originator bit 14.15 */
+ smc_ori = GET_SMC_ORI(smc_id);
+ /* Get SMC Number. Clean bit 14.15 */
+ smc_num = GET_SMC_ORI_NUM(smc_id);
+
+ /* Determine which security state this SMC originated from */
+ ns = is_caller_non_secure(flags);
+
+ if (ns && is_smc_forbidden(smc_ori)) {
+ ERROR("%s: Forbidden SMC call (0x%x)\n", __func__, smc_id);
+ SMC_RET1(handle, ret);
+ }
+
+ if (!ns) {
+ /* SiP SMC service secure world's call */
+ INFO("Secure SMC ID:0x%x not supported\n", smc_id);
+ SMC_RET1(handle, ret);
+ }
+ if (is_from_bl33(smc_ori)) {
+ /* SiP SMC service secure bootloader's call */
+ return mtk_smc_handler_bl33(smc_num, x1, x2, x3, x4,
+ cookie, handle, flags);
+ } else if (is_from_nsel1(smc_ori)) {
+ /* SiP SMC service kernel's call */
+ return mtk_smc_handler_nsel1(smc_num, x1, x2, x3, x4,
+ cookie, handle, flags);
+ }
+ INFO("SMC ID:0x%x not supported\n", smc_id);
+ SMC_RET1(handle, ret);
+}
+
+/* Define a runtime service descriptor for fast SMC calls */
+DECLARE_RT_SVC(
+ mtk_smc_handler,
+ OEN_SIP_START,
+ OEN_SIP_END,
+ SMC_TYPE_FAST,
+ NULL,
+ mtk_smc_handler
+);
diff --git a/plat/mediatek/common/rules.mk b/plat/mediatek/common/rules.mk
new file mode 100644
index 0000000..6acc731
--- /dev/null
+++ b/plat/mediatek/common/rules.mk
@@ -0,0 +1,15 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+LOCAL_DIR := $(call GET_LOCAL_DIR)
+
+MODULE := mtk_common
+
+LOCAL_SRCS-y := ${LOCAL_DIR}/mtk_bl31_setup.c
+LOCAL_SRCS-y += ${LOCAL_DIR}/mtk_smc_handlers.c
+LOCAL_SRCS-$(MTK_SIP_KERNEL_BOOT_ENABLE) += ${LOCAL_DIR}/cold_boot.c
+
+$(eval $(call MAKE_LOCALS,$(LOCAL_SRCS-y),$(MTK_BL)))
diff --git a/plat/mediatek/common/mtk_cirq.c b/plat/mediatek/drivers/cirq/mt_cirq.c
similarity index 98%
rename from plat/mediatek/common/mtk_cirq.c
rename to plat/mediatek/drivers/cirq/mt_cirq.c
index 9cf7144..60534a2 100644
--- a/plat/mediatek/common/mtk_cirq.c
+++ b/plat/mediatek/drivers/cirq/mt_cirq.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -9,8 +9,8 @@
#include <drivers/arm/gic_common.h>
#include <lib/mmio.h>
+#include <mt_cirq.h>
#include <mt_gic_v3.h>
-#include <mtk_cirq.h>
static struct cirq_events cirq_all_events = {
.spi_start = CIRQ_SPI_START,
diff --git a/plat/mediatek/common/mtk_cirq.h b/plat/mediatek/drivers/cirq/mt_cirq.h
similarity index 97%
rename from plat/mediatek/common/mtk_cirq.h
rename to plat/mediatek/drivers/cirq/mt_cirq.h
index 6e63bb8..cb96295 100644
--- a/plat/mediatek/common/mtk_cirq.h
+++ b/plat/mediatek/drivers/cirq/mt_cirq.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/mediatek/drivers/cirq/rules.mk b/plat/mediatek/drivers/cirq/rules.mk
new file mode 100644
index 0000000..710eae0
--- /dev/null
+++ b/plat/mediatek/drivers/cirq/rules.mk
@@ -0,0 +1,14 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+LOCAL_DIR := $(call GET_LOCAL_DIR)
+
+MODULE := cirq
+LOCAL_SRCS-y := $(LOCAL_DIR)/mt_cirq.c
+
+PLAT_INCLUDES += -I${LOCAL_DIR}
+
+$(eval $(call MAKE_MODULE,$(MODULE),$(LOCAL_SRCS-y),$(MTK_BL)))
diff --git a/plat/mediatek/mt8195/drivers/dp/mt_dp.c b/plat/mediatek/drivers/dp/mt_dp.c
similarity index 76%
rename from plat/mediatek/mt8195/drivers/dp/mt_dp.c
rename to plat/mediatek/drivers/dp/mt_dp.c
index 5930cd5..8aa246f 100644
--- a/plat/mediatek/mt8195/drivers/dp/mt_dp.c
+++ b/plat/mediatek/drivers/dp/mt_dp.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -15,7 +15,7 @@
static uint32_t dp_write_sec_reg(uint32_t is_edp, uint32_t offset,
uint32_t value, uint32_t mask)
{
- uint32_t reg = (is_edp != 0U) ? eDP_SEC_BASE : DP_SEC_BASE;
+ uint32_t reg = (is_edp != 0U) ? EDP_SEC_BASE : DP_SEC_BASE;
mmio_clrsetbits_32(reg + offset, mask, value);
@@ -53,7 +53,7 @@
if (ret == MTK_SIP_E_SUCCESS) {
regmsk = (VIDEO_MUTE_SEL_SECURE_FLDMASK |
- VIDEO_MUTE_SW_SECURE_FLDMASK);
+ VIDEO_MUTE_SW_SECURE_FLDMASK);
if (para > 0U) {
fldmask = VIDEO_MUTE_SW_SECURE_FLDMASK;
} else {
@@ -67,3 +67,13 @@
return ret;
}
+
+u_register_t mtk_dp_sip_handler(u_register_t x1, u_register_t x2,
+ u_register_t x3, u_register_t x4,
+ void *handle, struct smccc_res *smccc_ret)
+{
+ uint32_t ret_val;
+
+ return dp_secure_handler(x1, x2, &ret_val);
+}
+DECLARE_SMC_HANDLER(MTK_SIP_DP_CONTROL, mtk_dp_sip_handler);
diff --git a/plat/mediatek/mt8195/drivers/dp/mt_dp.h b/plat/mediatek/drivers/dp/mt_dp.h
similarity index 87%
rename from plat/mediatek/mt8195/drivers/dp/mt_dp.h
rename to plat/mediatek/drivers/dp/mt_dp.h
index 8157598..d5dad29 100644
--- a/plat/mediatek/mt8195/drivers/dp/mt_dp.h
+++ b/plat/mediatek/drivers/dp/mt_dp.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/mediatek/drivers/dp/rules.mk b/plat/mediatek/drivers/dp/rules.mk
new file mode 100644
index 0000000..786d514
--- /dev/null
+++ b/plat/mediatek/drivers/dp/rules.mk
@@ -0,0 +1,14 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+LOCAL_DIR := $(call GET_LOCAL_DIR)
+
+MODULE := dp
+LOCAL_SRCS-y := $(LOCAL_DIR)/mt_dp.c
+
+PLAT_INCLUDES += -I${LOCAL_DIR}
+
+$(eval $(call MAKE_MODULE,$(MODULE),$(LOCAL_SRCS-y),$(MTK_BL)))
diff --git a/plat/mediatek/common/drivers/gic600/mt_gic_v3.c b/plat/mediatek/drivers/gic600/mt_gic_v3.c
similarity index 93%
rename from plat/mediatek/common/drivers/gic600/mt_gic_v3.c
rename to plat/mediatek/drivers/gic600/mt_gic_v3.c
index ae8d697..cca5d0a 100644
--- a/plat/mediatek/common/drivers/gic600/mt_gic_v3.c
+++ b/plat/mediatek/drivers/gic600/mt_gic_v3.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -12,7 +12,7 @@
#include <bl31/interrupt_mgmt.h>
#include <common/bl_common.h>
#include <common/debug.h>
-
+#include <lib/mtk_init/mtk_init.h>
#include <mt_gic_v3.h>
#include <mtk_plat_common.h>
#include <plat/common/platform.h>
@@ -194,3 +194,15 @@
mmio_write_32(BASE_GICD_BASE + GICD_ISPENDR +
irq / 32 * 4, bit);
}
+
+int mt_gic_one_init(void)
+{
+ INFO("[%s] GIC initialization\n", __func__);
+
+ /* Initialize the GIC driver, CPU and distributor interfaces */
+ mt_gic_driver_init();
+ mt_gic_init();
+
+ return 0;
+}
+MTK_PLAT_SETUP_0_INIT(mt_gic_one_init);
diff --git a/plat/mediatek/common/drivers/gic600/mt_gic_v3.h b/plat/mediatek/drivers/gic600/mt_gic_v3.h
similarity index 87%
rename from plat/mediatek/common/drivers/gic600/mt_gic_v3.h
rename to plat/mediatek/drivers/gic600/mt_gic_v3.h
index c4ab44f..31513ef 100644
--- a/plat/mediatek/common/drivers/gic600/mt_gic_v3.h
+++ b/plat/mediatek/drivers/gic600/mt_gic_v3.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -23,5 +23,6 @@
void gic_sgi_restore_all(void);
uint32_t mt_irq_get_pending(uint32_t irq);
void mt_irq_set_pending(uint32_t irq);
+int mt_gic_one_init(void);
#endif /* MT_GIC_V3_H */
diff --git a/plat/mediatek/drivers/gic600/rules.mk b/plat/mediatek/drivers/gic600/rules.mk
new file mode 100644
index 0000000..3070591
--- /dev/null
+++ b/plat/mediatek/drivers/gic600/rules.mk
@@ -0,0 +1,14 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+LOCAL_DIR := $(call GET_LOCAL_DIR)
+
+MODULE := gic600
+LOCAL_SRCS-y := $(LOCAL_DIR)/mt_gic_v3.c
+
+PLAT_INCLUDES += -I${LOCAL_DIR}
+
+$(eval $(call MAKE_MODULE,$(MODULE),$(LOCAL_SRCS-y),$(MTK_BL)))
diff --git a/plat/mediatek/drivers/gpio/mt8188/mtgpio.c b/plat/mediatek/drivers/gpio/mt8188/mtgpio.c
new file mode 100644
index 0000000..9e9fc5d
--- /dev/null
+++ b/plat/mediatek/drivers/gpio/mt8188/mtgpio.c
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <mtgpio.h>
+#include <platform_def.h>
+
+uintptr_t mt_gpio_find_reg_addr(uint32_t pin)
+{
+ uintptr_t reg_addr = 0U;
+ struct mt_pin_info gpio_info;
+
+ assert(pin < MAX_GPIO_PIN);
+
+ gpio_info = mt_pin_infos[pin];
+
+ switch (gpio_info.base & 0x0f) {
+ case 0:
+ reg_addr = IOCFG_RM_BASE;
+ break;
+ case 1:
+ reg_addr = IOCFG_LT_BASE;
+ break;
+ case 2:
+ reg_addr = IOCFG_LM_BASE;
+ break;
+ case 3:
+ reg_addr = IOCFG_RT_BASE;
+ break;
+ default:
+ break;
+ }
+
+ return reg_addr;
+}
diff --git a/plat/mediatek/drivers/gpio/mt8188/mtgpio.h b/plat/mediatek/drivers/gpio/mt8188/mtgpio.h
new file mode 100644
index 0000000..32a4608
--- /dev/null
+++ b/plat/mediatek/drivers/gpio/mt8188/mtgpio.h
@@ -0,0 +1,221 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef MT_GPIO_H
+#define MT_GPIO_H
+
+#include <mtgpio_common.h>
+
+/* Enumeration for GPIO pin */
+typedef enum GPIO_PIN {
+ GPIO_UNSUPPORTED = -1,
+ GPIO0, GPIO1, GPIO2, GPIO3, GPIO4, GPIO5, GPIO6,
+ GPIO7, GPIO8, GPIO9, GPIO10, GPIO11, GPIO12, GPIO13, GPIO14,
+ GPIO15, GPIO16, GPIO17, GPIO18, GPIO19, GPIO20, GPIO21, GPIO22,
+ GPIO23, GPIO24, GPIO25, GPIO26, GPIO27, GPIO28, GPIO29, GPIO30,
+ GPIO31, GPIO32, GPIO33, GPIO34, GPIO35, GPIO36, GPIO37, GPIO38,
+ GPIO39, GPIO40, GPIO41, GPIO42, GPIO43, GPIO44, GPIO45, GPIO46,
+ GPIO47, GPIO48, GPIO49, GPIO50, GPIO51, GPIO52, GPIO53, GPIO54,
+ GPIO55, GPIO56, GPIO57, GPIO58, GPIO59, GPIO60, GPIO61, GPIO62,
+ GPIO63, GPIO64, GPIO65, GPIO66, GPIO67, GPIO68, GPIO69, GPIO70,
+ GPIO71, GPIO72, GPIO73, GPIO74, GPIO75, GPIO76, GPIO77, GPIO78,
+ GPIO79, GPIO80, GPIO81, GPIO82, GPIO83, GPIO84, GPIO85, GPIO86,
+ GPIO87, GPIO88, GPIO89, GPIO90, GPIO91, GPIO92, GPIO93, GPIO94,
+ GPIO95, GPIO96, GPIO97, GPIO98, GPIO99, GPIO100, GPIO101, GPIO102,
+ GPIO103, GPIO104, GPIO105, GPIO106, GPIO107, GPIO108, GPIO109, GPIO110,
+ GPIO111, GPIO112, GPIO113, GPIO114, GPIO115, GPIO116, GPIO117, GPIO118,
+ GPIO119, GPIO120, GPIO121, GPIO122, GPIO123, GPIO124, GPIO125, GPIO126,
+ GPIO127, GPIO128, GPIO129, GPIO130, GPIO131, GPIO132, GPIO133, GPIO134,
+ GPIO135, GPIO136, GPIO137, GPIO138, GPIO139, GPIO140, GPIO141, GPIO142,
+ GPIO143, GPIO144, GPIO145, GPIO146, GPIO147, GPIO148, GPIO149, GPIO150,
+ GPIO151, GPIO152, GPIO153, GPIO154, GPIO155, GPIO156, GPIO157, GPIO158,
+ GPIO159, GPIO160, GPIO161, GPIO162, GPIO163, GPIO164, GPIO165, GPIO166,
+ GPIO167, GPIO168, GPIO169, GPIO170, GPIO171, GPIO172, GPIO173, GPIO174,
+ GPIO175, GPIO176,
+ MT_GPIO_BASE_MAX
+} GPIO_PIN;
+
+static const struct mt_pin_info mt_pin_infos[] = {
+ PIN(0, 0, 6, 0x30, 0xb0),
+ PIN(1, 0, 7, 0x30, 0xb0),
+ PIN(2, 0, 8, 0x30, 0xb0),
+ PIN(3, 0, 9, 0x30, 0xb0),
+ PIN(4, 0, 10, 0x30, 0xb0),
+ PIN(5, 0, 11, 0x30, 0xb0),
+ PIN(6, 0, 12, 0x30, 0xb0),
+ PIN(7, 0, 13, 0x30, 0xb0),
+ PIN(8, 0, 14, 0x30, 0xb0),
+ PIN(9, 0, 15, 0x30, 0xb0),
+ PIN(10, 0, 16, 0x30, 0xb0),
+ PIN(11, 0, 17, 0x30, 0xb0),
+ PIN(12, 0, 12, 0x31, 0xa0),
+ PIN(13, 0, 13, 0x31, 0xa0),
+ PIN(14, 0, 14, 0x31, 0xa0),
+ PIN(15, 0, 15, 0x31, 0xa0),
+ PIN(16, 0, 1, 0x22, 0x50),
+ PIN(17, 0, 2, 0x22, 0x50),
+ PIN(18, 0, 3, 0x23, 0x60),
+ PIN(19, 0, 4, 0x23, 0x60),
+ PIN(20, 0, 5, 0x23, 0x60),
+ PIN(21, 0, 6, 0x23, 0x60),
+ PIN(22, 0, 0, 0x23, 0x60),
+ PIN(23, 0, 1, 0x23, 0x60),
+ PIN(24, 0, 2, 0x23, 0x60),
+ PIN(25, 0, 3, 0x30, 0xb0),
+ PIN(26, 0, 2, 0x30, 0xb0),
+ PIN(27, 0, 5, 0x30, 0xb0),
+ PIN(28, 0, 4, 0x30, 0xb0),
+ PIN(29, 0, 0, 0x30, 0xb0),
+ PIN(30, 0, 1, 0x30, 0xb0),
+ PIN(31, 0, 11, 0x30, 0xc0),
+ PIN(32, 0, 10, 0x30, 0xc0),
+ PIN(33, 0, 13, 0x30, 0xc0),
+ PIN(34, 0, 12, 0x30, 0xc0),
+ PIN(35, 0, 15, 0x30, 0xc0),
+ PIN(36, 0, 14, 0x30, 0xc0),
+ PIN(37, 0, 21, 0x30, 0xb0),
+ PIN(38, 0, 18, 0x30, 0xb0),
+ PIN(39, 0, 19, 0x30, 0xb0),
+ PIN(40, 0, 20, 0x30, 0xb0),
+ PIN(41, 0, 22, 0x30, 0xb0),
+ PIN(42, 1, 12, 0x31, 0xc0),
+ PIN(43, 1, 13, 0x31, 0xc0),
+ PIN(44, 1, 14, 0x31, 0xc0),
+ PIN(45, 1, 15, 0x31, 0xc0),
+ PIN(46, 0, 0, 0x22, 0x50),
+ PIN(47, 0, 25, 0x30, 0xb0),
+ PIN(48, 0, 24, 0x30, 0xb0),
+ PIN(49, 0, 23, 0x30, 0xb0),
+ PIN(50, 0, 5, 0x22, 0x50),
+ PIN(51, 0, 4, 0x22, 0x50),
+ PIN(52, 0, 3, 0x22, 0x50),
+ PIN(53, 0, 6, 0x22, 0x50),
+ PIN(54, 0, 7, 0x22, 0x50),
+ PIN(55, 0, 26, 0x30, 0xb0),
+ PIN(56, 0, 29, 0x30, 0xb0),
+ PIN(57, 0, 6, 0x31, 0xb0),
+ PIN(58, 0, 9, 0x31, 0xb0),
+ PIN(59, 0, 27, 0x30, 0xb0),
+ PIN(60, 0, 30, 0x30, 0xb0),
+ PIN(61, 0, 28, 0x30, 0xb0),
+ PIN(62, 0, 31, 0x30, 0xb0),
+ PIN(63, 0, 7, 0x31, 0xb0),
+ PIN(64, 0, 10, 0x31, 0xb0),
+ PIN(65, 0, 7, 0x23, 0x60),
+ PIN(66, 0, 9, 0x23, 0x60),
+ PIN(67, 0, 8, 0x23, 0x60),
+ PIN(68, 0, 10, 0x23, 0x60),
+ PIN(69, 0, 1, 0x30, 0xc0),
+ PIN(70, 0, 0, 0x30, 0xc0),
+ PIN(71, 0, 5, 0x30, 0xc0),
+ PIN(72, 0, 4, 0x30, 0xc0),
+ PIN(73, 0, 2, 0x30, 0xc0),
+ PIN(74, 0, 3, 0x30, 0xc0),
+ PIN(75, 0, 7, 0x30, 0xc0),
+ PIN(76, 0, 6, 0x30, 0xc0),
+ PIN(77, 0, 9, 0x30, 0xc0),
+ PIN(78, 0, 8, 0x30, 0xc0),
+ PIN(79, 0, 12, 0x23, 0x60),
+ PIN(80, 0, 11, 0x23, 0x60),
+ PIN(81, 0, 14, 0x23, 0x60),
+ PIN(82, 0, 13, 0x23, 0x60),
+ PIN(83, 0, 16, 0x31, 0xb0),
+ PIN(84, 0, 15, 0x31, 0xb0),
+ PIN(85, 0, 17, 0x31, 0xb0),
+ PIN(86, 0, 19, 0x31, 0xb0),
+ PIN(87, 0, 18, 0x31, 0xb0),
+ PIN(88, 0, 20, 0x31, 0xb0),
+ PIN(89, 0, 22, 0x31, 0xb0),
+ PIN(90, 0, 21, 0x31, 0xb0),
+ PIN(91, 0, 23, 0x31, 0xb0),
+ PIN(92, 0, 3, 0x31, 0xb0),
+ PIN(93, 0, 2, 0x31, 0xb0),
+ PIN(94, 0, 5, 0x31, 0xb0),
+ PIN(95, 0, 4, 0x31, 0xb0),
+ PIN(96, 0, 31, 0x31, 0xa0),
+ PIN(97, 0, 0, 0x31, 0xb0),
+ PIN(98, 0, 8, 0x31, 0xb0),
+ PIN(99, 0, 30, 0x31, 0xa0),
+ PIN(100, 0, 1, 0x31, 0xb0),
+ PIN(101, 0, 0, 0x31, 0xa0),
+ PIN(102, 0, 5, 0x31, 0xa0),
+ PIN(103, 0, 3, 0x31, 0xa0),
+ PIN(104, 0, 4, 0x31, 0xa0),
+ PIN(105, 0, 1, 0x31, 0xa0),
+ PIN(106, 0, 2, 0x31, 0xa0),
+ PIN(107, 0, 21, 0x31, 0xa0),
+ PIN(108, 0, 16, 0x31, 0xa0),
+ PIN(109, 0, 22, 0x31, 0xa0),
+ PIN(110, 0, 17, 0x31, 0xa0),
+ PIN(111, 0, 18, 0x31, 0xa0),
+ PIN(112, 0, 19, 0x31, 0xa0),
+ PIN(113, 0, 20, 0x31, 0xa0),
+ PIN(114, 0, 28, 0x31, 0xa0),
+ PIN(115, 0, 23, 0x31, 0xa0),
+ PIN(116, 0, 29, 0x31, 0xa0),
+ PIN(117, 0, 24, 0x31, 0xa0),
+ PIN(118, 0, 25, 0x31, 0xa0),
+ PIN(119, 0, 26, 0x31, 0xa0),
+ PIN(120, 0, 27, 0x31, 0xa0),
+ PIN(121, 0, 8, 0x22, 0x50),
+ PIN(122, 0, 11, 0x22, 0x50),
+ PIN(123, 0, 10, 0x22, 0x50),
+ PIN(124, 0, 9, 0x22, 0x50),
+ PIN(125, 0, 6, 0x31, 0xa0),
+ PIN(126, 0, 7, 0x31, 0xa0),
+ PIN(127, 0, 8, 0x31, 0xa0),
+ PIN(128, 0, 9, 0x31, 0xa0),
+ PIN(129, 0, 10, 0x31, 0xa0),
+ PIN(130, 0, 11, 0x31, 0xa0),
+ PIN(131, 1, 1, 0x30, 0xd0),
+ PIN(132, 1, 2, 0x30, 0xd0),
+ PIN(133, 1, 9, 0x30, 0xd0),
+ PIN(134, 1, 10, 0x30, 0xd0),
+ PIN(135, 1, 11, 0x30, 0xd0),
+ PIN(136, 1, 12, 0x30, 0xd0),
+ PIN(137, 1, 13, 0x30, 0xd0),
+ PIN(138, 1, 14, 0x30, 0xd0),
+ PIN(139, 1, 15, 0x30, 0xd0),
+ PIN(140, 1, 16, 0x30, 0xd0),
+ PIN(141, 1, 3, 0x30, 0xd0),
+ PIN(142, 1, 4, 0x30, 0xd0),
+ PIN(143, 1, 5, 0x30, 0xd0),
+ PIN(144, 1, 6, 0x30, 0xd0),
+ PIN(145, 1, 7, 0x30, 0xd0),
+ PIN(146, 1, 8, 0x30, 0xd0),
+ PIN(147, 1, 18, 0x30, 0xd0),
+ PIN(148, 1, 19, 0x30, 0xd0),
+ PIN(149, 1, 17, 0x30, 0xd0),
+ PIN(150, 1, 0, 0x30, 0xd0),
+ PIN(151, 1, 9, 0x31, 0xc0),
+ PIN(152, 1, 8, 0x31, 0xc0),
+ PIN(153, 1, 7, 0x31, 0xc0),
+ PIN(154, 1, 6, 0x31, 0xc0),
+ PIN(155, 1, 11, 0x31, 0xc0),
+ PIN(156, 1, 1, 0x31, 0xc0),
+ PIN(157, 1, 0, 0x31, 0xc0),
+ PIN(158, 1, 5, 0x31, 0xc0),
+ PIN(159, 1, 4, 0x31, 0xc0),
+ PIN(160, 1, 3, 0x31, 0xc0),
+ PIN(161, 1, 2, 0x31, 0xc0),
+ PIN(162, 1, 10, 0x31, 0xc0),
+ PIN(163, 1, 1, 0x23, 0x70),
+ PIN(164, 1, 0, 0x23, 0x70),
+ PIN(165, 1, 2, 0x23, 0x70),
+ PIN(166, 1, 3, 0x23, 0x70),
+ PIN(167, 1, 4, 0x23, 0x70),
+ PIN(168, 1, 5, 0x23, 0x70),
+ PIN(169, 1, 1, 0x22, 0x60),
+ PIN(170, 1, 0, 0x22, 0x60),
+ PIN(171, 1, 2, 0x22, 0x60),
+ PIN(172, 1, 3, 0x22, 0x60),
+ PIN(173, 1, 4, 0x22, 0x60),
+ PIN(174, 1, 5, 0x22, 0x60),
+ PIN(175, 0, 11, 0x31, 0xb0),
+ PIN(176, 0, 12, 0x31, 0xb0),
+};
+
+#endif /* MT_GPIO_H */
diff --git a/plat/mediatek/common/drivers/gpio/mtgpio_common.c b/plat/mediatek/drivers/gpio/mtgpio_common.c
similarity index 97%
rename from plat/mediatek/common/drivers/gpio/mtgpio_common.c
rename to plat/mediatek/drivers/gpio/mtgpio_common.c
index 89977a5..bad0190 100644
--- a/plat/mediatek/common/drivers/gpio/mtgpio_common.c
+++ b/plat/mediatek/drivers/gpio/mtgpio_common.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -9,6 +9,7 @@
#include <drivers/delay_timer.h>
#include <drivers/gpio.h>
#include <lib/mmio.h>
+#include <lib/mtk_init/mtk_init.h>
#include <mtgpio.h>
#include <platform_def.h>
@@ -292,7 +293,10 @@
.get_pull = mt_get_gpio_pull,
};
-void mt_gpio_init(void)
+int mt_gpio_init(void)
{
gpio_init(&mtgpio_ops);
+
+ return 0;
}
+MTK_PLAT_SETUP_0_INIT(mt_gpio_init);
diff --git a/plat/mediatek/common/drivers/gpio/mtgpio_common.h b/plat/mediatek/drivers/gpio/mtgpio_common.h
similarity index 95%
rename from plat/mediatek/common/drivers/gpio/mtgpio_common.h
rename to plat/mediatek/drivers/gpio/mtgpio_common.h
index bf51055..d6b858c 100644
--- a/plat/mediatek/common/drivers/gpio/mtgpio_common.h
+++ b/plat/mediatek/drivers/gpio/mtgpio_common.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -104,6 +104,6 @@
uint16_t offset;
};
-void mt_gpio_init(void);
+int mt_gpio_init(void);
uintptr_t mt_gpio_find_reg_addr(uint32_t pin);
#endif /* MT_GPIO_COMMON_H */
diff --git a/plat/mediatek/drivers/gpio/rules.mk b/plat/mediatek/drivers/gpio/rules.mk
new file mode 100644
index 0000000..78061a8
--- /dev/null
+++ b/plat/mediatek/drivers/gpio/rules.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+LOCAL_DIR := $(call GET_LOCAL_DIR)
+
+MODULE := gpio
+
+LOCAL_SRCS-y := drivers/gpio/gpio.c
+LOCAL_SRCS-y += ${LOCAL_DIR}/mtgpio_common.c
+LOCAL_SRCS-y += ${LOCAL_DIR}/${MTK_SOC}/mtgpio.c
+
+PLAT_INCLUDES += -I${LOCAL_DIR}
+PLAT_INCLUDES += -I${LOCAL_DIR}/${MTK_SOC}
+
+$(eval $(call MAKE_MODULE,$(MODULE),$(LOCAL_SRCS-y),$(MTK_BL)))
diff --git a/plat/mediatek/drivers/iommu/mt8188/mtk_iommu_plat.c b/plat/mediatek/drivers/iommu/mt8188/mtk_iommu_plat.c
new file mode 100644
index 0000000..1d6863f
--- /dev/null
+++ b/plat/mediatek/drivers/iommu/mt8188/mtk_iommu_plat.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <mtk_iommu_plat.h>
+#include <mtk_mmap_pool.h>
+#include <platform_def.h>
+
+/* mm iommu */
+#define SMI_L0_ID (0)
+#define SMI_L1_ID (1)
+#define SMI_L2_ID (2)
+#define SMI_L3_ID (3)
+#define SMI_L4_ID (4)
+#define SMI_L5_ID (5)
+#define SMI_L6_ID (6)
+#define SMI_L7_ID (7)
+#define SMI_L9_ID (8)
+#define SMI_L10_ID (9)
+#define SMI_L11A_ID (10)
+#define SMI_L11B_ID (11)
+#define SMI_L11C_ID (12)
+#define SMI_L12_ID (13)
+#define SMI_L13_ID (14)
+#define SMI_L14_ID (15)
+#define SMI_L15_ID (16)
+#define SMI_L16A_ID (17)
+#define SMI_L16B_ID (18)
+#define SMI_L17A_ID (19)
+#define SMI_L17B_ID (20)
+#define SMI_L19_ID (21)
+#define SMI_L21_ID (22)
+#define SMI_L23_ID (23)
+#define SMI_L27_ID (24)
+#define SMI_L28_ID (25)
+
+/* infra iommu */
+#define PERI_MST_PROT (0x710)
+#define PERICFG_AO_IOMMU_1 (0x714)
+#define MMU_DEV_PCIE_0 (0)
+#define IFR_CFG_GROUP_NUM (1)
+
+static struct mtk_smi_larb_config mt8188_larb_cfg[SMI_LARB_NUM] = {
+ [SMI_L0_ID] = LARB_CFG_ENTRY(SMI_LARB_0_BASE, 7, 0),
+ [SMI_L1_ID] = LARB_CFG_ENTRY(SMI_LARB_1_BASE, 7, 0),
+ [SMI_L2_ID] = LARB_CFG_ENTRY(SMI_LARB_2_BASE, 5, 0),
+ [SMI_L3_ID] = LARB_CFG_ENTRY(SMI_LARB_3_BASE, 7, 0),
+ [SMI_L4_ID] = LARB_CFG_ENTRY(SMI_LARB_4_BASE, 7, 0),
+ [SMI_L5_ID] = LARB_CFG_ENTRY(SMI_LARB_5_BASE, 8, 0),
+ [SMI_L6_ID] = LARB_CFG_ENTRY(SMI_LARB_6_BASE, 4, 0),
+ [SMI_L7_ID] = LARB_CFG_ENTRY(SMI_LARB_7_BASE, 3, 0),
+ [SMI_L9_ID] = LARB_CFG_ENTRY(SMI_LARB_9_BASE, 25, 0),
+ [SMI_L10_ID] = LARB_CFG_ENTRY(SMI_LARB_10_BASE, 20, 0),
+ [SMI_L11A_ID] = LARB_CFG_ENTRY(SMI_LARB_11A_BASE, 30, 0),
+ [SMI_L11B_ID] = LARB_CFG_ENTRY(SMI_LARB_11B_BASE, 30, 0),
+ [SMI_L11C_ID] = LARB_CFG_ENTRY(SMI_LARB_11C_BASE, 30, 0),
+ [SMI_L12_ID] = LARB_CFG_ENTRY(SMI_LARB_12_BASE, 16, 0),
+ [SMI_L13_ID] = LARB_CFG_ENTRY(SMI_LARB_13_BASE, 24, 0),
+ [SMI_L14_ID] = LARB_CFG_ENTRY(SMI_LARB_14_BASE, 23, 0),
+ [SMI_L15_ID] = LARB_CFG_ENTRY(SMI_LARB_15_BASE, 19, 0),
+ [SMI_L16A_ID] = LARB_CFG_ENTRY(SMI_LARB_16A_BASE, 17, 0),
+ [SMI_L16B_ID] = LARB_CFG_ENTRY(SMI_LARB_16B_BASE, 17, 0),
+ [SMI_L17A_ID] = LARB_CFG_ENTRY(SMI_LARB_17A_BASE, 7, 0),
+ [SMI_L17B_ID] = LARB_CFG_ENTRY(SMI_LARB_17B_BASE, 7, 0),
+ /* venc nbm ports (5/6/11/15/16/17) to sram */
+ [SMI_L19_ID] = LARB_CFG_ENTRY_WITH_PATH(SMI_LARB_19_BASE, 27, 0, 0x38860),
+ [SMI_L21_ID] = LARB_CFG_ENTRY(SMI_LARB_21_BASE, 11, 0),
+ [SMI_L23_ID] = LARB_CFG_ENTRY(SMI_LARB_23_BASE, 9, 0),
+ [SMI_L27_ID] = LARB_CFG_ENTRY(SMI_LARB_27_BASE, 4, 0),
+ [SMI_L28_ID] = LARB_CFG_ENTRY(SMI_LARB_28_BASE, 0, 0),
+};
+
+static bool is_protected;
+
+static uint32_t mt8188_ifr_mst_cfg_base[IFR_CFG_GROUP_NUM] = {
+ PERICFG_AO_BASE,
+};
+static uint32_t mt8188_ifr_mst_cfg_offs[IFR_CFG_GROUP_NUM] = {
+ PERICFG_AO_IOMMU_1,
+};
+static struct mtk_ifr_mst_config mt8188_ifr_mst_cfg[MMU_DEV_NUM] = {
+ [MMU_DEV_PCIE_0] = IFR_MST_CFG_ENTRY(0, 18),
+};
+
+struct mtk_smi_larb_config *g_larb_cfg = &mt8188_larb_cfg[0];
+struct mtk_ifr_mst_config *g_ifr_mst_cfg = &mt8188_ifr_mst_cfg[0];
+uint32_t *g_ifr_mst_cfg_base = &mt8188_ifr_mst_cfg_base[0];
+uint32_t *g_ifr_mst_cfg_offs = &mt8188_ifr_mst_cfg_offs[0];
+
+/* Protect infra iommu enable setting registers as secure access. */
+void mtk_infra_iommu_enable_protect(void)
+{
+ if (!is_protected) {
+ mmio_write_32(PERICFG_AO_BASE + PERI_MST_PROT, 0xffffffff);
+ is_protected = true;
+ }
+}
diff --git a/plat/mediatek/drivers/iommu/mt8188/mtk_iommu_plat.h b/plat/mediatek/drivers/iommu/mt8188/mtk_iommu_plat.h
new file mode 100644
index 0000000..a59e0c7
--- /dev/null
+++ b/plat/mediatek/drivers/iommu/mt8188/mtk_iommu_plat.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef IOMMU_PLAT_H
+#define IOMMU_PLAT_H
+
+#include <mtk_iommu_priv.h>
+
+/* mm iommu */
+#define SMI_LARB_NUM (26)
+extern struct mtk_smi_larb_config *g_larb_cfg;
+
+/* infra iommu */
+#define MMU_DEV_NUM (1)
+extern struct mtk_ifr_mst_config *g_ifr_mst_cfg;
+extern uint32_t *g_ifr_mst_cfg_base;
+extern uint32_t *g_ifr_mst_cfg_offs;
+
+extern void mtk_infra_iommu_enable_protect(void);
+
+#endif /* IOMMU_PLAT_H */
diff --git a/plat/mediatek/drivers/iommu/mtk_iommu_priv.h b/plat/mediatek/drivers/iommu/mtk_iommu_priv.h
new file mode 100644
index 0000000..3404d31
--- /dev/null
+++ b/plat/mediatek/drivers/iommu/mtk_iommu_priv.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef IOMMU_PRIV_H
+#define IOMMU_PRIV_H
+
+#include <common/debug.h>
+#include <lib/mmio.h>
+#include <mtk_sip_svc.h>
+
+#define LARB_CFG_ENTRY(bs, p_nr, dom) \
+ { .base = (bs), .port_nr = (p_nr), \
+ .dom_id = (dom), .to_sram = 0, }
+
+#define LARB_CFG_ENTRY_WITH_PATH(bs, p_nr, dom, sram) \
+ { .base = (bs), .port_nr = (p_nr), \
+ .dom_id = (dom), .to_sram = (sram), }
+
+#define IFR_MST_CFG_ENTRY(idx, bit) \
+ { .cfg_addr_idx = (idx), .r_mmu_en_bit = (bit), }
+
+enum IOMMU_ATF_CMD {
+ IOMMU_ATF_CMD_CONFIG_SMI_LARB, /* For mm master to enable iommu */
+ IOMMU_ATF_CMD_CONFIG_INFRA_IOMMU, /* For infra master to enable iommu */
+ IOMMU_ATF_CMD_COUNT,
+};
+
+struct mtk_smi_larb_config {
+ uint32_t base;
+ uint32_t port_nr;
+ uint32_t dom_id;
+ uint32_t to_sram;
+ uint32_t sec_en_msk;
+};
+
+struct mtk_ifr_mst_config {
+ uint8_t cfg_addr_idx;
+ uint8_t r_mmu_en_bit;
+};
+
+#endif /* IOMMU_PRIV_H */
diff --git a/plat/mediatek/drivers/iommu/mtk_iommu_smc.c b/plat/mediatek/drivers/iommu/mtk_iommu_smc.c
new file mode 100644
index 0000000..9762d0b
--- /dev/null
+++ b/plat/mediatek/drivers/iommu/mtk_iommu_smc.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stddef.h>
+#include <mtk_iommu_plat.h>
+
+/* defination */
+/* smi larb */
+#define SMI_LARB_NON_SEC_CON(port) (0x380 + ((port) << 2))
+#define PATH_SEL_MASK (0xf0000) /* to sram (INT) */
+#define SMI_LARB_SEC_CON_INT(port) (0xf00 + ((port) << 2))
+#define SMI_LARB_SEC_CON(port) (0xf80 + ((port) << 2))
+#define MMU_MASK BIT(0)
+#define MMU_EN(en) ((!!(en)) << 0)
+#define SEC_MASK BIT(1)
+#define SEC_EN(en) ((!!(en)) << 1)
+#define DOMAIN_MASK (0x1f << 4)
+#define SMI_MMU_EN(port) (0x1 << (port))
+
+/* infra master */
+#define IFR_CFG_MMU_EN_MSK(r_bit) (0x3 << (r_bit))
+
+/* smi larb configure */
+/*
+ * If multimedia security config is enabled, the SMI config register must be
+ * configurated in security world.
+ * And the SRAM path is also configurated here to enhance security.
+ */
+static void mtk_smi_larb_port_config_to_sram(
+ const struct mtk_smi_larb_config *larb,
+ uint32_t port_id)
+{
+ mmio_clrbits_32(larb->base + SMI_LARB_SEC_CON_INT(port_id),
+ MMU_MASK | SEC_MASK | DOMAIN_MASK);
+
+ mmio_setbits_32(larb->base + SMI_LARB_NON_SEC_CON(port_id),
+ PATH_SEL_MASK);
+}
+
+static void mtk_smi_port_config(const struct mtk_smi_larb_config *larb,
+ uint32_t port_id, uint8_t mmu_en, uint8_t sec_en)
+{
+ mmio_clrsetbits_32(larb->base + SMI_LARB_SEC_CON(port_id),
+ MMU_MASK | SEC_MASK | DOMAIN_MASK,
+ MMU_EN(mmu_en) | SEC_EN(sec_en));
+}
+
+static int mtk_smi_larb_port_config_sec(uint32_t larb_id, uint32_t mmu_en_msk)
+{
+ uint32_t port_id, port_nr;
+ const struct mtk_smi_larb_config *larb;
+ uint32_t to_sram;
+ uint8_t mmu_en;
+
+ if (larb_id >= SMI_LARB_NUM) {
+ return MTK_SIP_E_INVALID_PARAM;
+ }
+
+ larb = &g_larb_cfg[larb_id];
+ port_nr = larb->port_nr;
+ to_sram = larb->to_sram;
+
+ for (port_id = 0; port_id < port_nr; port_id++) {
+ if ((to_sram & BIT(port_id)) > 0U) {
+ mtk_smi_larb_port_config_to_sram(larb, port_id);
+ continue;
+ }
+ mmu_en = !!(mmu_en_msk & SMI_MMU_EN(port_id));
+ mtk_smi_port_config(larb, port_id, mmu_en, 0);
+ }
+
+ return MTK_SIP_E_SUCCESS;
+}
+
+static int mtk_infra_master_config_sec(uint32_t dev_id, uint32_t enable)
+{
+ const struct mtk_ifr_mst_config *ifr_cfg;
+ uint32_t reg_addr;
+
+ mtk_infra_iommu_enable_protect();
+
+ if (dev_id >= MMU_DEV_NUM) {
+ return MTK_SIP_E_NOT_SUPPORTED;
+ }
+
+ ifr_cfg = &g_ifr_mst_cfg[dev_id];
+ reg_addr = g_ifr_mst_cfg_base[(ifr_cfg->cfg_addr_idx)] +
+ g_ifr_mst_cfg_offs[(ifr_cfg->cfg_addr_idx)];
+
+ if (enable > 0U) {
+ mmio_setbits_32(reg_addr, IFR_CFG_MMU_EN_MSK(ifr_cfg->r_mmu_en_bit));
+ } else {
+ mmio_clrbits_32(reg_addr, IFR_CFG_MMU_EN_MSK(ifr_cfg->r_mmu_en_bit));
+ }
+
+ return MTK_SIP_E_SUCCESS;
+}
+
+static u_register_t mtk_iommu_handler(u_register_t x1, u_register_t x2,
+ u_register_t x3, u_register_t x4,
+ void *handle, struct smccc_res *smccc_ret)
+{
+ uint32_t cmd_id = x1, mdl_id = x2, val = x3;
+ int ret = MTK_SIP_E_NOT_SUPPORTED;
+
+ (void)x4;
+ (void)handle;
+
+ switch (cmd_id) {
+ case IOMMU_ATF_CMD_CONFIG_SMI_LARB:
+ ret = mtk_smi_larb_port_config_sec(mdl_id, val);
+ break;
+ case IOMMU_ATF_CMD_CONFIG_INFRA_IOMMU:
+ ret = mtk_infra_master_config_sec(mdl_id, val);
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+DECLARE_SMC_HANDLER(MTK_SIP_IOMMU_CONTROL, mtk_iommu_handler);
diff --git a/plat/mediatek/drivers/iommu/rules.mk b/plat/mediatek/drivers/iommu/rules.mk
new file mode 100644
index 0000000..5490f41
--- /dev/null
+++ b/plat/mediatek/drivers/iommu/rules.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+LOCAL_DIR := $(call GET_LOCAL_DIR)
+
+MODULE := mtk_iommu
+
+LOCAL_SRCS-y := ${LOCAL_DIR}/mtk_iommu_smc.c
+LOCAL_SRCS-y += ${LOCAL_DIR}/${MTK_SOC}/mtk_iommu_plat.c
+
+PLAT_INCLUDES += -I${LOCAL_DIR}
+PLAT_INCLUDES += -I${LOCAL_DIR}/${MTK_SOC}
+
+$(eval $(call MAKE_MODULE,$(MODULE),$(LOCAL_SRCS-y),$(MTK_BL)))
diff --git a/plat/mediatek/common/lpm/mt_lp_rm.c b/plat/mediatek/drivers/lpm/mt_lp_rm.c
similarity index 96%
rename from plat/mediatek/common/lpm/mt_lp_rm.c
rename to plat/mediatek/drivers/lpm/mt_lp_rm.c
index f3148fe..0bafc66 100644
--- a/plat/mediatek/common/lpm/mt_lp_rm.c
+++ b/plat/mediatek/drivers/lpm/mt_lp_rm.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/mediatek/common/lpm/mt_lp_rm.h b/plat/mediatek/drivers/lpm/mt_lp_rm.h
similarity index 94%
rename from plat/mediatek/common/lpm/mt_lp_rm.h
rename to plat/mediatek/drivers/lpm/mt_lp_rm.h
index 39759f1..e93dac3 100644
--- a/plat/mediatek/common/lpm/mt_lp_rm.h
+++ b/plat/mediatek/drivers/lpm/mt_lp_rm.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/mediatek/mt8192/drivers/pmic/pmic.c b/plat/mediatek/drivers/pmic/pmic.c
similarity index 73%
rename from plat/mediatek/mt8192/drivers/pmic/pmic.c
rename to plat/mediatek/drivers/pmic/pmic.c
index cca4413..a11ad9a 100644
--- a/plat/mediatek/mt8192/drivers/pmic/pmic.c
+++ b/plat/mediatek/drivers/pmic/pmic.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/mediatek/mt8192/drivers/pmic/pmic.h b/plat/mediatek/drivers/pmic/pmic.h
similarity index 63%
rename from plat/mediatek/mt8192/drivers/pmic/pmic.h
rename to plat/mediatek/drivers/pmic/pmic.h
index aac22af..6c10f65 100644
--- a/plat/mediatek/mt8192/drivers/pmic/pmic.h
+++ b/plat/mediatek/drivers/pmic/pmic.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -7,7 +7,7 @@
#ifndef PMIC_H
#define PMIC_H
-#define PMIC_PWRHOLD 0xa08
+#define PMIC_PWRHOLD (0xa08)
/* external API */
void pmic_power_off(void);
diff --git a/plat/mediatek/drivers/pmic/rules.mk b/plat/mediatek/drivers/pmic/rules.mk
new file mode 100644
index 0000000..e408b03
--- /dev/null
+++ b/plat/mediatek/drivers/pmic/rules.mk
@@ -0,0 +1,15 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+LOCAL_DIR := $(call GET_LOCAL_DIR)
+
+MODULE := pmic
+
+LOCAL_SRCS-y += ${LOCAL_DIR}/pmic.c
+
+PLAT_INCLUDES += -I${LOCAL_DIR}/
+
+$(eval $(call MAKE_MODULE,$(MODULE),$(LOCAL_SRCS-y),$(MTK_BL)))
diff --git a/plat/mediatek/drivers/pmic_wrap/mt8188/pmic_wrap_init.h b/plat/mediatek/drivers/pmic_wrap/mt8188/pmic_wrap_init.h
new file mode 100644
index 0000000..9027daf
--- /dev/null
+++ b/plat/mediatek/drivers/pmic_wrap/mt8188/pmic_wrap_init.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PMIC_WRAP_INIT_H
+#define PMIC_WRAP_INIT_H
+
+#include <stdint.h>
+
+#include "platform_def.h"
+#include <pmic_wrap_init_common.h>
+
+static struct mt8188_pmic_wrap_regs *const mtk_pwrap = (void *)PMIC_WRAP_BASE;
+
+/* PMIC_WRAP registers */
+struct mt8188_pmic_wrap_regs {
+ uint32_t init_done;
+ uint32_t reserved[543];
+ uint32_t wacs2_cmd;
+ uint32_t wacs2_wdata;
+ uint32_t reserved1[3];
+ uint32_t wacs2_rdata;
+ uint32_t reserved2[3];
+ uint32_t wacs2_vldclr;
+ uint32_t wacs2_sta;
+};
+
+#endif /* PMIC_WRAP_INIT_H */
diff --git a/plat/mediatek/common/drivers/pmic_wrap/pmic_wrap_init.c b/plat/mediatek/drivers/pmic_wrap/pmic_wrap_init.c
similarity index 98%
rename from plat/mediatek/common/drivers/pmic_wrap/pmic_wrap_init.c
rename to plat/mediatek/drivers/pmic_wrap/pmic_wrap_init.c
index e3cfd46..0ee1c64 100644
--- a/plat/mediatek/common/drivers/pmic_wrap/pmic_wrap_init.c
+++ b/plat/mediatek/drivers/pmic_wrap/pmic_wrap_init.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2019, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2019-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/mediatek/drivers/pmic_wrap/pmic_wrap_init_common.h b/plat/mediatek/drivers/pmic_wrap/pmic_wrap_init_common.h
new file mode 100644
index 0000000..4ba1f5c
--- /dev/null
+++ b/plat/mediatek/drivers/pmic_wrap/pmic_wrap_init_common.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PMIC_WRAP_INIT_COMMON_H
+#define PMIC_WRAP_INIT_COMMON_H
+
+#include <stdint.h>
+
+#include "platform_def.h"
+
+/* external API */
+int32_t pwrap_read(uint32_t adr, uint32_t *rdata);
+int32_t pwrap_write(uint32_t adr, uint32_t wdata);
+
+#define GET_WACS_FSM(x) ((x >> 1) & 0x7)
+
+/* macro for SWINF_FSM */
+#define SWINF_FSM_IDLE (0x00)
+#define SWINF_FSM_REQ (0x02)
+#define SWINF_FSM_WFDLE (0x04)
+#define SWINF_FSM_WFVLDCLR (0x06)
+#define SWINF_INIT_DONE (0x01)
+
+/* timeout setting */
+#define PWRAP_READ_US (1000)
+#define PWRAP_WAIT_IDLE_US (1000)
+
+/* error information flag */
+enum pwrap_errno {
+ E_PWR_INVALID_ARG = 1,
+ E_PWR_INVALID_RW = 2,
+ E_PWR_INVALID_ADDR = 3,
+ E_PWR_INVALID_WDAT = 4,
+ E_PWR_INVALID_OP_MANUAL = 5,
+ E_PWR_NOT_IDLE_STATE = 6,
+ E_PWR_NOT_INIT_DONE = 7,
+ E_PWR_NOT_INIT_DONE_READ = 8,
+ E_PWR_WAIT_IDLE_TIMEOUT = 9,
+ E_PWR_WAIT_IDLE_TIMEOUT_READ = 10,
+ E_PWR_INIT_SIDLY_FAIL = 11,
+ E_PWR_RESET_TIMEOUT = 12,
+ E_PWR_TIMEOUT = 13,
+ E_PWR_INIT_RESET_SPI = 20,
+ E_PWR_INIT_SIDLY = 21,
+ E_PWR_INIT_REG_CLOCK = 22,
+ E_PWR_INIT_ENABLE_PMIC = 23,
+ E_PWR_INIT_DIO = 24,
+ E_PWR_INIT_CIPHER = 25,
+ E_PWR_INIT_WRITE_TEST = 26,
+ E_PWR_INIT_ENABLE_CRC = 27,
+ E_PWR_INIT_ENABLE_DEWRAP = 28,
+ E_PWR_INIT_ENABLE_EVENT = 29,
+ E_PWR_READ_TEST_FAIL = 30,
+ E_PWR_WRITE_TEST_FAIL = 31,
+ E_PWR_SWITCH_DIO = 32,
+};
+
+#endif /* PMIC_WRAP_INIT_COMMON_H */
diff --git a/plat/mediatek/common/drivers/pmic_wrap/pmic_wrap_init_v2.c b/plat/mediatek/drivers/pmic_wrap/pmic_wrap_init_v2.c
similarity index 97%
rename from plat/mediatek/common/drivers/pmic_wrap/pmic_wrap_init_v2.c
rename to plat/mediatek/drivers/pmic_wrap/pmic_wrap_init_v2.c
index d9a79c4..80f55de 100644
--- a/plat/mediatek/common/drivers/pmic_wrap/pmic_wrap_init_v2.c
+++ b/plat/mediatek/drivers/pmic_wrap/pmic_wrap_init_v2.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/mediatek/drivers/pmic_wrap/rules.mk b/plat/mediatek/drivers/pmic_wrap/rules.mk
new file mode 100644
index 0000000..9ba44a6
--- /dev/null
+++ b/plat/mediatek/drivers/pmic_wrap/rules.mk
@@ -0,0 +1,20 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+LOCAL_DIR := $(call GET_LOCAL_DIR)
+
+MODULE := pmic_wrap
+
+ifeq (${USE_PMIC_WRAP_INIT_V2}, 1)
+LOCAL_SRCS-y += ${LOCAL_DIR}/pmic_wrap_init_v2.c
+else
+LOCAL_SRCS-y += ${LOCAL_DIR}/pmic_wrap_init.c
+endif
+
+PLAT_INCLUDES += -I${LOCAL_DIR}/
+PLAT_INCLUDES += -I${LOCAL_DIR}/${MTK_SOC}
+
+$(eval $(call MAKE_MODULE,$(MODULE),$(LOCAL_SRCS-y),$(MTK_BL)))
diff --git a/plat/mediatek/drivers/rtc/mt8188/rtc.h b/plat/mediatek/drivers/rtc/mt8188/rtc.h
new file mode 100644
index 0000000..734e89f
--- /dev/null
+++ b/plat/mediatek/drivers/rtc/mt8188/rtc.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef RTC_H
+#define RTC_H
+
+#include <rtc_mt6359p.h>
+
+#endif /* RTC_H */
diff --git a/plat/mediatek/common/drivers/rtc/rtc_common.c b/plat/mediatek/drivers/rtc/rtc_common.c
similarity index 94%
rename from plat/mediatek/common/drivers/rtc/rtc_common.c
rename to plat/mediatek/drivers/rtc/rtc_common.c
index cad12a0..4efddff 100644
--- a/plat/mediatek/common/drivers/rtc/rtc_common.c
+++ b/plat/mediatek/drivers/rtc/rtc_common.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2019, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2019-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/mediatek/common/drivers/rtc/rtc_mt6359p.c b/plat/mediatek/drivers/rtc/rtc_mt6359p.c
similarity index 97%
rename from plat/mediatek/common/drivers/rtc/rtc_mt6359p.c
rename to plat/mediatek/drivers/rtc/rtc_mt6359p.c
index 124bc8f..3bf4337 100644
--- a/plat/mediatek/common/drivers/rtc/rtc_mt6359p.c
+++ b/plat/mediatek/drivers/rtc/rtc_mt6359p.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/mediatek/common/drivers/rtc/rtc_mt6359p.h b/plat/mediatek/drivers/rtc/rtc_mt6359p.h
similarity index 98%
rename from plat/mediatek/common/drivers/rtc/rtc_mt6359p.h
rename to plat/mediatek/drivers/rtc/rtc_mt6359p.h
index 04726e3..199f152 100644
--- a/plat/mediatek/common/drivers/rtc/rtc_mt6359p.h
+++ b/plat/mediatek/drivers/rtc/rtc_mt6359p.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/mediatek/drivers/rtc/rules.mk b/plat/mediatek/drivers/rtc/rules.mk
new file mode 100644
index 0000000..2398f8a
--- /dev/null
+++ b/plat/mediatek/drivers/rtc/rules.mk
@@ -0,0 +1,20 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+LOCAL_DIR := $(call GET_LOCAL_DIR)
+
+MODULE := rtc
+
+LOCAL_SRCS-y := ${LOCAL_DIR}/rtc_common.c
+
+ifeq (${USE_RTC_MT6359P}, 1)
+LOCAL_SRCS-y += ${LOCAL_DIR}/rtc_mt6359p.c
+PLAT_INCLUDES += -I${LOCAL_DIR}
+endif
+
+PLAT_INCLUDES += -I${LOCAL_DIR}/${MTK_SOC}
+
+$(eval $(call MAKE_MODULE,$(MODULE),$(LOCAL_SRCS-y),$(MTK_BL)))
diff --git a/plat/mediatek/common/drivers/timer/mt_timer.c b/plat/mediatek/drivers/timer/mt_timer.c
similarity index 72%
rename from plat/mediatek/common/drivers/timer/mt_timer.c
rename to plat/mediatek/drivers/timer/mt_timer.c
index 0860885..11e4572 100644
--- a/plat/mediatek/common/drivers/timer/mt_timer.c
+++ b/plat/mediatek/drivers/timer/mt_timer.c
@@ -1,15 +1,16 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch_helpers.h>
+#include <common/debug.h>
#include <lib/mmio.h>
+#include <lib/mtk_init/mtk_init.h>
#include <mt_timer.h>
#include <platform_def.h>
-
uint64_t normal_time_base;
uint64_t atf_time_base;
@@ -30,9 +31,14 @@
return cval;
}
-void mt_systimer_init(void)
+int mt_systimer_init(void)
{
+ INFO("[%s] systimer initialization\n", __func__);
+
/* Enable access in NS mode */
mmio_write_32(CNTWACR_REG, CNT_WRITE_ACCESS_CTL_MASK);
mmio_write_32(CNTRACR_REG, CNT_READ_ACCESS_CTL_MASK);
+
+ return 0;
}
+MTK_PLAT_SETUP_0_INIT(mt_systimer_init);
diff --git a/plat/mediatek/common/drivers/timer/mt_timer.h b/plat/mediatek/drivers/timer/mt_timer.h
similarity index 91%
rename from plat/mediatek/common/drivers/timer/mt_timer.h
rename to plat/mediatek/drivers/timer/mt_timer.h
index b353177..1c08f90 100644
--- a/plat/mediatek/common/drivers/timer/mt_timer.h
+++ b/plat/mediatek/drivers/timer/mt_timer.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -30,6 +30,6 @@
void sched_clock_init(uint64_t normal_base, uint64_t atf_base);
uint64_t sched_clock(void);
-void mt_systimer_init(void);
+int mt_systimer_init(void);
#endif /* MT_TIMER_H */
diff --git a/plat/mediatek/drivers/timer/rules.mk b/plat/mediatek/drivers/timer/rules.mk
new file mode 100644
index 0000000..005cf45
--- /dev/null
+++ b/plat/mediatek/drivers/timer/rules.mk
@@ -0,0 +1,14 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+LOCAL_DIR := $(call GET_LOCAL_DIR)
+
+MODULE := timer
+LOCAL_SRCS-y := $(LOCAL_DIR)/mt_timer.c
+
+PLAT_INCLUDES += -I${LOCAL_DIR}
+
+$(eval $(call MAKE_MODULE,$(MODULE),$(LOCAL_SRCS-y),$(MTK_BL)))
diff --git a/plat/mediatek/common/drivers/uart/8250_console.S b/plat/mediatek/drivers/uart/8250_console.S
similarity index 98%
rename from plat/mediatek/common/drivers/uart/8250_console.S
rename to plat/mediatek/drivers/uart/8250_console.S
index 7a946f9..66f998d 100644
--- a/plat/mediatek/common/drivers/uart/8250_console.S
+++ b/plat/mediatek/drivers/uart/8250_console.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/mediatek/common/drivers/uart/uart.c b/plat/mediatek/drivers/uart/uart.c
similarity index 97%
rename from plat/mediatek/common/drivers/uart/uart.c
rename to plat/mediatek/drivers/uart/uart.c
index b940eb3..fdaa793 100644
--- a/plat/mediatek/common/drivers/uart/uart.c
+++ b/plat/mediatek/drivers/uart/uart.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/mediatek/common/drivers/uart/uart.h b/plat/mediatek/drivers/uart/uart.h
similarity index 97%
rename from plat/mediatek/common/drivers/uart/uart.h
rename to plat/mediatek/drivers/uart/uart.h
index ac8b94d..2ca74fa 100644
--- a/plat/mediatek/common/drivers/uart/uart.h
+++ b/plat/mediatek/drivers/uart/uart.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/mediatek/common/drivers/uart/uart8250.h b/plat/mediatek/drivers/uart/uart8250.h
similarity index 93%
rename from plat/mediatek/common/drivers/uart/uart8250.h
rename to plat/mediatek/drivers/uart/uart8250.h
index da7c7a1..f0541d6 100644
--- a/plat/mediatek/common/drivers/uart/uart8250.h
+++ b/plat/mediatek/drivers/uart/uart8250.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
diff --git a/plat/mediatek/include/cold_boot.h b/plat/mediatek/include/cold_boot.h
new file mode 100644
index 0000000..6b94b57
--- /dev/null
+++ b/plat/mediatek/include/cold_boot.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2022, Mediatek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef COLD_BOOT_H
+#define COLD_BOOT_H
+
+#include <stdint.h>
+
+/*******************************************************************************
+ * Function and variable prototypes
+ ******************************************************************************/
+#define LINUX_KERNEL_32 (0)
+#define LINUX_KERNEL_64 (1)
+#define DEVINFO_SIZE (4)
+
+struct atf_arg_t {
+ uint32_t atf_magic;
+ uint32_t tee_support;
+ uint64_t tee_entry;
+ uint64_t tee_boot_arg_addr;
+ uint32_t hwuid[4]; /* HW Unique id for t-base used */
+ uint32_t HRID[8]; /* HW random id for t-base used */
+ uint32_t devinfo[DEVINFO_SIZE];
+};
+
+struct mtk_bl31_fw_config {
+ void *from_bl2; /* MTK boot tag */
+ void *soc_fw_config;
+ void *hw_config;
+ void *reserved;
+};
+
+enum {
+ BOOT_ARG_FROM_BL2,
+ BOOT_ARG_SOC_FW_CONFIG,
+ BOOT_ARG_HW_CONFIG,
+ BOOT_ARG_RESERVED
+};
+
+struct kernel_info {
+ uint64_t pc;
+ uint64_t r0;
+ uint64_t r1;
+ uint64_t r2;
+ uint64_t k32_64;
+};
+
+struct mtk_bl_param_t {
+ uint64_t bootarg_loc;
+ uint64_t bootarg_size;
+ uint64_t bl33_start_addr;
+ uint64_t atf_arg_addr;
+};
+
+void *get_mtk_bl31_fw_config(int index);
+bool is_el1_2nd_bootloader(void);
+
+#endif /* COLD_BOOT_H */
diff --git a/plat/mediatek/include/lib/mtk_init/mtk_init.h b/plat/mediatek/include/lib/mtk_init/mtk_init.h
new file mode 100644
index 0000000..6f23a9b
--- /dev/null
+++ b/plat/mediatek/include/lib/mtk_init/mtk_init.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef MTK_INIT_H
+#define MTK_INIT_H
+
+#include <cdefs.h>
+#include <lib/mtk_init/mtk_init_def.h>
+
+#define INIT_CALL_EXPAND_AS_ENUMERATION(_section_enum, _section_name, _level) \
+ _section_enum = _level,
+
+#define EXPAND_AS_LINK_SECTION(_section_enum, _section_name, _level) \
+ __##_section_enum##_START__ = .; \
+ KEEP(*(_section_name##_level));
+
+#define EXPAND_AS_EXTERN(_section_enum, _section_name, _level) \
+ extern struct initcall __##_section_enum##_START__[];
+
+#define EXPAND_AS_SYMBOL_ARR(_section_enum, _section_name, _level) \
+ __##_section_enum##_START__,
+
+#define DECLARE_MTK_INITCALL(_fn, _level) \
+ const struct initcall _mtk_initcall_##_fn \
+ __used \
+ __aligned(sizeof(void *)) \
+ __section(".mtk_plat_initcall_"#_level) \
+ = { \
+ .name = #_fn, \
+ .fn = _fn \
+ }
+
+/* initcall helpers */
+#define MTK_EARLY_PLAT_INIT(_fn) DECLARE_MTK_INITCALL(_fn, 0)
+#define MTK_ARCH_INIT(_fn) DECLARE_MTK_INITCALL(_fn, 1)
+#define MTK_PLAT_SETUP_0_INIT(_fn) DECLARE_MTK_INITCALL(_fn, 2)
+#define MTK_PLAT_SETUP_1_INIT(_fn) DECLARE_MTK_INITCALL(_fn, 3)
+#define MTK_PLAT_RUNTIME_INIT(_fn) DECLARE_MTK_INITCALL(_fn, 4)
+#define MTK_PLAT_BL33_DEFER_INIT(_fn) DECLARE_MTK_INITCALL(_fn, 5)
+
+#ifndef __ASSEMBLER__
+struct initcall {
+ const char *name;
+ int (*fn)(void);
+};
+
+enum {
+ INIT_CALL_TABLE(INIT_CALL_EXPAND_AS_ENUMERATION)
+ MTK_INIT_LVL_MAX
+};
+
+void mtk_init_one_level(unsigned int level);
+#endif
+
+#endif /* MTK_INIT_H */
diff --git a/plat/mediatek/include/lib/mtk_init/mtk_init_def.h b/plat/mediatek/include/lib/mtk_init/mtk_init_def.h
new file mode 100644
index 0000000..8aae41d
--- /dev/null
+++ b/plat/mediatek/include/lib/mtk_init/mtk_init_def.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef MTK_INIT_DEF_H
+#define MTK_INIT_DEF_H
+
+/*
+ * Define init call sections here. _func is for 2nd level expansion, init
+ * section enum, and init section name.
+ */
+#define INIT_CALL_TABLE(_func) \
+ _func(MTK_INIT_LVL_EARLY_PLAT, .mtk_plat_initcall_, 0) \
+ _func(MTK_INIT_LVL_ARCH, .mtk_plat_initcall_, 1) \
+ _func(MTK_INIT_LVL_PLAT_SETUP_0, .mtk_plat_initcall_, 2) \
+ _func(MTK_INIT_LVL_PLAT_SETUP_1, .mtk_plat_initcall_, 3) \
+ _func(MTK_INIT_LVL_PLAT_RUNTIME, .mtk_plat_initcall_, 4) \
+ _func(MTK_INIT_LVL_BL33_DEFER, .mtk_plat_initcall_, 5)
+
+#endif /* MTK_INIT_DEF_H */
diff --git a/plat/mediatek/include/mt8188/platform_def.h b/plat/mediatek/include/mt8188/platform_def.h
new file mode 100644
index 0000000..962d952
--- /dev/null
+++ b/plat/mediatek/include/mt8188/platform_def.h
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) 2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#define PLAT_PRIMARY_CPU (0x0)
+
+#define MT_GIC_BASE (0x0C000000)
+#define MCUCFG_BASE (0x0C530000)
+#define IO_PHYS (0x10000000)
+
+/* Aggregate of all devices for MMU mapping */
+#define MTK_DEV_RNG0_BASE (MT_GIC_BASE)
+#define MTK_DEV_RNG0_SIZE (0x600000)
+#define MTK_DEV_RNG1_BASE (IO_PHYS)
+#define MTK_DEV_RNG1_SIZE (0x10000000)
+
+/*******************************************************************************
+ * GPIO related constants
+ ******************************************************************************/
+#define GPIO_BASE (IO_PHYS + 0x00005000)
+#define IOCFG_RM_BASE (IO_PHYS + 0x01C00000)
+#define IOCFG_LT_BASE (IO_PHYS + 0x01E10000)
+#define IOCFG_LM_BASE (IO_PHYS + 0x01E20000)
+#define IOCFG_RT_BASE (IO_PHYS + 0x01EA0000)
+
+/*******************************************************************************
+ * UART related constants
+ ******************************************************************************/
+#define UART0_BASE (IO_PHYS + 0x01002000)
+#define UART_BAUDRATE (115200)
+
+/*******************************************************************************
+ * PMIC related constants
+ ******************************************************************************/
+#define PMIC_WRAP_BASE (IO_PHYS + 0x00024000)
+
+/*******************************************************************************
+ * Infra IOMMU related constants
+ ******************************************************************************/
+#define PERICFG_AO_BASE (IO_PHYS + 0x01003000)
+#define PERICFG_AO_REG_SIZE (0x1000)
+
+/*******************************************************************************
+ * GIC-600 & interrupt handling related constants
+ ******************************************************************************/
+/* Base MTK_platform compatible GIC memory map */
+#define BASE_GICD_BASE (MT_GIC_BASE)
+#define MT_GIC_RDIST_BASE (MT_GIC_BASE + 0x40000)
+
+/*******************************************************************************
+ * CIRQ related constants
+ ******************************************************************************/
+#define SYS_CIRQ_BASE (IO_PHYS + 0x204000)
+#define MD_WDT_IRQ_BIT_ID (141)
+#define CIRQ_IRQ_NUM (730)
+#define CIRQ_REG_NUM (23)
+#define CIRQ_SPI_START (96)
+
+/*******************************************************************************
+ * MM IOMMU & SMI related constants
+ ******************************************************************************/
+#define SMI_LARB_0_BASE (IO_PHYS + 0x0c022000)
+#define SMI_LARB_1_BASE (IO_PHYS + 0x0c023000)
+#define SMI_LARB_2_BASE (IO_PHYS + 0x0c102000)
+#define SMI_LARB_3_BASE (IO_PHYS + 0x0c103000)
+#define SMI_LARB_4_BASE (IO_PHYS + 0x04013000)
+#define SMI_LARB_5_BASE (IO_PHYS + 0x04f02000)
+#define SMI_LARB_6_BASE (IO_PHYS + 0x04f03000)
+#define SMI_LARB_7_BASE (IO_PHYS + 0x04e04000)
+#define SMI_LARB_9_BASE (IO_PHYS + 0x05001000)
+#define SMI_LARB_10_BASE (IO_PHYS + 0x05120000)
+#define SMI_LARB_11A_BASE (IO_PHYS + 0x05230000)
+#define SMI_LARB_11B_BASE (IO_PHYS + 0x05530000)
+#define SMI_LARB_11C_BASE (IO_PHYS + 0x05630000)
+#define SMI_LARB_12_BASE (IO_PHYS + 0x05340000)
+#define SMI_LARB_13_BASE (IO_PHYS + 0x06001000)
+#define SMI_LARB_14_BASE (IO_PHYS + 0x06002000)
+#define SMI_LARB_15_BASE (IO_PHYS + 0x05140000)
+#define SMI_LARB_16A_BASE (IO_PHYS + 0x06008000)
+#define SMI_LARB_16B_BASE (IO_PHYS + 0x0600a000)
+#define SMI_LARB_17A_BASE (IO_PHYS + 0x06009000)
+#define SMI_LARB_17B_BASE (IO_PHYS + 0x0600b000)
+#define SMI_LARB_19_BASE (IO_PHYS + 0x0a010000)
+#define SMI_LARB_21_BASE (IO_PHYS + 0x0802e000)
+#define SMI_LARB_23_BASE (IO_PHYS + 0x0800d000)
+#define SMI_LARB_27_BASE (IO_PHYS + 0x07201000)
+#define SMI_LARB_28_BASE (IO_PHYS + 0x00000000)
+#define SMI_LARB_REG_RNG_SIZE (0x1000)
+
+/*******************************************************************************
+ * DP related constants
+ ******************************************************************************/
+#define EDP_SEC_BASE (IO_PHYS + 0x0C504000)
+#define DP_SEC_BASE (IO_PHYS + 0x0C604000)
+#define EDP_SEC_SIZE (0x1000)
+#define DP_SEC_SIZE (0x1000)
+
+/*******************************************************************************
+ * System counter frequency related constants
+ ******************************************************************************/
+#define SYS_COUNTER_FREQ_IN_HZ (13000000)
+#define SYS_COUNTER_FREQ_IN_MHZ (13)
+
+/*******************************************************************************
+ * Platform binary types for linking
+ ******************************************************************************/
+#define PLATFORM_LINKER_FORMAT "elf64-littleaarch64"
+#define PLATFORM_LINKER_ARCH aarch64
+
+/*******************************************************************************
+ * Generic platform constants
+ ******************************************************************************/
+#define PLATFORM_STACK_SIZE (0x800)
+
+#define FIRMWARE_WELCOME_STR "Booting Trusted Firmware\n"
+
+#define PLAT_MAX_PWR_LVL U(3)
+#define PLAT_MAX_RET_STATE U(1)
+#define PLAT_MAX_OFF_STATE U(9)
+
+#define PLATFORM_SYSTEM_COUNT U(1)
+#define PLATFORM_MCUSYS_COUNT U(1)
+#define PLATFORM_CLUSTER_COUNT U(1)
+#define PLATFORM_CLUSTER0_CORE_COUNT U(8)
+#define PLATFORM_CLUSTER1_CORE_COUNT U(0)
+
+#define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER0_CORE_COUNT)
+#define PLATFORM_MAX_CPUS_PER_CLUSTER U(8)
+
+#define SOC_CHIP_ID U(0x8188)
+
+/*******************************************************************************
+ * Platform memory map related constants
+ ******************************************************************************/
+#define TZRAM_BASE (0x54600000)
+#define TZRAM_SIZE (0x00030000)
+
+/*******************************************************************************
+ * BL31 specific defines.
+ ******************************************************************************/
+/*
+ * Put BL3-1 at the top of the Trusted SRAM (just below the shared memory, if
+ * present). BL31_BASE is calculated using the current BL3-1 debug size plus a
+ * little space for growth.
+ */
+#define BL31_BASE (TZRAM_BASE + 0x1000)
+#define BL31_LIMIT (TZRAM_BASE + TZRAM_SIZE)
+
+/*******************************************************************************
+ * Platform specific page table and MMU setup constants
+ ******************************************************************************/
+#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32)
+#define MAX_XLAT_TABLES (16)
+#define MAX_MMAP_REGIONS (16)
+
+/*******************************************************************************
+ * Declarations and constants to access the mailboxes safely. Each mailbox is
+ * aligned on the biggest cache line size in the platform. This is known only
+ * to the platform as it might have a combination of integrated and external
+ * caches. Such alignment ensures that two maiboxes do not sit on the same cache
+ * line at any cache level. They could belong to different cpus/clusters &
+ * get written while being protected by different locks causing corruption of
+ * a valid mailbox address.
+ ******************************************************************************/
+#define CACHE_WRITEBACK_SHIFT (6)
+#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
+
+#endif /* PLATFORM_DEF_H */
diff --git a/plat/mediatek/include/mtk_mmap_pool.h b/plat/mediatek/include/mtk_mmap_pool.h
new file mode 100644
index 0000000..99d1bff
--- /dev/null
+++ b/plat/mediatek/include/mtk_mmap_pool.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef MTK_MMAP_POOL_H
+#define MTK_MMAP_POOL_H
+
+#include <cdefs.h>
+#include <lib/xlat_tables/xlat_tables_compat.h>
+
+struct mtk_mmap_descriptor {
+ const char *mmap_name;
+ const mmap_region_t *mmap_ptr;
+ const uint32_t mmap_size;
+};
+
+#define MTK_MMAP_SECTION \
+ __used \
+ __aligned(sizeof(void *)) \
+ __section(".mtk_mmap_lists")
+
+#define DECLARE_MTK_MMAP_REGIONS(_mmap_array) \
+ static const struct mtk_mmap_descriptor _mtk_mmap_descriptor_##_mmap_array \
+ __used \
+ __aligned(sizeof(void *)) \
+ __section(".mtk_mmap_pool") \
+ = { \
+ .mmap_name = #_mmap_array, \
+ .mmap_ptr = _mmap_array, \
+ .mmap_size = ARRAY_SIZE(_mmap_array) \
+ }
+
+#define MAP_BL_RW MAP_REGION_FLAT( \
+ DATA_START, \
+ BL_END - DATA_START, \
+ MT_MEMORY | MT_RW | MT_SECURE)
+
+#if SEPARATE_CODE_AND_RODATA
+#define MAP_BL_RO \
+ MAP_REGION_FLAT( \
+ BL_CODE_BASE, \
+ BL_CODE_END - BL_CODE_BASE, \
+ MT_CODE | MT_SECURE), \
+ MAP_REGION_FLAT( \
+ BL_RO_DATA_BASE, \
+ BL_RO_DATA_END - BL_RO_DATA_BASE, \
+ MT_RO_DATA | MT_SECURE)
+#else
+#define MAP_BL_RO MAP_REGION_FLAT(BL_CODE_BASE, \
+ BL_CODE_END - BL_CODE_BASE, \
+ MT_CODE | MT_SECURE)
+#endif
+
+void mtk_xlat_init(const mmap_region_t *bl_regions);
+
+#endif /* MTK_MMAP_POOL_H */
diff --git a/plat/mediatek/include/mtk_sip_def.h b/plat/mediatek/include/mtk_sip_def.h
new file mode 100644
index 0000000..d760101
--- /dev/null
+++ b/plat/mediatek/include/mtk_sip_def.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef MTK_SIP_DEF_H
+#define MTK_SIP_DEF_H
+
+/* Define SiP SMC ID here */
+#define MTK_SIP_SMC_FROM_NS_EL1_TABLE(_func) \
+ _func(MTK_SIP_KERNEL_TIME_SYNC, 0x202) \
+ _func(MTK_SIP_VCORE_CONTROL, 0x506) \
+ _func(MTK_SIP_IOMMU_CONTROL, 0x514) \
+ _func(MTK_SIP_APUSYS_CONTROL, 0x51E) \
+ _func(MTK_SIP_DP_CONTROL, 0x523) \
+ _func(MTK_SIP_KERNEL_GIC_OP, 0x526)
+
+#define MTK_SIP_SMC_FROM_BL33_TABLE(_func) \
+ _func(MTK_SIP_KERNEL_BOOT, 0x115)
+
+#endif /* MTK_SIP_DEF_H */
diff --git a/plat/mediatek/include/mtk_sip_svc.h b/plat/mediatek/include/mtk_sip_svc.h
new file mode 100644
index 0000000..ce51048
--- /dev/null
+++ b/plat/mediatek/include/mtk_sip_svc.h
@@ -0,0 +1,106 @@
+/*
+ * Copyright (c) 2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef MTK_SIP_SVC_H
+#define MTK_SIP_SVC_H
+
+#include <stdint.h>
+#include <lib/smccc.h>
+#include <mtk_sip_def.h>
+
+/* SMC function IDs for SiP Service queries */
+#define SIP_SVC_CALL_COUNT U(0x8200ff00)
+#define SIP_SVC_UID U(0x8200ff01)
+/* 0x8200ff02 is reserved */
+#define SIP_SVC_VERSION U(0x8200ff03)
+
+/* MediaTek SiP Service Calls version numbers */
+#define MTK_SIP_SVC_VERSION_MAJOR U(0x0)
+#define MTK_SIP_SVC_VERSION_MINOR U(0x1)
+
+/* Number of MediaTek SiP Calls implemented */
+#define MTK_COMMON_SIP_NUM_CALLS U(4)
+
+/* MediaTek SiP Service Calls function IDs */
+#define MTK_SIP_SET_AUTHORIZED_SECURE_REG U(0x82000001)
+
+#define SMC_ID_EXPAND_AS_ENUM(_smc_id, _smc_num) \
+ _smc_id##_AARCH32 = ((SMC_TYPE_FAST << FUNCID_TYPE_SHIFT) | \
+ ((0) << FUNCID_CC_SHIFT) | \
+ (OEN_SIP_START << FUNCID_OEN_SHIFT) | \
+ ((_smc_num) << FUNCID_NUM_SHIFT)), \
+ _smc_id##_AARCH64 = ((SMC_TYPE_FAST << FUNCID_TYPE_SHIFT) | \
+ ((1) << FUNCID_CC_SHIFT) | \
+ (OEN_SIP_START << FUNCID_OEN_SHIFT) | \
+ ((_smc_num) << FUNCID_NUM_SHIFT)),
+
+#define SMC_ID_EXPAND_AS_EXTERN_SMC_INDEX(_smc_id, _smc_num) \
+ extern short _smc_id##_descriptor_index;
+
+/* Bind SMC handler with SMC ID */
+#define DECLARE_SMC_HANDLER(_smc_id, _smc_handler) \
+ const struct smc_descriptor _smc_id##_descriptor \
+ __used \
+ __aligned(sizeof(void *)) \
+ __section(".mtk_smc_descriptor_pool") = { \
+ .smc_handler = _smc_handler, \
+ .smc_name = #_smc_id, \
+ .smc_id_aarch32 = _smc_id##_AARCH32, \
+ .smc_id_aarch64 = _smc_id##_AARCH64, \
+ .smc_descriptor_index = &_smc_id##_descriptor_index \
+ }
+
+MTK_SIP_SMC_FROM_BL33_TABLE(SMC_ID_EXPAND_AS_EXTERN_SMC_INDEX);
+MTK_SIP_SMC_FROM_NS_EL1_TABLE(SMC_ID_EXPAND_AS_EXTERN_SMC_INDEX);
+
+/* Expand SiP SMC ID table as enum */
+enum {
+ MTK_SIP_SMC_FROM_BL33_TABLE(SMC_ID_EXPAND_AS_ENUM)
+ MTK_SIP_SMC_FROM_NS_EL1_TABLE(SMC_ID_EXPAND_AS_ENUM)
+ MTK_SIP_SMC_MAX_NUMBER
+};
+
+/* MediaTek SiP Calls error code */
+enum {
+ MTK_SIP_E_SUCCESS = 0,
+ MTK_SIP_E_INVALID_PARAM = -1,
+ MTK_SIP_E_NOT_SUPPORTED = -2,
+ MTK_SIP_E_INVALID_RANGE = -3,
+ MTK_SIP_E_PERMISSION_DENY = -4,
+ MTK_SIP_E_LOCK_FAIL = -5,
+};
+
+struct smccc_res {
+ uint64_t a1;
+ uint64_t a2;
+ uint64_t a3;
+};
+
+typedef uintptr_t (*smc_handler_t)(u_register_t,
+ u_register_t,
+ u_register_t,
+ u_register_t,
+ void *,
+ struct smccc_res *);
+
+struct smc_descriptor {
+ smc_handler_t smc_handler;
+ const uint32_t smc_id_aarch32;
+ const uint32_t smc_id_aarch64;
+ const char *smc_name;
+ short *const smc_descriptor_index;
+};
+
+/*
+ * This function should be implemented in MediaTek SOC directory. It fullfills
+ * MTK_SIP_SET_AUTHORIZED_SECURE_REG SiP call by checking the sreg with the
+ * predefined secure register list, if a match was found, set val to sreg.
+ *
+ * Return MTK_SIP_E_SUCCESS on success, and MTK_SIP_E_INVALID_PARAM on failure.
+ */
+uint64_t mt_sip_set_authorized_sreg(uint32_t sreg, uint32_t val);
+
+#endif /* MTK_SIP_SVC_H */
diff --git a/plat/mediatek/include/plat.ld.rodata.inc b/plat/mediatek/include/plat.ld.rodata.inc
new file mode 100644
index 0000000..06ad491
--- /dev/null
+++ b/plat/mediatek/include/plat.ld.rodata.inc
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_LD_RODATA_INC
+#define PLAT_LD_RODATA_INC
+
+#include <lib/mtk_init/mtk_init.h>
+ . = ALIGN(32);
+ INIT_CALL_TABLE(EXPAND_AS_LINK_SECTION);
+ __MTK_PLAT_INITCALL_END__ = .;
+ . = ALIGN(32);
+ __MTK_MMAP_POINTER_POOL_START__ = .;
+ KEEP(*(.mtk_mmap_pool))
+ __MTK_MMAP_POINTER_POOL_END_UNALIGNED__ = .;
+ . = ALIGN(8);
+ __MTK_MMAP_POOL_START__ = .;
+ KEEP(*(.mtk_mmap_lists))
+ __MTK_MMAP_POOL_END_UNALIGNED__ = .;
+ . = ALIGN(32);
+ __MTK_SMC_POOL_START__ = .;
+ KEEP(*(.mtk_smc_descriptor_pool))
+ __MTK_SMC_POOL_END_UNALIGNED__ = .;
+ . = ALIGN(8);
+#include <vendor_pubsub_events.h>
+ *(mtk_plat_ro)
+
+#endif /* PLAT_LD_RODATA_INC */
diff --git a/plat/mediatek/include/vendor_pubsub_events.h b/plat/mediatek/include/vendor_pubsub_events.h
new file mode 100644
index 0000000..cb8d878
--- /dev/null
+++ b/plat/mediatek/include/vendor_pubsub_events.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef VENDOR_PUBSUB_EVENTS_H
+#define VENDOR_PUBSUB_EVENTS_H
+
+#include <lib/el3_runtime/pubsub.h>
+
+REGISTER_PUBSUB_EVENT(lpm_publish_event);
+REGISTER_PUBSUB_EVENT(suspend_publish_event);
+REGISTER_PUBSUB_EVENT(mt_cpupm_publish_pwr_on);
+REGISTER_PUBSUB_EVENT(mt_cpupm_publish_pwr_off);
+REGISTER_PUBSUB_EVENT(mt_cpupm_publish_afflv_pwr_on);
+REGISTER_PUBSUB_EVENT(mt_cpupm_publish_afflv_pwr_off);
+REGISTER_PUBSUB_EVENT(publish_check_wakeup_irq);
+REGISTER_PUBSUB_EVENT(watchdog_timeout);
+
+#endif /* VENDOR_PUBSUB_EVENTS_H */
diff --git a/plat/mediatek/lib/mtk_init/mtk_init.c b/plat/mediatek/lib/mtk_init/mtk_init.c
new file mode 100644
index 0000000..2289659
--- /dev/null
+++ b/plat/mediatek/lib/mtk_init/mtk_init.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+#include <lib/utils_def.h>
+#include <lib/mtk_init/mtk_init.h>
+
+INIT_CALL_TABLE(EXPAND_AS_EXTERN);
+extern struct initcall __MTK_PLAT_INITCALL_END__[];
+
+struct initcall *initcall_list[] = {
+ INIT_CALL_TABLE(EXPAND_AS_SYMBOL_ARR)
+ __MTK_PLAT_INITCALL_END__
+};
+
+void mtk_init_one_level(uint32_t level)
+{
+ const struct initcall *entry;
+ int error;
+
+ if (level >= MTK_INIT_LVL_MAX) {
+ ERROR("invalid level:%u\n", level);
+ panic();
+ }
+
+ INFO("init calling level:%u\n", level);
+ for (entry = initcall_list[level];
+ (entry != NULL) && (entry < initcall_list[level + 1]);
+ entry++) {
+ INFO("calling %s\n", entry->name);
+ error = entry->fn();
+ if (error != 0) {
+ ERROR("init %s fail, errno:%d\n", entry->name, error);
+ }
+ }
+}
diff --git a/plat/mediatek/lib/mtk_init/mtk_mmap_init.c b/plat/mediatek/lib/mtk_init/mtk_mmap_init.c
new file mode 100644
index 0000000..e3dada0
--- /dev/null
+++ b/plat/mediatek/lib/mtk_init/mtk_mmap_init.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <drivers/console.h>
+#include <lib/xlat_tables/xlat_tables_compat.h>
+#include <mtk_mmap_pool.h>
+
+IMPORT_SYM(uintptr_t, __MTK_MMAP_POINTER_POOL_START__, MTK_MMAP_POINTER_POOL_START);
+IMPORT_SYM(uintptr_t, __MTK_MMAP_POINTER_POOL_END_UNALIGNED__, MTK_MMAP_POINTER_POOL_END_UNALIGNED);
+IMPORT_SYM(uintptr_t, __RW_START__, RW_START);
+IMPORT_SYM(uintptr_t, __DATA_START__, DATA_START);
+
+#define MAP_MTK_SECTIONS MAP_REGION_FLAT(RW_START, \
+ DATA_START - RW_START, \
+ MT_MEMORY | MT_RO | MT_SECURE)
+
+
+static void print_mmap(const mmap_region_t *regions)
+{
+ while (regions->size != 0U) {
+ VERBOSE("Region: 0x%lx - 0x%lx has attributes 0x%x\n",
+ regions->base_va,
+ regions->base_va + regions->size,
+ regions->attr);
+ regions++;
+ }
+}
+
+void mtk_xlat_init(const mmap_region_t *bl_regions)
+{
+ struct mtk_mmap_descriptor *iter;
+ const mmap_region_t *regions = bl_regions;
+
+ print_mmap(regions);
+ mmap_add(bl_regions);
+ if (MTK_MMAP_POINTER_POOL_START != MTK_MMAP_POINTER_POOL_END_UNALIGNED) {
+ for (iter = (struct mtk_mmap_descriptor *)MTK_MMAP_POINTER_POOL_START;
+ (char *)iter < (char *)MTK_MMAP_POINTER_POOL_END_UNALIGNED;
+ iter++) {
+ regions = iter->mmap_ptr;
+ INFO("mmap_name: %s\n", iter->mmap_name);
+ INFO("mmap_size: 0x%x\n", iter->mmap_size);
+ print_mmap(regions);
+ mmap_add(regions);
+ }
+ }
+ init_xlat_tables();
+ enable_mmu_el3(0);
+}
diff --git a/plat/mediatek/lib/mtk_init/rules.mk b/plat/mediatek/lib/mtk_init/rules.mk
new file mode 100644
index 0000000..cc6ca95
--- /dev/null
+++ b/plat/mediatek/lib/mtk_init/rules.mk
@@ -0,0 +1,14 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+LOCAL_DIR := $(call GET_LOCAL_DIR)
+
+MODULE := mtk_init
+
+LOCAL_SRCS-y := $(LOCAL_DIR)/mtk_init.c
+LOCAL_SRCS-y += $(LOCAL_DIR)/mtk_mmap_init.c
+
+$(eval $(call MAKE_MODULE,$(MODULE),$(LOCAL_SRCS-y),$(MTK_BL)))
diff --git a/plat/mediatek/lib/pm/mtk_pm.c b/plat/mediatek/lib/pm/mtk_pm.c
new file mode 100644
index 0000000..632a1e7
--- /dev/null
+++ b/plat/mediatek/lib/pm/mtk_pm.c
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <lib/psci/psci.h>
+
+static const plat_psci_ops_t plat_psci_ops = {
+};
+
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+ const plat_psci_ops_t **psci_ops)
+{
+ *psci_ops = &plat_psci_ops;
+
+ return 0;
+}
diff --git a/plat/mediatek/lib/pm/rules.mk b/plat/mediatek/lib/pm/rules.mk
new file mode 100644
index 0000000..77d0408
--- /dev/null
+++ b/plat/mediatek/lib/pm/rules.mk
@@ -0,0 +1,14 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#
+
+LOCAL_DIR := $(call GET_LOCAL_DIR)
+
+MODULE := pm
+
+LOCAL_SRCS-y := ${LOCAL_DIR}/mtk_pm.c
+
+$(eval $(call MAKE_MODULE,$(MODULE),$(LOCAL_SRCS-y),$(MTK_BL)))
diff --git a/plat/mediatek/mt8173/platform.mk b/plat/mediatek/mt8173/platform.mk
index f62802c..6bf1aa7 100644
--- a/plat/mediatek/mt8173/platform.mk
+++ b/plat/mediatek/mt8173/platform.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -8,6 +8,7 @@
MTK_PLAT_SOC := ${MTK_PLAT}/${PLAT}
PLAT_INCLUDES := -I${MTK_PLAT}/common/ \
+ -I${MTK_PLAT}/include/ \
-Iinclude/plat/arm/common/aarch64 \
-I${MTK_PLAT_SOC}/drivers/crypt/ \
-I${MTK_PLAT_SOC}/drivers/mtcmos/ \
@@ -36,10 +37,10 @@
lib/cpus/aarch64/cortex_a53.S \
lib/cpus/aarch64/cortex_a57.S \
lib/cpus/aarch64/cortex_a72.S \
- ${MTK_PLAT}/common/drivers/pmic_wrap/pmic_wrap_init.c \
- ${MTK_PLAT}/common/drivers/rtc/rtc_common.c \
${MTK_PLAT}/common/mtk_plat_common.c \
${MTK_PLAT}/common/mtk_sip_svc.c \
+ ${MTK_PLAT}/drivers/pmic_wrap/pmic_wrap_init.c \
+ ${MTK_PLAT}/drivers/rtc/rtc_common.c \
${MTK_PLAT_SOC}/aarch64/plat_helpers.S \
${MTK_PLAT_SOC}/aarch64/platform_common.c \
${MTK_PLAT_SOC}/bl31_plat_setup.c \
diff --git a/plat/mediatek/mt8183/platform.mk b/plat/mediatek/mt8183/platform.mk
index 1615cf9..a737d24 100644
--- a/plat/mediatek/mt8183/platform.mk
+++ b/plat/mediatek/mt8183/platform.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2019, MediaTek Inc. All rights reserved.
+# Copyright (c) 2019-2022, MediaTek Inc. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -8,7 +8,8 @@
MTK_PLAT_SOC := ${MTK_PLAT}/${PLAT}
PLAT_INCLUDES := -I${MTK_PLAT}/common/ \
- -I${MTK_PLAT}/common/drivers/uart/ \
+ -I${MTK_PLAT}/drivers/uart/ \
+ -I${MTK_PLAT}/include/ \
-I${MTK_PLAT_SOC}/drivers/ \
-I${MTK_PLAT_SOC}/drivers/emi_mpu/ \
-I${MTK_PLAT_SOC}/drivers/devapc/ \
@@ -43,10 +44,10 @@
lib/cpus/aarch64/cortex_a73.S \
plat/common/plat_gicv3.c \
${MTK_PLAT}/common/mtk_plat_common.c \
- ${MTK_PLAT}/common/drivers/pmic_wrap/pmic_wrap_init.c \
- ${MTK_PLAT}/common/drivers/rtc/rtc_common.c \
- ${MTK_PLAT}/common/drivers/uart/uart.c \
${MTK_PLAT}/common/params_setup.c \
+ ${MTK_PLAT}/drivers/pmic_wrap/pmic_wrap_init.c \
+ ${MTK_PLAT}/drivers/rtc/rtc_common.c \
+ ${MTK_PLAT}/drivers/uart/uart.c \
${MTK_PLAT_SOC}/aarch64/plat_helpers.S \
${MTK_PLAT_SOC}/aarch64/platform_common.c \
${MTK_PLAT_SOC}/drivers/devapc/devapc.c \
diff --git a/plat/mediatek/mt8186/drivers/mcdi/mt_lp_irqremain.c b/plat/mediatek/mt8186/drivers/mcdi/mt_lp_irqremain.c
index 42b2808..b5a0284 100644
--- a/plat/mediatek/mt8186/drivers/mcdi/mt_lp_irqremain.c
+++ b/plat/mediatek/mt8186/drivers/mcdi/mt_lp_irqremain.c
@@ -4,9 +4,9 @@
* SPDX-License-Identifier: BSD-3-Clause
*/
+#include <mt_cirq.h>
#include <mt_lp_irqremain.h>
#include <mt_lp_rm.h>
-#include <mtk_cirq.h>
#include <plat_mtk_lpm.h>
#define KEYPAD_IRQ_ID U(138)
diff --git a/plat/mediatek/mt8186/drivers/pmic/pmic_wrap_init.h b/plat/mediatek/mt8186/drivers/pmic/pmic_wrap_init.h
index e837456..e8cbf7e 100644
--- a/plat/mediatek/mt8186/drivers/pmic/pmic_wrap_init.h
+++ b/plat/mediatek/mt8186/drivers/pmic/pmic_wrap_init.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2021, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2021-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -10,10 +10,7 @@
#include <stdint.h>
#include "platform_def.h"
-
-/* external API */
-int32_t pwrap_read(uint32_t adr, uint32_t *rdata);
-int32_t pwrap_write(uint32_t adr, uint32_t wdata);
+#include <pmic_wrap_init_common.h>
static struct mt8186_pmic_wrap_regs *const mtk_pwrap = (void *)PMIC_WRAP_BASE;
@@ -61,34 +58,4 @@
WACS_SYNC_BUSY = 0x00
};
-/* error information flag */
-enum {
- E_PWR_INVALID_ARG = 1,
- E_PWR_INVALID_RW = 2,
- E_PWR_INVALID_ADDR = 3,
- E_PWR_INVALID_WDAT = 4,
- E_PWR_INVALID_OP_MANUAL = 5,
- E_PWR_NOT_IDLE_STATE = 6,
- E_PWR_NOT_INIT_DONE = 7,
- E_PWR_NOT_INIT_DONE_READ = 8,
- E_PWR_WAIT_IDLE_TIMEOUT = 9,
- E_PWR_WAIT_IDLE_TIMEOUT_READ = 10,
- E_PWR_INIT_SIDLY_FAIL = 11,
- E_PWR_RESET_TIMEOUT = 12,
- E_PWR_TIMEOUT = 13,
- E_PWR_INIT_RESET_SPI = 20,
- E_PWR_INIT_SIDLY = 21,
- E_PWR_INIT_REG_CLOCK = 22,
- E_PWR_INIT_ENABLE_PMIC = 23,
- E_PWR_INIT_DIO = 24,
- E_PWR_INIT_CIPHER = 25,
- E_PWR_INIT_WRITE_TEST = 26,
- E_PWR_INIT_ENABLE_CRC = 27,
- E_PWR_INIT_ENABLE_DEWRAP = 28,
- E_PWR_INIT_ENABLE_EVENT = 29,
- E_PWR_READ_TEST_FAIL = 30,
- E_PWR_WRITE_TEST_FAIL = 31,
- E_PWR_SWITCH_DIO = 32
-};
-
#endif /* PMIC_WRAP_INIT_H */
diff --git a/plat/mediatek/mt8186/drivers/spm/constraints/mt_spm_rc_bus26m.c b/plat/mediatek/mt8186/drivers/spm/constraints/mt_spm_rc_bus26m.c
index 66fbe91..dd2aee8 100644
--- a/plat/mediatek/mt8186/drivers/spm/constraints/mt_spm_rc_bus26m.c
+++ b/plat/mediatek/mt8186/drivers/spm/constraints/mt_spm_rc_bus26m.c
@@ -26,7 +26,7 @@
#include <mt_spm_suspend.h>
#ifndef ATF_PLAT_CIRQ_UNSUPPORT
-#include <mtk_cirq.h>
+#include <mt_cirq.h>
#endif
#include <plat_mtk_lpm.h>
diff --git a/plat/mediatek/mt8186/plat_sip_calls.c b/plat/mediatek/mt8186/plat_sip_calls.c
index cb66218..d9144d8 100644
--- a/plat/mediatek/mt8186/plat_sip_calls.c
+++ b/plat/mediatek/mt8186/plat_sip_calls.c
@@ -23,8 +23,8 @@
uint64_t ret;
switch (smc_fid) {
- case MTK_SIP_VCORE_CONTROL_ARCH32:
- case MTK_SIP_VCORE_CONTROL_ARCH64:
+ case MTK_SIP_VCORE_CONTROL_AARCH32:
+ case MTK_SIP_VCORE_CONTROL_AARCH64:
ret = spm_vcorefs_args(x1, x2, x3, (uint64_t *)&x4);
SMC_RET2(handle, ret, x4);
break;
diff --git a/plat/mediatek/mt8186/platform.mk b/plat/mediatek/mt8186/platform.mk
index b6d9ca8..8717d7d 100644
--- a/plat/mediatek/mt8186/platform.mk
+++ b/plat/mediatek/mt8186/platform.mk
@@ -8,16 +8,19 @@
MTK_PLAT_SOC := ${MTK_PLAT}/${PLAT}
PLAT_INCLUDES := -I${MTK_PLAT}/common/ \
- -I${MTK_PLAT}/common/drivers/gic600/ \
- -I${MTK_PLAT}/common/drivers/gpio/ \
- -I${MTK_PLAT}/common/drivers/uart/ \
- -I${MTK_PLAT}/common/drivers/timer/ \
- -I${MTK_PLAT}/common/lpm/ \
+ -I${MTK_PLAT}/drivers/cirq/ \
+ -I${MTK_PLAT}/drivers/gic600/ \
+ -I${MTK_PLAT}/drivers/gpio/ \
+ -I${MTK_PLAT}/drivers/lpm/ \
+ -I${MTK_PLAT}/drivers/pmic_wrap/ \
+ -I${MTK_PLAT}/drivers/timer/ \
+ -I${MTK_PLAT}/drivers/uart/ \
+ -I${MTK_PLAT}/include/ \
-I${MTK_PLAT_SOC}/drivers/spm/ \
-I${MTK_PLAT_SOC}/drivers/dcm/ \
- -I${MTK_PLAT_SOC}/drivers/dfd/ \
+ -I${MTK_PLAT_SOC}/drivers/dfd/ \
-I${MTK_PLAT_SOC}/drivers/emi_mpu/ \
- -I${MTK_PLAT_SOC}/drivers/gpio/ \
+ -I${MTK_PLAT_SOC}/drivers/gpio/ \
-I${MTK_PLAT_SOC}/drivers/mcdi/ \
-I${MTK_PLAT_SOC}/drivers/pmic/ \
-I${MTK_PLAT_SOC}/drivers/rtc/ \
@@ -43,17 +46,17 @@
lib/cpus/aarch64/cortex_a55.S \
lib/cpus/aarch64/cortex_a76.S \
plat/common/plat_gicv3.c \
- ${MTK_PLAT}/common/drivers/gic600/mt_gic_v3.c \
- ${MTK_PLAT}/common/drivers/gpio/mtgpio_common.c \
- ${MTK_PLAT}/common/drivers/pmic_wrap/pmic_wrap_init.c \
- ${MTK_PLAT}/common/drivers/rtc/rtc_common.c \
${MTK_PLAT}/common/mtk_plat_common.c \
${MTK_PLAT}/common/mtk_sip_svc.c \
${MTK_PLAT}/common/params_setup.c \
- ${MTK_PLAT}/common/drivers/timer/mt_timer.c \
- ${MTK_PLAT}/common/drivers/uart/uart.c \
- ${MTK_PLAT}/common/mtk_cirq.c \
- ${MTK_PLAT}/common/lpm/mt_lp_rm.c \
+ ${MTK_PLAT}/drivers/cirq/mt_cirq.c \
+ ${MTK_PLAT}/drivers/gic600/mt_gic_v3.c \
+ ${MTK_PLAT}/drivers/gpio/mtgpio_common.c \
+ ${MTK_PLAT}/drivers/lpm/mt_lp_rm.c \
+ ${MTK_PLAT}/drivers/pmic_wrap/pmic_wrap_init.c \
+ ${MTK_PLAT}/drivers/rtc/rtc_common.c \
+ ${MTK_PLAT}/drivers/timer/mt_timer.c \
+ ${MTK_PLAT}/drivers/uart/uart.c \
${MTK_PLAT_SOC}/aarch64/platform_common.c \
${MTK_PLAT_SOC}/aarch64/plat_helpers.S \
${MTK_PLAT_SOC}/bl31_plat_setup.c \
diff --git a/plat/mediatek/mt8188/aarch64/plat_helpers.S b/plat/mediatek/mt8188/aarch64/plat_helpers.S
new file mode 100644
index 0000000..7073ab1
--- /dev/null
+++ b/plat/mediatek/mt8188/aarch64/plat_helpers.S
@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <platform_def.h>
+
+ .globl plat_is_my_cpu_primary
+ .globl plat_my_core_pos
+ .globl plat_mediatek_calc_core_pos
+
+func plat_is_my_cpu_primary
+ mrs x0, mpidr_el1
+ and x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
+ cmp x0, #PLAT_PRIMARY_CPU
+ cset x0, eq
+ ret
+endfunc plat_is_my_cpu_primary
+
+ /* -----------------------------------------------------
+ * unsigned int plat_my_core_pos(void)
+ * This function uses the plat_mediatek_calc_core_pos()
+ * definition to get the index of the calling CPU.
+ * -----------------------------------------------------
+ */
+func plat_my_core_pos
+ mrs x0, mpidr_el1
+ b plat_mediatek_calc_core_pos
+endfunc plat_my_core_pos
+
+ /* -----------------------------------------------------
+ * unsigned int plat_mediatek_calc_core_pos(u_register_t mpidr);
+ *
+ * With this function: CorePos = CoreID (AFF1)
+ * we do it with x0 = (x0 >> 8) & 0xff
+ * -----------------------------------------------------
+ */
+func plat_mediatek_calc_core_pos
+ mov x1, #MPIDR_AFFLVL_MASK
+ and x0, x1, x0, lsr #MPIDR_AFF1_SHIFT
+ ret
+endfunc plat_mediatek_calc_core_pos
diff --git a/plat/mediatek/mt8188/include/plat_helpers.h b/plat/mediatek/mt8188/include/plat_helpers.h
new file mode 100644
index 0000000..eb78623
--- /dev/null
+++ b/plat/mediatek/mt8188/include/plat_helpers.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (c) 2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_HELPERS_H
+#define PLAT_HELPERS_H
+
+unsigned int plat_mediatek_calc_core_pos(u_register_t mpidr);
+
+#endif /* PLAT_HELPERS_H */
diff --git a/plat/mediatek/mt8188/include/plat_macros.S b/plat/mediatek/mt8188/include/plat_macros.S
new file mode 100644
index 0000000..a6e05a9
--- /dev/null
+++ b/plat/mediatek/mt8188/include/plat_macros.S
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_MACROS_S
+#define PLAT_MACROS_S
+
+#include <platform_def.h>
+
+.section .rodata.gic_reg_name, "aS"
+gicc_regs:
+ .asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", ""
+gicd_pend_reg:
+ .asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n" \
+ " Offset:\t\t\tvalue\n"
+newline:
+ .asciz "\n"
+spacer:
+ .asciz ":\t\t0x"
+
+.section .rodata.cci_reg_name, "aS"
+cci_iface_regs:
+ .asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , ""
+
+ /* ---------------------------------------------
+ * The below macro prints out relevant GIC
+ * registers whenever an unhandled exception
+ * is taken in BL31.
+ * Clobbers: x0 - x10, x26, x27, sp
+ * ---------------------------------------------
+ */
+ .macro plat_crash_print_regs
+ /* TODO: leave implementation to GIC owner */
+ .endm
+
+#endif /* PLAT_MACROS_S */
diff --git a/plat/mediatek/mt8188/include/plat_private.h b/plat/mediatek/mt8188/include/plat_private.h
new file mode 100644
index 0000000..4d4ac85
--- /dev/null
+++ b/plat/mediatek/mt8188/include/plat_private.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_PRIVATE_H
+#define PLAT_PRIVATE_H
+
+/*******************************************************************************
+ * Function and variable prototypes
+ ******************************************************************************/
+void plat_configure_mmu_el3(uintptr_t total_base,
+ uintptr_t total_size,
+ uintptr_t ro_start,
+ uintptr_t ro_limit);
+
+#endif /* PLAT_PRIVATE_H */
diff --git a/plat/mediatek/mt8188/plat_config.mk b/plat/mediatek/mt8188/plat_config.mk
new file mode 100644
index 0000000..0c1e7cd
--- /dev/null
+++ b/plat/mediatek/mt8188/plat_config.mk
@@ -0,0 +1,34 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Separate text code and read only data
+SEPARATE_CODE_AND_RODATA := 1
+# ARMv8.2 and above need enable HW assist coherence
+HW_ASSISTED_COHERENCY := 1
+# No need coherency memory because of HW assistency
+USE_COHERENT_MEM := 0
+# GIC600
+GICV3_SUPPORT_GIC600 := 1
+#
+# MTK options
+#
+PLAT_EXTRA_RODATA_INCLUDES := 1
+USE_PMIC_WRAP_INIT_V2 := 1
+USE_RTC_MT6359P := 1
+
+# Configs for A78 and A55
+CTX_INCLUDE_AARCH32_REGS := 0
+ERRATA_A55_1530923 := 1
+ERRATA_A55_1221012 := 1
+ERRATA_A78_1688305 := 1
+ERRATA_A78_1941498 := 1
+ERRATA_A78_1951500 := 1
+ERRATA_A78_1821534 := 1
+ERRATA_A78_2132060 := 1
+ERRATA_A78_2242635 := 1
+
+MACH_MT8188 := 1
+$(eval $(call add_define,MACH_MT8188))
diff --git a/plat/mediatek/mt8188/plat_mmap.c b/plat/mediatek/mt8188/plat_mmap.c
new file mode 100644
index 0000000..0d4cbe8
--- /dev/null
+++ b/plat/mediatek/mt8188/plat_mmap.c
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+#include <mtk_mmap_pool.h>
+#include <platform_def.h>
+
+static const mmap_region_t plat_mmap[] = {
+ MAP_REGION_FLAT(MTK_DEV_RNG0_BASE, MTK_DEV_RNG0_SIZE,
+ MT_DEVICE | MT_RW | MT_SECURE),
+ MAP_REGION_FLAT(MTK_DEV_RNG1_BASE, MTK_DEV_RNG1_SIZE,
+ MT_DEVICE | MT_RW | MT_SECURE),
+ { 0 }
+};
+DECLARE_MTK_MMAP_REGIONS(plat_mmap);
diff --git a/plat/mediatek/mt8188/plat_topology.c b/plat/mediatek/mt8188/plat_topology.c
new file mode 100644
index 0000000..9fa2855
--- /dev/null
+++ b/plat/mediatek/mt8188/plat_topology.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright (c) 2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <lib/psci/psci.h>
+
+#include <plat_helpers.h>
+#include <platform_def.h>
+
+const unsigned char mtk_power_domain_tree_desc[] = {
+ /* Number of root nodes */
+ PLATFORM_SYSTEM_COUNT,
+ /* Number of children for the root node */
+ PLATFORM_MCUSYS_COUNT,
+ /* Number of children for the mcusys node */
+ PLATFORM_CLUSTER_COUNT,
+ /* Number of children for the first cluster node */
+ PLATFORM_CLUSTER0_CORE_COUNT,
+};
+
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+ return mtk_power_domain_tree_desc;
+}
+
+/*******************************************************************************
+ * This function implements a part of the critical interface between the psci
+ * generic layer and the platform that allows the former to query the platform
+ * to convert an MPIDR to a unique linear index. An error code (-1) is returned
+ * in case the MPIDR is invalid.
+ ******************************************************************************/
+int plat_core_pos_by_mpidr(u_register_t mpidr)
+{
+ unsigned int cluster_id, cpu_id;
+
+ if ((read_mpidr() & MPIDR_MT_MASK) != 0) {
+ /* ARMv8.2 arch */
+ if ((mpidr & (MPIDR_AFFLVL_MASK << MPIDR_AFF0_SHIFT)) != 0) {
+ return -1;
+ }
+ return plat_mediatek_calc_core_pos(mpidr);
+ }
+
+ mpidr &= MPIDR_AFFINITY_MASK;
+
+ if ((mpidr & ~(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)) != 0) {
+ return -1;
+ }
+
+ cluster_id = (mpidr >> MPIDR_AFF1_SHIFT) & MPIDR_AFFLVL_MASK;
+ cpu_id = (mpidr >> MPIDR_AFF0_SHIFT) & MPIDR_AFFLVL_MASK;
+
+ if (cluster_id >= PLATFORM_CLUSTER_COUNT) {
+ return -1;
+ }
+
+ /*
+ * Validate cpu_id by checking whether it represents a CPU in
+ * one of the two clusters present on the platform.
+ */
+ if (cpu_id >= PLATFORM_MAX_CPUS_PER_CLUSTER) {
+ return -1;
+ }
+
+ return (cpu_id + (cluster_id * 8));
+}
diff --git a/plat/mediatek/mt8188/platform.mk b/plat/mediatek/mt8188/platform.mk
new file mode 100644
index 0000000..84bcfac
--- /dev/null
+++ b/plat/mediatek/mt8188/platform.mk
@@ -0,0 +1,56 @@
+#
+# Copyright (c) 2022, MediaTek Inc. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+MTK_PLAT := plat/mediatek
+MTK_PLAT_SOC := ${MTK_PLAT}/${PLAT}
+MTK_SOC := ${PLAT}
+
+include plat/mediatek/build_helpers/mtk_build_helpers.mk
+include drivers/arm/gic/v3/gicv3.mk
+include lib/xlat_tables_v2/xlat_tables.mk
+
+PLAT_INCLUDES := -I${MTK_PLAT}/common \
+ -I${MTK_PLAT}/include \
+ -I${MTK_PLAT}/include/${MTK_SOC} \
+ -I${MTK_PLAT} \
+ -I${MTK_PLAT_SOC}/include \
+ -Idrivers/arm/gic \
+
+MODULES-y += $(MTK_PLAT)/common
+MODULES-y += $(MTK_PLAT)/lib/mtk_init
+MODULES-y += $(MTK_PLAT)/lib/pm
+MODULES-y += $(MTK_PLAT)/drivers/cirq
+MODULES-y += $(MTK_PLAT)/drivers/dp
+MODULES-y += $(MTK_PLAT)/drivers/gic600
+MODULES-y += $(MTK_PLAT)/drivers/gpio
+MODULES-y += $(MTK_PLAT)/drivers/iommu
+MODULES-y += $(MTK_PLAT)/drivers/pmic
+MODULES-y += $(MTK_PLAT)/drivers/pmic_wrap
+MODULES-y += $(MTK_PLAT)/drivers/rtc
+MODULES-y += $(MTK_PLAT)/drivers/timer
+
+PLAT_BL_COMMON_SOURCES := common/desc_image_load.c \
+ drivers/ti/uart/aarch64/16550_console.S \
+ lib/bl_aux_params/bl_aux_params.c
+
+BL31_SOURCES += drivers/delay_timer/delay_timer.c \
+ drivers/delay_timer/generic_delay_timer.c \
+ lib/cpus/aarch64/cortex_a55.S \
+ lib/cpus/aarch64/cortex_a78.S \
+ ${GICV3_SOURCES} \
+ ${XLAT_TABLES_LIB_SRCS} \
+ plat/common/plat_gicv3.c \
+ plat/common/plat_psci_common.c \
+ plat/common/aarch64/crash_console_helpers.S \
+ ${MTK_PLAT}/common/mtk_plat_common.c \
+ ${MTK_PLAT}/common/params_setup.c \
+ ${MTK_PLAT_SOC}/aarch64/plat_helpers.S \
+ $(MTK_PLAT)/$(MTK_SOC)/plat_mmap.c \
+ $(MTK_PLAT)/$(MTK_SOC)/plat_topology.c
+
+include plat/mediatek/build_helpers/mtk_build_helpers_epilogue.mk
+
+include lib/coreboot/coreboot.mk
diff --git a/plat/mediatek/mt8192/drivers/mcdi/mt_lp_irqremain.c b/plat/mediatek/mt8192/drivers/mcdi/mt_lp_irqremain.c
index e74d3e7..872f4d0 100644
--- a/plat/mediatek/mt8192/drivers/mcdi/mt_lp_irqremain.c
+++ b/plat/mediatek/mt8192/drivers/mcdi/mt_lp_irqremain.c
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
-#include <mt_lp_rm.h>
+#include <mt_cirq.h>
#include <mt_lp_irqremain.h>
-#include <mtk_cirq.h>
+#include <mt_lp_rm.h>
#include <plat_mtk_lpm.h>
#define EDMA0_IRQ_ID U(448)
diff --git a/plat/mediatek/mt8192/drivers/pmic/pmic_wrap_init.h b/plat/mediatek/mt8192/drivers/pmic/pmic_wrap_init.h
index ae892ed..b9ab586 100644
--- a/plat/mediatek/mt8192/drivers/pmic/pmic_wrap_init.h
+++ b/plat/mediatek/mt8192/drivers/pmic/pmic_wrap_init.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -10,10 +10,7 @@
#include <stdint.h>
#include "platform_def.h"
-
-/* external API */
-int32_t pwrap_read(uint32_t adr, uint32_t *rdata);
-int32_t pwrap_write(uint32_t adr, uint32_t wdata);
+#include <pmic_wrap_init_common.h>
static struct mt8192_pmic_wrap_regs *const mtk_pwrap = (void *)PMIC_WRAP_BASE;
@@ -30,47 +27,4 @@
uint32_t wacs2_sta;
};
-#define GET_WACS_FSM(x) ((x >> 1) & 0x7)
-
-/* macro for SWINF_FSM */
-#define SWINF_FSM_IDLE (0x00)
-#define SWINF_FSM_REQ (0x02)
-#define SWINF_FSM_WFDLE (0x04)
-#define SWINF_FSM_WFVLDCLR (0x06)
-#define SWINF_INIT_DONE (0x01)
-
-/* timeout setting */
-#define PWRAP_READ_US 1000
-#define PWRAP_WAIT_IDLE_US 1000
-
-/* error information flag */
-enum pwrap_errno {
- E_PWR_INVALID_ARG = 1,
- E_PWR_INVALID_RW = 2,
- E_PWR_INVALID_ADDR = 3,
- E_PWR_INVALID_WDAT = 4,
- E_PWR_INVALID_OP_MANUAL = 5,
- E_PWR_NOT_IDLE_STATE = 6,
- E_PWR_NOT_INIT_DONE = 7,
- E_PWR_NOT_INIT_DONE_READ = 8,
- E_PWR_WAIT_IDLE_TIMEOUT = 9,
- E_PWR_WAIT_IDLE_TIMEOUT_READ = 10,
- E_PWR_INIT_SIDLY_FAIL = 11,
- E_PWR_RESET_TIMEOUT = 12,
- E_PWR_TIMEOUT = 13,
- E_PWR_INIT_RESET_SPI = 20,
- E_PWR_INIT_SIDLY = 21,
- E_PWR_INIT_REG_CLOCK = 22,
- E_PWR_INIT_ENABLE_PMIC = 23,
- E_PWR_INIT_DIO = 24,
- E_PWR_INIT_CIPHER = 25,
- E_PWR_INIT_WRITE_TEST = 26,
- E_PWR_INIT_ENABLE_CRC = 27,
- E_PWR_INIT_ENABLE_DEWRAP = 28,
- E_PWR_INIT_ENABLE_EVENT = 29,
- E_PWR_READ_TEST_FAIL = 30,
- E_PWR_WRITE_TEST_FAIL = 31,
- E_PWR_SWITCH_DIO = 32
-};
-
#endif /* PMIC_WRAP_INIT_H */
diff --git a/plat/mediatek/mt8192/drivers/spm/constraints/mt_spm_rc_bus26m.c b/plat/mediatek/mt8192/drivers/spm/constraints/mt_spm_rc_bus26m.c
index f66b8ec..18c43b1 100644
--- a/plat/mediatek/mt8192/drivers/spm/constraints/mt_spm_rc_bus26m.c
+++ b/plat/mediatek/mt8192/drivers/spm/constraints/mt_spm_rc_bus26m.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -23,8 +23,8 @@
#include <plat_mtk_lpm.h>
#ifndef ATF_PLAT_CIRQ_UNSUPPORT
+#include <mt_cirq.h>
#include <mt_gic_v3.h>
-#include <mtk_cirq.h>
#endif
#define CONSTRAINT_BUS26M_ALLOW \
diff --git a/plat/mediatek/mt8192/plat_sip_calls.c b/plat/mediatek/mt8192/plat_sip_calls.c
index 353faf8..0fffed5 100644
--- a/plat/mediatek/mt8192/plat_sip_calls.c
+++ b/plat/mediatek/mt8192/plat_sip_calls.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -25,8 +25,8 @@
uint32_t rnd_val0 = 0U;
switch (smc_fid) {
- case MTK_SIP_VCORE_CONTROL_ARCH32:
- case MTK_SIP_VCORE_CONTROL_ARCH64:
+ case MTK_SIP_VCORE_CONTROL_AARCH32:
+ case MTK_SIP_VCORE_CONTROL_AARCH64:
ret = spm_vcorefs_args(x1, x2, x3, (uint64_t *)&x4);
SMC_RET2(handle, ret, x4);
break;
diff --git a/plat/mediatek/mt8192/platform.mk b/plat/mediatek/mt8192/platform.mk
index cbdaadd..efc14ec 100644
--- a/plat/mediatek/mt8192/platform.mk
+++ b/plat/mediatek/mt8192/platform.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2020, MediaTek Inc. All rights reserved.
+# Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -8,12 +8,16 @@
MTK_PLAT_SOC := ${MTK_PLAT}/${PLAT}
PLAT_INCLUDES := -I${MTK_PLAT}/common/ \
- -I${MTK_PLAT}/common/drivers/gic600/ \
- -I${MTK_PLAT}/common/drivers/gpio/ \
- -I${MTK_PLAT}/common/drivers/rtc/ \
- -I${MTK_PLAT}/common/drivers/timer/ \
- -I${MTK_PLAT}/common/drivers/uart/ \
- -I${MTK_PLAT}/common/lpm/ \
+ -I${MTK_PLAT}/drivers/cirq/ \
+ -I${MTK_PLAT}/drivers/gic600/ \
+ -I${MTK_PLAT}/drivers/gpio/ \
+ -I${MTK_PLAT}/drivers/lpm/ \
+ -I${MTK_PLAT}/drivers/pmic/ \
+ -I${MTK_PLAT}/drivers/pmic_wrap/ \
+ -I${MTK_PLAT}/drivers/rtc/ \
+ -I${MTK_PLAT}/drivers/timer/ \
+ -I${MTK_PLAT}/drivers/uart/ \
+ -I${MTK_PLAT}/include/ \
-I${MTK_PLAT_SOC}/include/ \
-I${MTK_PLAT_SOC}/drivers/ \
-I${MTK_PLAT_SOC}/drivers/apusys/ \
@@ -45,22 +49,22 @@
lib/cpus/aarch64/cortex_a55.S \
lib/cpus/aarch64/cortex_a76.S \
plat/common/plat_gicv3.c \
- ${MTK_PLAT}/common/drivers/gic600/mt_gic_v3.c \
- ${MTK_PLAT}/common/drivers/gpio/mtgpio_common.c \
- ${MTK_PLAT}/common/drivers/pmic_wrap/pmic_wrap_init_v2.c \
- ${MTK_PLAT}/common/drivers/rtc/rtc_common.c \
- ${MTK_PLAT}/common/drivers/rtc/rtc_mt6359p.c \
- ${MTK_PLAT}/common/drivers/timer/mt_timer.c \
- ${MTK_PLAT}/common/drivers/uart/uart.c \
- ${MTK_PLAT}/common/lpm/mt_lp_rm.c \
- ${MTK_PLAT}/common/mtk_cirq.c \
${MTK_PLAT}/common/mtk_plat_common.c \
${MTK_PLAT}/common/mtk_sip_svc.c \
${MTK_PLAT}/common/params_setup.c \
+ ${MTK_PLAT}/drivers/cirq/mt_cirq.c \
+ ${MTK_PLAT}/drivers/gic600/mt_gic_v3.c \
+ ${MTK_PLAT}/drivers/gpio/mtgpio_common.c \
+ ${MTK_PLAT}/drivers/lpm/mt_lp_rm.c \
+ ${MTK_PLAT}/drivers/pmic/pmic.c \
+ ${MTK_PLAT}/drivers/pmic_wrap/pmic_wrap_init_v2.c \
+ ${MTK_PLAT}/drivers/rtc/rtc_common.c \
+ ${MTK_PLAT}/drivers/rtc/rtc_mt6359p.c \
+ ${MTK_PLAT}/drivers/timer/mt_timer.c \
+ ${MTK_PLAT}/drivers/uart/uart.c \
${MTK_PLAT_SOC}/aarch64/platform_common.c \
${MTK_PLAT_SOC}/aarch64/plat_helpers.S \
${MTK_PLAT_SOC}/bl31_plat_setup.c \
- ${MTK_PLAT_SOC}/drivers/pmic/pmic.c \
${MTK_PLAT_SOC}/plat_pm.c \
${MTK_PLAT_SOC}/plat_topology.c \
${MTK_PLAT_SOC}/plat_sip_calls.c \
diff --git a/plat/mediatek/mt8195/aarch64/platform_common.c b/plat/mediatek/mt8195/aarch64/platform_common.c
index 2b95171..1f5c5fa 100644
--- a/plat/mediatek/mt8195/aarch64/platform_common.c
+++ b/plat/mediatek/mt8195/aarch64/platform_common.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2021-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -19,7 +19,7 @@
MT_DEVICE | MT_RW | MT_SECURE),
MAP_REGION_FLAT(DP_SEC_BASE, DP_SEC_SIZE,
MT_DEVICE | MT_RW | MT_SECURE),
- MAP_REGION_FLAT(eDP_SEC_BASE, eDP_SEC_SIZE,
+ MAP_REGION_FLAT(EDP_SEC_BASE, EDP_SEC_SIZE,
MT_DEVICE | MT_RW | MT_SECURE),
MAP_REGION_FLAT(APUSYS_SCTRL_REVISER_BASE, APUSYS_SCTRL_REVISER_SIZE,
MT_DEVICE | MT_RW | MT_SECURE),
diff --git a/plat/mediatek/mt8195/drivers/mcdi/mt_lp_irqremain.c b/plat/mediatek/mt8195/drivers/mcdi/mt_lp_irqremain.c
index 4147184..f415cb8 100644
--- a/plat/mediatek/mt8195/drivers/mcdi/mt_lp_irqremain.c
+++ b/plat/mediatek/mt8195/drivers/mcdi/mt_lp_irqremain.c
@@ -1,15 +1,14 @@
/*
- * Copyright (c) 2021, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2021-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
-#include <mt_lp_rm.h>
+#include <mt_cirq.h>
#include <mt_lp_irqremain.h>
-#include <mtk_cirq.h>
+#include <mt_lp_rm.h>
#include <plat_mtk_lpm.h>
-
#define KEYPAD_IRQ_ID U(138)
#define KEYPAD_WAKESRC 0x4
diff --git a/plat/mediatek/mt8195/drivers/pmic/pmic.c b/plat/mediatek/mt8195/drivers/pmic/pmic.c
deleted file mode 100644
index cca4413..0000000
--- a/plat/mediatek/mt8195/drivers/pmic/pmic.c
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <pmic.h>
-#include <pmic_wrap_init.h>
-
-void pmic_power_off(void)
-{
- pwrap_write(PMIC_PWRHOLD, 0x0);
-}
diff --git a/plat/mediatek/mt8195/drivers/pmic/pmic.h b/plat/mediatek/mt8195/drivers/pmic/pmic.h
deleted file mode 100644
index aac22af..0000000
--- a/plat/mediatek/mt8195/drivers/pmic/pmic.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#ifndef PMIC_H
-#define PMIC_H
-
-#define PMIC_PWRHOLD 0xa08
-
-/* external API */
-void pmic_power_off(void);
-
-#endif /* PMIC_H */
diff --git a/plat/mediatek/mt8195/drivers/pmic/pmic_wrap_init.h b/plat/mediatek/mt8195/drivers/pmic/pmic_wrap_init.h
index 39e78f5..9e6e74c 100644
--- a/plat/mediatek/mt8195/drivers/pmic/pmic_wrap_init.h
+++ b/plat/mediatek/mt8195/drivers/pmic/pmic_wrap_init.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -10,10 +10,7 @@
#include <stdint.h>
#include "platform_def.h"
-
-/* external API */
-int32_t pwrap_read(uint32_t adr, uint32_t *rdata);
-int32_t pwrap_write(uint32_t adr, uint32_t wdata);
+#include <pmic_wrap_init_common.h>
static struct mt8195_pmic_wrap_regs *const mtk_pwrap = (void *)PMIC_WRAP_BASE;
@@ -30,47 +27,4 @@
uint32_t wacs2_sta;
};
-#define GET_WACS_FSM(x) ((x >> 1) & 0x7)
-
-/* macro for SWINF_FSM */
-#define SWINF_FSM_IDLE (0x00)
-#define SWINF_FSM_REQ (0x02)
-#define SWINF_FSM_WFDLE (0x04)
-#define SWINF_FSM_WFVLDCLR (0x06)
-#define SWINF_INIT_DONE (0x01)
-
-/* timeout setting */
-#define PWRAP_READ_US 1000
-#define PWRAP_WAIT_IDLE_US 1000
-
-/* error information flag */
-enum pwrap_errno {
- E_PWR_INVALID_ARG = 1,
- E_PWR_INVALID_RW = 2,
- E_PWR_INVALID_ADDR = 3,
- E_PWR_INVALID_WDAT = 4,
- E_PWR_INVALID_OP_MANUAL = 5,
- E_PWR_NOT_IDLE_STATE = 6,
- E_PWR_NOT_INIT_DONE = 7,
- E_PWR_NOT_INIT_DONE_READ = 8,
- E_PWR_WAIT_IDLE_TIMEOUT = 9,
- E_PWR_WAIT_IDLE_TIMEOUT_READ = 10,
- E_PWR_INIT_SIDLY_FAIL = 11,
- E_PWR_RESET_TIMEOUT = 12,
- E_PWR_TIMEOUT = 13,
- E_PWR_INIT_RESET_SPI = 20,
- E_PWR_INIT_SIDLY = 21,
- E_PWR_INIT_REG_CLOCK = 22,
- E_PWR_INIT_ENABLE_PMIC = 23,
- E_PWR_INIT_DIO = 24,
- E_PWR_INIT_CIPHER = 25,
- E_PWR_INIT_WRITE_TEST = 26,
- E_PWR_INIT_ENABLE_CRC = 27,
- E_PWR_INIT_ENABLE_DEWRAP = 28,
- E_PWR_INIT_ENABLE_EVENT = 29,
- E_PWR_READ_TEST_FAIL = 30,
- E_PWR_WRITE_TEST_FAIL = 31,
- E_PWR_SWITCH_DIO = 32
-};
-
#endif /* PMIC_WRAP_INIT_H */
diff --git a/plat/mediatek/mt8195/drivers/spm/constraints/mt_spm_rc_bus26m.c b/plat/mediatek/mt8195/drivers/spm/constraints/mt_spm_rc_bus26m.c
index d2ad282..87278d7 100644
--- a/plat/mediatek/mt8195/drivers/spm/constraints/mt_spm_rc_bus26m.c
+++ b/plat/mediatek/mt8195/drivers/spm/constraints/mt_spm_rc_bus26m.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2021, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2021-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -23,8 +23,8 @@
#include <plat_mtk_lpm.h>
#ifndef ATF_PLAT_CIRQ_UNSUPPORT
+#include <mt_cirq.h>
#include <mt_gic_v3.h>
-#include <mtk_cirq.h>
#endif
#define CONSTRAINT_BUS26M_ALLOW \
diff --git a/plat/mediatek/mt8195/include/platform_def.h b/plat/mediatek/mt8195/include/platform_def.h
index d4f2f83..2a2f559 100644
--- a/plat/mediatek/mt8195/include/platform_def.h
+++ b/plat/mediatek/mt8195/include/platform_def.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2021-2022, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -48,9 +48,9 @@
/*******************************************************************************
* DP/eDP related constants
******************************************************************************/
-#define eDP_SEC_BASE (IO_PHYS + 0x0C504000)
+#define EDP_SEC_BASE (IO_PHYS + 0x0C504000)
#define DP_SEC_BASE (IO_PHYS + 0x0C604000)
-#define eDP_SEC_SIZE 0x1000
+#define EDP_SEC_SIZE 0x1000
#define DP_SEC_SIZE 0x1000
/*******************************************************************************
diff --git a/plat/mediatek/mt8195/plat_sip_calls.c b/plat/mediatek/mt8195/plat_sip_calls.c
index 7d3c512..1cdd622 100644
--- a/plat/mediatek/mt8195/plat_sip_calls.c
+++ b/plat/mediatek/mt8195/plat_sip_calls.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ * Copyright (c) 2020-2022, MediaTek Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -32,8 +32,8 @@
ret = dp_secure_handler(x1, x2, &ret_val);
SMC_RET2(handle, ret, ret_val);
break;
- case MTK_SIP_VCORE_CONTROL_ARCH32:
- case MTK_SIP_VCORE_CONTROL_ARCH64:
+ case MTK_SIP_VCORE_CONTROL_AARCH32:
+ case MTK_SIP_VCORE_CONTROL_AARCH64:
ret = spm_vcorefs_v2_args(x1, x2, x3, &x4);
SMC_RET2(handle, ret, x4);
break;
diff --git a/plat/mediatek/mt8195/platform.mk b/plat/mediatek/mt8195/platform.mk
index a81c093..414d655 100644
--- a/plat/mediatek/mt8195/platform.mk
+++ b/plat/mediatek/mt8195/platform.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2021, MediaTek Inc. All rights reserved.
+# Copyright (c) 2021-2022, MediaTek Inc. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -8,22 +8,26 @@
MTK_PLAT_SOC := ${MTK_PLAT}/${PLAT}
PLAT_INCLUDES := -I${MTK_PLAT}/common/ \
- -I${MTK_PLAT}/common/drivers/gic600/ \
- -I${MTK_PLAT}/common/drivers/gpio/ \
- -I${MTK_PLAT}/common/drivers/rtc/ \
- -I${MTK_PLAT}/common/drivers/timer/ \
- -I${MTK_PLAT}/common/drivers/uart/ \
- -I${MTK_PLAT}/common/lpm/ \
+ -I${MTK_PLAT}/drivers/cirq/ \
+ -I${MTK_PLAT}/drivers/dp/ \
+ -I${MTK_PLAT}/drivers/gic600/ \
+ -I${MTK_PLAT}/drivers/gpio/ \
+ -I${MTK_PLAT}/drivers/lpm/ \
+ -I${MTK_PLAT}/drivers/pmic/ \
+ -I${MTK_PLAT}/drivers/pmic_wrap/ \
+ -I${MTK_PLAT}/drivers/rtc/ \
+ -I${MTK_PLAT}/drivers/timer/ \
+ -I${MTK_PLAT}/drivers/uart/ \
+ -I${MTK_PLAT}/include/ \
-I${MTK_PLAT_SOC}/drivers/apusys/ \
-I${MTK_PLAT_SOC}/drivers/dcm \
-I${MTK_PLAT_SOC}/drivers/dfd \
- -I${MTK_PLAT_SOC}/drivers/dp/ \
-I${MTK_PLAT_SOC}/drivers/emi_mpu/ \
-I${MTK_PLAT_SOC}/drivers/gpio/ \
-I${MTK_PLAT_SOC}/drivers/mcdi/ \
-I${MTK_PLAT_SOC}/drivers/pmic/ \
-I${MTK_PLAT_SOC}/drivers/spmc/ \
- -I${MTK_PLAT_SOC}/drivers/ptp3/ \
+ -I${MTK_PLAT_SOC}/drivers/ptp3/ \
-I${MTK_PLAT_SOC}/include/
GICV3_SUPPORT_GIC600 := 1
@@ -45,36 +49,36 @@
lib/cpus/aarch64/cortex_a55.S \
lib/cpus/aarch64/cortex_a78.S \
plat/common/plat_gicv3.c \
- ${MTK_PLAT}/common/drivers/gic600/mt_gic_v3.c \
- ${MTK_PLAT}/common/drivers/gpio/mtgpio_common.c \
- ${MTK_PLAT}/common/drivers/pmic_wrap/pmic_wrap_init_v2.c \
- ${MTK_PLAT}/common/drivers/rtc/rtc_common.c \
- ${MTK_PLAT}/common/drivers/rtc/rtc_mt6359p.c \
- ${MTK_PLAT}/common/drivers/timer/mt_timer.c \
- ${MTK_PLAT}/common/drivers/uart/uart.c \
- ${MTK_PLAT}/common/lpm/mt_lp_rm.c \
- ${MTK_PLAT}/common/mtk_cirq.c \
${MTK_PLAT}/common/mtk_plat_common.c \
${MTK_PLAT}/common/mtk_sip_svc.c \
${MTK_PLAT}/common/params_setup.c \
+ ${MTK_PLAT}/drivers/cirq/mt_cirq.c \
+ ${MTK_PLAT}/drivers/dp/mt_dp.c \
+ ${MTK_PLAT}/drivers/gic600/mt_gic_v3.c \
+ ${MTK_PLAT}/drivers/gpio/mtgpio_common.c \
+ ${MTK_PLAT}/drivers/lpm/mt_lp_rm.c \
+ ${MTK_PLAT}/drivers/pmic/pmic.c \
+ ${MTK_PLAT}/drivers/pmic_wrap/pmic_wrap_init_v2.c \
+ ${MTK_PLAT}/drivers/rtc/rtc_common.c \
+ ${MTK_PLAT}/drivers/rtc/rtc_mt6359p.c \
+ ${MTK_PLAT}/drivers/timer/mt_timer.c \
+ ${MTK_PLAT}/drivers/uart/uart.c \
${MTK_PLAT_SOC}/aarch64/platform_common.c \
${MTK_PLAT_SOC}/aarch64/plat_helpers.S \
${MTK_PLAT_SOC}/bl31_plat_setup.c \
${MTK_PLAT_SOC}/drivers/apusys/apupll.c \
${MTK_PLAT_SOC}/drivers/apusys/apupwr_clkctl.c \
- ${MTK_PLAT_SOC}/drivers/apusys/mtk_apusys.c \
+ ${MTK_PLAT_SOC}/drivers/apusys/mtk_apusys.c \
${MTK_PLAT_SOC}/drivers/dcm/mtk_dcm.c \
${MTK_PLAT_SOC}/drivers/dcm/mtk_dcm_utils.c \
${MTK_PLAT_SOC}/drivers/dfd/plat_dfd.c \
- ${MTK_PLAT_SOC}/drivers/dp/mt_dp.c \
${MTK_PLAT_SOC}/drivers/emi_mpu/emi_mpu.c \
${MTK_PLAT_SOC}/drivers/gpio/mtgpio.c \
${MTK_PLAT_SOC}/drivers/mcdi/mt_cpu_pm.c \
${MTK_PLAT_SOC}/drivers/mcdi/mt_cpu_pm_cpc.c \
${MTK_PLAT_SOC}/drivers/mcdi/mt_mcdi.c \
- ${MTK_PLAT_SOC}/drivers/mcdi/mt_lp_irqremain.c \
+ ${MTK_PLAT_SOC}/drivers/mcdi/mt_lp_irqremain.c \
${MTK_PLAT_SOC}/drivers/gpio/mtgpio.c \
- ${MTK_PLAT_SOC}/drivers/pmic/pmic.c \
${MTK_PLAT_SOC}/drivers/ptp3/mtk_ptp3_main.c \
${MTK_PLAT_SOC}/drivers/spmc/mtspmc.c \
${MTK_PLAT_SOC}/plat_pm.c \
diff --git a/plat/qemu/qemu/include/platform_def.h b/plat/qemu/qemu/include/platform_def.h
index 78467c4..c9ed640 100644
--- a/plat/qemu/qemu/include/platform_def.h
+++ b/plat/qemu/qemu/include/platform_def.h
@@ -84,7 +84,7 @@
#define NS_DRAM0_SIZE ULL(0xc0000000)
#define SEC_SRAM_BASE 0x0e000000
-#define SEC_SRAM_SIZE 0x00060000
+#define SEC_SRAM_SIZE 0x00100000
#define SEC_DRAM_BASE 0x0e100000
#define SEC_DRAM_SIZE 0x00f00000
@@ -146,7 +146,7 @@
* Put BL3-1 at the top of the Trusted SRAM. BL31_BASE is calculated using the
* current BL3-1 debug size plus a little space for growth.
*/
-#define BL31_BASE (BL31_LIMIT - 0x20000)
+#define BL31_BASE (BL31_LIMIT - 0x60000)
#define BL31_LIMIT (BL_RAM_BASE + BL_RAM_SIZE)
#define BL31_PROGBITS_LIMIT BL1_RW_BASE
diff --git a/plat/st/common/bl2_io_storage.c b/plat/st/common/bl2_io_storage.c
index 49f6465..8d0bdcc 100644
--- a/plat/st/common/bl2_io_storage.c
+++ b/plat/st/common/bl2_io_storage.c
@@ -221,6 +221,10 @@
break;
}
+ if (mmc_dev_type != MMC_IS_EMMC) {
+ params.flags = MMC_FLAG_SD_CMD6;
+ }
+
params.device_info = &mmc_info;
if (stm32_sdmmc2_mmc_init(¶ms) != 0) {
ERROR("SDMMC%u init failed\n", boot_interface_instance);
diff --git a/plat/st/stm32mp1/platform.mk b/plat/st/stm32mp1/platform.mk
index b425fa5..7203de8 100644
--- a/plat/st/stm32mp1/platform.mk
+++ b/plat/st/stm32mp1/platform.mk
@@ -357,6 +357,9 @@
endif
ifeq (${STM32MP_SPI_NOR},1)
+ifneq (${STM32MP_FORCE_MTD_START_OFFSET},)
+$(eval $(call add_define_val,STM32MP_NOR_FIP_OFFSET,${STM32MP_FORCE_MTD_START_OFFSET}))
+endif
BL2_SOURCES += drivers/mtd/nor/spi_nor.c
endif
@@ -366,6 +369,9 @@
endif
ifneq ($(filter 1,${STM32MP_RAW_NAND} ${STM32MP_SPI_NAND}),)
+ifneq (${STM32MP_FORCE_MTD_START_OFFSET},)
+$(eval $(call add_define_val,STM32MP_NAND_FIP_OFFSET,${STM32MP_FORCE_MTD_START_OFFSET}))
+endif
BL2_SOURCES += drivers/mtd/nand/core.c
endif
diff --git a/plat/st/stm32mp1/stm32mp1_boot_device.c b/plat/st/stm32mp1/stm32mp1_boot_device.c
index b05de1c..3a8a27a 100644
--- a/plat/st/stm32mp1/stm32mp1_boot_device.c
+++ b/plat/st/stm32mp1/stm32mp1_boot_device.c
@@ -4,6 +4,7 @@
* SPDX-License-Identifier: BSD-3-Clause
*/
+#include <assert.h>
#include <errno.h>
#include <common/debug.h>
@@ -15,9 +16,21 @@
#include <plat/common/platform.h>
#if STM32MP_RAW_NAND || STM32MP_SPI_NAND
+#if STM32MP13
+void plat_get_scratch_buffer(void **buffer_addr, size_t *buf_size)
+{
+ assert(buffer_addr != NULL);
+ assert(buf_size != NULL);
+
+ *buffer_addr = (void *)STM32MP_MTD_BUFFER;
+ *buf_size = PLATFORM_MTD_MAX_PAGE_SIZE;
+}
+#endif
+
static int get_data_from_otp(struct nand_device *nand_dev, bool is_slc)
{
uint32_t nand_param;
+ uint32_t nand2_param __maybe_unused;
/* Check if NAND parameters are stored in OTP */
if (stm32_get_otp_value(NAND_OTP, &nand_param) != 0) {
@@ -26,12 +39,39 @@
}
if (nand_param == 0U) {
+#if STM32MP13
+ if (is_slc) {
+ return 0;
+ }
+#endif
+#if STM32MP15
return 0;
+#endif
}
if ((nand_param & NAND_PARAM_STORED_IN_OTP) == 0U) {
+#if STM32MP13
+ if (is_slc) {
+ goto ecc;
+ }
+#endif
+#if STM32MP15
goto ecc;
+#endif
+ }
+
+#if STM32MP13
+ if (stm32_get_otp_value(NAND2_OTP, &nand2_param) != 0) {
+ ERROR("BSEC: NAND_OTP Error\n");
+ return -EACCES;
+ }
+
+ /* Check OTP configuration for this device */
+ if ((((nand2_param & NAND2_CONFIG_DISTRIB) == NAND2_PNAND_NAND1_SNAND_NAND2) && !is_slc) ||
+ (((nand2_param & NAND2_CONFIG_DISTRIB) == NAND2_PNAND_NAND2_SNAND_NAND1) && is_slc)) {
+ nand_param = nand2_param << (NAND_PAGE_SIZE_SHIFT - NAND2_PAGE_SIZE_SHIFT);
}
+#endif
/* NAND parameter shall be read from OTP */
if ((nand_param & NAND_WIDTH_MASK) != 0U) {
diff --git a/plat/st/stm32mp1/stm32mp1_def.h b/plat/st/stm32mp1/stm32mp1_def.h
index 8ca6123..116bd5d 100644
--- a/plat/st/stm32mp1/stm32mp1_def.h
+++ b/plat/st/stm32mp1/stm32mp1_def.h
@@ -71,6 +71,7 @@
#define STM32MP1_REV_B U(0x2000)
#if STM32MP13
+#define STM32MP1_REV_Y U(0x1003)
#define STM32MP1_REV_Z U(0x1001)
#endif
#if STM32MP15
@@ -193,6 +194,12 @@
/* Define maximum page size for NAND devices */
#define PLATFORM_MTD_MAX_PAGE_SIZE U(0x1000)
+/* Define location for the MTD scratch buffer */
+#if STM32MP13
+#define STM32MP_MTD_BUFFER (SRAM1_BASE + \
+ SRAM1_SIZE - \
+ PLATFORM_MTD_MAX_PAGE_SIZE)
+#endif
/*******************************************************************************
* STM32MP1 device/io map related constants (used for MMU)
******************************************************************************/
@@ -435,7 +442,13 @@
#define PACKAGE_OTP "package_otp"
#endif
#define HW2_OTP "hw2_otp"
+#if STM32MP13
+#define NAND_OTP "cfg9_otp"
+#define NAND2_OTP "cfg10_otp"
+#endif
+#if STM32MP15
#define NAND_OTP "nand_otp"
+#endif
#define MONOTONIC_OTP "monotonic_otp"
#define UID_OTP "uid_otp"
#define BOARD_ID_OTP "board_id"
@@ -495,7 +508,7 @@
#define NAND_BLOCK_SIZE_128_PAGES U(1)
#define NAND_BLOCK_SIZE_256_PAGES U(2)
-/* NAND number of block (in unit of 256 blocs) */
+/* NAND number of block (in unit of 256 blocks) */
#define NAND_BLOCK_NB_MASK GENMASK_32(26, 19)
#define NAND_BLOCK_NB_SHIFT 19
#define NAND_BLOCK_NB_UNIT U(256)
@@ -516,6 +529,14 @@
/* NAND number of planes */
#define NAND_PLANE_BIT_NB_MASK BIT(14)
+/* NAND2 OTP */
+#define NAND2_PAGE_SIZE_SHIFT 16
+
+/* NAND2 config distribution */
+#define NAND2_CONFIG_DISTRIB BIT(0)
+#define NAND2_PNAND_NAND2_SNAND_NAND1 U(0)
+#define NAND2_PNAND_NAND1_SNAND_NAND2 U(1)
+
/* MONOTONIC OTP */
#define MAX_MONOTONIC_VALUE 32
diff --git a/plat/st/stm32mp1/stm32mp1_fip_def.h b/plat/st/stm32mp1/stm32mp1_fip_def.h
index 82e53db..5652597 100644
--- a/plat/st/stm32mp1/stm32mp1_fip_def.h
+++ b/plat/st/stm32mp1/stm32mp1_fip_def.h
@@ -106,7 +106,11 @@
* STM32MP1 RAW partition offset for devices without GPT
******************************************************************************/
#define STM32MP_EMMC_BOOT_FIP_OFFSET U(0x00040000)
+#ifndef STM32MP_NOR_FIP_OFFSET
#define STM32MP_NOR_FIP_OFFSET U(0x00080000)
+#endif
+#ifndef STM32MP_NAND_FIP_OFFSET
#define STM32MP_NAND_FIP_OFFSET U(0x00200000)
+#endif
#endif /* STM32MP1_FIP_DEF_H */
diff --git a/plat/st/stm32mp1/stm32mp1_private.c b/plat/st/stm32mp1/stm32mp1_private.c
index 86b9f23..c40e045 100644
--- a/plat/st/stm32mp1/stm32mp1_private.c
+++ b/plat/st/stm32mp1/stm32mp1_private.c
@@ -493,6 +493,11 @@
case STM32MP1_REV_B:
cpu_r = "B";
break;
+#if STM32MP13
+ case STM32MP1_REV_Y:
+ cpu_r = "Y";
+ break;
+#endif
case STM32MP1_REV_Z:
cpu_r = "Z";
break;
diff --git a/plat/xilinx/zynqmp/pm_service/pm_api_ioctl.c b/plat/xilinx/zynqmp/pm_service/pm_api_ioctl.c
index 8a5a25a..48e1b8d 100644
--- a/plat/xilinx/zynqmp/pm_service/pm_api_ioctl.c
+++ b/plat/xilinx/zynqmp/pm_service/pm_api_ioctl.c
@@ -553,7 +553,7 @@
return PM_RET_ERROR_ARGS;
}
- if (index < AFIFM6_WRCTRL) {
+ if (index <= AFIFM6_WRCTRL) {
mask = FABRIC_WIDTH;
} else {
mask = 0xf00;
diff --git a/services/std_svc/spm/el3_spmc/spmc.mk b/services/std_svc/spm/el3_spmc/spmc.mk
index aa591d9..c674e71 100644
--- a/services/std_svc/spm/el3_spmc/spmc.mk
+++ b/services/std_svc/spm/el3_spmc/spmc.mk
@@ -24,3 +24,21 @@
# Let the top-level Makefile know that we intend to include a BL32 image
NEED_BL32 := yes
+
+ifndef BL32
+# The SPMC is paired with a Test Secure Payload source and we intend to
+# build the Test Secure Payload if no other image has been provided
+# for BL32.
+#
+# In cases where an associated Secure Payload lies outside this build
+# system/source tree, the dispatcher Makefile can either invoke an external
+# build command or assume it is pre-built.
+
+BL32_ROOT := bl32/tsp
+
+# Conditionally include SP's Makefile. The assumption is that the TSP's build
+# system is compatible with that of Trusted Firmware, and it'll add and populate
+# necessary build targets and variables.
+
+include ${BL32_ROOT}/tsp.mk
+endif
diff --git a/services/std_svc/spm/el3_spmc/spmc_shared_mem.c b/services/std_svc/spm/el3_spmc/spmc_shared_mem.c
index 4a24108..eab2096 100644
--- a/services/std_svc/spm/el3_spmc/spmc_shared_mem.c
+++ b/services/std_svc/spm/el3_spmc/spmc_shared_mem.c
@@ -260,6 +260,34 @@
return comp_mrd->address_range_count * sizeof(struct ffa_cons_mrd);
}
+/**
+ * spmc_shmem_obj_validate_id - Validate a partition ID is participating in
+ * a given memory transaction.
+ * @sp_id: Partition ID to validate.
+ * @desc: Descriptor of the memory transaction.
+ *
+ * Return: true if ID is valid, else false.
+ */
+bool spmc_shmem_obj_validate_id(const struct ffa_mtd *desc, uint16_t sp_id)
+{
+ bool found = false;
+
+ /* Validate the partition is a valid participant. */
+ for (unsigned int i = 0U; i < desc->emad_count; i++) {
+ size_t emad_size;
+ struct ffa_emad_v1_0 *emad;
+
+ emad = spmc_shmem_obj_get_emad(desc, i,
+ MAKE_FFA_VERSION(1, 1),
+ &emad_size);
+ if (sp_id == emad->mapd.endpoint_id) {
+ found = true;
+ break;
+ }
+ }
+ return found;
+}
+
/*
* Compare two memory regions to determine if any range overlaps with another
* ongoing memory transaction.
@@ -1403,6 +1431,14 @@
}
}
+ /* Validate the caller is a valid participant. */
+ if (!spmc_shmem_obj_validate_id(&obj->desc, sp_ctx->sp_id)) {
+ WARN("%s: Invalid endpoint ID (0x%x).\n",
+ __func__, sp_ctx->sp_id);
+ ret = FFA_ERROR_INVALID_PARAMETER;
+ goto err_unlock_all;
+ }
+
/* Validate that the provided emad offset and structure is valid.*/
for (size_t i = 0; i < req->emad_count; i++) {
size_t emad_size;
@@ -1657,6 +1693,7 @@
struct mailbox *mbox = spmc_get_mbox_desc(secure_origin);
struct spmc_shmem_obj *obj;
const struct ffa_mem_relinquish_descriptor *req;
+ struct secure_partition_desc *sp_ctx = spmc_get_current_sp_ctx();
if (!secure_origin) {
WARN("%s: unsupported relinquish direction.\n", __func__);
@@ -1694,36 +1731,31 @@
goto err_unlock_all;
}
- if (obj->desc.emad_count != req->endpoint_count) {
- WARN("%s: mismatch of endpoint count %u != %u\n", __func__,
- obj->desc.emad_count, req->endpoint_count);
+ /*
+ * Validate the endpoint ID was populated correctly. We don't currently
+ * support proxy endpoints so the endpoint count should always be 1.
+ */
+ if (req->endpoint_count != 1U) {
+ WARN("%s: unsupported endpoint count %u != 1\n", __func__,
+ req->endpoint_count);
ret = FFA_ERROR_INVALID_PARAMETER;
goto err_unlock_all;
}
- /* Validate requested endpoint IDs match descriptor. */
- for (size_t i = 0; i < req->endpoint_count; i++) {
- bool found = false;
- size_t emad_size;
- struct ffa_emad_v1_0 *emad;
-
- for (unsigned int j = 0; j < obj->desc.emad_count; j++) {
- emad = spmc_shmem_obj_get_emad(&obj->desc, j,
- MAKE_FFA_VERSION(1, 1),
- &emad_size);
- if (req->endpoint_array[i] ==
- emad->mapd.endpoint_id) {
- found = true;
- break;
- }
- }
+ /* Validate provided endpoint ID matches the partition ID. */
+ if (req->endpoint_array[0] != sp_ctx->sp_id) {
+ WARN("%s: invalid endpoint ID %u != %u\n", __func__,
+ req->endpoint_array[0], sp_ctx->sp_id);
+ ret = FFA_ERROR_INVALID_PARAMETER;
+ goto err_unlock_all;
+ }
- if (!found) {
- WARN("%s: Invalid endpoint ID (0x%x).\n",
- __func__, req->endpoint_array[i]);
- ret = FFA_ERROR_INVALID_PARAMETER;
- goto err_unlock_all;
- }
+ /* Validate the caller is a valid participant. */
+ if (!spmc_shmem_obj_validate_id(&obj->desc, sp_ctx->sp_id)) {
+ WARN("%s: Invalid endpoint ID (0x%x).\n",
+ __func__, req->endpoint_array[0]);
+ ret = FFA_ERROR_INVALID_PARAMETER;
+ goto err_unlock_all;
}
if (obj->in_use == 0U) {