diff --git a/fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi b/fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi
index 11e8f2b..c0fc1f7 100644
--- a/fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi
+++ b/fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi
@@ -1,24 +1,23 @@
 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
 /*
  * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
- *
- * STM32MP157C DK1/DK2 BOARD configuration
- * 1x DDR3L 4Gb, 16-bit, 533MHz.
- * Reference used NT5CC256M16DP-DI from NANYA
+ */
+
+/*
+ * File generated by STMicroelectronics STM32CubeMX DDR Tool for MPUs
+ * DDR type: DDR3 / DDR3L
+ * DDR width: 16bits
+ * DDR density: 4Gb
+ * System frequency: 533000Khz
+ * Relaxed Timing Mode: false
+ * Address mapping type: RBC
  *
- * DDR type / Platform	DDR3/3L
- * freq		533MHz
- * width	16
- * datasheet	0  = MT41J256M16-187 / DDR3-1066 bin G
- * DDR density	4
- * timing mode	optimized
- * Scheduling/QoS options : type = 2
- * address mapping : RBC
- * Tc > + 85C : N
+ * Save Date: 2020.02.20, save Time: 18:45:20
  */
-#define DDR_MEM_NAME "DDR3-1066/888 bin G 1x4Gb 533MHz v1.45"
-#define DDR_MEM_SPEED 533000
-#define DDR_MEM_SIZE 0x20000000
+
+#define DDR_MEM_NAME	"DDR3-DDR3L 16bits 533000Khz"
+#define DDR_MEM_SPEED	533000
+#define DDR_MEM_SIZE	0x20000000
 
 #define DDR_MSTR 0x00041401
 #define DDR_MRCTRL0 0x00000010
@@ -50,15 +49,6 @@
 #define DDR_DFIUPD1 0x00000000
 #define DDR_DFIUPD2 0x00000000
 #define DDR_DFIPHYMSTR 0x00000000
-#define DDR_ADDRMAP1 0x00070707
-#define DDR_ADDRMAP2 0x00000000
-#define DDR_ADDRMAP3 0x1F000000
-#define DDR_ADDRMAP4 0x00001F1F
-#define DDR_ADDRMAP5 0x06060606
-#define DDR_ADDRMAP6 0x0F060606
-#define DDR_ADDRMAP9 0x00000000
-#define DDR_ADDRMAP10 0x00000000
-#define DDR_ADDRMAP11 0x00000000
 #define DDR_ODTCFG 0x06000600
 #define DDR_ODTMAP 0x00000001
 #define DDR_SCHED 0x00000C01
@@ -83,6 +73,15 @@
 #define DDR_PCFGQOS1_1 0x00800040
 #define DDR_PCFGWQOS0_1 0x01100C03
 #define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_ADDRMAP1 0x00070707
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x1F000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x06060606
+#define DDR_ADDRMAP6 0x0F060606
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
 #define DDR_PGCR 0x01442E02
 #define DDR_PTR0 0x0022AA5B
 #define DDR_PTR1 0x04841104
diff --git a/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
index 4b70b60..fc226d2 100644
--- a/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
+++ b/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
@@ -1,24 +1,23 @@
 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
 /*
  * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
- *
- * STM32MP157C ED1 BOARD configuration
- * 2x DDR3L 4Gb each, 16-bit, 533MHz, Single Die Package in flyby topology.
- * Reference used NT5CC256M16DP-DI from NANYA
+ */
+
+/*
+ * File generated by STMicroelectronics STM32CubeMX DDR Tool for MPUs
+ * DDR type: DDR3 / DDR3L
+ * DDR width: 32bits
+ * DDR density: 8Gb
+ * System frequency: 533000Khz
+ * Relaxed Timing Mode: false
+ * Address mapping type: RBC
  *
- * DDR type / Platform	DDR3/3L
- * freq		533MHz
- * width	32
- * datasheet	0  = MT41J256M16-187 / DDR3-1066 bin G
- * DDR density	8
- * timing mode	optimized
- * Scheduling/QoS options : type = 2
- * address mapping : RBC
- * Tc > + 85C : N
+ * Save Date: 2020.02.20, save Time: 18:49:33
  */
-#define DDR_MEM_NAME "DDR3-1066/888 bin G 2x4Gb 533MHz v1.45"
-#define DDR_MEM_SPEED 533000
-#define DDR_MEM_SIZE 0x40000000
+
+#define DDR_MEM_NAME	"DDR3-DDR3L 32bits 533000Khz"
+#define DDR_MEM_SPEED	533000
+#define DDR_MEM_SIZE	0x40000000
 
 #define DDR_MSTR 0x00040401
 #define DDR_MRCTRL0 0x00000010
@@ -50,15 +49,6 @@
 #define DDR_DFIUPD1 0x00000000
 #define DDR_DFIUPD2 0x00000000
 #define DDR_DFIPHYMSTR 0x00000000
-#define DDR_ADDRMAP1 0x00080808
-#define DDR_ADDRMAP2 0x00000000
-#define DDR_ADDRMAP3 0x00000000
-#define DDR_ADDRMAP4 0x00001F1F
-#define DDR_ADDRMAP5 0x07070707
-#define DDR_ADDRMAP6 0x0F070707
-#define DDR_ADDRMAP9 0x00000000
-#define DDR_ADDRMAP10 0x00000000
-#define DDR_ADDRMAP11 0x00000000
 #define DDR_ODTCFG 0x06000600
 #define DDR_ODTMAP 0x00000001
 #define DDR_SCHED 0x00000C01
@@ -83,6 +73,15 @@
 #define DDR_PCFGQOS1_1 0x00800040
 #define DDR_PCFGWQOS0_1 0x01100C03
 #define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_ADDRMAP1 0x00080808
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x00000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x07070707
+#define DDR_ADDRMAP6 0x0F070707
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
 #define DDR_PGCR 0x01442E02
 #define DDR_PTR0 0x0022AA5B
 #define DDR_PTR1 0x04841104
diff --git a/fdts/stm32mp15-pinctrl.dtsi b/fdts/stm32mp15-pinctrl.dtsi
new file mode 100644
index 0000000..d3d1744
--- /dev/null
+++ b/fdts/stm32mp15-pinctrl.dtsi
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+	fmc_pins_a: fmc-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+				 <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
+				 <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
+				 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+				 <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
+			bias-pull-up;
+		};
+	};
+
+	qspi_clk_pins_a: qspi-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+
+	qspi_bk1_pins_a: qspi-bk1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_bk2_pins_a: qspi-bk2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+				 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+				 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+				 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	rtc_out2_rmp_pins_a: rtc-out2-rmp-pins-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 8, ANALOG)>; /* RTC_OUT2_RMP */
+		};
+	};
+
+	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_pins_b: sdmmc2-b4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	uart4_pins_a: uart4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_pins_b: uart4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
+				 <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
+				 <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_b: uart7-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* USART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* USART7_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_pins_a: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 5, AF7)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart3_pins_a: usart3-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+				 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart3_pins_b: usart3-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+				 <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usbotg_hs_pins_a: usbotg_hs-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
+		};
+	};
+
+	usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* OTG_FS_DM */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* OTG_FS_DP */
+		};
+	};
+};
+
+&pinctrl_z {
+	i2c4_pins_a: i2c4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+				 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+};
diff --git a/fdts/stm32mp151.dtsi b/fdts/stm32mp151.dtsi
new file mode 100644
index 0000000..2eb4a39
--- /dev/null
+++ b/fdts/stm32mp151.dtsi
@@ -0,0 +1,612 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp1-clks.h>
+#include <dt-bindings/reset/stm32mp1-resets.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	intc: interrupt-controller@a0021000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xa0021000 0x1000>,
+		      <0xa0022000 0x2000>;
+	};
+
+	clocks {
+		clk_hse: clk-hse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		clk_hsi: clk-hsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <64000000>;
+		};
+
+		clk_lse: clk-lse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		clk_lsi: clk-lsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+		};
+
+		clk_csi: clk-csi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <4000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		timers12: timer@40006000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40006000 0x400>;
+			clocks = <&rcc TIM12_K>;
+			clock-names = "int";
+			status = "disabled";
+		};
+
+		usart2: serial@4000e000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4000e000 0x400>;
+			interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART2_K>;
+			resets = <&rcc USART2_R>;
+			status = "disabled";
+		};
+
+		usart3: serial@4000f000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4000f000 0x400>;
+			interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART3_K>;
+			resets = <&rcc USART3_R>;
+			status = "disabled";
+		};
+
+		uart4: serial@40010000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40010000 0x400>;
+			interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART4_K>;
+			resets = <&rcc UART4_R>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		uart5: serial@40011000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART5_K>;
+			resets = <&rcc UART5_R>;
+			status = "disabled";
+		};
+
+		uart7: serial@40018000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40018000 0x400>;
+			interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART7_K>;
+			resets = <&rcc UART7_R>;
+			status = "disabled";
+		};
+
+		uart8: serial@40019000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40019000 0x400>;
+			interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART8_K>;
+			resets = <&rcc UART8_R>;
+			status = "disabled";
+		};
+
+		usart6: serial@44003000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x44003000 0x400>;
+			interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART6_K>;
+			resets = <&rcc USART6_R>;
+			status = "disabled";
+		};
+
+		timers15: timer@44006000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x44006000 0x400>;
+			clocks = <&rcc TIM15_K>;
+			clock-names = "int";
+			status = "disabled";
+		};
+
+		usbotg_hs: usb-otg@49000000 {
+			compatible = "st,stm32mp1-hsotg", "snps,dwc2";
+			reg = <0x49000000 0x10000>;
+			clocks = <&rcc USBO_K>;
+			clock-names = "otg";
+			resets = <&rcc USBO_R>;
+			reset-names = "dwc2";
+			interrupts-extended = <&exti 44 IRQ_TYPE_LEVEL_HIGH>;
+			g-rx-fifo-size = <512>;
+			g-np-tx-fifo-size = <32>;
+			g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+			dr_mode = "otg";
+			usb33d-supply = <&usb33>;
+			status = "disabled";
+		};
+
+		rcc: rcc@50000000 {
+			compatible = "st,stm32mp1-rcc", "syscon";
+			reg = <0x50000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			secure-interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			secure-interrupt-names = "wakeup";
+		};
+
+		pwr_regulators: pwr@50001000 {
+			compatible = "st,stm32mp1,pwr-reg";
+			reg = <0x50001000 0x10>;
+			st,tzcr = <&rcc 0x0 0x1>;
+
+			reg11: reg11 {
+				regulator-name = "reg11";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			reg18: reg18 {
+				regulator-name = "reg18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			usb33: usb33 {
+				regulator-name = "usb33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+
+		pwr_mcu: pwr_mcu@50001014 {
+			compatible = "st,stm32mp151-pwr-mcu", "syscon";
+			reg = <0x50001014 0x4>;
+		};
+
+		pwr_irq: pwr@50001020 {
+			compatible = "st,stm32mp1-pwr";
+			reg = <0x50001020 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		exti: interrupt-controller@5000d000 {
+			compatible = "st,stm32mp1-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x5000d000 0x400>;
+
+			/* exti_pwr is an extra interrupt controller used for
+			 * EXTI 55 to 60. It's mapped on pwr interrupt
+			 * controller.
+			 */
+			exti_pwr: exti-pwr {
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupt-parent = <&pwr_irq>;
+				st,irq-number = <6>;
+			};
+		};
+
+		syscfg: syscon@50020000 {
+			compatible = "st,stm32mp157-syscfg", "syscon";
+			reg = <0x50020000 0x400>;
+			clocks = <&rcc SYSCFG>;
+		};
+
+		hash1: hash@54002000 {
+			compatible = "st,stm32f756-hash";
+			reg = <0x54002000 0x400>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc HASH1>;
+			resets = <&rcc HASH1_R>;
+			status = "disabled";
+		};
+
+		rng1: rng@54003000 {
+			compatible = "st,stm32-rng";
+			reg = <0x54003000 0x400>;
+			clocks = <&rcc RNG1_K>;
+			resets = <&rcc RNG1_R>;
+			status = "disabled";
+		};
+
+		fmc: nand-controller@58002000 {
+			compatible = "st,stm32mp15-fmc2";
+			reg = <0x58002000 0x1000>,
+			      <0x80000000 0x1000>,
+			      <0x88010000 0x1000>,
+			      <0x88020000 0x1000>,
+			      <0x81000000 0x1000>,
+			      <0x89010000 0x1000>,
+			      <0x89020000 0x1000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc FMC_K>;
+			resets = <&rcc FMC_R>;
+			status = "disabled";
+		};
+
+		qspi: spi@58003000 {
+			compatible = "st,stm32f469-qspi";
+			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+			reg-names = "qspi", "qspi_mm";
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc QSPI_K>;
+			resets = <&rcc QSPI_R>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdmmc@58005000 {
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00253180>;
+			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC1_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC1_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		sdmmc2: sdmmc@58007000 {
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00253180>;
+			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC2_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC2_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		iwdg2: watchdog@5a002000 {
+			compatible = "st,stm32mp1-iwdg";
+			reg = <0x5a002000 0x400>;
+			secure-interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+			clock-names = "pclk", "lsi";
+			status = "disabled";
+		};
+
+		usbphyc: usbphyc@5a006000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <0>;
+			compatible = "st,stm32mp1-usbphyc";
+			reg = <0x5a006000 0x1000>;
+			clocks = <&rcc USBPHY_K>;
+			resets = <&rcc USBPHY_R>;
+			vdda1v1-supply = <&reg11>;
+			vdda1v8-supply = <&reg18>;
+			status = "disabled";
+
+			usbphyc_port0: usb-phy@0 {
+				#phy-cells = <0>;
+				reg = <0>;
+			};
+
+			usbphyc_port1: usb-phy@1 {
+				#phy-cells = <1>;
+				reg = <1>;
+			};
+		};
+
+		usart1: serial@5c000000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x5c000000 0x400>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART1_K>;
+			resets = <&rcc USART1_R>;
+			status = "disabled";
+		};
+
+		spi6: spi@5c001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x5c001000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI6_K>;
+			resets = <&rcc SPI6_R>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@5c002000 {
+			compatible = "st,stm32mp15-i2c";
+			reg = <0x5c002000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts-extended = <&exti 24 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C4_K>;
+			resets = <&rcc I2C4_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x8>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		iwdg1: watchdog@5c003000 {
+			compatible = "st,stm32mp1-iwdg";
+			reg = <0x5C003000 0x400>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc IWDG1>, <&rcc CK_LSI>;
+			clock-names = "pclk", "lsi";
+			status = "disabled";
+		};
+
+		rtc: rtc@5c004000 {
+			compatible = "st,stm32mp1-rtc";
+			reg = <0x5c004000 0x400>;
+			clocks = <&rcc RTCAPB>, <&rcc RTC>;
+			clock-names = "pclk", "rtc_ck";
+			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		bsec: nvmem@5c005000 {
+			compatible = "st,stm32mp15-bsec";
+			reg = <0x5c005000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ts_cal1: calib@5c {
+				reg = <0x5c 0x2>;
+			};
+			ts_cal2: calib@5e {
+				reg = <0x5e 0x2>;
+			};
+		};
+
+		etzpc: etzpc@5c007000 {
+			compatible = "st,stm32-etzpc";
+			reg = <0x5C007000 0x400>;
+			clocks = <&rcc TZPC>;
+			status = "disabled";
+			secure-status = "okay";
+		};
+
+		stgen: stgen@5c008000 {
+			compatible = "st,stm32-stgen";
+			reg = <0x5C008000 0x1000>;
+		};
+
+		i2c6: i2c@5c009000 {
+			compatible = "st,stm32mp15-i2c";
+			reg = <0x5c009000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts-extended = <&exti 54 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C6_K>;
+			resets = <&rcc I2C6_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x20>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		tamp: tamp@5c00a000 {
+			compatible = "st,stm32-tamp", "simple-bus", "syscon", "simple-mfd";
+			reg = <0x5c00a000 0x400>;
+			secure-interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc RTCAPB>;
+		};
+
+		/*
+		 * Break node order to solve dependency probe issue between
+		 * pinctrl and exti.
+		 */
+		pinctrl: pin-controller@50002000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp157-pinctrl";
+			ranges = <0 0x50002000 0xa400>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+			pins-are-numbered;
+
+			gpioa: gpio@50002000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc GPIOA>;
+				st,bank-name = "GPIOA";
+				status = "disabled";
+			};
+
+			gpiob: gpio@50003000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc GPIOB>;
+				st,bank-name = "GPIOB";
+				status = "disabled";
+			};
+
+			gpioc: gpio@50004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc GPIOC>;
+				st,bank-name = "GPIOC";
+				status = "disabled";
+			};
+
+			gpiod: gpio@50005000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x400>;
+				clocks = <&rcc GPIOD>;
+				st,bank-name = "GPIOD";
+				status = "disabled";
+			};
+
+			gpioe: gpio@50006000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x400>;
+				clocks = <&rcc GPIOE>;
+				st,bank-name = "GPIOE";
+				status = "disabled";
+			};
+
+			gpiof: gpio@50007000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x400>;
+				clocks = <&rcc GPIOF>;
+				st,bank-name = "GPIOF";
+				status = "disabled";
+			};
+
+			gpiog: gpio@50008000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x400>;
+				clocks = <&rcc GPIOG>;
+				st,bank-name = "GPIOG";
+				status = "disabled";
+			};
+
+			gpioh: gpio@50009000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x400>;
+				clocks = <&rcc GPIOH>;
+				st,bank-name = "GPIOH";
+				status = "disabled";
+			};
+
+			gpioi: gpio@5000a000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x400>;
+				clocks = <&rcc GPIOI>;
+				st,bank-name = "GPIOI";
+				status = "disabled";
+			};
+
+			gpioj: gpio@5000b000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x400>;
+				clocks = <&rcc GPIOJ>;
+				st,bank-name = "GPIOJ";
+				status = "disabled";
+			};
+
+			gpiok: gpio@5000c000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xa000 0x400>;
+				clocks = <&rcc GPIOK>;
+				st,bank-name = "GPIOK";
+				status = "disabled";
+			};
+		};
+
+		pinctrl_z: pin-controller-z@54004000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp157-z-pinctrl";
+			ranges = <0 0x54004000 0x400>;
+			pins-are-numbered;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+
+			gpioz: gpio@54004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x400>;
+				clocks = <&rcc GPIOZ>;
+				st,bank-name = "GPIOZ";
+				st,bank-ioport = <11>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/fdts/stm32mp153.dtsi b/fdts/stm32mp153.dtsi
new file mode 100644
index 0000000..0a0bb8d
--- /dev/null
+++ b/fdts/stm32mp153.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp151.dtsi"
+
+/ {
+	cpus {
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&rcc CK_MPU>;
+			clock-names = "cpu";
+		};
+	};
+};
diff --git a/fdts/stm32mp157-pinctrl.dtsi b/fdts/stm32mp157-pinctrl.dtsi
deleted file mode 100644
index 7fd902b..0000000
--- a/fdts/stm32mp157-pinctrl.dtsi
+++ /dev/null
@@ -1,373 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2017-2019 - All Rights Reserved
- * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
- */
-#include <dt-bindings/pinctrl/stm32-pinfunc.h>
-
-/ {
-	soc {
-		pinctrl: pin-controller@50002000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32mp157-pinctrl";
-			ranges = <0 0x50002000 0xa400>;
-			pins-are-numbered;
-
-			gpioa: gpio@50002000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x400>;
-				clocks = <&rcc GPIOA>;
-				st,bank-name = "GPIOA";
-				status = "disabled";
-			};
-
-			gpiob: gpio@50003000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x400>;
-				clocks = <&rcc GPIOB>;
-				st,bank-name = "GPIOB";
-				status = "disabled";
-			};
-
-			gpioc: gpio@50004000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x400>;
-				clocks = <&rcc GPIOC>;
-				st,bank-name = "GPIOC";
-				status = "disabled";
-			};
-
-			gpiod: gpio@50005000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x3000 0x400>;
-				clocks = <&rcc GPIOD>;
-				st,bank-name = "GPIOD";
-				status = "disabled";
-			};
-
-			gpioe: gpio@50006000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x4000 0x400>;
-				clocks = <&rcc GPIOE>;
-				st,bank-name = "GPIOE";
-				status = "disabled";
-			};
-
-			gpiof: gpio@50007000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x5000 0x400>;
-				clocks = <&rcc GPIOF>;
-				st,bank-name = "GPIOF";
-				status = "disabled";
-			};
-
-			gpiog: gpio@50008000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x6000 0x400>;
-				clocks = <&rcc GPIOG>;
-				st,bank-name = "GPIOG";
-				status = "disabled";
-			};
-
-			gpioh: gpio@50009000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x7000 0x400>;
-				clocks = <&rcc GPIOH>;
-				st,bank-name = "GPIOH";
-				status = "disabled";
-			};
-
-			gpioi: gpio@5000a000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x8000 0x400>;
-				clocks = <&rcc GPIOI>;
-				st,bank-name = "GPIOI";
-				status = "disabled";
-			};
-
-			gpioj: gpio@5000b000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x9000 0x400>;
-				clocks = <&rcc GPIOJ>;
-				st,bank-name = "GPIOJ";
-				status = "disabled";
-			};
-
-			gpiok: gpio@5000c000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0xa000 0x400>;
-				clocks = <&rcc GPIOK>;
-				st,bank-name = "GPIOK";
-				status = "disabled";
-			};
-
-			fmc_pins_a: fmc-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
-						 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
-						 <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
-						 <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
-						 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
-						 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
-						 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
-						 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
-						 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
-						 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
-						 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
-						 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
-						 <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
-					bias-pull-up;
-				};
-			};
-
-			qspi_bk1_pins_a: qspi-bk1-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
-						 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
-						 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
-						 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
-					bias-pull-up;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-			};
-
-			qspi_bk2_pins_a: qspi-bk2-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
-						 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
-						 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
-						 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
-					bias-pull-up;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-			};
-
-			qspi_clk_pins_a: qspi-clk-0 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <3>;
-				};
-			};
-
-			sdmmc1_b4_pins_a: sdmmc1-b4-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
-						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
-						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
-						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
-						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
-					slew-rate = <1>;
-					drive-push-pull;
-					bias-disable;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
-					slew-rate = <2>;
-					drive-push-pull;
-					bias-disable;
-				};
-			};
-
-			sdmmc1_dir_pins_a: sdmmc1-dir-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
-						 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
-						 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
-					slew-rate = <1>;
-					drive-push-pull;
-					bias-pull-up;
-				};
-				pins2{
-					pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
-					bias-pull-up;
-				};
-			};
-
-			sdmmc2_b4_pins_a: sdmmc2-b4-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
-						 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
-						 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
-						 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
-						 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
-					slew-rate = <1>;
-					drive-push-pull;
-					bias-pull-up;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
-					slew-rate = <2>;
-					drive-push-pull;
-					bias-pull-up;
-				};
-			};
-
-			sdmmc2_d47_pins_a: sdmmc2-d47-0 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
-						 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
-						 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
-						 <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
-					slew-rate = <1>;
-					drive-push-pull;
-					bias-pull-up;
-				};
-			};
-
-			uart4_pins_a: uart4-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-					bias-disable;
-				};
-			};
-
-			uart4_pins_b: uart4-1 {
-				pins1 {
-					pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-					bias-disable;
-				};
-			};
-
-			uart7_pins_a: uart7-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('E', 8, AF7)>; /* USART7_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('E', 7, AF7)>; /* USART7_RX */
-					bias-disable;
-				};
-			};
-
-			usart3_pins_a: usart3-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
-						 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
-						 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
-					bias-disable;
-				};
-			};
-
-			usart3_pins_b: usart3-1 {
-				pins1 {
-					pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
-						 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
-						 <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
-					bias-disable;
-				};
-			};
-		};
-
-		pinctrl_z: pin-controller-z@54004000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32mp157-z-pinctrl";
-			ranges = <0 0x54004000 0x400>;
-			pins-are-numbered;
-
-			gpioz: gpio@54004000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0 0x400>;
-				clocks = <&rcc GPIOZ>;
-				st,bank-name = "GPIOZ";
-				st,bank-ioport = <11>;
-				status = "disabled";
-			};
-
-			i2c4_pins_a: i2c4-0 {
-				pins {
-					pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
-						 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-		};
-	};
-};
diff --git a/fdts/stm32mp157.dtsi b/fdts/stm32mp157.dtsi
new file mode 100644
index 0000000..c834029
--- /dev/null
+++ b/fdts/stm32mp157.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp153.dtsi"
diff --git a/fdts/stm32mp157a-avenger96.dts b/fdts/stm32mp157a-avenger96.dts
index 907940c..b967736 100644
--- a/fdts/stm32mp157a-avenger96.dts
+++ b/fdts/stm32mp157a-avenger96.dts
@@ -9,21 +9,30 @@
 
 /dts-v1/;
 
-#include "stm32mp157c.dtsi"
-#include "stm32mp157cac-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
 
 / {
 	model = "Arrow Electronics STM32MP157A Avenger96 board";
-	compatible = "st,stm32mp157a-avenger96", "st,stm32mp157";
+	compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157";
 
 	aliases {
+		mmc0 = &sdmmc1;
 		serial0 = &uart4;
+		serial1 = &uart7;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x40000000>;
+	};
 };
 
 &i2c4 {
@@ -43,16 +52,17 @@
 
 		st,main-control-register = <0x04>;
 		st,vin-control-register = <0xc0>;
-		st,usb-control-register = <0x20>;
+		st,usb-control-register = <0x30>;
 
 		regulators {
 			compatible = "st,stpmic1-regulators";
-
 			ldo1-supply = <&v3v3>;
 			ldo2-supply = <&v3v3>;
 			ldo3-supply = <&vdd_ddr>;
 			ldo5-supply = <&v3v3>;
 			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
 
 			vddcore: buck1 {
 				regulator-name = "vddcore";
@@ -135,6 +145,19 @@
 				regulator-always-on;
 				regulator-over-current-protection;
 			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				regulator-active-discharge = <1>;
+			};
 		};
 	};
 };
@@ -142,56 +165,14 @@
 &iwdg2 {
 	timeout-sec = <32>;
 	status = "okay";
-};
-
-&rng1 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sdmmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
-	broken-cd;
-	st,sig-dir;
-	st,neg-edge;
-	st,use-ckin;
-	bus-width = <4>;
-	vmmc-supply = <&vdda>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_b>;
-	status = "okay";
+	secure-status = "okay";
 };
 
-/* ATF Specific */
-#include <dt-bindings/clock/stm32mp1-clksrc.h>
-#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
-#include "stm32mp157c-security.dtsi"
-
-/ {
-	aliases {
-		gpio0 = &gpioa;
-		gpio1 = &gpiob;
-		gpio2 = &gpioc;
-		gpio3 = &gpiod;
-		gpio4 = &gpioe;
-		gpio5 = &gpiof;
-		gpio6 = &gpiog;
-		gpio7 = &gpioh;
-		gpio8 = &gpioi;
-		gpio25 = &gpioz;
-		i2c3 = &i2c4;
-	};
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
 };
 
-/* CLOCK init */
 &rcc {
 	secure-status = "disabled";
 	st,clksrc = <
@@ -260,24 +241,67 @@
 
 	/* VCO = 1300.0 MHz => P = 650 (CPU) */
 	pll1: st,pll@0 {
-		cfg = < 2 80 0 0 0 PQR(1,0,0) >;
-		frac = < 0x800 >;
+		compatible = "st,stm32mp1-pll";
+		reg = <0>;
+		cfg = <2 80 0 0 0 PQR(1,0,0)>;
+		frac = <0x800>;
 	};
 
 	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
 	pll2: st,pll@1 {
-		cfg = < 2 65 1 0 0 PQR(1,1,1) >;
-		frac = < 0x1400 >;
+		compatible = "st,stm32mp1-pll";
+		reg = <1>;
+		cfg = <2 65 1 0 0 PQR(1,1,1)>;
+		frac = <0x1400>;
 	};
 
 	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
 	pll3: st,pll@2 {
-		cfg = < 1 33 1 16 36 PQR(1,1,1) >;
-		frac = < 0x1a04 >;
+		compatible = "st,stm32mp1-pll";
+		reg = <2>;
+		cfg = <1 33 1 16 36 PQR(1,1,1)>;
+		frac = <0x1a04>;
 	};
 
 	/* VCO = 480.0 MHz => P = 120, Q = 40, R = 96 */
 	pll4: st,pll@3 {
-		cfg = < 1 39 3 11 4 PQR(1,1,1) >;
+		compatible = "st,stm32mp1-pll";
+		reg = <3>;
+		cfg = <1 39 3 11 4 PQR(1,1,1)>;
 	};
 };
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	status = "okay";
+};
+
+&uart4 {
+	/* On Low speed expansion header */
+	label = "LS-UART1";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_b>;
+	status = "okay";
+};
+
+&uart7 {
+	/* On Low speed expansion header */
+	label = "LS-UART0";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
diff --git a/fdts/stm32mp157a-dk1.dts b/fdts/stm32mp157a-dk1.dts
index 4ea83f7..a73bef8 100644
--- a/fdts/stm32mp157a-dk1.dts
+++ b/fdts/stm32mp157a-dk1.dts
@@ -1,13 +1,15 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
- * Copyright (C) STMicroelectronics 2018-2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>.
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
  */
 
 /dts-v1/;
 
-#include "stm32mp157c.dtsi"
-#include "stm32mp157cac-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
@@ -22,290 +24,4 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
-
-};
-
-&clk_hse {
-	st,digbypass;
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins_a>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-
-	pmic: stpmic@33 {
-		compatible = "st,stpmic1";
-		reg = <0x33>;
-		interrupts-extended = <&exti_pwr 55 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		status = "okay";
-
-		st,main-control-register = <0x04>;
-		st,vin-control-register = <0xc0>;
-		st,usb-control-register = <0x20>;
-
-		regulators {
-			compatible = "st,stpmic1-regulators";
-
-			ldo1-supply = <&v3v3>;
-			ldo3-supply = <&vdd_ddr>;
-			ldo6-supply = <&v3v3>;
-
-			vddcore: buck1 {
-				regulator-name = "vddcore";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd_ddr: buck2 {
-				regulator-name = "vdd_ddr";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd: buck3 {
-				regulator-name = "vdd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				st,mask-reset;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			v3v3: buck4 {
-				regulator-name = "v3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-				regulator-initial-mode = <0>;
-			};
-
-			v1v8_audio: ldo1 {
-				regulator-name = "v1v8_audio";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			v3v3_hdmi: ldo2 {
-				regulator-name = "v3v3_hdmi";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vtt_ddr: ldo3 {
-				regulator-name = "vtt_ddr";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <750000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-
-			vdd_usb: ldo4 {
-				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdda: ldo5 {
-				regulator-name = "vdda";
-				regulator-min-microvolt = <2900000>;
-				regulator-max-microvolt = <2900000>;
-				regulator-boot-on;
-			};
-
-			v1v2_hdmi: ldo6 {
-				regulator-name = "v1v2_hdmi";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vref_ddr: vref_ddr {
-				regulator-name = "vref_ddr";
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-		};
-	};
-};
-
-&iwdg2 {
-	timeout-sec = <32>;
-	status = "okay";
-};
-
-&pwr {
-	pwr-regulators {
-		vdd-supply = <&vdd>;
-	};
-};
-
-&rng1 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sdmmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc1_b4_pins_a>;
-	broken-cd;
-	st,neg-edge;
-	bus-width = <4>;
-	vmmc-supply = <&v3v3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_a>;
-	status = "okay";
-};
-
-&uart7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart7_pins_a>;
-	status = "disabled";
-};
-
-&usart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usart3_pins_b>;
-	status = "disabled";
-};
-
-/* ATF Specific */
-#include <dt-bindings/clock/stm32mp1-clksrc.h>
-#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
-#include "stm32mp157c-security.dtsi"
-
-/ {
-	aliases {
-		gpio0 = &gpioa;
-		gpio1 = &gpiob;
-		gpio2 = &gpioc;
-		gpio3 = &gpiod;
-		gpio4 = &gpioe;
-		gpio5 = &gpiof;
-		gpio6 = &gpiog;
-		gpio7 = &gpioh;
-		gpio8 = &gpioi;
-		gpio25 = &gpioz;
-		i2c3 = &i2c4;
-	};
-};
-
-/* CLOCK init */
-&rcc {
-	secure-status = "disabled";
-	st,clksrc = <
-		CLK_MPU_PLL1P
-		CLK_AXI_PLL2P
-		CLK_MCU_PLL3P
-		CLK_PLL12_HSE
-		CLK_PLL3_HSE
-		CLK_PLL4_HSE
-		CLK_RTC_LSE
-		CLK_MCO1_DISABLED
-		CLK_MCO2_DISABLED
-	>;
-
-	st,clkdiv = <
-		1 /*MPU*/
-		0 /*AXI*/
-		0 /*MCU*/
-		1 /*APB1*/
-		1 /*APB2*/
-		1 /*APB3*/
-		1 /*APB4*/
-		2 /*APB5*/
-		23 /*RTC*/
-		0 /*MCO1*/
-		0 /*MCO2*/
-	>;
-
-	st,pkcs = <
-		CLK_CKPER_HSE
-		CLK_FMC_ACLK
-		CLK_QSPI_ACLK
-		CLK_ETH_DISABLED
-		CLK_SDMMC12_PLL4P
-		CLK_DSI_DSIPLL
-		CLK_STGEN_HSE
-		CLK_USBPHY_HSE
-		CLK_SPI2S1_PLL3Q
-		CLK_SPI2S23_PLL3Q
-		CLK_SPI45_HSI
-		CLK_SPI6_HSI
-		CLK_I2C46_HSI
-		CLK_SDMMC3_PLL4P
-		CLK_USBO_USBPHY
-		CLK_ADC_CKPER
-		CLK_CEC_LSE
-		CLK_I2C12_HSI
-		CLK_I2C35_HSI
-		CLK_UART1_HSI
-		CLK_UART24_HSI
-		CLK_UART35_HSI
-		CLK_UART6_HSI
-		CLK_UART78_HSI
-		CLK_SPDIF_PLL4P
-		CLK_FDCAN_PLL4R
-		CLK_SAI1_PLL3Q
-		CLK_SAI2_PLL3Q
-		CLK_SAI3_PLL3Q
-		CLK_SAI4_PLL3Q
-		CLK_RNG1_LSI
-		CLK_RNG2_LSI
-		CLK_LPTIM1_PCLK1
-		CLK_LPTIM23_PCLK3
-		CLK_LPTIM45_LSE
-	>;
-
-	/* VCO = 1300.0 MHz => P = 650 (CPU) */
-	pll1: st,pll@0 {
-		cfg = < 2 80 0 0 0 PQR(1,0,0) >;
-		frac = < 0x800 >;
-	};
-
-	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
-	pll2: st,pll@1 {
-		cfg = < 2 65 1 0 0 PQR(1,1,1) >;
-		frac = < 0x1400 >;
-	};
-
-	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
-	pll3: st,pll@2 {
-		cfg = < 1 33 1 16 36 PQR(1,1,1) >;
-		frac = < 0x1a04 >;
-	};
-
-	/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
-	pll4: st,pll@3 {
-		cfg = < 3 98 5 7 7 PQR(1,1,1) >;
-	};
-};
-
-&bsec {
-	board_id: board_id@ec {
-		reg = <0xec 0x4>;
-		status = "okay";
-		secure-status = "okay";
-	};
 };
diff --git a/fdts/stm32mp157c-dk2.dts b/fdts/stm32mp157c-dk2.dts
index fdcf4c8..be8300e 100644
--- a/fdts/stm32mp157c-dk2.dts
+++ b/fdts/stm32mp157c-dk2.dts
@@ -1,16 +1,33 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
- * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>.
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
  */
 
 /dts-v1/;
 
-#include "stm32mp157a-dk1.dts"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
 	compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
 
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart7;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
+&cryp1 {
+	status = "okay";
+};
diff --git a/fdts/stm32mp157c-ed1.dts b/fdts/stm32mp157c-ed1.dts
index 7794925..615e2cc 100644
--- a/fdts/stm32mp157c-ed1.dts
+++ b/fdts/stm32mp157c-ed1.dts
@@ -5,8 +5,12 @@
  */
 /dts-v1/;
 
-#include "stm32mp157c.dtsi"
-#include "stm32mp157caa-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157C eval daughter";
@@ -16,20 +20,47 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x40000000>;
+	};
+
 	aliases {
 		serial0 = &uart4;
 	};
 };
 
+&bsec {
+	board_id: board_id@ec {
+		reg = <0xec 0x4>;
+		status = "okay";
+		secure-status = "okay";
+	};
+};
+
 &clk_hse {
 	st,digbypass;
 };
 
+&cpu0 {
+	cpu-supply = <&vddcore>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcore>;
+};
+
+&cryp1 {
+	status="okay";
+};
+
 &i2c4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c4_pins_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
 	status = "okay";
 
 	pmic: stpmic@33 {
@@ -40,18 +71,15 @@
 		#interrupt-cells = <2>;
 		status = "okay";
 
-		st,main-control-register = <0x04>;
-		st,vin-control-register = <0xc0>;
-		st,usb-control-register = <0x20>;
-
 		regulators {
 			compatible = "st,stpmic1-regulators";
-
 			ldo1-supply = <&v3v3>;
 			ldo2-supply = <&v3v3>;
 			ldo3-supply = <&vdd_ddr>;
 			ldo5-supply = <&v3v3>;
 			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
 
 			vddcore: buck1 {
 				regulator-name = "vddcore";
@@ -112,8 +140,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 			};
 
 			vdd_sd: ldo5 {
@@ -132,92 +158,45 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
-		};
-	};
-};
-
-&iwdg2 {
-	timeout-sec = <32>;
-	status = "okay";
-};
 
-&pwr {
-	pwr-regulators {
-		vdd-supply = <&vdd>;
-	};
-};
+			bst_out: boost {
+				regulator-name = "bst_out";
+			};
 
-&rng1 {
-	status = "okay";
-};
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+			 };
 
-&rtc {
-	status = "okay";
-};
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				regulator-active-discharge = <1>;
+			 };
+		};
 
-&sdmmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
-	broken-cd;
-	st,sig-dir;
-	st,neg-edge;
-	st,use-ckin;
-	bus-width = <4>;
-	vmmc-supply = <&vdd_sd>;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-ddr50;
-	sd-uhs-sdr104;
-	status = "okay";
-};
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
 
-&sdmmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
-	non-removable;
-	no-sd;
-	no-sdio;
-	st,neg-edge;
-	bus-width = <8>;
-	vmmc-supply = <&v3v3>;
-	vqmmc-supply = <&v3v3>;
-	mmc-ddr-3_3v;
-	status = "okay";
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
 };
 
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_a>;
+&iwdg2 {
+	timeout-sec = <32>;
 	status = "okay";
 };
 
-/* ATF Specific */
-#include <dt-bindings/clock/stm32mp1-clksrc.h>
-#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
-#include "stm32mp157c-security.dtsi"
-
-/ {
-	aliases {
-		gpio0 = &gpioa;
-		gpio1 = &gpiob;
-		gpio2 = &gpioc;
-		gpio3 = &gpiod;
-		gpio4 = &gpioe;
-		gpio5 = &gpiof;
-		gpio6 = &gpiog;
-		gpio7 = &gpioh;
-		gpio8 = &gpioi;
-		gpio9 = &gpioj;
-		gpio10 = &gpiok;
-		gpio25 = &gpioz;
-		i2c3 = &i2c4;
-	};
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
 };
 
-/* CLOCK init */
 &rcc {
 	secure-status = "disabled";
 	st,clksrc = <
@@ -308,10 +287,46 @@
 	};
 };
 
-&bsec {
-	board_id: board_id@ec {
-		reg = <0xec 0x4>;
-		status = "okay";
-		secure-status = "okay";
-	};
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+	disable-wp;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
 };
diff --git a/fdts/stm32mp157c-security.dtsi b/fdts/stm32mp157c-security.dtsi
deleted file mode 100644
index 165ffa0..0000000
--- a/fdts/stm32mp157c-security.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (c) 2017-2019, STMicroelectronics - All Rights Reserved
- *
- * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
- */
-
-/ {
-	soc {
-		stgen: stgen@5c008000 {
-			compatible = "st,stm32-stgen";
-			reg = <0x5C008000 0x1000>;
-			status = "okay";
-		};
-	};
-};
-
-&bsec {
-	mac_addr: mac_addr@e4 {
-		reg = <0xe4 0x6>;
-		status = "okay";
-		secure-status = "okay";
-	};
-	/* Spare field to align on 32-bit OTP granularity  */
-	spare_ns_ea: spare_ns_ea@ea {
-		reg = <0xea 0x2>;
-		status = "okay";
-		secure-status = "okay";
-	};
-};
-
-&hash1 {
-	secure-status = "okay";
-};
-
-&sdmmc1 {
-	compatible = "st,stm32-sdmmc2";
-};
-
-&sdmmc2 {
-	compatible = "st,stm32-sdmmc2";
-};
diff --git a/fdts/stm32mp157c.dtsi b/fdts/stm32mp157c.dtsi
deleted file mode 100644
index 91b20fa..0000000
--- a/fdts/stm32mp157c.dtsi
+++ /dev/null
@@ -1,374 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2017-2019 - All Rights Reserved
- * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
- */
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/stm32mp1-clks.h>
-#include <dt-bindings/reset/stm32mp1-resets.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	intc: interrupt-controller@a0021000 {
-		compatible = "arm,cortex-a7-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xa0021000 0x1000>,
-		      <0xa0022000 0x2000>;
-	};
-
-	clocks {
-		clk_hse: clk-hse {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-
-		clk_hsi: clk-hsi {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <64000000>;
-		};
-
-		clk_lse: clk-lse {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		clk_lsi: clk-lsi {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-		};
-
-		clk_csi: clk-csi {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <4000000>;
-		};
-
-		clk_i2s_ckin: i2s_ckin {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		clk_dsi_phy: ck_dsi_phy {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
-		ranges;
-
-		timers12: timer@40006000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40006000 0x400>;
-			clocks = <&rcc TIM12_K>;
-			clock-names = "int";
-			status = "disabled";
-		};
-
-		usart2: serial@4000e000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x4000e000 0x400>;
-			clocks = <&rcc USART2_K>;
-			resets = <&rcc USART2_R>;
-			status = "disabled";
-		};
-
-		usart3: serial@4000f000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x4000f000 0x400>;
-			clocks = <&rcc USART3_K>;
-			resets = <&rcc USART3_R>;
-			status = "disabled";
-		};
-
-		uart4: serial@40010000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x40010000 0x400>;
-			clocks = <&rcc UART4_K>;
-			resets = <&rcc UART4_R>;
-			status = "disabled";
-		};
-
-		uart5: serial@40011000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x40011000 0x400>;
-			clocks = <&rcc UART5_K>;
-			resets = <&rcc UART5_R>;
-			status = "disabled";
-		};
-
-
-		uart7: serial@40018000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x40018000 0x400>;
-			clocks = <&rcc UART7_K>;
-			resets = <&rcc UART7_R>;
-			status = "disabled";
-		};
-
-		uart8: serial@40019000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x40019000 0x400>;
-			clocks = <&rcc UART8_K>;
-			resets = <&rcc UART8_R>;
-			status = "disabled";
-		};
-
-		usart6: serial@44003000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x44003000 0x400>;
-			clocks = <&rcc USART6_K>;
-			resets = <&rcc USART6_R>;
-			status = "disabled";
-		};
-
-		timers15: timer@44006000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x44006000 0x400>;
-			clocks = <&rcc TIM15_K>;
-			clock-names = "int";
-			status = "disabled";
-		};
-
-		sdmmc3: sdmmc@48004000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00253180>;
-			reg = <0x48004000 0x400>, <0x48005000 0x400>;
-			clocks = <&rcc SDMMC3_K>;
-			clock-names = "apb_pclk";
-			resets = <&rcc SDMMC3_R>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <120000000>;
-			status = "disabled";
-		};
-
-		usbotg_hs: usb-otg@49000000 {
-			compatible = "st,stm32mp1-hsotg", "snps,dwc2";
-			reg = <0x49000000 0x10000>;
-			clocks = <&rcc USBO_K>;
-			clock-names = "otg";
-			resets = <&rcc USBO_R>;
-			reset-names = "dwc2";
-			status = "disabled";
-		};
-
-		rcc: rcc@50000000 {
-			compatible = "st,stm32mp1-rcc", "syscon";
-			reg = <0x50000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pwr: pwr@50001000 {
-			compatible = "st,stm32mp1-pwr", "syscon", "simple-mfd";
-			reg = <0x50001000 0x400>;
-		};
-
-		exti: interrupt-controller@5000d000 {
-			compatible = "st,stm32mp1-exti", "syscon";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x5000d000 0x400>;
-
-			/* exti_pwr is an extra interrupt controller used for
-			 * EXTI 55 to 60. It's mapped on pwr interrupt
-			 * controller.
-			 */
-			exti_pwr: exti-pwr {
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupt-parent = <&pwr>;
-				st,irq-number = <6>;
-			};
-		};
-
-		syscfg: syscon@50020000 {
-			compatible = "st,stm32mp157-syscfg", "syscon";
-			reg = <0x50020000 0x400>;
-			clocks = <&rcc SYSCFG>;
-		};
-
-		cryp1: cryp@54001000 {
-			compatible = "st,stm32mp1-cryp";
-			reg = <0x54001000 0x400>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CRYP1>;
-			resets = <&rcc CRYP1_R>;
-			status = "disabled";
-		};
-
-		hash1: hash@54002000 {
-			compatible = "st,stm32f756-hash";
-			reg = <0x54002000 0x400>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc HASH1>;
-			resets = <&rcc HASH1_R>;
-			status = "disabled";
-		};
-
-		rng1: rng@54003000 {
-			compatible = "st,stm32-rng";
-			reg = <0x54003000 0x400>;
-			clocks = <&rcc RNG1_K>;
-			resets = <&rcc RNG1_R>;
-			status = "disabled";
-		};
-
-		fmc: nand-controller@58002000 {
-			compatible = "st,stm32mp15-fmc2";
-			reg = <0x58002000 0x1000>,
-			      <0x80000000 0x1000>,
-			      <0x88010000 0x1000>,
-			      <0x88020000 0x1000>,
-			      <0x81000000 0x1000>,
-			      <0x89010000 0x1000>,
-			      <0x89020000 0x1000>;
-			clocks = <&rcc FMC_K>;
-			resets = <&rcc FMC_R>;
-			status = "disabled";
-		};
-
-		qspi: qspi@58003000 {
-			compatible = "st,stm32f469-qspi";
-			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
-			reg-names = "qspi", "qspi_mm";
-			clocks = <&rcc QSPI_K>;
-			resets = <&rcc QSPI_R>;
-			status = "disabled";
-		};
-
-		sdmmc1: sdmmc@58005000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00253180>;
-			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
-			clocks = <&rcc SDMMC1_K>;
-			clock-names = "apb_pclk";
-			resets = <&rcc SDMMC1_R>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <120000000>;
-			status = "disabled";
-		};
-
-		sdmmc2: sdmmc@58007000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00253180>;
-			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
-			clocks = <&rcc SDMMC2_K>;
-			clock-names = "apb_pclk";
-			resets = <&rcc SDMMC2_R>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <120000000>;
-			status = "disabled";
-		};
-
-		iwdg2: watchdog@5a002000 {
-			compatible = "st,stm32mp1-iwdg";
-			reg = <0x5a002000 0x400>;
-			clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
-			clock-names = "pclk", "lsi";
-			status = "disabled";
-		};
-
-		usart1: serial@5c000000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x5c000000 0x400>;
-			interrupt-names = "event", "wakeup";
-			interrupts-extended = <&intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-					      <&exti 26 1>;
-			clocks = <&rcc USART1_K>;
-			resets = <&rcc USART1_R>;
-			status = "disabled";
-		};
-
-		spi6: spi@5c001000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32h7-spi";
-			reg = <0x5c001000 0x400>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SPI6_K>;
-			resets = <&rcc SPI6_R>;
-			status = "disabled";
-		};
-
-		i2c4: i2c@5c002000 {
-			compatible = "st,stm32f7-i2c";
-			reg = <0x5c002000 0x400>;
-			interrupt-names = "event", "error", "wakeup";
-			interrupts-extended = <&intc GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-					      <&exti 24 1>;
-			clocks = <&rcc I2C4_K>;
-			resets = <&rcc I2C4_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		rtc: rtc@5c004000 {
-			compatible = "st,stm32mp1-rtc";
-			reg = <0x5c004000 0x400>;
-			clocks = <&rcc RTCAPB>, <&rcc RTC>;
-			clock-names = "pclk", "rtc_ck";
-			interrupts-extended = <&intc GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-					      <&exti 19 1>;
-			status = "disabled";
-		};
-
-		bsec: nvmem@5c005000 {
-			compatible = "st,stm32mp15-bsec";
-			reg = <0x5c005000 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ts_cal1: calib@5c {
-				reg = <0x5c 0x2>;
-			};
-			ts_cal2: calib@5e {
-				reg = <0x5e 0x2>;
-			};
-		};
-
-		etzpc: etzpc@5c007000 {
-			compatible = "st,stm32-etzpc";
-			reg = <0x5C007000 0x400>;
-			clocks = <&rcc TZPC>;
-			status = "disabled";
-			secure-status = "okay";
-		};
-
-		i2c6: i2c@5c009000 {
-			compatible = "st,stm32f7-i2c";
-			reg = <0x5c009000 0x400>;
-			interrupt-names = "event", "error", "wakeup";
-			interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					      <&exti 54 1>;
-			clocks = <&rcc I2C6_K>;
-			resets = <&rcc I2C6_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/fdts/stm32mp157caa-pinctrl.dtsi b/fdts/stm32mp157caa-pinctrl.dtsi
deleted file mode 100644
index 9b9cd08..0000000
--- a/fdts/stm32mp157caa-pinctrl.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
-	soc {
-		pinctrl: pin-controller@50002000 {
-			st,package = <STM32MP157CAA>;
-
-			gpioa: gpio@50002000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 0 16>;
-			};
-
-			gpiob: gpio@50003000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
-
-			gpioc: gpio@50004000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
-
-			gpiod: gpio@50005000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
-
-			gpioe: gpio@50006000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
-
-			gpiof: gpio@50007000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 80 16>;
-			};
-
-			gpiog: gpio@50008000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 96 16>;
-			};
-
-			gpioh: gpio@50009000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 112 16>;
-			};
-
-			gpioi: gpio@5000a000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 128 16>;
-			};
-
-			gpioj: gpio@5000b000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 144 16>;
-			};
-
-			gpiok: gpio@5000c000 {
-				status = "okay";
-				ngpios = <8>;
-				gpio-ranges = <&pinctrl 0 160 8>;
-			};
-		};
-
-		pinctrl_z: pin-controller-z@54004000 {
-			st,package = <STM32MP157CAA>;
-
-			gpioz: gpio@54004000 {
-				status = "okay";
-				ngpios = <8>;
-				gpio-ranges = <&pinctrl_z 0 400 8>;
-			};
-		};
-	};
-};
diff --git a/fdts/stm32mp157cac-pinctrl.dtsi b/fdts/stm32mp157cac-pinctrl.dtsi
deleted file mode 100644
index 777f991..0000000
--- a/fdts/stm32mp157cac-pinctrl.dtsi
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
-	soc {
-		pinctrl: pin-controller@50002000 {
-			st,package = <STM32MP157CAC>;
-
-			gpioa: gpio@50002000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 0 16>;
-			};
-
-			gpiob: gpio@50003000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
-
-			gpioc: gpio@50004000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
-
-			gpiod: gpio@50005000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
-
-			gpioe: gpio@50006000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
-
-			gpiof: gpio@50007000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 80 16>;
-			};
-
-			gpiog: gpio@50008000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 96 16>;
-			};
-
-			gpioh: gpio@50009000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 112 16>;
-			};
-
-			gpioi: gpio@5000a000 {
-				status = "okay";
-				ngpios = <12>;
-				gpio-ranges = <&pinctrl 0 128 12>;
-			};
-		};
-
-		pinctrl_z: pin-controller-z@54004000 {
-			st,package = <STM32MP157CAC>;
-
-			gpioz: gpio@54004000 {
-				status = "okay";
-				ngpios = <8>;
-				gpio-ranges = <&pinctrl_z 0 400 8>;
-			};
-		};
-	};
-};
diff --git a/fdts/stm32mp15xc.dtsi b/fdts/stm32mp15xc.dtsi
new file mode 100644
index 0000000..b06a55a
--- /dev/null
+++ b/fdts/stm32mp15xc.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/ {
+	soc {
+		cryp1: cryp@54001000 {
+			compatible = "st,stm32mp1-cryp";
+			reg = <0x54001000 0x400>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc CRYP1>;
+			resets = <&rcc CRYP1_R>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/fdts/stm32mp15xx-dkx.dtsi b/fdts/stm32mp15xx-dkx.dtsi
new file mode 100644
index 0000000..52b914b
--- /dev/null
+++ b/fdts/stm32mp15xx-dkx.dtsi
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
+
+/ {
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	vin: vin {
+		compatible = "regulator-fixed";
+		regulator-name = "vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&bsec {
+	board_id: board_id@ec {
+		reg = <0xec 0x4>;
+		st,non-secure-otp;
+	};
+};
+
+&clk_hse {
+	st,digbypass;
+};
+
+&cpu0{
+	cpu-supply = <&vddcore>;
+};
+
+&cpu1{
+	cpu-supply = <&vddcore>;
+};
+
+&hash1 {
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&exti_pwr 55 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			buck1-supply = <&vin>;
+			buck2-supply = <&vin>;
+			buck3-supply = <&vin>;
+			buck4-supply = <&vin>;
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&vin>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo4-supply = <&vin>;
+			ldo5-supply = <&vin>;
+			ldo6-supply = <&v3v3>;
+			vref_ddr-supply = <&vin>;
+			boost-supply = <&vin>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdda: ldo5 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+			};
+
+			v1v2_hdmi: ldo6 {
+				regulator-name = "v1v2_hdmi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				regulator-active-discharge = <1>;
+			};
+		};
+	};
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+	secure-status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rcc {
+	secure-status = "disabled";
+	st,clksrc = <
+		CLK_MPU_PLL1P
+		CLK_AXI_PLL2P
+		CLK_MCU_PLL3P
+		CLK_PLL12_HSE
+		CLK_PLL3_HSE
+		CLK_PLL4_HSE
+		CLK_RTC_LSE
+		CLK_MCO1_DISABLED
+		CLK_MCO2_DISABLED
+	>;
+
+	st,clkdiv = <
+		1 /*MPU*/
+		0 /*AXI*/
+		0 /*MCU*/
+		1 /*APB1*/
+		1 /*APB2*/
+		1 /*APB3*/
+		1 /*APB4*/
+		2 /*APB5*/
+		23 /*RTC*/
+		0 /*MCO1*/
+		0 /*MCO2*/
+	>;
+
+	st,pkcs = <
+		CLK_CKPER_HSE
+		CLK_FMC_ACLK
+		CLK_QSPI_ACLK
+		CLK_ETH_DISABLED
+		CLK_SDMMC12_PLL4P
+		CLK_DSI_DSIPLL
+		CLK_STGEN_HSE
+		CLK_USBPHY_HSE
+		CLK_SPI2S1_PLL3Q
+		CLK_SPI2S23_PLL3Q
+		CLK_SPI45_HSI
+		CLK_SPI6_HSI
+		CLK_I2C46_HSI
+		CLK_SDMMC3_PLL4P
+		CLK_USBO_USBPHY
+		CLK_ADC_CKPER
+		CLK_CEC_LSE
+		CLK_I2C12_HSI
+		CLK_I2C35_HSI
+		CLK_UART1_HSI
+		CLK_UART24_HSI
+		CLK_UART35_HSI
+		CLK_UART6_HSI
+		CLK_UART78_HSI
+		CLK_SPDIF_PLL4P
+		CLK_FDCAN_PLL4R
+		CLK_SAI1_PLL3Q
+		CLK_SAI2_PLL3Q
+		CLK_SAI3_PLL3Q
+		CLK_SAI4_PLL3Q
+		CLK_RNG1_LSI
+		CLK_RNG2_LSI
+		CLK_LPTIM1_PCLK1
+		CLK_LPTIM23_PCLK3
+		CLK_LPTIM45_LSE
+	>;
+
+	/* VCO = 1300.0 MHz => P = 650 (CPU) */
+	pll1: st,pll@0 {
+		compatible = "st,stm32mp1-pll";
+		reg = <0>;
+		cfg = < 2 80 0 0 0 PQR(1,0,0) >;
+		frac = < 0x800 >;
+	};
+
+	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+	pll2: st,pll@1 {
+		compatible = "st,stm32mp1-pll";
+		reg = <1>;
+		cfg = <2 65 1 0 0 PQR(1,1,1)>;
+		frac = <0x1400>;
+	};
+
+	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+	pll3: st,pll@2 {
+		compatible = "st,stm32mp1-pll";
+		reg = <2>;
+		cfg = <1 33 1 16 36 PQR(1,1,1)>;
+		frac = <0x1a04>;
+	};
+
+	/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
+	pll4: st,pll@3 {
+		compatible = "st,stm32mp1-pll";
+		reg = <3>;
+		cfg = <3 98 5 7 7 PQR(1,1,1)>;
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&timers15 {
+	secure-status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_b>;
+	status = "disabled";
+};
+
+&usart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usart3_pins_b>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbotg_hs {
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	usb-role-switch;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
diff --git a/fdts/stm32mp15xxaa-pinctrl.dtsi b/fdts/stm32mp15xxaa-pinctrl.dtsi
new file mode 100644
index 0000000..64e566b
--- /dev/null
+++ b/fdts/stm32mp15xxaa-pinctrl.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AA>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
+
+	gpioi: gpio@5000a000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 128 16>;
+	};
+
+	gpioj: gpio@5000b000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 144 16>;
+	};
+
+	gpiok: gpio@5000c000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl 0 160 8>;
+	};
+};
+
+&pinctrl_z {
+	st,package = <STM32MP_PKG_AA>;
+
+	gpioz: gpio@54004000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl_z 0 400 8>;
+	};
+};
diff --git a/fdts/stm32mp15xxab-pinctrl.dtsi b/fdts/stm32mp15xxab-pinctrl.dtsi
new file mode 100644
index 0000000..d29af89
--- /dev/null
+++ b/fdts/stm32mp15xxab-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AB>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <6>;
+		gpio-ranges = <&pinctrl 6 86 6>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl 6 102 10>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <2>;
+		gpio-ranges = <&pinctrl 0 112 2>;
+	};
+};
diff --git a/fdts/stm32mp15xxac-pinctrl.dtsi b/fdts/stm32mp15xxac-pinctrl.dtsi
new file mode 100644
index 0000000..5d8199f
--- /dev/null
+++ b/fdts/stm32mp15xxac-pinctrl.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AC>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
+
+	gpioi: gpio@5000a000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 0 128 12>;
+	};
+};
+
+&pinctrl_z {
+	st,package = <STM32MP_PKG_AC>;
+
+	gpioz: gpio@54004000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl_z 0 400 8>;
+	};
+};
diff --git a/fdts/stm32mp15xxad-pinctrl.dtsi b/fdts/stm32mp15xxad-pinctrl.dtsi
new file mode 100644
index 0000000..023f540
--- /dev/null
+++ b/fdts/stm32mp15xxad-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AD>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <6>;
+		gpio-ranges = <&pinctrl 6 86 6>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl 6 102 10>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <2>;
+		gpio-ranges = <&pinctrl 0 112 2>;
+	};
+};