diff --git a/drivers/st/clk/stm32mp1_clkfunc.c b/drivers/st/clk/stm32mp1_clkfunc.c
index 19dfe1b..06c417b 100644
--- a/drivers/st/clk/stm32mp1_clkfunc.c
+++ b/drivers/st/clk/stm32mp1_clkfunc.c
@@ -10,17 +10,12 @@
 
 #include <platform_def.h>
 
+#include <drivers/st/stm32_gpio.h>
+#include <drivers/st/stm32mp_clkfunc.h>
 #include <drivers/st/stm32mp1_clk.h>
 #include <drivers/st/stm32mp1_clkfunc.h>
 #include <dt-bindings/clock/stm32mp1-clksrc.h>
 
-#define DT_RCC_NODE_NAME	"rcc@50000000"
-#define DT_RCC_CLK_COMPAT	"st,stm32mp1-rcc"
-#define DT_RCC_COMPAT		"syscon"
-#define DT_STGEN_COMPAT		"st,stm32-stgen"
-#define DT_UART_COMPAT		"st,stm32h7-uart"
-#define DT_USART_COMPAT		"st,stm32h7-usart"
-
 const char *stm32mp_osc_node_label[NB_OSC] = {
 	[_LSI] = "clk-lsi",
 	[_LSE] = "clk-lse",
@@ -31,20 +26,12 @@
 	[_USB_PHY_48] = "ck_usbo_48m"
 };
 
-/*******************************************************************************
- * This function returns the RCC node in the device tree.
- ******************************************************************************/
-static int fdt_get_rcc_node(void *fdt)
-{
-	return fdt_node_offset_by_compatible(fdt, -1, DT_RCC_CLK_COMPAT);
-}
-
-/*******************************************************************************
- * This function reads the frequency of an oscillator from its name.
- * It reads the value indicated inside the device tree.
- * Returns 0 on success, and a negative FDT/ERRNO error code on failure.
- * On success, value is stored in the second parameter.
- ******************************************************************************/
+/*
+ * Get the frequency of an oscillator from its name in device tree.
+ * @param name: oscillator name
+ * @param freq: stores the frequency of the oscillator
+ * @return: 0 on success, and a negative FDT/ERRNO error code on failure.
+ */
 int fdt_osc_read_freq(const char *name, uint32_t *freq)
 {
 	int node, subnode;
@@ -88,11 +75,12 @@
 	return 0;
 }
 
-/*******************************************************************************
- * This function checks the presence of an oscillator property from its id.
- * The search is done inside the device tree.
- * Returns true/false regarding search result.
- ******************************************************************************/
+/*
+ * Check the presence of an oscillator property from its id.
+ * @param osc_id: oscillator ID
+ * @param prop_name: property name
+ * @return: true/false regarding search result.
+ */
 bool fdt_osc_read_bool(enum stm32mp_osc_id osc_id, const char *prop_name)
 {
 	int node, subnode;
@@ -133,11 +121,13 @@
 	return false;
 }
 
-/*******************************************************************************
- * This function reads a value of a oscillator property from its id.
- * Returns value on success, and a default value if property not found.
- * Default value is passed as parameter.
- ******************************************************************************/
+/*
+ * Get the value of a oscillator property from its ID.
+ * @param osc_id: oscillator ID
+ * @param prop_name: property name
+ * @param dflt_value: default value
+ * @return oscillator value on success, default value if property not found.
+ */
 uint32_t fdt_osc_read_uint32_default(enum stm32mp_osc_id osc_id,
 				     const char *prop_name, uint32_t dflt_value)
 {
@@ -176,201 +166,3 @@
 
 	return dflt_value;
 }
-
-/*******************************************************************************
- * This function reads the rcc base address.
- * It reads the value indicated inside the device tree.
- * Returns address if success, and 0 value else.
- ******************************************************************************/
-uint32_t fdt_rcc_read_addr(void)
-{
-	int node, subnode;
-	void *fdt;
-
-	if (fdt_get_address(&fdt) == 0) {
-		return 0;
-	}
-
-	node = fdt_path_offset(fdt, "/soc");
-	if (node < 0) {
-		return 0;
-	}
-
-	fdt_for_each_subnode(subnode, fdt, node) {
-		const char *cchar;
-		int ret;
-
-		cchar = fdt_get_name(fdt, subnode, &ret);
-		if (cchar == NULL) {
-			return 0;
-		}
-
-		if (strncmp(cchar, DT_RCC_NODE_NAME, (size_t)ret) == 0) {
-			const fdt32_t *cuint;
-
-			cuint = fdt_getprop(fdt, subnode, "reg", NULL);
-			if (cuint == NULL) {
-				return 0;
-			}
-
-			return fdt32_to_cpu(*cuint);
-		}
-	}
-
-	return 0;
-}
-
-/*******************************************************************************
- * This function reads a series of parameters in rcc-clk section.
- * It reads the values indicated inside the device tree, from property name.
- * The number of parameters is also indicated as entry parameter.
- * Returns 0 if success, and a negative value else.
- * If success, values are stored at the second parameter address.
- ******************************************************************************/
-int fdt_rcc_read_uint32_array(const char *prop_name,
-			      uint32_t *array, uint32_t count)
-{
-	int node;
-	void *fdt;
-
-	if (fdt_get_address(&fdt) == 0) {
-		return -ENOENT;
-	}
-
-	node = fdt_node_offset_by_compatible(fdt, -1, DT_RCC_CLK_COMPAT);
-	if (node < 0) {
-		return -FDT_ERR_NOTFOUND;
-	}
-
-	return fdt_read_uint32_array(node, prop_name, array, count);
-}
-
-/*******************************************************************************
- * This function gets the subnode offset in rcc-clk section from its name.
- * It reads the values indicated inside the device tree.
- * Returns offset on success, and a negative FDT/ERRNO error code on failure.
- ******************************************************************************/
-int fdt_rcc_subnode_offset(const char *name)
-{
-	int node, subnode;
-	void *fdt;
-
-	if (fdt_get_address(&fdt) == 0) {
-		return -ENOENT;
-	}
-
-	node = fdt_get_rcc_node(fdt);
-	if (node < 0) {
-		return -FDT_ERR_NOTFOUND;
-	}
-
-	subnode = fdt_subnode_offset(fdt, node, name);
-	if (subnode <= 0) {
-		return -FDT_ERR_NOTFOUND;
-	}
-
-	return subnode;
-}
-
-/*******************************************************************************
- * This function gets the pointer to a rcc-clk property from its name.
- * It reads the values indicated inside the device tree.
- * Length of the property is stored in the second parameter.
- * Returns pointer on success, and NULL value on failure.
- ******************************************************************************/
-const fdt32_t *fdt_rcc_read_prop(const char *prop_name, int *lenp)
-{
-	const fdt32_t *cuint;
-	int node, len;
-	void *fdt;
-
-	if (fdt_get_address(&fdt) == 0) {
-		return NULL;
-	}
-
-	node = fdt_get_rcc_node(fdt);
-	if (node < 0) {
-		return NULL;
-	}
-
-	cuint = fdt_getprop(fdt, node, prop_name, &len);
-	if (cuint == NULL) {
-		return NULL;
-	}
-
-	*lenp = len;
-	return cuint;
-}
-
-/*******************************************************************************
- * This function gets the secure status for rcc node.
- * It reads secure-status in device tree.
- * Returns true if rcc is available from secure world, false if not.
- ******************************************************************************/
-bool fdt_get_rcc_secure_status(void)
-{
-	int node;
-	void *fdt;
-
-	if (fdt_get_address(&fdt) == 0) {
-		return false;
-	}
-
-	node = fdt_get_rcc_node(fdt);
-	if (node < 0) {
-		return false;
-	}
-
-	return (fdt_get_status(node) & DT_SECURE) != 0U;
-}
-
-/*******************************************************************************
- * This function reads the stgen base address.
- * It reads the value indicated inside the device tree.
- * Returns address on success, and NULL value on failure.
- ******************************************************************************/
-uintptr_t fdt_get_stgen_base(void)
-{
-	int node;
-	const fdt32_t *cuint;
-	void *fdt;
-
-	if (fdt_get_address(&fdt) == 0) {
-		return 0;
-	}
-
-	node = fdt_node_offset_by_compatible(fdt, -1, DT_STGEN_COMPAT);
-	if (node < 0) {
-		return 0;
-	}
-
-	cuint = fdt_getprop(fdt, node, "reg", NULL);
-	if (cuint == NULL) {
-		return 0;
-	}
-
-	return fdt32_to_cpu(*cuint);
-}
-
-/*******************************************************************************
- * This function gets the clock ID of the given node.
- * It reads the value indicated inside the device tree.
- * Returns ID on success, and a negative FDT/ERRNO error code on failure.
- ******************************************************************************/
-int fdt_get_clock_id(int node)
-{
-	const fdt32_t *cuint;
-	void *fdt;
-
-	if (fdt_get_address(&fdt) == 0) {
-		return -ENOENT;
-	}
-
-	cuint = fdt_getprop(fdt, node, "clocks", NULL);
-	if (cuint == NULL) {
-		return -FDT_ERR_NOTFOUND;
-	}
-
-	cuint++;
-	return (int)fdt32_to_cpu(*cuint);
-}