Introduce STMicroelectronics STM32MP1 platform
STM32MP1 is a microprocessor designed by STMicroelectronics,
based on a dual Arm Cortex-A7.
It is an Armv7-A platform, using dedicated code from TF-A.
STM32MP1 uses BL2 compiled with BL2_AT_EL3.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Mathieu Belou <mathieu.belou@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Pascal Paillet <p.paillet@st.com>
diff --git a/plat/st/stm32mp1/bl2_plat_setup.c b/plat/st/stm32mp1/bl2_plat_setup.c
new file mode 100644
index 0000000..d386202
--- /dev/null
+++ b/plat/st/stm32mp1/bl2_plat_setup.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <boot_api.h>
+#include <console.h>
+#include <debug.h>
+#include <delay_timer.h>
+#include <desc_image_load.h>
+#include <generic_delay_timer.h>
+#include <mmio.h>
+#include <platform.h>
+#include <platform_def.h>
+#include <stm32mp1_private.h>
+#include <stm32mp1_pwr.h>
+#include <stm32mp1_rcc.h>
+#include <string.h>
+#include <xlat_tables_v2.h>
+
+void bl2_el3_early_platform_setup(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
+{
+ stm32mp1_save_boot_ctx_address(arg0);
+}
+
+void bl2_platform_setup(void)
+{
+ INFO("BL2 runs SP_MIN setup\n");
+}
+
+void bl2_el3_plat_arch_setup(void)
+{
+ /*
+ * Disable the backup domain write protection.
+ * The protection is enable at each reset by hardware
+ * and must be disabled by software.
+ */
+ mmio_setbits_32(PWR_BASE + PWR_CR1, PWR_CR1_DBP);
+
+ while ((mmio_read_32(PWR_BASE + PWR_CR1) & PWR_CR1_DBP) == 0U) {
+ ;
+ }
+
+ /* Reset backup domain on cold boot cases */
+ if ((mmio_read_32(RCC_BASE + RCC_BDCR) & RCC_BDCR_RTCSRC_MASK) == 0U) {
+ mmio_setbits_32(RCC_BASE + RCC_BDCR, RCC_BDCR_VSWRST);
+
+ while ((mmio_read_32(RCC_BASE + RCC_BDCR) & RCC_BDCR_VSWRST) ==
+ 0U) {
+ ;
+ }
+
+ mmio_clrbits_32(RCC_BASE + RCC_BDCR, RCC_BDCR_VSWRST);
+ }
+
+ mmap_add_region(BL_CODE_BASE, BL_CODE_BASE,
+ BL_CODE_END - BL_CODE_BASE,
+ MT_CODE | MT_SECURE);
+
+ /* Prevent corruption of preloaded BL32 */
+ mmap_add_region(BL32_BASE, BL32_BASE,
+ BL32_LIMIT - BL32_BASE,
+ MT_MEMORY | MT_RO | MT_SECURE);
+
+ /* Prevent corruption of preloaded Device Tree */
+ mmap_add_region(DTB_BASE, DTB_BASE,
+ DTB_LIMIT - DTB_BASE,
+ MT_MEMORY | MT_RO | MT_SECURE);
+
+ configure_mmu();
+
+ generic_delay_timer_init();
+
+ stm32mp1_io_setup();
+}