plat/xilinx/zynqmp/zynqmp_def.h - filogic/atf - Gitiles

 /*
  * Copyright (c) 2014-2016, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * Redistributions of source code must retain the above copyright notice, this
  * list of conditions and the following disclaimer.
  *
  * Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * Neither the name of ARM nor the names of its contributors may be used
  * to endorse or promote products derived from this software without specific
  * prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */

 #ifndef __ZYNQMP_DEF_H__
 #define __ZYNQMP_DEF_H__

 #include <common_def.h>

 /* Firmware Image Package */
 #define ZYNQMP_PRIMARY_CPU		0

 /* Memory location options for Shared data and TSP in ZYNQMP */
 #define ZYNQMP_IN_TRUSTED_SRAM		0
 #define ZYNQMP_IN_TRUSTED_DRAM		1

 /*******************************************************************************
  * ZYNQMP memory map related constants
  ******************************************************************************/
 /* Aggregate of all devices in the first GB */
 #define DEVICE0_BASE		0xFF000000
 #define DEVICE0_SIZE		0x00E00000
 #define DEVICE1_BASE		0xF9000000
 #define DEVICE1_SIZE		0x01000000

 /* For cpu reset APU space here too 0xFE5F1000 CRF_APB*/
 #define CRF_APB_BASE		0xFD1A0000
 #define CRF_APB_SIZE		0x00600000

 /* CRF registers and bitfields */
 #define CRF_APB_RST_FPD_APU	(CRF_APB_BASE + 0X00000104)

 #define CRF_APB_RST_FPD_APU_ACPU_RESET		(1 << 0)
 #define CRF_APB_RST_FPD_APU_ACPU_PWRON_RESET	(1 << 10)

 /* CRL registers and bitfields */
 #define CRL_APB_BASE			0xFF5E0000
 #define CRL_APB_RPLL_CTRL		(CRL_APB_BASE + 0x30)
 #define CRL_APB_TIMESTAMP_REF_CTRL	(CRL_APB_BASE + 0x128)
 #define CRL_APB_RESET_CTRL		(CRL_APB_BASE + 0x218)

 #define CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT	(1 << 24)

 #define CRL_APB_RPLL_CTRL_BYPASS	(1 << 3)

 #define CRL_APB_RESET_CTRL_SOFT_RESET	(1 << 4)

 /* system counter registers and bitfields */
 #define IOU_SCNTRS_BASE			0xFF260000
 #define IOU_SCNTRS_CONTROL		(IOU_SCNTRS_BASE + 0)
 #define IOU_SCNTRS_BASEFREQ		(IOU_SCNTRS_BASE + 0x20)

 #define IOU_SCNTRS_CONTROL_EN		(1 << 0)

 /* APU registers and bitfields */
 #define APU_BASE		0xFD5C0000
 #define APU_CONFIG_0		(APU_BASE + 0x20)
 #define APU_RVBAR_L_0		(APU_BASE + 0x40)
 #define APU_RVBAR_H_0		(APU_BASE + 0x44)
 #define APU_PWRCTL		(APU_BASE + 0x90)

 #define APU_CONFIG_0_VINITHI_SHIFT	8
 #define APU_0_PWRCTL_CPUPWRDWNREQ_MASK		1
 #define APU_1_PWRCTL_CPUPWRDWNREQ_MASK		2
 #define APU_2_PWRCTL_CPUPWRDWNREQ_MASK		4
 #define APU_3_PWRCTL_CPUPWRDWNREQ_MASK		8

 /* PMU registers and bitfields */
 #define PMU_GLOBAL_BASE			0xFFD80000
 #define PMU_GLOBAL_CNTRL		(PMU_GLOBAL_BASE + 0)
 #define PMU_GLOBAL_REQ_PWRUP_STATUS	(PMU_GLOBAL_BASE + 0x110)
 #define PMU_GLOBAL_REQ_PWRUP_EN		(PMU_GLOBAL_BASE + 0x118)
 #define PMU_GLOBAL_REQ_PWRUP_DIS	(PMU_GLOBAL_BASE + 0x11c)
 #define PMU_GLOBAL_REQ_PWRUP_TRIG	(PMU_GLOBAL_BASE + 0x120)

 #define PMU_GLOBAL_CNTRL_FW_IS_PRESENT	(1 << 4)

 /*******************************************************************************
  * CCI-400 related constants
  ******************************************************************************/
 #define PLAT_ARM_CCI_BASE		0xFD6E0000
 #define PLAT_ARM_CCI_CLUSTER0_SL_IFACE_IX	3
 #define PLAT_ARM_CCI_CLUSTER1_SL_IFACE_IX	4

 /*******************************************************************************
  * GIC-400 & interrupt handling related constants
  ******************************************************************************/
 #define BASE_GICD_BASE		0xF9010000
 #define BASE_GICC_BASE		0xF9020000
 #define BASE_GICH_BASE		0xF9040000
 #define BASE_GICV_BASE		0xF9060000

 #define IRQ_SEC_IPI_APU			67
 #define ARM_IRQ_SEC_PHY_TIMER		29

 #define ARM_IRQ_SEC_SGI_0		8
 #define ARM_IRQ_SEC_SGI_1		9
 #define ARM_IRQ_SEC_SGI_2		10
 #define ARM_IRQ_SEC_SGI_3		11
 #define ARM_IRQ_SEC_SGI_4		12
 #define ARM_IRQ_SEC_SGI_5		13
 #define ARM_IRQ_SEC_SGI_6		14
 #define ARM_IRQ_SEC_SGI_7		15

 #define MAX_INTR_EL3			128

 /*******************************************************************************
  * UART related constants
  ******************************************************************************/
 #define ZYNQMP_UART0_BASE		0xFF000000
 #define ZYNQMP_UART1_BASE		0xFF001000

 #define PLAT_ARM_CRASH_UART_BASE	ZYNQMP_UART0_BASE
 /* impossible to call C routine how it is done now - hardcode any value */
 #define	PLAT_ARM_CRASH_UART_CLK_IN_HZ	100000000 /* FIXME */

 /* Must be non zero */
 #define ZYNQMP_UART_BAUDRATE	115200
 #define ARM_CONSOLE_BAUDRATE	ZYNQMP_UART_BAUDRATE

 /* Silicon version detection */
 #define ZYNQMP_SILICON_VER_MASK		0xF000
 #define ZYNQMP_SILICON_VER_SHIFT	12
 #define ZYNQMP_CSU_VERSION_SILICON	0
 #define ZYNQMP_CSU_VERSION_EP108	1
 #define ZYNQMP_CSU_VERSION_VELOCE	2
 #define ZYNQMP_CSU_VERSION_QEMU		3

 #define ZYNQMP_RTL_VER_MASK		0xFF0
 #define ZYNQMP_RTL_VER_SHIFT		4

 #define ZYNQMP_PS_VER_MASK		0xF
 #define ZYNQMP_PS_VER_SHIFT		0

 #define ZYNQMP_CSU_BASEADDR		0xFFCA0000
 #define ZYNQMP_CSU_IDCODE_OFFSET	0x40

 #define ZYNQMP_CSU_IDCODE_XILINX_ID_SHIFT	0
 #define ZYNQMP_CSU_IDCODE_XILINX_ID_MASK	(0xFFF << ZYNQMP_CSU_IDCODE_XILINX_ID_SHIFT)
 #define ZYNQMP_CSU_IDCODE_XILINX_ID		0x093

 #define ZYNQMP_CSU_IDCODE_SVD_SHIFT		12
 #define ZYNQMP_CSU_IDCODE_SVD_MASK		(0xE << ZYNQMP_CSU_IDCODE_SVD_SHIFT)
 #define ZYNQMP_CSU_IDCODE_DEVICE_CODE_SHIFT	15
 #define ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK	(0xF << ZYNQMP_CSU_IDCODE_DEVICE_CODE_SHIFT)
 #define ZYNQMP_CSU_IDCODE_SUB_FAMILY_SHIFT	19
 #define ZYNQMP_CSU_IDCODE_SUB_FAMILY_MASK	(0x3 << ZYNQMP_CSU_IDCODE_SUB_FAMILY_SHIFT)
 #define ZYNQMP_CSU_IDCODE_FAMILY_SHIFT		21
 #define ZYNQMP_CSU_IDCODE_FAMILY_MASK		(0x7F << ZYNQMP_CSU_IDCODE_FAMILY_SHIFT)
 #define ZYNQMP_CSU_IDCODE_FAMILY		0x23

 #define ZYNQMP_CSU_IDCODE_REVISION_SHIFT	28
 #define ZYNQMP_CSU_IDCODE_REVISION_MASK		(0xF << ZYNQMP_CSU_IDCODE_REVISION_SHIFT)
 #define ZYNQMP_CSU_IDCODE_REVISION		0

 #define ZYNQMP_CSU_VERSION_OFFSET	0x44

 #endif /* __ZYNQMP_DEF_H__ */
	/*
	* Copyright (c) 2014-2016, ARM Limited and Contributors. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* Redistributions of source code must retain the above copyright notice, this
	* list of conditions and the following disclaimer.
	*
	* Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* Neither the name of ARM nor the names of its contributors may be used
	* to endorse or promote products derived from this software without specific
	* prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/

	#ifndef __ZYNQMP_DEF_H__
	#define __ZYNQMP_DEF_H__

	#include <common_def.h>

	/* Firmware Image Package */
	#define ZYNQMP_PRIMARY_CPU 0

	/* Memory location options for Shared data and TSP in ZYNQMP */
	#define ZYNQMP_IN_TRUSTED_SRAM 0
	#define ZYNQMP_IN_TRUSTED_DRAM 1

	/*******************************************************************************
	* ZYNQMP memory map related constants
	******************************************************************************/
	/* Aggregate of all devices in the first GB */
	#define DEVICE0_BASE 0xFF000000
	#define DEVICE0_SIZE 0x00E00000
	#define DEVICE1_BASE 0xF9000000
	#define DEVICE1_SIZE 0x01000000

	/* For cpu reset APU space here too 0xFE5F1000 CRF_APB*/
	#define CRF_APB_BASE 0xFD1A0000
	#define CRF_APB_SIZE 0x00600000

	/* CRF registers and bitfields */
	#define CRF_APB_RST_FPD_APU (CRF_APB_BASE + 0X00000104)

	#define CRF_APB_RST_FPD_APU_ACPU_RESET (1 << 0)
	#define CRF_APB_RST_FPD_APU_ACPU_PWRON_RESET (1 << 10)

	/* CRL registers and bitfields */
	#define CRL_APB_BASE 0xFF5E0000
	#define CRL_APB_RPLL_CTRL (CRL_APB_BASE + 0x30)
	#define CRL_APB_TIMESTAMP_REF_CTRL (CRL_APB_BASE + 0x128)
	#define CRL_APB_RESET_CTRL (CRL_APB_BASE + 0x218)

	#define CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT (1 << 24)

	#define CRL_APB_RPLL_CTRL_BYPASS (1 << 3)

	#define CRL_APB_RESET_CTRL_SOFT_RESET (1 << 4)

	/* system counter registers and bitfields */
	#define IOU_SCNTRS_BASE 0xFF260000
	#define IOU_SCNTRS_CONTROL (IOU_SCNTRS_BASE + 0)
	#define IOU_SCNTRS_BASEFREQ (IOU_SCNTRS_BASE + 0x20)

	#define IOU_SCNTRS_CONTROL_EN (1 << 0)

	/* APU registers and bitfields */
	#define APU_BASE 0xFD5C0000
	#define APU_CONFIG_0 (APU_BASE + 0x20)
	#define APU_RVBAR_L_0 (APU_BASE + 0x40)
	#define APU_RVBAR_H_0 (APU_BASE + 0x44)
	#define APU_PWRCTL (APU_BASE + 0x90)

	#define APU_CONFIG_0_VINITHI_SHIFT 8
	#define APU_0_PWRCTL_CPUPWRDWNREQ_MASK 1
	#define APU_1_PWRCTL_CPUPWRDWNREQ_MASK 2
	#define APU_2_PWRCTL_CPUPWRDWNREQ_MASK 4
	#define APU_3_PWRCTL_CPUPWRDWNREQ_MASK 8

	/* PMU registers and bitfields */
	#define PMU_GLOBAL_BASE 0xFFD80000
	#define PMU_GLOBAL_CNTRL (PMU_GLOBAL_BASE + 0)
	#define PMU_GLOBAL_REQ_PWRUP_STATUS (PMU_GLOBAL_BASE + 0x110)
	#define PMU_GLOBAL_REQ_PWRUP_EN (PMU_GLOBAL_BASE + 0x118)
	#define PMU_GLOBAL_REQ_PWRUP_DIS (PMU_GLOBAL_BASE + 0x11c)
	#define PMU_GLOBAL_REQ_PWRUP_TRIG (PMU_GLOBAL_BASE + 0x120)

	#define PMU_GLOBAL_CNTRL_FW_IS_PRESENT (1 << 4)

	/*******************************************************************************
	* CCI-400 related constants
	******************************************************************************/
	#define PLAT_ARM_CCI_BASE 0xFD6E0000
	#define PLAT_ARM_CCI_CLUSTER0_SL_IFACE_IX 3
	#define PLAT_ARM_CCI_CLUSTER1_SL_IFACE_IX 4

	/*******************************************************************************
	* GIC-400 & interrupt handling related constants
	******************************************************************************/
	#define BASE_GICD_BASE 0xF9010000
	#define BASE_GICC_BASE 0xF9020000
	#define BASE_GICH_BASE 0xF9040000
	#define BASE_GICV_BASE 0xF9060000

	#define IRQ_SEC_IPI_APU 67
	#define ARM_IRQ_SEC_PHY_TIMER 29

	#define ARM_IRQ_SEC_SGI_0 8
	#define ARM_IRQ_SEC_SGI_1 9
	#define ARM_IRQ_SEC_SGI_2 10
	#define ARM_IRQ_SEC_SGI_3 11
	#define ARM_IRQ_SEC_SGI_4 12
	#define ARM_IRQ_SEC_SGI_5 13
	#define ARM_IRQ_SEC_SGI_6 14
	#define ARM_IRQ_SEC_SGI_7 15

	#define MAX_INTR_EL3 128

	/*******************************************************************************
	* UART related constants
	******************************************************************************/
	#define ZYNQMP_UART0_BASE 0xFF000000
	#define ZYNQMP_UART1_BASE 0xFF001000

	#define PLAT_ARM_CRASH_UART_BASE ZYNQMP_UART0_BASE
	/* impossible to call C routine how it is done now - hardcode any value */
	#define PLAT_ARM_CRASH_UART_CLK_IN_HZ 100000000 /* FIXME */

	/* Must be non zero */
	#define ZYNQMP_UART_BAUDRATE 115200
	#define ARM_CONSOLE_BAUDRATE ZYNQMP_UART_BAUDRATE

	/* Silicon version detection */
	#define ZYNQMP_SILICON_VER_MASK 0xF000
	#define ZYNQMP_SILICON_VER_SHIFT 12
	#define ZYNQMP_CSU_VERSION_SILICON 0
	#define ZYNQMP_CSU_VERSION_EP108 1
	#define ZYNQMP_CSU_VERSION_VELOCE 2
	#define ZYNQMP_CSU_VERSION_QEMU 3

	#define ZYNQMP_RTL_VER_MASK 0xFF0
	#define ZYNQMP_RTL_VER_SHIFT 4

	#define ZYNQMP_PS_VER_MASK 0xF
	#define ZYNQMP_PS_VER_SHIFT 0

	#define ZYNQMP_CSU_BASEADDR 0xFFCA0000
	#define ZYNQMP_CSU_IDCODE_OFFSET 0x40

	#define ZYNQMP_CSU_IDCODE_XILINX_ID_SHIFT 0
	#define ZYNQMP_CSU_IDCODE_XILINX_ID_MASK (0xFFF << ZYNQMP_CSU_IDCODE_XILINX_ID_SHIFT)
	#define ZYNQMP_CSU_IDCODE_XILINX_ID 0x093

	#define ZYNQMP_CSU_IDCODE_SVD_SHIFT 12
	#define ZYNQMP_CSU_IDCODE_SVD_MASK (0xE << ZYNQMP_CSU_IDCODE_SVD_SHIFT)
	#define ZYNQMP_CSU_IDCODE_DEVICE_CODE_SHIFT 15
	#define ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK (0xF << ZYNQMP_CSU_IDCODE_DEVICE_CODE_SHIFT)
	#define ZYNQMP_CSU_IDCODE_SUB_FAMILY_SHIFT 19
	#define ZYNQMP_CSU_IDCODE_SUB_FAMILY_MASK (0x3 << ZYNQMP_CSU_IDCODE_SUB_FAMILY_SHIFT)
	#define ZYNQMP_CSU_IDCODE_FAMILY_SHIFT 21
	#define ZYNQMP_CSU_IDCODE_FAMILY_MASK (0x7F << ZYNQMP_CSU_IDCODE_FAMILY_SHIFT)
	#define ZYNQMP_CSU_IDCODE_FAMILY 0x23

	#define ZYNQMP_CSU_IDCODE_REVISION_SHIFT 28
	#define ZYNQMP_CSU_IDCODE_REVISION_MASK (0xF << ZYNQMP_CSU_IDCODE_REVISION_SHIFT)
	#define ZYNQMP_CSU_IDCODE_REVISION 0

	#define ZYNQMP_CSU_VERSION_OFFSET 0x44

	#endif /* __ZYNQMP_DEF_H__ */