diff --git a/bl32/sp_min/aarch32/entrypoint.S b/bl32/sp_min/aarch32/entrypoint.S
index b3fccde..d868c53 100644
--- a/bl32/sp_min/aarch32/entrypoint.S
+++ b/bl32/sp_min/aarch32/entrypoint.S
@@ -18,6 +18,17 @@
 	.globl	sp_min_entrypoint
 	.globl	sp_min_warm_entrypoint
 
+	.macro route_fiq_to_sp_min reg
+		/* -----------------------------------------------------
+		 * FIQs are secure interrupts trapped by Monitor and non
+		 * secure is not allowed to mask the FIQs.
+		 * -----------------------------------------------------
+		 */
+		ldcopr	\reg, SCR
+		orr	\reg, \reg, #SCR_FIQ_BIT
+		bic	\reg, \reg, #SCR_FW_BIT
+		stcopr	\reg, SCR
+	.endm
 
 vector_base sp_min_vector_table
 	b	sp_min_entrypoint
@@ -27,7 +38,7 @@
 	b	plat_panic_handler	/* Data abort */
 	b	plat_panic_handler	/* Reserved */
 	b	plat_panic_handler	/* IRQ */
-	b	plat_panic_handler	/* FIQ */
+	b	handle_fiq		/* FIQ */
 
 
 /*
@@ -92,6 +103,10 @@
 	mov	r1, #0
 #endif /* RESET_TO_SP_MIN */
 
+#if SP_MIN_WITH_SECURE_FIQ
+	route_fiq_to_sp_min r4
+#endif
+
 	bl	sp_min_early_platform_setup
 	bl	sp_min_plat_arch_setup
 
@@ -166,6 +181,44 @@
 endfunc handle_smc
 
 /*
+ * Secure Interrupts handling function for SP_MIN.
+ */
+func handle_fiq
+#if !SP_MIN_WITH_SECURE_FIQ
+	b plat_panic_handler
+#else
+	/* FIQ has a +4 offset for lr compared to preferred return address */
+	sub	lr, lr, #4
+	/* On SMC entry, `sp` points to `smc_ctx_t`. Save `lr`. */
+	str	lr, [sp, #SMC_CTX_LR_MON]
+
+	smcc_save_gp_mode_regs
+
+	/*
+	 * AArch32 architectures need to clear the exclusive access when
+	 * entering Monitor mode.
+	 */
+	clrex
+
+	/* load run-time stack */
+	mov	r2, sp
+	ldr	sp, [r2, #SMC_CTX_SP_MON]
+
+	/* Switch to Secure Mode */
+	ldr	r0, [r2, #SMC_CTX_SCR]
+	bic	r0, #SCR_NS_BIT
+	stcopr	r0, SCR
+	isb
+
+	push	{r2, r3}
+	bl	sp_min_fiq
+	pop	{r0, r3}
+
+	b	sp_min_exit
+#endif
+endfunc handle_fiq
+
+/*
  * The Warm boot entrypoint for SP_MIN.
  */
 func sp_min_warm_entrypoint
@@ -213,6 +266,10 @@
 	mov	r0, #DISABLE_DCACHE
 	bl	bl32_plat_enable_mmu
 
+#if SP_MIN_WITH_SECURE_FIQ
+	route_fiq_to_sp_min r0
+#endif
+
 #if HW_ASSISTED_COHERENCY || WARMBOOT_ENABLE_DCACHE_EARLY
 	ldcopr	r0, SCTLR
 	orr	r0, r0, #SCTLR_C_BIT
diff --git a/bl32/sp_min/sp_min.mk b/bl32/sp_min/sp_min.mk
index f6e58e9..39588ce 100644
--- a/bl32/sp_min/sp_min.mk
+++ b/bl32/sp_min/sp_min.mk
@@ -37,3 +37,9 @@
 RESET_TO_SP_MIN	:= 0
 $(eval $(call add_define,RESET_TO_SP_MIN))
 $(eval $(call assert_boolean,RESET_TO_SP_MIN))
+
+# Flag to allow SP_MIN to handle FIQ interrupts in monitor mode. The platform
+# port is free to override this value. It is default disabled.
+SP_MIN_WITH_SECURE_FIQ 	?= 0
+$(eval $(call add_define,SP_MIN_WITH_SECURE_FIQ))
+$(eval $(call assert_boolean,SP_MIN_WITH_SECURE_FIQ))
diff --git a/bl32/sp_min/sp_min_main.c b/bl32/sp_min/sp_min_main.c
index 1c83cbe..06b0f33 100644
--- a/bl32/sp_min/sp_min_main.c
+++ b/bl32/sp_min/sp_min_main.c
@@ -207,3 +207,19 @@
 	copy_cpu_ctx_to_smc_stx(get_regs_ctx(cm_get_context(NON_SECURE)),
 			next_smc_ctx);
 }
+
+#if SP_MIN_WITH_SECURE_FIQ
+/******************************************************************************
+ * This function is invoked on secure interrupts. By construction of the
+ * SP_MIN, secure interrupts can only be handled when core executes in non
+ * secure state.
+ *****************************************************************************/
+void sp_min_fiq(void)
+{
+	uint32_t id;
+
+	id = plat_ic_acknowledge_interrupt();
+	sp_min_plat_fiq_handler(id);
+	plat_ic_end_of_interrupt(id);
+}
+#endif /* SP_MIN_WITH_SECURE_FIQ */
diff --git a/bl32/sp_min/sp_min_private.h b/bl32/sp_min/sp_min_private.h
index 97185b9..1836af9 100644
--- a/bl32/sp_min/sp_min_private.h
+++ b/bl32/sp_min/sp_min_private.h
@@ -10,5 +10,6 @@
 void sp_min_warm_entrypoint(void);
 void sp_min_main(void);
 void sp_min_warm_boot(void);
+void sp_min_fiq(void);
 
 #endif /* __SP_MIN_H__ */
diff --git a/docs/user-guide.rst b/docs/user-guide.rst
index fe86f23..bedbda8 100644
--- a/docs/user-guide.rst
+++ b/docs/user-guide.rst
@@ -527,6 +527,13 @@
    firmware images have been loaded in memory, and the MMU and caches are
    turned off. Refer to the "Debugging options" section for more details.
 
+- ``SP_MIN_WITH_SECURE_FIQ``: Boolean flag to indicate the SP_MIN handles
+   secure interrupts (caught through the FIQ line). Platforms can enable
+   this directive if they need to handle such interruption. When enabled,
+   the FIQ are handled in monitor mode and non secure world is not allowed
+   to mask these events. Platforms that enable FIQ handling in SP_MIN shall
+   implement the api ``sp_min_plat_fiq_handler()``. The default value is 0.
+
 -  ``TRUSTED_BOARD_BOOT``: Boolean flag to include support for the Trusted Board
    Boot feature. When set to '1', BL1 and BL2 images include support to load
    and verify the certificates and images in a FIP, and BL1 includes support
diff --git a/include/bl32/sp_min/platform_sp_min.h b/include/bl32/sp_min/platform_sp_min.h
index 70c5c14..6c7e0cc 100644
--- a/include/bl32/sp_min/platform_sp_min.h
+++ b/include/bl32/sp_min/platform_sp_min.h
@@ -17,4 +17,7 @@
 void sp_min_plat_arch_setup(void);
 entry_point_info_t *sp_min_plat_get_bl33_ep_info(void);
 
+/* Platforms that enable SP_MIN_WITH_SECURE_FIQ shall implement this api */
+void sp_min_plat_fiq_handler(uint32_t id);
+
 #endif /* __PLATFORM_SP_MIN_H__ */