diff --git a/plat/layerscape/board/ls1043/aarch64/ls1043_helpers.S b/plat/layerscape/board/ls1043/aarch64/ls1043_helpers.S
new file mode 100644
index 0000000..80524fc
--- /dev/null
+++ b/plat/layerscape/board/ls1043/aarch64/ls1043_helpers.S
@@ -0,0 +1,147 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <platform_def.h>
+
+	.globl	plat_reset_handler
+	.globl  plat_my_core_pos
+	.globl  platform_mem_init
+
+func plat_my_core_pos
+	mrs x0, mpidr_el1
+	and x1, x0, #MPIDR_CPU_MASK   //reserve the last 8 bits
+	and x0, x0, #MPIDR_CLUSTER_MASK
+	add x0, x1, x0, LSR #4  //4 cores
+	ret
+endfunc plat_my_core_pos
+
+func platform_mem_init
+	mov x29, x30
+	bl  inv_dcache_range
+
+//SDRAM_CFG
+	ldr w0, =0x1080000
+	ldr w1, =0x0c000c45
+	str w1, [x0, #0x110]
+//CS0_BNDS
+	ldr w1, =0x7f000000
+	str w1, [x0, #0x000]
+//CS0_CONFIG
+	ldr w1, =0x22030480
+	str w1, [x0, #0x080]
+//TIMING_CFG_0
+	ldr w1, =0x18005591
+	str w1, [x0, #0x104]
+//TIMING_CFG_1
+	ldr w1, =0x428cb4bb
+	str w1, [x0, #0x108]
+//TIMING_CFG_2
+	ldr w1, =0x11c14800
+	str w1, [x0, #0x10C]
+//TIMING_CFG_3
+	ldr w1, =0x00100c01
+	str w1, [x0, #0x100]
+//TIMING_CFG_4
+	ldr w1, =0x02000000
+	str w1, [x0, #0x160]
+//TIMING_CFG_5
+	ldr w1, =0x00144003
+	str w1, [x0, #0x164]
+//TIMING_CFG_7
+	ldr w1, =0x00003013
+	str w1, [x0, #0x16C]
+//TIMING_CFG_8
+	ldr w1, =0x00561102
+	str w1, [x0, #0x250]
+//SDRAM_CFG_2
+	ldr w1, =0x00114000
+	str w1, [x0, #0x114]
+//SDRAM_MODE
+	ldr w1, =0x10020103
+	str w1, [x0, #0x118]
+//SDRAM_MODE_2
+	ldr w1, =0x0
+	str w1, [x0, #0x11C]
+//SDRAM_INTERVAL
+	ldr w1, =0x18066018
+	str w1, [x0, #0x124]
+//DDR_WRLVL_CNTL
+	ldr w1, =0x07f675c6
+	str w1, [x0, #0x174]
+//DDR_WRLVL_CNTL_2
+	ldr w1, =0x00080907
+	str w1, [x0, #0x190]
+//DDR_WRLVL_CNTL_3
+	ldr w1, =0x0
+	str w1, [x0, #0x194]
+//DDR_CDR1
+	ldr w1, =0x00000480
+	str w1, [x0, #0xB28]
+//DDR_CDR2
+	ldr w1, =0x81a10000
+	str w1, [x0, #0xB2C]
+//SDRAM_CLK_CNTL
+	ldr w1, =0x00000003
+	str w1, [x0, #0x130]
+//DDR_ZQ_CNTL
+	ldr w1, =0x0507098a
+	str w1, [x0, #0x170]
+//SDRAM_MODE_9
+	ldr w1, =0x00050000
+	str w1, [x0, #0x220]
+//SDRAM_MODE_10
+	ldr w1, =0x00000004
+	str w1, [x0, #0x224]
+//CS0_CONFIG_2
+	ldr w1, =0x0
+	str w1, [x0, #0x0C0]
+//SDRAM_CFG
+	ldr w1, =0x08000cc5
+	str w1, [x0, #0x110]
+
+	mov w3,#0
+	ldr w4,=0xffffff01
+z_loop:
+delay_loop1:
+	sub w4, w4, #1
+	cmp w4, #0
+	b.gt    delay_loop1
+
+	ldr w1, [x0, #0x114]
+	add w3, w3, #1
+	cmp       w1, #0 //'\n'
+	b.eq       1f
+	cmp w3, #20
+	b.gt    1f
+	b z_loop
+
+1:
+	ldr w4,=0xffffff02
+delay_loop2:
+	sub w4, w4, #1
+	cmp w4, #0
+	b.gt        delay_loop2
+
+	ldr w1, =0x00000000
+	str w1, [x0]
+
+	ret x29
+endfunc	platform_mem_init
+
+func apply_platform_errata
+	/*TODO if needed*/
+	ret
+endfunc apply_platform_errata
+
+func plat_reset_handler
+	mov x29, x30
+	bl  apply_platform_errata
+
+	mov x30, x29
+	ret
+endfunc plat_reset_handler
diff --git a/plat/layerscape/board/ls1043/include/ls_def.h b/plat/layerscape/board/ls1043/include/ls_def.h
new file mode 100644
index 0000000..1015129
--- /dev/null
+++ b/plat/layerscape/board/ls1043/include/ls_def.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __LS_DEF_H__
+#define __LS_DEF_H__
+
+#include <arch.h>
+#include <common_def.h>
+#include <platform_def.h>
+#include <tbbr_img_def.h>
+#include <utils_def.h>
+#include <xlat_tables_defs.h>
+
+
+/******************************************************************************
+ * Definitions common to all ARM standard platforms
+ *****************************************************************************/
+/* Special value used to verify platform parameters from BL2 to BL31 */
+#define LS_BL31_PLAT_PARAM_VAL		0x0f1e2d3c4b5a6978ULL
+
+#define LS_CACHE_WRITEBACK_SHIFT	6
+
+/*
+ * Macros mapping the MPIDR Affinity levels to Layerscape Platform Power levels. The
+ * power levels have a 1:1 mapping with the MPIDR affinity levels.
+ */
+#define LS_PWR_LVL0		MPIDR_AFFLVL0
+#define LS_PWR_LVL1		MPIDR_AFFLVL1
+#define LS_PWR_LVL2		MPIDR_AFFLVL2
+
+/*
+ *  Macros for local power states in Layerscape platforms encoded by State-ID field
+ *  within the power-state parameter.
+ */
+/* Local power state for power domains in Run state. */
+#define LS_LOCAL_STATE_RUN	0
+/* Local power state for retention. Valid only for CPU power domains */
+#define LS_LOCAL_STATE_RET	1
+/*
+ * Local power state for OFF/power-down. Valid for CPU and cluster power
+ * domains
+ */
+#define LS_LOCAL_STATE_OFF	2
+
+#define LS_MAP_NS_DRAM		MAP_REGION_FLAT( \
+					(LS_NS_DRAM_BASE), \
+					LS_DRAM1_SIZE, \
+					MT_DEVICE | MT_RW | MT_NS)
+
+#define LS_MAP_TSP_SEC_MEM	MAP_REGION_FLAT( \
+					TSP_SEC_MEM_BASE, \
+					TSP_SEC_MEM_SIZE, \
+				MT_DEVICE | MT_RW | MT_SECURE)
+
+
+#define LS_MAP_FLASH0_RW	MAP_REGION_FLAT(PLAT_LS_FLASH_BASE,\
+					PLAT_LS_FLASH_SIZE, \
+					MT_DEVICE | MT_RW)
+
+#define LS_MAP_CCSR		MAP_REGION_FLAT(PLAT_LS_CCSR_BASE, \
+					PLAT_LS_CCSR_SIZE, \
+					MT_DEVICE | MT_RW | MT_SECURE)
+
+
+#define LS_MAP_CONSOLE		MAP_REGION_FLAT(PLAT_LS1043_DUART1_BASE, \
+					PLAT_LS1043_DUART_SIZE, \
+					MT_DEVICE | MT_RW | MT_NS)
+
+/*
+ * The number of regions like RO(code), coherent and data required by
+ * different BL stages which need to be mapped in the MMU.
+ */
+/******************************************************************************
+ * Required platform porting definitions common to all ARM standard platforms
+ *****************************************************************************/
+
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ull << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ull << 32)
+
+/*
+ * This macro defines the deepest retention state possible. A higher state
+ * id will represent an invalid or a power down state.
+ */
+#define PLAT_MAX_RET_STATE		LS_LOCAL_STATE_RET
+
+/*
+ * This macro defines the deepest power down states possible. Any state ID
+ * higher than this is invalid.
+ */
+#define PLAT_MAX_OFF_STATE		LS_LOCAL_STATE_OFF
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_GRANULE		(1 << LS_CACHE_WRITEBACK_SHIFT)
+
+/*
+ * One cache line needed for bakery locks on Layerscape platforms
+ */
+#define PLAT_PERCPU_BAKERY_LOCK_SIZE		(1 * CACHE_WRITEBACK_GRANULE)
+
+#endif /* __LS_DEF_H__ */
diff --git a/plat/layerscape/board/ls1043/include/ns_access.h b/plat/layerscape/board/ls1043/include/ns_access.h
new file mode 100644
index 0000000..6ed7bc0
--- /dev/null
+++ b/plat/layerscape/board/ls1043/include/ns_access.h
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __FSL_NS_ACCESS_H_
+#define __FSL_NS_ACCESS_H_
+
+#include "fsl_csu.h"
+
+enum csu_cslx_ind {
+	CSU_CSLX_PCIE2_IO = 0,
+	CSU_CSLX_PCIE1_IO,
+	CSU_CSLX_MG2TPR_IP,
+	CSU_CSLX_IFC_MEM,
+	CSU_CSLX_OCRAM,
+	CSU_CSLX_GIC,
+	CSU_CSLX_PCIE1,
+	CSU_CSLX_OCRAM2,
+	CSU_CSLX_QSPI_MEM,
+	CSU_CSLX_PCIE2,
+	CSU_CSLX_SATA,
+	CSU_CSLX_USB1,
+	CSU_CSLX_QM_BM_SWPORTAL,
+	CSU_CSLX_PCIE3 = 16,
+	CSU_CSLX_PCIE3_IO,
+	CSU_CSLX_USB3 = 20,
+	CSU_CSLX_USB2,
+	CSU_CSLX_PFE = 23,
+	CSU_CSLX_SERDES = 32,
+	CSU_CSLX_QDMA,
+	CSU_CSLX_LPUART2,
+	CSU_CSLX_LPUART1,
+	CSU_CSLX_LPUART4,
+	CSU_CSLX_LPUART3,
+	CSU_CSLX_LPUART6,
+	CSU_CSLX_LPUART5,
+	CSU_CSLX_DSPI1 = 41,
+	CSU_CSLX_QSPI,
+	CSU_CSLX_ESDHC,
+	CSU_CSLX_IFC = 45,
+	CSU_CSLX_I2C1,
+	CSU_CSLX_USB_2,
+	CSU_CSLX_I2C3 = 48,
+	CSU_CSLX_I2C2,
+	CSU_CSLX_DUART2 = 50,
+	CSU_CSLX_DUART1,
+	CSU_CSLX_WDT2,
+	CSU_CSLX_WDT1,
+	CSU_CSLX_EDMA,
+	CSU_CSLX_SYS_CNT,
+	CSU_CSLX_DMA_MUX2,
+	CSU_CSLX_DMA_MUX1,
+	CSU_CSLX_DDR,
+	CSU_CSLX_QUICC,
+	CSU_CSLX_DCFG_CCU_RCPM = 60,
+	CSU_CSLX_SECURE_BOOTROM,
+	CSU_CSLX_SFP,
+	CSU_CSLX_TMU,
+	CSU_CSLX_SECURE_MONITOR,
+	CSU_CSLX_SCFG,
+	CSU_CSLX_FM = 66,
+	CSU_CSLX_SEC5_5,
+	CSU_CSLX_BM,
+	CSU_CSLX_QM,
+	CSU_CSLX_GPIO2 = 70,
+	CSU_CSLX_GPIO1,
+	CSU_CSLX_GPIO4,
+	CSU_CSLX_GPIO3,
+	CSU_CSLX_PLATFORM_CONT,
+	CSU_CSLX_CSU,
+	CSU_CSLX_IIC4 = 77,
+	CSU_CSLX_WDT4,
+	CSU_CSLX_WDT3,
+	CSU_CSLX_ESDHC2 = 80,
+	CSU_CSLX_WDT5 = 81,
+	CSU_CSLX_SAI2,
+	CSU_CSLX_SAI1,
+	CSU_CSLX_SAI4,
+	CSU_CSLX_SAI3,
+	CSU_CSLX_FTM2 = 86,
+	CSU_CSLX_FTM1,
+	CSU_CSLX_FTM4,
+	CSU_CSLX_FTM3,
+	CSU_CSLX_FTM6 = 90,
+	CSU_CSLX_FTM5,
+	CSU_CSLX_FTM8,
+	CSU_CSLX_FTM7,
+	CSU_CSLX_DSCR = 121,
+};
+
+static struct csu_ns_dev ns_dev[] = {
+	 {CSU_CSLX_PCIE2_IO, CSU_ALL_RW},
+	 {CSU_CSLX_PCIE1_IO, CSU_ALL_RW},
+	 {CSU_CSLX_MG2TPR_IP, CSU_ALL_RW},
+	 {CSU_CSLX_IFC_MEM, CSU_ALL_RW},
+	 {CSU_CSLX_OCRAM, CSU_ALL_RW},
+	 {CSU_CSLX_GIC, CSU_ALL_RW},
+	 {CSU_CSLX_PCIE1, CSU_ALL_RW},
+	 {CSU_CSLX_OCRAM2, CSU_ALL_RW},
+	 {CSU_CSLX_QSPI_MEM, CSU_ALL_RW},
+	 {CSU_CSLX_PCIE2, CSU_ALL_RW},
+	 {CSU_CSLX_SATA, CSU_ALL_RW},
+	 {CSU_CSLX_USB1, CSU_ALL_RW},
+	 {CSU_CSLX_QM_BM_SWPORTAL, CSU_ALL_RW},
+	 {CSU_CSLX_PCIE3, CSU_ALL_RW},
+	 {CSU_CSLX_PCIE3_IO, CSU_ALL_RW},
+	 {CSU_CSLX_USB3, CSU_ALL_RW},
+	 {CSU_CSLX_USB2, CSU_ALL_RW},
+	 {CSU_CSLX_PFE, CSU_ALL_RW},
+	 {CSU_CSLX_SERDES, CSU_ALL_RW},
+	 {CSU_CSLX_QDMA, CSU_ALL_RW},
+	 {CSU_CSLX_LPUART2, CSU_ALL_RW},
+	 {CSU_CSLX_LPUART1, CSU_ALL_RW},
+	 {CSU_CSLX_LPUART4, CSU_ALL_RW},
+	 {CSU_CSLX_LPUART3, CSU_ALL_RW},
+	 {CSU_CSLX_LPUART6, CSU_ALL_RW},
+	 {CSU_CSLX_LPUART5, CSU_ALL_RW},
+	 {CSU_CSLX_DSPI1, CSU_ALL_RW},
+	 {CSU_CSLX_QSPI, CSU_ALL_RW},
+	 {CSU_CSLX_ESDHC, CSU_ALL_RW},
+	 {CSU_CSLX_IFC, CSU_ALL_RW},
+	 {CSU_CSLX_I2C1, CSU_ALL_RW},
+	 {CSU_CSLX_USB_2, CSU_ALL_RW},
+	 {CSU_CSLX_I2C3, CSU_ALL_RW},
+	 {CSU_CSLX_I2C2, CSU_ALL_RW},
+	 {CSU_CSLX_DUART2, CSU_ALL_RW},
+	 {CSU_CSLX_DUART1, CSU_ALL_RW},
+	 {CSU_CSLX_WDT2, CSU_ALL_RW},
+	 {CSU_CSLX_WDT1, CSU_ALL_RW},
+	 {CSU_CSLX_EDMA, CSU_ALL_RW},
+	 {CSU_CSLX_SYS_CNT, CSU_ALL_RW},
+	 {CSU_CSLX_DMA_MUX2, CSU_ALL_RW},
+	 {CSU_CSLX_DMA_MUX1, CSU_ALL_RW},
+	 {CSU_CSLX_DDR, CSU_ALL_RW},
+	 {CSU_CSLX_QUICC, CSU_ALL_RW},
+	 {CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW},
+	 {CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW},
+	 {CSU_CSLX_SFP, CSU_ALL_RW},
+	 {CSU_CSLX_TMU, CSU_ALL_RW},
+	 {CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW},
+	 {CSU_CSLX_SCFG, CSU_ALL_RW},
+	 {CSU_CSLX_FM, CSU_ALL_RW},
+	 {CSU_CSLX_SEC5_5, CSU_ALL_RW},
+	 {CSU_CSLX_BM, CSU_ALL_RW},
+	 {CSU_CSLX_QM, CSU_ALL_RW},
+	 {CSU_CSLX_GPIO2, CSU_ALL_RW},
+	 {CSU_CSLX_GPIO1, CSU_ALL_RW},
+	 {CSU_CSLX_GPIO4, CSU_ALL_RW},
+	 {CSU_CSLX_GPIO3, CSU_ALL_RW},
+	 {CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW},
+	 {CSU_CSLX_CSU, CSU_ALL_RW},
+	 {CSU_CSLX_IIC4, CSU_ALL_RW},
+	 {CSU_CSLX_WDT4, CSU_ALL_RW},
+	 {CSU_CSLX_WDT3, CSU_ALL_RW},
+	 {CSU_CSLX_ESDHC2, CSU_ALL_RW},
+	 {CSU_CSLX_WDT5, CSU_ALL_RW},
+	 {CSU_CSLX_SAI2, CSU_ALL_RW},
+	 {CSU_CSLX_SAI1, CSU_ALL_RW},
+	 {CSU_CSLX_SAI4, CSU_ALL_RW},
+	 {CSU_CSLX_SAI3, CSU_ALL_RW},
+	 {CSU_CSLX_FTM2, CSU_ALL_RW},
+	 {CSU_CSLX_FTM1, CSU_ALL_RW},
+	 {CSU_CSLX_FTM4, CSU_ALL_RW},
+	 {CSU_CSLX_FTM3, CSU_ALL_RW},
+	 {CSU_CSLX_FTM6, CSU_ALL_RW},
+	 {CSU_CSLX_FTM5, CSU_ALL_RW},
+	 {CSU_CSLX_FTM8, CSU_ALL_RW},
+	 {CSU_CSLX_FTM7, CSU_ALL_RW},
+	 {CSU_CSLX_DSCR, CSU_ALL_RW},
+};
+
+#endif
diff --git a/plat/layerscape/board/ls1043/include/plat_macros.S b/plat/layerscape/board/ls1043/include/plat_macros.S
new file mode 100644
index 0000000..8163dc1
--- /dev/null
+++ b/plat/layerscape/board/ls1043/include/plat_macros.S
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __PLAT_MACROS_S__
+#define __PLAT_MACROS_S__
+
+	/* ---------------------------------------------
+	 * The below required platform porting macro
+	 * prints out relevant GIC and CCI registers
+	 * whenever an unhandled exception is taken in
+	 * BL31.
+	 * Clobbers: x0 - x10, x16, x17, sp
+	 * ---------------------------------------------
+	 */
+	.macro plat_crash_print_regs
+	.endm
+
+#endif /* __PLAT_MACROS_S__ */
diff --git a/plat/layerscape/board/ls1043/include/platform_def.h b/plat/layerscape/board/ls1043/include/platform_def.h
new file mode 100644
index 0000000..0e1cae6
--- /dev/null
+++ b/plat/layerscape/board/ls1043/include/platform_def.h
@@ -0,0 +1,212 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __PLATFORM_DEF_H__
+#define __PLATFORM_DEF_H__
+
+#include <common_def.h>
+#include <tzc400.h>
+#include <utils.h>
+#include "ls_def.h"
+
+#define FIRMWARE_WELCOME_STR_LS1043	"Welcome to LS1043 BL1 Phase\n"
+#define FIRMWARE_WELCOME_STR_LS1043_BL2	"Welcome to LS1043 BL2 Phase\n"
+#define FIRMWARE_WELCOME_STR_LS1043_BL31 "Welcome to LS1043 BL31 Phase\n"
+#define FIRMWARE_WELCOME_STR_LS1043_BL32 "Welcome to LS1043 BL32 Phase, TSP\n"
+
+/* Required platform porting definitions */
+#define PLAT_PRIMARY_CPU		0x0
+#define PLAT_MAX_PWR_LVL		LS_PWR_LVL1
+#define PLATFORM_CORE_COUNT		4
+#define COUNTER_FREQUENCY		25000000	/* 25MHz */
+
+/*
+ * Required LS standard platform porting definitions
+ */
+#define PLAT_LS_CLUSTER_COUNT			1
+#define PLAT_LS1043_CCI_CLUSTER0_SL_IFACE_IX	4
+#define LS1043_CLUSTER_COUNT			1
+#define LS1043_MAX_CPUS_PER_CLUSTER		4
+
+#define LS_DRAM1_BASE			0x80000000
+#define LS_DRAM2_BASE			0x880000000
+#define LS_DRAM2_SIZE			0x780000000	/* 30G */
+#define LS_DRAM1_SIZE			0x80000000	/* 2G */
+#define LS_NS_DRAM_BASE			LS_DRAM1_BASE
+/* 64M Secure Memory, in fact there a 2M non-secure hole on top of it */
+#define LS_SECURE_DRAM_SIZE		(64 * 1024 * 1024)
+#define LS_SECURE_DRAM_BASE		(LS_NS_DRAM_BASE + LS_DRAM1_SIZE - \
+						LS_SECURE_DRAM_SIZE)
+#define LS_NS_DRAM_SIZE			(LS_DRAM1_SIZE - LS_SECURE_DRAM_SIZE)
+
+/*
+ * By default, BL2 is in DDR memory.
+ * If LS_BL2_IN_OCRAM is defined, BL2 will in OCRAM
+ */
+/* #define LS_BL2_IN_OCRAM */
+
+#ifndef LS_BL2_IN_OCRAM
+/*
+ * on top of SECURE memory is 2M non-secure hole for OPTee,
+ *  1M secure memory below this hole will be used for BL2.
+ */
+#define LS_BL2_DDR_BASE			(LS_SECURE_DRAM_BASE + \
+						LS_SECURE_DRAM_SIZE \
+						- 3 * 1024 * 1024)
+#endif
+
+#define PLAT_LS_CCSR_BASE		0x1000000
+#define PLAT_LS_CCSR_SIZE		0xF000000
+
+/* Flash base address, currently ROM is not used for TF-A images on LS platforms */
+#define PLAT_LS_TRUSTED_ROM_BASE	0x60100000
+#define PLAT_LS_TRUSTED_ROM_SIZE	0x20000000	/* Flash size */
+#define PLAT_LS_FLASH_SIZE		0x20000000
+#define PLAT_LS_FLASH_BASE		0x60000000
+
+#define LS_SRAM_BASE			0x10000000
+#define LS_SRAM_LIMIT			0x10020000	/* 128K */
+#define LS_SRAM_SHARED_SIZE		0x1000		/* 4K */
+#define LS_SRAM_SIZE			(LS_SRAM_LIMIT - LS_SRAM_BASE)
+#define LS_BL_RAM_BASE			(LS_SRAM_BASE + LS_SRAM_SHARED_SIZE)
+
+#define PLAT_LS_FIP_MAX_SIZE		0x4000000
+
+/* Memory Layout */
+
+#define BL1_RO_BASE			PLAT_LS_TRUSTED_ROM_BASE
+#define BL1_RO_LIMIT			(PLAT_LS_TRUSTED_ROM_BASE	\
+					 + PLAT_LS_TRUSTED_ROM_SIZE)
+#define PLAT_LS_FIP_BASE		0x60120000
+
+#ifdef LS_BL2_IN_OCRAM
+/* BL2 is in OCRAM */
+#define PLAT_LS_MAX_BL1_RW_SIZE		(52 * 1024)		/* 52K */
+#define PLAT_LS_MAX_BL31_SIZE		(64 * 1024)		/* 64K */
+#define PLAT_LS_MAX_BL2_SIZE		(44 * 1024)		/* 44K */
+/* Reserve memory in OCRAM for BL31 Text and ROData segment */
+#define BL31_TEXT_RODATA_SIZE		(32 * 1024)		/* 32K */
+#else /* LS_BL2_IN_OCRAM */
+/* BL2 in DDR */
+#define PLAT_LS_MAX_BL1_RW_SIZE		(64 * 1024)		/* 64K */
+#define PLAT_LS_MAX_BL31_SIZE		(64 * 1024)		/* 64K */
+#define PLAT_LS_MAX_BL2_SIZE		(1 * 1024 * 1024)	/* 1M */
+#endif /* LS_BL2_IN_OCRAM */
+/*
+ * Put BL31 at the start of OCRAM.
+ */
+#define BL31_BASE			LS_SRAM_BASE
+#define BL31_LIMIT			(LS_SRAM_BASE + PLAT_LS_MAX_BL31_SIZE)
+
+#ifdef LS_BL2_IN_OCRAM
+/*
+ * BL2 follow BL31 Text and ROData region.
+ */
+#define BL2_BASE			(BL31_BASE + BL31_TEXT_RODATA_SIZE)
+#define BL2_LIMIT			(BL2_BASE + PLAT_LS_MAX_BL2_SIZE)
+
+#else
+/*
+ * BL2 in DDR memory.
+ */
+#define BL2_BASE			LS_BL2_DDR_BASE
+#define BL2_LIMIT			(BL2_BASE + PLAT_LS_MAX_BL2_SIZE)
+
+#endif
+
+/*
+ * Put BL1 RW at the top of the Trusted SRAM.
+ */
+#ifdef LS_BL2_IN_OCRAM
+#define BL1_RW_BASE			BL2_LIMIT
+#else
+#define BL1_RW_BASE			BL31_LIMIT
+#endif
+#define BL1_RW_LIMIT			LS_SRAM_LIMIT
+
+/* Put BL32 in secure memory */
+#define BL32_BASE		LS_SECURE_DRAM_BASE
+#define BL32_LIMIT		(LS_SECURE_DRAM_BASE + LS_SECURE_DRAM_SIZE)
+/* BL33 memory region */
+#define BL33_BASE		0x82000000
+#define BL33_LIMIT		(LS_NS_DRAM_BASE + LS_NS_DRAM_SIZE)
+
+/*******************************************************************************
+ * BL32 specific defines.
+ ******************************************************************************/
+/*
+ * On ARM standard platforms, the TSP can execute from Trusted SRAM,
+ * Trusted DRAM (if available) or the DRAM region secured by the TrustZone
+ * controller.
+ */
+
+#define TSP_SEC_MEM_BASE		BL32_BASE
+#define TSP_SEC_MEM_SIZE		(BL32_LIMIT - BL32_BASE)
+
+/*
+ * ID of the secure physical generic timer interrupt used by the TSP.
+ */
+#define TSP_IRQ_SEC_PHY_TIMER		29
+
+
+/*
+ * GIC related constants
+ */
+#define PLAT_LS1043_CCI_BASE		0x01180000
+#define GICD_BASE			0x01401000
+#define GICC_BASE			0x01402000
+#define GICD_BASE_64K			0x01410000
+#define GICC_BASE_64K			0x01420000
+
+#define DCFG_CCSR_SVR			0x1ee00a4
+#define REV1_0				0x10
+#define REV1_1				0x11
+#define GIC_ADDR_BIT			31
+#define SCFG_GIC400_ALIGN		0x1570188
+
+/* UART related definition */
+
+#define PLAT_LS1043_DUART1_BASE		0x021c0000
+#define PLAT_LS1043_DUART2_BASE		0x021d0000
+#define PLAT_LS1043_DUART_SIZE		0x10000
+
+#define PLAT_LS1043_UART_BASE		0x21c0500
+#define PLAT_LS1043_UART2_BASE		0x21c0600
+#define PLAT_LS1043_UART_CLOCK		400000000
+#define PLAT_LS1043_UART_BAUDRATE	115200
+/* Define UART to be used by TF-A log */
+#define LS_TF_UART_BASE		PLAT_LS1043_UART_BASE
+#define LS_TF_UART_CLOCK		PLAT_LS1043_UART_CLOCK
+#define LS_TF_UART_BAUDRATE		PLAT_LS1043_UART_BAUDRATE
+
+#define LS1043_SYS_CNTCTL_BASE		0x2B00000
+
+#define CONFIG_SYS_IMMR			0x01000000
+#define CONFIG_SYS_FSL_CSU_ADDR		(CONFIG_SYS_IMMR + 0x00510000)
+
+/* Size of cacheable stacks */
+#if defined(IMAGE_BL1)
+#define PLATFORM_STACK_SIZE		0x440
+#define MAX_MMAP_REGIONS		6
+#define MAX_XLAT_TABLES			4
+#elif defined(IMAGE_BL2)
+#define PLATFORM_STACK_SIZE		0x400
+#define MAX_MMAP_REGIONS		8
+#define MAX_XLAT_TABLES			6
+#elif defined(IMAGE_BL31)
+#define PLATFORM_STACK_SIZE		0x400
+#define MAX_MMAP_REGIONS		8
+#define MAX_XLAT_TABLES			4
+#elif defined(IMAGE_BL32)
+#define PLATFORM_STACK_SIZE		0x440
+#define MAX_MMAP_REGIONS		8
+#define MAX_XLAT_TABLES			9
+#endif
+
+#define MAX_IO_DEVICES			3
+#define MAX_IO_HANDLES			4
+
+#endif /* __PLATFORM_DEF_H__ */
diff --git a/plat/layerscape/board/ls1043/include/soc_tzasc.h b/plat/layerscape/board/ls1043/include/soc_tzasc.h
new file mode 100644
index 0000000..0039f2d
--- /dev/null
+++ b/plat/layerscape/board/ls1043/include/soc_tzasc.h
@@ -0,0 +1,93 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _SOC_TZASC_H_
+#define _SOC_TZASC_H_
+
+#include "tzc380.h"
+
+#define MAX_NUM_TZC_REGION	3
+
+/* TZASC related constants */
+#define TZASC_CONFIGURATION_REG		0x000
+#define TZASC_SECURITY_INV_REG		0x034
+#define TZASC_SECURITY_INV_EN		0x1
+#define TZASC_REGIONS_REG		0x100
+/* As region address should address atleast 32KB memory. */
+#define TZASC_REGION_LOWADDR_MASK	0xFFFF8000
+#define TZASC_REGION_LOWADDR_OFFSET	0x0
+#define TZASC_REGION_HIGHADDR_OFFSET	0x4
+#define TZASC_REGION_ATTR_OFFSET	0x8
+#define TZASC_REGION_ENABLED		1
+#define TZASC_REGION_DISABLED		0
+#define TZASC_REGION_SIZE_32KB		0xE
+#define TZASC_REGION_SIZE_64KB		0xF
+#define TZASC_REGION_SIZE_128KB		0x10
+#define TZASC_REGION_SIZE_256KB		0x11
+#define TZASC_REGION_SIZE_512KB		0x12
+#define TZASC_REGION_SIZE_1MB		0x13
+#define TZASC_REGION_SIZE_2MB		0x14
+#define TZASC_REGION_SIZE_4MB		0x15
+#define TZASC_REGION_SIZE_8MB		0x16
+#define TZASC_REGION_SIZE_16MB		0x17
+#define TZASC_REGION_SIZE_32MB		0x18
+#define TZASC_REGION_SIZE_64MB		0x19
+#define TZASC_REGION_SIZE_128MB		0x1A
+#define TZASC_REGION_SIZE_256MB		0x1B
+#define TZASC_REGION_SIZE_512MB		0x1C
+#define TZASC_REGION_SIZE_1GB		0x1D
+#define TZASC_REGION_SIZE_2GB		0x1E
+#define TZASC_REGION_SIZE_4GB		0x1F
+#define TZASC_REGION_SIZE_8GB		0x20
+#define TZASC_REGION_SIZE_16GB		0x21
+#define TZASC_REGION_SIZE_32GB		0x22
+#define TZASC_REGION_SECURITY_SR	(1 << 3)
+#define TZASC_REGION_SECURITY_SW	(1 << 2)
+#define TZASC_REGION_SECURITY_SRW	(TZASC_REGION_SECURITY_SR| \
+						TZASC_REGION_SECURITY_SW)
+#define TZASC_REGION_SECURITY_NSR	(1 << 1)
+#define TZASC_REGION_SECURITY_NSW	1
+#define TZASC_REGION_SECURITY_NSRW	(TZASC_REGION_SECURITY_NSR| \
+						TZASC_REGION_SECURITY_NSW)
+
+#define CSU_SEC_ACCESS_REG_OFFSET	0x21C
+#define TZASC_BYPASS_MUX_DISABLE	0x4
+#define CCI_TERMINATE_BARRIER_TX	0x8
+#define CONFIG_SYS_FSL_TZASC_ADDR	0x1500000
+
+/* List of MAX_NUM_TZC_REGION TZC regions' boundaries and configurations. */
+
+static const struct tzc380_reg tzc380_reg_list[] = {
+	{
+		TZASC_REGION_SECURITY_NSRW,	/* .secure attr */
+		0x0,			/* .enabled */
+		0x0,			/* .lowaddr */
+		0x0,			/* .highaddr */
+		0x0,			/* .size */
+		0x0,			/* .submask */
+	},
+	{
+		TZASC_REGION_SECURITY_SRW,
+		TZASC_REGION_ENABLED,
+		0xFC000000,
+		0x0,
+		TZASC_REGION_SIZE_64MB,
+		0x80,			/* Disable region 7 */
+	},
+	/* reserve 2M non-scure memory for OPTEE public memory */
+	{
+		TZASC_REGION_SECURITY_SRW,
+		TZASC_REGION_ENABLED,
+		0xFF800000,
+		0x0,
+		TZASC_REGION_SIZE_8MB,
+		0xC0,			/* Disable region 6 & 7 */
+	},
+
+	{}
+};
+
+#endif /* _SOC_TZASC_H_ */
diff --git a/plat/layerscape/board/ls1043/ls1043_bl1_setup.c b/plat/layerscape/board/ls1043/ls1043_bl1_setup.c
new file mode 100644
index 0000000..e82a1fb
--- /dev/null
+++ b/plat/layerscape/board/ls1043/ls1043_bl1_setup.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <cci.h>
+#include <debug.h>
+#include <mmio.h>
+#include "plat_ls.h"
+
+static const int cci_map[] = {
+	PLAT_LS1043_CCI_CLUSTER0_SL_IFACE_IX
+};
+
+void bl1_platform_setup(void)
+{
+	NOTICE(FIRMWARE_WELCOME_STR_LS1043);
+
+	ls_bl1_platform_setup();
+
+	/*
+	 * Initialize system level generic timer for Layerscape Socs.
+	 */
+	ls_delay_timer_init();
+
+	/* TODO: remove these DDR code */
+	VERBOSE("CS0_BNDS = %x\n", mmio_read_32(0x1080000 + 0x000));
+	mmio_write_32(0x1080000 + 0x000, 0x7f000000);
+	VERBOSE("CS0_BNDS = %x\n", mmio_read_32(0x1080000 + 0x000));
+}
+
+/*******************************************************************************
+ * Perform any BL1 specific platform actions.
+ ******************************************************************************/
+void bl1_early_platform_setup(void)
+{
+	ls_bl1_early_platform_setup();
+
+	/*
+	 * Initialize Interconnect for this cluster during cold boot.
+	 * No need for locks as no other CPU is active.
+	 */
+	cci_init(PLAT_LS1043_CCI_BASE, cci_map, ARRAY_SIZE(cci_map));
+
+	/*
+	 * Enable coherency in Interconnect for the primary CPU's cluster.
+	 */
+	cci_enable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr()));
+
+}
+
+unsigned int bl1_plat_get_next_image_id(void)
+{
+	return BL2_IMAGE_ID;
+}
diff --git a/plat/layerscape/board/ls1043/ls1043_bl2_setup.c b/plat/layerscape/board/ls1043/ls1043_bl2_setup.c
new file mode 100644
index 0000000..b529aa5
--- /dev/null
+++ b/plat/layerscape/board/ls1043/ls1043_bl2_setup.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <mmio.h>
+#include <debug.h>
+#include "plat_ls.h"
+
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+		u_register_t arg2, u_register_t arg3)
+{
+	ls_bl2_early_platform_setup((meminfo_t *)arg1);
+
+	/*
+	 * Initialize system level generic timer for Layerscape Socs.
+	 */
+	ls_delay_timer_init();
+}
+
+void bl2_platform_setup(void)
+{
+	NOTICE(FIRMWARE_WELCOME_STR_LS1043_BL2);
+}
diff --git a/plat/layerscape/board/ls1043/ls1043_bl31_setup.c b/plat/layerscape/board/ls1043/ls1043_bl31_setup.c
new file mode 100644
index 0000000..3473d98
--- /dev/null
+++ b/plat/layerscape/board/ls1043/ls1043_bl31_setup.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <cci.h>
+#include <debug.h>
+#include "plat_ls.h"
+#include "fsl_csu.h"
+
+/* slave interfaces according to the RM */
+static const int cci_map[] = {
+	4,
+};
+
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+		u_register_t arg2, u_register_t arg3)
+{
+#ifdef LS_BL2_IN_OCRAM
+	unsigned long romem_base = (unsigned long)(&__TEXT_START__);
+	unsigned long romem_size = (unsigned long)(&__RODATA_END__)
+					- romem_base;
+
+	/* Check the Text and RO-Data region size */
+	if (romem_size > BL31_TEXT_RODATA_SIZE) {
+		ERROR("BL31 Text and RO-Data region size exceed reserved memory size\n");
+		panic();
+	}
+#endif
+
+	/*
+	 * Initialize system level generic timer for Layerscape Socs.
+	 */
+	ls_delay_timer_init();
+
+	ls_bl31_early_platform_setup((void *)arg0, (void *)arg3);
+
+	/*
+	 * Initialize the correct interconnect for this cluster during cold
+	 * boot. No need for locks as no other CPU is active.
+	 */
+	cci_init(PLAT_LS1043_CCI_BASE, cci_map, ARRAY_SIZE(cci_map));
+
+	/*
+	 * Enable coherency in interconnect for the primary CPU's cluster.
+	 * Earlier bootloader stages might already do this (e.g. Trusted
+	 * Firmware's BL1 does it) but we can't assume so. There is no harm in
+	 * executing this code twice anyway.
+	 */
+	cci_enable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr()));
+
+	/* Init CSU to enable non-secure access to peripherals */
+	enable_layerscape_ns_access();
+}
diff --git a/plat/layerscape/board/ls1043/ls1043_err.c b/plat/layerscape/board/ls1043/ls1043_err.c
new file mode 100644
index 0000000..e4a2cae
--- /dev/null
+++ b/plat/layerscape/board/ls1043/ls1043_err.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <debug.h>
+#include <errno.h>
+#include <stdint.h>
+
+/*
+ * Error handler
+ */
+void plat_error_handler(int err)
+{
+	switch (err) {
+	case -ENOENT:
+	case -EAUTH:
+		/* ToDo */
+		break;
+	default:
+		/* Unexpected error */
+		break;
+	}
+
+	/* Loop until the watchdog resets the system */
+	for (;;)
+		wfi();
+}
diff --git a/plat/layerscape/board/ls1043/ls1043_psci.c b/plat/layerscape/board/ls1043/ls1043_psci.c
new file mode 100644
index 0000000..a41e79e
--- /dev/null
+++ b/plat/layerscape/board/ls1043/ls1043_psci.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <debug.h>
+#include <errno.h>
+#include <assert.h>
+#include <platform.h>
+#include <psci.h>
+#include <mmio.h>
+#include <sys/endian.h>
+#include <gicv2.h>
+#include <delay_timer.h>
+#include "platform_def.h"
+
+#define LS_SCFG_BASE			0x01570000
+/* register to store warm boot entry, big endian, higher 32bit */
+#define LS_SCFG_SCRATCHRW0_OFFSET	     0x600
+/* register to store warm boot entry, big endian, lower 32bit */
+#define LS_SCFG_SCRATCHRW1_OFFSET	     0x604
+#define LS_SCFG_COREBCR_OFFSET		     0x680
+
+#define LS_DCFG_BASE			0x01EE0000
+#define LS_DCFG_RSTCR_OFFSET		     0x0B0
+#define LS_DCFG_RSTRQMR1_OFFSET		     0x0C0
+#define LS_DCFG_BRR_OFFSET		     0x0E4
+
+#define LS_SCFG_CORE0_SFT_RST_OFFSET		0x130
+#define LS_SCFG_CORE1_SFT_RST_OFFSET		0x134
+#define LS_SCFG_CORE2_SFT_RST_OFFSET		0x138
+#define LS_SCFG_CORE3_SFT_RST_OFFSET		0x13C
+
+#define LS_SCFG_CORESRENCR_OFFSET		0x204
+
+#define LS_SCFG_RVBAR0_0_OFFSET			0x220
+#define LS_SCFG_RVBAR0_1_OFFSET			0x224
+
+#define LS_SCFG_RVBAR1_0_OFFSET			0x228
+#define LS_SCFG_RVBAR1_1_OFFSET			0x22C
+
+#define LS_SCFG_RVBAR2_0_OFFSET			0x230
+#define LS_SCFG_RVBAR2_1_OFFSET			0x234
+
+#define LS_SCFG_RVBAR3_0_OFFSET			0x238
+#define LS_SCFG_RVBAR3_1_OFFSET			0x23C
+
+/* the entry for core warm boot */
+static uintptr_t warmboot_entry;
+
+/* warm reset single core */
+static void ls1043_reset_core(int core_pos)
+{
+	assert(core_pos >= 0 && core_pos < PLATFORM_CORE_COUNT);
+
+	/* set 0 in RVBAR, boot from bootrom at 0x0 */
+	mmio_write_32(LS_SCFG_BASE + LS_SCFG_RVBAR0_0_OFFSET + core_pos * 8,
+		      0);
+	mmio_write_32(LS_SCFG_BASE + LS_SCFG_RVBAR0_1_OFFSET + core_pos * 8,
+		      0);
+
+	dsb();
+	/* enable core soft reset */
+	mmio_write_32(LS_SCFG_BASE + LS_SCFG_CORESRENCR_OFFSET,
+		      htobe32(1 << 31));
+	dsb();
+	isb();
+	/* reset core */
+	mmio_write_32(LS_SCFG_BASE + LS_SCFG_CORE0_SFT_RST_OFFSET +
+			core_pos * 4, htobe32(1 << 31));
+	mdelay(10);
+}
+
+static void __dead2 ls1043_system_reset(void)
+{
+	/* clear reset request mask bits */
+	mmio_write_32(LS_DCFG_BASE + LS_DCFG_RSTRQMR1_OFFSET, 0);
+
+	/* set reset request bit */
+	mmio_write_32(LS_DCFG_BASE + LS_DCFG_RSTCR_OFFSET,
+		      htobe32((uint32_t)0x2));
+
+	/* system will reset; if fail, enter wfi */
+	dsb();
+	isb();
+	wfi();
+
+	panic();
+}
+
+
+static int ls1043_pwr_domain_on(u_register_t mpidr)
+{
+	int core_pos = plat_core_pos_by_mpidr(mpidr);
+	uint32_t core_mask = 1 << core_pos;
+	uint32_t brr;
+
+	assert(core_pos >= 0 && core_pos < PLATFORM_CORE_COUNT);
+
+	/* set warm boot entry */
+	mmio_write_32(LS_SCFG_BASE + LS_SCFG_SCRATCHRW0_OFFSET,
+		htobe32((uint32_t)(warmboot_entry >> 32)));
+
+	mmio_write_32(LS_SCFG_BASE + LS_SCFG_SCRATCHRW1_OFFSET,
+		htobe32((uint32_t)warmboot_entry));
+
+	dsb();
+
+	brr = be32toh(mmio_read_32(LS_DCFG_BASE + LS_DCFG_BRR_OFFSET));
+	if (brr & core_mask) {
+		/* core has been released, must reset it to restart */
+		ls1043_reset_core(core_pos);
+
+		/* set bit in core boot control register to enable boot */
+		mmio_write_32(LS_SCFG_BASE + LS_SCFG_COREBCR_OFFSET,
+			htobe32(core_mask));
+
+	} else {
+		/* set bit in core boot control register to enable boot */
+		mmio_write_32(LS_SCFG_BASE + LS_SCFG_COREBCR_OFFSET,
+			htobe32(core_mask));
+
+		/* release core */
+		mmio_write_32(LS_DCFG_BASE + LS_DCFG_BRR_OFFSET,
+			      htobe32(brr | core_mask));
+	}
+
+	mdelay(20);
+
+	/* wake core in case it is in wfe */
+	dsb();
+	isb();
+	sev();
+
+	return PSCI_E_SUCCESS;
+}
+
+static void ls1043_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+	/* Per cpu gic distributor setup */
+	gicv2_pcpu_distif_init();
+
+	/* Enable the gic CPU interface */
+	gicv2_cpuif_enable();
+}
+
+static void ls1043_pwr_domain_off(const psci_power_state_t *target_state)
+{
+	/* Disable the gic CPU interface */
+	gicv2_cpuif_disable();
+}
+
+static plat_psci_ops_t ls1043_psci_pm_ops = {
+	.system_reset = ls1043_system_reset,
+	.pwr_domain_on = ls1043_pwr_domain_on,
+	.pwr_domain_on_finish = ls1043_pwr_domain_on_finish,
+	.pwr_domain_off = ls1043_pwr_domain_off,
+};
+
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+			const plat_psci_ops_t **psci_ops)
+{
+	warmboot_entry = sec_entrypoint;
+	*psci_ops = &ls1043_psci_pm_ops;
+	return 0;
+}
diff --git a/plat/layerscape/board/ls1043/ls1043_security.c b/plat/layerscape/board/ls1043/ls1043_security.c
new file mode 100644
index 0000000..18ae56e
--- /dev/null
+++ b/plat/layerscape/board/ls1043/ls1043_security.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "plat_ls.h"
+
+/*
+ * We assume that all security programming is done by the primary core.
+ */
+void plat_ls_security_setup(void)
+{
+	tzc380_setup();
+}
diff --git a/plat/layerscape/board/ls1043/ls1043_stack_protector.c b/plat/layerscape/board/ls1043/ls1043_stack_protector.c
new file mode 100644
index 0000000..50f463b
--- /dev/null
+++ b/plat/layerscape/board/ls1043/ls1043_stack_protector.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <stdint.h>
+
+#define RANDOM_CANARY_VALUE ((u_register_t) 3288484550995823360ULL)
+
+u_register_t plat_get_stack_protector_canary(void)
+{
+	/*
+	 * Ideally, a random number should be returned instead of the
+	 * combination of a timer's value and a compile-time constant. As the
+	 * FVP does not have any random number generator, this is better than
+	 * nothing but not necessarily really secure.
+	 */
+	return RANDOM_CANARY_VALUE ^ read_cntpct_el0();
+}
diff --git a/plat/layerscape/board/ls1043/ls1043_topology.c b/plat/layerscape/board/ls1043/ls1043_topology.c
new file mode 100644
index 0000000..12d2830
--- /dev/null
+++ b/plat/layerscape/board/ls1043/ls1043_topology.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <cassert.h>
+#include "plat_ls.h"
+#include "platform_def.h"
+
+unsigned char ls1043_power_domain_tree_desc[LS1043_CLUSTER_COUNT + 1];
+
+
+CASSERT(LS1043_CLUSTER_COUNT && LS1043_CLUSTER_COUNT <= 256,
+		assert_invalid_ls1043_cluster_count);
+
+/*******************************************************************************
+ * This function dynamically constructs the topology according to
+ * LS1043_CLUSTER_COUNT and returns it.
+ ******************************************************************************/
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+	int i;
+
+	ls1043_power_domain_tree_desc[0] = LS1043_CLUSTER_COUNT;
+
+	for (i = 0; i < LS1043_CLUSTER_COUNT; i++)
+		ls1043_power_domain_tree_desc[i + 1] =
+						LS1043_MAX_CPUS_PER_CLUSTER;
+
+	return ls1043_power_domain_tree_desc;
+}
+
+/*******************************************************************************
+ * This function returns the core count within the cluster corresponding to
+ * `mpidr`.
+ ******************************************************************************/
+unsigned int plat_ls_get_cluster_core_count(u_register_t mpidr)
+{
+	return LS1043_MAX_CPUS_PER_CLUSTER;
+}
+
+/*******************************************************************************
+ * This function implements a part of the critical interface between the psci
+ * generic layer and the platform that allows the former to query the platform
+ * to convert an MPIDR to a unique linear index. An error code (-1) is returned
+ * in case the MPIDR is invalid.
+ ******************************************************************************/
+int plat_core_pos_by_mpidr(u_register_t mpidr)
+{
+	if (ls_check_mpidr(mpidr) == -1)
+		return -1;
+
+	return plat_ls_calc_core_pos(mpidr);
+}
diff --git a/plat/layerscape/board/ls1043/ls_gic.c b/plat/layerscape/board/ls1043/ls_gic.c
new file mode 100644
index 0000000..3986153
--- /dev/null
+++ b/plat/layerscape/board/ls1043/ls_gic.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <mmio.h>
+#include <debug.h>
+#include <endian.h>
+#include "platform_def.h"
+#include "soc.h"
+
+/*
+ * Get GIC offset
+ * For LS1043a rev1.0, GIC base address align with 4k.
+ * For LS1043a rev1.1, if DCFG_GIC400_ALIGN[GIC_ADDR_BIT]
+ * is set, GIC base address align with 4K, or else align
+ * with 64k.
+ */
+void get_gic_offset(uint32_t *gicc_base, uint32_t *gicd_base)
+{
+
+	uint32_t *ccsr_svr = (uint32_t *)DCFG_CCSR_SVR;
+	uint32_t *gic_align = (uint32_t *)SCFG_GIC400_ALIGN;
+	uint32_t val;
+	uint32_t soc_dev_id;
+
+	val = be32toh(mmio_read_32((uintptr_t)ccsr_svr));
+	soc_dev_id = val & (SVR_WO_E << 8);
+
+	if ((soc_dev_id == (SVR_LS1043A << 8) ||
+			soc_dev_id == (SVR_LS1043AE << 8)) &&
+			((val & 0xff) == REV1_1)) {
+		val = be32toh(mmio_read_32((uintptr_t)gic_align));
+		if (val & (1 << GIC_ADDR_BIT)) {
+			*gicc_base = GICC_BASE;
+			*gicd_base = GICD_BASE;
+		} else {
+			*gicc_base = GICC_BASE_64K;
+			*gicd_base = GICD_BASE_64K;
+		}
+	} else {
+		*gicc_base = GICC_BASE;
+		*gicd_base = GICD_BASE;
+	}
+}
diff --git a/plat/layerscape/board/ls1043/platform.mk b/plat/layerscape/board/ls1043/platform.mk
new file mode 100644
index 0000000..163d25e
--- /dev/null
+++ b/plat/layerscape/board/ls1043/platform.mk
@@ -0,0 +1,80 @@
+#
+# Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# indicate the reset vector address can be programmed
+PROGRAMMABLE_RESET_ADDRESS	:=	1
+USE_COHERENT_MEM		:=	0
+RESET_TO_BL31			:=	0
+ENABLE_STACK_PROTECTOR		:=	0
+LS1043_GIC_SOURCES		:=	drivers/arm/gic/common/gic_common.c	\
+					drivers/arm/gic/v2/gicv2_main.c		\
+					drivers/arm/gic/v2/gicv2_helpers.c	\
+					plat/common/plat_gicv2.c		\
+					plat/layerscape/board/ls1043/ls_gic.c
+
+
+LS1043_INTERCONNECT_SOURCES	:= 	drivers/arm/cci/cci.c
+
+LS1043_SECURITY_SOURCES 	:=	plat/layerscape/common/ls_tzc380.c	\
+					plat/layerscape/board/ls1043/ls1043_security.c
+
+PLAT_INCLUDES			:=	-Iplat/layerscape/board/ls1043/include   \
+					-Iinclude/plat/arm/common	\
+					-Iplat/layerscape/common/include	\
+					-Iinclude/drivers/arm   \
+					-Iinclude/lib		\
+					-Iinclude/drivers/io
+
+
+PLAT_BL_COMMON_SOURCES		:=	drivers/console/aarch64/console.S	\
+					plat/layerscape/common/aarch64/ls_console.S
+
+LS1043_CPU_LIBS			:=	lib/cpus/${ARCH}/aem_generic.S
+
+LS1043_CPU_LIBS			+=	lib/cpus/aarch64/cortex_a53.S
+
+BL1_SOURCES			+= 	plat/layerscape/board/ls1043/ls1043_bl1_setup.c		\
+					plat/layerscape/board/ls1043/ls1043_err.c			\
+					drivers/delay_timer/delay_timer.c \
+
+BL1_SOURCES     		+=	plat/layerscape/board/ls1043/${ARCH}/ls1043_helpers.S \
+					${LS1043_CPU_LIBS}					\
+					${LS1043_INTERCONNECT_SOURCES}		\
+					$(LS1043_SECURITY_SOURCES)
+
+
+BL2_SOURCES			+=	drivers/delay_timer/delay_timer.c		\
+					plat/layerscape/board/ls1043/ls1043_bl2_setup.c		\
+					plat/layerscape/board/ls1043/ls1043_err.c			\
+					${LS1043_SECURITY_SOURCES}
+
+
+BL31_SOURCES			+=	plat/layerscape/board/ls1043/ls1043_bl31_setup.c		\
+					plat/layerscape/board/ls1043/ls1043_topology.c		\
+					plat/layerscape/board/ls1043/aarch64/ls1043_helpers.S	\
+					plat/layerscape/board/ls1043/ls1043_psci.c		\
+					drivers/delay_timer/delay_timer.c		\
+					${LS1043_CPU_LIBS}					\
+					${LS1043_GIC_SOURCES}				\
+					${LS1043_INTERCONNECT_SOURCES}			\
+					${LS1043_SECURITY_SOURCES}
+
+# Disable the PSCI platform compatibility layer
+ENABLE_PLAT_COMPAT		:= 	0
+MULTI_CONSOLE_API		:=	1
+
+# Enable workarounds for selected Cortex-A53 erratas.
+ERRATA_A53_855873		:=	1
+
+ifneq (${ENABLE_STACK_PROTECTOR},0)
+PLAT_BL_COMMON_SOURCES		+=	plat/layerscape/board/ls1043/ls1043_stack_protector.c
+endif
+
+ifeq (${ARCH},aarch32)
+    NEED_BL32 := yes
+endif
+
+include plat/layerscape/common/ls_common.mk
diff --git a/plat/layerscape/board/ls1043/tsp/ls1043_tsp_setup.c b/plat/layerscape/board/ls1043/tsp/ls1043_tsp_setup.c
new file mode 100644
index 0000000..4fc019c
--- /dev/null
+++ b/plat/layerscape/board/ls1043/tsp/ls1043_tsp_setup.c
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "plat_ls.h"
+
+void tsp_early_platform_setup(void)
+{
+	ls_tsp_early_platform_setup();
+
+	/*Todo: Initialize the platform config for future decision making */
+}
diff --git a/plat/layerscape/board/ls1043/tsp/tsp-ls1043.mk b/plat/layerscape/board/ls1043/tsp/tsp-ls1043.mk
new file mode 100644
index 0000000..3941427
--- /dev/null
+++ b/plat/layerscape/board/ls1043/tsp/tsp-ls1043.mk
@@ -0,0 +1,12 @@
+#
+# Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# TSP source files specific to FVP platform
+BL32_SOURCES		+=	plat/layerscape/board/ls1043/ls1043_topology.c		\
+				plat/layerscape/board/ls1043/tsp/ls1043_tsp_setup.c		\
+				${LS1043_GIC_SOURCES}
+
+include plat/layerscape/common/tsp/ls_tsp.mk
diff --git a/plat/layerscape/common/aarch64/ls_bl2_mem_params_desc.c b/plat/layerscape/common/aarch64/ls_bl2_mem_params_desc.c
new file mode 100644
index 0000000..a96e390
--- /dev/null
+++ b/plat/layerscape/common/aarch64/ls_bl2_mem_params_desc.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <bl_common.h>
+#include <desc_image_load.h>
+#include <platform.h>
+#include <platform_def.h>
+#include <debug.h>
+#include <ls_def.h>
+
+/*******************************************************************************
+ * Following descriptor provides BL image/ep information that gets used
+ * by BL2 to load the images and also subset of this information is
+ * passed to next BL image. The image loading sequence is managed by
+ * populating the images in required loading order. The image execution
+ * sequence is managed by populating the `next_handoff_image_id` with
+ * the next executable image id.
+ ******************************************************************************/
+static bl_mem_params_node_t bl2_mem_params_descs[] = {
+#ifdef EL3_PAYLOAD_BASE
+	/* Fill EL3 payload related information (BL31 is EL3 payload)*/
+	{
+		.image_id = BL31_IMAGE_ID,
+
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+				VERSION_2, entry_point_info_t,
+				SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = EL3_PAYLOAD_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+				DISABLE_ALL_EXCEPTIONS),
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+				VERSION_2, image_info_t,
+				IMAGE_ATTRIB_PLAT_SETUP |
+				IMAGE_ATTRIB_SKIP_LOADING),
+
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
+
+#else /* EL3_PAYLOAD_BASE */
+
+	/* Fill BL31 related information */
+	{
+		.image_id = BL31_IMAGE_ID,
+
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+				VERSION_2, entry_point_info_t,
+				SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = BL31_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+				DISABLE_ALL_EXCEPTIONS),
+#if DEBUG
+		.ep_info.args.arg1 = LS_BL31_PLAT_PARAM_VAL,
+#endif
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+		.image_info.image_base = BL31_BASE,
+		.image_info.image_max_size = (BL31_LIMIT - BL31_BASE),
+
+# ifdef BL32_BASE
+		.next_handoff_image_id = BL32_IMAGE_ID,
+# else
+		.next_handoff_image_id = BL33_IMAGE_ID,
+# endif
+	},
+# ifdef BL32_BASE
+	/* Fill BL32 related information */
+	{
+		.image_id = BL32_IMAGE_ID,
+
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+		.ep_info.pc = BL32_BASE,
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+				VERSION_2, image_info_t, 0),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = (BL32_LIMIT - BL32_BASE),
+
+		.next_handoff_image_id = BL33_IMAGE_ID,
+	},
+# endif /* BL32_BASE */
+
+	/* Fill BL33 related information */
+	{
+		.image_id = BL33_IMAGE_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+# ifdef PRELOADED_BL33_BASE
+		.ep_info.pc = PRELOADED_BL33_BASE,
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+				VERSION_2, image_info_t,
+				IMAGE_ATTRIB_SKIP_LOADING),
+# else
+		.ep_info.pc = BL33_BASE,
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+				VERSION_2, image_info_t, 0),
+		.image_info.image_base = BL33_BASE,
+		.image_info.image_max_size = LS_NS_DRAM_SIZE,
+# endif /* PRELOADED_BL33_BASE */
+
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	}
+#endif /* EL3_PAYLOAD_BASE */
+};
+
+REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs)
diff --git a/plat/layerscape/common/aarch64/ls_console.S b/plat/layerscape/common/aarch64/ls_console.S
new file mode 100644
index 0000000..5c87465
--- /dev/null
+++ b/plat/layerscape/common/aarch64/ls_console.S
@@ -0,0 +1,268 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <console_macros.S>
+#include <assert_macros.S>
+#include "ls_16550.h"
+
+	/*
+	 * "core" functions are low-level implementations that don't require
+	 * writable memory and are thus safe to call in BL1 crash context.
+	 */
+	.globl console_ls_16550_core_init
+	.globl console_ls_16550_core_putc
+	.globl console_ls_16550_core_getc
+
+	.globl console_ls_16550_putc
+	.globl console_ls_16550_getc
+	.globl console_ls_16550_flush
+
+	/* -----------------------------------------------
+	 * int console_ls_16550_core_init(uintptr_t base_addr,
+	 * unsigned int uart_clk, unsigned int baud_rate)
+	 * Function to initialize the console without a
+	 * C Runtime to print debug information. This
+	 * function will be accessed by console_init and
+	 * crash reporting.
+	 * In: x0 - console base address
+	 *     w1 - Uart clock in Hz
+	 *     w2 - Baud rate
+	 * Out: return 1 on success, 0 on error
+	 * Clobber list : x1, x2, x3
+	 * -----------------------------------------------
+	 */
+func console_ls_16550_core_init
+	/* Check the input base address */
+	cbz	x0, init_fail
+	/* Check baud rate and uart clock for sanity */
+	cbz	w1, init_fail
+	cbz	w2, init_fail
+
+	/* Program the baudrate */
+	/* Divisor =  Uart clock / (16 * baudrate) */
+	lsl	w2, w2, #4
+	udiv	w2, w1, w2
+	and	w1, w2, #0xff		/* w1 = DLL */
+	lsr	w2, w2, #8
+	and	w2, w2, #0xff		/* w2 = DLLM */
+	ldrb	w3, [x0, #UARTLCR]
+	orr	w3, w3, #UARTLCR_DLAB
+	strb	w3, [x0, #UARTLCR]	/* enable DLL, DLLM programming */
+	strb	w1, [x0, #UARTDLL]	/* program DLL */
+	strb	w2, [x0, #UARTDLLM]	/* program DLLM */
+	mov	w2, #~UARTLCR_DLAB
+	and	w3, w3, w2
+	strb	w3, [x0, #UARTLCR]	/* disable DLL, DLLM programming */
+
+	/* 8n1 */
+	mov	w3, #3
+	strb	w3, [x0, #UARTLCR]
+	/* no interrupt */
+	mov	w3, #0
+	strb	w3, [x0, #UARTIER]
+	/* enable fifo, DMA */
+	mov	w3, #(UARTFCR_FIFOEN |UARTFCR_TXCLR | UARTFCR_RXCLR)
+	strb	w3, [x0, #UARTFCR]
+	/* DTR + RTS */
+	mov	w3, #3
+	str	w3, [x0, #UARTMCR]
+	mov	w0, #1
+	ret
+init_fail:
+	mov	w0, #0
+	ret
+endfunc console_ls_16550_core_init
+
+#if MULTI_CONSOLE_API
+	.globl console_ls_16550_register
+
+	/* -----------------------------------------------
+	 * int console_ls_16550_register(console_ls_16550_t *console,
+	 *	uintptr_t base, uint32_t clk, uint32_t baud)
+	 * Function to initialize and register a new 16550
+	 * console. Storage passed in for the console struct
+	 * *must* be persistent (i.e. not from the stack).
+	 * In: x0 - UART register base address
+	 *     w1 - UART clock in Hz
+	 *     w2 - Baud rate
+	 *     x3 - pointer to empty console_ls_16550_t struct
+	 * Out: return 1 on success, 0 on error
+	 * Clobber list : x0, x1, x2, x6, x7, x14
+	 * -----------------------------------------------
+	 */
+func console_ls_16550_register
+	mov	x7, x30
+	mov	x6, x3
+	cbz	x6, register_fail
+	str	x0, [x6, #CONSOLE_T_16550_BASE]
+
+	bl	console_ls_16550_core_init
+	cbz	x0, register_fail
+
+	mov	x0, x6
+	mov	x30, x7
+	finish_console_register ls_16550
+
+register_fail:
+	ret	x7
+endfunc console_ls_16550_register
+#else
+	.globl console_core_init
+	.globl console_core_putc
+	.globl console_core_getc
+	.globl console_core_flush
+	.equ console_core_init,console_ls_16550_core_init
+	.equ console_core_putc,console_ls_16550_core_putc
+	.equ console_core_getc,console_ls_16550_core_getc
+	.equ console_core_flush,console_ls_16550_core_flush
+#endif
+
+	/* --------------------------------------------------------
+	 * int console_ls_16550_core_putc(int c, uintptr_t base_addr)
+	 * Function to output a character over the console. It
+	 * returns the character printed on success or -1 on error.
+	 * In : w0 - character to be printed
+	 *      x1 - console base address
+	 * Out : return -1 on error else return character.
+	 * Clobber list : x2
+	 * --------------------------------------------------------
+	 */
+func console_ls_16550_core_putc
+#if ENABLE_ASSERTIONS
+	cmp	x1, #0
+	ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+
+	/* Prepend '\r' to '\n' */
+	cmp	w0, #0xA //'\n'
+	b.ne	2f
+	/* Check if the transmit FIFO is full */
+1:	ldrb	w2, [x1, #UARTLSR]
+	and	w2, w2, #UARTLSR_THRE        /* #(UARTLSR_TEMT | UARTLSR_THRE)*/
+	cmp	w2, #(UARTLSR_THRE)
+	b.ne	1b
+	mov	w2, #0xD		/* '\r' */
+	strb	w2, [x1, #UARTTX]
+	ldrb	w2, [x1, #UARTFCR]
+	orr	w2, w2, #UARTFCR_TXCLR
+
+	/* Check if the transmit FIFO is full */
+2:	ldrb	w2, [x1, #UARTLSR]
+	and	w2, w2, #(UARTLSR_THRE)
+	cmp	w2, #(UARTLSR_THRE)
+	b.ne	2b
+	strb	w0, [x1, #UARTTX]
+	ret
+endfunc console_ls_16550_core_putc
+
+	/* --------------------------------------------------------
+	 * int console_16550_putc(int c, console_ls_16550_t *console)
+	 * Function to output a character over the console. It
+	 * returns the character printed on success or -1 on error.
+	 * In : w0 - character to be printed
+	 *      x1 - pointer to console_t structure
+	 * Out : return -1 on error else return character.
+	 * Clobber list : x2
+	 * --------------------------------------------------------
+	 */
+func console_ls_16550_putc
+#if ENABLE_ASSERTIONS
+	cmp	x1, #0
+	ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+	ldr	x1, [x1, #CONSOLE_T_16550_BASE]
+	b	console_ls_16550_core_putc
+endfunc console_ls_16550_putc
+
+	/* ---------------------------------------------
+	 * int console_ls_16550_core_getc(uintptr_t base_addr)
+	 * Function to get a character from the console.
+	 * It returns the character grabbed on success
+	 * or -1 on if no character is available.
+	 * In :  x0 - console base address
+	 * Out : w0 - character if available, else -1
+	 * Clobber list : x0, x1
+	 * ---------------------------------------------
+	 */
+func console_ls_16550_core_getc
+#if ENABLE_ASSERTIONS
+	cmp	x0, #0
+	ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+
+	/* Check if the receive FIFO is empty */
+1:	ldrb	w1, [x0, #UARTLSR]
+	tbz	w1, #UARTLSR_RDR, 1b
+	ldrb	w0, [x0, #UARTRX]
+	ret
+no_char:
+	mov	w0, #ERROR_NO_PENDING_CHAR
+	ret
+endfunc console_ls_16550_core_getc
+
+	/* ---------------------------------------------
+	 * int console_ls_16550_getc(console_ls_16550_t *console)
+	 * Function to get a character from the console.
+	 * It returns the character grabbed on success
+	 * or -1 on if no character is available.
+	 * In :  x0 - pointer to console_t structure
+	 * Out : w0 - character if available, else -1
+	 * Clobber list : x0, x1
+	 * ---------------------------------------------
+	 */
+func console_ls_16550_getc
+#if ENABLE_ASSERTIONS
+	cmp	x1, #0
+	ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+	ldr	x0, [x0, #CONSOLE_T_16550_BASE]
+	b	console_ls_16550_core_getc
+endfunc console_ls_16550_getc
+
+	/* ---------------------------------------------
+	 * int console_ls_16550_core_flush(uintptr_t base_addr)
+	 * Function to force a write of all buffered
+	 * data that hasn't been output.
+	 * In : x0 - console base address
+	 * Out : return -1 on error else return 0.
+	 * Clobber list : x0, x1
+	 * ---------------------------------------------
+	 */
+func console_ls_16550_core_flush
+#if ENABLE_ASSERTIONS
+	cmp	x0, #0
+	ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+
+	/* Loop until the transmit FIFO is empty */
+1:	ldrb	w1, [x0, #UARTLSR]
+	and	w1, w1, #(UARTLSR_TEMT | UARTLSR_THRE)
+	cmp	w1, #(UARTLSR_TEMT | UARTLSR_THRE)
+	b.ne	1b
+
+	mov	w0, #0
+	ret
+endfunc console_ls_16550_core_flush
+
+	/* ---------------------------------------------
+	 * int console_ls_16550_flush(console_ls_16550_t *console)
+	 * Function to force a write of all buffered
+	 * data that hasn't been output.
+	 * In : x0 - pointer to console_t structure
+	 * Out : return -1 on error else return 0.
+	 * Clobber list : x0, x1
+	 * ---------------------------------------------
+	 */
+func console_ls_16550_flush
+#if ENABLE_ASSERTIONS
+	cmp	x0, #0
+	ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+	ldr	x0, [x0, #CONSOLE_T_16550_BASE]
+	b	console_ls_16550_core_flush
+endfunc console_ls_16550_flush
diff --git a/plat/layerscape/common/aarch64/ls_helpers.S b/plat/layerscape/common/aarch64/ls_helpers.S
new file mode 100644
index 0000000..7d71f48
--- /dev/null
+++ b/plat/layerscape/common/aarch64/ls_helpers.S
@@ -0,0 +1,150 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <asm_macros.S>
+#include <console.h>
+#include <platform_def.h>
+
+	.weak	plat_my_core_pos
+	.globl	plat_crash_console_init
+	.globl	plat_crash_console_putc
+	.globl	plat_crash_console_flush
+	.weak	platform_mem_init
+	.globl	plat_ls_calc_core_pos
+
+
+	/* -----------------------------------------------------
+	 *  unsigned int plat_my_core_pos(void)
+	 *  This function uses the plat_ls_calc_core_pos()
+	 *  definition to get the index of the calling CPU.
+	 * -----------------------------------------------------
+	 */
+func plat_my_core_pos
+	mrs	x0, mpidr_el1
+	b	plat_ls_calc_core_pos
+endfunc plat_my_core_pos
+
+	/* -----------------------------------------------------
+	 *  unsigned int plat_ls_calc_core_pos(u_register_t mpidr)
+	 *  Helper function to calculate the core position.
+	 *  With this function: CorePos = (ClusterId * 4) +
+	 *  				  CoreId
+	 * -----------------------------------------------------
+	 */
+func plat_ls_calc_core_pos
+	and	x1, x0, #MPIDR_CPU_MASK
+	and	x0, x0, #MPIDR_CLUSTER_MASK
+	add	x0, x1, x0, LSR #6
+	ret
+endfunc plat_ls_calc_core_pos
+
+	/* ---------------------------------------------
+	 * int plat_crash_console_init(void)
+	 * Function to initialize the crash console
+	 * without a C Runtime to print crash report.
+	 * Clobber list : x0 - x4
+	 * ---------------------------------------------
+	 */
+
+#if MULTI_CONSOLE_API
+	/* -----------------------------------------------------
+	 * int plat_crash_console_init(void)
+	 * Use normal console by default. Switch it to crash
+	 * mode so serial consoles become active again.
+	 * NOTE: This default implementation will only work for
+	 * crashes that occur after a normal console (marked
+	 * valid for the crash state) has been registered with
+	 * the console framework. To debug crashes that occur
+	 * earlier, the platform has to override these functions
+	 * with an implementation that initializes a console
+	 * driver with hardcoded parameters. See
+	 * docs/porting-guide.rst for more information.
+	 * -----------------------------------------------------
+	 */
+func plat_crash_console_init
+#if defined(IMAGE_BL1)
+	/*
+	 * BL1 code can possibly crash so early that the data segment is not yet
+	 * accessible. Don't risk undefined behavior by trying to run the normal
+	 * console framework. Platforms that want to debug BL1 will need to
+	 * override this with custom functions that can run from registers only.
+	 */
+	mov	x0, #0
+	ret
+#else	/* IMAGE_BL1 */
+	mov	x3, x30
+	mov	x0, #CONSOLE_FLAG_CRASH
+	bl	console_switch_state
+	mov	x0, #1
+	ret	x3
+#endif
+endfunc plat_crash_console_init
+
+	/* -----------------------------------------------------
+	 * void plat_crash_console_putc(int character)
+	 * Output through the normal console by default.
+	 * -----------------------------------------------------
+	 */
+func plat_crash_console_putc
+	b	console_putc
+endfunc plat_crash_console_putc
+
+	/* -----------------------------------------------------
+	 * void plat_crash_console_flush(void)
+	 * Flush normal console by default.
+	 * -----------------------------------------------------
+	 */
+func plat_crash_console_flush
+	b	console_flush
+endfunc plat_crash_console_flush
+
+#else	/* MULTI_CONSOLE_API */
+
+	/* -----------------------------------------------------
+	 * In the old API these are all no-op stubs that need to
+	 * be overridden by the platform to be useful.
+	 * -----------------------------------------------------
+	 */
+func plat_crash_console_init
+	mov_imm	x0, PLAT_LS1043_UART_BASE
+	mov_imm	x1, PLAT_LS1043_UART_CLOCK
+	mov_imm	x2, PLAT_LS1043_UART_BAUDRATE
+	b	console_core_init
+endfunc plat_crash_console_init
+
+	/* ---------------------------------------------
+	 * int plat_crash_console_putc(int c)
+	 * Function to print a character on the crash
+	 * console without a C Runtime.
+	 * Clobber list : x1, x2
+	 * ---------------------------------------------
+	 */
+func plat_crash_console_putc
+	mov_imm	x1, PLAT_LS1043_UART_BASE
+	b	console_core_putc
+endfunc plat_crash_console_putc
+
+	/* ---------------------------------------------
+	 * int plat_crash_console_flush()
+	 * Function to force a write of all buffered
+	 * data that hasn't been output.
+	 * Out : return -1 on error else return 0.
+	 * Clobber list : r0 - r1
+	 * ---------------------------------------------
+	 */
+func plat_crash_console_flush
+	mov_imm	x1, PLAT_LS1043_UART_BASE
+	b	console_core_flush
+endfunc plat_crash_console_flush
+#endif
+	/* ---------------------------------------------------------------------
+	 * We don't need to carry out any memory initialization on LS
+	 * platforms. The Secure SRAM is accessible straight away.
+	 * ---------------------------------------------------------------------
+	 */
+func platform_mem_init
+	ret
+endfunc platform_mem_init
diff --git a/plat/layerscape/common/include/fsl_csu.h b/plat/layerscape/common/include/fsl_csu.h
new file mode 100644
index 0000000..680911e
--- /dev/null
+++ b/plat/layerscape/common/include/fsl_csu.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __FSL_CSU_H__
+#define __FSL_CSU_H__
+
+enum csu_cslx_access {
+	CSU_NS_SUP_R = 0x08,
+	CSU_NS_SUP_W = 0x80,
+	CSU_NS_SUP_RW = 0x88,
+	CSU_NS_USER_R = 0x04,
+	CSU_NS_USER_W = 0x40,
+	CSU_NS_USER_RW = 0x44,
+	CSU_S_SUP_R = 0x02,
+	CSU_S_SUP_W = 0x20,
+	CSU_S_SUP_RW = 0x22,
+	CSU_S_USER_R = 0x01,
+	CSU_S_USER_W = 0x10,
+	CSU_S_USER_RW = 0x11,
+	CSU_ALL_RW = 0xff,
+};
+
+struct csu_ns_dev {
+	uintptr_t ind;
+	uint32_t val;
+};
+
+void enable_layerscape_ns_access(void);
+
+#endif
diff --git a/plat/layerscape/common/include/ls_16550.h b/plat/layerscape/common/include/ls_16550.h
new file mode 100644
index 0000000..503a01d
--- /dev/null
+++ b/plat/layerscape/common/include/ls_16550.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __LS_16550_H__
+#define __LS_16550_H__
+
+#include <console.h>
+
+/* UART16550 Registers */
+#define UARTTX			0x0
+#define UARTRX			0x0
+#define UARTDLL			0x0
+#define UARTIER			0x1
+#define UARTDLLM		0x1
+#define UARTFCR			0x2
+#define UARTLCR			0x3
+#define UARTLSR			0x5
+#define UARTMCR                 0x4
+
+/* FIFO Control Register bits */
+#define UARTFCR_FIFOMD_16450	(0 << 6)
+#define UARTFCR_FIFOMD_16550	(1 << 6)
+#define UARTFCR_RXTRIG_1	(0 << 6)
+#define UARTFCR_RXTRIG_4	(1 << 6)
+#define UARTFCR_RXTRIG_8	(2 << 6)
+#define UARTFCR_RXTRIG_16	(3 << 6)
+#define UARTFCR_TXTRIG_1	(0 << 4)
+#define UARTFCR_TXTRIG_4	(1 << 4)
+#define UARTFCR_TXTRIG_8	(2 << 4)
+#define UARTFCR_TXTRIG_16	(3 << 4)
+#define UARTFCR_DMAEN		(1 << 3)	/* Enable DMA mode */
+#define UARTFCR_TXCLR		(1 << 2)	/* Clear contents of Tx FIFO */
+#define UARTFCR_RXCLR		(1 << 1)	/* Clear contents of Rx FIFO */
+#define UARTFCR_FIFOEN		(1 << 0)	/* Enable the Tx/Rx FIFO */
+#define UARTFCR_64FIFO          (1 << 5)
+
+/* Line Control Register bits */
+#define UARTLCR_DLAB		(1 << 7)	/* Divisor Latch Access */
+#define UARTLCR_SETB		(1 << 6)	/* Set BREAK Condition */
+#define UARTLCR_SETP		(1 << 5)	/* Set Parity to LCR[4] */
+#define UARTLCR_EVEN		(1 << 4)	/* Even Parity Format */
+#define UARTLCR_PAR		(1 << 3)	/* Parity */
+#define UARTLCR_STOP		(1 << 2)	/* Stop Bit */
+#define UARTLCR_WORDSZ_5	0		/* Word Length of 5 */
+#define UARTLCR_WORDSZ_6	1		/* Word Length of 6 */
+#define UARTLCR_WORDSZ_7	2		/* Word Length of 7 */
+#define UARTLCR_WORDSZ_8	3		/* Word Length of 8 */
+
+/* Line Status Register bits */
+#define UARTLSR_RXFIFOEMT	(1 << 9)	/* Rx Fifo Empty */
+#define UARTLSR_TXFIFOFULL	(1 << 8)	/* Tx Fifo Full */
+#define UARTLSR_RXFIFOERR	(1 << 7)	/* Rx Fifo Error */
+#define UARTLSR_TEMT		(1 << 6)	/* Tx Shift Register Empty */
+#define UARTLSR_THRE		(1 << 5)	/* Tx Holding Register Empty */
+#define UARTLSR_BRK		(1 << 4)	/* Break Condition Detected */
+#define UARTLSR_FERR		(1 << 3)	/* Framing Error */
+#define UARTLSR_PERR		(1 << 3)	/* Parity Error */
+#define UARTLSR_OVRF		(1 << 2)	/* Rx Overrun Error */
+#define UARTLSR_RDR		(1 << 2)	/* Rx Data Ready */
+
+#define CONSOLE_T_16550_BASE	CONSOLE_T_DRVDATA
+
+#ifndef __ASSEMBLY__
+
+#include <types.h>
+
+typedef struct {
+	console_t console;
+	uintptr_t base;
+} console_ls_16550_t;
+
+/*
+ * Initialize a new 16550 console instance and register it with the console
+ * framework. The |console| pointer must point to storage that will be valid
+ * for the lifetime of the console, such as a global or static local variable.
+ * Its contents will be reinitialized from scratch.
+ */
+int console_ls_16550_register(uintptr_t baseaddr, uint32_t clock, uint32_t baud,
+			   console_ls_16550_t *console);
+
+#endif /*__ASSEMBLY__*/
+
+#endif	/* __LS_16550_H__ */
diff --git a/plat/layerscape/common/include/plat_ls.h b/plat/layerscape/common/include/plat_ls.h
new file mode 100644
index 0000000..9d5ec14
--- /dev/null
+++ b/plat/layerscape/common/include/plat_ls.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __PLAT_LS_H__
+#define __PLAT_LS_H__
+
+#include <sys/types.h>
+#include <cpu_data.h>
+
+/* BL1 utility functions */
+void ls_bl1_platform_setup(void);
+void ls_bl1_early_platform_setup(void);
+
+/* BL2 utility functions */
+void ls_bl2_early_platform_setup(meminfo_t *mem_layout);
+uint32_t ls_get_spsr_for_bl32_entry(void);
+uint32_t ls_get_spsr_for_bl33_entry(void);
+
+/* BL3 utility functions */
+void ls_bl31_early_platform_setup(void *from_bl2,
+				void *plat_params_from_bl2);
+
+/* IO storage utility functions */
+void plat_ls_io_setup(void);
+
+
+void ls_setup_page_tables(uintptr_t total_base,
+			size_t total_size,
+			uintptr_t code_start,
+			uintptr_t code_limit,
+			uintptr_t rodata_start,
+			uintptr_t rodata_limit
+#if USE_COHERENT_MEM
+			, uintptr_t coh_start,
+			uintptr_t coh_limit
+#endif
+);
+
+/* PSCI utility functions */
+int ls_check_mpidr(u_register_t mpidr);
+
+/* Security utility functions */
+int tzc380_setup(void);
+
+/* Timer utility functions */
+uint64_t ls_get_timer(uint64_t start);
+void ls_delay_timer_init(void);
+
+/* TSP utility functions */
+void ls_tsp_early_platform_setup(void);
+
+/* Helper functions */
+unsigned int plat_ls_calc_core_pos(u_register_t mpidr);
+
+/* others */
+unsigned int plat_ls_get_cluster_core_count(u_register_t mpidr);
+
+#endif /* __PLAT_LS_H__ */
diff --git a/plat/layerscape/common/include/soc.h b/plat/layerscape/common/include/soc.h
new file mode 100644
index 0000000..72c10cf
--- /dev/null
+++ b/plat/layerscape/common/include/soc.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __LAYERSCAPE_SOC_H__
+#define __LAYERSCAPE_SOC_H__
+
+#include <stdint.h>
+
+#define SVR_WO_E		0xFFFFFE
+#define SVR_LS1043A		0x879204
+#define SVR_LS1043AE		0x879200
+
+void get_gic_offset(uint32_t *gicc_base, uint32_t *gicd_base);
+
+#endif /* __LAYERSCAPE_SOC_H__ */
diff --git a/plat/layerscape/common/include/tzc380.h b/plat/layerscape/common/include/tzc380.h
new file mode 100644
index 0000000..788c0ed
--- /dev/null
+++ b/plat/layerscape/common/include/tzc380.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __TZC380_H__
+#define __TZC380_H__
+
+struct tzc380_reg {
+	unsigned int secure;
+	unsigned int enabled;
+	unsigned int low_addr;
+	unsigned int high_addr;
+	unsigned int size;
+	unsigned int sub_mask;
+};
+
+#endif /* __TZC380_H__ */
diff --git a/plat/layerscape/common/ls_bl1_setup.c b/plat/layerscape/common/ls_bl1_setup.c
new file mode 100644
index 0000000..43f7450
--- /dev/null
+++ b/plat/layerscape/common/ls_bl1_setup.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <debug.h>
+#include "ls_16550.h"
+#include "plat_ls.h"
+#include "../../../bl1/bl1_private.h"
+
+/* Data structure which holds the extents of the trusted SRAM for BL1*/
+static meminfo_t bl1_tzram_layout;
+
+meminfo_t *bl1_plat_sec_mem_layout(void)
+{
+	return &bl1_tzram_layout;
+}
+
+/*******************************************************************************
+ * BL1 specific platform actions shared between ARM standard platforms.
+ ******************************************************************************/
+void ls_bl1_early_platform_setup(void)
+{
+	static console_ls_16550_t console;
+
+#if !LS1043_DISABLE_TRUSTED_WDOG
+	/* TODO: Enable watchdog */
+
+#endif
+
+	/* Initialize the console to provide early debug support */
+	console_ls_16550_register(LS_TF_UART_BASE, LS_TF_UART_CLOCK,
+			       LS_TF_UART_BAUDRATE, &console);
+
+	/* Allow BL1 to see the whole Trusted RAM */
+	bl1_tzram_layout.total_base = LS_SRAM_BASE;
+	bl1_tzram_layout.total_size = LS_SRAM_SIZE;
+}
+
+/******************************************************************************
+ * Perform the very early platform specific architecture setup shared between
+ * ARM standard platforms. This only does basic initialization. Later
+ * architectural setup (bl1_arch_setup()) does not do anything platform
+ * specific.
+ *****************************************************************************/
+void ls_bl1_plat_arch_setup(void)
+{
+	ls_setup_page_tables(bl1_tzram_layout.total_base,
+			      bl1_tzram_layout.total_size,
+			      BL_CODE_BASE,
+			      BL1_CODE_END,
+			      BL1_RO_DATA_BASE,
+			      BL1_RO_DATA_END
+#if USE_COHERENT_MEM
+			      , BL_COHERENT_RAM_BASE,
+			      BL_COHERENT_RAM_END
+#endif
+			     );
+	VERBOSE("After setup the page tables\n");
+#ifdef AARCH32
+	enable_mmu_secure(0);
+#else
+	enable_mmu_el3(0);
+#endif /* AARCH32 */
+	VERBOSE("After MMU enabled\n");
+}
+
+void bl1_plat_arch_setup(void)
+{
+	ls_bl1_plat_arch_setup();
+}
+
+/*
+ * Perform the platform specific architecture setup shared between
+ * ARM standard platforms.
+ */
+void ls_bl1_platform_setup(void)
+{
+	/* Initialise the IO layer and register platform IO devices */
+	plat_ls_io_setup();
+}
+
+void bl1_plat_prepare_exit(entry_point_info_t *ep_info)
+{
+#if !LS1043_DISABLE_TRUSTED_WDOG
+	/*TODO: Disable watchdog before leaving BL1 */
+#endif
+}
diff --git a/plat/layerscape/common/ls_bl2_setup.c b/plat/layerscape/common/ls_bl2_setup.c
new file mode 100644
index 0000000..6e6ad6e
--- /dev/null
+++ b/plat/layerscape/common/ls_bl2_setup.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <bl_common.h>
+#include <desc_image_load.h>
+#include "ls_16550.h"
+#include "plat_ls.h"
+#include "ls_def.h"
+
+/* Data structure which holds the extents of the trusted SRAM for BL2 */
+static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
+
+/*******************************************************************************
+ * BL1 has passed the extents of the trusted SRAM that should be visible to BL2
+ * in x0. This memory layout is sitting at the base of the free trusted SRAM.
+ * Copy it to a safe location before its reclaimed by later BL2 functionality.
+ ******************************************************************************/
+void ls_bl2_early_platform_setup(meminfo_t *mem_layout)
+{
+	static console_ls_16550_t console;
+
+	/* Initialize the console to provide early debug support */
+	console_ls_16550_register(LS_TF_UART_BASE, LS_TF_UART_CLOCK,
+			       LS_TF_UART_BAUDRATE, &console);
+
+	/* Setup the BL2 memory layout */
+	bl2_tzram_layout = *mem_layout;
+
+	/* Initialise the IO layer and register platform IO devices */
+	plat_ls_io_setup();
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup here. At the
+ * moment this is only initializes the mmu in a quick and dirty way.
+ ******************************************************************************/
+void ls_bl2_plat_arch_setup(void)
+{
+	ls_setup_page_tables(bl2_tzram_layout.total_base,
+			      bl2_tzram_layout.total_size,
+			      BL_CODE_BASE,
+			      BL_CODE_END,
+			      BL_RO_DATA_BASE,
+			      BL_RO_DATA_END
+#if USE_COHERENT_MEM
+			      , BL_COHERENT_RAM_BASE,
+			      BL_COHERENT_RAM_END
+#endif
+			      );
+
+#ifdef AARCH32
+	enable_mmu_secure(0);
+#else
+	enable_mmu_el1(0);
+#endif
+}
+
+void bl2_plat_arch_setup(void)
+{
+	ls_bl2_plat_arch_setup();
+}
+
+int ls_bl2_handle_post_image_load(unsigned int image_id)
+{
+	int err = 0;
+	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+
+	assert(bl_mem_params);
+
+	switch (image_id) {
+#ifdef AARCH64
+	case BL32_IMAGE_ID:
+		bl_mem_params->ep_info.spsr = ls_get_spsr_for_bl32_entry();
+		break;
+#endif
+
+	case BL33_IMAGE_ID:
+		/* BL33 expects to receive the primary CPU MPID (through r0) */
+		bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
+		bl_mem_params->ep_info.spsr = ls_get_spsr_for_bl33_entry();
+		break;
+	}
+
+	return err;
+}
+
+/*******************************************************************************
+ * This function can be used by the platforms to update/use image
+ * information for given `image_id`.
+ ******************************************************************************/
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	return ls_bl2_handle_post_image_load(image_id);
+}
diff --git a/plat/layerscape/common/ls_bl31_setup.c b/plat/layerscape/common/ls_bl31_setup.c
new file mode 100644
index 0000000..3016f58
--- /dev/null
+++ b/plat/layerscape/common/ls_bl31_setup.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <console.h>
+#include <mmio.h>
+#include <gicv2.h>
+#include "ls_16550.h"
+#include "plat_ls.h"
+#include "soc.h"
+
+#define BL31_END (uintptr_t)(&__BL31_END__)
+
+/*
+ * Placeholder variables for copying the arguments that have been passed to
+ * BL31 from BL2.
+ */
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+const unsigned int g0_interrupt_array1[] = {
+	9
+};
+
+gicv2_driver_data_t ls_gic_data = {
+	.gicd_base = GICD_BASE,
+	.gicc_base = GICC_BASE,
+	.g0_interrupt_num = ARRAY_SIZE(g0_interrupt_array1),
+	.g0_interrupt_array = g0_interrupt_array1,
+};
+
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for the
+ * security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+	entry_point_info_t *next_image_info;
+
+	assert(sec_state_is_valid(type));
+	next_image_info = (type == NON_SECURE)
+			? &bl33_image_ep_info : &bl32_image_ep_info;
+
+	if (next_image_info->pc)
+		return next_image_info;
+	else
+		return NULL;
+}
+
+/*******************************************************************************
+ * Perform any BL31 early platform setup common to Layerscape platforms.
+ * Here is an opportunity to copy parameters passed by the calling EL (S-EL1
+ * in BL2 & S-EL3 in BL1) before they are lost (potentially). This needs to be
+ * done before the MMU is initialized so that the memory layout can be used
+ * while creating page tables. BL2 has flushed this information to memory, so
+ * we are guaranteed to pick up good data.
+ ******************************************************************************/
+void ls_bl31_early_platform_setup(void *from_bl2,
+				void *plat_params_from_bl2)
+{
+	static console_ls_16550_t console;
+
+	/* Initialize the console to provide early debug support */
+	console_ls_16550_register(LS_TF_UART_BASE, LS_TF_UART_CLOCK,
+				LS_TF_UART_BAUDRATE, &console);
+#if RESET_TO_BL31
+	/* There are no parameters from BL2 if BL31 is a reset vector */
+	assert(from_bl2 == NULL);
+	assert(plat_params_from_bl2 == NULL);
+
+#ifdef BL32_BASE
+	/* Populate entry point information for BL32 */
+	SET_PARAM_HEAD(&bl32_image_ep_info,
+				PARAM_EP,
+				VERSION_1,
+				0);
+	SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
+	bl32_image_ep_info.pc = BL32_BASE;
+	bl32_image_ep_info.spsr = ls_get_spsr_for_bl32_entry();
+#endif /* BL32_BASE */
+
+	/* Populate entry point information for BL33 */
+	SET_PARAM_HEAD(&bl33_image_ep_info,
+				PARAM_EP,
+				VERSION_1,
+				0);
+	/*
+	 * Tell BL31 where the non-trusted software image
+	 * is located and the entry state information
+	 */
+	bl33_image_ep_info.pc = plat_get_ns_image_entrypoint();
+
+	bl33_image_ep_info.spsr = ls_get_spsr_for_bl33_entry();
+	SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
+
+#else /* RESET_TO_BL31 */
+
+	/*
+	 * In debug builds, we pass a special value in 'plat_params_from_bl2'
+	 * to verify platform parameters from BL2 to BL31.
+	 * In release builds, it's not used.
+	 */
+	assert(((unsigned long long)plat_params_from_bl2) ==
+		LS_BL31_PLAT_PARAM_VAL);
+
+	/*
+	 * Check params passed from BL2 should not be NULL,
+	 */
+	bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
+
+	assert(params_from_bl2 != NULL);
+	assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
+	assert(params_from_bl2->h.version >= VERSION_2);
+
+	bl_params_node_t *bl_params = params_from_bl2->head;
+
+	/*
+	 * Copy BL33 and BL32 (if present), entry point information.
+	 * They are stored in Secure RAM, in BL2's address space.
+	 */
+	while (bl_params) {
+		if (bl_params->image_id == BL32_IMAGE_ID)
+			bl32_image_ep_info = *bl_params->ep_info;
+
+		if (bl_params->image_id == BL33_IMAGE_ID)
+			bl33_image_ep_info = *bl_params->ep_info;
+
+		bl_params = bl_params->next_params_info;
+	}
+
+	if (bl33_image_ep_info.pc == 0)
+		panic();
+
+#endif /* RESET_TO_BL31 */
+}
+
+/*******************************************************************************
+ * Perform any BL31 platform setup common to Layerscape platforms
+ ******************************************************************************/
+void ls_bl31_platform_setup(void)
+{
+	uint32_t gicc_base, gicd_base;
+
+	NOTICE(FIRMWARE_WELCOME_STR_LS1043_BL31);
+	/* Initialize the GIC driver, cpu and distributor interfaces */
+	get_gic_offset(&gicc_base, &gicd_base);
+	ls_gic_data.gicd_base = (uintptr_t)gicd_base;
+	ls_gic_data.gicc_base = (uintptr_t)gicc_base;
+	gicv2_driver_init(&ls_gic_data);
+	gicv2_distif_init();
+	gicv2_pcpu_distif_init();
+	gicv2_cpuif_enable();
+
+#if RESET_TO_BL31
+	/*
+	 * Do initial security configuration to allow DRAM/device access
+	 * (if earlier BL has not already done so).
+	 */
+	plat_ls_security_setup();
+
+#endif /* RESET_TO_BL31 */
+
+	/* Enable and initialize the System level generic timer */
+	mmio_write_32(LS1043_SYS_CNTCTL_BASE + CNTCR_OFF,
+			CNTCR_FCREQ(0) | CNTCR_EN);
+
+	VERBOSE("Leave arm_bl31_platform_setup\n");
+}
+
+/*******************************************************************************
+ * Perform any BL31 platform runtime setup prior to BL31 exit common to Layerscape
+ * platforms
+ ******************************************************************************/
+void ls_bl31_plat_runtime_setup(void)
+{
+	static console_ls_16550_t console;
+
+	/* Initialize the runtime console */
+	console_ls_16550_register(PLAT_LS1043_UART_BASE, PLAT_LS1043_UART_CLOCK,
+				PLAT_LS1043_UART_BAUDRATE, &console);
+}
+
+void bl31_platform_setup(void)
+{
+	ls_bl31_platform_setup();
+}
+
+void bl31_plat_runtime_setup(void)
+{
+	ls_bl31_plat_runtime_setup();
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup shared between
+ * Layerscape platforms. This only does basic initialization. Later
+ * architectural setup (bl31_arch_setup()) does not do anything platform
+ * specific.
+ ******************************************************************************/
+void ls_bl31_plat_arch_setup(void)
+{
+	ls_setup_page_tables(BL31_BASE,
+			      BL31_END - BL31_BASE,
+			      BL_CODE_BASE,
+			      BL_CODE_END,
+			      BL_RO_DATA_BASE,
+			      BL_RO_DATA_END
+#if USE_COHERENT_MEM
+			      , BL_COHERENT_RAM_BASE,
+			      BL_COHERENT_RAM_END
+#endif
+			      );
+	enable_mmu_el3(0);
+}
+
+void bl31_plat_arch_setup(void)
+{
+	ls_bl31_plat_arch_setup();
+}
diff --git a/plat/layerscape/common/ls_common.c b/plat/layerscape/common/ls_common.c
new file mode 100644
index 0000000..abf6525
--- /dev/null
+++ b/plat/layerscape/common/ls_common.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <arch.h>
+#include <arch_helpers.h>
+#include <xlat_tables_v2.h>
+#include <assert.h>
+#include <debug.h>
+#include <mmio.h>
+#include "platform_def.h"
+
+const mmap_region_t *plat_ls_get_mmap(void);
+
+/*
+ * Table of memory regions for various BL stages to map using the MMU.
+ * This doesn't include Trusted SRAM as ls_setup_page_tables() already
+ * takes care of mapping it.
+ *
+ * The flash needs to be mapped as writable in order to erase the FIP's Table of
+ * Contents in case of unrecoverable error (see plat_error_handler()).
+ */
+#ifdef IMAGE_BL1
+const mmap_region_t plat_ls_mmap[] = {
+	LS_MAP_FLASH0_RW,
+	LS_MAP_NS_DRAM,
+	LS_MAP_CCSR,
+	{0}
+};
+#endif
+#ifdef IMAGE_BL2
+const mmap_region_t plat_ls_mmap[] = {
+	LS_MAP_FLASH0_RW,
+	LS_MAP_CCSR,
+	LS_MAP_NS_DRAM,
+	LS_MAP_TSP_SEC_MEM,
+	{0}
+};
+#endif
+#ifdef IMAGE_BL31
+const mmap_region_t plat_ls_mmap[] = {
+	LS_MAP_CCSR,
+	LS_MAP_FLASH0_RW,
+	LS_MAP_NS_DRAM,
+	LS_MAP_TSP_SEC_MEM,
+	{0}
+};
+#endif
+#ifdef IMAGE_BL32
+const mmap_region_t plat_ls_mmap[] = {
+	LS_MAP_CCSR,
+	LS_MAP_FLASH0_RW,
+	LS_MAP_TSP_SEC_MEM,
+	{0}
+};
+#endif
+/*
+ * Set up the page tables for the generic and platform-specific memory regions.
+ * The extents of the generic memory regions are specified by the function
+ * arguments and consist of:
+ * - Trusted SRAM seen by the BL image;
+ * - Code section;
+ * - Read-only data section;
+ * - Coherent memory region, if applicable.
+ */
+void ls_setup_page_tables(uintptr_t total_base,
+			   size_t total_size,
+			   uintptr_t code_start,
+			   uintptr_t code_limit,
+			   uintptr_t rodata_start,
+			   uintptr_t rodata_limit
+#if USE_COHERENT_MEM
+			   ,
+			   uintptr_t coh_start,
+			   uintptr_t coh_limit
+#endif
+			   )
+{
+	/* Now (re-)map the platform-specific memory regions */
+	mmap_add(plat_ls_get_mmap());
+	/*
+	 * Map the Trusted SRAM with appropriate memory attributes.
+	 * Subsequent mappings will adjust the attributes for specific regions.
+	 */
+	VERBOSE("Trusted SRAM seen by this BL image: %p - %p\n",
+		(void *) total_base, (void *) (total_base + total_size));
+	mmap_add_region(total_base, total_base,
+			total_size,
+			MT_MEMORY | MT_RW | MT_SECURE);
+
+	/* Re-map the code section */
+	VERBOSE("Code region: %p - %p\n",
+		(void *) code_start, (void *) code_limit);
+	mmap_add_region(code_start, code_start,
+			code_limit - code_start,
+			MT_CODE | MT_SECURE);
+
+	/* Re-map the read-only data section */
+	VERBOSE("Read-only data region: %p - %p\n",
+		(void *) rodata_start, (void *) rodata_limit);
+	mmap_add_region(rodata_start, rodata_start,
+			rodata_limit - rodata_start,
+			MT_RO_DATA | MT_SECURE);
+
+#if USE_COHERENT_MEM
+	/* Re-map the coherent memory region */
+	VERBOSE("Coherent region: %p - %p\n",
+		(void *) coh_start, (void *) coh_limit);
+	mmap_add_region(coh_start, coh_start,
+			coh_limit - coh_start,
+			MT_DEVICE | MT_RW | MT_SECURE);
+#endif
+
+	/* Create the page tables to reflect the above mappings */
+	init_xlat_tables();
+}
+
+uintptr_t plat_get_ns_image_entrypoint(void)
+{
+#ifdef PRELOADED_BL33_BASE
+	return PRELOADED_BL33_BASE;
+#else
+	return LS_NS_DRAM_BASE;
+#endif
+}
+
+/*******************************************************************************
+ * Gets SPSR for BL32 entry
+ ******************************************************************************/
+uint32_t ls_get_spsr_for_bl32_entry(void)
+{
+	/*
+	 * The Secure Payload Dispatcher service is responsible for
+	 * setting the SPSR prior to entry into the BL32 image.
+	 */
+	return 0;
+}
+
+/*******************************************************************************
+ * Gets SPSR for BL33 entry
+ ******************************************************************************/
+#ifndef AARCH32
+uint32_t ls_get_spsr_for_bl33_entry(void)
+{
+	unsigned int mode;
+	uint32_t spsr;
+
+	/* Figure out what mode we enter the non-secure world in */
+	mode = EL_IMPLEMENTED(2) ? MODE_EL2 : MODE_EL1;
+
+	/*
+	 * TODO: Consider the possibility of specifying the SPSR in
+	 * the FIP ToC and allowing the platform to have a say as
+	 * well.
+	 */
+	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+	return spsr;
+}
+#else
+/*******************************************************************************
+ * Gets SPSR for BL33 entry
+ ******************************************************************************/
+uint32_t ls_get_spsr_for_bl33_entry(void)
+{
+	unsigned int hyp_status, mode, spsr;
+
+	hyp_status = GET_VIRT_EXT(read_id_pfr1());
+
+	mode = (hyp_status) ? MODE32_hyp : MODE32_svc;
+
+	/*
+	 * TODO: Consider the possibility of specifying the SPSR in
+	 * the FIP ToC and allowing the platform to have a say as
+	 * well.
+	 */
+	spsr = SPSR_MODE32(mode, plat_get_ns_image_entrypoint() & 0x1,
+			SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
+	return spsr;
+}
+#endif /* AARCH32 */
+
+/*******************************************************************************
+ * Returns Layerscape platform specific memory map regions.
+ ******************************************************************************/
+const mmap_region_t *plat_ls_get_mmap(void)
+{
+	return plat_ls_mmap;
+}
+
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+	unsigned int counter_base_frequency;
+
+	counter_base_frequency = COUNTER_FREQUENCY;
+
+	return counter_base_frequency;
+}
diff --git a/plat/layerscape/common/ls_common.mk b/plat/layerscape/common/ls_common.mk
new file mode 100644
index 0000000..1a80e9f
--- /dev/null
+++ b/plat/layerscape/common/ls_common.mk
@@ -0,0 +1,62 @@
+#
+# Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+
+# Process LS1043_DISABLE_TRUSTED_WDOG flag
+# TODO:Temparally disabled it on development phase, not implemented yet
+LS1043_DISABLE_TRUSTED_WDOG	:=	1
+
+# On Layerscape platforms, separate the code and read-only data sections to allow
+# mapping the former as executable and the latter as execute-never.
+SEPARATE_CODE_AND_RODATA	:=	1
+
+# Enable new version of image loading on Layerscape platforms
+LOAD_IMAGE_V2			:=	1
+
+# Use generic OID definition (tbbr_oid.h)
+USE_TBBR_DEFS			:=	1
+
+
+COLD_BOOT_SINGLE_CPU		:=	1
+
+PLAT_INCLUDES		+=	-Iinclude/common/tbbr
+
+PLAT_BL_COMMON_SOURCES	+=	plat/layerscape/common/${ARCH}/ls_helpers.S		\
+				plat/layerscape/common/ls_common.c
+
+include lib/xlat_tables_v2/xlat_tables.mk
+
+PLAT_BL_COMMON_SOURCES	+=	${XLAT_TABLES_LIB_SRCS}
+
+BL1_SOURCES		+=			\
+				drivers/io/io_fip.c				\
+				drivers/io/io_memmap.c				\
+				drivers/io/io_storage.c				\
+				plat/layerscape/common/ls_timer.c			\
+				plat/layerscape/common/ls_bl1_setup.c			\
+				plat/layerscape/common/ls_io_storage.c
+
+BL2_SOURCES		+=	drivers/io/io_fip.c				\
+				drivers/io/io_memmap.c				\
+				drivers/io/io_storage.c				\
+				plat/layerscape/common/ls_timer.c			\
+				plat/layerscape/common/ls_bl2_setup.c			\
+				plat/layerscape/common/ls_io_storage.c
+BL2_SOURCES		+=	plat/layerscape/common/${ARCH}/ls_bl2_mem_params_desc.c
+BL2_SOURCES		+=	plat/layerscape/common/ls_image_load.c		\
+					common/desc_image_load.c
+
+BL31_SOURCES		+=	plat/layerscape/common/ls_bl31_setup.c		\
+				plat/layerscape/common/ls_timer.c			\
+				plat/layerscape/common/ls_topology.c			\
+				plat/layerscape/common/ns_access.c		\
+				plat/common/plat_psci_common.c
+# Verify build config
+# -------------------
+
+ifneq (${LOAD_IMAGE_V2}, 1)
+  $(error Error: Layerscape needs LOAD_IMAGE_V2=1)
+endif
diff --git a/plat/layerscape/common/ls_image_load.c b/plat/layerscape/common/ls_image_load.c
new file mode 100644
index 0000000..909bec2
--- /dev/null
+++ b/plat/layerscape/common/ls_image_load.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <desc_image_load.h>
+#include "ls_def.h"
+
+/*******************************************************************************
+ * This function flushes the data structures so that they are visible
+ * in memory for the next BL image.
+ ******************************************************************************/
+void plat_flush_next_bl_params(void)
+{
+	flush_bl_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of loadable images.
+ ******************************************************************************/
+bl_load_info_t *plat_get_bl_image_load_info(void)
+{
+	return get_bl_load_info_from_mem_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of executable images.
+ ******************************************************************************/
+bl_params_t *plat_get_next_bl_params(void)
+{
+	return get_next_bl_params_from_mem_params_desc();
+}
diff --git a/plat/layerscape/common/ls_io_storage.c b/plat/layerscape/common/ls_io_storage.c
new file mode 100644
index 0000000..7402366
--- /dev/null
+++ b/plat/layerscape/common/ls_io_storage.c
@@ -0,0 +1,175 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <assert.h>
+#include <debug.h>
+#include <firmware_image_package.h>
+#include <io_driver.h>
+#include <io_fip.h>
+#include <io_memmap.h>
+#include <io_storage.h>
+#include "platform_def.h"
+
+/* IO devices */
+static const io_dev_connector_t *fip_dev_con;
+static uintptr_t fip_dev_handle;
+static const io_dev_connector_t *memmap_dev_con;
+static uintptr_t memmap_dev_handle;
+
+static const io_block_spec_t fip_block_spec = {
+	.offset = PLAT_LS_FIP_BASE,
+	.length = PLAT_LS_FIP_MAX_SIZE
+};
+
+static const io_uuid_spec_t bl2_uuid_spec = {
+	.uuid = UUID_TRUSTED_BOOT_FIRMWARE_BL2,
+};
+
+static const io_uuid_spec_t bl31_uuid_spec = {
+	.uuid = UUID_EL3_RUNTIME_FIRMWARE_BL31,
+};
+
+static const io_uuid_spec_t bl32_uuid_spec = {
+	.uuid = UUID_SECURE_PAYLOAD_BL32,
+};
+
+static const io_uuid_spec_t bl33_uuid_spec = {
+	.uuid = UUID_NON_TRUSTED_FIRMWARE_BL33,
+};
+
+static int open_fip(const uintptr_t spec);
+static int open_memmap(const uintptr_t spec);
+
+struct plat_io_policy {
+	uintptr_t *dev_handle;
+	uintptr_t image_spec;
+	int (*check)(const uintptr_t spec);
+};
+
+static const struct plat_io_policy policies[] = {
+	[FIP_IMAGE_ID] = {
+		&memmap_dev_handle,
+		(uintptr_t)&fip_block_spec,
+		open_memmap
+	},
+	[BL2_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl2_uuid_spec,
+		open_fip
+	},
+	[BL31_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl31_uuid_spec,
+		open_fip
+	},
+	[BL32_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl32_uuid_spec,
+		open_fip
+	},
+	[BL33_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl33_uuid_spec,
+		open_fip
+	},
+};
+
+static int open_fip(const uintptr_t spec)
+{
+	int result;
+	uintptr_t local_image_handle;
+
+	/* See if a Firmware Image Package is available */
+	result = io_dev_init(fip_dev_handle, (uintptr_t)FIP_IMAGE_ID);
+	if (result == 0) {
+		result = io_open(fip_dev_handle, spec, &local_image_handle);
+		if (result == 0) {
+			VERBOSE("Using FIP\n");
+			io_close(local_image_handle);
+		}
+	}
+	return result;
+}
+
+
+static int open_memmap(const uintptr_t spec)
+{
+	int result;
+	uintptr_t local_image_handle;
+
+	result = io_dev_init(memmap_dev_handle, (uintptr_t)NULL);
+	if (result == 0) {
+		result = io_open(memmap_dev_handle, spec, &local_image_handle);
+		if (result == 0) {
+			VERBOSE("Using Memmap\n");
+			io_close(local_image_handle);
+		}
+	}
+	return result;
+}
+
+
+void ls_io_setup(void)
+{
+	int io_result;
+
+	io_result = register_io_dev_fip(&fip_dev_con);
+	assert(io_result == 0);
+
+	io_result = register_io_dev_memmap(&memmap_dev_con);
+	assert(io_result == 0);
+
+	/* Open connections to devices and cache the handles */
+	io_result = io_dev_open(fip_dev_con, (uintptr_t)NULL,
+				&fip_dev_handle);
+	assert(io_result == 0);
+
+	io_result = io_dev_open(memmap_dev_con, (uintptr_t)NULL,
+				&memmap_dev_handle);
+	assert(io_result == 0);
+
+	/* Ignore improbable errors in release builds */
+	(void)io_result;
+}
+
+void plat_ls_io_setup(void)
+{
+	ls_io_setup();
+}
+
+int plat_ls_get_alt_image_source(
+	unsigned int image_id __unused,
+	uintptr_t *dev_handle __unused,
+	uintptr_t *image_spec __unused)
+{
+	/* By default do not try an alternative */
+	return -ENOENT;
+}
+
+/*
+ * Return an IO device handle and specification which can be used to access
+ * an image. Use this to enforce platform load policy.
+ */
+int plat_get_image_source(unsigned int image_id, uintptr_t *dev_handle,
+			  uintptr_t *image_spec)
+{
+	int result;
+	const struct plat_io_policy *policy;
+
+	assert(image_id < ARRAY_SIZE(policies));
+
+	policy = &policies[image_id];
+	result = policy->check(policy->image_spec);
+	if (result == 0) {
+		*image_spec = policy->image_spec;
+		*dev_handle = *(policy->dev_handle);
+	} else {
+		VERBOSE("Trying alternative IO\n");
+		result = plat_ls_get_alt_image_source(image_id, dev_handle,
+						       image_spec);
+	}
+
+	return result;
+}
diff --git a/plat/layerscape/common/ls_timer.c b/plat/layerscape/common/ls_timer.c
new file mode 100644
index 0000000..25b5e63
--- /dev/null
+++ b/plat/layerscape/common/ls_timer.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <mmio.h>
+#include <delay_timer.h>
+#include <arch_helpers.h>
+
+#define TIMER_BASE_ADDR 0x02B00000
+
+uint64_t ls_get_timer(uint64_t start)
+{
+	return read_cntpct_el0() * 1000 / read_cntfrq_el0() - start;
+}
+
+static uint32_t ls_timeus_get_value(void)
+{
+	/*
+	 * Generic delay timer implementation expects the timer to be a down
+	 * counter. We apply bitwise NOT operator to the tick values returned
+	 * by read_cntpct_el0() to simulate the down counter. The value is
+	 * clipped from 64 to 32 bits.
+	 */
+	return (uint32_t)(~read_cntpct_el0());
+}
+
+static const timer_ops_t ls_timer_ops = {
+	.get_timer_value	= ls_timeus_get_value,
+	.clk_mult		= 1,
+	.clk_div		= 25,
+};
+
+
+/*
+ * Initialise the nxp layerscape on-chip free rolling us counter as the delay
+ * timer.
+ */
+void ls_delay_timer_init(void)
+{
+	uintptr_t cntcr =  TIMER_BASE_ADDR;
+
+	mmio_write_32(cntcr, 0x1);
+
+	timer_init(&ls_timer_ops);
+}
diff --git a/plat/layerscape/common/ls_topology.c b/plat/layerscape/common/ls_topology.c
new file mode 100644
index 0000000..5b76087
--- /dev/null
+++ b/plat/layerscape/common/ls_topology.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "plat_ls.h"
+
+/*******************************************************************************
+ * This function validates an MPIDR by checking whether it falls within the
+ * acceptable bounds. An error code (-1) is returned if an incorrect mpidr
+ * is passed.
+ ******************************************************************************/
+int ls_check_mpidr(u_register_t mpidr)
+{
+	unsigned int cluster_id, cpu_id;
+	uint64_t valid_mask;
+
+	valid_mask = ~(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK);
+	cluster_id = (mpidr >> MPIDR_AFF1_SHIFT) & MPIDR_AFFLVL_MASK;
+	cpu_id = (mpidr >> MPIDR_AFF0_SHIFT) & MPIDR_AFFLVL_MASK;
+
+	mpidr &= MPIDR_AFFINITY_MASK;
+	if (mpidr & valid_mask)
+		return -1;
+
+	if (cluster_id >= PLAT_LS_CLUSTER_COUNT)
+		return -1;
+
+	/*
+	 * Validate cpu_id by checking whether it represents a CPU in
+	 * one of the two clusters present on the platform.
+	 */
+	if (cpu_id >= plat_ls_get_cluster_core_count(mpidr))
+		return -1;
+
+
+	return 0;
+}
diff --git a/plat/layerscape/common/ls_tzc380.c b/plat/layerscape/common/ls_tzc380.c
new file mode 100644
index 0000000..b9f32ac
--- /dev/null
+++ b/plat/layerscape/common/ls_tzc380.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <debug.h>
+#include <mmio.h>
+#include <endian.h>
+#include "platform_def.h"
+#include "soc_tzasc.h"
+
+int tzc380_set_region(unsigned int tzasc_base, unsigned int region_id,
+		unsigned int enabled, unsigned int low_addr,
+		unsigned int high_addr, unsigned int size,
+		unsigned int security, unsigned int subreg_disable_mask)
+{
+	unsigned int reg;
+	unsigned int reg_base;
+	unsigned int attr_value;
+
+	reg_base = (tzasc_base + TZASC_REGIONS_REG + (region_id << 4));
+
+	if (region_id == 0) {
+		reg = (reg_base + TZASC_REGION_ATTR_OFFSET);
+		mmio_write_32((uintptr_t)reg, ((security & 0xF) << 28));
+	} else {
+		reg = reg_base + TZASC_REGION_LOWADDR_OFFSET;
+		mmio_write_32((uintptr_t)reg,
+				(low_addr & TZASC_REGION_LOWADDR_MASK));
+
+		reg = reg_base + TZASC_REGION_HIGHADDR_OFFSET;
+		mmio_write_32((uintptr_t)reg, high_addr);
+
+		reg = reg_base + TZASC_REGION_ATTR_OFFSET;
+		attr_value = ((security & 0xF) << 28) |
+			((subreg_disable_mask & 0xFF) << 8) |
+			((size & 0x3F) << 1) | (enabled & 0x1);
+		mmio_write_32((uintptr_t)reg, attr_value);
+
+	}
+	return 0;
+}
+
+int tzc380_setup(void)
+{
+	int reg_id = 0;
+
+	INFO("Configuring TZASC-380\n");
+
+	/*
+	 * Configure CCI control override register to terminate all barrier
+	 * transactions
+	 */
+	mmio_write_32(PLAT_LS1043_CCI_BASE, CCI_TERMINATE_BARRIER_TX);
+
+	/* Configure CSU secure access register to disable TZASC bypass mux */
+	mmio_write_32((uintptr_t)(CONFIG_SYS_FSL_CSU_ADDR +
+				CSU_SEC_ACCESS_REG_OFFSET),
+			bswap32(TZASC_BYPASS_MUX_DISABLE));
+
+	for (reg_id = 0; reg_id < MAX_NUM_TZC_REGION; reg_id++) {
+		tzc380_set_region(CONFIG_SYS_FSL_TZASC_ADDR,
+				reg_id,
+				tzc380_reg_list[reg_id].enabled,
+				tzc380_reg_list[reg_id].low_addr,
+				tzc380_reg_list[reg_id].high_addr,
+				tzc380_reg_list[reg_id].size,
+				tzc380_reg_list[reg_id].secure,
+				tzc380_reg_list[reg_id].sub_mask);
+	}
+
+	return 0;
+}
diff --git a/plat/layerscape/common/ns_access.c b/plat/layerscape/common/ns_access.c
new file mode 100644
index 0000000..e1daaed
--- /dev/null
+++ b/plat/layerscape/common/ns_access.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <mmio.h>
+#include <endian.h>
+#include <debug.h>
+#include "ns_access.h"
+#include "platform_def.h"
+
+static void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num)
+{
+	uint32_t *base = (uint32_t *)CONFIG_SYS_FSL_CSU_ADDR;
+	uint32_t *reg;
+	uint32_t val;
+	int i;
+
+	for (i = 0; i < num; i++) {
+		reg = base + ns_dev[i].ind / 2;
+		val = be32toh(mmio_read_32((uintptr_t)reg));
+		if (ns_dev[i].ind % 2 == 0) {
+			val &= 0x0000ffff;
+			val |= ns_dev[i].val << 16;
+		} else {
+			val &= 0xffff0000;
+			val |= ns_dev[i].val;
+		}
+		mmio_write_32((uintptr_t)reg, htobe32(val));
+	}
+}
+
+void enable_layerscape_ns_access(void)
+{
+	enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
+}
diff --git a/plat/layerscape/common/tsp/ls_tsp.mk b/plat/layerscape/common/tsp/ls_tsp.mk
new file mode 100644
index 0000000..7cb9781
--- /dev/null
+++ b/plat/layerscape/common/tsp/ls_tsp.mk
@@ -0,0 +1,10 @@
+#
+# Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# TSP source files common to ARM standard platforms
+BL32_SOURCES		+=	plat/layerscape/common/ls_topology.c			\
+				plat/layerscape/common/tsp/ls_tsp_setup.c		\
+				plat/common/aarch64/platform_mp_stack.S
diff --git a/plat/layerscape/common/tsp/ls_tsp_setup.c b/plat/layerscape/common/tsp/ls_tsp_setup.c
new file mode 100644
index 0000000..82ac965
--- /dev/null
+++ b/plat/layerscape/common/tsp/ls_tsp_setup.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <gicv2.h>
+#include <debug.h>
+#include "ls_16550.h"
+#include "plat_ls.h"
+#include "soc.h"
+
+#define BL32_END (unsigned long)(&__BL32_END__)
+
+const unsigned int g0_interrupt_array1[] = {
+	9
+};
+
+gicv2_driver_data_t ls_gic_data = {
+	.gicd_base = GICD_BASE,
+	.gicc_base = GICC_BASE,
+	.g0_interrupt_num = ARRAY_SIZE(g0_interrupt_array1),
+	.g0_interrupt_array = g0_interrupt_array1,
+};
+
+/*******************************************************************************
+ * Initialize the UART
+ ******************************************************************************/
+void ls_tsp_early_platform_setup(void)
+{
+	static console_ls_16550_t console;
+	/*
+	 * Initialize a different console than already in use to display
+	 * messages from TSP
+	 */
+	console_ls_16550_register(PLAT_LS1043_UART2_BASE, PLAT_LS1043_UART_CLOCK,
+			PLAT_LS1043_UART_BAUDRATE, &console);
+	NOTICE(FIRMWARE_WELCOME_STR_LS1043_BL32);
+}
+
+/*******************************************************************************
+ * Perform platform specific setup placeholder
+ ******************************************************************************/
+void tsp_platform_setup(void)
+{
+	uint32_t gicc_base, gicd_base;
+
+	/* Initialize the GIC driver, cpu and distributor interfaces */
+	get_gic_offset(&gicc_base, &gicd_base);
+	ls_gic_data.gicd_base = (uintptr_t)gicd_base;
+	ls_gic_data.gicc_base = (uintptr_t)gicc_base;
+	gicv2_driver_init(&ls_gic_data);
+	gicv2_distif_init();
+	gicv2_pcpu_distif_init();
+	gicv2_cpuif_enable();
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup here. At the
+ * moment this is only intializes the MMU
+ ******************************************************************************/
+void tsp_plat_arch_setup(void)
+{
+	ls_setup_page_tables(BL32_BASE,
+			      (BL32_END - BL32_BASE),
+			      BL_CODE_BASE,
+			      BL_CODE_END,
+			      BL_RO_DATA_BASE,
+			      BL_RO_DATA_END
+#if USE_COHERENT_MEM
+			      , BL_COHERENT_RAM_BASE,
+			      BL_COHERENT_RAM_END
+#endif
+			      );
+	enable_mmu_el1(0);
+}
diff --git a/plat/layerscape/common/tsp/platform_tsp.h b/plat/layerscape/common/tsp/platform_tsp.h
new file mode 100644
index 0000000..b1c96cb
--- /dev/null
+++ b/plat/layerscape/common/tsp/platform_tsp.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __PLATFORM_TSP_H__
+#define __PLATFORM_TSP_H__
+
+/*******************************************************************************
+ * Mandatory TSP functions (only if platform contains a TSP)
+ ******************************************************************************/
+void tsp_early_platform_setup(void);
+void tsp_plat_arch_setup(void);
+void tsp_platform_setup(void);
+
+#endif /* __PLATFORM_TSP_H__ */