docs(ethos-n): update build-options.rst
Move documentation related to Arm(R) Ethos(TM)-N NPU driver from
docs/plat/arm/arm-build-options.rst to
docs/getting_started/build-options.rst.
Signed-off-by: Rajasekaran Kalidoss <rajasekaran.kalidoss@arm.com>
Change-Id: I388e8dcd3950b11bc3305f5e6396ee2e49c04493
diff --git a/docs/porting-guide.rst b/docs/porting-guide.rst
index f074021..5a017ce 100644
--- a/docs/porting-guide.rst
+++ b/docs/porting-guide.rst
@@ -591,32 +591,32 @@
If the platform port uses the Arm® Ethos™-N NPU driver with TZMP1 support
enabled, the following constants and configuration must also be defined:
-- **ARM_ETHOSN_NPU_PROT_FW_NSAID**
+- **ETHOSN_NPU_PROT_FW_NSAID**
Defines the Non-secure Access IDentity (NSAID) that the NPU shall use to
access the protected memory that contains the NPU's firmware.
-- **ARM_ETHOSN_NPU_PROT_DATA_RW_NSAID**
+- **ETHOSN_NPU_PROT_DATA_RW_NSAID**
Defines the Non-secure Access IDentity (NSAID) that the NPU shall use for
read/write access to the protected memory that contains inference data.
-- **ARM_ETHOSN_NPU_PROT_DATA_RO_NSAID**
+- **ETHOSN_NPU_PROT_DATA_RO_NSAID**
Defines the Non-secure Access IDentity (NSAID) that the NPU shall use for
read-only access to the protected memory that contains inference data.
-- **ARM_ETHOSN_NPU_NS_RW_DATA_NSAID**
+- **ETHOSN_NPU_NS_RW_DATA_NSAID**
Defines the Non-secure Access IDentity (NSAID) that the NPU shall use for
read/write access to the non-protected memory.
-- **ARM_ETHOSN_NPU_NS_RO_DATA_NSAID**
+- **ETHOSN_NPU_NS_RO_DATA_NSAID**
Defines the Non-secure Access IDentity (NSAID) that the NPU shall use for
read-only access to the non-protected memory.
-- **ARM_ETHOSN_NPU_FW_IMAGE_BASE** and **ARM_ETHOSN_NPU_FW_IMAGE_LIMIT**
+- **ETHOSN_NPU_FW_IMAGE_BASE** and **ETHOSN_NPU_FW_IMAGE_LIMIT**
Defines the physical address range that the NPU's firmware will be loaded
into and executed from.
@@ -634,10 +634,10 @@
- Add MMU mappings such that:
- BL2 can write the NPU firmware into the region defined by
- ``ARM_ETHOSN_NPU_FW_IMAGE_BASE`` and ``ARM_ETHOSN_NPU_FW_IMAGE_LIMIT``
+ ``ETHOSN_NPU_FW_IMAGE_BASE`` and ``ETHOSN_NPU_FW_IMAGE_LIMIT``
- BL31 (SiP service) can read the NPU firmware from the same region
-- Add the firmware image ID ``ARM_ETHOSN_NPU_FW_IMAGE_ID`` to the list of images
+- Add the firmware image ID ``ETHOSN_NPU_FW_IMAGE_ID`` to the list of images
loaded by BL2.
Please see the reference implementation code for the Juno platform as an example.