diff --git a/plat/qti/sc7280/inc/platform_def.h b/plat/qti/sc7280/inc/platform_def.h
new file mode 100644
index 0000000..660cb33
--- /dev/null
+++ b/plat/qti/sc7280/inc/platform_def.h
@@ -0,0 +1,194 @@
+/*
+ * Copyright (c) 2018, Arm Limited and Contributors. All rights reserved.
+ * Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+/* Enable the dynamic translation tables library. */
+#define PLAT_XLAT_TABLES_DYNAMIC	1
+
+#include <common_def.h>
+
+#include <qti_board_def.h>
+#include <qtiseclib_defs_plat.h>
+
+/*----------------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------------*/
+/*
+ * MPIDR_PRIMARY_CPU
+ * You just need to have the correct core_affinity_val i.e. [7:0]
+ * and cluster_affinity_val i.e. [15:8]
+ * the other bits will be ignored
+ */
+/*----------------------------------------------------------------------------*/
+#define MPIDR_PRIMARY_CPU	0x0000
+/*----------------------------------------------------------------------------*/
+
+#define QTI_PWR_LVL0		MPIDR_AFFLVL0
+#define QTI_PWR_LVL1		MPIDR_AFFLVL1
+#define QTI_PWR_LVL2		MPIDR_AFFLVL2
+#define QTI_PWR_LVL3		MPIDR_AFFLVL3
+
+/*
+ *  Macros for local power states encoded by State-ID field
+ *  within the power-state parameter.
+ */
+/* Local power state for power domains in Run state. */
+#define QTI_LOCAL_STATE_RUN	0
+/*
+ * Local power state for clock-gating. Valid only for CPU and not cluster power
+ * domains
+ */
+#define QTI_LOCAL_STATE_STB	1
+/*
+ * Local power state for retention. Valid for CPU and cluster power
+ * domains
+ */
+#define QTI_LOCAL_STATE_RET	2
+/*
+ * Local power state for OFF/power down. Valid for CPU, cluster, RSC and PDC
+ * power domains
+ */
+#define QTI_LOCAL_STATE_OFF	3
+/*
+ * Local power state for DEEPOFF/power rail down. Valid for CPU, cluster and RSC
+ * power domains
+ */
+#define QTI_LOCAL_STATE_DEEPOFF	4
+
+/*
+ * This macro defines the deepest retention state possible. A higher state
+ * id will represent an invalid or a power down state.
+ */
+#define PLAT_MAX_RET_STATE	QTI_LOCAL_STATE_RET
+
+/*
+ * This macro defines the deepest power down states possible. Any state ID
+ * higher than this is invalid.
+ */
+#define PLAT_MAX_OFF_STATE	QTI_LOCAL_STATE_DEEPOFF
+
+/******************************************************************************
+ * Required platform porting definitions common to all ARM standard platforms
+ *****************************************************************************/
+
+/*
+ * Platform specific page table and MMU setup constants.
+ */
+#define MAX_MMAP_REGIONS	(PLAT_QTI_MMAP_ENTRIES)
+
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ull << 36)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ull << 36)
+
+#define ARM_CACHE_WRITEBACK_SHIFT	6
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_GRANULE		(1 << ARM_CACHE_WRITEBACK_SHIFT)
+
+/*
+ * One cache line needed for bakery locks on ARM platforms
+ */
+#define PLAT_PERCPU_BAKERY_LOCK_SIZE	(1 * CACHE_WRITEBACK_GRANULE)
+
+/*----------------------------------------------------------------------------*/
+/* PSCI power domain topology definitions */
+/*----------------------------------------------------------------------------*/
+/* One domain each to represent RSC and PDC level */
+#define PLAT_PDC_COUNT			1
+#define PLAT_RSC_COUNT			1
+
+/* There is one top-level FCM cluster */
+#define PLAT_CLUSTER_COUNT		1
+
+/* No. of cores in the FCM cluster */
+#define PLAT_CLUSTER0_CORE_COUNT	8
+
+#define PLATFORM_CORE_COUNT		(PLAT_CLUSTER0_CORE_COUNT)
+
+#define PLAT_NUM_PWR_DOMAINS		(PLAT_PDC_COUNT +\
+					PLAT_RSC_COUNT	+\
+					PLAT_CLUSTER_COUNT	+\
+					PLATFORM_CORE_COUNT)
+
+#define PLAT_MAX_PWR_LVL		3
+
+/*****************************************************************************/
+/* Memory mapped Generic timer interfaces  */
+/*****************************************************************************/
+
+/*----------------------------------------------------------------------------*/
+/* GIC-600 constants */
+/*----------------------------------------------------------------------------*/
+#define BASE_GICD_BASE		0x17A00000
+#define BASE_GICR_BASE		0x17A60000
+#define BASE_GICC_BASE		0x0
+#define BASE_GICH_BASE		0x0
+#define BASE_GICV_BASE		0x0
+
+#define QTI_GICD_BASE		BASE_GICD_BASE
+#define QTI_GICR_BASE		BASE_GICR_BASE
+#define QTI_GICC_BASE		BASE_GICC_BASE
+
+/*----------------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------------*/
+/* UART related constants. */
+/*----------------------------------------------------------------------------*/
+/* BASE ADDRESS OF DIFFERENT REGISTER SPACES IN HW */
+#define GENI4_CFG				0x0
+#define GENI4_IMAGE_REGS			0x100
+#define GENI4_DATA				0x600
+
+/* COMMON STATUS/CONFIGURATION REGISTERS AND MASKS */
+#define GENI_STATUS_REG				(GENI4_CFG + 0x00000040)
+#define GENI_STATUS_M_GENI_CMD_ACTIVE_MASK	(0x1)
+#define UART_TX_TRANS_LEN_REG			(GENI4_IMAGE_REGS + 0x00000170)
+/* MASTER/TX ENGINE REGISTERS */
+#define GENI_M_CMD0_REG				(GENI4_DATA + 0x00000000)
+/* FIFO, STATUS REGISTERS AND MASKS */
+#define GENI_TX_FIFOn_REG			(GENI4_DATA + 0x00000100)
+
+#define GENI_M_CMD_TX				(0x08000000)
+
+/*----------------------------------------------------------------------------*/
+/* Device address space for mapping. Excluding starting 4K */
+/*----------------------------------------------------------------------------*/
+#define QTI_DEVICE_BASE				0x1000
+#define QTI_DEVICE_SIZE				(0x80000000 - QTI_DEVICE_BASE)
+
+/*******************************************************************************
+ * BL31 specific defines.
+ ******************************************************************************/
+/*
+ * Put BL31 at DDR as per memory map. BL31_BASE is calculated using the
+ * current BL31 debug size plus a little space for growth.
+ */
+#define BL31_LIMIT				(BL31_BASE + BL31_SIZE)
+
+/*----------------------------------------------------------------------------*/
+/* AOSS registers */
+/*----------------------------------------------------------------------------*/
+#define QTI_PS_HOLD_REG				0x0C264000
+/*----------------------------------------------------------------------------*/
+/* AOP CMD DB  address space for mapping */
+/*----------------------------------------------------------------------------*/
+#define QTI_AOP_CMD_DB_BASE			0x80860000
+#define QTI_AOP_CMD_DB_SIZE			0x00020000
+/*----------------------------------------------------------------------------*/
+/* SOC hw version register */
+/*----------------------------------------------------------------------------*/
+#define QTI_SOC_VERSION				U(0x7280)
+#define QTI_SOC_VERSION_MASK			U(0xFFFF)
+#define QTI_SOC_REVISION_REG			0x1FC8000
+#define QTI_SOC_REVISION_MASK			U(0xFFFF)
+/*----------------------------------------------------------------------------*/
+
+#endif /* PLATFORM_DEF_H */
diff --git a/plat/qti/sc7280/inc/qti_rng_io.h b/plat/qti/sc7280/inc/qti_rng_io.h
new file mode 100644
index 0000000..0f41fd6
--- /dev/null
+++ b/plat/qti/sc7280/inc/qti_rng_io.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef QTI_RNG_IO_H
+#define QTI_RNG_IO_H
+
+#define SEC_PRNG_STATUS			0x10D1004
+#define SEC_PRNG_STATUS_DATA_AVAIL_BMSK	0x1
+#define SEC_PRNG_DATA_OUT		0x10D1000
+
+
+#endif /* QTI_RNG_IO_H */
+
diff --git a/plat/qti/sc7280/inc/qti_secure_io_cfg.h b/plat/qti/sc7280/inc/qti_secure_io_cfg.h
new file mode 100644
index 0000000..058c5b5
--- /dev/null
+++ b/plat/qti/sc7280/inc/qti_secure_io_cfg.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef QTI_SECURE_IO_CFG_H
+#define QTI_SECURE_IO_CFG_H
+
+#include <stdint.h>
+
+/*
+ * List of peripheral/IO memory areas that are protected from
+ * non-secure world but not required to be secure.
+ */
+
+#define APPS_SMMU_TBU_PWR_STATUS		0x15002204
+#define APPS_SMMU_CUSTOM_CFG			0x15002300
+#define APPS_SMMU_STATS_SYNC_INV_TBU_ACK	0x150025DC
+#define APPS_SMMU_SAFE_SEC_CFG			0x15002648
+#define APPS_SMMU_MMU2QSS_AND_SAFE_WAIT_CNTR	0x15002670
+
+static const uintptr_t qti_secure_io_allowed_regs[] = {
+	APPS_SMMU_TBU_PWR_STATUS,
+	APPS_SMMU_CUSTOM_CFG,
+	APPS_SMMU_STATS_SYNC_INV_TBU_ACK,
+	APPS_SMMU_SAFE_SEC_CFG,
+	APPS_SMMU_MMU2QSS_AND_SAFE_WAIT_CNTR,
+};
+
+#endif /* QTI_SECURE_IO_CFG_H */
diff --git a/plat/qti/sc7280/platform.mk b/plat/qti/sc7280/platform.mk
new file mode 100644
index 0000000..6e26781
--- /dev/null
+++ b/plat/qti/sc7280/platform.mk
@@ -0,0 +1,119 @@
+#
+# Copyright (c) 2017-2018, Arm Limited and Contributors. All rights reserved.
+# Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Make for SC7280 QTI platform.
+
+QTI_PLAT_PATH		:=	plat/qti
+CHIPSET			:=	${PLAT}
+
+# Turn On Separate code & data.
+SEPARATE_CODE_AND_RODATA	:=	1
+USE_COHERENT_MEM		:=	1
+WARMBOOT_ENABLE_DCACHE_EARLY	:=	1
+
+# Disable the PSCI platform compatibility layer
+ENABLE_PLAT_COMPAT		:=	0
+
+# Enable PSCI v1.0 extended state ID format
+PSCI_EXTENDED_STATE_ID	:=  1
+ARM_RECOM_STATE_ID_ENC  :=  1
+
+COLD_BOOT_SINGLE_CPU		:=	1
+PROGRAMMABLE_RESET_ADDRESS	:=	1
+
+RESET_TO_BL31			:=	0
+
+MULTI_CONSOLE_API		:=	1
+
+QTI_SDI_BUILD := 0
+$(eval $(call assert_boolean,QTI_SDI_BUILD))
+$(eval $(call add_define,QTI_SDI_BUILD))
+
+#disable CTX_INCLUDE_AARCH32_REGS to support sc7280 gold cores
+override CTX_INCLUDE_AARCH32_REGS	:=	0
+WORKAROUND_CVE_2017_5715		:=      0
+DYNAMIC_WORKAROUND_CVE_2018_3639	:=      1
+# Enable stack protector.
+ENABLE_STACK_PROTECTOR := strong
+
+
+QTI_EXTERNAL_INCLUDES	:=	-I${QTI_PLAT_PATH}/${CHIPSET}/inc			\
+				-I${QTI_PLAT_PATH}/common/inc				\
+				-I${QTI_PLAT_PATH}/common/inc/$(ARCH)			\
+				-I${QTI_PLAT_PATH}/qtiseclib/inc			\
+				-I${QTI_PLAT_PATH}/qtiseclib/inc/${CHIPSET}			\
+
+QTI_BL31_SOURCES	:=	$(QTI_PLAT_PATH)/common/src/$(ARCH)/qti_helpers.S	\
+				$(QTI_PLAT_PATH)/common/src/$(ARCH)/qti_kryo6_silver.S	\
+				$(QTI_PLAT_PATH)/common/src/$(ARCH)/qti_kryo6_gold.S	\
+				$(QTI_PLAT_PATH)/common/src/$(ARCH)/qti_uart_console.S	\
+				$(QTI_PLAT_PATH)/common/src/pm8998.c			\
+				$(QTI_PLAT_PATH)/common/src/qti_stack_protector.c	\
+				$(QTI_PLAT_PATH)/common/src/qti_common.c		\
+				$(QTI_PLAT_PATH)/common/src/qti_bl31_setup.c		\
+				$(QTI_PLAT_PATH)/common/src/qti_gic_v3.c		\
+				$(QTI_PLAT_PATH)/common/src/qti_interrupt_svc.c		\
+				$(QTI_PLAT_PATH)/common/src/qti_syscall.c		\
+				$(QTI_PLAT_PATH)/common/src/qti_topology.c		\
+				$(QTI_PLAT_PATH)/common/src/qti_pm.c			\
+				$(QTI_PLAT_PATH)/common/src/qti_rng.c			\
+				$(QTI_PLAT_PATH)/common/src/spmi_arb.c			\
+				$(QTI_PLAT_PATH)/qtiseclib/src/qtiseclib_cb_interface.c	\
+
+
+PLAT_INCLUDES		:=	-Iinclude/plat/common/					\
+
+PLAT_INCLUDES		+=	${QTI_EXTERNAL_INCLUDES}
+
+include lib/xlat_tables_v2/xlat_tables.mk
+PLAT_BL_COMMON_SOURCES	+=	${XLAT_TABLES_LIB_SRCS}					\
+				plat/common/aarch64/crash_console_helpers.S    \
+				common/desc_image_load.c			\
+				lib/bl_aux_params/bl_aux_params.c		\
+
+include lib/coreboot/coreboot.mk
+
+#PSCI Sources.
+PSCI_SOURCES		:=	plat/common/plat_psci_common.c				\
+
+# GIC-600 configuration
+GICV3_SUPPORT_GIC600	:=	1
+# Include GICv3 driver files
+include drivers/arm/gic/v3/gicv3.mk
+
+#Timer sources
+TIMER_SOURCES		:=	drivers/delay_timer/generic_delay_timer.c	\
+				drivers/delay_timer/delay_timer.c		\
+
+#GIC sources.
+GIC_SOURCES		:=	plat/common/plat_gicv3.c			\
+				${GICV3_SOURCES}				\
+
+BL31_SOURCES		+=	${QTI_BL31_SOURCES}					\
+				${PSCI_SOURCES}						\
+				${GIC_SOURCES}						\
+				${TIMER_SOURCES}					\
+
+LIB_QTI_PATH	:=	${QTI_PLAT_PATH}/qtiseclib/lib/${CHIPSET}
+
+
+# Override this on the command line to point to the qtiseclib library which
+# will be available in coreboot.org
+QTISECLIB_PATH ?=
+
+ifeq ($(QTISECLIB_PATH),)
+# if No lib then use stub implementation for qtiseclib interface
+$(warning QTISECLIB_PATH is not provided while building, using stub implementation. \
+		Please refer docs/plat/qti.rst for more details \
+		THIS FIRMWARE WILL NOT BOOT!)
+BL31_SOURCES	+=	plat/qti/qtiseclib/src/qtiseclib_interface_stub.c
+else
+# use library provided by QTISECLIB_PATH
+LDFLAGS += -L $(dir $(QTISECLIB_PATH))
+LDLIBS += -l$(patsubst lib%.a,%,$(notdir $(QTISECLIB_PATH)))
+endif
+