feat(plat/qti/sc7280): support for qti sc7280 plat
new qti platform sc7280 support addition
Signed-off-by: Saurabh Gorecha <sgorecha@codeaurora.org>
Change-Id: I3dd99d8744a6c313f7dfbbee7ae2cbd6f21656c1
diff --git a/plat/qti/sc7280/platform.mk b/plat/qti/sc7280/platform.mk
new file mode 100644
index 0000000..6e26781
--- /dev/null
+++ b/plat/qti/sc7280/platform.mk
@@ -0,0 +1,119 @@
+#
+# Copyright (c) 2017-2018, Arm Limited and Contributors. All rights reserved.
+# Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Make for SC7280 QTI platform.
+
+QTI_PLAT_PATH := plat/qti
+CHIPSET := ${PLAT}
+
+# Turn On Separate code & data.
+SEPARATE_CODE_AND_RODATA := 1
+USE_COHERENT_MEM := 1
+WARMBOOT_ENABLE_DCACHE_EARLY := 1
+
+# Disable the PSCI platform compatibility layer
+ENABLE_PLAT_COMPAT := 0
+
+# Enable PSCI v1.0 extended state ID format
+PSCI_EXTENDED_STATE_ID := 1
+ARM_RECOM_STATE_ID_ENC := 1
+
+COLD_BOOT_SINGLE_CPU := 1
+PROGRAMMABLE_RESET_ADDRESS := 1
+
+RESET_TO_BL31 := 0
+
+MULTI_CONSOLE_API := 1
+
+QTI_SDI_BUILD := 0
+$(eval $(call assert_boolean,QTI_SDI_BUILD))
+$(eval $(call add_define,QTI_SDI_BUILD))
+
+#disable CTX_INCLUDE_AARCH32_REGS to support sc7280 gold cores
+override CTX_INCLUDE_AARCH32_REGS := 0
+WORKAROUND_CVE_2017_5715 := 0
+DYNAMIC_WORKAROUND_CVE_2018_3639 := 1
+# Enable stack protector.
+ENABLE_STACK_PROTECTOR := strong
+
+
+QTI_EXTERNAL_INCLUDES := -I${QTI_PLAT_PATH}/${CHIPSET}/inc \
+ -I${QTI_PLAT_PATH}/common/inc \
+ -I${QTI_PLAT_PATH}/common/inc/$(ARCH) \
+ -I${QTI_PLAT_PATH}/qtiseclib/inc \
+ -I${QTI_PLAT_PATH}/qtiseclib/inc/${CHIPSET} \
+
+QTI_BL31_SOURCES := $(QTI_PLAT_PATH)/common/src/$(ARCH)/qti_helpers.S \
+ $(QTI_PLAT_PATH)/common/src/$(ARCH)/qti_kryo6_silver.S \
+ $(QTI_PLAT_PATH)/common/src/$(ARCH)/qti_kryo6_gold.S \
+ $(QTI_PLAT_PATH)/common/src/$(ARCH)/qti_uart_console.S \
+ $(QTI_PLAT_PATH)/common/src/pm8998.c \
+ $(QTI_PLAT_PATH)/common/src/qti_stack_protector.c \
+ $(QTI_PLAT_PATH)/common/src/qti_common.c \
+ $(QTI_PLAT_PATH)/common/src/qti_bl31_setup.c \
+ $(QTI_PLAT_PATH)/common/src/qti_gic_v3.c \
+ $(QTI_PLAT_PATH)/common/src/qti_interrupt_svc.c \
+ $(QTI_PLAT_PATH)/common/src/qti_syscall.c \
+ $(QTI_PLAT_PATH)/common/src/qti_topology.c \
+ $(QTI_PLAT_PATH)/common/src/qti_pm.c \
+ $(QTI_PLAT_PATH)/common/src/qti_rng.c \
+ $(QTI_PLAT_PATH)/common/src/spmi_arb.c \
+ $(QTI_PLAT_PATH)/qtiseclib/src/qtiseclib_cb_interface.c \
+
+
+PLAT_INCLUDES := -Iinclude/plat/common/ \
+
+PLAT_INCLUDES += ${QTI_EXTERNAL_INCLUDES}
+
+include lib/xlat_tables_v2/xlat_tables.mk
+PLAT_BL_COMMON_SOURCES += ${XLAT_TABLES_LIB_SRCS} \
+ plat/common/aarch64/crash_console_helpers.S \
+ common/desc_image_load.c \
+ lib/bl_aux_params/bl_aux_params.c \
+
+include lib/coreboot/coreboot.mk
+
+#PSCI Sources.
+PSCI_SOURCES := plat/common/plat_psci_common.c \
+
+# GIC-600 configuration
+GICV3_SUPPORT_GIC600 := 1
+# Include GICv3 driver files
+include drivers/arm/gic/v3/gicv3.mk
+
+#Timer sources
+TIMER_SOURCES := drivers/delay_timer/generic_delay_timer.c \
+ drivers/delay_timer/delay_timer.c \
+
+#GIC sources.
+GIC_SOURCES := plat/common/plat_gicv3.c \
+ ${GICV3_SOURCES} \
+
+BL31_SOURCES += ${QTI_BL31_SOURCES} \
+ ${PSCI_SOURCES} \
+ ${GIC_SOURCES} \
+ ${TIMER_SOURCES} \
+
+LIB_QTI_PATH := ${QTI_PLAT_PATH}/qtiseclib/lib/${CHIPSET}
+
+
+# Override this on the command line to point to the qtiseclib library which
+# will be available in coreboot.org
+QTISECLIB_PATH ?=
+
+ifeq ($(QTISECLIB_PATH),)
+# if No lib then use stub implementation for qtiseclib interface
+$(warning QTISECLIB_PATH is not provided while building, using stub implementation. \
+ Please refer docs/plat/qti.rst for more details \
+ THIS FIRMWARE WILL NOT BOOT!)
+BL31_SOURCES += plat/qti/qtiseclib/src/qtiseclib_interface_stub.c
+else
+# use library provided by QTISECLIB_PATH
+LDFLAGS += -L $(dir $(QTISECLIB_PATH))
+LDLIBS += -l$(patsubst lib%.a,%,$(notdir $(QTISECLIB_PATH)))
+endif
+