diff --git a/plat/qti/sc7280/inc/platform_def.h b/plat/qti/sc7280/inc/platform_def.h
new file mode 100644
index 0000000..660cb33
--- /dev/null
+++ b/plat/qti/sc7280/inc/platform_def.h
@@ -0,0 +1,194 @@
+/*
+ * Copyright (c) 2018, Arm Limited and Contributors. All rights reserved.
+ * Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+/* Enable the dynamic translation tables library. */
+#define PLAT_XLAT_TABLES_DYNAMIC	1
+
+#include <common_def.h>
+
+#include <qti_board_def.h>
+#include <qtiseclib_defs_plat.h>
+
+/*----------------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------------*/
+/*
+ * MPIDR_PRIMARY_CPU
+ * You just need to have the correct core_affinity_val i.e. [7:0]
+ * and cluster_affinity_val i.e. [15:8]
+ * the other bits will be ignored
+ */
+/*----------------------------------------------------------------------------*/
+#define MPIDR_PRIMARY_CPU	0x0000
+/*----------------------------------------------------------------------------*/
+
+#define QTI_PWR_LVL0		MPIDR_AFFLVL0
+#define QTI_PWR_LVL1		MPIDR_AFFLVL1
+#define QTI_PWR_LVL2		MPIDR_AFFLVL2
+#define QTI_PWR_LVL3		MPIDR_AFFLVL3
+
+/*
+ *  Macros for local power states encoded by State-ID field
+ *  within the power-state parameter.
+ */
+/* Local power state for power domains in Run state. */
+#define QTI_LOCAL_STATE_RUN	0
+/*
+ * Local power state for clock-gating. Valid only for CPU and not cluster power
+ * domains
+ */
+#define QTI_LOCAL_STATE_STB	1
+/*
+ * Local power state for retention. Valid for CPU and cluster power
+ * domains
+ */
+#define QTI_LOCAL_STATE_RET	2
+/*
+ * Local power state for OFF/power down. Valid for CPU, cluster, RSC and PDC
+ * power domains
+ */
+#define QTI_LOCAL_STATE_OFF	3
+/*
+ * Local power state for DEEPOFF/power rail down. Valid for CPU, cluster and RSC
+ * power domains
+ */
+#define QTI_LOCAL_STATE_DEEPOFF	4
+
+/*
+ * This macro defines the deepest retention state possible. A higher state
+ * id will represent an invalid or a power down state.
+ */
+#define PLAT_MAX_RET_STATE	QTI_LOCAL_STATE_RET
+
+/*
+ * This macro defines the deepest power down states possible. Any state ID
+ * higher than this is invalid.
+ */
+#define PLAT_MAX_OFF_STATE	QTI_LOCAL_STATE_DEEPOFF
+
+/******************************************************************************
+ * Required platform porting definitions common to all ARM standard platforms
+ *****************************************************************************/
+
+/*
+ * Platform specific page table and MMU setup constants.
+ */
+#define MAX_MMAP_REGIONS	(PLAT_QTI_MMAP_ENTRIES)
+
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ull << 36)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ull << 36)
+
+#define ARM_CACHE_WRITEBACK_SHIFT	6
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_GRANULE		(1 << ARM_CACHE_WRITEBACK_SHIFT)
+
+/*
+ * One cache line needed for bakery locks on ARM platforms
+ */
+#define PLAT_PERCPU_BAKERY_LOCK_SIZE	(1 * CACHE_WRITEBACK_GRANULE)
+
+/*----------------------------------------------------------------------------*/
+/* PSCI power domain topology definitions */
+/*----------------------------------------------------------------------------*/
+/* One domain each to represent RSC and PDC level */
+#define PLAT_PDC_COUNT			1
+#define PLAT_RSC_COUNT			1
+
+/* There is one top-level FCM cluster */
+#define PLAT_CLUSTER_COUNT		1
+
+/* No. of cores in the FCM cluster */
+#define PLAT_CLUSTER0_CORE_COUNT	8
+
+#define PLATFORM_CORE_COUNT		(PLAT_CLUSTER0_CORE_COUNT)
+
+#define PLAT_NUM_PWR_DOMAINS		(PLAT_PDC_COUNT +\
+					PLAT_RSC_COUNT	+\
+					PLAT_CLUSTER_COUNT	+\
+					PLATFORM_CORE_COUNT)
+
+#define PLAT_MAX_PWR_LVL		3
+
+/*****************************************************************************/
+/* Memory mapped Generic timer interfaces  */
+/*****************************************************************************/
+
+/*----------------------------------------------------------------------------*/
+/* GIC-600 constants */
+/*----------------------------------------------------------------------------*/
+#define BASE_GICD_BASE		0x17A00000
+#define BASE_GICR_BASE		0x17A60000
+#define BASE_GICC_BASE		0x0
+#define BASE_GICH_BASE		0x0
+#define BASE_GICV_BASE		0x0
+
+#define QTI_GICD_BASE		BASE_GICD_BASE
+#define QTI_GICR_BASE		BASE_GICR_BASE
+#define QTI_GICC_BASE		BASE_GICC_BASE
+
+/*----------------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------------*/
+/* UART related constants. */
+/*----------------------------------------------------------------------------*/
+/* BASE ADDRESS OF DIFFERENT REGISTER SPACES IN HW */
+#define GENI4_CFG				0x0
+#define GENI4_IMAGE_REGS			0x100
+#define GENI4_DATA				0x600
+
+/* COMMON STATUS/CONFIGURATION REGISTERS AND MASKS */
+#define GENI_STATUS_REG				(GENI4_CFG + 0x00000040)
+#define GENI_STATUS_M_GENI_CMD_ACTIVE_MASK	(0x1)
+#define UART_TX_TRANS_LEN_REG			(GENI4_IMAGE_REGS + 0x00000170)
+/* MASTER/TX ENGINE REGISTERS */
+#define GENI_M_CMD0_REG				(GENI4_DATA + 0x00000000)
+/* FIFO, STATUS REGISTERS AND MASKS */
+#define GENI_TX_FIFOn_REG			(GENI4_DATA + 0x00000100)
+
+#define GENI_M_CMD_TX				(0x08000000)
+
+/*----------------------------------------------------------------------------*/
+/* Device address space for mapping. Excluding starting 4K */
+/*----------------------------------------------------------------------------*/
+#define QTI_DEVICE_BASE				0x1000
+#define QTI_DEVICE_SIZE				(0x80000000 - QTI_DEVICE_BASE)
+
+/*******************************************************************************
+ * BL31 specific defines.
+ ******************************************************************************/
+/*
+ * Put BL31 at DDR as per memory map. BL31_BASE is calculated using the
+ * current BL31 debug size plus a little space for growth.
+ */
+#define BL31_LIMIT				(BL31_BASE + BL31_SIZE)
+
+/*----------------------------------------------------------------------------*/
+/* AOSS registers */
+/*----------------------------------------------------------------------------*/
+#define QTI_PS_HOLD_REG				0x0C264000
+/*----------------------------------------------------------------------------*/
+/* AOP CMD DB  address space for mapping */
+/*----------------------------------------------------------------------------*/
+#define QTI_AOP_CMD_DB_BASE			0x80860000
+#define QTI_AOP_CMD_DB_SIZE			0x00020000
+/*----------------------------------------------------------------------------*/
+/* SOC hw version register */
+/*----------------------------------------------------------------------------*/
+#define QTI_SOC_VERSION				U(0x7280)
+#define QTI_SOC_VERSION_MASK			U(0xFFFF)
+#define QTI_SOC_REVISION_REG			0x1FC8000
+#define QTI_SOC_REVISION_MASK			U(0xFFFF)
+/*----------------------------------------------------------------------------*/
+
+#endif /* PLATFORM_DEF_H */
diff --git a/plat/qti/sc7280/inc/qti_rng_io.h b/plat/qti/sc7280/inc/qti_rng_io.h
new file mode 100644
index 0000000..0f41fd6
--- /dev/null
+++ b/plat/qti/sc7280/inc/qti_rng_io.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef QTI_RNG_IO_H
+#define QTI_RNG_IO_H
+
+#define SEC_PRNG_STATUS			0x10D1004
+#define SEC_PRNG_STATUS_DATA_AVAIL_BMSK	0x1
+#define SEC_PRNG_DATA_OUT		0x10D1000
+
+
+#endif /* QTI_RNG_IO_H */
+
diff --git a/plat/qti/sc7280/inc/qti_secure_io_cfg.h b/plat/qti/sc7280/inc/qti_secure_io_cfg.h
new file mode 100644
index 0000000..058c5b5
--- /dev/null
+++ b/plat/qti/sc7280/inc/qti_secure_io_cfg.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef QTI_SECURE_IO_CFG_H
+#define QTI_SECURE_IO_CFG_H
+
+#include <stdint.h>
+
+/*
+ * List of peripheral/IO memory areas that are protected from
+ * non-secure world but not required to be secure.
+ */
+
+#define APPS_SMMU_TBU_PWR_STATUS		0x15002204
+#define APPS_SMMU_CUSTOM_CFG			0x15002300
+#define APPS_SMMU_STATS_SYNC_INV_TBU_ACK	0x150025DC
+#define APPS_SMMU_SAFE_SEC_CFG			0x15002648
+#define APPS_SMMU_MMU2QSS_AND_SAFE_WAIT_CNTR	0x15002670
+
+static const uintptr_t qti_secure_io_allowed_regs[] = {
+	APPS_SMMU_TBU_PWR_STATUS,
+	APPS_SMMU_CUSTOM_CFG,
+	APPS_SMMU_STATS_SYNC_INV_TBU_ACK,
+	APPS_SMMU_SAFE_SEC_CFG,
+	APPS_SMMU_MMU2QSS_AND_SAFE_WAIT_CNTR,
+};
+
+#endif /* QTI_SECURE_IO_CFG_H */