rockchip: move dt-coreboot uart distinction into param handling code
Rockchip platforms can be booted from either u-boot or coreboot.
So far the Coreboot-console was initizalized from a coreboot data struct
in the early_param2 callbacks and dt-based consoles with data from the
rockchip_get_uart_* functions.
But later code may also need this console information for example for
special suspend handling. To make this easy follow a suggestion from
Julius Werner and move the coreboot<->dt distinction into the
rockchip_get_uart_* functions, thus making correct data about the used
uart available to all Rockchip platform code at all times.
This includes a new rockchip_get_uart_clock as well, because while the
dt-platforms right now always just default the rate defined in a constant
Coreboot provides its own field for the clock rate and we don't want to
loose that information for the console init. Similarly the rk_uart_*
variables should move into the non-Coreboot code, to prevent them from
being marked as unused, which also requires the rk_get_uart_* functions
to move below the actual dt-parsing.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I278d595d2aa6c6864187fc8979a9fbff9814feac
diff --git a/plat/rockchip/common/params_setup.c b/plat/rockchip/common/params_setup.c
index 9e8ef40..8c2e5e9 100644
--- a/plat/rockchip/common/params_setup.c
+++ b/plat/rockchip/common/params_setup.c
@@ -26,18 +26,6 @@
static struct bl_aux_gpio_info suspend_gpio[10];
uint32_t suspend_gpio_cnt;
static struct bl_aux_rk_apio_info suspend_apio;
-static uint32_t rk_uart_base = PLAT_RK_UART_BASE;
-static uint32_t rk_uart_baudrate = PLAT_RK_UART_BAUDRATE;
-
-uint32_t rockchip_get_uart_base(void)
-{
- return rk_uart_base;
-}
-
-uint32_t rockchip_get_uart_baudrate(void)
-{
- return rk_uart_baudrate;
-}
#if COREBOOT
static int dt_process_fdt(u_register_t param_from_bl2)
@@ -45,6 +33,9 @@
return -ENODEV;
}
#else
+static uint32_t rk_uart_base = PLAT_RK_UART_BASE;
+static uint32_t rk_uart_baudrate = PLAT_RK_UART_BAUDRATE;
+static uint32_t rk_uart_clock = PLAT_RK_UART_CLOCK;
static uint8_t fdt_buffer[0x10000];
void *plat_get_fdt(void)
@@ -152,7 +143,34 @@
return 0;
}
+#endif
+
+uint32_t rockchip_get_uart_base(void)
+{
+#if COREBOOT
+ return coreboot_serial.baseaddr;
+#else
+ return rk_uart_base;
+#endif
+}
+
+uint32_t rockchip_get_uart_baudrate(void)
+{
+#if COREBOOT
+ return coreboot_serial.baud;
+#else
+ return rk_uart_baudrate;
+#endif
+}
+
+uint32_t rockchip_get_uart_clock(void)
+{
+#if COREBOOT
+ return coreboot_serial.input_hertz;
+#else
+ return rk_uart_clock;
#endif
+}
struct bl_aux_gpio_info *plat_get_rockchip_gpio_reset(void)
{