zynqmp: pm: Reimplement clock set parent EEMI API
Clock set parent EEMI API is reimplemented to use system-level clock
and pll EEMI APIs rather than direct MMIO read/write accesses to clock
and pll control registers.
Since linux still uses clock set parent API to set pre_src, post_src, div2
and bypass, in the implementation of pm_clock_set_parent() we need to
workaround this by distinguishing two cases:
1) if the given clock ID corresponds to a PLL-related clock ID (*_PRE_SRC,
*_POST_SRC, *_INT_MUX or *PLL clock IDs); or 2) given clock ID is truly
an on-chip clock.
For case 1) we'll map the call onto PLL set parameter EEMI API with the
respective parameter ID. Since clock set parent interface to EL1/2 receives
parent index (mux select value), the value is just passed to PMU.
Functions that appear to be unused after this change is made are removed.
Setting the parent of *PLL clocks, that actually model bypass, is not
possible. This is already ensured by the existing clock model having the
CLK_SET_RATE_NO_REPARENT flag. The API also doesn't allow changing the
bypass parent. Bypass is controlled only by the PMU firmware.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
diff --git a/plat/xilinx/zynqmp/pm_service/pm_api_clock.c b/plat/xilinx/zynqmp/pm_service/pm_api_clock.c
index 2e07779..ca2f452 100644
--- a/plat/xilinx/zynqmp/pm_service/pm_api_clock.c
+++ b/plat/xilinx/zynqmp/pm_service/pm_api_clock.c
@@ -2493,11 +2493,19 @@
* implemented by linux to system-level EEMI APIs
* @nid: PLL node ID
* @cid: PLL clock ID
+ * @pre_src: Pre-source PLL clock ID
+ * @post_src: Post-source PLL clock ID
+ * @div2: DIV2 PLL clock ID
+ * @bypass: PLL output clock ID that maps to bypass select output
* @mode: PLL mode currently set via IOCTL (PLL_FRAC_MODE/PLL_INT_MODE)
*/
struct pm_pll {
const enum pm_node_id nid;
const enum clock_id cid;
+ const enum clock_id pre_src;
+ const enum clock_id post_src;
+ const enum clock_id div2;
+ const enum clock_id bypass;
uint8_t mode;
};
@@ -2505,18 +2513,38 @@
{
.nid = NODE_IOPLL,
.cid = CLK_IOPLL_INT,
+ .pre_src = CLK_IOPLL_PRE_SRC,
+ .post_src = CLK_IOPLL_POST_SRC,
+ .div2 = CLK_IOPLL_INT_MUX,
+ .bypass = CLK_IOPLL,
}, {
.nid = NODE_RPLL,
.cid = CLK_RPLL_INT,
+ .pre_src = CLK_RPLL_PRE_SRC,
+ .post_src = CLK_RPLL_POST_SRC,
+ .div2 = CLK_RPLL_INT_MUX,
+ .bypass = CLK_RPLL,
}, {
.nid = NODE_APLL,
.cid = CLK_APLL_INT,
+ .pre_src = CLK_APLL_PRE_SRC,
+ .post_src = CLK_APLL_POST_SRC,
+ .div2 = CLK_APLL_INT_MUX,
+ .bypass = CLK_APLL,
}, {
.nid = NODE_VPLL,
.cid = CLK_VPLL_INT,
+ .pre_src = CLK_VPLL_PRE_SRC,
+ .post_src = CLK_VPLL_POST_SRC,
+ .div2 = CLK_VPLL_INT_MUX,
+ .bypass = CLK_VPLL,
}, {
.nid = NODE_DPLL,
.cid = CLK_DPLL_INT,
+ .pre_src = CLK_DPLL_PRE_SRC,
+ .post_src = CLK_DPLL_POST_SRC,
+ .div2 = CLK_DPLL_INT_MUX,
+ .bypass = CLK_DPLL,
},
};
@@ -2559,6 +2587,28 @@
}
/**
+ * pm_clock_get_pll_by_related_clk() - Get PLL structure by PLL-related clock ID
+ * @clock_id Clock ID
+ *
+ * @return Pointer to PLL structure if found, NULL otherwise
+ */
+struct pm_pll *pm_clock_get_pll_by_related_clk(enum clock_id clock_id)
+{
+ uint32_t i;
+
+ for (i = 0; i < ARRAY_SIZE(pm_plls); i++) {
+ if (pm_plls[i].pre_src == clock_id ||
+ pm_plls[i].post_src == clock_id ||
+ pm_plls[i].div2 == clock_id ||
+ pm_plls[i].bypass == clock_id) {
+ return &pm_plls[i];
+ }
+ }
+
+ return NULL;
+}
+
+/**
* pm_clock_pll_enable() - "Enable" the PLL clock (lock the PLL)
* @pll: PLL to be locked
*
@@ -2629,54 +2679,34 @@
}
/**
- * pm_api_clock_setparent - Set the clock parent for given id
- * @clock_id Id of the clock
- * @parent_idx parent index
+ * pm_clock_pll_set_parent - Set the clock parent for PLL-related clock id
+ * @pll Target PLL structure
+ * @clock_id Id of the clock
+ * @parent_index parent index (=mux select value)
*
- * This function is used by master to set parent for any clock.
+ * The whole clock-tree implementation relies on the fact that parent indexes
+ * match to the multiplexer select values. This function has to rely on that
+ * assumption as well => parent_index is actually the mux select value.
*
* Return: Returns status, either success or error+reason.
*/
-enum pm_ret_status pm_api_clock_setparent(unsigned int clock_id,
- unsigned int parent_idx)
+enum pm_ret_status pm_clock_pll_set_parent(struct pm_pll *pll,
+ enum clock_id clock_id,
+ unsigned int parent_index)
{
- enum pm_ret_status ret = PM_RET_SUCCESS;
- struct pm_clock_node *nodes;
- uint8_t num_nodes;
- unsigned int reg, val;
- int32_t *clk_parents;
- unsigned int i = 0;
- uint8_t offset = NA_SHIFT, width = NA_WIDTH;
-
- if (!pm_clock_valid(clock_id))
+ if (!pll)
return PM_RET_ERROR_ARGS;
-
- if (pm_clock_type(clock_id) != CLK_TYPE_OUTPUT)
- return PM_RET_ERROR_NOTSUPPORTED;
-
- clk_parents = *clocks[clock_id].parents;
+ if (pll->pre_src == clock_id)
+ return pm_pll_set_parameter(pll->nid, PM_PLL_PARAM_PRE_SRC,
+ parent_index);
+ if (pll->post_src == clock_id)
+ return pm_pll_set_parameter(pll->nid, PM_PLL_PARAM_POST_SRC,
+ parent_index);
+ if (pll->div2 == clock_id)
+ return pm_pll_set_parameter(pll->nid, PM_PLL_PARAM_DIV2,
+ parent_index);
- for (i = 0; i <= parent_idx; i++)
- if (clk_parents[i] == CLK_NA_PARENT)
- return PM_RET_ERROR_ARGS;
-
- nodes = *clocks[clock_id].nodes;
- num_nodes = clocks[clock_id].num_nodes;
- for (i = 0; i < num_nodes; i++) {
- if (nodes->type == TYPE_MUX) {
- offset = nodes->offset;
- width = nodes->width;
- }
- nodes++;
- }
- if (width == NA_WIDTH)
- return PM_RET_ERROR_NOTSUPPORTED;
-
- reg = clocks[clock_id].control_reg;
- val = parent_idx << offset;
- ret = pm_mmio_write(reg, BIT_MASK(offset, width), val);
-
- return ret;
+ return PM_RET_ERROR_ARGS;
}
/**
diff --git a/plat/xilinx/zynqmp/pm_service/pm_api_clock.h b/plat/xilinx/zynqmp/pm_service/pm_api_clock.h
index c599f59..c406bbd 100644
--- a/plat/xilinx/zynqmp/pm_service/pm_api_clock.h
+++ b/plat/xilinx/zynqmp/pm_service/pm_api_clock.h
@@ -276,6 +276,7 @@
struct pm_pll;
struct pm_pll *pm_clock_get_pll(enum clock_id clock_id);
+struct pm_pll *pm_clock_get_pll_by_related_clk(enum clock_id clock_id);
uint8_t pm_clock_has_div(unsigned int clock_id, enum pm_clock_div_id div_id);
enum pm_ret_status pm_api_clock_get_name(unsigned int clock_id, char *name);
@@ -300,8 +301,9 @@
enum pm_ret_status pm_clock_pll_disable(struct pm_pll *pll);
enum pm_ret_status pm_clock_pll_get_state(struct pm_pll *pll,
unsigned int *state);
-enum pm_ret_status pm_api_clock_setparent(unsigned int clock_id,
- unsigned int parent_idx);
+enum pm_ret_status pm_clock_pll_set_parent(struct pm_pll *pll,
+ enum clock_id clock_id,
+ unsigned int parent_index);
enum pm_ret_status pm_api_clock_getparent(unsigned int clock_id,
unsigned int *parent_idx);
enum pm_ret_status pm_clock_set_pll_mode(enum clock_id clock_id,
diff --git a/plat/xilinx/zynqmp/pm_service/pm_api_sys.c b/plat/xilinx/zynqmp/pm_service/pm_api_sys.c
index eb54bcb..3c10bdb 100644
--- a/plat/xilinx/zynqmp/pm_service/pm_api_sys.c
+++ b/plat/xilinx/zynqmp/pm_service/pm_api_sys.c
@@ -1082,16 +1082,32 @@
/**
* pm_clock_setparent - Set the clock parent for given id
* @clock_id: Id of the clock
- * @parent_id: parent id
+ * @parent_index: Index of the parent clock into clock's parents array
*
* This function is used by master to set parent for any clock.
*
* Return: Returns status, either success or error+reason.
*/
enum pm_ret_status pm_clock_setparent(unsigned int clock_id,
- unsigned int parent_id)
+ unsigned int parent_index)
{
- return pm_api_clock_setparent(clock_id, parent_id);
+ struct pm_pll *pll;
+ uint32_t payload[PAYLOAD_ARG_CNT];
+ enum pm_ret_status status;
+
+ /* First try to handle it as a PLL */
+ pll = pm_clock_get_pll_by_related_clk(clock_id);
+ if (pll)
+ return pm_clock_pll_set_parent(pll, clock_id, parent_index);
+
+ /* Check if clock ID is a valid on-chip clock */
+ status = pm_clock_id_is_valid(clock_id);
+ if (status != PM_RET_SUCCESS)
+ return status;
+
+ /* Send request to the PMU */
+ PM_PACK_PAYLOAD3(payload, PM_CLOCK_SETPARENT, clock_id, parent_index);
+ return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
}
/**