fix(fvp): work around BL31 progbits exceeded
It is useful to have a single build for the FVP that includes as much
stuff as possible. Such a build allows a single TF-A build to be used on
a wide variety of fvp command lines. Unfortunately, the fvp also has a
(somewhat arbitrary) SRAM limit and enabling a bunch of stuff overruns
what is available.
To workaround this limit, don't enable everything for all
configurations. The offending configuration is when tsp is enabled, so
try to slim the binary down only when building with it.
As this doesn't solve the issue of running out of space for BL31, update
the linker error to give some clue as to what has (likely) caused it
while more permanent fixes are found.
Also add FEAT_RNG to the mix as it got missed in the commotion.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: Icb27cc837c2d90ca182693e9b3121b51383d51fd
diff --git a/bl31/bl31.ld.S b/bl31/bl31.ld.S
index c829058..5ac83fa 100644
--- a/bl31/bl31.ld.S
+++ b/bl31/bl31.ld.S
@@ -132,7 +132,10 @@
RELA_SECTION >RAM
#ifdef BL31_PROGBITS_LIMIT
- ASSERT(. <= BL31_PROGBITS_LIMIT, "BL31 progbits has exceeded its limit.")
+ ASSERT(
+ . <= BL31_PROGBITS_LIMIT,
+ "BL31 progbits has exceeded its limit. Consider disabling some features."
+ )
#endif /* BL31_PROGBITS_LIMIT */
#if SEPARATE_NOBITS_REGION
diff --git a/plat/arm/board/fvp/platform.mk b/plat/arm/board/fvp/platform.mk
index caac8d4..e5091c3 100644
--- a/plat/arm/board/fvp/platform.mk
+++ b/plat/arm/board/fvp/platform.mk
@@ -24,6 +24,57 @@
FVP_DT_PREFIX := fvp-base-gicv3-psci
+# This is a very trickly TEMPORARY fix. Enabling ALL features exceeds BL31's
+# progbits limit. We need a way to build all useful configurations while waiting
+# on the fvp to increase its SRAM size. The problem is twofild:
+# 1. the cleanup that introduced these enables cleaned up tf-a a little too
+# well and things that previously (incorrectly) were enabled, no longer are.
+# A bunch of CI configs build subtly incorrectly and this combo makes it
+# necessary to forcefully and unconditionally enable them here.
+# 2. the progbits limit is exceeded only when the tsp is involved. However,
+# there are tsp CI configs that run on very high architecture revisions so
+# disabling everything isn't an option.
+# The fix is to enable everything, as before. When the tsp is included, though,
+# we need to slim the size down. In that case, disable all optional features,
+# that will not be present in CI when the tsp is.
+# TODO: make all of this unconditional (or only base the condition on
+# ARM_ARCH_* when the makefile supports it).
+ifneq (${SPD}, tspd)
+ ENABLE_FEAT_AMU := 2
+ ENABLE_FEAT_AMUv1p1 := 2
+ ENABLE_FEAT_HCX := 2
+ ENABLE_MPAM_FOR_LOWER_ELS := 2
+ ENABLE_FEAT_RNG := 2
+ ENABLE_FEAT_TWED := 2
+ifeq (${ARCH},aarch64)
+ifeq (${SPM_MM}, 0)
+ifeq (${ENABLE_RME}, 0)
+ifeq (${CTX_INCLUDE_FPREGS}, 0)
+ ENABLE_SME_FOR_NS := 2
+endif
+endif
+endif
+endif
+endif
+
+# enable unconditionally for all builds
+ifeq (${ARCH}, aarch64)
+ifeq (${ENABLE_RME},0)
+ ENABLE_BRBE_FOR_NS := 2
+endif
+endif
+ENABLE_TRBE_FOR_NS := 2
+ENABLE_SYS_REG_TRACE_FOR_NS := 2
+ENABLE_FEAT_CSV2_2 := 2
+ENABLE_FEAT_PAN := 2
+ENABLE_FEAT_VHE := 2
+CTX_INCLUDE_NEVE_REGS := 2
+ENABLE_FEAT_SEL2 := 2
+ENABLE_TRF_FOR_NS := 2
+ENABLE_FEAT_ECV := 2
+ENABLE_FEAT_FGT := 2
+ENABLE_FEAT_TCR2 := 2
+
# The FVP platform depends on this macro to build with correct GIC driver.
$(eval $(call add_define,FVP_USE_GIC_DRIVER))
@@ -318,10 +369,6 @@
$(eval $(call TOOL_ADD_PAYLOAD,${FVP_HW_CONFIG},--hw-config,${FVP_HW_CONFIG}))
endif
-# Enable Activity Monitor Unit extensions by default
-ENABLE_FEAT_AMU := 2
-ENABLE_FEAT_AMUv1p1 := 2
-
# Enable dynamic mitigation support by default
DYNAMIC_WORKAROUND_CVE_2018_3639 := 1
@@ -447,49 +494,6 @@
DYN_DISABLE_AUTH := 1
endif
-# enable trace buffer control registers access to NS by default
-ENABLE_TRBE_FOR_NS := 2
-
-# enable branch record buffer control registers access in NS by default
-# only enable for aarch64
-# do not enable when ENABLE_RME=1
-ifeq (${ARCH}, aarch64)
-ifeq (${ENABLE_RME},0)
- ENABLE_BRBE_FOR_NS := 2
-endif
-endif
-
-# enable trace system registers access to NS by default
-ENABLE_SYS_REG_TRACE_FOR_NS := 2
-
-# enable trace filter control registers access to NS by default
-ENABLE_TRF_FOR_NS := 2
-
-# Linux relies on EL3 enablement if those features are present
-ENABLE_FEAT_FGT := 2
-ENABLE_FEAT_HCX := 2
-ENABLE_FEAT_TCR2 := 2
-
-CTX_INCLUDE_NEVE_REGS := 2
-ENABLE_FEAT_CSV2_2 := 2
-ENABLE_FEAT_ECV := 2
-ENABLE_FEAT_PAN := 2
-ENABLE_FEAT_SEL2 := 2
-ENABLE_FEAT_TWED := 2
-ENABLE_FEAT_VHE := 2
-ENABLE_MPAM_FOR_LOWER_ELS := 2
-
-# Enable SME access to NS by default
-ifeq (${ARCH},aarch64)
-ifeq (${SPM_MM}, 0)
-ifeq (${ENABLE_RME}, 0)
-ifeq (${CTX_INCLUDE_FPREGS}, 0)
- ENABLE_SME_FOR_NS := 2
-endif
-endif
-endif
-endif
-
ifeq (${SPMC_AT_EL3}, 1)
PLAT_BL_COMMON_SOURCES += plat/arm/board/fvp/fvp_el3_spmc.c
endif