diff --git a/plat/arm/board/fvp_r/fvp_r_bl1_arch_setup.c b/plat/arm/board/fvp_r/fvp_r_bl1_arch_setup.c
new file mode 100644
index 0000000..ae6af6c
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_bl1_arch_setup.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "../../../../bl1/bl1_private.h"
+#include <arch.h>
+
+#include <fvp_r_arch_helpers.h>
+
+/*******************************************************************************
+ * Function that does the first bit of architectural setup that affects
+ * execution in the non-secure address space.
+ ******************************************************************************/
+void bl1_arch_setup(void)
+{
+	/* v8-R64 does not include SCRs. */
+}
+
+/*******************************************************************************
+ * Set the Secure EL1 required architectural state
+ ******************************************************************************/
+void bl1_arch_next_el_setup(void)
+{
+	u_register_t next_sctlr;
+
+	/* Use the same endianness than the current BL */
+	next_sctlr = (read_sctlr_el2() & SCTLR_EE_BIT);
+
+	/* Set SCTLR Secure EL1 */
+	next_sctlr |= SCTLR_EL1_RES1;
+
+	write_sctlr_el1(next_sctlr);
+}
diff --git a/plat/arm/board/fvp_r/fvp_r_bl1_context_mgmt.c b/plat/arm/board/fvp_r/fvp_r_bl1_context_mgmt.c
new file mode 100644
index 0000000..1a18517
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_bl1_context_mgmt.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include "../../../../bl1/bl1_private.h"
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <context.h>
+#include <lib/el3_runtime/context_mgmt.h>
+
+#include <plat/common/platform.h>
+
+
+void cm_prepare_el2_exit(uint32_t security_state);
+
+/* Following contains the cpu context pointers. */
+static void *bl1_cpu_context_ptr[2];
+
+void *cm_get_context(uint32_t security_state)
+{
+	assert(sec_state_is_valid(security_state));
+	return bl1_cpu_context_ptr[security_state];
+}
+
+void cm_set_context(void *context, uint32_t security_state)
+{
+	assert(sec_state_is_valid(security_state));
+	bl1_cpu_context_ptr[security_state] = context;
+}
+
+/*******************************************************************************
+ * This function prepares the context for Secure/Normal world images.
+ * Normal world images are transitioned to EL2(if supported) else EL1.
+ ******************************************************************************/
+void bl1_prepare_next_image(unsigned int image_id)
+{
+	/*
+	 * Following array will be used for context management.
+	 * There are 2 instances, for the Secure and Non-Secure contexts.
+	 */
+	static cpu_context_t bl1_cpu_context[2];
+
+	unsigned int security_state, mode = MODE_EL1;
+	image_desc_t *desc;
+	entry_point_info_t *next_bl_ep;
+
+#if CTX_INCLUDE_AARCH32_REGS
+	/*
+	 * Ensure that the build flag to save AArch32 system registers in CPU
+	 * context is not set for AArch64-only platforms.
+	 */
+	if (el_implemented(1) == EL_IMPL_A64ONLY) {
+		ERROR("EL1 supports AArch64-only. Please set build flag %s",
+				"CTX_INCLUDE_AARCH32_REGS = 0\n");
+		panic();
+	}
+#endif
+
+	/* Get the image descriptor. */
+	desc = bl1_plat_get_image_desc(image_id);
+	assert(desc != NULL);
+
+	/* Get the entry point info. */
+	next_bl_ep = &desc->ep_info;
+
+	/* Get the image security state. */
+	security_state = GET_SECURITY_STATE(next_bl_ep->h.attr);
+
+	/* Setup the Secure/Non-Secure context if not done already. */
+	if (cm_get_context(security_state) == NULL) {
+		cm_set_context(&bl1_cpu_context[security_state], security_state);
+	}
+	/* Prepare the SPSR for the next BL image. */
+	if ((security_state != SECURE) && (el_implemented(2) != EL_IMPL_NONE)) {
+		mode = MODE_EL2;
+	}
+
+	next_bl_ep->spsr = (uint32_t)SPSR_64((uint64_t) mode,
+		(uint64_t)MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+
+	/* Allow platform to make change */
+	bl1_plat_set_ep_info(image_id, next_bl_ep);
+
+	/* Prepare the context for the next BL image. */
+	cm_init_my_context(next_bl_ep);
+	cm_prepare_el2_exit(security_state);
+
+	/* Indicate that image is in execution state. */
+	desc->state = IMAGE_STATE_EXECUTED;
+
+	print_entry_point_info(next_bl_ep);
+}
diff --git a/plat/arm/board/fvp_r/fvp_r_bl1_entrypoint.S b/plat/arm/board/fvp_r/fvp_r_bl1_entrypoint.S
new file mode 100644
index 0000000..d2e8ac8
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_bl1_entrypoint.S
@@ -0,0 +1,70 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <el2_common_macros.S>
+
+	.globl	bl1_entrypoint
+
+
+	/* -----------------------------------------------------
+	 * bl1_entrypoint() is the entry point into the trusted
+	 * firmware code when a cpu is released from warm or
+	 * cold reset.
+	 * -----------------------------------------------------
+	 */
+
+func bl1_entrypoint
+	/* ---------------------------------------------------------------------
+	 * If the reset address is programmable then bl1_entrypoint() is
+	 * executed only on the cold boot path. Therefore, we can skip the warm
+	 * boot mailbox mechanism.
+	 * ---------------------------------------------------------------------
+	 */
+	el2_entrypoint_common					\
+		_init_sctlr=1					\
+		_warm_boot_mailbox=!PROGRAMMABLE_RESET_ADDRESS	\
+		_secondary_cold_boot=!COLD_BOOT_SINGLE_CPU	\
+		_init_memory=1					\
+		_init_c_runtime=1				\
+		_exception_vectors=bl1_exceptions		\
+		_pie_fixup_size=0
+
+	/* --------------------------------------------------------------------
+	 * Perform BL1 setup
+	 * --------------------------------------------------------------------
+	 */
+	bl	bl1_setup
+
+#if ENABLE_PAUTH
+	/* --------------------------------------------------------------------
+	 * Program APIAKey_EL1 and enable pointer authentication.
+	 * --------------------------------------------------------------------
+	 */
+	bl	pauth_init_enable_el2
+#endif /* ENABLE_PAUTH */
+
+	/* --------------------------------------------------------------------
+	 * Initialize platform and jump to our c-entry point
+	 * for this type of reset.
+	 * --------------------------------------------------------------------
+	 */
+	bl	bl1_main
+
+#if ENABLE_PAUTH
+	/* --------------------------------------------------------------------
+	 * Disable pointer authentication before jumping to next boot image.
+	 * --------------------------------------------------------------------
+	 */
+	bl	pauth_disable_el2
+#endif /* ENABLE_PAUTH */
+
+	/* --------------------------------------------------
+	 * Do the transition to next boot image.
+	 * --------------------------------------------------
+	 */
+	b	el2_exit
+endfunc bl1_entrypoint
diff --git a/plat/arm/board/fvp_r/fvp_r_bl1_exceptions.S b/plat/arm/board/fvp_r/fvp_r_bl1_exceptions.S
new file mode 100644
index 0000000..43c2e01
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_bl1_exceptions.S
@@ -0,0 +1,120 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <bl1/bl1.h>
+#include <common/bl_common.h>
+#include <context.h>
+
+/* -----------------------------------------------------------------------------
+ * File contains an EL2 equivalent of the EL3 vector table from:
+ * 	.../bl1/aarch64/bl1_exceptions.S
+ * -----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------
+ * Very simple stackless exception handlers used by BL1.
+ * -----------------------------------------------------------------------------
+ */
+	.globl	bl1_exceptions
+
+vector_base bl1_exceptions
+
+	/* -----------------------------------------------------
+	 * Current EL with SP0 : 0x0 - 0x200
+	 * -----------------------------------------------------
+	 */
+vector_entry SynchronousExceptionSP0
+	mov	x0, #SYNC_EXCEPTION_SP_EL0
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry SynchronousExceptionSP0
+
+vector_entry IrqSP0
+	mov	x0, #IRQ_SP_EL0
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry IrqSP0
+
+vector_entry FiqSP0
+	mov	x0, #FIQ_SP_EL0
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry FiqSP0
+
+vector_entry SErrorSP0
+	mov	x0, #SERROR_SP_EL0
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry SErrorSP0
+
+	/* -----------------------------------------------------
+	 * Current EL with SPx: 0x200 - 0x400
+	 * -----------------------------------------------------
+	 */
+vector_entry SynchronousExceptionSPx
+	mov	x0, #SYNC_EXCEPTION_SP_ELX
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry SynchronousExceptionSPx
+
+vector_entry IrqSPx
+	mov	x0, #IRQ_SP_ELX
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry IrqSPx
+
+vector_entry FiqSPx
+	mov	x0, #FIQ_SP_ELX
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry FiqSPx
+
+vector_entry SErrorSPx
+	mov	x0, #SERROR_SP_ELX
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry SErrorSPx
+
+	/* -----------------------------------------------------
+	 * Lower EL using AArch64 : 0x400 - 0x600
+	 * -----------------------------------------------------
+	 */
+vector_entry SynchronousExceptionA64
+	/* The current v8-R64 implementation does not support conduit calls */
+	b	el2_panic
+end_vector_entry SynchronousExceptionA64
+
+vector_entry IrqA64
+	mov	x0, #IRQ_AARCH64
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry IrqA64
+
+vector_entry FiqA64
+	mov	x0, #FIQ_AARCH64
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry FiqA64
+
+vector_entry SErrorA64
+	mov	x0, #SERROR_AARCH64
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry SErrorA64
+
+
+unexpected_sync_exception:
+	mov	x0, #SYNC_EXCEPTION_AARCH64
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+
+	/* -----------------------------------------------------
+	 * Save Secure/Normal world context and jump to
+	 * BL1 SMC handler.
+	 * -----------------------------------------------------
+	 */
diff --git a/plat/arm/board/fvp_r/fvp_r_bl1_main.c b/plat/arm/board/fvp_r/fvp_r_bl1_main.c
new file mode 100644
index 0000000..b13ce9f
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_bl1_main.c
@@ -0,0 +1,213 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include "../../../../bl1/bl1_private.h"
+#include <arch.h>
+#include <arch_features.h>
+#include <arch_helpers.h>
+#include <bl1/bl1.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <drivers/auth/auth_mod.h>
+#include <drivers/console.h>
+#include <lib/cpus/errata_report.h>
+#include <lib/utils.h>
+#include <smccc_helpers.h>
+#include <tools_share/uuid.h>
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+
+
+static void bl1_load_bl2(void);
+
+#if ENABLE_PAUTH
+uint64_t bl1_apiakey[2];
+#endif
+
+/*******************************************************************************
+ * Helper utility to calculate the BL2 memory layout taking into consideration
+ * the BL1 RW data assuming that it is at the top of the memory layout.
+ ******************************************************************************/
+void bl1_calc_bl2_mem_layout(const meminfo_t *bl1_mem_layout,
+			meminfo_t *bl2_mem_layout)
+{
+	assert(bl1_mem_layout != NULL);
+	assert(bl2_mem_layout != NULL);
+
+	/*
+	 * Remove BL1 RW data from the scope of memory visible to BL2.
+	 * This is assuming BL1 RW data is at the top of bl1_mem_layout.
+	 */
+	assert(bl1_mem_layout->total_base < BL1_RW_BASE);
+	bl2_mem_layout->total_base = bl1_mem_layout->total_base;
+	bl2_mem_layout->total_size = BL1_RW_BASE - bl1_mem_layout->total_base;
+
+	flush_dcache_range((uintptr_t)bl2_mem_layout, sizeof(meminfo_t));
+}
+
+/*******************************************************************************
+ * Setup function for BL1.
+ ******************************************************************************/
+void bl1_setup(void)
+{
+	/* Perform early platform-specific setup */
+	bl1_early_platform_setup();
+
+	/* Perform late platform-specific setup */
+	bl1_plat_arch_setup();
+
+#if CTX_INCLUDE_PAUTH_REGS
+	/*
+	 * Assert that the ARMv8.3-PAuth registers are present or an access
+	 * fault will be triggered when they are being saved or restored.
+	 */
+	assert(is_armv8_3_pauth_present());
+#endif /* CTX_INCLUDE_PAUTH_REGS */
+}
+
+/*******************************************************************************
+ * Function to perform late architectural and platform specific initialization.
+ * It also queries the platform to load and run next BL image. Only called
+ * by the primary cpu after a cold boot.
+ ******************************************************************************/
+void bl1_main(void)
+{
+	unsigned int image_id;
+
+	/* Announce our arrival */
+	NOTICE(FIRMWARE_WELCOME_STR);
+	NOTICE("BL1: %s\n", version_string);
+	NOTICE("BL1: %s\n", build_message);
+
+	INFO("BL1: RAM %p - %p\n", (void *)BL1_RAM_BASE, (void *)BL1_RAM_LIMIT);
+
+	print_errata_status();
+
+#if ENABLE_ASSERTIONS
+	u_register_t val;
+	/*
+	 * Ensure that MMU/Caches and coherency are turned on
+	 */
+	val = read_sctlr_el2();
+
+	assert((val & SCTLR_M_BIT) != 0U);
+	assert((val & SCTLR_C_BIT) != 0U);
+	assert((val & SCTLR_I_BIT) != 0U);
+	/*
+	 * Check that Cache Writeback Granule (CWG) in CTR_EL0 matches the
+	 * provided platform value
+	 */
+	val = (read_ctr_el0() >> CTR_CWG_SHIFT) & CTR_CWG_MASK;
+	/*
+	 * If CWG is zero, then no CWG information is available but we can
+	 * at least check the platform value is less than the architectural
+	 * maximum.
+	 */
+	if (val != 0) {
+		assert(SIZE_FROM_LOG2_WORDS(val) == CACHE_WRITEBACK_GRANULE);
+	} else {
+		assert(CACHE_WRITEBACK_GRANULE <= MAX_CACHE_LINE_SIZE);
+	}
+#endif /* ENABLE_ASSERTIONS */
+
+	/* Perform remaining generic architectural setup from EL2 */
+	bl1_arch_setup();
+
+#if TRUSTED_BOARD_BOOT
+	/* Initialize authentication module */
+	auth_mod_init();
+#endif /* TRUSTED_BOARD_BOOT */
+
+	/* Perform platform setup in BL1. */
+	bl1_platform_setup();
+
+#if ENABLE_PAUTH
+	/* Store APIAKey_EL1 key */
+	bl1_apiakey[0] = read_apiakeylo_el1();
+	bl1_apiakey[1] = read_apiakeyhi_el1();
+#endif /* ENABLE_PAUTH */
+
+	/* Get the image id of next image to load and run. */
+	image_id = bl1_plat_get_next_image_id();
+
+	/*
+	 * We currently interpret any image id other than
+	 * BL2_IMAGE_ID as the start of firmware update.
+	 */
+	if (image_id == BL2_IMAGE_ID) {
+		bl1_load_bl2();
+	} else {
+		NOTICE("BL1-FWU: *******FWU Process Started*******\n");
+	}
+	bl1_prepare_next_image(image_id);
+
+	console_flush();
+}
+
+/*******************************************************************************
+ * This function locates and loads the BL2 raw binary image in the trusted SRAM.
+ * Called by the primary cpu after a cold boot.
+ * TODO: Add support for alternative image load mechanism e.g using virtio/elf
+ * loader etc.
+ ******************************************************************************/
+static void bl1_load_bl2(void)
+{
+	image_desc_t *desc;
+	image_info_t *info;
+	int err;
+
+	/* Get the image descriptor */
+	desc = bl1_plat_get_image_desc(BL2_IMAGE_ID);
+	assert(desc != NULL);
+
+	/* Get the image info */
+	info = &desc->image_info;
+	INFO("BL1: Loading BL2\n");
+
+	err = bl1_plat_handle_pre_image_load(BL2_IMAGE_ID);
+	if (err != 0) {
+		ERROR("Failure in pre image load handling of BL2 (%d)\n", err);
+		plat_error_handler(err);
+	}
+
+	err = load_auth_image(BL2_IMAGE_ID, info);
+	if (err != 0) {
+		ERROR("Failed to load BL2 firmware.\n");
+		plat_error_handler(err);
+	}
+
+	/* Allow platform to handle image information. */
+	err = bl1_plat_handle_post_image_load(BL2_IMAGE_ID);
+	if (err != 0) {
+		ERROR("Failure in post image load handling of BL2 (%d)\n", err);
+		plat_error_handler(err);
+	}
+
+	NOTICE("BL1: Booting BL2\n");
+}
+
+/*******************************************************************************
+ * Function called just before handing over to the next BL to inform the user
+ * about the boot progress. In debug mode, also print details about the BL
+ * image's execution context.
+ ******************************************************************************/
+void bl1_print_next_bl_ep_info(const entry_point_info_t *bl_ep_info)
+{
+	NOTICE("BL1: Booting BL31\n");
+	print_entry_point_info(bl_ep_info);
+}
+
+#if SPIN_ON_BL1_EXIT
+void print_debug_loop_message(void)
+{
+	NOTICE("BL1: Debug loop, spinning forever\n");
+	NOTICE("BL1: Please connect the debugger to continue\n");
+}
+#endif
+
diff --git a/plat/arm/board/fvp_r/fvp_r_bl1_setup.c b/plat/arm/board/fvp_r/fvp_r_bl1_setup.c
index 91709d8..c6fb25f 100644
--- a/plat/arm/board/fvp_r/fvp_r_bl1_setup.c
+++ b/plat/arm/board/fvp_r/fvp_r_bl1_setup.c
@@ -4,8 +4,12 @@
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
+/* Use the xlat_tables_v2 data structures: */
+#define XLAT_TABLES_LIB_V2	1
+
 #include <assert.h>
 
+#include "../../../../lib/xlat_mpu/xlat_mpu.h"
 #include <bl1/bl1.h>
 #include <common/tbbr/tbbr_img_def.h>
 #include <drivers/arm/sp805.h>
@@ -16,6 +20,56 @@
 #include <plat/arm/common/plat_arm.h>
 #include <plat/common/platform.h>
 
+#include <platform_def.h>
+
+#define MAP_BL1_TOTAL		MAP_REGION_FLAT(			\
+					bl1_tzram_layout.total_base,	\
+					bl1_tzram_layout.total_size,	\
+					MT_MEMORY | MT_RW | MT_SECURE)
+/*
+ * If SEPARATE_CODE_AND_RODATA=1 we define a region for each section
+ * otherwise one region is defined containing both
+ */
+#if SEPARATE_CODE_AND_RODATA
+#define MAP_BL1_RO		MAP_REGION_FLAT(			\
+					BL_CODE_BASE,			\
+					BL1_CODE_END - BL_CODE_BASE,	\
+					MT_CODE | MT_SECURE),		\
+				MAP_REGION_FLAT(			\
+					BL1_RO_DATA_BASE,		\
+					BL1_RO_DATA_END			\
+						- BL_RO_DATA_BASE,	\
+					MT_RO_DATA | MT_SECURE)
+#else
+#define MAP_BL1_RO		MAP_REGION_FLAT(			\
+					BL_CODE_BASE,			\
+					BL1_CODE_END - BL_CODE_BASE,	\
+					MT_CODE | MT_SECURE)
+#endif
+
+/* Data structure which holds the extents of the trusted SRAM for BL1*/
+static meminfo_t bl1_tzram_layout;
+
+struct meminfo *bl1_plat_sec_mem_layout(void)
+{
+	return &bl1_tzram_layout;
+}
+
+void arm_bl1_early_platform_setup(void)
+{
+
+#if !ARM_DISABLE_TRUSTED_WDOG
+	/* Enable watchdog */
+	plat_arm_secure_wdt_start();
+#endif
+
+	/* Initialize the console to provide early debug support */
+	arm_console_boot_init();
+
+	/* Allow BL1 to see the whole Trusted RAM */
+	bl1_tzram_layout.total_base = ARM_BL_RAM_BASE;
+	bl1_tzram_layout.total_size = ARM_BL_RAM_SIZE;
+}
 
 /*******************************************************************************
  * Perform any BL1 specific platform actions.
@@ -38,6 +92,34 @@
 	fvp_interconnect_enable();
 }
 
+void arm_bl1_plat_arch_setup(void)
+{
+	const mmap_region_t bl_regions[] = {
+		MAP_BL1_TOTAL,
+		MAP_BL1_RO,
+#if USE_ROMLIB
+		ARM_MAP_ROMLIB_CODE,
+		ARM_MAP_ROMLIB_DATA,
+#endif
+#if ARM_CRYPTOCELL_INTEG
+		ARM_MAP_BL_COHERENT_RAM,
+#endif
+		/* DRAM1_region: */
+		MAP_REGION_FLAT(					\
+			PLAT_ARM_DRAM1_BASE,				\
+			PLAT_ARM_DRAM1_SIZE,				\
+			MT_MEMORY | MT_SECURE | MT_EXECUTE		\
+			| MT_RW | MT_NON_CACHEABLE),
+		/* NULL terminator: */
+		{0}
+	};
+
+	setup_page_tables(bl_regions, plat_arm_get_mmap());
+	enable_mpu_el2(0);
+
+	arm_setup_romlib();
+}
+
 void plat_arm_secure_wdt_start(void)
 {
 	sp805_start(ARM_SP805_TWDG_BASE, ARM_TWDG_LOAD_VAL);
diff --git a/plat/arm/board/fvp_r/fvp_r_common.c b/plat/arm/board/fvp_r/fvp_r_common.c
index 693a6d7..a9316a1 100644
--- a/plat/arm/board/fvp_r/fvp_r_common.c
+++ b/plat/arm/board/fvp_r/fvp_r_common.c
@@ -4,9 +4,12 @@
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
-#include <assert.h>
+/* This uses xlat_mpu, but tables are set up using V2 mmap_region_t */
+#define XLAT_TABLES_LIB_V2	1
 
+#include <assert.h>
 #include <common/debug.h>
+
 #include <drivers/arm/cci.h>
 #include <drivers/arm/ccn.h>
 #include <drivers/arm/gicv2.h>
@@ -109,7 +112,80 @@
  ******************************************************************************/
 void __init fvp_config_setup(void)
 {
+	unsigned int rev, hbi, bld, arch, sys_id;
+
 	arm_config.flags |= ARM_CONFIG_BASE_MMAP;
+	sys_id = mmio_read_32(V2M_FVP_R_SYSREGS_BASE + V2M_SYS_ID);
+	rev = (sys_id >> V2M_SYS_ID_REV_SHIFT) & V2M_SYS_ID_REV_MASK;
+	hbi = (sys_id >> V2M_SYS_ID_HBI_SHIFT) & V2M_SYS_ID_HBI_MASK;
+	bld = (sys_id >> V2M_SYS_ID_BLD_SHIFT) & V2M_SYS_ID_BLD_MASK;
+	arch = (sys_id >> V2M_SYS_ID_ARCH_SHIFT) & V2M_SYS_ID_ARCH_MASK;
+
+	if (arch != ARCH_MODEL) {
+		ERROR("This firmware is for FVP_R models\n");
+		panic();
+	}
+
+	/*
+	 * The build field in the SYS_ID tells which variant of the GIC
+	 * memory is implemented by the model.
+	 */
+	switch (bld) {
+	case BLD_GIC_VE_MMAP:
+		ERROR("Legacy Versatile Express memory map for GIC %s",
+				"peripheral is not supported\n");
+		panic();
+		break;
+	case BLD_GIC_A53A57_MMAP:
+		break;
+	default:
+		ERROR("Unsupported board build %x\n", bld);
+		panic();
+	}
+
+	/*
+	 * The hbi field in the SYS_ID is 0x020 for the Base FVP_R & 0x010
+	 * for the Foundation FVP_R.
+	 */
+	switch (hbi) {
+	case HBI_FOUNDATION_FVP_R:
+		arm_config.flags = 0;
+
+		/*
+		 * Check for supported revisions of Foundation FVP_R
+		 * Allow future revisions to run but emit warning diagnostic
+		 */
+		switch (rev) {
+		case REV_FOUNDATION_FVP_R_V2_0:
+		case REV_FOUNDATION_FVP_R_V2_1:
+		case REV_FOUNDATION_FVP_R_v9_1:
+		case REV_FOUNDATION_FVP_R_v9_6:
+			break;
+		default:
+			WARN("Unrecognized Foundation FVP_R revision %x\n", rev);
+			break;
+		}
+		break;
+	case HBI_BASE_FVP_R:
+		arm_config.flags |= (ARM_CONFIG_BASE_MMAP | ARM_CONFIG_HAS_TZC);
+
+		/*
+		 * Check for supported revisions
+		 * Allow future revisions to run but emit warning diagnostic
+		 */
+		switch (rev) {
+		case REV_BASE_FVP_R_V0:
+			arm_config.flags |= ARM_CONFIG_FVP_HAS_CCI400;
+			break;
+		default:
+			WARN("Unrecognized Base FVP_R revision %x\n", rev);
+			break;
+		}
+		break;
+	default:
+		ERROR("Unsupported board HBI number 0x%x\n", hbi);
+		panic();
+	}
 
 	/*
 	 * We assume that the presence of MT bit, and therefore shifted
diff --git a/plat/arm/board/fvp_r/fvp_r_context.S b/plat/arm/board/fvp_r/fvp_r_context.S
new file mode 100644
index 0000000..2746c2e
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_context.S
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <asm_macros.S>
+
+	.global	el2_exit
+
+/* ------------------------------------------------------------------
+ * The mechanism, from el3_exit, is not used in this v8-R64 implementation.
+ * ------------------------------------------------------------------
+ */
+func el2_exit
+	exception_return
+endfunc el2_exit
diff --git a/plat/arm/board/fvp_r/fvp_r_context_mgmt.c b/plat/arm/board/fvp_r/fvp_r_context_mgmt.c
new file mode 100644
index 0000000..678b879
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_context_mgmt.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <lib/el3_runtime/context_mgmt.h>
+#include <lib/el3_runtime/pubsub_events.h>
+
+#include <platform_def.h>
+
+
+/*******************************************************************************
+ * File contains EL2 equivalents of EL3 functions from
+ * .../lib/el3_runtime/aarch64/context_mgmt.c
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Prepare the CPU system registers for first entry into secure or normal world
+ *
+ * The majority of the work needed is only for switching to non-secure, which
+ * is not available on v8-R64 cores, so this function is very simple.
+ ******************************************************************************/
+void cm_prepare_el2_exit(uint32_t security_state)
+{
+	cm_el1_sysregs_context_restore(security_state);
+	cm_set_next_eret_context(security_state);
+}
diff --git a/plat/arm/board/fvp_r/fvp_r_debug.S b/plat/arm/board/fvp_r/fvp_r_debug.S
new file mode 100644
index 0000000..8db1b09
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_debug.S
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <common/debug.h>
+
+	.globl el2_panic
+
+	/***********************************************************
+	 * The common implementation of do_panic for all BL stages
+	 ***********************************************************/
+
+.section .rodata.panic_str, "aS"
+	panic_msg: .asciz "PANIC at PC : 0x"
+
+/*
+ * el2_panic will be redefined by the
+ * crash reporting mechanism (if enabled)
+ */
+el2_panic:
+	mov	x6, x30
+	bl	plat_crash_console_init
+
+	/* Check if the console is initialized */
+	cbz	x0, _panic_handler
+
+	/* The console is initialized */
+	adr	x4, panic_msg
+	bl	asm_print_str
+	mov	x4, x6
+
+	/* The panic location is lr -4 */
+	sub	x4, x4, #4
+	bl	asm_print_hex
+
+	bl	plat_crash_console_flush
+
+_panic_handler:
+	/* Pass to plat_panic_handler the address from where el2_panic was
+	 * called, not the address of the call from el2_panic. */
+	mov	x30, x6
+	b	plat_panic_handler
diff --git a/plat/arm/board/fvp_r/fvp_r_def.h b/plat/arm/board/fvp_r/fvp_r_def.h
index 587832f..b9f6989 100644
--- a/plat/arm/board/fvp_r/fvp_r_def.h
+++ b/plat/arm/board/fvp_r/fvp_r_def.h
@@ -36,40 +36,44 @@
  * FVP_R memory map related constants
  ******************************************************************************/
 
-#define FLASH1_BASE			UL(0x0c000000)
+#define FLASH1_BASE			UL(0x8c000000)
 #define FLASH1_SIZE			UL(0x04000000)
 
-#define PSRAM_BASE			UL(0x14000000)
+#define PSRAM_BASE			UL(0x94000000)
 #define PSRAM_SIZE			UL(0x04000000)
 
-#define VRAM_BASE			UL(0x18000000)
+#define VRAM_BASE			UL(0x98000000)
 #define VRAM_SIZE			UL(0x02000000)
 
 /* Aggregate of all devices in the first GB */
-#define DEVICE0_BASE			UL(0x20000000)
+#define DEVICE0_BASE			UL(0xa0000000)
 #define DEVICE0_SIZE			UL(0x0c200000)
 
 /*
  *  In case of FVP_R models with CCN, the CCN register space overlaps into
  *  the NSRAM area.
  */
-#define DEVICE1_BASE			UL(0x2e000000)
+#define DEVICE1_BASE			UL(0xae000000)
 #define DEVICE1_SIZE			UL(0x1A00000)
-#define NSRAM_BASE			UL(0x2e000000)
+
+#define NSRAM_BASE			UL(0xae000000)
 #define NSRAM_SIZE			UL(0x10000)
 /* Devices in the second GB */
-#define DEVICE2_BASE			UL(0x7fe00000)
+#define DEVICE2_BASE			UL(0xffe00000)
 #define DEVICE2_SIZE			UL(0x00200000)
 
+#define PCIE_EXP_BASE			UL(0xc0000000)
+#define TZRNG_BASE			UL(0x7fe60000)
+
 /* Non-volatile counters */
-#define TRUSTED_NVCTR_BASE		UL(0x7fe70000)
+#define TRUSTED_NVCTR_BASE		UL(0xffe70000)
 #define TFW_NVCTR_BASE			(TRUSTED_NVCTR_BASE + UL(0x0000))
 #define TFW_NVCTR_SIZE			UL(4)
 #define NTFW_CTR_BASE			(TRUSTED_NVCTR_BASE + UL(0x0004))
 #define NTFW_CTR_SIZE			UL(4)
 
 /* Keys */
-#define SOC_KEYS_BASE			UL(0x7fe80000)
+#define SOC_KEYS_BASE			UL(0xffe80000)
 #define TZ_PUB_KEY_HASH_BASE		(SOC_KEYS_BASE + UL(0x0000))
 #define TZ_PUB_KEY_HASH_SIZE		UL(32)
 #define HU_KEY_BASE			(SOC_KEYS_BASE + UL(0x0020))
diff --git a/plat/arm/board/fvp_r/fvp_r_misc_helpers.S b/plat/arm/board/fvp_r/fvp_r_misc_helpers.S
new file mode 100644
index 0000000..67ad164
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_misc_helpers.S
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <asm_macros.S>
+
+	.globl	disable_mpu_el2
+	.globl	disable_mpu_icache_el2
+
+/* ---------------------------------------------------------------------------
+ * Disable the MPU at EL2.
+ * ---------------------------------------------------------------------------
+ */
+
+func disable_mpu_el2
+	mov	x1, #(SCTLR_M_BIT | SCTLR_C_BIT)
+do_disable_mpu_el2:
+	mrs	x0, sctlr_el2
+	bic	x0, x0, x1
+	msr	sctlr_el2, x0
+	isb	/* ensure MMU is off */
+	dsb	sy
+	ret
+endfunc disable_mpu_el2
+
+
+func disable_mpu_icache_el2
+	mov	x1, #(SCTLR_M_BIT | SCTLR_C_BIT | SCTLR_I_BIT)
+	b	do_disable_mpu_el2
+endfunc disable_mpu_icache_el2
diff --git a/plat/arm/board/fvp_r/fvp_r_pauth_helpers.S b/plat/arm/board/fvp_r/fvp_r_pauth_helpers.S
new file mode 100644
index 0000000..7e6bc3d
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_pauth_helpers.S
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <lib/el3_runtime/cpu_data.h>
+
+	.global	pauth_init_enable_el2
+	.global	pauth_disable_el2
+
+/* -------------------------------------------------------------
+ * File contains EL2 versions of EL3 funcs in:
+ * 	.../lib/extensions/pauth/pauth_helpers.S
+ * -------------------------------------------------------------
+ */
+
+/* -------------------------------------------------------------
+ * Program APIAKey_EL1 and enable pointer authentication in EL2
+ * -------------------------------------------------------------
+ */
+func pauth_init_enable_el2
+	stp	x29, x30, [sp, #-16]!
+
+	/* Initialize platform key */
+	bl	plat_init_apkey
+
+	/* Program instruction key A used by the Trusted Firmware */
+	msr	APIAKeyLo_EL1, x0
+	msr	APIAKeyHi_EL1, x1
+
+	/* Enable pointer authentication */
+	mrs	x0, sctlr_el2
+	orr	x0, x0, #SCTLR_EnIA_BIT
+
+#if ENABLE_BTI
+	 /* Enable PAC branch type compatibility */
+	bic	x0, x0, #SCTLR_BT_BIT
+#endif
+	msr	sctlr_el2, x0
+	isb
+
+	ldp	x29, x30, [sp], #16
+	ret
+endfunc pauth_init_enable_el2
+
+/* -------------------------------------------------------------
+ * Disable pointer authentication in EL2
+ * -------------------------------------------------------------
+ */
+func pauth_disable_el2
+	mrs	x0, sctlr_el2
+	bic	x0, x0, #SCTLR_EnIA_BIT
+	msr	sctlr_el2, x0
+	isb
+	ret
+endfunc pauth_disable_el2
diff --git a/plat/arm/board/fvp_r/fvp_r_stack_protector.c b/plat/arm/board/fvp_r/fvp_r_stack_protector.c
index 5922a98..69b6312 100644
--- a/plat/arm/board/fvp_r/fvp_r_stack_protector.c
+++ b/plat/arm/board/fvp_r/fvp_r_stack_protector.c
@@ -6,7 +6,7 @@
 
 #include <stdint.h>
 
-#include <arch_helpers.h>
+#include <fvp_r_arch_helpers.h>
 #include <plat/common/platform.h>
 
 #define RANDOM_CANARY_VALUE ((u_register_t) 8092347823957523895ULL)
diff --git a/plat/arm/board/fvp_r/fvp_r_trusted_boot.c b/plat/arm/board/fvp_r/fvp_r_trusted_boot.c
index f304e3e..de0b28f 100644
--- a/plat/arm/board/fvp_r/fvp_r_trusted_boot.c
+++ b/plat/arm/board/fvp_r/fvp_r_trusted_boot.c
@@ -22,13 +22,13 @@
  * Return the ROTPK hash in the following ASN.1 structure in DER format:
  *
  * AlgorithmIdentifier  ::=  SEQUENCE  {
- *     algorithm         OBJECT IDENTIFIER,
- *     parameters        ANY DEFINED BY algorithm OPTIONAL
+ *     algorithm	OBJECT IDENTIFIER,
+ *     parameters	ANY DEFINED BY algorithm OPTIONAL
  * }
  *
  * DigestInfo ::= SEQUENCE {
- *     digestAlgorithm   AlgorithmIdentifier,
- *     digest            OCTET STRING
+ *     digestAlgorithm	AlgorithmIdentifier,
+ *     digest		OCTET STRING
  * }
  */
 int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
diff --git a/plat/arm/board/fvp_r/include/fvp_r_arch_helpers.h b/plat/arm/board/fvp_r/include/fvp_r_arch_helpers.h
new file mode 100644
index 0000000..92bf484
--- /dev/null
+++ b/plat/arm/board/fvp_r/include/fvp_r_arch_helpers.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FVP_R_ARCH_HELPERS_H
+#define FVP_R_ARCH_HELPERS_H
+
+#include <arch_helpers.h>
+
+/*******************************************************************************
+ * MPU register definitions
+ ******************************************************************************/
+#define MPUIR_EL2		S3_4_C0_C0_4
+#define PRBAR_EL2		S3_4_C6_C8_0
+#define PRLAR_EL2		S3_4_C6_C8_1
+#define PRSELR_EL2		S3_4_C6_C2_1
+#define PRENR_EL2		S3_4_C6_C1_1
+
+/* v8-R64 MPU registers */
+DEFINE_RENAME_SYSREG_RW_FUNCS(mpuir_el2, MPUIR_EL2)
+DEFINE_RENAME_SYSREG_RW_FUNCS(prenr_el2, PRENR_EL2)
+DEFINE_RENAME_SYSREG_RW_FUNCS(prselr_el2, PRSELR_EL2)
+DEFINE_RENAME_SYSREG_RW_FUNCS(prbar_el2, PRBAR_EL2)
+DEFINE_RENAME_SYSREG_RW_FUNCS(prlar_el2, PRLAR_EL2)
+
+#endif /* FVP_R_ARCH_HELPERS_H */
diff --git a/plat/arm/board/fvp_r/include/platform_def.h b/plat/arm/board/fvp_r/include/platform_def.h
index 4586681..725d131 100644
--- a/plat/arm/board/fvp_r/include/platform_def.h
+++ b/plat/arm/board/fvp_r/include/platform_def.h
@@ -4,19 +4,37 @@
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
-#ifndef PLATFORM_DEF_H
-#define PLATFORM_DEF_H
+#ifndef FVP_R_PLATFORM_DEF_H
+#define FVP_R_PLATFORM_DEF_H
+
+#define PLAT_V2M_OFFSET			0x80000000
 
 #include "../fvp_r_def.h"
 #include <drivers/arm/tzc400.h>
 #include <lib/utils_def.h>
 #include <plat/arm/board/common/v2m_def.h>
 
+/* These are referenced by arm_def.h #included next, so #define first. */
+#define PLAT_ARM_TRUSTED_ROM_BASE	UL(0x80000000)
+#define PLAT_ARM_TRUSTED_SRAM_BASE	UL(0x84000000)
+#define PLAT_ARM_TRUSTED_DRAM_BASE	UL(0x86000000)
+#define PLAT_ARM_DRAM1_BASE		ULL(0x0)
+#define PLAT_ARM_DRAM2_BASE		ULL(0x080000000)
+
+#define PLAT_HW_CONFIG_DTB_BASE		ULL(0x12000000)
+#define PLAT_ARM_SYS_CNTCTL_BASE	UL(0xaa430000)
+#define PLAT_ARM_SYS_CNTREAD_BASE	UL(0xaa800000)
+#define PLAT_ARM_SYS_TIMCTL_BASE	UL(0xaa810000)
+#define PLAT_ARM_SYS_CNT_BASE_S		UL(0xaa820000)
+#define PLAT_ARM_SYS_CNT_BASE_NS	UL(0xaa830000)
+#define PLAT_ARM_SP805_TWDG_BASE	UL(0xaa490000)
+
 #include <plat/arm/common/arm_def.h>
 #include <plat/common/common_def.h>
 
 
-#define NO_EL3				1
+/* Required to create plat_regions: */
+#define MIN_LVL_BLOCK_DESC	U(1)
 
 /* Required platform porting definitions */
 #define PLATFORM_CORE_COUNT  (U(FVP_R_CLUSTER_COUNT) * \
@@ -36,34 +54,35 @@
  * Required ARM standard platform porting definitions
  */
 #define PLAT_ARM_CLUSTER_COUNT		U(FVP_R_CLUSTER_COUNT)
-
-#define PLAT_ARM_DRAM1_BASE		ULL(0x0)
-
-#define PLAT_ARM_TRUSTED_ROM_BASE	UL(0x80000000)
-#define PLAT_ARM_TRUSTED_ROM_SIZE	UL(0x04000000)	/* 64 MB */
-
-#define PLAT_ARM_TRUSTED_SRAM_BASE	UL(0x84000000)
+#define PLAT_ARM_DRAM1_SIZE		ULL(0x7fffffff)
 #define PLAT_ARM_TRUSTED_SRAM_SIZE	UL(0x00040000)	/* 256 KB */
-
-#define PLAT_ARM_TRUSTED_DRAM_BASE	UL(0x86000000)
+#define PLAT_ARM_TRUSTED_ROM_SIZE	UL(0x04000000)	/* 64 MB */
 #define PLAT_ARM_TRUSTED_DRAM_SIZE	UL(0x02000000)	/* 32 MB */
 
+/* These two are defined thus in arm_def.h, but doesn't seem to see it... */
+#undef	BL1_RO_BASE
+#define	BL1_RO_BASE			PLAT_ARM_TRUSTED_ROM_BASE
+#undef	BL1_RO_LIMIT
+#define	BL1_RO_LIMIT			(BL1_RO_BASE \
+					+ PLAT_ARM_TRUSTED_ROM_SIZE)
+
 /* virtual address used by dynamic mem_protect for chunk_base */
 #define PLAT_ARM_MEM_PROTEC_VA_FRAME	UL(0xc0000000)
 
 /* No SCP in FVP_R */
 #define PLAT_ARM_SCP_TZC_DRAM1_SIZE	UL(0x0)
 
-#define PLAT_ARM_DRAM2_BASE		ULL(0x080000000)
 #define PLAT_ARM_DRAM2_SIZE		UL(0x80000000)
 
-#define PLAT_HW_CONFIG_DTB_BASE		ULL(0x12000000)
 #define PLAT_HW_CONFIG_DTB_SIZE		ULL(0x8000)
 
 #define ARM_DTB_DRAM_NS			MAP_REGION_FLAT(		\
 					PLAT_HW_CONFIG_DTB_BASE,	\
 					PLAT_HW_CONFIG_DTB_SIZE,	\
 					MT_MEMORY | MT_RO | MT_NS)
+
+#define V2M_FVP_R_SYSREGS_BASE		UL(0x9c010000)
+
 /*
  * Load address of BL33 for this platform port
  */
@@ -80,6 +99,9 @@
 # define PLAT_ARM_MMAP_ENTRIES		12
 # define MAX_XLAT_TABLES		6
 #endif
+# define N_MPU_REGIONS			16  /* number of MPU regions */
+# define ALL_MPU_EL2_REGIONS_USED	0xffffffff
+	/* this is the PRENR_EL2 value if all MPU regions are in use */
 
 /*
  * These nominally reserve the last block of flash for PSCI MEM PROTECT flag,
@@ -228,15 +250,10 @@
 /*
  * Physical and virtual address space limits for MPU in AARCH64 & AARCH32 modes
  */
-#ifdef __aarch64__
 #define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 36)
 #define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 36)
-#else
-#define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 32)
-#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 32)
-#endif
 
 #define ARM_SOC_CONTINUATION_SHIFT	U(24)
 #define ARM_SOC_IDENTIFICATION_SHIFT	U(16)
 
-#endif /* PLATFORM_DEF_H */
+#endif /* FVP_R_PLATFORM_DEF_H */
diff --git a/plat/arm/board/fvp_r/platform.mk b/plat/arm/board/fvp_r/platform.mk
index 1387ae7..a755432 100644
--- a/plat/arm/board/fvp_r/platform.mk
+++ b/plat/arm/board/fvp_r/platform.mk
@@ -22,6 +22,9 @@
 # Default number of threads per CPU on FVP_R
 FVP_R_MAX_PE_PER_CPU	:= 1
 
+# Use MPU-based memory management:
+XLAT_MPU_LIB_V1		:=	1
+
 # Need to revisit this for FVP_R
 FVP_R_DT_PREFIX		:= fvp-base-gicv3-psci
 
@@ -76,10 +79,20 @@
 				drivers/io/io_semihosting.c			\
 				lib/semihosting/semihosting.c			\
 				lib/semihosting/${ARCH}/semihosting_call.S	\
-				plat/arm/board/fvp_r/fvp_r_helpers.S		\
+				plat/arm/board/fvp_r/fvp_r_bl1_arch_setup.c	\
 				plat/arm/board/fvp_r/fvp_r_bl1_setup.c		\
+				plat/arm/board/fvp_r/fvp_r_context_mgmt.c	\
 				plat/arm/board/fvp_r/fvp_r_err.c		\
 				plat/arm/board/fvp_r/fvp_r_io_storage.c		\
+				plat/arm/board/fvp_r/fvp_r_bl1_context_mgmt.c	\
+				plat/arm/board/fvp_r/fvp_r_bl1_entrypoint.S	\
+				plat/arm/board/fvp_r/fvp_r_bl1_exceptions.S	\
+				plat/arm/board/fvp_r/fvp_r_bl1_main.c	\
+				plat/arm/board/fvp_r/fvp_r_context.S		\
+				plat/arm/board/fvp_r/fvp_r_debug.S		\
+				plat/arm/board/fvp_r/fvp_r_helpers.S		\
+				plat/arm/board/fvp_r/fvp_r_misc_helpers.S	\
+				plat/arm/board/fvp_r/fvp_r_pauth_helpers.S	\
 				${FVP_R_CPU_LIBS}				\
 				${FVP_R_INTERCONNECT_SOURCES}
 
@@ -96,9 +109,7 @@
 PLAT_BL_COMMON_SOURCES	+=	plat/arm/board/fvp_r/fvp_r_stack_protector.c
 endif
 
-ifeq (${ARCH},aarch32)
-    NEED_BL32 := yes
-endif
+NEED_BL32 := no
 
 ifneq (${BL2_AT_EL3}, 0)
     override BL1_SOURCES =