stm32mp1: use functions to retrieve some peripheral addresses
PWR, RCC, DDRPHYC & DDRCTRL addresses can be retrieved from device tree.
Platform asserts the value read from the DT are the SoC addresses.
Change-Id: I43f0890b51918a30c87ac067d3780ab27a0f59de
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
diff --git a/plat/st/stm32mp1/bl2_plat_setup.c b/plat/st/stm32mp1/bl2_plat_setup.c
index 69dc3fb..5ab20845 100644
--- a/plat/st/stm32mp1/bl2_plat_setup.c
+++ b/plat/st/stm32mp1/bl2_plat_setup.c
@@ -31,7 +31,7 @@
static void print_reset_reason(void)
{
- uint32_t rstsr = mmio_read_32(RCC_BASE + RCC_MP_RSTSCLRR);
+ uint32_t rstsr = mmio_read_32(stm32mp_rcc_base() + RCC_MP_RSTSCLRR);
if (rstsr == 0U) {
WARN("Reset reason unknown\n");
@@ -147,6 +147,8 @@
boot_api_context_t *boot_context =
(boot_api_context_t *)stm32mp_get_boot_ctx_address();
uint32_t clk_rate;
+ uintptr_t pwr_base;
+ uintptr_t rcc_base;
mmap_add_region(BL_CODE_BASE, BL_CODE_BASE,
BL_CODE_END - BL_CODE_BASE,
@@ -174,27 +176,30 @@
panic();
}
+ pwr_base = stm32mp_pwr_base();
+ rcc_base = stm32mp_rcc_base();
+
/*
* Disable the backup domain write protection.
* The protection is enable at each reset by hardware
* and must be disabled by software.
*/
- mmio_setbits_32(PWR_BASE + PWR_CR1, PWR_CR1_DBP);
+ mmio_setbits_32(pwr_base + PWR_CR1, PWR_CR1_DBP);
- while ((mmio_read_32(PWR_BASE + PWR_CR1) & PWR_CR1_DBP) == 0U) {
+ while ((mmio_read_32(pwr_base + PWR_CR1) & PWR_CR1_DBP) == 0U) {
;
}
/* Reset backup domain on cold boot cases */
- if ((mmio_read_32(RCC_BASE + RCC_BDCR) & RCC_BDCR_RTCSRC_MASK) == 0U) {
- mmio_setbits_32(RCC_BASE + RCC_BDCR, RCC_BDCR_VSWRST);
+ if ((mmio_read_32(rcc_base + RCC_BDCR) & RCC_BDCR_RTCSRC_MASK) == 0U) {
+ mmio_setbits_32(rcc_base + RCC_BDCR, RCC_BDCR_VSWRST);
- while ((mmio_read_32(RCC_BASE + RCC_BDCR) & RCC_BDCR_VSWRST) ==
+ while ((mmio_read_32(rcc_base + RCC_BDCR) & RCC_BDCR_VSWRST) ==
0U) {
;
}
- mmio_clrbits_32(RCC_BASE + RCC_BDCR, RCC_BDCR_VSWRST);
+ mmio_clrbits_32(rcc_base + RCC_BDCR, RCC_BDCR_VSWRST);
}
generic_delay_timer_init();
diff --git a/plat/st/stm32mp1/stm32mp1_def.h b/plat/st/stm32mp1/stm32mp1_def.h
index beb588c..8d7cea3 100644
--- a/plat/st/stm32mp1/stm32mp1_def.h
+++ b/plat/st/stm32mp1/stm32mp1_def.h
@@ -253,6 +253,7 @@
/*******************************************************************************
* Device Tree defines
******************************************************************************/
+#define DT_PWR_COMPAT "st,stm32mp1-pwr"
#define DT_RCC_CLK_COMPAT "st,stm32mp1-rcc"
#endif /* STM32MP1_DEF_H */
diff --git a/plat/st/stm32mp1/stm32mp1_pm.c b/plat/st/stm32mp1/stm32mp1_pm.c
index c4d0232..3262607 100644
--- a/plat/st/stm32mp1/stm32mp1_pm.c
+++ b/plat/st/stm32mp1/stm32mp1_pm.c
@@ -159,7 +159,8 @@
static void __dead2 stm32_system_reset(void)
{
- mmio_setbits_32(RCC_BASE + RCC_MP_GRSTCSETR, RCC_MP_GRSTCSETR_MPSYSRST);
+ mmio_setbits_32(stm32mp_rcc_base() + RCC_MP_GRSTCSETR,
+ RCC_MP_GRSTCSETR_MPSYSRST);
/* Loop in case system reset is not immediately caught */
for ( ; ; ) {