stm32mp1: use functions to retrieve some peripheral addresses
PWR, RCC, DDRPHYC & DDRCTRL addresses can be retrieved from device tree.
Platform asserts the value read from the DT are the SoC addresses.
Change-Id: I43f0890b51918a30c87ac067d3780ab27a0f59de
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
diff --git a/plat/st/common/include/stm32mp_common.h b/plat/st/common/include/stm32mp_common.h
index 5f54b10..fa0b630 100644
--- a/plat/st/common/include/stm32mp_common.h
+++ b/plat/st/common/include/stm32mp_common.h
@@ -16,6 +16,18 @@
void stm32mp_save_boot_ctx_address(uintptr_t address);
uintptr_t stm32mp_get_boot_ctx_address(void);
+/* Return the base address of the DDR controller */
+uintptr_t stm32mp_ddrctrl_base(void);
+
+/* Return the base address of the DDR PHY */
+uintptr_t stm32mp_ddrphyc_base(void);
+
+/* Return the base address of the PWR peripheral */
+uintptr_t stm32mp_pwr_base(void);
+
+/* Return the base address of the RCC peripheral */
+uintptr_t stm32mp_rcc_base(void);
+
/*
* Platform util functions for the GPIO driver
* @bank: Target GPIO bank ID as per DT bindings
diff --git a/plat/st/common/include/stm32mp_dt.h b/plat/st/common/include/stm32mp_dt.h
index 56357db..3415b05 100644
--- a/plat/st/common/include/stm32mp_dt.h
+++ b/plat/st/common/include/stm32mp_dt.h
@@ -38,6 +38,9 @@
int dt_get_stdout_uart_info(struct dt_node_info *info);
int dt_get_stdout_node_offset(void);
uint32_t dt_get_ddr_size(void);
+uintptr_t dt_get_ddrctrl_base(void);
+uintptr_t dt_get_ddrphyc_base(void);
+uintptr_t dt_get_pwr_base(void);
const char *dt_get_board_model(void);
#endif /* STM32MP_DT_H */
diff --git a/plat/st/common/stm32mp_common.c b/plat/st/common/stm32mp_common.c
index aecef47..2aba41e 100644
--- a/plat/st/common/stm32mp_common.c
+++ b/plat/st/common/stm32mp_common.c
@@ -10,6 +10,7 @@
#include <arch_helpers.h>
#include <common/debug.h>
+#include <drivers/st/stm32mp_clkfunc.h>
#include <plat/common/platform.h>
uintptr_t plat_get_ns_image_entrypoint(void)
@@ -34,6 +35,58 @@
return boot_ctx_address;
}
+uintptr_t stm32mp_ddrctrl_base(void)
+{
+ static uintptr_t ddrctrl_base;
+
+ if (ddrctrl_base == 0) {
+ ddrctrl_base = dt_get_ddrctrl_base();
+
+ assert(ddrctrl_base == DDRCTRL_BASE);
+ }
+
+ return ddrctrl_base;
+}
+
+uintptr_t stm32mp_ddrphyc_base(void)
+{
+ static uintptr_t ddrphyc_base;
+
+ if (ddrphyc_base == 0) {
+ ddrphyc_base = dt_get_ddrphyc_base();
+
+ assert(ddrphyc_base == DDRPHYC_BASE);
+ }
+
+ return ddrphyc_base;
+}
+
+uintptr_t stm32mp_pwr_base(void)
+{
+ static uintptr_t pwr_base;
+
+ if (pwr_base == 0) {
+ pwr_base = dt_get_pwr_base();
+
+ assert(pwr_base == PWR_BASE);
+ }
+
+ return pwr_base;
+}
+
+uintptr_t stm32mp_rcc_base(void)
+{
+ static uintptr_t rcc_base;
+
+ if (rcc_base == 0) {
+ rcc_base = fdt_rcc_read_addr();
+
+ assert(rcc_base == RCC_BASE);
+ }
+
+ return rcc_base;
+}
+
uintptr_t stm32_get_gpio_bank_base(unsigned int bank)
{
if (bank == GPIO_BANK_Z) {
diff --git a/plat/st/common/stm32mp_dt.c b/plat/st/common/stm32mp_dt.c
index c0b0518..e64433b 100644
--- a/plat/st/common/stm32mp_dt.c
+++ b/plat/st/common/stm32mp_dt.c
@@ -292,6 +292,73 @@
}
/*******************************************************************************
+ * This function gets DDRCTRL base address information from the DT.
+ * Returns value on success, and 0 on failure.
+ ******************************************************************************/
+uintptr_t dt_get_ddrctrl_base(void)
+{
+ int node;
+ uint32_t array[4];
+
+ node = fdt_node_offset_by_compatible(fdt, -1, DT_DDR_COMPAT);
+ if (node < 0) {
+ INFO("%s: Cannot read DDR node in DT\n", __func__);
+ return 0;
+ }
+
+ if (fdt_read_uint32_array(node, "reg", array, 4) < 0) {
+ return 0;
+ }
+
+ return array[0];
+}
+
+/*******************************************************************************
+ * This function gets DDRPHYC base address information from the DT.
+ * Returns value on success, and 0 on failure.
+ ******************************************************************************/
+uintptr_t dt_get_ddrphyc_base(void)
+{
+ int node;
+ uint32_t array[4];
+
+ node = fdt_node_offset_by_compatible(fdt, -1, DT_DDR_COMPAT);
+ if (node < 0) {
+ INFO("%s: Cannot read DDR node in DT\n", __func__);
+ return 0;
+ }
+
+ if (fdt_read_uint32_array(node, "reg", array, 4) < 0) {
+ return 0;
+ }
+
+ return array[2];
+}
+
+/*******************************************************************************
+ * This function gets PWR base address information from the DT.
+ * Returns value on success, and 0 on failure.
+ ******************************************************************************/
+uintptr_t dt_get_pwr_base(void)
+{
+ int node;
+ const fdt32_t *cuint;
+
+ node = fdt_node_offset_by_compatible(fdt, -1, DT_PWR_COMPAT);
+ if (node < 0) {
+ INFO("%s: Cannot read PWR node in DT\n", __func__);
+ return 0;
+ }
+
+ cuint = fdt_getprop(fdt, node, "reg", NULL);
+ if (cuint == NULL) {
+ return 0;
+ }
+
+ return fdt32_to_cpu(*cuint);
+}
+
+/*******************************************************************************
* This function retrieves board model from DT
* Returns string taken from model node, NULL otherwise
******************************************************************************/