ti: k3: drivers: ti_sci: Use non-blocking TI-SCI messages for power down
Now that we have non-blocking TI-SCI functions we can initiate the shutdown
sequence from the PSCI handler without needing the ti_sci_proc_shutdown
helper function, which is removed. This gives us the greater control and
flexibility that will be needed when cluster power down sequences are added.
Signed-off-by: Andrew F. Davis <afd@ti.com>
diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci.c b/plat/ti/k3/common/drivers/ti_sci/ti_sci.c
index 0f0a6f0..df0b794 100644
--- a/plat/ti/k3/common/drivers/ti_sci/ti_sci.c
+++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci.c
@@ -1681,88 +1681,6 @@
}
/**
- * ti_sci_proc_shutdown() - Shutdown Processor without waiting for ACKs
- *
- * @proc_id: Processor ID this request is for
- * @dev_id: Device identifier this request is for
- *
- * Return: 0 if all goes well, else appropriate error message
- */
-int ti_sci_proc_shutdown(uint8_t proc_id, uint32_t dev_id)
-{
- struct ti_sci_msg_req_wait_proc_boot_status wait_req;
- struct ti_sci_msg_req_set_device_state set_req;
- /*
- * We will not be waiting for this response, but declare one anyway
- * to pass to the setup function so the checks will still pass
- */
- struct ti_sci_msg_hdr resp;
-
- struct ti_sci_xfer xfer;
- int ret;
-
- /* Start by sending wait command */
-
- /* Setup with NORESPONSE flag to keep response queue clean */
- ret = ti_sci_setup_one_xfer(TISCI_MSG_WAIT_PROC_BOOT_STATUS,
- TI_SCI_FLAG_REQ_GENERIC_NORESPONSE,
- &wait_req, sizeof(wait_req),
- &resp, sizeof(resp),
- &xfer);
- if (ret) {
- ERROR("Message alloc failed (%d)\n", ret);
- return ret;
- }
-
- wait_req.processor_id = proc_id;
- /*
- * Wait maximum time to give us the best chance to get
- * to WFI before this command timeouts
- */
- wait_req.delay_before_iterations_us = UINT8_MAX;
- wait_req.num_wait_iterations = UINT8_MAX;
- wait_req.delay_per_iteration_us = UINT8_MAX; /* TODO: optimize time */
- wait_req.num_match_iterations = 2;
- wait_req.status_flags_1_set_all_wait = 0;
- /* Wait for either WFE or WFI */
- wait_req.status_flags_1_set_any_wait = PROC_BOOT_STATUS_FLAG_ARMV8_WFE |
- PROC_BOOT_STATUS_FLAG_ARMV8_WFI;
- wait_req.status_flags_1_clr_all_wait = 0;
- wait_req.status_flags_1_clr_any_wait = 0;
-
- /* Send wait message */
- ret = k3_sec_proxy_send(SP_HIGH_PRIORITY, &xfer.tx_message);
- if (ret) {
- ERROR("Message sending failed (%d)\n", ret);
- return ret;
- }
-
- /* Now queue up the shutdown request */
- ret = ti_sci_setup_one_xfer(TI_SCI_MSG_SET_DEVICE_STATE,
- TI_SCI_FLAG_REQ_GENERIC_NORESPONSE,
- &set_req, sizeof(set_req),
- &resp, sizeof(resp),
- &xfer);
- if (ret) {
- ERROR("Message alloc failed (%d)\n", ret);
- return ret;
- }
-
- set_req.id = dev_id;
- set_req.state = MSG_DEVICE_SW_STATE_AUTO_OFF;
-
- /* Send shutdown message */
- ret = k3_sec_proxy_send(SP_HIGH_PRIORITY, &xfer.tx_message);
- if (ret) {
- ERROR("Message sending failed (%d)\n", ret);
- return ret;
- }
-
- /* Return without waiting for responses */
- return 0;
-}
-
-/**
* ti_sci_init() - Basic initialization
*
* Return: 0 if all goes well, else appropriate error message
diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci.h b/plat/ti/k3/common/drivers/ti_sci/ti_sci.h
index a179c13..c7b09b3 100644
--- a/plat/ti/k3/common/drivers/ti_sci/ti_sci.h
+++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci.h
@@ -205,7 +205,6 @@
uint32_t status_flags_1_set_any_wait,
uint32_t status_flags_1_clr_all_wait,
uint32_t status_flags_1_clr_any_wait);
-int ti_sci_proc_shutdown(uint8_t proc_id, uint32_t dev_id);
/**
* ti_sci_init() - Basic initialization
diff --git a/plat/ti/k3/common/k3_psci.c b/plat/ti/k3/common/k3_psci.c
index 235e639..afe465e 100644
--- a/plat/ti/k3/common/k3_psci.c
+++ b/plat/ti/k3/common/k3_psci.c
@@ -13,6 +13,7 @@
#include <lib/psci/psci.h>
#include <plat/common/platform.h>
+#include <ti_sci_protocol.h>
#include <k3_gicv3.h>
#include <ti_sci.h>
@@ -90,9 +91,24 @@
proc = PLAT_PROC_START_ID + core_id;
device = PLAT_PROC_DEVICE_START_ID + core_id;
- ret = ti_sci_proc_shutdown(proc, device);
+ /* Start by sending wait for WFI command */
+ ret = ti_sci_proc_wait_boot_status_no_wait(proc,
+ /*
+ * Wait maximum time to give us the best chance to get
+ * to WFI before this command timeouts
+ */
+ UINT8_MAX, 100, UINT8_MAX, UINT8_MAX,
+ /* Wait for WFI */
+ PROC_BOOT_STATUS_FLAG_ARMV8_WFI, 0, 0, 0);
+ if (ret) {
+ ERROR("Sending wait for WFI failed (%d)\n", ret);
+ return;
+ }
+
+ /* Now queue up the core shutdown request */
+ ret = ti_sci_device_put_no_wait(device);
if (ret) {
- ERROR("Request to stop core failed: %d\n", ret);
+ ERROR("Sending core shutdown message failed (%d)\n", ret);
return;
}
}