/*
 * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * Redistributions of source code must retain the above copyright notice, this
 * list of conditions and the following disclaimer.
 *
 * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * Neither the name of ARM nor the names of its contributors may be used
 * to endorse or promote products derived from this software without specific
 * prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#include <arch_helpers.h>
#include <asm_macros.S>

	.globl	dcisw
	.globl	dccisw
	.globl	dccsw
	.globl	dccvac
	.globl	dcivac
	.globl	dccivac
	.globl	dccvau
	.globl	dczva
	.globl	flush_dcache_range
	.globl	inv_dcache_range
	.globl	dcsw_op_louis
	.globl	dcsw_op_all

	.section	.text, "ax"; .align 3

dcisw: ; .type dcisw, %function
	dc	isw, x0
	dsb	sy
	isb
	ret


dccisw: ; .type dccisw, %function
	dc	cisw, x0
	dsb	sy
	isb
	ret


dccsw: ; .type dccsw, %function
	dc	csw, x0
	dsb	sy
	isb
	ret


dccvac: ; .type dccvac, %function
	dc	cvac, x0
	dsb	sy
	isb
	ret


dcivac: ; .type dcivac, %function
	dc	ivac, x0
	dsb	sy
	isb
	ret


dccivac: ; .type dccivac, %function
	dc	civac, x0
	dsb	sy
	isb
	ret


dccvau: ; .type dccvau, %function
	dc	cvau, x0
	dsb	sy
	isb
	ret


dczva: ; .type dczva, %function
	dc	zva, x0
	dsb	sy
	isb
	ret


	/* ------------------------------------------
	 * Clean+Invalidate from base address till
	 * size. 'x0' = addr, 'x1' = size
	 * ------------------------------------------
	 */
flush_dcache_range: ; .type flush_dcache_range, %function
	dcache_line_size x2, x3
	add	x1, x0, x1
	sub	x3, x2, #1
	bic	x0, x0, x3
flush_loop:
	dc	civac, x0
	add	x0, x0, x2
	cmp	x0, x1
	b.lo    flush_loop
	dsb	sy
	ret


	/* ------------------------------------------
	 * Invalidate from base address till
	 * size. 'x0' = addr, 'x1' = size
	 * ------------------------------------------
	 */
inv_dcache_range: ; .type inv_dcache_range, %function
	dcache_line_size x2, x3
	add	x1, x0, x1
	sub	x3, x2, #1
	bic	x0, x0, x3
inv_loop:
	dc	ivac, x0
	add	x0, x0, x2
	cmp	x0, x1
	b.lo    inv_loop
	dsb	sy
	ret


	/* ------------------------------------------
	 * Data cache operations by set/way to the
	 * level specified
	 * ------------------------------------------
	 * ----------------------------------
	 * Call this func with the clidr in
	 * x0, starting cache level in x10,
	 * last cache level in x3 & cm op in
	 * x14
	 * ----------------------------------
	 */
dcsw_op: ; .type dcsw_op, %function
all_start_at_level:
	add	x2, x10, x10, lsr #1            // work out 3x current cache level
	lsr	x1, x0, x2                      // extract cache type bits from clidr
	and	x1, x1, #7                      // mask of the bits for current cache only
	cmp	x1, #2                          // see what cache we have at this level
	b.lt	skip                            // skip if no cache, or just i-cache
	msr	csselr_el1, x10                 // select current cache level in csselr
	isb                                     // isb to sych the new cssr&csidr
	mrs	x1, ccsidr_el1                  // read the new ccsidr
	and	x2, x1, #7                      // extract the length of the cache lines
	add	x2, x2, #4                      // add 4 (line length offset)
	mov	x4, #0x3ff
	and	x4, x4, x1, lsr #3              // find maximum number on the way size
	clz	w5, w4                          // find bit position of way size increment
	mov	x7, #0x7fff
	and	x7, x7, x1, lsr #13             // extract max number of the index size
loop2:
	mov	x9, x4                          // create working copy of max way size
loop3:
	lsl	x6, x9, x5
	orr	x11, x10, x6                    // factor way and cache number into x11
	lsl	x6, x7, x2
	orr	x11, x11, x6                    // factor index number into x11
	mov	x12, x0
	mov	x13, x30 // lr
	mov	x0, x11
	blr	x14
	mov	x0, x12
	mov	x30, x13 // lr
	subs	x9, x9, #1                      // decrement the way
	b.ge    loop3
	subs	x7, x7, #1                      // decrement the index
	b.ge    loop2
skip:
	add	x10, x10, #2                    // increment cache number
	cmp	x3, x10
	b.gt    all_start_at_level
finished:
	mov	x10, #0                         // swith back to cache level 0
	msr	csselr_el1, x10                 // select current cache level in csselr
	dsb	sy
	isb
	ret


do_dcsw_op: ; .type do_dcsw_op, %function
	cbz	x3, exit
	cmp	x0, #DCISW
	b.eq	dc_isw
	cmp	x0, #DCCISW
	b.eq	dc_cisw
	cmp	x0, #DCCSW
	b.eq	dc_csw
dc_isw:
	mov	x0, x9
	adr	x14, dcisw
	b	dcsw_op
dc_cisw:
	mov	x0, x9
	adr	x14, dccisw
	b	dcsw_op
dc_csw:
	mov	x0, x9
	adr	x14, dccsw
	b	dcsw_op
exit:
	ret


dcsw_op_louis: ; .type dcsw_op_louis, %function
	dsb	sy
	setup_dcsw_op_args x10, x3, x9, #LOUIS_SHIFT, #CLIDR_FIELD_WIDTH, #LEVEL_SHIFT
	b	do_dcsw_op


dcsw_op_all: ; .type dcsw_op_all, %function
	dsb	sy
	setup_dcsw_op_args x10, x3, x9, #LOC_SHIFT, #CLIDR_FIELD_WIDTH, #LEVEL_SHIFT
	b	do_dcsw_op