diff --git a/plat/hisilicon/hikey960/hikey960_bl1_setup.c b/plat/hisilicon/hikey960/hikey960_bl1_setup.c
index 6a07f09..a928576 100644
--- a/plat/hisilicon/hikey960/hikey960_bl1_setup.c
+++ b/plat/hisilicon/hikey960/hikey960_bl1_setup.c
@@ -211,6 +211,7 @@
 	hikey960_peri_init();
 	hikey960_ufs_init();
 	hikey960_pinmux_init();
+	hikey960_gpio_init();
 	hikey960_io_setup();
 }
 
diff --git a/plat/hisilicon/hikey960/hikey960_bl2_setup.c b/plat/hisilicon/hikey960/hikey960_bl2_setup.c
index 6e726d2..f57dd63 100644
--- a/plat/hisilicon/hikey960/hikey960_bl2_setup.c
+++ b/plat/hisilicon/hikey960/hikey960_bl2_setup.c
@@ -328,6 +328,7 @@
 	hikey960_tzc_init();
 	hikey960_peri_init();
 	hikey960_pinmux_init();
+	hikey960_gpio_init();
 	hikey960_init_ufs();
 	hikey960_io_setup();
 }
diff --git a/plat/hisilicon/hikey960/hikey960_bl_common.c b/plat/hisilicon/hikey960/hikey960_bl_common.c
index f192c1e..0cee69f 100644
--- a/plat/hisilicon/hikey960/hikey960_bl_common.c
+++ b/plat/hisilicon/hikey960/hikey960_bl_common.c
@@ -8,6 +8,7 @@
 #include <delay_timer.h>
 #include <hi3660.h>
 #include <mmio.h>
+#include <pl061_gpio.h>
 
 #include "hikey960_private.h"
 
@@ -439,3 +440,34 @@
 	/* GPIO213 - PCIE_CLKREQ_N */
 	mmio_write_32(IOMG_AO_033_REG, 1);
 }
+
+void hikey960_gpio_init(void)
+{
+	pl061_gpio_init();
+	pl061_gpio_register(GPIO0_BASE, 0);
+	pl061_gpio_register(GPIO1_BASE, 1);
+	pl061_gpio_register(GPIO2_BASE, 2);
+	pl061_gpio_register(GPIO3_BASE, 3);
+	pl061_gpio_register(GPIO4_BASE, 4);
+	pl061_gpio_register(GPIO5_BASE, 5);
+	pl061_gpio_register(GPIO6_BASE, 6);
+	pl061_gpio_register(GPIO7_BASE, 7);
+	pl061_gpio_register(GPIO8_BASE, 8);
+	pl061_gpio_register(GPIO9_BASE, 9);
+	pl061_gpio_register(GPIO10_BASE, 10);
+	pl061_gpio_register(GPIO11_BASE, 11);
+	pl061_gpio_register(GPIO12_BASE, 12);
+	pl061_gpio_register(GPIO13_BASE, 13);
+	pl061_gpio_register(GPIO14_BASE, 14);
+	pl061_gpio_register(GPIO15_BASE, 15);
+	pl061_gpio_register(GPIO16_BASE, 16);
+	pl061_gpio_register(GPIO17_BASE, 17);
+	pl061_gpio_register(GPIO18_BASE, 18);
+	pl061_gpio_register(GPIO19_BASE, 19);
+	pl061_gpio_register(GPIO20_BASE, 20);
+	pl061_gpio_register(GPIO21_BASE, 21);
+
+	/* PCIE_PERST_N output low */
+	gpio_set_direction(89, GPIO_DIR_OUT);
+	gpio_set_value(89, GPIO_LEVEL_LOW);
+}
diff --git a/plat/hisilicon/hikey960/hikey960_private.h b/plat/hisilicon/hikey960/hikey960_private.h
index 30166e5..e2425fc 100644
--- a/plat/hisilicon/hikey960/hikey960_private.h
+++ b/plat/hisilicon/hikey960/hikey960_private.h
@@ -32,6 +32,7 @@
 void hikey960_tzc_init(void);
 void hikey960_peri_init(void);
 void hikey960_pinmux_init(void);
+void hikey960_gpio_init(void);
 void set_retention_ticks(unsigned int val);
 void clr_retention_ticks(unsigned int val);
 void clr_ex(void);
diff --git a/plat/hisilicon/hikey960/include/hi3660.h b/plat/hisilicon/hikey960/include/hi3660.h
index ab7b8aa..61b80b0 100644
--- a/plat/hisilicon/hikey960/include/hi3660.h
+++ b/plat/hisilicon/hikey960/include/hi3660.h
@@ -240,6 +240,27 @@
 #define PCTRL_PERI_CTRL3_REG		(PCTRL_REG_BASE + 0x010)
 #define PCTRL_PERI_CTRL24_REG		(PCTRL_REG_BASE + 0x064)
 
+#define GPIO0_BASE			UL(0xE8A0B000)
+#define GPIO1_BASE			UL(0xE8A0C000)
+#define GPIO2_BASE			UL(0xE8A0D000)
+#define GPIO3_BASE			UL(0xE8A0E000)
+#define GPIO4_BASE			UL(0xE8A0F000)
+#define GPIO5_BASE			UL(0xE8A10000)
+#define GPIO6_BASE			UL(0xE8A11000)
+#define GPIO7_BASE			UL(0xE8A12000)
+#define GPIO8_BASE			UL(0xE8A13000)
+#define GPIO9_BASE			UL(0xE8A14000)
+#define GPIO10_BASE			UL(0xE8A15000)
+#define GPIO11_BASE			UL(0xE8A16000)
+#define GPIO12_BASE			UL(0xE8A17000)
+#define GPIO13_BASE			UL(0xE8A18000)
+#define GPIO14_BASE			UL(0xE8A19000)
+#define GPIO15_BASE			UL(0xE8A1A000)
+#define GPIO16_BASE			UL(0xE8A1B000)
+#define GPIO17_BASE			UL(0xE8A1C000)
+#define GPIO20_BASE			UL(0xE8A1F000)
+#define GPIO21_BASE			UL(0xE8A20000)
+
 #define TZC_REG_BASE			0xE8A21000
 #define TZC_STAT0_REG			(TZC_REG_BASE + 0x800)
 #define TZC_EN0_REG			(TZC_REG_BASE + 0x804)
@@ -316,6 +337,9 @@
 #define MASK_UFS_DEVICE_RESET			(1 << 16)
 #define BIT_UFS_DEVICE_RESET			(1 << 0)
 
+#define GPIO18_BASE			UL(0xFF3B4000)
+#define GPIO19_BASE			UL(0xFF3B5000)
+
 #define IOMG_FIX_REG_BASE		0xFF3B6000
 
 /* GPIO150: LED */
diff --git a/plat/hisilicon/hikey960/platform.mk b/plat/hisilicon/hikey960/platform.mk
index 8b03e55..5fa7218 100644
--- a/plat/hisilicon/hikey960/platform.mk
+++ b/plat/hisilicon/hikey960/platform.mk
@@ -22,12 +22,14 @@
 
 CRASH_CONSOLE_BASE		:=	PL011_UART6_BASE
 COLD_BOOT_SINGLE_CPU		:=	1
+PLAT_PL061_MAX_GPIOS		:=	176
 PROGRAMMABLE_RESET_ADDRESS	:=	1
 ENABLE_SVE_FOR_NS		:=	0
 
 # Process flags
 $(eval $(call add_define,HIKEY960_TSP_RAM_LOCATION_ID))
 $(eval $(call add_define,CRASH_CONSOLE_BASE))
+$(eval $(call add_define,PLAT_PL061_MAX_GPIOS))
 
 # Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
 # in the FIP if the platform requires.
@@ -58,6 +60,8 @@
 				plat/common/plat_gicv2.c
 
 BL1_SOURCES		+=	bl1/tbbr/tbbr_img_desc.c		\
+				drivers/arm/pl061/pl061_gpio.c		\
+				drivers/gpio/gpio.c			\
 				drivers/io/io_block.c			\
 				drivers/io/io_fip.c			\
 				drivers/io/io_storage.c			\
@@ -71,6 +75,8 @@
 				${HIKEY960_GIC_SOURCES}
 
 BL2_SOURCES		+=	common/desc_image_load.c		\
+				drivers/arm/pl061/pl061_gpio.c		\
+				drivers/gpio/gpio.c			\
 				drivers/io/io_block.c			\
 				drivers/io/io_fip.c			\
 				drivers/io/io_storage.c			\